Search Results

Search found 710 results on 29 pages for 'paragraph'.

Page 16/29 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Proper updating of GeoClipMaps

  - by thr

  I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

  Read the article

• How do client-server cooperation based games like Diablo 3 work?

  - by edgar

  Diablo 3 cooperates with Blizzard servers even during single player games. In fact, Blizzard has had problems with the games "melting their servers." I would like to ask: How do the client and the server communicate? What details does the client leave to the server, and vice versa? What details are redundant - both the client and the server know - and how often do they disagree? The previous paragraph contains the important questions, but I have a few more that I must explain my motivation towards. I am interested in the programming of botting. Ethical botting - I don't plan on actually abusing the automation to run 24/7. I just find it to be a great programming challenge to glean information from a game, and then make decisions from that information. I am stuck in the starting gate. The unofficial questions from this post would be: How can I make a bot (language, tools, libraries)? Can I get information through the communication between client and server, rather than the brute force pixel detection easily used in more static games? There probably is a trust issue, and to that all I can say is that I promise not to abuse the answers. But please feel free to answer any of the questions you feel comfortable with. Thank you!

  Read the article

• Creating a backup - Rsync - Connection refused (111)

  - by pablofiumara

  I am trying to create a backup of my website for free. I just want to have a backup of my website, including not only all files and the configuration but also the databases. I mean, a full backup. If it can be done automatically, it would be better. I feel there are better ways than using the cpanel to achieve that (actually, I believe sometimes web hosters does not have any cpanel). I read the following on how to do it: Automatically mirror the entire contents and configuration of your main server to a secondary backup server on a completely separate network in a different data centre. Use RSync, FXP, cPanel voodoo, or whatever method you wish to automate syncing. That is why I installed Rsync Daemon which is an alternative to SSH for remote backups. I configured it but the test went wrong. The terminal is showing me this: pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share [sudo] password for pablofiumara: rsync: failed to connect to pablofiumara.com (50.87.147.75): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share failed to connect to 50.87.147.7 (50.87.147.7): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] What should I do? Is there a better or easier way to achieve what I wish (I mentioned this in the first paragraph)?

  Read the article

• I'm applying for a position at a startup. To whom should I address my cover letter?

  - by sapphiremirage

  One of the co-founders answered questions about the company when the job was posted, but I feel like I shouldn't assume that he's the one who is in charge of hiring. Since it's relatively new and has a lot of name overlap with other things already on the web, it's hard to find any information about the company online, much less the name of their hiring manager. I'm not even certain that they do have a hiring manager, since I seem to remember that they are just an 8 person team. I've heard that "To whom it may concern" is tacky, and normally I would say something along the lines of "Dear Head of Human Resources", but that clearly doesn't work in this case. Any idea what my salutation should be? Later Edits: Final Version: To Joe Programmer and/or the AwesomeStartup.com hiring team, (+ a few words in first paragraph explaining why I am addressing Joe Programmer) I've already sent the email, so nothing you say here will save me. However, feel free to comment on my decision if you think your words be useful to future generations. Old Version (left here because some people responded to it): To the hiring manager for internships at Awesomestartup.com, Additionally, because so many people made comments about the content of my letter: I did spent several hours writing the cover letter itself and making sure that it was awesome. After spending such a long time working on the important part, I asked this question because I wanted to make sure that it wouldn't get passed over by some human who was having a bad day and decided that my salutation was inappropriate. Not likely when the most likely reader of that email is a programmer type, I know, but I figured that it wouldn't hurt not to be sloppy.

  Read the article

• Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

  - by Ray Nathan

  I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

  Read the article

• How to convert Kindle books into PDF format?

  - by verve

  I'm new to digital books and I use the Kindle app for Windows to read the books I bought but I hate how I can't read the bottom paragraph of a book in the Kindle app in the centre of the monitor; I have to bend my neck down and it gets sore fast. Problem is that I can't move the Kindle book page up or halfway as when I'm reading a PDF document; if you try to move the page in Kindle it skips to the next new page. So, I thought maybe converting my books to PDF will solve the problem. How do I convert Kindle books into the PDF format? Does anyone have another solution? Perhaps a fancier reader that allows me to scroll Kindle book pages? Windows 7 64-bit IE 8

  Read the article

• ssh: which side is running the SOCKS proxy?

  - by Barry Brown

  When I set up a tunnel using dynamic forwarding (ssh -D), which side is running the SOCKS proxy? That is, is the proxy running on the local end (client) or the remote end (server)? Here's the situation: I want to set up several tunnels chained together using -L. Should the -D tunnel be the last one in the chain or the first one? Edit: I found the answer to the second paragraph on Super User (the -D tunnel should be at the remotest end). But I'd still like to know where the proxy code is running.

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010

  - by mbcrump

  After you download and install the January 2011 Windows Phone update, you will notice one annoying thing. The default deployment target for Windows Phone Projects in Visual Studio changes to Windows Phone 7 Device. Before the update, it defaulted to the Emulator. I found this extremely annoying as I’m more than likely going to test with the emulator before putting it on my actual device. Now to make things fair, Microsoft told you they were going to switch the default and even provided a solution, but you will have to check a tiny paragraph in the release notes. The good news is that its very easy to do: Simply navigate out to : %LocalAppData%\Microsoft\Phone Tools\CoreCon See the folder named, “10.0”? Go ahead and delete it. Now, the folder will be completely empty and if you fire up Visual Studio 2010 you will see we are now defaulting to the Emulator again. In my opinion, this should have been left at Emulator. Now, new WP7 developers will get a build error when they first start a WP7 project and will not know why until they read the error list.  Subscribe to my feed CodeProject

  Read the article

• xmodmap modifications aren't enough - anything else I can do?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

• How to sync client and server at the first frame

  - by wheelinlight

  I'm making a game where an authoritative server sends information to all clients about states and positions for objects in a 3d world. The player can control his character by clicking on the screen to set a destination for the character, much like in the Diablo series. I've read most information I can find online about interpolation, reconciliation, and general networking architecture (Valve's for instance). I think I understand everything but one thing seems to be missing in every article I read. Let say we have an interpolation delay of 100ms, server tickrate=50ms, latency=200ms; How do I know when 100ms has past on the client? If the server sends the first update on t=0, can I assume it arrives at t=200, therefore assuming that all packets takes the same amount of time to reach the client? What if the first packet arrives a little quick, for instance at t=150. I would then be starting the client with t=150 and at t=250 it will think it has past 100ms since its connect to the server when it in fact only 50ms has past. Hopefully the above paragraph is understandable. The summarized question would be: How do I know at what tick to start simulating the client? EDIT: This is how I ended up doing it: The client keeps a clock (approximately) in sync with the server. The client then simulates the world at simulationTime = syncedTime - avg(RTT)/2 - interpolationTime The round-trip time can fluctuate so therefore I average it out over time. By only keeping the most recent values when calculating the average I hope to adapt to more permanent changes in latency. It's still to early to draw any conclusion. I'm currently simulating bad network connections, but it's looking good so far. Anyone see any possible problems?

  Read the article

• SQL language drawbacks, The Third Manifesto

  - by David Portabella

  Sometime ago I read about SQL language drawbacks (the basic language specification, not vendor specific), and one of the drawbacks was that the language does not allow to create a set of tuples that don't come from a table. For instance, SELECT firstName, lastName from people; this creates a set of tuples coming from the table people. Now, if I don't have this table people, and I want to return a constant, I'd need something like this to return a set of two tuples (this would not require to have a table): SELECT VALUES('james', 'dean'), ('tom', 'cruisse'); Why I would need that? Because of the same reasons that we can define constants (not only basic types, but objects and arrays also) in any advanced programming language. Workarounds, Yes, I could create a temporal table, fill the data, and SELECT from that table. This is a hack, to overcome the drawbacks of the poor SQL language. I think that I read about this somewhere in "The Third Manifesto", but I don't find the paragraph/example talking about this concrete drawback anymore. Do you know a reference about it?

  Read the article

• Problems after installing a plethora of updates

  - by box

  yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

  Read the article

• Show and Tell: What work are you the most proud of? [closed]

  - by dannywartnaby

  Hey, In the spirit of building community, and because it's always cool to see great work being pushed out and created by people, anyone up for a little show and tell? The rules are really simple, and this is supposed to be a bit of fun, so; post a link to a single piece of work (anything you've produced, designed or developed (or helped developed)) and write a little paragraph or two on what it is, what you like about it, the technology you used and perhaps one thing that you learnt from the project. It could be a website, framework, open source project, game, mobile application... etc. So, allow me to start. I'm personally very proud of a tiny iPhone application I designed and developed. It's only available to UK AppStore users, and I only have a small userbase, but, I like it. The application is called Sushi Total: http://knowledgeisporridge.com/sushitotal.html It's written in Objective-C. It's a very simply application that allows you to total up your bill at Yo Sushi restaurants by tapping coloured plates. If I learnt anything from making this application it's this: I believe software should be simple and uncluttered, and that producing an application with one feature is absolutely fine as long as it works really well. So, who's next?

  Read the article

• How to copy text out of a PDF without losing formatting?

  - by Colen

  When I copy text out of a PDF file and into a text editor, it ends up mangled in a variety of ways. Formatting like bold and italics are lost; soft line breaks within a paragraph of text are converted to hard line breaks; dashes to break a word over two lines are preserved even when they shouldn't be; and single and double quotes are replaced with ? signs. Ideally, I'd like to be able to copy text from a PDF and have formatting converted to HTML codes, "smart quotes" converted to " and ', and line breaks done properly. Is there any way to do this?

  Read the article

• What credentials should I use to access a Windows share?

  - by JMCF125

  H
  i, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

  Read the article

• icons in windows 7 taskbar moving by themselves

  - by valya

  I'm using Windows 7 64 bit. Few days ago I pinned another one application to taskbar and moved it to the left side. But it moved to the right by itself! I tried to return it to the left side but it went to the right again. The same thing happens now with another application (I've uninstalled the application from the first paragraph - not because of a bug, I just don't like it). It's really annoying. I want it on the left side! How to lock it in? I don't know why but it have (2) in the taskbar shortcut's name: 'Mindjet MindManager 8 (2)'

  Read the article

• My sound is not working, so I'm going to reinstall FYI [closed]

  - by fer

  I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

  Read the article

• Automatic highlighting of text in thunderbird

  - by m000

  In days with large email influx, some emails tend to slip out of my attention. Usually these are email where I am not the primary recipient, but I am referenced at some point as having to perform some action. This point may occur after several responses to a thread. E.g.: Hello B, Hello A, Dear all, Could someone give me feedback on document X? Thanks, A. Please find my remarks below: ... Best, B. Thank you for the feedback. I have incorporated it in the document. C, can you make a final proof-reading pass and post it online? Thanks, A. Is there a way in thunderbird to highlight the sentence/paragraph where my name ("C" in this example) or some other configurable keyword occurs, so that I can easily check if I have to take action? Note that I am looking for a way to identify the part of the message that directly concerns me and not which messages concern me. So, filters/tags won't really help.

  Read the article

• icons in windows 7 taskbar moving by themselves

  - by valya

  I'm using Windows 7 64 bit. Few days ago I pinned another one application to taskbar and moved it to the left side. But it moved to the right by itself! I tried to return it to the left side but it went to the right again. The same thing happens now with another application (I've uninstalled the application from the first paragraph - not because of a bug, I just don't like it). It's really annoying. I want it on the left side! How to lock it in? I don't know why but it have (2) in the taskbar shortcut's name: 'Mindjet MindManager 8 (2)'

  Read the article

• What is meant by "no password set" for root account (and otthers)?

  - by MMA

  Several years back, we were more accustomed to changing to the root account using the su command. First, we switched to the root account, and then executed those root commands. Now we are more accustomed to using the sudo command. But we know that the root account is there. We can readily find the home directory of user root. $ ls -ld /root/ drwx------ 18 root root 4096 Oct 22 17:21 /root/ Now my point is, it is stated that "the root password in Ubuntu is left unset". Please see the answers to this question. Most of the answers have something to this effect in the first paragraph. One or two answers further state that "the account is left disabled". Now my (primary) questions are, What is meant by an unset password? Is it blank? Is it null? Or something else more cryptic? How does the account becomes enabled once I set password for it? (sudo password root) In order get a better understanding, I checked the /etc/shadow file. Since I have already set a password for the root account, I can no longer see what is there (encrypted password). So, I created another account and left it disabled. The corresponding entry in the /etc/shadow file is, testpassword:!:16020:0:99999:7::: Now perhaps my above queries need to be changed to, what does an ! in password field mean? Other encrypted passwords are those very long cryptic strings. How come this encrypted form is only one character long? And does an account become disabled if I put an ! in the (encrypted) password field?

  Read the article

• When Typing on my mac the cursor moves/deletes/replaces text.

  - by David

  Help! I don't know what is happening, with my computer (Macbook Black OSX 1ha0.6.6) but recently whenever I am typing my cursor suddenly moves in the middle of my frase or paragraph, deleting text, replacing words or just closing applications. I don't know what might be the cause but it's driving me crazy. I have disabled typinator (which had worked fine for a couple of months) and looked through the keybindings in SystemPreferencesKeyboardKeyboard Shortcuts. But for have not been able to find any answers. It happens in all apps that require typing. Textmate, Chrome, FIrefox, Texedit, Mail. Does anybody know if there is a way I can review all keyboard shortcuts, to see if the issue lies there or any suggestions? Thanking you dearly Dave

  Read the article

• Why should I use $[ EXPR ] instead of $(( EXPR ))?

  - by qdii

  On the paragraph explaining arithmetic expansion, Bash's user guide uncovers 2 different ways of evaluating an expression, the first one uses $((?EXPRESSION?)) and the second one uses $[?EXPRESSION?]. The two ways seem pretty similar as the only difference I have found is: $[?EXPRESSION?] will only calculate the result of EXPRESSION, and do no tests: Yet, I am intrigued because the same document recommends using $[?EXPRESSION?] rather than $((?EXPRESSION?)). Wherever possible, Bash users should try to use the syntax with square brackets: Why would you want that if less tests are being done?

  Read the article

• Twisted pair cable twists and unwanted signals issue

  - by ziaharipur

  I am confused about one point I have read the following paragraph from the networking book. “the twists in the twisted pair cable are used to avoid the unwanted signals. For example one twist, one wire is closer to the noise source and the other is farther; in the next twist the reverse is true. Twisting makes its probable that both wires are equally affected by the unwanted signal. This means that the receiver which calculate the difference between the two receives no unwanted signal.” Now ok I understood the purpose of twists but I am confused about how receiver will calculate the difference when it will receive the signal?. How unwanted signal will be eliminated ? Another thing that I want to make clear is , I am beginner please provide such an answer that can be understood.

  Read the article

• Oracle 11g ??? – HM(Hang Manager)??

  - by Allen Gao

  Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:??; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;} ??????????oracle 11g ???—hang ???(Hang Manager) ???????????,HM ??RAC ??????? ?????????????,??????????/?? hang???????hang???,????,??????????? ??(cycle)?????hang, ???????,???????? ?????(blocker) ?????????????????????,???????,?????blocker ????????(immediate blocker)??????(root blocker)??root blocker ?????????????? 2.1 ???????????,??????,????????????? 2.2 ????????????????????(??:??I/O),??????,????????????????,?????????,????????????? ??????????, oracle??????????? ???????????11g RAC???? hang????hang ?????????? 1.?????????????hang analyze dump ??? 2.????hang analyze dump??(?????) 3. ??????dump??,??????????hang? 4. ??????????hang??? ???,??????????????? ??1: ORACLE ??????????,????? hang analysis cache,???????hang analyze dump i?????????????????????????? ??2:oracle ?????hang analyze ??,??,HM?????RAC??????,hang analyze??????????????,??????dump ????????DIA0(?????11g????)???????3????????hang analyze dump, ?10 ???????hang analyze dump? ??3:??,????????hang analyze dump ??,??,??????????????DIA0??,???????hang ?????,??RAC???,??hang????????????????,??????????DIA0 ????master,???????????????????11g??,?????????DIA0?????HM?master?????,?????????????,?(master)DIA0 ???????????????????? ??hang???,HM????????????,?HM?????hang analyze dump(?30???????,????????)?,??????????????????(???????open chain),????????????????(??,???????????),??,???????,?????????hang??????????????,?????????????????,???????????(open chain)??????,???????????????????hang.??,????(dead lock)????,????????,???????????????????????????? Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE MicrosoftInternetExplorer4 DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:??; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;} ??4: ???hang??????,??hang???????????????HM ??,????hang?????????????,??HM???????hang. 1. ??????????????????hang??,??:asm?????? 2. ????????????,??:TX?? 3. ???? 4. ???????????:???????“log file switch ”(?????????????????filesystem??????????HM????????,hang??????????)? ??,hang?HM???????,??HM?????????? ???HM???????,??????????????????,?????????oracle ???????,?????????crash???,HM???hang???,??????????????????"_hang_resolution_scope" ???,??????????off(???,????HM?????hang),process(??HM??????,??????????????),instance(??HM??????,??????????????????????????)? ??,????HM ????????trace ?????????? ??: _hang_resolution=TRUE ?? FALSE?????????HM????hang? _hang_resolution_scope=OFF,PORCESS?? INSTANCE?????????HM???????? _hang_detection= <number>? HM??hang?????,????30(?)? ??????????,???????????,??“Oracle 11g ??? – HM(Hang Manager)??"?

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >