Search Results

Search found 1370 results on 55 pages for 'nat gr'.

Page 16/55 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• find how many NATs between my home machine and Internet [closed]

  - by sthustfo

  Hi all, Is there any tool/utility that can help me find how many NATs exist between my home machine and public Internet? Any reference to any protocols that would help me to figure this out would also be useful. Thanks in advance,

  Read the article

• Indy FTP, large files and NAT routers

  - by Lobuno

  Hello! I have been using Indy to transfers files via FTP for years now but have not been able to find a satisfactory solution for the following problem. When a user is uploading a large file, behind a router, sometimes the following happens: the file is uploaded OK, but under the mean time the command channel gets disconnected because of a timeout. Normally this doesn't happens with a direct connection to the server, because the server "knows" that a transfer is being taking place on the data channel. Some routers are not aware of this, though and the command channel is closed. Many programs send a NOOP command periodically to keep the command channel alive even if this is not part of the standard FTP specification. My question: how do I do that? Do I send the NOOP command in the OnWork event? Does this cause any collateral damage in some way, like, do I need to process some response? How do I best solve this problem?

  Read the article

• "_FILE_AND_LINE_ is not defined in this scope" (compiling RakNet NAT examples in OS X)

  - by Michael F

  Hello! I'm working on a RakNet-based project (using 3.8 on OS X 10.6), and I'm trying to work through the various examples that demonstrate the parts of RakNet I want to use. For the "NatCompleteClient" example, I've imported the source into a command-line project in XCode, along with the UPNP dependency. At compile time I've had a few errors in the UPNP section, though, and I can't find any guidance on this. In UPNPPortForwarder.mm, there are 7 lines that use _FILE_AND_LINE_, and the compiler is not happy; for example on line 232: foundInterfaces.Deallocate(r1,_FILE_AND_LINE_); causes: UPNPPortForwarder.mm:232: error: '_FILE_AND_LINE_' was not declared in this scope Can anyone tell me what this is all about? That variable doesn't seem to get talked about very often... or Google doesn't like to find it.

  Read the article

• Redirect/Subdomain with .htaccess

  - by fractalbit

  What i have currently: A wildcard dns record. So that every subdomain points to www.galop.gr A dynamically (php) generated .htacces file where i append the following code for every subdomain i want working: RewriteCond %{HTTP_HOST} ^fractalbit.galop.gr$ [OR] RewriteCond %{HTTP_HOST} ^www.fractalbit.galop.gr$ RewriteRule ^/?$ http://www.galop.gr/index.php?user=1 [R=301] Everything is working fine, i just want something more if it is possible. Right now, if someone enters fractalbit.galop.gr will be redirected to http://www.galop.gr/index.php?user=1 Is it possible to do this BUT keep fractalbit.galop.gr to the address bar of the browser? Thanks for any replies.

  Read the article

• Setting up VPN client: L2TP with IPsec

  - by zachar

  I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to authenticate Information that MS-CHAPv2 is used Login and Password to VPN I was trying to achive that with network manager and with L2TP IPsec VPN Manager 1.0.9 but at failed. There is some logged information from L2TP IPsec VPN Manager 1.0.9: Nov 09 15:21:46.854 ipsec_setup: Stopping Openswan IPsec... Nov 09 15:21:48.088 Stopping xl2tpd: xl2tpd. Nov 09 15:21:48.132 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 09 15:21:48.308 ipsec__plutorun: Starting Pluto subsystem... Nov 09 15:21:48.318 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 09 15:21:48.338 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 09 15:21:48.349 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 09 15:21:48.994 104 "my_vpn_name" #1: STATE_MAIN_I1: initiate Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [RFC 3947] method set to=109 Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [Dead Peer Detection] Nov 09 15:21:48.994 106 "my_vpn_name" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Nov 09 15:21:48.994 003 "my_vpn_name" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Nov 09 15:21:48.994 108 "my_vpn_name" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Nov 09 15:21:48.994 004 "my_vpn_name" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Nov 09 15:21:48.995 117 "my_vpn_name" #2: STATE_QUICK_I1: initiate Nov 09 15:21:48.995 004 "my_vpn_name" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0c96795d <0x483e1a42 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Nov 09 15:21:49.996 [ERROR 210] Failed to open l2tp control file 'c my_vpn_name' and from syslog: Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup stop Nov 9 15:21:46 o99 ipsec_setup: Stopping Openswan IPsec... Nov 9 15:21:48 o99 kernel: [ 4350.245171] NET: Unregistered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec stopped Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd stop Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Closing client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup start Nov 9 15:21:48 o99 kernel: [ 4350.312483] NET: Registered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 9 15:21:48 o99 ipsec_setup: Using NETKEY(XFRM) stack Nov 9 15:21:48 o99 kernel: [ 4350.410774] Initializing XFRM netlink socket Nov 9 15:21:48 o99 kernel: [ 4350.413601] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 kernel: [ 4350.427311] padlock: VIA PadLock Hash Engine not detected. Nov 9 15:21:48 o99 kernel: [ 4350.441533] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec started Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup start finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd start Nov 9 15:21:48 o99 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 pluto: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd start finished with exit code 0 Nov 9 15:21:48 o99 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --ready Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --ready finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --up my_vpn_name Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --up my_vpn_name finished with exit code 0 Nov 9 15:21:49 o99 L2tpIPsecVpnControlDaemon: Closing client connection Can anyone tell me something more about that? Where is the mistake?

  Read the article

• iproute2 rules and iptables NAT... what is the difference?

  - by Jakobud

  We have 2 different ISP connections. Our previous "IT guy" setup our firewall like so: When /etc/rc.local was executed on startup, it did a bunch of ip rule add and ip route add commands in order to route certain internal hosts to use certain ISP connections. Then at the end of /etc/rc.local, he executed our iptables firewall rules that were generated by Firewall Builder. These iptables rules have both Policy and NAT rules setup in them. What I don't understand, is why did he use iproute2 to specify rules and routes but also specify NAT rules for iptables? Why didn't he just do it all in one or the other instead of using them both? Could he have got rid of the iproute2 rules and routes and just put all those same rules into the iptables NAT settings?

  Read the article

• Getting my string value from my form into my class( not another form)

  - by jovany

  Hello all, I have a question regarding the some data which is being transfered from one form to my class. It's not going quite the way i'd like to , so I figured maybe there is someone who could help me. This is my code in my class Public Class DrawableTextBox Inherits Drawable Dim i_testString As Integer Private s_InsertLabel As String Private drawFont As Font Public Sub New(ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0, Optional ByVal new_x1 As Integer = 0, Optional ByVal new_y1 As Integer = 0, Optional ByVal new_x2 As Integer = 1, Optional ByVal new_y2 As Integer = 1) MyBase.New(fore_color, fill_color, line_width) X1 = new_x1 Y1 = new_y1 X2 = new_x2 Y2 = new_y2 Trace.WriteLine(s_InsertLabel) End Sub Friend WriteOnly Property _textBox() As String Set(ByVal Value As String) s_InsertLabel = Value Trace.WriteLine(s_InsertLabel) End Set End Property ' Draw the object on this Graphics surface. Public Overrides Sub Draw(ByVal gr As System.Drawing.Graphics) ' Make a Rectangle representing this rectangle. Dim rect As Rectangle = GetBounds() ' Fill the rectangle as usual. Dim fill_brush As New SolidBrush(FillColor) gr.FillRectangle(fill_brush, rect) fill_brush.Dispose() ' See if we're selected. If IsSelected Then ' Draw the rectangle highlighted. Dim highlight_pen As New Pen(Color.Yellow, LineWidth) gr.DrawRectangle(highlight_pen, rect) highlight_pen.Dispose() ' Draw grab handles. Trace.WriteLine("drawing the lines for my textbox") DrawGrabHandle(gr, X1, Y1) DrawGrabHandle(gr, X1, Y2) DrawGrabHandle(gr, X2, Y2) DrawGrabHandle(gr, X2, Y1) Else 'TextBox() Dim fg_pen As New Pen(Color.Red, LineWidth) 'Dim fontSize As Single = 0.1 + ((Y2 - Y1) / 2) Dim fontSize As Single = 20 Try Dim drawFont As New Font("Arial", fontSize, FontStyle.Bold) Trace.WriteLine(s_InsertLabel) gr.DrawString(s_InsertLabel, drawFont, Brushes.Brown, X1, Y1) Catch ex As ArgumentException End Try gr.DrawRectangle(Pens.Azure, rect) ' gr.DrawRectangle(fg_pen, rect) fg_pen.Dispose() End If End Sub Public Function GetValueString(ByVal ValueType As String) Return ValueType End Function ' Return the object's bounding rectangle. Public Overrides Function GetBounds() As System.Drawing.Rectangle Return New Rectangle( _ Min(X1, X2), _ Min(Y1, Y2), _ Abs(100), _ Abs(30)) Trace.WriteLine("don't forget to make variables in GetBounds DrawableTextbox") End Function ' Return True if this point is on the object. Public Overrides Function IsAt(ByVal x As Integer, ByVal y As Integer) As Boolean Return (x >= Min(X1, X2)) AndAlso _ (x <= Max(X1, X2)) AndAlso _ (y >= Min(Y1, Y2)) AndAlso _ (y <= Max(Y1, Y2)) End Function ' Move the second point. Public Overrides Sub NewPoint(ByVal x As Integer, ByVal y As Integer) X2 = x Y2 = y End Sub ' Return True if the object is empty (e.g. a zero-length line). Public Overrides Function IsEmpty() As Boolean Return (X1 = X2) AndAlso (Y1 = Y2) End Function End Class I've got a form with a textbox( form1) in which the text is being inserted and passed through a buttonclick (al via properties). As you can see I've placed several traces and in the property of the class my trace works fine , however if I look in my Draw function it is already gone. And I get a blank trace. Does anyone know what's happening here. thanks in advance. (forgive me I'm new )

  Read the article

• Java MVC - How to divide a done text game into MVC?

  - by Zopyrus

  Been sitting here for hours now trying to figure this out, so a bit sympathy for this large question. :) The Goal: I simply want to divide my done code into MVC (Model View Controller) parts. I have the game logics done and text based - the code works fine. The Problem: Well, I want to implement this code into MVC, but where do explain for the MODEL that it should use text-based? Because the VIEW is only for the layout (graphically) correct? I am having a REALLY hard time figuring out where to begin at all. Any pointers would be so nice! Here is my game logics code: import mind.*; import javax.swing.*; import java.util.*; import java.lang.*; import java.awt.*; public class Drive { String[] mellan; boolean gameEnd, checkempty, checkempty2, enemy, enemy2; String gr,rd,tom; int digits; public Drive() { // Gamepieces in textform gr="G"; rd="R"; tom=" "; mellan = new String[7]; String[] begin = {gr,gr,gr,tom,rd,rd,rd}; String[] end = {rd,rd,rd,tom,gr,gr,gr}; //input Scanner in = new Scanner(System.in); mellan=begin; gameEnd=false; while (gameEnd == false) { for(int i=0; i<mellan.length; i++) { System.out.print(mellan[i]); } System.out.print(" Choose 0-6: "); digits = in.nextInt(); move(); checkWin(); } } void move() { //BOOLEAN for gameruls!!! checkempty = digits<6 && mellan[digits+1]==tom; checkempty2 = digits>0 && mellan[digits-1]==tom; enemy = (mellan[digits]==gr && mellan[digits+1]==rd && mellan[digits+2]==tom); enemy2 = (mellan[digits]==rd && mellan[digits-1]==gr && mellan[digits-2]==tom); if(checkempty) { mellan[digits+1]=mellan[digits]; mellan[digits]=tom; } else if (checkempty2) { mellan[digits-1]=mellan[digits]; mellan[digits]=tom; } else if (enemy) { mellan[digits+2]=mellan[digits]; mellan[digits]=tom; } else if (enemy2) { mellan[digits-2]=mellan[digits]; mellan[digits]=tom; } } void checkWin() { String[] end = {rd,rd,rd,tom,gr,gr,gr}; for (int i=0; i<mellan.length; i++){ } if (Arrays.equals(mellan,end)) { for (int j=0; j<mellan.length; j++) { System.out.print(mellan[j]); } displayWin(); } } void displayWin() { gameEnd = true; System.out.println("\nNicely Done!"); return; } // Kör Drive! public static void main(String args[]) { new Drive(); } } Here is how I defined my DriveView thus far: (just trying to make one button to work) import mind.*; import javax.swing.*; import java.util.*; import java.lang.*; import java.awt.*; import java.awt.event.*; public class DriveView extends JFrame { JButton ruta1 = new JButton("Green"); JButton ruta2 = new JButton("Green"); JButton rutatom = new JButton(""); JButton ruta6 = new JButton("Red"); private DriveModel m_model; public DriveView(DriveModel model) { m_model = model; //Layout for View JPanel myPanel = new JPanel(); myPanel.setLayout(new FlowLayout()); myPanel.add(ruta1); myPanel.add(ruta2); myPanel.add(rutatom); myPanel.add(ruta6); this.setContentPane(myPanel); this.pack(); this.setTitle("Drive"); this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); } void addMouseListener(ActionListener mol) { ruta2.addActionListener(mol); } } And DriveController which gives me error at compile import mind.*; import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.lang.*; public class DriveController { private DriveModel m_model; private DriveView m_view; public DriveController(DriveModel model, DriveView view) { m_model = model; m_view = view; view.addMouseListener(new MouseListener()); } class MouseListener implements ActionListener { public void actionPerformed(ActionEvent e) { String mening; mening = e.getActionCommand(); if (mening.equals("Green")) { setForeground(Color.red); } } } }

  Read the article

• l2tp / ipsec debian Openswan U2.6.38 does not connect

  - by locojay

  i am trying to get ipsec/l2tp running on a debian server with an iphone as a client but always get: Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [RFC 3947] method set to=115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: ignoring Vendor ID payload [FRAGMENTATION 80000000] Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [Dead Peer Detection] Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: responding to Main Mode from unknown peer <clientip> Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R1: sent MR1, expecting MI2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R2: sent MR2, expecting MI3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: Main mode peer ID is ID_IPV4_ADDR: '10.2.210.176' Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: switched from "L2TP-PSK-noNAT" to "L2TP-PSK-noNAT" Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: new NAT mapping for #20, was <clientip>:43598, now <clientip>:49826 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: the peer proposed: <public ip>/32:17/1701 -> 10.2.210.176/32:17/0 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: responding to Quick Mode proposal {msgid:311d3282} Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: us: 171.138.2.13<171.138.2.13>:17/1701 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: them: <clientip>[10.2.210.176]:17/61719 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x05e23c9a <0x216077a9 xfrm=AES_256-HMAC_SHA1 NATOA=10.2.210.176 NATD=<clientip>:49826 DPD=enabled} Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA(0x05e23c9a) payload: deleting IPSEC State #21 Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA payload: deleting ISAKMP State #20 Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip>: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:27 vpn pluto[22711]: packet from <clientip>:49826: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: ERROR: asynchronous network error report on eth0 (sport=4500) for message to <clientip> port 49826, complainant <clientip>: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] my setup looks like this verizon fios actiontec -- DMZ-- ddwrt router -- debian xen instance actiontec : 192.168.1.1 ddwrt: 171.138.2.1 debian xen server: 171.138.2.13 forwarded udp 500, 4500, 1701 on ddwrt to debian xen instance. vpn passthrough is enabled /etc/ipsec.conf config setup dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10,%v4:!171.138.2.0/24,%v4:!192.168.1.0/24 protostack=netkey # Add connections here conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Apple iOS doesn't send delete notify so we need dead peer detection # to detect vanishing clients dpddelay=30 dpdtimeout=120 dpdaction=clear # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=171.138.2.13 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "%any" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port. rightprotoport=17/%any #force all to be nat'ed. because of ios conn passthrough-for-non-l2tp type=passthrough left=171.138.2.13 leftnexthop=171.138.2.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/xl2tp/xl2tp.conf [global] ipsec saref = no listen-addr = 171.138.2.13 ;port = 1701 ;debug network = yes ;debug tunnel = yes ;debug network = yes ;debug packet = yes [lns default] ip range = 171.138.2.231-171.138.2.239 local ip = 171.138.2.13 assign ip = yes require chap = no refuse pap = no require authentication = no ;name = OpenswanVPN ppp debug = yes pppoptfile = /etc/ppp/options.xlt2tpd lenght bit = yes /etc/ppp/options.xl2tpd ;require-mschap-v2 pcp-accept-local ipcp-accept-local ipcp-accept-remote ;ms-dns 171.138.2.1 ms-dns 192.168.1.1 ms-dns 8.8.8.8 name l2tpd noccp auth crtscts idle 1800 mtu 1410 mru 1410 lock proxyarp connect-delay 5000 debug dump logfd 2 logfile /var/log/xl2tpd.log ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.0.0-1-amd64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [FAILED] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] The failed can be ignored i guess since cat /proc/sys/net/ipv4/ip_forward returns 1 any help would be much appreciated as i don't have any idea why this is not working

  Read the article

• Firewalls: What is the difference between Policy, NAT and Routes?

  - by Jakobud

  I'm learning fwbuilder and firewalls in general. I don't understand the differences between Policy, NAT and Routes. They all seem like they are just ways to tell the data where to go depending on what it is and where its coming from. What is the real difference? Is a properly configured firewall taking advantage of all three (Policy, NAT and Routes) or are they just three different ways to accomplish the same thing and you only need one of them?

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• L2TP iptables port forward

  - by The_cobra666

  Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

  Read the article

• How to use Salt Stack with minions all behind NAT (not publicly accessible, default salt ports not open)?

  - by MountainX

  Can Salt Stack minions communicate with the salt master from behind NAT/Firewalls, etc., using standard ports that would be open be default in all consumer NAT routers (and without the minions having a public DNS record or static IP)? I'm working my way through my first salt tutorial, and this is where I'm stuck. I am able to configure iptables on the Ubuntu salt-master. But I have no control over the routers/NAT that the minions will sit behind. So far I tried these settings: /etc/salt/master: publish_port: 465 ret_port: 443 /etc/salt/minion: master_port: 465 That did not work. Background: I have a custom developed application presently running on about 40 Kubuntu laptops (& more planned). Every few months I have to update the application. (Often this just amounts to replacing a .jar file, which requires root permissions.) I also have to run Ubuntu updates and a few other minor things. I've been doing it manually, one by one, using Team Viewer to log into each client. I would like to dramatically improve this process. The two options I'm aware of are either: use reverse ssh tunnels and bash scripts. I tested this and it works. But I don't get any of the reporting, etc., I would get with Salt Stack. use Salt Stack (or similar) management tool. But I need a really simple tool. I can't invest any time in a big learning curve. I looked at Puppet and a bunch of related tools. The only one I found that looked simple enough for me (so far) was Salt Stack. But I'm stuck now because my minion can't reach the salt-master, as stated above. I appreciate suggestions.

  Read the article

• Switch to IPv6 and get rid of NAT? Are you kidding?

  - by Ernie

  So our ISP has set up IPv6 recently, and I've been studying what the transition should entail before jumping into the fray. I've noticed three very important issues: Our office NAT router (an old Linksys BEFSR41) does not support IPv6. Nor does any newer router, AFAICT. The book I'm reading about IPv6 tells me that it makes NAT "unnecessary" anyway. If we're supposed to just get rid of this router and plug everything directly to the Internet, I start to panic. There's no way in hell I'll put our billing database (With lots of credit card information!) on the internet for everyone to see. Even if I were to propose setting up Windows' firewall on it to allow only 6 addresses to have any access to it at all, I still break out in a cold sweat. I don't trust Windows, Windows' firewall, or the network at large enough to even be remotely comfortable with that. There's a few old hardware devices (ie, printers) that have absolutely no IPv6 capability at all. And likely a laundry list of security issues that date back to around 1998. And likely no way to actually patch them in any way. And no funding for new printers. I hear that IPv6 and IPSEC are supposed to make all this secure somehow, but without physically separated networks that make these devices invisible to the Internet, I really can't see how. I can likewise really see how any defences I create will be overrun in short order. I've been running servers on the Internet for years now and I'm quite familiar with the sort of things necessary to secure those, but putting something Private on the network like our billing database has always been completely out of the question. What should I be replacing NAT with, if we don't have physically separate networks?

  Read the article

• Is there a way to upgrade versions of portable Tor without having to reinstall all my plugins and Gr

  - by 7777

  Every time I upgrade to a new version of the portable Tor bundle, I also have to reinstall all my plugins and Greasemonkey extensions, and set up all the preferences in Firefox and Pidgin again. Are there certain files I could just move from the old folder to the new folder to make sure I don't have to do this again?

  Read the article

• how to report a malicious site (http://newss.gr) to google, microsoft and mozilla so that they will prompt

  - by Jayapal Chandran

  Hi, I completed a project an year ago. Now a few modification were needed. While i try to test there was an index.html with a malicious script which had an iframe to this site's jar file. and kaspersky anti virus blocked it. So i browsed the ftp to find the file and i deleted it. and also disabled directory listing. May be the ftp details of the site owner would have been hacked. I want to report this site to google, msn and mozilla and other antivirus programs. How to do that. any idea? I hope kaspersky would have updated it in their database but still i want to explicitly inform it about this. here is the popup kaspersky showed.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• forward same port but for two different IPs (cisco)

  - by Colin

  Hi! I have a cisco running IOS 12.0(25) responding to two different IPs addresses: IP_A and IP_B. Behind this router I also have two different servers: server_A and server_B. What I want is to forward port 22 to both servers, so: IP_A, port22 -> server_A, port22 IP_B, port22 -> server_B, port22 ATM this only works for one of them (server_A), this is my config: interface Ethernet0/0 description Internet ip address IP_A 255.255.255.0 ip address IP_B 255.255.255.0 secondary no ip directed-broadcast ip nat outside no ip mroute-cache no cdp enable ip nat pool pool_A IP_A IP_A netmask 255.255.255.0 ip nat pool pool_B IP_B IP_B netmask 255.255.255.0 ip nat inside source list A pool pool_A overload ip nat inside source list B pool pool_B overload ip nat inside source static tcp server_B 22 IP_B 22 extendable ip nat inside source static tcp server_A 22 IP_A 22 extendable access-list A permit server_A access-list B permit server_B

  Read the article

• Is there a way to bridge two outgoing TCP connections in order to bypass firewalls and NAT?

  - by TK Kocheran

  We're all familiar with the problem of port-forwarding and NAT: if you want to expose something to accepting an incoming connection, you need to configure port-forwarding on the router or conjure up some other black magickery to "punch holes" in the firewall using UDP or something. I'm fairly new to the whole "hole-punching" concept so could someone explain how it works? Essentially, I'd like to understand how hole-punching would work and the theory behind it, as well as if two TCP connections could be bridged via a third party. Since there's no issue with outgoing TCP connections since it's handled with NAT, could a third party bridge the connections so that the two parties are still connected but without the bandwidth cost of traffic going through the third party?

  Read the article

• new block adding error

  - by ata ur rehman

  g++: error: ./gr_my_swig.cc: No such file or directory g++: fatal error: no input files compilation terminated. make[3]: *** [_gr_my_swig_la-gr_my_swig.lo] Error 1 make[3]: Leaving directory `/home/ataurrehman/gr-my-basic/swig' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/ataurrehman/gr-my-basic/swig' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/ataurrehman/gr-my-basic' make: *** [all] Error 2

  Read the article

• Help me upgrade my pf.conf for OpenBSD 4.7

  - by polemon

  I'm planning on upgrading my OpenBSD to 4.7 (from 4.6) and as you may or may not know, they changed the syntax for pf.conf. This is the relevant portion from the upgrade guide: pf(4) NAT syntax change As described in more detail in this mailing list post, PF's separate nat/rdr/binat (translation) rules have been replaced with actions on regular match/filter rules. Simple rulesets may be converted like this: nat on $ext_if from 10/8 -> ($ext_if) rdr on $ext_if to ($ext_if) -> 1.2.3.4 becomes match out on $ext_if from 10/8 nat-to ($ext_if) match in on $ext_if to ($ext_if) rdr-to 1.2.3.4 and... binat on $ext_if from $web_serv_int to any -> $web_serv_ext becomes match on $ext_if from $web_serv_int to any binat-to $web_serv_ext nat-anchor and/or rdr-anchor lines, e.g. for relayd(8), ftp-proxy(8) and tftp-proxy(8), are no longer used and should be removed from pf.conf(5), leaving only the anchor lines. Translation rules relating to these and spamd(8) will need to be adjusted as appropriate. N.B.: Previously, translation rules had "stop at first match" behaviour, with binat being evaluated first, followed by nat/rdr depending on direction of the packet. Now the filter rules are subject to the usual "last match" behaviour, so care must be taken with rule ordering when converting. pf(4) route-to/reply-to syntax change The route-to, reply-to, dup-to and fastroute options in pf.conf move to filteropts; pass in on $ext_if route-to (em1 192.168.1.1) from 10.1.1.1 pass in on $ext_if reply-to (em1 192.168.1.1) to 10.1.1.1 becomes pass in on $ext_if from 10.1.1.1 route-to (em1 192.168.1.1) pass in on $ext_if to 10.1.1.1 reply-to (em1 192.168.1.1) Now, this is my current pf.conf: # $OpenBSD: pf.conf,v 1.38 2009/02/23 01:18:36 deraadt Exp $ # # See pf.conf(5) for syntax and examples; this sample ruleset uses # require-order to permit mixing of NAT/RDR and filter rules. # Remember to set net.inet.ip.forwarding=1 and/or net.inet6.ip6.forwarding=1 # in /etc/sysctl.conf if packets are to be forwarded between interfaces. ext_if="pppoe0" int_if="nfe0" int_net="192.168.0.0/24" polemon="192.168.0.10" poletopw="192.168.0.12" segatop="192.168.0.20" table <leechers> persist set loginterface $ext_if set skip on lo match on $ext_if all scrub (no-df max-mss 1440) altq on $ext_if priq bandwidth 950Kb queue {q_pri, q_hi, q_std, q_low} queue q_pri priority 15 queue q_hi priority 10 queue q_std priority 7 priq(default) queue q_low priority 0 nat-anchor "ftp-proxy/*" rdr-anchor "ftp-proxy/*" nat on $ext_if from !($ext_if) -> ($ext_if) rdr pass on $int_if proto tcp to port ftp -> 127.0.0.1 port 8021 rdr pass on $ext_if proto tcp to port 2080 -> $segatop port 80 rdr pass on $ext_if proto tcp to port 2022 -> $segatop port 22 rdr pass on $ext_if proto tcp to port 4000 -> $polemon port 4000 rdr pass on $ext_if proto tcp to port 6600 -> $polemon port 6600 anchor "ftp-proxy/*" block pass on $int_if queue(q_hi, q_pri) pass out on $ext_if queue(q_std, q_pri) pass out on $ext_if proto icmp queue q_pri pass out on $ext_if proto {tcp, udp} to any port ssh queue(q_hi, q_pri) pass out on $ext_if proto {tcp, udp} to any port http queue(q_std, q_pri) #pass out on $ext_if proto {tcp, udp} all queue(q_low, q_hi) pass out on $ext_if proto {tcp, udp} from <leechers> queue(q_low, q_std) pass in on $ext_if proto tcp to ($ext_if) port ident queue(q_hi, q_pri) pass in on $ext_if proto tcp to ($ext_if) port ssh queue(q_hi, q_pri) pass in on $ext_if proto tcp to ($ext_if) port http queue(q_hi, q_pri) pass in on $ext_if inet proto icmp all icmp-type echoreq queue q_pri If someone has experience with porting the 4.6 pf.conf to 4.7, please help me do the correct changes. OK, this is how far I've got: I commented out nat-anchor and rdr-anchor, as describted in the guide: #nat-anchor "ftp-proxy/*" #rdr-anchor "ftp-proxy/*" And this is how I've "converted" the rdr rules: #nat on $ext_if from !($ext_if) -> ($ext_if) match out on $ext_if from !($ext_if) nat-to ($ext_if) #rdr pass on $int_if proto tcp to port ftp -> 127.0.0.1 port 8021 match in on $int_if proto tcp to port ftp rdr-to 127.0.0.1 port 8021 #rdr pass on $ext_if proto tcp to port 2080 -> $segatop port 80 match in on $ext_if proto tcp tp port 2080 rdr-to $segatop port 80 #rdr pass on $ext_if proto tcp to port 2022 -> $segatop port 22 match in on $ext_if proto tcp tp port 2022 rdr-to $segatop port 22 rdr pass on $ext_if proto tcp to port 4000 -> $polemon port 4000 match in on $ext_if proto tcp tp port 4000 rdr-to $polemon port 4000 rdr pass on $ext_if proto tcp to port 6600 -> $polemon port 6600 match in on $ext_if proto tcp tp port 6600 rdr-to $polemon port 6600 Did I miss anything? Is the anchor for ftp-proxy OK as it is now? Do I need to change something in the other pass in on... lines?

  Read the article

• winforms - how do I setup Checkbox's in a Groupbox so that I can reference checkbox states at the gr

  - by Greg

  Hi, I am working on a WinForms app in C#, VS2008. How do I setup Checkbox's in a Groupbox so that I can reference checkbox states at the group level? For example 7 checkboxes for each day of the week. Then I would like to be able get the state when checking via something like: "result = daysOfWeek.Monday;" I'm probably missing the obvious somewhere... thanks

  Read the article

• Font serialization in vb.net

  - by jovany

  Hello all, as the title says , I need to serialize my font. I have tried the following approach unfortunately to no avail. This is what I have and what happens; I have a drawing application and certain variables and properties need to be serialized. (So , Xml.Serialization has been used.) Now this has already been done in a huge portion and I've created some other attributes which needed to be serialized and it works. There is one base class and classes such as drawablestar, drawableeclipse ,etc. all inherit from this class. As does my drawabletextboxclass. The base class is Serializable as can be seen in the sample below. It looks like this... Imports System.Xml.Serialization <Serializable()> _ Public MustInherit Class Drawable ' Drawing characteristics. 'Font characteristics <XmlIgnore()> Public FontFamily As String <XmlIgnore()> Public FontSize As Integer <XmlIgnore()> Public FontType As Integer <XmlIgnore()> Public ForeColor As Color <XmlIgnore()> Public FillColor As Color <XmlAttributeAttribute()> Public LineWidth As Integer = 0 <XmlAttributeAttribute()> Public X1 As Integer <XmlAttributeAttribute()> Public Y1 As Integer <XmlAttributeAttribute()> Public X2 As Integer <XmlAttributeAttribute()> Public Y2 As Integer ' attributes for size textbox <XmlAttributeAttribute()> Public widthLabel As Integer <XmlAttributeAttribute()> Public heightLabel As Integer '<XmlTextAttribute()> Public FontFamily As String '<XmlAttributeAttribute()> Public FontSize As Integer 'this should actually not be here.. <XmlAttributeAttribute()> Public s_InsertLabel As String ' Indicates whether we should draw as selected. <XmlIgnore()> Public IsSelected As Boolean = False ' Constructors. Public Sub New() ForeColor = Color.Black FillColor = Color.White 'FontFamily = "Impact" 'FontSize = 12 End Sub Friend WriteOnly Property _Label() As String Set(ByVal Value As String) s_InsertLabel = Value End Set End Property Public Sub New(ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0) LineWidth = line_width ForeColor = fore_color FillColor = fill_color ' FontFamily = Font_Family ' FontSize = Font_Size End Sub ' Property procedures to serialize and ' deserialize ForeColor and FillColor. <XmlAttributeAttribute("ForeColor")> _ Public Property ForeColorArgb() As Integer Get Return ForeColor.ToArgb() End Get Set(ByVal Value As Integer) ForeColor = Color.FromArgb(Value) End Set End Property <XmlAttributeAttribute("BackColor")> _ Public Property FillColorArgb() As Integer Get Return FillColor.ToArgb() End Get Set(ByVal Value As Integer) FillColor = Color.FromArgb(Value) End Set End Property 'Property procedures to serialize and 'deserialize Font <XmlAttributeAttribute("InsertLabel")> _ Public Property InsertLabel_() As String Get Return s_InsertLabel End Get Set(ByVal value As String) s_InsertLabel = value End Set End Property <XmlAttributeAttribute("FontSize")> _ Public Property FontSizeGet() As Integer Get Return FontSize End Get Set(ByVal value As Integer) FontSize = value End Set End Property <XmlAttributeAttribute("FontFamily")> _ Public Property FontFamilyGet() As String Get Return FontFamily End Get Set(ByVal value As String) FontFamily = value End Set End Property <XmlAttributeAttribute("FontType")> _ Public Property FontType_() As Integer Get Return FontType End Get Set(ByVal value As Integer) FontType = value End Set End Property #Region "Methods to override" Public MustOverride Sub Draw(ByVal gr As Graphics) ' Return the object's bounding rectangle. Public MustOverride Function GetBounds() As Rectangle ...... ........ ..... End Class [/code] My textbox class which looks like this , is the one that needs to save it's font. Imports System.Math Imports System.Xml.Serialization Imports System.Windows.Forms <Serializable()> _ Public Class DrawableTextBox Inherits Drawable Private i_StringLength As Integer Private i_StringWidth As Integer Private drawFont As Font = New Font(FontFamily, 12, FontStyle.Regular) Private brsTextColor As Brush = Brushes.Black Private s_insertLabelTextbox As String = "label" ' Constructors. Public Sub New() End Sub Public Sub New(ByVal objCanvas As PictureBox, ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0, Optional ByVal new_x1 As Integer = 0, Optional ByVal new_y1 As Integer = 0, Optional ByVal new_x2 As Integer = 1, Optional ByVal new_y2 As Integer = 1) MyBase.New(fore_color, fill_color, line_width) Dim objGraphics As Graphics = objCanvas.CreateGraphics() X1 = new_x1 Y1 = new_y1 'Only rectangles ,circles and stars can resize for now b_Movement b_Movement = True Dim frm As New frmTextbox frm.MyFont = drawFont frm.ShowDialog() If frm.DialogResult = DialogResult.OK Then FontFamily = frm.MyFont.FontFamily.Name FontSize = frm.MyFont.Size FontType = frm.MyFont.Style 'drawFont = frm.MyFont drawFont = New Font(FontFamily, FontSize) drawFont = FontAttributes() brsTextColor = New SolidBrush(frm.txtLabel.ForeColor) s_InsertLabel = frm.txtLabel.Text i_StringLength = s_InsertLabel.Length 'gefixtf Dim objSizeF As SizeF = objGraphics.MeasureString(s_InsertLabel, drawFont, New PointF(X2 - X1, Y2 - Y1), New StringFormat(StringFormatFlags.NoClip)) Dim objPoint As Point = objCanvas.PointToClient(New Point(X1 + objSizeF.Width, Y1 + objSizeF.Height)) widthLabel = objSizeF.Width heightLabel = objSizeF.Height X2 = X1 + widthLabel Y2 = Y1 + heightLabel Else Throw New ApplicationException() End If End Sub ' Draw the object on this Graphics surface. Public Overrides Sub Draw(ByVal gr As System.Drawing.Graphics) ' Make a Rectangle representing this rectangle. Dim rectString As Rectangle rectString = New Rectangle(X1, Y1, widthLabel, heightLabel) rectString = GetBounds() ' See if we're selected. If IsSelected Then gr.DrawString(s_InsertLabel, drawFont, brsTextColor, X1, Y1) 'gr.DrawRectangle(Pens.Black, rect) ' Pens.Transparent gr.DrawRectangle(Pens.Black, rectString) ' Draw grab handles. DrawGrabHandle(gr, X1, Y1) DrawGrabHandle(gr, X1, Y2) DrawGrabHandle(gr, X2, Y2) DrawGrabHandle(gr, X2, Y1) Else gr.DrawString(s_InsertLabel, drawFont, brsTextColor, X1, Y1) 'gr.DrawRectangle(Pens.Black, rect) ' Pens.Transparent gr.DrawRectangle(Pens.Black, rectString) End If End Sub 'get fontattributes Public Function FontAttributes() As Font Return New Font(FontFamily, 12, FontStyle.Regular) End Function ' Return the object's bounding rectangle. Public Overrides Function GetBounds() As System.Drawing.Rectangle Return New Rectangle( _ Min(X1, X1), _ Min(Y1, Y1), _ Abs(widthLabel), _ Abs(heightLabel)) End Function ' Return True if this point is on the object. Public Overrides Function IsAt(ByVal x As Integer, ByVal y As Integer) As Boolean Return (x >= Min(X1, X2)) AndAlso _ (x <= Max(X1, X2)) AndAlso _ (y >= Min(Y1, Y2)) AndAlso _ (y <= Max(Y1, Y2)) End Function ' Move the second point. Public Overrides Sub NewPoint(ByVal x As Integer, ByVal y As Integer) X2 = x Y2 = y End Sub ' Return True if the object is empty (e.g. a zero-length line). Public Overrides Function IsEmpty() As Boolean Return (X1 = X2) AndAlso (Y1 = Y2) End Function End Class The coordinates ( X1 ,X2,Y1, Y2 ) are needed to draw a circle , rectangle etc. ( in the other classes ).This all works. If I load my saved file it shows me the correct location and correct size of drawn objects. If I open my xml file I can see all values are correctly saved ( including my FontFamily ). Also the color which can be adjusted is saved and then properly displayed when I load a previously saved drawing. Of course because the coordinates work, if I insert a textField ,the location where it is being displayed is correct. However here comes the problem , my fontSize and fontfamily don't work. As you can see I created them in the base class, However this does not work. Is my approach completely off? What can I do ? Before saving img14.imageshack.us/i/beforeos.jpg/ After loading the Font jumps back to Sans serif and size 12. I could really use some help here.. Edit: I've been using the sample from this website http://www.vb-helper.com/howto_net_drawing_framework.html

  Read the article

• Can I NAT multiple Linux clients through a Windows VPN client to a remote network?

  - by Draco Flangetastic

  Here's the situation: My org has a Check Point firewall. I can only connect to it using Windows, despite making attempts with Openswan. Is there a way I can use the Windows box to VPN into my org and then use the Windows box to NAT other local workstations into the remote network? It seems like I might be able to but I'd like to know that for sure from a networking expert before I run down another rabbit hole. :-) Thanks in advance!

  Read the article

• How do I write an alias for grep -R?

  - by numerodix

  I end up typing grep -Rni pattern . and awful lot. How do I make this into an alias like alias gr='grep -Rni $@ .' Running that gives: $ gr pattern grep: pattern: No such file or directory Even though the alias looks fine: $ type gr gr is aliased to `grep -R $@ .' It seems that the $@ and the . get swapped when it's actually executed.

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >