Search Results

Search found 1056 results on 43 pages for 'richard w'.

Page 16/43 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• Coloring The Z Shell[closed]

  - by Richard

  Because I have to stare at my command prompt all the time on my computer, it should look at least half-decent, so I am trying to get it colored. The expected outcome is as seen on this site. I have the colors I want set in my .Xdefaults file, but they of course do not color my prompt. My .zshrc is Phil's Prompt. My .Xdefaults is: *background: #121212 !black xterm*color0: #353535 xterm*color8: #666666 !red xterm*color1: #AE4747 xterm*color9: #EE6363 !green xterm*color2: #556B2F xterm*color10: #9ACD32 !brown/yellow xterm*color3: #DAA520 xterm*color11: #FFC125 !blue xterm*color4: #6F99B4 xterm*color12: #7C96B0 !magenta xterm*color5: #8B7B8B xterm*color13: #D8BFD8 !cyan xterm*color6: #A7A15E xterm*color14: #F0E68C !white xterm*color7: #DDDDDD xterm*color15: #FFFFFF *foreground: #DDDDDD Help will be appreciated.

  Read the article

• How can I manually install pecl_http on Ubuntu 9.10?

  - by Richard

  This is essentially a repost of http://stackoverflow.com/questions/4159369/ubuntu-9-04-pecl-extension-downloads-but-does-not-install. Hoping maybe someone can help me here. I've done this: sudo apt-get install php-pear sudo apt-get install php5-dev sudo apt-get install libcurl3-openssl-dev which installs fine. However, the next step: sudo pecl install pecl_http Doesn't install the extension, but merely downloads it. There are no error messages. So I have unpacked it and built it myself per http://php.net/manual/en/install.pecl.phpize.php Essentially: cd pecl_http phpize ./configure make make install I also make test'd to check all ok - and it failed one test: HttpRequest, which is kind of fundamental to this package. And indeed this doesn't work: $r = new HttpRequest('http://www.google.com'); $r->send; echo $r->getResponseCode(); No request is sent, the response code is zero, but no errors either. How can I get this damn thing installed? Is this a bug? Am I doing something wrong? Any alternatives, workarounds? Help appreciated. Thanks

  Read the article

• PPTPD with PAM authentication?

  - by Richard

  I need a VPN solution for my company. One requirement is to be able to use the built-in windows VPN client. We are running a Debian Etch server. I've managed to set up PPTPD but the authentication is based on the chap-secrets file. We already have all the user accounts set up on the server, so it'd be nice to use PAM authentication to get user/pass directly from the unix login. Is this possible to achieve and how? If not, is there any other VPN solution that can do this? Don't tell me OpenVPN, it needs additional software to be installed on the Windows machines. :)

  Read the article

• How to diagnose repeated "Starting up database '<dbname>'"

  - by Richard Slater

  I have a SQL 2008 server which is predominantly used as a development server, in the last two weeks it has been having occasional "fits", I have isolated the cause of these fits as CHECKDB being run almost continuiously, the following log information is logged to the Windows Event Log (Source: MSSQLSERVER, Category: Server): Event: 1073758961, Message: Starting up database 'DBName1'. Event: 1073758961, Message: Starting up database 'DBName2'. Event: 1073759397, Message: CHECKDB for database 'DBName1' finished without errors on 2010-07-19 20:29:26.993 (local time). This is an informational message only; no user action is required. Event: 1073759397, Message: CHECKDB for database 'DBName1' finished without errors on 2010-07-19 20:29:26.993 (local time). This is an informational message only; no user action is required. This is repeated every 1-2 seconds untill SQL Server is restarted or the offending databases are detatched. I initially thought that it was a problem with the databases so I took a backup and restored them to a SQL Express instance, all of the data is in tact, and CHECKDB runs without problem. The two databases that were causing a problem last week were not being used; so I took full backups of them and detached the databases, this resolved the problem. However at 0100 GMT this morning to other totally unrelated databases started showing the same problems. There is nothing in the event log to suggest that something happened to the server such as a restart, there are no messages about processes crashing or issues being detected with the storage controller. Speaking to the owner of the company this computer has suffered from "gremlins" in the past, however advice was taken and the motherboard was replaced and the computer rebuilt, memory and processor are the same. Stats: O/S: Windows 2008 Standard Build 6002 CPU: 2x Pentium Dual-Core E5200 @ 2.5GHz RAM: 2GB SQL: 2008 Standard 10.0.2531 Edit: someone posted then deleted a comment about AutoClose, it was turned on on the databases affected. It seems that best practice is to disable it so I have done that with the folllowing. EXECUTE sp_MSforeachdb 'IF (''?'' NOT IN (''master'', ''tempdb'', ''msdb'', ''model'')) EXECUTE (''ALTER DATABASE [?] SET AUTO_CLOSE OFF WITH NO_WAIT'')' I won't know if the problem recurs for some time so I am still open to further answers.

  Read the article

• Using Juniper EX3300 as a router

  - by Richard Whitman

  So I have a Juniper EX3300 Switch. One of its uplink ports (ge-0/1/0) is connected to my ISP's router. ISP router's port address is xx.xx.xx.109. My switch's IP address is xx.xx.xx.110. From the switch, I can ping to xx.xx.xx.109 and any other IP in the world. I mean its connected to the Internet. I connected the port eth0 of a computer (running Ubuntu) to the port ge-0/0/0 of the switch (which in the same VLAN as ge-0/1/0). I configured the port eth0 as follows: iface eth0 inet static address yy.yy.yy.208 netmask 255.255.255.240 gateway xx.xx.xx.110 yy.yy.yy.208 is assigned to me by the ISP. So, now I can ping to the switch (xx.xx.xx.110) from this computer. But I can not ping to either xx.xx.xx.109 (ISP router) or any other IP. I want this computer to be connected to the Internet. What am I doing wrong? Here are some of the configurations on my switch: interfaces { ge-0/0/0 { unit 0 { family ethernet-switching; } } . . . ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family ethernet-switching { port-mode access; } } } . . . vlan { unit 0 { family inet { address 10.0.1.1/24; } } unit 1 { family inet { address xx.xx.xx.110/30; } } } } . . . routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.109; retain; } } } vlans { Cogent { vlan-id 3; interface { ge-0/1/0.0; ge-0/0/0.0; ge-0/0/1.0; ge-0/0/2.0; ge-0/0/3.0; } l3-interface vlan.1; } TFLan { vlan-id 2; interface { ge-0/0/5.0; ge-0/0/6.0; ge-0/0/7.0; ge-0/0/8.0; ge-0/0/9.0; ge-0/0/10.0; ge-0/0/11.0; ge-0/0/12.0; ge-0/0/13.0; ge-0/0/14.0; ge-0/0/15.0; ge-0/0/16.0; ge-0/0/17.0; ge-0/0/18.0; ge-0/0/19.0; ge-0/0/20.0; ge-0/0/21.0; ge-0/0/22.0; ge-0/0/23.0; ge-0/0/4.0; } l3-interface vlan.0; } }

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• Linux Port 80 to redirect to a Windows box

  - by Richard Staehler

  I have 2 servers here at work. One is a Windows 2008 Server R2 (for safety's sake, lets use 192.168.1.100) and the other is a Fedora 14 (192.168.1.101). Currently when you hit our subdomain, x.test.com, our routers tell it to go to our Fedora box, and since Apache is installed and listening to port 80, it displays the Fedora Apache Test Page. It's obvious that I don't use port 80 for this machine, however I do use NAGIOS on it and its always nice to be able to access that from anywhere in the world. So when I want to access it, I just type x.test.com/nagios. Now here comes the dilemma.... On the Windows R2 box, we recently have installed a program that requires us to setup a web server using IIS7. Because of this application, I'm going to be creating a new subdomain called y.test.com, but since we only have 1 WAN/router, it will still get pointed to our Fedora box. That being said, it wants to use port 80 as well (or whatever port I damn well wish to assign it). So my question is: since our router is pointing to the Fedora 14 box (.101), and I want to make sure I can access NAGIOS from anywhere in the world, how do I tell Apache (httpd) to redirect port 80 to the other server (.100)? If not possible, what are my other options? I have rinetd installed on Fedora and have even tried the option 192.168.1.101 80 192.168.1.100 80 and it didn't seem to work "because port 80 was already bound" Thoughts? and Thanks!

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• Hide notification area GPO not applying

  - by Richard

  I have created a GPO to hide the notification area on Windows XP SP3. The GPO must apply to all students but only in certain rooms so I've also enabled loopback processing on the GPO and linked to the OUs the computers are in. I've then added a group to the security filter that contains all student accounts. This is not applying. It doesn't even show up in gpresult. I have also tried linking it in the Students OU which contains all student accounts and applying a security filter with a group of the computers I want it to apply to. This didn't work either. It's possible I'm missing something straightforward. Would a WMI filter do the job, and if so how would I go about writing one so that it'll only apply to computers whose name begins with XX-RT for example.

  Read the article

• Exchange Out of Office Reply reset

  - by Richard West

  I have a question. We have an employee that is going to be on maternity leave for the next 8 weeks. I think that Outlook/Exchange is designed to send one out of office message to each person that sends an email to my user for the duration of the out of office reply. Meaning that if someone sends an email to my user each week they are only going to receive one out of office message - the first time they send her an e-mail. My concern is that over time people might forget that she is out of the office. Since they are not receiving any type of reply when they send an email this would seem possible. Does anyone know if Exchange ever resets the out of message notification after a certain amount of time? Like a week or so? I'm not looking for every message to get an out of office message, but I think more than one over the course of 8 weeks would be appropriate. I know that I can turn off and turn back on the out of office assistant to "reset" the replies, but I'm curious if Exchange performs a reset after a certain period of time automatically.

  Read the article

• WDS DHCP same server on Windows Server 2008

  - by Richard

  I have been struggling with a problem on my Windows Server 2008 for the past 4 - 5 hours and cannot figure out whats wrong. I have tried pretty much everything that I found on google and all the links are purple. Hopefully you guys can help me. I am running a Windows Server 2008 Standard edition with the latest updates as of today. Furthermore I am running a Windows Server 2003. Both are virtual machines on my ESXi 5 server. My network is: 192.168.10.0/24 W2k8: 192.168.10.251 is the PDC running ADS, DHCP and WDS W2k3: 192.168.10.253 AND 192.168.1.175 running Routing and Remote Access and ISA 2006 Enterprise In my internal network (192.168.10.0/24) I have my client machine (192.168.10.10) that runs a VMWare Workstation. I am trying to deploy Windows 7 Home Premium to a virtual machine on my VMWorkstation via PXE. I have set the Workstation's VM network adapter to "bridged" so that it uses the physical network adapter and is connected to my internal network. The DHCP pool is configured to give IP addresses from 192.168.10.10-192.168.10.15 (works for normal clients and is not used up) When I start my VM with the PXE I get the error: PXE-E52:proxyDHCP offers were received. No DHCP offers were received Apperently this means "that means that WDS responded but the DHCP server did not." People suggested to direct the traffic to both WDS and DHCP on the router, since everything is on the same subnet there is no need for that as the broadcast is seen by everyone (WDS and DHCP) No reservation for the virtual mac addrs is made on the DHCP. Furthermore it was suggested to configure the DHCP options: Option 60= PXEClient Option 66= WDS server name or IP address Option 67= Boot file name However, this is not recommended by Microsoft, I tried it and it did not solve my problem. The configuration on the WDS (My System is German therefore the actual naming might be different): PXE response tab: PXE responses is set to "ALL (known and unknown)" DHCP Tab: Do not listen to port 67 is NOT ticked - if I tick this I do not get any responses and the PXE errors gets PXE-E51 that neither DHCP or proxyDHCP were received DHCP-Option 60 for "PXEClient" is ticked The confusing part here is that it is advised in the tab to tick the first option since it is on the same server. Network Configuration Tab: Use the following IP-Address range for Multicast-IP-Address: 224.0.1.0 - 224.0.10.0 Thats not the default one, however it is in the allowed range. The UDP port range is the default since it is not advised to change them. I tried to change the "networkprofile" from 100mbits/1gbits and custom. I am running a 1gbit network with CAT6 cables and 1gbit netgear switch 5 ports. Everything is configured to use 1gbit. The WDS is authorised for the DHCP server. My ISA 2006 configuration: For the internal networking i have configured the following policy array: Allow protocols on internal network including the w2k3 host: 67,68,53,ICMP, 4011 UDP receive, 64001-6500 UDP send receive, 69 UDP send Routing and Remote Access I tried the DHCP relay agent configuration that was suggested as well, but that did not work I would highly appreciate anykind of help because I am pretty much done here with my nerves. Thank you very much in advance.

  Read the article

• links for 2011-02-28

  - by Bob Rhubart

  Apache Tuscany : SCA Java 2.x Releases (tags: ping.fm) Richard Veryard on Architecture: Modernism and Enterprise Architecture "Underlying conventional enterprise architecture theory and practice are some implicit assumptions that could be loosely characterized as modernist. Several people are offering more or less radical departures from conventional enterprise architecture..." - Richard Veryard (tags: ping.fm entarch) Java / Oracle SOA blog: Building an asynchronous web service with OSB "A few weeks ago I made a blogpost over how you can build an asynchronous web service with JAX-WS. In this blogpost I will do the same in the Oracle Service Bus." - Oracle ACE Edwin Biemond (tags: oracle otn oracleace servicebus esb osb webservices soa) Enterprise Software Development with Java: GlassFish 3.1 arrived! Yes sir, we do cluster now! "GlassFish 3.1 is finally there. As promised by Oracle back in March last year! And it is an exciting release. It brings back all the clustering and high availability support we were missing since 2.x into the Java EE 6 world." - Oracle ACE Director Markus Eisele (tags: oracle otn oracleace glassfish)

  Read the article

• Xcopy /exclude does not exclude some of the specified criteria

  - by Richard Z.

  Good afternoon. I want xcopy to copy all files meeting a certain criteria located in the C drive to a specific folder, except ones located in the directories specified in excl.txt. The exclusions only work partially - the files located in %systemroot%, %programfiles% and in each profile's appdata are still copied, even though those directories are listed in excl.txt. How do I make xcopy skip those directories, preferentially still using environment vars to specify the paths? My current syntax is: xcopy /s /c /d /h /i /r /y /g /f /EXCLUDE:excl.txt %systemdrive%\*.doc f:\test\ excl.txt currently contains the following: \%temp%\ \%userprofile%\appdata \%programfiles%\ \%programfiles(x86)%\ \%systemroot%\ \%programdata%\ appdata windows %programfiles% Thank you very much.

  Read the article

• Podcast Show Notes: Red Room Interview &ndash; Part 3: Ninja BPM

  - by Bob Rhubart

  The third and final segment of my conversation with Red Room bloggers Sean Boiling, Richard Ward, and Mervin Chaing is now available. Listen to Part 1 Listen to Part 2 Listen to Part 3 As you’ll hear, this segment gets its title from another example of Mervin’s tactic for tweaking terminology to make it easier to sell stakeholders on certain SOA concepts. These are some very bright, very knowledgeable guys, so I encourage you to connect with them via the links below to pick their brains on any SOA or related issues that might have you reaching for the aspirin bottle. Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog Once again, you’ll find the complete list of Red Room SOA Best Practice Posts in here. Up Next Next week’s program features another panel discussion recorded during a virtual min meet-up. The panel includes Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) along with The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. Stay tuned: RSS   Technorati Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm del.icio.us Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm

  Read the article

• Network - Routers conflicting in my subnet

  - by Richard

  I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

  Read the article

• Updating PHP mySQL drivers when updating mySQL

  - by Richard

  I have apache, php, and mysql all installed from source. When I update mySQL to the latest version (5.1.46), do I need to update anything on the php side for it to be able to work with the new version? Many Thanks

  Read the article

• Problem Adding Windows 7 64-bit print drivers to 32-bit Windows 2003 Print Server

  - by Richard West

  I have installed the final RTM version of Windows 7 professional 64 bit on a test system before we begin the roll out in our company. I'm having problems connecting to several HP printers that we have on the network. These printers are being shared from a Windows 2003 server host. I have downloaded the lastest HP Universal Printer dirver, however I'm unable to add the 64 bit driver onto the 2003 server system (it's 32 bit). Does anyone have any advice on how I can get connected to these printers from the Windows 7 system?

  Read the article

• Can I send some text to the STDIN of an active process running in a screen session?

  - by Richard Gaywood

  I have a long-running server process inside a screen session on my Linux server. It's a bit unstable (and sadly not my software so I can't fix that!), so I want to script a nightly restart of the process to help stability. The only way to make it do a graceful shutdown is to go to the screen process, switch to the window it's running in, and enter the string "stop" on its control console. Are there any smart redirection contortions I can do to make a cronjob send that stop command at a fixed time every day?

  Read the article

• How do I detect if uTorrent is downloading?

  - by Richard

  I need to write a script that determines whether or not uTorrent is currently downloading something. I'd rather it just be downloading, but if I cannot differentiate between downloading and uploading then it would be better than nothing. One possible way would be check the whether any files ending in .!ut are locked - but I'm hoping for something a little more elegant. My weapon of choice is VBScript but I'm happy to use the command line if needs be.

  Read the article

• firefox addon f@stestfox API sending/collecting data?

  - by Richard

  System: ubuntu64/firefox24.0 object: addon "f@stestfox". Its a nice in-browser search tool and more. Problematic: is the way the program handles the search queries. when I use a search shortcut, burpsuite says: request to msgs.smarterfox.com: 80 GET /log_msg?name=popup_bubble_searched&search_engine_title=Search%20Startpage&source=FastestFox&redirect_to=https%3A%2F%2Fstartpage.com%2Fdo%2Fsearch%3Fcmd%3Dprocess_search%26cat%3Dweb%26query%3Dnginx%26language%3Denglish%26no_sugg%3D1%26ff%3D%26abp%3D-1&rand=856827465 HTTP/1.1 Host: msgs.smarterfox.com User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Connection: keep-alive once I saw a unique identifier (installation time?) was send with the request to the server. Am I right, that the addon sends the website I am looking at to the server? Sometimes I only mark text(ip adress or link) and the addon send this data? seriosly? I did: search for the url in the code, but I dont speak java. And I am not sure, if the data from the request can actually be used for tracking :) question: I want the awesome features of the addon, without connecting to their server: marked text should be send only to the searchmachines. what should I do next? thank you.

  Read the article

• Windows 7 home backup solution, with offsite provision

  - by Richard E

  I am looking for a home backup solution for my single Windows 7 (Home Premium) PC. I have about 500GB of data to backup. I would like to spend less than GBP 300 on the solution. I don't see the need to backup the whole PC, rather specific folder branches (iTunes, photos, documents, Outlook files, user folders such as desktop, favorites etc). I would like a solution that enables me to maintain backups in two separate physical locations (e.g. home and work). To facilitate this I am imagining a storage unit with slots for two removable drives, along with three separate drives. At any one time two of the drives will be being backed up to in the storage unit. The third will be located at my work. Periodically I will take one of the drives into work and leave it there, then bring the drive that was there back home, and plug it into the storage unit. It will then be backed up along with the other drive that was left in the storage unit. This approach should cover scenarios such as virus attack and fire or theft from one location. Thoughts and comments on the sanity of this approach please...

  Read the article

• Windows 7 home backup solution, with offsite provision

  - by Richard E

  I am looking for a home backup solution for my single Windows 7 (Home Premium) PC. I have about 500GB of data to backup. I would like to spend less than GBP 300 on the solution. I don't see the need to backup the whole PC, rather specific folder branches (iTunes, photos, documents, Outlook files, user folders such as desktop, favorites etc). I would like a solution that enables me to maintain backups in two separate physical locations (e.g. home and work). To facilitate this I am imagining a storage unit with slots for two removable drives, along with three separate drives. At any one time two of the drives will be being backed up to in the storage unit. The third will be located at my work. Periodically I will take one of the drives into work and leave it there, then bring the drive that was there back home, and plug it into the storage unit. It will then be backed up along with the other drive that was left in the storage unit. This approach should cover scenarios such as virus attack and fire or theft from one location. Thoughts and comments on the sanity of this approach please...

  Read the article

• Does OneNote have palm rejection or a hand rest spot?

  - by Richard DesLonde

  I just bought an Acer Iconia W500. I really wanted to use it for taking notes and having all the amenities of a full blown computer without the size. Using OneNote to take notes, I notice I can't rest my hand on the screen. I have read some about this and it seems the very best solution is to get a tablet with active digitizer technology, but there aren't too many with this and it is expensive. So barring that, is there any way I can rest my hand on the tablet screen while taking notes in OneNote? Or am I relegated to hovering my hand over the screen while I write notes? Does OneNote have a palm rest area or some sort of palm rejection?

  Read the article

• Java issues with Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit

  - by Richard

  In trying to install Apache 2.0 Agent 2.202 for RHEL5 Linux 64bit, the dialogue appears as follows. $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Launching installer... Attach to native process failed $ ./setup Error : java is not present in path. Please enter JAVAHOME path to pick up java:/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/lib ./setup: line 80: [: 107:: integer expression expected ./setup: line 83: [: 107:: integer expression expected Error : Incorrect java version (1.2.2 or above is needed). Please enter JAVAHOME path to pick up java: On the server we have the following JREs and I've tried both. $ sudo rpm -qa | egrep "(openjdk|icedtea)" java-1.6.0-openjdk-1.6.0.0-1.27.1.10.8.el5_8 $ find 2>/dev/null | grep -i '/jre/' ./usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre/bin/ ... ./usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/ Any suggestions? I know I'm overlooking something. In previous searches I've only found one other posting that comes close but it has no responses (http://forum.parallels.com/showthread.php?t=76556).

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >