Search Results

Search found 8850 results on 354 pages for 'windowx xp'.

Page 160/354 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Recommended boot partition size for Windows 7

  - by dwj

  I started using One Big Partition for everything and separating data out with folders when I got my current computer years ago. I'm preparing to upgrade my system from Windows XP to Windows 7 and I thought I might go back to putting my data on a separate partition. Most likely I'll just use the default OS install. My current Program Files tree has ~16 GB of stuff. Thinking ahead though, I've had XP installed for years. Who knows what apps I'm going to install down the line? This, of course, begs the question: How big do I make my Windows 7 install partition?

  Read the article

• How to install on Windows Server 2008, an application that is not natively supported, but not use co

  - by t3

  I have an application to install on Windows Server 2008, which is not natively supported by the installer. The application installer permits installation on Windows Vista(or XP, or 7). I do not want to use compatibility mode; even if I did it doesn't work. So, how can I spoof the installer to believe it is Windows Vista(or XP, or 7) so that it can proceed with the installation? Notes: This is an experimental machine, so I am not concerned about stability of the host or the application.

  Read the article

• Data Recovery needed with a Sector Zero problem on a HDD

  - by Jay Robins

  Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

  Read the article

• Fedora12 Slow USB 2.0 Write Speed, ehci_hcd module is missing

  - by MA1

  I am using Fedora 12, the problem I am facing is USB 2.0 write speed. I have a dual boot system with Windows XP and Fedora 12. USB 2.0 write speed in Windows XP is much faster then what I am getting in Fedora 12. After searching Google I came to know that ehci_hcd module is missing/not present in my system. ehci_hcd module is neither loaded nor it is present in the available list of modules. Can someone guide me how to fix this issue? Does ehci_hcd have something to do with USB 2.0 write speed? Do I have to recompile the kernel and add/enable the ehci_hcd module?

  Read the article

• Unable to access Windows 7 shared folder with Windows 98

  - by PabloG

  I'm unable to access a Windows 7 (Windows 7 Pro 64-bit) shared folder from an old Windows 98 box: I tried with: Turning on file and printer sharing Turning on public folder sharing Turning off password protected sharing Sharing the folder with read permissions to Everyone Lowering the encryption to 40-56 bits. The shared folder works fine using it from Windows XP, and even from Linux with CIFS / Samba, but when I try to use it from Win98 with: NET USE X: \\SERVER\SHARE an user / password dialog pops up. I entered the administrator's user / password from my Windows 7 box, but it doesn't work (incorrect password). The same Win98 machine works fine accessing a Windows XP shared folder, so it looks like a Windows 7 networking issue. Any ideas?

  Read the article

• Toshiba monitor not displaying anything

  - by MirroredFate

  Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

  Read the article

• Windows OEM vs retail difference

  - by tjameson

  My laptop has an OEM version of Vista Home Premium 32-bit. I need to reinstall Windows, and I've made sure that disk I have downloaded is the same as the one on my system (32-bit Home Premium). Is the retail version the same as the OEM? I only have a retail copy but I have an OEM license. Will I have any problems reactivating my copy of windows? Note, my HW hasn't changed. Note: I saw this post already, but I don't have an OEM disk: Installing XP with out manufacturers original XP restore disk, possiable with OEM disk?

  Read the article

• Why is VMware vSphere Client hanging at the console?

  - by David

  When I use the vSphere Client (against an ESXi 4.1 server) it hangs a lot. It's always at the same place - using the console on a VM. The console stops responding - and a lot of times, the management window stops responding as well. The operating system won't close the window (as the application isn't responding) and requires a force close. I've had the console refuse to give up the mouse, and have had the console freeze with the cursor in the top left (before any VM software starts, maybe?). The environment is this: the system is a Dell laptop running Ubuntu 10.10 (Maverick) fully updated with VirtualBox OSE running Windows XP (also fully updated). The vSphere Client is running in the Windows XP VM. Got all that? How do I keep these hangs from happening? It is very aggravating. I'm still trying just to get the VM loaded with Ubuntu Server...

  Read the article

• Legacy VB6 application under Win7 SQL error

  - by Shial

  We have a rather unfortunate legacy application at work, written originally in VB6 it predates anybody in our IT department by at least 5 years. We have a contracted developer for ongoing maintenance and where he can he rewrites sections over into .NET code (Not sure about his techniques here, this is a side job for his regular work as an IBM engineer) the application works fine (such as it is) under windows XP. We have only a couple of Windows 7 machines mainly for testing and this application seems to run into a wall. Things like the background not loading and SQL errors. This is even running under administrator. Running an SQL trace from the ODBC control panel shows several interesting things. It makes a connection to the database successfully initially where it runs a query to determine if it is running the correct version. This query works fine. 558-1af0 ENTER SQLExecDirectW HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 BMS 558-1af0 EXIT SQLExecDirectW with return code 1 (SQL_SUCCESS_WITH_INFO) HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 It then seems to drop its connection and can't find the ODBC connection despite the fact its connecting to the same DB. From the trace it looks like it configures the connection then it starts firing off SQLFreeStmt to unbind and close out then when in the application and it tries to do its thing there is no connection. 558-1af0 ENTER SQLFreeStmt HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> BMS 558-1af0 EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS) HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> Then this happens when I try to do something that pulls data 558-1af0 ENTER SQLDriverConnectW HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> BMS 558-1af0 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR) HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> DIAG [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (0) Nearly all of my searching on this issue comes up with programming issues where the connection string has a problem. The only thing that is different in this particular scenario though is Windows 7, I know the connection string is fine since it works on the XP machines. The VB components are supposed to be still functional under Win7. My computer is running 32 bit win7 and my VP is running Win7 64 bit and both have the same problem so that can be ruled out. I have already tried reinstalling the SQL Native Client and the VB runtime as well as the application in question. Hopefully I can find a solution and not have to resort to using the XP VM.

  Read the article

• How can I shrink the Address toolbar in the Task Bar?

  - by Iszi

  I like being able to run commands straight from my Task Bar. So, I've enabled the Address toolbar on my new Windows 7 system - just like I had on my old XP system. However, the bar seems to have a mandatory minimum length that's a bit longer than I'd prefer. It's about twice as long, if memory serves, as the minimum size allowed in XP. Is there any way I can adjust this minimum length, through a Registry key or some other means? (Note: I've also got a related question, about removing the Refresh button at the end of the bar.) EDIT: For clarity, I'm adding a screenshot. The toolbar I want to shorten is the one circled below, with an empty text-entry field that has a drop-down and "Refresh" button. I currently have it positioned between a Quick Launch toolbar and the Taskbar. On the far side of the Taskbar, before the System Tray, is a Desktop toolbar.

  Read the article

• unable to access shared drives n win7

  - by colin

  OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

  Read the article

• Windows 7 Printing to a network printer

  - by JohnyV

  We have a 2008 server as our print server. Clients that use windows xp with a logon script to map have no problems printing. When I test printing to a network printer on a windows 7 machine it works fine up to a few machines as soon As i get 12-15 workstations trying to print, when they log in they get the yellow exclamation mark and needs troubleshooting against the printer name. It is being deploy by group policy. I have tried to deploy it by group policy also by group policy preferences and by using a script and i get the same error whatever i try. Does anyone have any suggestions to try and troubleshoot? Once again Windows xp clients have no issues printing at all. It is only windows 7 clients. Thanks

  Read the article

• Can VMWare Workstation 7.x and Sun VirtualBox 3.1.x co-exist on the same Windows 7 64bit Host togeth

  - by Heston T. Holtmann

  Will installing Sun Virtual Box bash or interfere with my VMWare installtion? I don't need to run VMs from both Virtual-Machine software packages at the same time but I do need to run some older Virtual-Machines from Sun-Virtualbox on the same 64-bit Windows 7 host until I can migrate those VMs to VMWare. Before switching from Linux host to Windows host, I ensured to export the VirtualBox VM to an OVF "appliance" with intentions of importing into VMWare Workstation 7. But VMWare gives me an error stating it can't import it. Background info My old workstation host: 32-bit Ubuntu 9.04 running Sun Virtual Box 3.x hosting Windows-XP VM Guest for Windows Software app development (VS2008, etc) Needs I need to get my original Sun-VBox Windows-XP Guest running on my new Windows 7 Workstation either imported into VMWare or running on the Windows version of Sun-Virtual box (I have the VM-Guest Backed up and copied to the new computer data drive. New workstation host: 64bit Windows 7 running VMWare Workstation 7 to host 32bit Ubuntu 9.10 for linux project work.

  Read the article

• Synergy client drops and reconnects at UAC dialog

  - by sidran32

  I've been using Synergy for a while at work to connect my XP machine (the host) to my Win 7 laptop (the client). I previously was having issues with using Synergy and the UAC prompt, as described in this question, and have had no issues since, until recently. I upgraded to Synergy 1.4.10 and now am seeing odd behavior whenever a UAC prompt appears on my laptop. When the UAC prompt appears on my laptop, Synergy momentarily drops its connection to my laptop, causing my mouse and keyboard focus to revert to my host machine (the XP machine). After about a second or so, though, the connection gets re-established and I am able to type and use the mouse buttons in the UAC prompt. Once the prompt clears, the connection drops again for a second, and then gets re-established again. Is this something to do with configuration or perhaps should I just chalk it up to a change in behavior in version 1.4.10?

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• Cannot open SQL 2005 database in SQL server Management Studio 2008 R2 on Windows 7

  - by Darryl Lawrence

  I have Windows 7 64bit as my OS + SQL Server 2008 R2 installed. I can connect to SQL Databases (2008), but cannot connect to a SQL 2005 database. I can, however, connect to the 2005 SQL Database on a PC that has Windows XP as the OS and also has SQL Server 2008 R2 installed. So it seems that it works fine on XP but not on Windows 7 (32 or 64bit). is this an Operating System issue? Error message: Cannot connect to OMRSQLV016\PRODSQL002. =================================== A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 Error Number: -1 Severity: 20 State: 0

  Read the article

• How do I disable the track-change popup in the WMP11 mini-bar?

  - by McBainUK

  How do I disable the track-change popup in the WMP11 mini-bar? (Windows XP if it makes a difference)

  Read the article

• Why ping another innet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• Computer is really slow

  - by joshhunt

  I'm not exactly sure when exactly it started happening, but my computer now is extremely slow. Originally, I have been using this computer for all sorts of stuff: Photoshop, web design/development, movies and even some light (Warcraft 3) gaming. I have been running it with Windows XP But now it is very, very slow, and I don't know how, why or when this happened. After I noticed the slowness, I removed Windows XP and installed Windows 7 on it, but it is still very slow. Now watching videos is unbearable at full screen (slow frame rates, audio out of sync) and painful when made smaller. Why would this happen? What would cause this? I am starting to think it is a hardware problem (the CPU has died or something), but I don't even know if that is possible. The PC is running with 1GB of RAM, three hard drives (all up, something like 400 GB) and I think a 1.6GHz processor

  Read the article

• Determine/resolve filepath/alias of a certain command in the Windows command prompt

  - by porg

  How can I find out to which filepath (or alias) a certain command input will point to, in the Windows command prompt? Specifically Windows XP, info on other versions also appreciated! On Unix systems I simply use: $ which commandname /a/commandname Or: $ type -a commandname commandname is aliased to `/b/commandname' commandname is /a/commandname commandname is /b/commandname And I am simply looking for the equivalent in the Windows Shell (specifically Win XP). I came to this general question, from a specific issue: I had installed robocopy.exe (version 026), but the command line "robocopy" always triggers version 010, and I would like to determine where this command points to, in order to correct this mistake.

  Read the article

• Unable to launch google.com inside Linux Ubuntu

  - by Anuradha

  I have installed Ubuntu Linux VM in my Win XP box. I am able to open http://google.com on Win XP but when I login to, ubuntu linux.. and launch this site: I am getting an error: Server not found. The network settings I have on LinuxUbuntu VM is : Adapter1 : attached to Bridge adapter. I tried NAT as well. But nothing seems to work. I am not in China. I provide google.com as mere example. We have a test website which cannot be launched inside Linux Ubuntu.

  Read the article

• X Session from Mac

  - by tekknolagi

  How can I log into an X server from Mac OS X? I know that ssh -X username@host will log me in and I will have the capability to run X applications. On Cygwin/X you can log in and have a whole X session from your computer... and it will look something like this: How can I replicate this? Using this batch script: @echo off SET DISPLAY=127.0.0.1:0.0 SET REMOTE_HOST=%1 IF "%REMOTE_HOST%" == "" SET REMOTE_HOST=10.0.0.1 SET CYGWIN_ROOT=\cygwin SET RUN=%CYGWIN_ROOT%\bin\run -p /usr/bin SET PATH=.;%CYGWIN_ROOT%\bin;%PATH% SET XAPPLRESDIR= SET XCMSDB= SET XKEYSYMDB= SET XNLSPATH= if not exist %CYGWIN_ROOT%\tmp\.X11-unix\X0 goto CLEANUP-FINISH attrib -s %CYGWIN_ROOT%\tmp\.X11-unix\X0 del %CYGWIN_ROOT%\tmp\.X11-unix\X0 :CLEANUP-FINISH if exist %CYGWIN_ROOT%\tmp\.X11-unix rmdir %CYGWIN_ROOT%\tmp\.X11-unix if "%OS%" == "Windows_NT" goto OS_NT echo startxdmcp.bat - Starting on Windows 95/98/Me goto STARTUP :OS_NT REM Windows NT/2000/XP echo startxdmcp.bat - Starting on Windows NT/2000/XP :STARTUP %RUN% XWin -query tekknolagi.dyndns.org -clipboard -lesspointer -scrollbars -screen 0 1050x1655@2 -screen 1 1680x985@1

  Read the article

• What software can copy the whole hard drive with Operating System to DVD-R, and be able to "refresh

  - by Jian Lin

  What software can take a snapshot of a Win XP or Win 7 machine -- burning all files into a DVD-R, and then be able to boot from that DVD-R can restore the whole machine back to that state stored inside the DVD-R? Maybe for Win XP, it is easier as the OS can be just 1 or 2GB on the hard drive, but for Win 7, a fresh installation is already 16GB on the hard drive, so it will need several DVD-R to take the snapshot? thanks. (any of these software are open source?)

  Read the article

• how to stream audio and video files, but use any media player on Windows (without using Windows file

  - by RamyenHead

  I want to access and play media files on machine S (Windows XP) from machine C (Windows XP). Using Windows File Sharing ("share this folder" stuff), if it works, I would share the folder containing media files on machine S, and I would be able to play media files, sitting in front of C, using any media player I want. Windows somehow ensures that the remote files behave like local files. But Windows file sharing won't work for me, is there any alternative? If two machines were both Linux, I would install an SSH server on S and use Nautilus from C to access and play media files. The reason why I can't use Windows file sharing is, my campus use two different subnets, I have S and C on different subnets and it seems that the firewall governing the whole network in campus doesn't allow file sharing between different subnets. I tried changing Windows Firewall settings on S to allow C in, it still wouldn't work, so it must be the other firewall.

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >