Search Results

Search found 35634 results on 1426 pages for 'internet directory'.

Page 160/1426 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • Best way to troubleshoot intermittent network outages?

    - by Ben Scheirman
    We have a Comcast 50/10 line into our office. We keep seeing very short but sometimes frequent drops in our internet service. It's enough to kick you off of skype and stop any websites from loading, which is obviously affecting our productivity. We've tried 4 different routers, we've tried moving everyone off of wireless and onto wired via a switch and so far nothing has helped. Right now we're on a Cisco SB WRP400-G1 router. Attached to the router is a 16 port switch going to the ports in all of the offices. We've moved to OpenDNS in the case that it was the comcast DNS servers going down. Today we tried putting the modem, router, and switch on a UPS to make sure it wasn't power fluctuations that was causing it. Every time we call Comcast, by the time they are here the internet is working fine. I'd like to somehow prove that the problem is with Comcast, so if that means plugging in a machine directly into their router and collecting data all day, I'm up for that. I just want to hear ideas on what tools to run and how to collect this data. I could just continuously ping google.com all day long but I'm not sure how valuable that data would be. Thoughts?

    Read the article

  • Internet Troubles - PPPoE vs PPPoA?

    - by AkkA
    I have been having some internet troubles at home (ADSL2+ connection in Australia). We get random drop-outs from the authentication connection. It will keep the connection to the DSL service, but we lose authentication and either have to restart the router/modem (its combined, a Belkin one, not sure on model number) or unplug the phone cable, wait about 30 seconds and plug it in again. I've called the ISP (Telstra) a few times, but they only offer limited support when we dont use their supported hardware. Apparently something had happened on their side, they checked the box again (at least it sounded that simple), and told me it would be fine. It wasnt. I've replaced all the filters around the house, but that didnt help either. We do live a little bit away from the exchange (get a sync speed of about 3000/900), so I thought it could be due to line noise but that hasnt helped. Telstra allow both PPPoE and PPPoA connections (which I'm configuring through my router, dont have software on the PC side). I've been running PPPoA the whole time, would it make any difference changing it to PPPoE? If not, are there any other theories as to why we would be experiencing these drop-outs? It has been fine for at least 12 months, then suddenly started about 2 months ago.

    Read the article

  • Lion MacBook Pro will not load webpages with DNS just after wake

    - by NReilingh
    I'm working with a 2011 MacBook Pro running Lion (10.7.2), that after waking from sleep (i.e. opening the lid) takes an inordinately long amount of time (2-3 minutes or more) to get a usable internet connection. Upon waking, the wi-fi icon signifies it is negotiating a network connection, and completes one a few seconds later. At this point, network diagnostics will not show any issues, and everything in Network preferences looks as normal: I'm connected to the proper network, have the right IP address and gateway, and DNS settings are correct. However, any site accessed with a domain name (like http://www.google.com) in Safari will return the "You are not connected to the Internet." error. Accessing a site directly, say, with Google's 74.125.226.212, is successful. Yet, Network Diagnostics will insist that DNS is functioning properly. After a few minutes, the following lines will be printed to the Console log, and regular behavior will be restored. 11/18/11 8:11:31.288 PM airportd: _doAutoJoin: Already associated to “Wireless”. Bailing on auto-join. 11/18/11 8:11:32.000 PM kernel: en1: BSSID changed to 00:25:9c:63:91:bd This behavior occurs only when waking from sleep--not when turning wi-fi on and off. This problem also occurs when using a wired Ethernet connection. As per this thread, I have tried flushing the DNS cache and wiping the wireless network from memory (it's not a protected network). Neither have worked.

    Read the article

  • Synchronize folders on different computers without cloud and without network just internet

    - by theimmortalbg
    I have two computers with windows 7, one in my home town and one in another town. So they are not in private network but I have internet on both. They have exactly the same file structure. I am searching for program that can keep the data equal. I know about dropbox or google drive but they are cloud and I don't want to use them. Also they are using folder that you should copy your data in it. There is another programs that are like a server, just put something and after that you can download it but I dont need them. I want just to point which folders to be synchronized and the program make the synchronization. The sync can be in real time if the two computers are powered, or after few time when they are powered. Or it can lock another computer synced folder till update is required. At all this is my documents that I want to be synced in all my computers and to be changed from where I want. In fact I can move the updates with flash but if some program save the changes and make them on another computer with one click it will facilitate my work.

    Read the article

  • Remove directory from URL IIS 7.5

    - by xalx
    I've tried to find a solution to this and found some guides out there but none seem to work. I have the following URL - http://www.mysite.com/aboutus.html However there are some other sites which link to my old hosted site and point to http://www.mysite.com/nw/aboutus.html. My issue here is trying to remove the 'nw' directory from the URL's. I have setup the following URL Rewrite in IIS but it does not seem to do anything, <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="Redirect all to root folder" enabled="true" stopProcessing="true"> <match url="^nw$|^/nw/(.*)$" /> <conditions> </conditions> <action type="Redirect" url="nw/{R:1}" /> </rule> <rule name="RewriteToFile"> <match url="^(?!nw/)(.*)" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> </conditions> <action type="Rewrite" url="/{R:1}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Any insight would be appreciated.

    Read the article

  • Data recovery from corrupt Ubuntu partition/directory (question about a previous answer)

    - by JoshMaurice
    I have an Ubuntu installation that won't boot anymore. I asked my previous question about it here: http://superuser.com/questions/15916/ubuntu-chkdsk-equivalent Bolotov replied: As I see from your previous question you can boot Windows so you could use dskprobe from Windows XP Service Pack 2 Support Tools to make sure that fs type is correct ... but it's already correct fs type 7 is NTFS. Message "The type of the filesystem is RAW. CHKDSK is not available for RAW drives." means that windows can't determine fs type for some reason. As we see fs type is correct. To run Chkdsk on your Windows partition you can install Windows Recovery Console, boot in recovery console and check your disk. After checking the disk you will gain access to you c:\ubuntu\disks. I think you can mount your linux partition (which is in file) as usual loop-back device: mount -o loop [path to your linux-loopback-partition] But you should mount windows patrition first. So now I'd like to know: Within the recovery console I will be issuing the commands "chkdsk -r" and then "mount -o loop [path to windows partition]" and then "mount -o loop c:\ubuntu\disks", correct? I do have a ("corrupt and unreadable") c:\ubuntu\disks directory so that appears to be the correct path to the linux partition; do you know the path to the windows partition? would that be just "c:\"?

    Read the article

  • Allowing access to company files accross the internet

    - by Renaud Bompuis
    The premise I've been tasked with finding a solution to the following scenario: our main file server is a Linux machine. on the LAN, users simply access the files using SMB. each user has an account on the file server and his/her own access rights. user accounts are simple passwd/group security accounts, not NIS/LDAP. The problem We want to give users (or at least some of them, say if they belong to a particular group) the ability to access the files from the Internet while travelling. Ideally I'd like a seamless solution. Maybe something that allows the user to access a mapped drive would be ideal. A web-oriented solution is also good but it should present files in a way that is familiar to users, in an explorer-like fashion for instance. Security is a must of course, and users would be expected to log-in. The connection to the server should also be encrypted. Anyone has some pointers to neat solutions? Any experiences? Edit The client machines are Windows only.

    Read the article

  • nginx giving 404 when accessing php from alias directory

    - by code90
    I am trying to migrate from apache to nginx. The php sites that I am hosting need to access a shared library which turns out to be an alias directory. Below is the configuration I came up with. html files work fine, but php files giving 404. I have read through and tried most (if not all) of the answers to the similar questions with no any success. Any hint on what might be causing the issue in my case? location /wtlib/ { alias /var/www/shared/wtlib_4/; index index.php; } location ~ /wtlib/.*\.php$ { alias /var/www/shared/wtlib_4/; try_files $uri =404; if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass 127.0.0.1:9013; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/shared/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Thanks all ! Update: Following seems to be working fine: location /wtlib/ { alias /usr/share/php/wtlib_4/; location ~* .*\.php$ { try_files $uri @php_wtlib; } location ~* \.(html|htm|js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location @php_wtlib { if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; }

    Read the article

  • DSL Connection drops

    - by user60024
    Ok, I just moved so I had to switch from Cable to DSL. I know very little about computers or internet connections and such, so I had AT&T come out to the new house to set up their highest speed. When they got here, they told me that I needed to downgrade to 3.5mbps because I was too far away. Well we did and everything was going great for two days until I started experiencing random disconnects which have been happening now for about 2 to 3 weeks. I am using a N300 Wireless Dual Band ADSL2+ Modem Router and my ethernet cable is hooked directly into my computer from it. I recently started to notice that it disconnects around 5:30 and 8:30, which may be because a lot of people are on their computers(?) and that it works perfectly fine, almost, all the time if I'm not playing a game. During this time, when I try to load up World of Warcraft the Internet light disappears and the DSL light begins blinking. (So maybe it's too much for the modem and it resets?) Other than that it is amazing, but I'd like to try and fix some of these problems. If you need more information, let me know on how to get it for you and what to do. Thanks for the help!

    Read the article

  • Does ICS modify windows firewall policies in the registry?

    - by insipid
    I had a host machine I wanted to enable ICS on. First I realized that doing so was not possible until I enabled the Windows Firewall. Once I enabled the firewall and set up ICS, I noticed due to group policy I could no longer disable the firewall. Also, any ports I tried to open seemed to be ignored. Although nothing seemed to be configured when I used the mmc snap-in to view local computer policy, when I checked the registry I noticed several policies set there in HKLM (such as disabling AllowLocalPolicyMerge). I was able to remove the policies from the registry and my open ports worked, but they were eventually re-added without my input. The network I am sharing the internet from is an "unsecured" wireless network with an authentication page, is it possible that this is causing those policies to be set? Did ICS set those policies? When you go to the properties of the ICS enabled adapter and go to the ICS settings it takes you to a tab called services where you can add and remove "services running on your network that internet users can access". Is this related to the windows firewall?

    Read the article

  • Two internet connections at once in Windows 7

    - by webmasters
    I have a 3G wireless modem and I have a LAN - Right now they are both connected. I need a way to choose which applications will use the 3G connection and which applications will use the LAN. My Operating System is windows 7. How can I do this? Any ideas? Here is a route print: - the 3G modem's IP is 10.81.132.96 Lets say, for example, map google.com to using the 3G internet connection. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.102 20 0.0.0.0 0.0.0.0 10.81.132.97 10.81.132.111 286 10.81.132.96 255.255.255.224 On-link 10.81.132.111 286 10.81.132.111 255.255.255.255 On-link 10.81.132.111 286 10.81.132.127 255.255.255.255 On-link 10.81.132.111 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.2.0 255.255.255.0 On-link 192.168.2.102 276 192.168.2.102 255.255.255.255 On-link 192.168.2.102 276 192.168.2.255 255.255.255.255 On-link 192.168.2.102 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.2.102 276 224.0.0.0 240.0.0.0 On-link 10.81.132.111 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.2.102 276 255.255.255.255 255.255.255.255 On-link 10.81.132.111 286 ===========================================================================

    Read the article

  • file system that allow to specify different RAID level per directory and change it afterward

    - by Adam Ryczkowski
    I have 5 hard drives, where I want to keep my data. Some of my files are more important, and some of them are less. So some of them I wish to put on RAID-6, and for some it RAID-5 is sufficient. It is difficult to predict at the moment of creation of the arrays how much space of each type to declare. What I would do if I didn't hear about zfs, is partition the hard drives into identical 100GB partitions, and as my needs grow, assemble those partitions into md devices using linux-raid. Then, I'd combine those devices using lvm into logical volumes where I'd put my data. So when I'd need more space of e.g. RAID-6, I'd take 100GB partition from each hard drive and assemble them into another RAID-6 md device and would use it as physical storage for the logical volume group dedicated for RAID-6 data. Then I could grow the file system on this logical volume. On top of RAID-6 and RAID-5 Volume Groups (managed by lvm) would reside completely independent file systems, which I'd later merge with multiple mount --bind into a single directory structure that would reflect the logical structure of data rather that of the storage. But now, when I heard about the ZFS with all the performance, data-healing and compression capabilities I cannot stop thinking if it can help me. If so, what do you think would be the best setup?

    Read the article

  • Simple Distributed Disconnected way to sync a directory

    - by Rory
    I want to start regularly backup my home directory on my ubuntu laptop, machine X. Suppose I have access to 2 different remote (linux) servers that I can backup to, machines A & B. Machine X will be the master, and should be synced to A and B. I could just regularly run rsync from X to A and then from X to B. That's all I need. However I'm curious if there's a more bandwidth effecient, and hence faster way to do it. Assuming X is going to be on residential style broadband lines, and since I don't want to soak up the bandwidth, I would limit the transfer from X. A and B will be on all the time, however X, will not be, so I'd also like to reduce the amount of time that X is transfering, potentially allowing A and B to spend more time transfering. Also, X won't be connected all the time. What's the best way to do this? rsync from X to A, then from A to B? Timing that right could be troublesome. I don't want to keep old files around, so if I was to rsync, then the --del option would be used. Could that mean something might get tranfered from A to B, then deleted from B, then transfered from A to B again? That's suboptimal. I know there are fancy distributed filesystems like gluster, but I think that's overkill in this case, and might not fit with the disconnected nature.

    Read the article

  • KVM virtual machine unable to access internet

    - by peachykeen
    I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

    Read the article

  • Mounted NFS directory not writable by Apache / PHP

    - by phpfour
    Need some help here with NFS. Here's what I have (all servers running CentOS 5.6 with SELinux): 172.17.20.1 - Primary server with static IP. Varnish redirects requests to the web servers. 172.17.20.2 - Web server 1 172.17.20.3 - Web server 2 The application residing on the web servers is running Drupal and I need both of them to share the same files directory. I have created a folder in 172.17.20.1 called /var/nfs with root user. Here is my /etc/exports content: /var/nfs 172.17.20.2(rw,sync,no_root_squash) 172.17.20.3(rw,sync,no_root_squash) On both the web servers (172.17.20.2/3), I have it mounted like below: [root@web2 ~]# mount ... 172.17.20.1:/var/nfs on /mnt/nfs/var/nfs type nfs (rw,sync,hard,intr,addr=172.17.20.1) On all the servers, I've added the user apache to the root group to get the desired write access: [root@main ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: [root@web1 ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: Despite all this, when I try to write files into the /mnt/nfs/var/nfs folder from Drupal/PHP, it cannot write to it. I even tried with a simple PHP upload script but it doesn't work, so the problem is not with Drupal. Any help you guys can do is much appreciated. I've spent hours and hours with it, without any success :( Thanks in advance.

    Read the article

  • map linux drives to windwos 7 for media stream over internet

    - by Ortix92
    I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

    Read the article

  • Steps to debugging web site latency and timeout issues

    - by Paperjam
    I have a client who has multiple offices around the country, all of which share the same Internet connection via their WAN. One specific office for this client is experiencing severe latency and timeout issues with my web site. Most, but not all, of the latency occurs on a specific ASPX page where multiple postbacks are made while populating cascading dropdown lists (rapid form submits). The latency is sporadic and can be anywhere from a few seconds to a full timeout. There is no indication that the timeouts are occurring on the server's end. The IT guy for this client is having trouble narrowing down the problem. Since it is affecting only one location for one client, I am led to believe it is not something with my site but something specific to that location. He's measured ping times while using the site and has noticed no real variance in ping times even when the page has timed out. I believe this may be being caused by some sort of Internet filter that doesn't like rapid form submits, but beyond a hunch I haven't a clue. My question is what things should I tell the IT guy to look for? While I'm not trying to provide active tech support for this issue, I would at least like to glean an understanding of what is going on and try to offer some sort of advice. Thank you.

    Read the article

  • Windows 7 'Unidentified Network'

    - by Throdne
    So my internet was working last night before I went to bed and woke up to a computer that is showing unidentified network. I have tried multiple ways of fixing it. > route delete 0.0.0.0 > uninstalling drivers - restart - reinstall from downloaded drivers > ipconfig /release - /renew > static IP > speed & duplex from auto negotiation to 1.0gbps full duplex > and also changed my network address to no value to 1234567890ab (not in that order) nothing seems to work. I have Comcast internet and when I connect the computer to the modem it works perfectly. but when I connect it to my router again, Unidentified network. I know my router isn't faulty, because my macbook pro, server, NAS, iPhones, and iPads are still working. I have also tried moving the port on the router, still same problem. my router is a: Cisco Small Business RVS4000 motherboard: GIGABYTE GA-990FXA-UD3

    Read the article

  • wireless to wired internet

    - by Mark T
    My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

    Read the article

  • Hibernate & Sleep broken after IE 9 RTM installation in Windows 7 x64.

    - by AKa
    I have a question about hibernation. I installed Internet Explorer 9 RTM x64 on my Windows 7 x64 SP1 desktop machine. After this, computer don't entry the hibernation or (hybrid) sleep state properly. After I hibernate the computer the monitor become blank screen and the keyboard and mouse are inactive. But the machine is still running and there isn't any possibility to switch them off as only with power button. But this is recognized on next start as ineligible because of log entry with message “The previous system shutdown at xx:xx:xx on ?xx.?xx.?x was unexpected“ and menu with safe mode option. I’m clearly not sure if it has something to do with Internet Explorer installation, but I’m definitely guaranteed that before of this I never had some problems with hibernation or (hybrid) sleep. In Windows logs isn’t something suspect. I switched the hibernation off and on, installed new drivers for mainboard, graphic and network card, checked the hard disk, nothing was helpful. This is really sad, beacuse I don't like to switch the computer completely off because it takes longer to boot. Any suggestions?

    Read the article

  • No outbound internet connection after restarting CentOS 6.3

    - by wnstnsmth
    After restarting a headless CentOS 6.3 machine, it lost outbound internet connectivity, i.e. I can still connect to the server via SSH (ssh root@**.126.18.56), but stuff such as ping google.com gives google.com: unknown host, and yum list some_package gives a lot of network errors. This is what ifconfig gives: eth0 Link encap:Ethernet HWaddr 00:25:90:78:2D:5D inet addr:**.126.18.56 Bcast:**.126.18.255 Mask:255.255.255.0 inet6 addr: fe80::225:90ff:fe78:2d5d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:75594 errors:0 dropped:0 overruns:0 frame:0 TX packets:787 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7074741 (6.7 MiB) TX bytes:144391 (141.0 KiB) Interrupt:20 Memory:f7a00000-f7a20000 eth1 Link encap:Ethernet HWaddr 00:25:90:78:2D:5C UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Memory:f7900000-f7920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:504 (504.0 b) TX bytes:504 (504.0 b) I have absolutely no clue how to debug this, and I find it very strange since I can still connect via ssh. EDIT: Weirdly, /etc/resolv.conf does not contain any entries, or none that I can make sense of: # Generated by NetworkManager search sui-inter.net # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com So is it possible that rebooting the server erased that file? It worked before at least! And how do I solve this? By the way, pinging an IP address works.

    Read the article

  • How to change the MAC address in Win 8 to spoof a Roku Player through a WiFi splash page?

    - by luser droog
    My Linux laptop died yesterday and now I can't watch TV. Let me explain. I use a Roku Player to stream Netflix shows to my television; and a year or two ago, the Internet Service provided in my apartment complex added a Splash Page to get through the router and onto the net. After not too many days, I remembered that internet devices identify themselves with a MAC address. So I delved into the manpage of ifconfig and discovered that I could persuade my laptop to pretend to be the Roku Player, connect, click through the Splash Page, disconnect and change it back. This would allow the Roku to connect for about 24 hours, when I would have to do it again. But the laptop died yesterday during my smoke break. So during lunch, I ran to OfficeMax and got a new one. But I don't know where to begin looking for where to change the MAC address (assuming it's possible). I know I can try dual-boot, or a keychain OS, or possibly other things to resurrect my old method. But, is it possible to get Windows do it?

    Read the article

  • Need to set up a proxy on Linksys E3200 to filter home internet

    - by Justin Amberson
    the fact that I have a Linksys E3200 may not be important. I can configure the router through the web interface, but I don't know the things I will be toggling are called. I already do simple port forwarding to access applications on my Mac remotely. So router admin is not something I technically need explained. I'm looking to running a proxy on my home computer, that filters all HTTP traffic that goes through my router. So if my daughter is on her iPad and accesses Safari, my Mac will be the judge of the validity of the request. I need something like NetNanny I guess, but local. Actually, anything that can just filter all port 80 traffic that runs locally, but maybe validates with a password? I truly truly hope this question falls within the bounds of Serverfault. I'm not a total internet newb but I'm at a loss for what to Google. If possible answer this question: Is there a webapp that can listen on port 80, and validate requests to port 80 with a password? If so, can I forward all traffic on port 80 to my Mac, to be re-routed to the user? Is this the same as a VPN? Thank you for your help. Justin

    Read the article

  • Java games applet not connecting to Yahoo

    - by Steve
    Hi. I am trying to play a Y! game which use a java applet. The applet displays the message: Alert. Unable to connect to server. One of four things could have caused this: 1) You are behind a firewall. 2) You are not connected to the internet. 3) The games server is down. 4) You have a stale page in your cache. I have added an exception to the Windows firewall for java.exe. I am obviously connected to the Internet okay. The games server is not down when I am at home. I doubt it is down when I am at work. I have never successfully loaded this page before, so I doubt I have a stale page in cache. Could it be the corporate firewall? Nothing else in my web browser has been blocked before. Maybe the java applet connects on a different port to the browser. What should I test?

    Read the article

  • Urgent: how to deny read access to a ExecCGI directory

    - by Malvolio
    First, I can't believe that that isn't the default behavior. Second, yikes! I don't know how long my code's been hanging out there, with all sort of cool secret stuff, just waiting for some hacker who knows Apache better than I do. EDIT (and apology) Well, this is sort of embarrassing. Here's what happened: We had some Python scripts available to the web, at /aux/file.py, which were not surprisingly at /var/www/http/aux . Separately, we were running an app server and Apache proxies through at /servlets/. A contractor had constructed the WAR file by bundling up all the generated files including the Python files (which are in a directory also called aux, not surprisingly), so if you typed in /servlets/aux/file.py, the web-server would ask the app-server for it and the app-server would just supply the file. It was the latter URL that this morning I happened to type in by accident and lo, the source appeared. Until I realized the shear unlikelihood of what I had done, the situation was rating about 8.3 on the sphincter scale. After a tense half-hour or so I realized that it had nothing to do with the CGI (and that serving files that were also executable would be not only foolish but also impossible), and was able to address the real problems. So -- sorry, everybody. Let the scorn-fest commence.

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >