Search Results

Search found 87838 results on 3514 pages for 'windows 7 phone database'.

Page 160/3514 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • Unmountable boot volume blue screen, what should I do?

    - by Josh
    I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

    Read the article

  • SBS2003 to SBS2011 Migration - Installation Error

    - by Shawn Gradwell
    Microsoft Small Business Server 2003 to 2011 Migration. I followed the Migration Guide from Microsoft and the source server had no errors when running the various tests prior to the migration. I have completed the destination server setup using the Answer File and the server is up and running. It all looks good, I can access Exchange and AD and the only problem is the error message when you log in stating that the setup did not complete and to check the logs. Because all looks good I am continuing the migration to the destination server. I also have to state that this client does not use Sharepoint at all. Do I have to redo everything? Herewith the logs: [4992] 121016.225454.5905: Task: Starting Add User or Group access VSS registry. [4992] 121016.225454.7645: TaskManagement: In TaskScheduler.RunTasks(): The "ConfigureSharePointVSSRegistryTask" Task threw an Exception during the Run() call:System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) [4992] 121016.225454.7655: Setup: An error was encountered on the TME thread: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) [4956] 121016.225455.0685: Setup: _UnhandledExceptionHandler: Setup encountered an error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: The TME thread failed (see the inner exception). ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter.TasksCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass._LaunchWizard() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.RealMain(String[] args) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.Main(String[] args) [4956] 121016.225455.0865: Setup: Removed the password. [4956] 121016.225455.0905: Setup: Deleting scheduled task at path Microsoft\Windows\Windows Small Business Server 2011 Standard with name Setup [4956] 121016.225455.8055: Setup: Removed SBSSetup from the RunOnce.

    Read the article

  • Storing changes to multiple databases in a single centralized database

    - by B4x
    The setup: multiple MySQL databases at different locations with the same scheme. The databases are in production. The motivation: we want to present information in these databases in a web interface, clearly showing which database the row originated from. We want to be able to get this data from one single source (for different reasons, one of them is pagination which gets tricky if you use multiple sources). The problem: how do we collect data from multiple databases, storing it at a central location and clearly marking the origin of each row? We have discussed using a centralized DB that tracks changes to the production DBs, with the same schema and one additional column for origin. If possible, we would like to avoid having to make changes in the production environment. Since we can't use MySQL's replication (multiple masters to a single slave isn't allowed), what are our other options? Are there any existing solutions for something like this or do we have to code something ourselves? Is the best solution to change the database schemas in production and add a column for origin? The idea of a centralized database isn't set in stone. If there is a solution to this that solves our other problems without a centralized DB, we can be flexible. Any help is much appreciated.

    Read the article

  • Windows: How to make programs think they're not running in a terminal server session?

    - by sinni800
    I am using the program "SoftXPand 2011 Duo" by Miniframe on my Windows 7 PC. It makes two workstations out of one computer. It uses the terminal services built into Windows to create the additional session. I use two screens, two keyboards and two mice to create this "illusion" of two computers. It works quite well and I can even play two different 3D games on the two screens attached to this single machine (using a Radeon HD5770 and a Core i5 2500k with 8 Gbytes RAM). There are a few downsides to this. I just found about one that is hidden on the first look. The sessions you are in (even on the first workstation) will identify as a terminal server session! Now some programs will run with limited effects (graphical), and some won't run at all. This also resulted in some games not running at all. They just say "Cannot be run in a terminal server session" and exit. I have already proven that top modern games (DirectX 10, 11) run just as good as on the same machine without SoftXPand, so this is a pretty artificial limitation! So, can I somehow hack my current session so it doesn't look like a terminal server session anymore? I. E. #include <windows.h> #pragma comment(lib, "user32.lib") BOOL IsRemoteSession(void) { return GetSystemMetrics( SM_REMOTESESSION ); } Will return FALSE? (Not a programming question! Just an example how programs detect if they're in a terminal server session!)

    Read the article

  • Can somebody please recommend a good local file backup utility that will be Windows & OSX Compatible?

    - by JAG2007
    I have an external hard drive that I keep all of my work files on and transfer them back and forth between my Windows 7 box at work, and my Mac at home (I work from home frequently). Can someone recommend a really good backup utility that I can use on that external drive, to back the files up to my work computer locally, or the other external drive on my machine at work? I'm looking for preferably a free or open source software, and I'd prefer it to be cross system compatible, although I would also consider using a software that will only work on the Windows box. Also, I will consider a software that has a price assuming it is a really good piece of software and the price is reasonable (like under $50 or so). I checked out CrashPlan a bit, but not sure if that's gonna be really what I'm looking for. To reiterate I'm not looking for online backup solutions, just a piece of software that can back up my data to another drive locally. CrashPlan Free seems to offer this, but not sure how good it is (considering their goal is to get me to buy a pay for version). *NOTE: I'm running Windows 7 in 64bit so I need a piece of software that will be compatible with 64bit OS. My previous software, PC Backup, is not. That's partly why I'm in this boat.

    Read the article

  • How can I take a one time full backup of a Windows Server without the need for a restore program?

    - by TheCleaner
    I have a Windows SBS server with about 500GB of data that I'm decommissioning but I'd like to take a final backup of the server and place it on an external USB drive. I already have multiple backups of the server on disk from the past but they are through Simpana Commvault. I'd like a backup that will simply copy the file structure, ACLs, timestamps, etc. as is to a NTFS volume on the external drive. This way if someone says "I need x file on the server you decommed" I can search the external drive real quick instead of firing up Commvault, cataloging, restore, etc. I know the built-in Windows backup is great, I just don't feel like running it for a restore job on this. I'd like an option where in the future it won't require a program to run a restore. Rather a simple mount of the drive will suffice. I believe I can use robocopy just fine, but I'm not sure if it will grab the Windows directory, system files, and full user profiles correctly even with the /ZB option. Options? Is Robocopy /E /ZB /COPYALL /DCOPY:DAT /MT:32 /R:5 /W:5 /LOG:copylog.log the way to go here?

    Read the article

  • Cant kill process on Windows Server 2008!! - Thread in Wait:Executive State

    - by adrian
    I hope someone can help me with our issue we are having. We have a major issue with a process that we can not kill and the only way to get rid of the process is to reboot the machine. I have tried killing it from the normal task manager but no joy. I have tried killing it using the taskkill /F command from a command prompt and no joy. The command reports as sucessful but the process remains. I have tried to start task manager with system rights by calling "psexec -s -i -d taskmgr" and attempting to kill the process but no joy I have tried killing it from Process Explorer but again the process remains. I have tried creating a scheduled task that runs under the SYSTEM name to kill the task but that also does not kill it : schtasks /create /ru system /sc once /st 13:16 /tn test1 /tr "taskkill /F /PID 1576" /it Nothing I do will kill this process. Even logging off and logging back on will not kill this process. Using Process Explorer I notice that there is on stubborn thread that is in the Wait:Executive state. I have tried to kill this thread using Process Explorer but again no joy. We are using Windows Server 2008 R2 64-Bit. The server is brand new and windows is freshly installed. Now heres the thing. We have brought two identical servers from Dell with the same specs and the same OS installed and I can not replicate this issue on the other server. Only on this server, under certain circumstances does this server process hang and can not be restarted! I have also changed the compatability mode by setting it the process to "Windows 2003" but this has not helped. I have noticed in Process Explorer that DEP is turned on but im not sure this has got any bearing on the issue ot not. Please, can someone help??

    Read the article

  • Inactive users in windows server after some time according to first login instead of defining a solid expiration date

    - by smhnaji
    We want to give access to some Windows Server users so they can remotely have access to our server and download from a special folder of the server. The licenses we give to users, are time base. There should be 1 month, 2 month, ..., 1 year, ... licenses. CURRENT SITUATION (WHAT I DON'T WANT): When users are created and added to the OS, a solid expiration date is given. WHAT I WANT: Users' expiration date should be calculated automatically after first login. The user might not need his account right when purchases the license. In another words: When a license of the user we create is purchased at Jan 1st, he should use the license until Feb 1st. No matter whether he really logs in or not. He cannot come Feb 5th and begin using his license because that has expired then. What I want is that when he comes at Feb 5th and begins using, the license update until March 5th. CLARIFICATION (Update after MDMarra's comment) Working environment is Windows Server 2012. By the word 'user', I mean Native Windows Server Users. Whenever a new person purchases a license with me, I create them manually using net user command like this: net user ali pass /add /expires:2013-12-25

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • Ping results "echo'd" out to a text file on Windows XP machine has unusual character rather than the outcome

    - by Richard Rice
    Here is the situation. I have a Windows XP machine that I would like to ping another machine and send the output to a text file for review at a later date. This is quite a standard question with several answers on this website and others. The issue I have is that when reviewing the txt file afterwards, the outcome of the ping appears as a strange character. A screenshot of the text file output can be found at the following link. Please note its the first 8 ping outputs that have a strange character. The %%B was me hoping that would output what I wanted! (Cannot upload image to any hosting websites because the company I work for seems to be afraid of them ....) Here is the code I'm using: @echo off For /f "tokens=1-2 delims=/:" %%b in ("%TIME%") do (set mytime=%%a%%b) PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=*" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) :Ping PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=* skip=2" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) This code works fine on a Windows 7 machine, but not on a Windows XP machine. It appears that the echo command isn't outputting the right data, but I don't understand this enough to correct it. Can anyone spot where I'm going wrong?

    Read the article

  • Is there a simple context-menu add-in that could make-up for the Windows-7 status bar deficiency?

    - by DanO
    Edit: I initially asked about free disk space and selected item size. It has since been pointed out that the selected item size summary is still availiable natively in the details pane. I had read elsewhere (wikipedia) that this was removed along with disk free space, which is not the case. Only free disk space has been completely removed. Selection size is still availiable. Is there a context menu add-in out there that could show the free disk space of the relevant drive, when you right click? This would go a long way to compensating for one of the only steps backward I’ve discovered in Windows 7 so far. I doubt anyone had created one specifially for this need before windows 7 because this information was previously easily accessible in the status bar. I thought about creating one, but it has been a while since I have messed with the Shell API, and I know there are coders out there who could do it faster and better. If you’ve heard of one, or know of something else to make-up for this Microsoft misstep, I’d appreciate hearing about it. If MS were listing to the community they would already have a powertoy or add-in of some kind to un-break this. (they could release it unsupported even), as there seem to be many power users that are extremely annoyed by this feature removal decision. If anyone has seen something, please post it here. As it has been only 4 days since official Windows 7 release, I'll wait at least a week to chose an answer. Here's a picture of protoype screenshot: SU question 19232 is related.

    Read the article

  • "Windows failed to start" loop with 0xc0000225. No install discs, EasyRE/USB iso hasn't worked

    - by mvidaure
    I've been suffering from this "Windows failed to start" loop with 0xc0000225 for 3 days now and I still can't fix it. The major problem is that I don't have any sort of installation disc. However, I have tried EasyRE via both CD and USB but both result in the same problem.  I try to perform an 'Automated Repair' on my computer and I get in red text "The selected partition is corrupted and could not be accessed or repaired. Please select a different drive to continue." It is also labeled as NO under Active. Since I do not have a the installation discs, I made a USB with a Windows_7_Recovery_Disc  iso (as shown here http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html) but it also doesn't work. I get a blue screen that says "RECOVERY You pc needs to be repaired. The application or operating system could not be uploaded because a required file is missing or contains errors... File:\WINDOWS\system32\winload.efi Error code: 0xc0000225 You'll need to use the recovery tools on your installation media. If you don't have any installation media, contact your system administrator or PC manufacturer." Thanks in advance! Miguel

    Read the article

  • How can I restore the registry keys from another C drive? (Windows 7 64bit)

    - by graham3d
    I ran Uniblue registry booster on my system which was working fine. It did a full back up of the registry keys. Now I cannot boot from that disk. I also cannot get into the BIOS! To restore the registry I have to run Uniblue registry booster from within windows. I cannot get there. I can boot up on another C drive, and can see the files on the drive with the problem. Is there any way I can find the Registry Booster backup files and restore it from the other disk? Or find the registry backup and upload it into the registry so I can boot off the other disk again? Or, Can I do a windows repair from the other disk? NB: not getting in to the bios means I cannot boot off the CD/DVD! (I can use the DVD drive from within windows) Any ideas? I do not want to reinstall everything yet again, it takes about 6 hours.

    Read the article

  • WPF application with MS Access database as a data source

    - by Kay Zed
    I have a Microsoft Access 2010 database. Now, using Visual Studio 2010, I want to create a WPF application and add the database as a data source. The app will have a window with a frame that provides navigation through pages. No problem so far. But: -What is the right way to set up the database in this scenario? Tables only? Or must everything go via queries? (VS2010 talks about views which I assume (?) are queries) -Database data must be updatable and records can be added. Some relationships go through link tables (many-to-many) and there are nullable foreign key relationships. Must I take manual steps to make it work? -While adding the data source VS2010 created an xsd from my Access database. I think the xsd might need further tweaking for the application to work the right way. What if I change my Access database design, I'd have to regenerate the xsd again as well. Is this right, and is it the way it is usually done? OR, should I let the original Access database go and give the application the capability to create new empty databases? -How do you provide controls in a page to step through the records in a table? Is there a special database control? -What is the way (WPF class?) to load records into the data context that displays in a page? (At this level it probably does not matter what type of data source it is.)

    Read the article

  • SMO restore of SQL database doesn't overwrite

    - by Tom H.
    I'm trying to restore a database from a backup file using SMO. If the database does not already exist then it works fine. However, if the database already exists then I get no errors, but the database is not overwritten. The "restore" process still takes just as long, so it looks like it's working and doing a restore, but in the end the database has not changed. I'm doing this in Powershell using SMO. The code is a bit long, but I've included it below. You'll notice that I do set $restore.ReplaceDatabase = $true. Also, I use a try-catch block and report on any errors (I hope), but none are returned. Any obvious mistakes? Is it possible that I'm not reporting some error and it's being hidden from me? Thanks for any help or advice that you can give! function Invoke-SqlRestore { param( [string]$backup_file_name, [string]$server_name, [string]$database_name, [switch]$norecovery=$false ) # Get a new connection to the server [Microsoft.SqlServer.Management.Smo.Server]$server = New-SMOconnection -server_name $server_name Write-Host "Starting restore to $database_name on $server_name." Try { $backup_device = New-Object("Microsoft.SqlServer.Management.Smo.BackupDeviceItem") ($backup_file_name, "File") # Get local paths to the Database and Log file locations If ($server.Settings.DefaultFile.Length -eq 0) {$database_path = $server.Information.MasterDBPath } Else { $database_path = $server.Settings.DefaultFile} If ($server.Settings.DefaultLog.Length -eq 0 ) {$database_log_path = $server.Information.MasterDBLogPath } Else { $database_log_path = $server.Settings.DefaultLog} # Load up the Restore object settings $restore = New-Object Microsoft.SqlServer.Management.Smo.Restore $restore.Action = 'Database' $restore.Database = $database_name $restore.ReplaceDatabase = $true if ($norecovery.IsPresent) { $restore.NoRecovery = $true } Else { $restore.Norecovery = $false } $restore.Devices.Add($backup_device) # Get information from the backup file $restore_details = $restore.ReadBackupHeader($server) $data_files = $restore.ReadFileList($server) # Restore all backup files ForEach ($data_row in $data_files) { $logical_name = $data_row.LogicalName $physical_name = Get-FileName -path $data_row.PhysicalName $restore_data = New-Object("Microsoft.SqlServer.Management.Smo.RelocateFile") $restore_data.LogicalFileName = $logical_name if ($data_row.Type -eq "D") { # Restore Data file $restore_data.PhysicalFileName = $database_path + "\" + $physical_name } Else { # Restore Log file $restore_data.PhysicalFileName = $database_log_path + "\" + $physical_name } [Void]$restore.RelocateFiles.Add($restore_data) } $restore.SqlRestore($server) # If there are two files, assume the next is a Log if ($restore_details.Rows.Count -gt 1) { $restore.Action = [Microsoft.SqlServer.Management.Smo.RestoreActionType]::Log $restore.FileNumber = 2 $restore.SqlRestore($server) } } Catch { $ex = $_.Exception Write-Output $ex.message $ex = $ex.InnerException while ($ex.InnerException) { Write-Output $ex.InnerException.message $ex = $ex.InnerException } Throw $ex } Finally { $server.ConnectionContext.Disconnect() } Write-Host "Restore ended without any errors." }

    Read the article

  • Database structure and source control - best practice

    - by Paddy
    Background I came from several years working in a company where all the database objects were stored in source control, one file per object. We had a list of all the objects that was maintained when new items were added (to allow us to have scripts run in order and handle dependencies) and a VB script that ran to create one big script for running against the database. All the tables were 'create if not exists' and all the SP's etc. were drop and recreate. Up to the present and I am now working in a place where the database is the master and there is no source control for DB objects, but we do use redgate's tools for updating our production database (SQL compare), which is very handy, and requires little work. Question How do you handle your DB objects? I like to have them under source control (and, as we're using GIT, I'd like to be able to handle merge conflicts in the scripts, rather than the DB), but I'm going to be pressed to get past the ease of using SQL compare to update the database. I don't really want to have us updating scripts in GIT and then using SQL compare to update the production database from our DEV DB, as I'd rather have 'one version of the truth', but I don't really want to get into re-writing a custom bit of software to bundle the whole lot of scripts together. I think that visual studio database edition may do something similar to this, but I'm not sure if we will have the budget for it. I'm sure that this has been asked to death, but I can't find anything that seems to quite have the answer I'm looking for. Similar to this, but not quite the same: http://stackoverflow.com/questions/340614/what-are-the-best-practices-for-database-scripts-under-code-control

    Read the article

  • Which Database to choose?

    - by Sundar
    I have the following criteria Database should be protected with a username and password. It should not be possible to copy the database file and use it else were like MS Access. There will be no central database server. Each machine will run their own database server locally and user will initiate synchronization. Concept is inspired from distributed version control system like Git. So it should have good replication support. Strong consistency is not needed. Users will synchronize each other database when they need. In case of conflicts it should be possible to find the conflict and present it (from application) to the user for fixing it. Revisions of data if available it will be good. e.g. Entire history of change to a invoice. I explored document oriented database and inclined towards the same. But I dont know what to choose. Database is small it will not reach even 1GB in the next few years (say 3 years). Please feel free to suggest any database which you think might be suitable. Any pointers is highly appreciated. Thanks in advance.

    Read the article

  • How to configure database connection securely

    - by chiccodoro
    Similar but not the same: How to securely store database connection details Securely connecting to database within a application Hi all, I have a C# WinForms application connecting to a database server. The database connection string, including a generic user/pass, is placed in a NHibernate configuration file, which lies in the same directory as the exe file. Now I have this issue: The user that runs the application should not get to know the username/password of the general database user because I don't want him to rummage around in the database directly. Alternatively I could hardcode the connection string, which is bad because the administrator must be able to change it if the database is moved or if he wants to switch between dev/test/prod environments. So long I've found three possibilities: The first referenced question was generally answered by making the file only readable for the user that runs the application. But that's not not enough in my case (the user running the application is a person. The database user/pass are general and shouldn't even be accessible by the person.) The first answer additionally proposed to encrypt the connection data before writing it to the file. With this approach, the administrator is not able anymore to configure the connection string because he cannot encrypt it by hand. The second referenced question provides an approach for this very scenario but it seems very complicated. My questions to you: This is a very general issue, so isn't there any general "how-to-do-it" way, somehow a "design pattern"? Is there some support in .NET's config infrastructure? (optional, maybe out of scope) Can I combine that easily with the NHibernate configuration mechanism?

    Read the article

  • Database for Python Twisted

    - by Will
    There's an API for Twisted apps to talk to a database in a scalable way: twisted.enterprise.dbapi The confusing thing is, which database to pick? The database will have a Twisted app that is mostly making inserts and updates and relatively few selects, and then other strictly-read-only clients that are accessing the database directly making selects. (The read-only users are not necessarily selecting the data that the Twisted app is inserting; its not as though the database is being used as a message-queue) My understanding - which I'd like corrected/adviced - is that: Postgres is a great DB, but all the Python bindings - and there is a confusing maze of them - are abandonware There is psycopg2, but that makes a lot of noise about doing its own connection-pooling and things; does this co-exist gracefully/usefully/transparently with the Twisted async database connection pooling and such? SQLLite is a great database for little things but if used in a multi-user way it does whole-database locking, so performance would suck in the usage pattern I envisage MySQL - after the Oracle takeover, who'd want to adopt it now or adopt a fork? Is there anything else out there?

    Read the article

  • SQL Server Database In Single User Mode after Failover

    - by jlichauc
    Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

    Read the article

  • how do i implement / build / create an 'in memory database' for my unit test

    - by Michel
    Hi all, i've started unit testing a while ago and as turned out i did more regression testing than unit testing because i also included my database layer thus going to the database verytime. So, implemented Unity to inject a fake database layer, but i of course want to store some data, and the main opinion was: "create an in-memory database" But what is that / how do i implement that? Main question is: i think i have to fake the database layer, but doesn't that make me create a 'simple database' myself or: how can i keep it simple and not rebuilding Sql Server just for my unit tests :) At the end of this question i'll give an explanation of the situation i got in on the project i just started on, and i was wondering if this was the way to go. Michel Current situation i've seen at this client is that testdata is contained in XML files, and there is a 'fake' database layer that connects all the xml files together. For the real database we're using the entity framework, and this works very simple. And now, in the 'fake' layer, i have top create all kind of classes to load, save, persist etc. the data. It sounds weird that there is so much work in the fake layer, and so little in the real layer. I hope this all makes sense :)

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >