Search Results

Search found 593 results on 24 pages for 'wget'.

Page 16/24 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Problem to install Apache 2.4.2 in Ubuntu 12.04

    - by Michael
    I followed these steps to install Apache 2.4.2 in Ubuntu 12.04, but it seems Apache is not installed, here's what I did (I followed the steps in this site http://www.discusswire.com/apache-2-4-installation-ubuntu/): sudo apt-get install build-essential sudo apt-get build-dep apache2 wget http://apache.mirrors.pair.com/httpd/httpd-2.4.2.tar.gz tar -xzvf httpd-2.4.2.tar.gz && cd httpd-2.4.2 sudo ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all --enable-deflate --enable-proxy --enable-proxy-balancer --enable-proxy-http --with-mpm=prefork sudo make sudo make install when I tried to start by issuing sudo /usr/local/apache2/bin/apachectl start at terminal, I got the following warning: "AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message" and when I typed top at terminal, the apache is not there. I also tried to go to http://localhost/ or 127.0.0.1 or even 127.0.1.1 it showed "Can't establish connection to server ..." message. ps: I checked the error log and it showed "[Fri Jul 27 15:49:00.703901 2012] [proxy_balancer:emerg] [pid 20781] AH01177: Failed to lookup provider 'shm' for 'slotmem': is mod_slotmem_shm loaded?? [Fri Jul 27 15:49:00.704083 2012] [:emerg] [pid 20781] AH00020: Configuration Failed, exiting" What I'm missing? Thanks Michael

    Read the article

  • Will open files limit in Centos affect HTTP connections? Does the limit apply to a single session or all sessions?

    - by forestclown
    When I do a ulimit -n I got 256, I assume it means I can open 256 files at the sametime. Does it means I can open 256 files with one single session? or all sessions? For example, I logined to my server with username "abc" (via putty/ssh), and open 200 files, with the session still running, I logined to the same server again with the same username "abc" (via putty/ssh), I can open only another 56 files? or I can open another 256 files? Lastly, does this limit also restrict number of http connections? e.g. with the above example, I have opened 200 files, and then I use "wget" or "curl" to make http connections. Thanks

    Read the article

  • difference between compiled and installed via rpm (zypper)

    - by cherouvim
    In an openSUSE 11.1 I download, compile and install ImageMagick via: wget ftp://.../pub/graphics/ImageMagick/ImageMagick-6.7.7-0.zip unzip ImageMagick-6.7.7-0.zip cd ImageMagick-6.7.7-0 ./configure --prefix=/usr/local/ImageMagick make make install Everything works nicelly until I discover that JPG is not supported: identify -list format | grep -i jpg [nothing related to JPG returned] So I reconfigure and recompile using: ./configure --prefix=/usr/local/ImageMagick --with-jpeg=yes --with-jp2=yes make make install But that changes nothing. I end up uninstalling: make uninstall and installing via zypper: zypper install ImageMagick This installed version 6.4.3 and now it does support JPG: identify -list format | grep -i jpg JPG* JPEG rw- Joint Photographic Experts Group JFIF format Any idea on what is going on here? What is a possible reason that this capability of ImageMagick was not there when compiled from source but was there when installed from rpm? Note that I don't necessarily care a lot about ImageMagick (since it now works), but generally about his kind of behaviour, becase in one way or another I've seen this happen in other ocasions as well.

    Read the article

  • Finding out whether files are added, changed or deleted on a FTP server

    - by futureelite7
    I've recently been given the task to migrate about 200GB of data from one dedicated server to another. As this will take a week or more, I've been taking a snapshot of the current files on the FTP server using wget's mirror feature. However, since other users will probably be uploading / changing stuff in the meantime, the snapshot that I have made will not include the most recent changes. Since I only have access to FTP on this server, I'm planning to write a script that will recursively do a FTP stat on all files in the FTP folder, and compare the directory listing against the snapshot I have locally. If there are differences in the number of files, then I know files have been added or deleted. If the modification dates have been changed, then I know the files have been changed, and should redownload those files specifically. Am I missing anything in my approach, or are there any possible improvements to this approach?

    Read the article

  • yum / rpm / make | When to use which one

    - by Saif Bechan
    I am new to Linux and am running CentOs. When I want to update or install certain software I came across three ways. Sometimes it's: yum install program rpm -i program.rpm wget program.tar.gz unpack ./configure make make install That last one is a real pain, esp when you come from windows where a program install is usually one click and then a nice guide. Now can someone please explain to me: Why are there so many different ways to do this? Which one do you recommend to use and why? Are there any other ways for installing programs?

    Read the article

  • How do I create a .deb file?

    - by JamesTheAwesomeDude
    Yes, I know that this question has been asked many times before, but none of the answers really helped. I'd like to package the Minecraft launcher (which has no proprietary code, AFAIK,) into a .deb file so that I can put it on a flash drive and share it with my friends. I have managed to install Minecraft it manually (put some files into /opt/minecraft, download an icon, and create a .desktop file in /usr/share/applications,) and I have made a shell script that completely automates the process, but it relies on wget to retrieve a few files, including the .desktop file. (It isn't a self-extracting archive, after all.) I'd like to be able to do this offline, as a lot of my friends have slow or no internet. (One of their internet lines was buried so shallowly that it actually got knocked out by the lawnmower.) I won't be loading it into a PPA or anything like that; I just want it to be a "formal" package that can be easily installed and uninstalled. (One thing that I would like is for sudo apt-get purge minecraft to also remove the .minecraft folder. It would also be nice to define the dependedcies as being able to accept OpenJDK or Sun's JVM.) Oh, just so you know, the Minecraft launcher is a .jar file, but I can very, very easily launch it via shell scripts. The exact command is right on the download page.

    Read the article

  • Oracle Virtualbox does not open since upgrade

    - by Langjan
    After upgrading to Ubuntu 12.10, I have been unable to restart my Oracle virtualbox. jan@jan-System-Product-Name:~$ sudo /etc/init.d/vboxdrv setup sudo: /etc/init.d/vboxdrv: command not found Where do I go from here? Can anyone help, please? I tried to install virtualbox via these commands: echo "deb http://download.virtualbox.org/virtualbox/debian $(lsb_release -sc) contrib" | sudo tee /etc/apt/sources.list.d/virtualbox.list wget -q http://download.virtualbox.org/virtu...racle_vbox.asc -O- | sudo apt-key add - sudo apt-get update sudo apt-get install virtualbox-4.2 Attempts to install via package manager vbox would not start. These error reports are received: Because the USB 2.0 controller state is part of the saved VM state, the VM cannot be started.To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 2.0 support in the VM settings (VERR_NOT_FOUND). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {db7ab4ca-2a3f-4183-9243-c1208da92392} I installed the extension pack, no change in result. I have added myself as user, but the error report says user must be added, when I redo add user, it says user is already added. The following outputs were also received:   Failed to open a session for the virtual machine Nuwe skelm. Implementation of the USB 2.0 controller not found! I cannot access the USB 2.0 setting to disable it. Where do I go from here, please?

    Read the article

  • Running make for Nginx throws a “multiple target patterns” error

    - by Justin Meltzer
    When I run make inside my installed nginx directory I get the output: make -f objs/Makefile make[1]: Entering directory `/home/ec2-user/nginx/nginx-1.2.4' objs/Makefile:110: *** multiple target patterns. Stop. make[1]: Leaving directory `/home/ec2-user/nginx/nginx-1.2.4' make: * [build] Error 2 I am on an Amazon Linux AMI. The steps I took from the beginning was wget /path/to/nginx/tarball tar xvf nginx-1.2.4.tar.gz cd nginx-1.2.4 ./configure --prefix=/nginx --a-bunch-of-other-options Then I ran make. Also I installed make by running sudo yum install make Please let me know if there's any other information I should be providing.

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • How to upgrade libxml on CentOS

    - by Radek Simko
    I have a following version of CentOS: $ cat /etc/issue CentOS release 5.5 (Final) Kernel \r on an \m and following version of libxml: $ php -i | grep libxml libxml Version => 2.6.26 libxml libxml2 Version => 2.6.26 libxslt compiled against libxml Version => 2.6.26 and need to have newer version of libxml (primarly for usage in PHP, but obviously, it doesn't matter). If I even install the newer version of libxml somehow: wget ftp://xmlsoft.org/libxml2/libxml2-2.7.2.tar.gz tar -xvf libxml2-2.7.2.tar.gz cd libxml2-2.7.2 ./configure make sudo make install then I am unable to get it to work in PHP - there is still old version: libxml Version => 2.6.26 libxml libxml2 Version => 2.6.26 libxslt compiled against libxml Version => 2.6.26 What else do I need to do to make the new version to work with PHP?

    Read the article

  • Picasa installs but is missing in the menu

    - by Swapnil Narendra
    Acer Aspire One Netbook Running Ubuntu Netbook Remix 10.10 (freshly installed) 1 GB Ram 150 GM HDD Space I am trying to install Picasa and when I do, it runs its course telling me that it has been installed. But when I try to look for Picasa to run it, it didnt show in the menu anywhere. I am unable to find Picasa on my system and it says that it has been installed already when I try to reinstall it. I have tried a few things; looked for the key: wget -q -O - https://dl-ssl.google.com/linux/linux_signing_key.pub | apt-key add - .. and then added it. tried the following commands after adding Picasa to my source list: sudo apt-get upgrade sudo apt-get install picasa and here is what I got: swapnil@iva-swapo-netbook:~$ sudo apt-get install picasa Reading package lists... Done Building dependency tree Reading state information... Done picasa is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. and when I tried to look for Picasa again.. I couldnt find it. So I am unable to install Picasa on my system. Please help. (I am also running this thread on ubuntu forums and havent got the solution yet so I am now here) tried Jorge's solution and it brought Picasa immediately, however I am unable to keep it in the launcher. There is no such option. All I can see is only 2 options: 1. Wine 2. Quit Still need help to keep it in the menu/launcher !

    Read the article

  • I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

    - by talkingnews
    I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

    Read the article

  • apache2 mod_proxy without 301 moved permanently?

    - by Guy Sensei
    Is it possible to not send a 301 moved permanently response to the client when using mod_proxy? I would like the client to deal with the reverse proxy as opaquely as possible. My Virtual Host Settings- relevant snippet ProxyPreserveHost On ProxyPass /GTM http://192.168.1.27/GTM ProxyPassReverse /GTM http://192.168.1.27/GTM wget localhost/GTM --2011-09-27 21:54:22-- localhost/GTM Resolving localhost... ::1, 127.0.0.1 Connecting to localhost|::1|:80... failed: Connection refused. Connecting to localhost|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: localhost/GTM/ [following] --2011-09-27 21:54:22-- localhost/GTM/ Reusing existing connection to localhost:80. HTTP request sent, awaiting response... 200 OK

    Read the article

  • plesk 9 spamassassin server wide blacklist via cron?

    - by Kqk
    hi, we're running ubuntu 8.04 LTS and plesk 9.2 our simple task is to set up a periodic black list for spamassassin, e.g. using this script .. #!/bin/sh #! Script by AJR to update local spamassassin rules cd /tmp wget -c http://www.stearns.org/sa-blacklist/sa-blacklist.current mv sa-blacklist.current local.cf -f mv local.cf /etc/mail/spamassassin -f rm local.cf -f /etc/init.d/psa-spamassassin restart now, this script runs fine, but plesk doesn't seem to recognize the blacklist in its GUI. which is annoying, especially because plesk itself writes to /etc/mail/spamassassin/local.cf. i wasn't able to find out the secret place, where plesk distinguishes between entries in local.cf added via GUI and command line. any help is appreciated! thanks.

    Read the article

  • CentOS (rel6) with default python 2.6, but seperate 3.3.5 installation

    - by Silvertiger
    I have a CentOS server (rel6) that had python installed (2.6), but I needed a few features in 3.3+. I installed 3.3 into a seperate folder and made a symbolic link to execute it: I installed setup tools: yum install python-setuptools I installed a needed module"pandas" easy_install pandas I executed my pyton script, which encountered an error that required i use a newer version I downloaded and installed Python 3.3.5 to it's own folder so as to not override my default python wget http://www.python.org/ftp/python/3.3.5/Python-3.3.5.tar.xz tar xJf ./Python-3.3.5.tar.xz cd ./Python-3.3.5 ./configure --prefix=/opt/python make make install Made s symbolic link to allow me to execute this new python: ln -s /opt/python3.3/bin/python3.3 ~/bin/py The problem is that when I execute the python script with my new py alias, it does not have all the addons needed (explicitly MySQLdb) which the default install does. How do i go about installing the MySQLdb module, or any for that matter, to be reachable or useable for the new Python 3.3.5 installation? Or is there a way to make the current modules in 2.6 available to 3.3.5 as well?

    Read the article

  • Howto configure openSuSE firewall to route local traffic to local ports

    - by Eduard Wirch
    I have openSUSE 11.3 installed. I'm using the openSUSE firewall configuration mechanism (/etc/sysconfig/SuSEfirewall2). I have a http server application running on port 8080. I want the http service to be accessible using port 80. I created a redirect rule usign: FW_REDIRECT="0/0,0/0,tcp,80,8080" This works fine for every request coming from external. But it doesn't for local requests. (example: wget http://myserver/) Is there a way how I can tell the firewall to redirect local requests addressed for 80 to port 8080? (using the SUSE firewall configuration file)

    Read the article

  • How to download Firefox extensions from addons.mozilla.org without installing them?

    - by kjo
    Pages at the https://addons.mozilla.org/en-US/firefox site often feature buttons that say "Add to Firefox". Clicking on such a button causes a Firefox extension to be downloaded and installed. I am looking for a convenient way to limit this action to the download step only, so that in the end I am left with the downloaded *.xpi file in my disk. Thanks! P.S. The following approach is not only inconvenient: it doesn't work!. Inspect the HTML for the button, and extract a URL like https://addons.mozilla.org/firefox/downloads/latest/1234/addon-1234-latest.xpi?src=search give or take the stuff after .xpi. at the command-line prompt, download this URL with wget or curl. This download attempt just hangs. (Even if it didn't, I'd like to find a less cumbersome approach.)

    Read the article

  • Modify HTML Content with Squid

    - by user38400
    We have setup our network as per the tutorial here: https://help.ubuntu.com/community/Upside-Down-TernetHowTo. Basically, we have a squid proxy that inverts images for pages that clients request. We're trying to modify the script so that we can edit the contents of the webpage before the webpage is sent to the client. We are not having any luck. I'm wondering if there is something different about .html files that makes this not possible. What is happening is that we do a wget on the URI that is requested, save it locally, modify it and then echo back the new URI. The page that the user gets is the unmodified page and not the one that we just changed.

    Read the article

  • How can artificially create a slow query in mysql?

    - by Gray Race
    I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

    Read the article

  • Monitoring/logging a malfunctioning internet connection

    - by Pekka
    I have a mysterious internet connection problem: Every 15-20 minutes, the connection will become very slow, and take 2-3 minutes for anything to load. I've had a technician from the ISP over here to test the hardware, and everything is in pristine condition. They have no other explanation than a configuration error on my machine, a possibility I can exclude 90% because I'm experiencing the same problems with another machine. I will have to monitor the situation now, and I would like to run a program that logs when internet connections become slow. I thought about putting something together using at and wget. Does anybody know of some other tool for this that does this out of the box - maybe something with an adjustable request frequency, logging connection speeds etc.?

    Read the article

  • What is the fastest way to reload history commands begin with certain characters in linux?

    - by gerry
    In Dos we can input the first several characters to filter command history and find proper one rapidly. But how to do the same thing in Linux ? for example when I am testing a local server: cd sudo /etc/init.d/vsftpd start wget ... ls emacs ... sudo /etc/init.d/vsftpd restart sudo /etc/init.d/vsftpd stop ... In Dos you can easily type sudo and switch among the three commands beginning with it using arrow keys. But in Linux, is below command the best we can do ? historty | grep sudo I don't like it, because history can easily become a mess, and it also need mouse action.

    Read the article

  • How can I install oracle-java7 from webupd8 ppa?

    - by Ahmed Zain El Dein
    I installed ppa:webupd8team/java and I get the following error Output from: sudo apt-get install oracle-java7-installer Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: binfmt-support visualvm ttf-baekmuk ttf-unfonts ttf-unfonts-core ttf-kochi-gothic ttf-sazanami-gothic ttf-kochi-mincho ttf-sazanami-mincho ttf-arphic-uming The following packages will be upgraded: oracle-java7-installer 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 0 B/16.0 kB of archives. After this operation, 64.5 kB of additional disk space will be used. Could not exec dpkg! E: Sub-process /usr/bin/dpkg returned an error code (100) i did afterwords those line of code trying to resolve the issue becuase it is not existed actually in the /usr/bin/dpkg there is no dpkg mkdir /tmp/dpkg cd /tmp/dpkg wget http://archive.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_1.15.5.6ubuntu4_i386.deb ar x dpkg*.deb data.tar.gz tar xfvz data.tar.gz ./usr/bin/dpkg sudo cp ./usr/bin/dpkg /usr/bin/ sudo apt-get update sudo apt-get install --reinstall dpkg then i get this $ sudo apt-get install --reinstall dpkg Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 6 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,814 kB of archives. After this operation, 0 B of additional disk space will be used. dpkg: warning: 'dpkg-deb' not found on PATH. dpkg: 1 expected program(s) not found on PATH. NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) How can I fix this?

    Read the article

  • Download/update webpages listed in XML sitemap

    - by unor
    I'm searching a FLOSS tool that downloads all pages (and embedded resources, e.g. images) linked in a XML sitemap (built according to http://www.sitemaps.org/). The tool should "crawl" the sitemap regularly and look for new and deleted URLs and changes in the lastmod element. So whenever a page gets added/deleted/updated, the tool should apply the changes. Some sitemaps list sub-sitemaps in sitemapindex?sitemap. The tool should understand this and load all linked sub-sitemaps and look for URLs in there. I know there are tools that allow me to extract all URLs from the sitemap, so that I could feed them to wget or similar tools (see for example: Extract Links from a sitemap(xml)). But this wouldn't help in getting noticed about updates to pages. Tracking the webpages itself for updates doesn't work, because "secondary" content on the pages changes daily, but lastmod gets only updated when relevant content changed.

    Read the article

  • Installing Plone on Centos fails: Unable to find libssl or openssl/ssl.h.

    - by paskster
    My dedicated Server has CentOS 5.5. I tried to install Plone, so I basically did: wget launchpad.net/plone/4.0/4.0.2/+download/Plone-4.0.2-UnifiedInstaller.tgz tar xzf Plone-4.0.2-UnifiedInstaller.tgz cd Plone-4.0.2-UnifiedInstaller ./install.sh zeo I ran into the following error: Unable to find libssl or openssl/ssl.h. If you wish to build without SSL support, run install.sh again with --without-ssl flag. Otherwise, install your platform's openssl-dev libraries and headers and try again. After this error I successfully installed openssl: yum install openssl And i tried to install Plone again. But I keep getting the error: "Unable to find libssl or openssl/ssl.h". Anybody an idea what I'missing?

    Read the article

  • Trying to migrate Windows 7 install of Adobe CS5 to Ubuntu 12.04 with Wine - 'Internal errors - invalid paramters received"

    - by Don
    I have Adobe CS5 installed and running on the Windows 7 side of my machine. Since I'd hate to boot up into Windows just to use Photoshop, I'm trying to get it in Ubuntu 12.04. Tutorials I found suggested that the easiest way to have it in Ubuntu was to install Wine, and copy my Windows installation over. Here are the exact steps I've done up to this point. From Windows, exported the registry key for HKEY_LOCAL_MACHINE SOFTWARE Adobe to the desktop. Changed to Ubuntu, downloaded Wine from Software Center Terminal: $ sudo apt-get install wine ttf-mscorefonts-installer $ winecfg $ wget http://www.kegel.com/wine/winetricks $ sh winetricks msxml6 gdiplus gecko vcrun2005sp1 vcrun2008 msxml3 atmlib Moved registry export to home folder. Copied "Program Files (x86)\Adobe" to "~/.wine/drive_c/Program Files (x86)/Adobe" "Program Files (x86)\Common Files\Adobe" to "~/.wine/drive_c/Program Files (x86)/Common Files/Adobe" "Documents and Settings\Don\Application Data\Adobe" to "~/.wine/drive_c/users/don/Application Data/Adobe" "Windows\System32\odbcint.dll" to "~/.wine/drive_c/windows/system32/odbcint.dll" ,and lastly "Windows\System32\odbc32.dll" to "~/.wine/drive_c/windows/system32/odbc32.dll". From Terminal, $ wine regedit adobe.reg. Right clicked on Photoshop.exe and selected "Open with Wine". Got the message "Wine Program Crash, Internal errors - invalid parameters received." So to restate my question, How can I get Photoshop running in Ubuntu 12.04? I'm not sold on doing it in this specific way, I just want to use Photoshop without having to reboot. What's the best way to make this happen? Edit: I do not have the installation CD, no.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >