Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 16/802 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• Virtual CloneDrive - Free Utility

  - by TATWORTH

  At http://www.slysoft.com/en/virtual-clonedrive.html, SlySoft have made available, Virtual Clone Drive."Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Image files generated with CloneDVD or CloneCD can be mounted onto a virtual drive from your hard-disk or from a network drive and used in the same manner as inserting them into a normal CD/DVD drive. Probably the best virtual drive software, Virtual CloneDrive allows you to enjoy the freedom of a virtual drive and is completely free."

  Read the article

• What USB key would you recommend using for running a Windows 7 VM off of?

  - by Darryl Hein

  Because I can't find a good PHP editor for OSX, I develop in Windows with PhpEd. At the moment, my development time is split between a desktop and a laptop. To partially solve the problem of having 2 different environments, I have installed a virtual machine (through Virtual Box) and put the hard drive file on an external hard drive. At the moment, I've been connecting it through Firewire 800. I have 2 problems with this setup: (1) The hard drive is fairly large so to carry the laptop and hard drive I pretty much require a backpack. (2) The hard drive requires quite a bit of power and therefore reduces the battery life (by about 40%). My thought is to move the VM hard drive onto a USB key. I realize it will be slower, but as I'm just using it for PHP development, there isn't a lot of disk activity in the VM. The only really intense time is boot up, otherwise, it just about sits idle. Do anyone have any suggestions on a USB key to use for the VM? It would need to a minimum of 32GB.

  Read the article

• Looking for a USB Thumbdrive / Flash drive encryption solution (not TrueCrypt)

  - by Max888

  I am looking for a USB Thumbdrive / Flash drive encryption solution. I have searched the net but I have never come accross a solution which meets the following: Must handle at least 4GB volume If possible, fully portable (no install required required) Does not require admin rights in order to access/write encrypted files on the flash drive Does not corrupt data should the flash drive is removed from a USB port and the data is in a 'unencrypted' status Data is automatically encrypted if the flash drive is removed from a USB port and the data is in a 'unencrypted' status Portable apps must be able to run from the 'unencrypted' volume (in non-admin mode) PLEASE do not mention TrueCrypt as I am not considering (especially for wish list #3) Many thanks! Update 5th October 2009: Still unresolved.

  Read the article

• Virtual PC: Cannot restore machine from hibernate

  - by Paul Lammertsma

  I have two virtual machines set up from Virtual PC on Windows 7 Professional: Windows XP Mode and Xubuntu. Last time I used them (last month or so), I had closed them by hibernating. Evidently, I have meanwhile downloaded a Windows Update affecting VPC and now receive the following error in restoring either of them from hibernation: 'Xubuntu' could not be restored because of either host processor type mismatch or lack of hardware-assisted virtualization support in the system. I've been through the virtual machine's settings, and there's nowhere an option to simply reboot it. (Virtualization is not the problem, as I can create a new virtual machine without any problems.) Any ideas?

  Read the article

• Can't boot flash drive on GIGABYTE motherboard

  - by Deltik

  Situation When I try to boot from my flash drive, my GIGABYTE 970A-UD3 motherboard returns this: Loading Operating System ... Boot error All other motherboards I've tried support booting from that flash drive (and a backup flash drive). The operating systems I tried on both flash drives were created with usb-creator-gtk (Ubuntu USB Startup Disk Creator). I know that the motherboard understands that there is an operating system on the flash drives because when I erase them, it complains in an ALL CAPS RAGE that there isn't an operating system, which is correct. How can I boot a flash drive that's bootable from other motherboards on this motherboard? Qualification This question is not a duplicate of this one because directly writing to the flash drive as an ISO 9660 (dd if=operating_system.iso of=/dev/sdb) still does not have the motherboard recognize the operating system. This question should be a duplicate of this one because I provide more information not provided by that poster. This forum thread has broken links and does not have a solution to my problem. Nobody knows what's going on in this forum thread.

  Read the article

• Get hard drive to spin up upon mouse movement

  - by John

  My storage drive which does not contain the OS stops spinning after a few minutes. This is annoying and totally defeats the purpose of having a fast access drive. The drive will NOT spin up when I use the mouse! It only spins up when accessed. However, I don't want it to spin all the time. I would like it to spin up anytime there is mouse activity so it is at the ready when I am using the computer, but go to sleep during inactivity. Can anyone think of a trick to get a secondary drive to spin up on a mouse movement?

  Read the article

• cd drive is not list under bootable divice

  - by jamie

  how do i make my CD drive a bootable device

  Read the article

• Backing up VM data to host drive on Windows 7

  - by malcolms

  Hi, I have created a VM for Virtual PC in windows 7. I am writing a batch file to backup data in the VM to a host USB drive. I have shared the host drives. I have a USB drive that I want to backup to. But how do refer to the USB drive in the batch file. I cannot seem to map a drive to it, It is called "H on Malcolm-Desktop" in windows explorer. This is what I have tried. XCOPY C:\Inetpub\wwwroot "\\H on Malcolm-Desktop\HALII_VHD_Backup\DataBackup\Inetpub\wwwroot" /S /E /Y /D How do I write this command? Malcolm

  Read the article

• Secondary drive corrupted/not reading

  - by Sebastian

  When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• Multiple LiveCD iso's on a single USB drive

  - by Keck

  I am looking to create a USB flash drive that I can put multiple LiveCD iso's on and select which boots from startup. The ideal candidate supports linux and windows based iso's, and is relatively simple. It also must have some reasonable process for adding and removing iso from the drive/list. Things that I'm not looking for this specific question: UBCD or other swiss-army knife livecd's. The point is to boot any one of multiple CD's, not to boot a (certainly useful) utility CD. Installing a single LiveCD to a USB drive. I'd like to have multiple iso images, selectable at startup. I don't have a specific purpose in mind, possibilties include a single drive with a knoppix variant, ubuntu desktop, UBCD for dos, UBCD4Win, the Offline NT Password Cracker, etc. Flexible and easy to use are the name of the game!

  Read the article

• how to make a flash drive read-only on other computers

  - by Nrew

  How do I make a flash drive or a flash drive partition so that it would only be read-only and will not be affected by a virus. Maybe making the flash drive be treated as a CD on other computer so that its not possible to write any kind of data into it.

  Read the article

• Best way to backup Xbox 360 USB Drive

  - by TekiusFanatikus

  What is the best way to backup/restore my USB drive that I use for my Xbox? I want to make sure that if the USB drive goes, that I can retrieve my saved games and such onto another USB drive. I was able to show the content of the drive, however, I wasn't sure if I could simply copy the content onto a Truecrypt volume and be able to restore it from there at a later date. The file system is not FAT or NTFS, wasn't sure about the impacts of copying from two different file systems... I currently have a DataTraveler G3 16GB. After a bit of googling, I was able to find this article, mentions an app called USBXtafGUI

  Read the article

• Cannot share files on USB drive between Windows 98 and Windows 2000

  - by Ken Pespisa

  I've run into a strange situation where I can't share files between Windows 98 and Windows 2000 using a USB flash drive. Files I put on the Win98 machine can be read by that machine, but not by the Win2k machine. And likewise, I can add and read files on that drive from the Win2k machine, but those files don't appear on the drive when accessed from the Win98 machine. Anyone have ideas as to what could be the cause of this?

  Read the article

• [URGENT HELP PLEASE]USB Flash Drive Problem!

  - by Daren

  Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

  Read the article

• USB Flash Drive Problem!

  - by Daren

  Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

  Read the article

• primary master drive fail

  - by Kelly

  I purchased a new hard drive for my desktop and when I try to boot up the computer with a Windows disc in the drive, it will go through a bunch of screens and ask me which partition I would like to install windows into, but after it goes through the formatting step and reboots, I get a message saying Primary Master Drive Fails. How do I fix this?

  Read the article

• Appropriate USB enclosure to use with an Ultra ATA drive

  - by Topdown

  I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

  Read the article

• TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

  - by Anx Ara

  I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

  Read the article

• How to format drive with partitions

  - by halogenp

  Hi, I have a drive with 3 partitions - Vista, Ubuntu and just storage. Im used to creating an formatting partitions. However I have never formatted a entire drive with partitions. Any pointers to resources would be great. Again I wish to format the entire drive removing the partition. Thanks.

  Read the article

• Recommendations for USB flash drive fast at writing small files

  - by Andrew Bainbridge

  I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

  Read the article

• Virtual box lost files

  - by Paul Lloyd

  I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

  Read the article

• norton ghost error in virtual box

  - by Nrew

  I'm trying out norton ghost on my virtual box guest os windows xp, dual boot with fedora 12. I've boot norton ghost iso. And tried to backup the partition where win xp and fedora is installed but I get this error. I'm backing it up on another virtual disk created through virtual box. What might be the cause of this error, and how to solve it.

  Read the article

• Partition Bootable Flash Drive

  - by iAndr0idOs

  I created a bootable flash drive with Chromium OS installed on it. However, Chromium OS only needs about 4GB of space, and my flash drive is 8GB. I wanted to make the rest of the 4GB a FAT32 partition, but when I look at GParted, I have 12 different partitions on the flash drive with unallocated space scattered everywhere. I made the bootable flash drive with Ubuntu Linux's usb-imagecreator I run Ubuntu Linux 11.04 x86_64 and Windows 7 Professional x64 If any of you have experience with this, any help would be appreciated. Thanks!

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >