Search Results

Search found 19350 results on 774 pages for 'address book'.

Page 161/774 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• PHP form validation question?

  - by GeNx

  Is it necessary to validate a name or street address? when I have it coded in the following format. And if so why? $address = mysqli_real_escape_string($mysqli, htmlentities($_POST['address'])); $name = mysqli_real_escape_string($mysqli, htmlentities($_POST['name']));

  Read the article

• replace a whole page useing GreaseMonkey

  - by RYan

  is there a way to replace a whole web page using GreaseMonkey? basically a redirection but the address bar still shows the original address. i want the original address to show, but i want to load a modified web page from my hard drive without anyone knowing. thanks

  Read the article

• Cluster failover and strange gratuitous arp behavior

  - by lazerpld

  I am experiencing a strange Windows 2008R2 cluster related issue that is bothering me. I feel that I have come close as to what the issue is, but still don't fully understand what is happening. I have a two node exchange 2007 cluster running on two 2008R2 servers. The exchange cluster application works fine when running on the "primary" cluster node. The problem occurs when failing over the cluster ressource to the secondary node. When failing over the cluster to the "secondary" node, which for instance is on the same subnet as the "primary", the failover initially works ok and the cluster ressource continues to work for a couple of minutes on the new node. Which means that the recieving node does send out a gratuitous arp reply packet that updated the arp tables on the network. But after x amount of time (typically within 5 minutes time) something updates the arp-tables again because all of a sudden the cluster service does not answer to pings. So basically I start a ping to the exchange cluster address when its running on the "primary node". It works just great. I failover the cluster ressource group to the "secondary node" and I only have loss of one ping which is acceptable. The cluster ressource still answers for some time after being failed over and all of a sudden the ping starts timing out. This is telling me that the arp table initially is updated by the secondary node, but then something (which I haven't found out yet) wrongfully updates it again, probably with the primary node's MAC. Why does this happen - has anyone experienced the same problem? The cluster is NOT running NLB and the problem stops immidiately after failing over back to the primary node where there are no problems. Each node is using NIC teaming (intel) with ALB. Each node is on the same subnet and has gateway and so on entered correctly as far as I am concerned. Edit: I was wondering if it could be related to network binding order maybe? Because I have noticed that the only difference I can see from node to node is when showing the local arp table. On the "primary" node the arp table is generated on the cluster address as the source. While on the "secondary" its generated from the nodes own network card. Any input on this? Edit: Ok here is the connection layout. Cluster address: A.B.6.208/25 Exchange application address: A.B.6.212/25 Node A: 3 physical nics. Two teamed using intels teaming with the address A.B.6.210/25 called public The last one used for cluster traffic called private with 10.0.0.138/24 Node B: 3 physical nics. Two teamed using intels teaming with the address A.B.6.211/25 called public The last one used for cluster traffic called private with 10.0.0.139/24 Each node sits in a seperate datacenter connected together. End switches being cisco in DC1 and NEXUS 5000/2000 in DC2. Edit: I have been testing a little more. I have now created an empty application on the same cluster, and given it another ip address on the same subnet as the exchange application. After failing this empty application over, I see the exact same problem occuring. After one or two minutes clients on other subnets cannot ping the virtual ip of the application. But while clients on other subnets cannot, another server from another cluster on the same subnet has no trouble pinging. But if i then make another failover to the original state, then the situation is the opposite. So now clients on same subnet cannot, and on other they can. We have another cluster set up the same way and on the same subnet, with the same intel network cards, the same drivers and same teaming settings. Here we are not seeing this. So its somewhat confusing. Edit: OK done some more research. Removed the NIC teaming of the secondary node, since it didnt work anyway. After some standard problems following that, I finally managed to get it up and running again with the old NIC teaming settings on one single physical network card. Now I am not able to reproduce the problem described above. So it is somehow related to the teaming - maybe some kind of bug? Edit: Did some more failing over without being able to make it fail. So removing the NIC team looks like it was a workaround. Now I tried to reestablish the intel NIC teaming with ALB (as it was before) and i still cannot make it fail. This is annoying due to the fact that now i actually cannot pinpoint the root of the problem. Now it just seems to be some kind of MS/intel hick-up - which is hard to accept because what if the problem reoccurs in 14 days? There is a strange thing that happened though. After recreating the NIC team I was not able to rename the team to "PUBLIC" which the old team was called. So something has not been cleaned up in windows - although the server HAS been restarted! Edit: OK after restablishing the ALB teaming the error came back. So I am now going to do some thorough testing and i will get back with my observations. One thing is for sure. It is related to Intel 82575EB NICS, ALB and Gratuitous Arp.

  Read the article

• Why should we have soap location in WSDL ?

  - by Alexis

  Hello, Is soap:address/ or soap:address location=uri / best pratice for spring WS ? Regards,

  Read the article

• what are the best concert-ticket systems? comercial and open source

  - by helle

  can anybody recommend (of developers-opinion) such systems, where you can book tickets for concerts, conferences, etc. one should be able to book a seat as well, and it shell do the debitcard stuff, and has a good interface for accounting. I am looking for an open source solution, but I am also interested in commercial ones, to have a comparison of features and prices, etc. thanks for everybodys suggestions - pros and cons to it are very wellcome ;) well, it shouldn't has a flash component multi languages :) would be great an extra mobile-view is preferred the extra extra bonus for such a system would be a very good wordpress compatibility p.s. sorry for my english well ... I already googled a lot. But I found so very many, that I hope you could help me to find a good choice, to have a base from where I can do a further lookup. and for sure :) What are the things you I have to have in mind. What brings troubles, what brings costs?

  Read the article

• How to show an "or includes" relationship - UML Use case diagram

  - by TheNewBlack

  I haven't come across this issue before and can't find it in my Schaum's Outline UML book and was wondering if someone here could help. I'm making a use case diagram for e-commerce, and in it I want to describe that in order to add a book to your shopping basket, you have to either search products (using the websites search engine) or browse products (using navigation). But the thing is that it can be either one, and not both. Is there a way to show that adding a product to the basket needs to include either this or that? Because otherwise it would look like it needs to include both. Or should I join the two use cases (search products and browse products) into one?

  Read the article

• Beginning android games, 2nd edition engine

  - by Benjamin Stephen

  I recently bought the book from Apress and have worked my way through it, unfortunately, it seems to just be dealing with side scrolling games and not Zelda-like top down games. I was wondering if anyone out there can tell me if it's possible to use their engine to create such a game? It doesn't go into how to build a top down tile map. Using the engine in their book, how can I make a tile map easily that has walls and things like that? Any help would be appreciated. Thanks in advance.

  Read the article

• Outlying DBAs

  - by steveh99999

  Read an interesting book recently, ‘Outliers – the story of success’ by Malcolm Gladwell. There’s a good synopsis of the book here on wikipedia. I don’t want to write in detailed review of the book, but it’s well worth a read. There were a couple of sections which I thought were possibly relevant to IT professionals and DBAs in particular. Firstly, ‘the 10,000 hour rule’, in this section Gladwell asserts that to be a real ‘elite performer’ takes 10,000 hours of practice. ‘Practice isn’t the thing you do once you’re good, it’s the thing you do that makes you good’.  He gives many interesting examples – the Beatles, Bill Gates etc – but I was wondering could this be applied to DBAs ? If it takes 10,000 hours to be a really elite DBA – how long does that really take ? 8 hours a day makes 1250 days. If we assume that most DBAs work around 230 days a year – then it takes around 5 and a half years to become an elite DBA.   But how much time per day does a DBA spend actually doing DBA work ? Certainly it’s my experience that the more experienced I get as a DBA, the less time I seem to spend actually doing DBA work – ie meetings, change-control meetings, project planning, liasing with other teams, appraisals etc.  Is it more accurate to assume that a DBA spends half their time actually doing ‘real’ DBA work – or is that just my bad luck ?   So, in reality, I’d argue it can take at least 5 1/2 and more likely closer to 10 years to become an elite DBA. Why do I keep receiving CVs for senior DBAs with 2-4 years actual DBA experience ? In the second section I found particularly interesting, Gladwell writes about analysis of plane crashes and the importance of in-cockpit communications. He describes a couple of crashes involving Korean Airlines – where co-pilots were often deferrential to pilots, and unwilling to openly criticise their more senior colleagues or point out errors when things were going badly wrong… There’s a better summary of Gladwell’s concepts on mitigation  here – but to apply this to a DBA role… If you are a DBA and you do not agree with  a decision of one of your superiors, then it’s your duty as a DBA to say what you think is wrong, before it’s too late…  Obviously there’s a fine line between constructive criticism and moaning, but a good senior DBA or manager should be able to take well-researched criticism\debate from a more junior DBA.   Is this really possible ?

  Read the article

• Javascript Rookie Question: Define Variables Inline

  - by Dylan Kinnett

  I'm proficient with HTML and CSS but I'm still pretty shaky when it comes to Javascript. That said, I've been able to build a site using the Internet Archive Book Reader, which relies on reader.js Here's a copy of one of my versions of reader.js https://gist.github.com/dylan-k/ed4efed2384e221d46cc It's a good site, but I find I have to repeat things a lot. Basically, I have one copy of reader.js for every page/book featured on the site. It seems there must be a better way. I re-use the script, making copies, just so that I can change lines 28, 80, 83, 84. Is there a way I could include just one copy of reader.js and then use a <script> tag to define these 4 lines for the individual pages?

  Read the article

• Google Local Search API

  - by Gublooo

  hey guys couple of quick questions 1) In the local search results - we can get a lot of parameters like street title, address, city, state, lat, long , url etc - In order for me to uniquely identify this record - can I consider URL to be unique to this address or concatenation of latitude and longitude Ref: http://code.google.com/apis/ajaxsearch/documentation/reference.html#_class_GlocalResult 2) In terms of usage, depending upon what user enters, I'm displaying a list of local business for the user to choose. Now when a user selects a particular business address - is it legal for me to store that business address along with lat and longitude information in my database for future look ups. I've seen a lot of blogs talking about storing the lat/long info but just want to be sure that i'm not violating and google rules. Thanks

  Read the article

• How to get information from objdump

  - by Summer_More_More_Tea

  I encounter a problem when reading information dumped out from an executable file in linux. The information is as follows: 804a0ea: 04 08 add $0x8, %al ... 804a0f4: a6 cmpsb %es:(%edi),%ds:(%esi) I have two questions: what does the address 804a0ea and 804a0f4 mean? the virtual address in the process's address space? what does the ... mean? how can I get instruction at address 804a0f0? Thanks in advance.

  Read the article

• What is the Difference between GC.GetTotalMemory(false) and GC.GetTotalMemory(true)

  - by somaraj

  Hi, Could some one tell me the difference between GC.GetTotalMemory(false) and GC.GetTotalMemory(true); I have a small program and when i compared the results the first loop gives an put put < loop count 0 Diff = 32 for GC.GetTotalMemory(true); and < loop count 0 Diff = 0 for GC.GetTotalMemory(false); but shouldnt it be the otherway ? Smilarly rest of the loops prints some numbers ,which are different for both case. what does this number indicate .why is it changing as the loop increase. struct Address { public string Streat; } class Details { public string Name ; public Address address = new Address(); } class emp :IDisposable { public Details objb = new Details(); bool disposed = false; #region IDisposable Members public void Dispose() { Disposing(true); } void Disposing(bool disposing) { if (!disposed) disposed = disposing; objb = null; GC.SuppressFinalize(this); } #endregion } class Program { static void Main(string[] args) { long size1 = GC.GetTotalMemory(false); emp empobj = null; for (int i = 0; i < 200;i++ ) { // using (empobj = new emp()) //------- (1) { empobj = new emp(); //------- (2) empobj.objb.Name = "ssssssssssssssssss"; empobj.objb.address.Streat = "asdfasdfasdfasdf"; } long size2 = GC.GetTotalMemory(false); Console.WriteLine( "loop count " +i + " Diff = " +(size2-size1)); } } } }

  Read the article

• Dns caching for sockets

  - by Poma

  I'm connecting to some websites through socks proxy server. In my case its very good to implement dns cache, so proxy don't need to resolve website's ip address. So, I performed DNS lookup, but don't know where to supply IP address. mySocket.Connect uses proxy's ip address so it isn't right place. I tried to place it in http header GET http://11.22.33.44/index.html HTTP/1.1 - this doesn't work (even in browser) since website is on virtual hosting. It seems that Host header is right place for resolved ip address. Am I right? Will proxy resolve host name (since it's still there in GET header) or not?

  Read the article

• Retrieve Records from paypal csv file

  - by Pankaj Khurana

  Hi, I want to retrieve all the records from paypal csv file where type='Payment Processed' and store it in a database table.It should be available in the following format: 'Heading':'Value' The format of the csv is: "Transaction ID","Reference Transaction ID","Date","Type","Subject","Item Number","Item Name","Invoice ID","Name","Email","Shipping Name","Shipping Address Line 1","Shipping Address Line 2","Shipping Address City","Shipping State/Province","Shipping Zip/Postal Code","Shipping Address Country","Shipping Method","Address Status","Contact Phone Number","Gross Amount","Receipt ID","Custom Field","Option 1 Name","Option 1 Value","Option 2 Name","Option 2 Value","Note","Auction Site","Auction User ID","Item URL","Auction Closing Date","Insurance Amount","Currency","Fees","Net Amount","Shipping & Handling Amount","Sales Tax Amount","To Email","Time","Time Zone" "1T","",5/5/2010 2:10:44 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User1","[email protected]","","","","","","","","","N","","68.18","R1","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","01:40","Asia/Calcutta" "2T","",5/19/2010 4:04:08 PM,"Payment Processed","CFP Self Study Kit","1","CFP Self Study Kit","","User2","[email protected]","","","","","","","","","N","","68.18","R2","","","","","","","","","",,"","USD","-2.62","65.56","0","0","[email protected]","03:34","Asia/Calcutta" "3T","1RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","17492.6","","","","","","","","","","",,"","INR","0","17492.6","0","0","","04:58","Asia/Calcutta" "4T","2RT",5/19/2010 5:28:45 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-393.36","","","","","","","","","","",,"","USD","0","-393.36","0","0","","04:58","Asia/Calcutta" "5T","",5/19/2010 5:28:45 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","04:58","Asia/Calcutta" "6T","",5/20/2010 5:38:02 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-17492.6","","","","","","","","","","",,"","INR","0","-17492.6","0","0","","05:08","Asia/Calcutta" "7T","",5/21/2010 12:32:37 PM,"Payment Processed","FP - LVC Plus","","FP - LVC Plus","","User3","[email protected]","User3","NEW DELHI","BEHIND KARNATAKA BANK LD","SOUTH","NEW DELHI","110023","IN","","N","","283.96","","","","","","","","","","",,"","USD","-9.95","274.01","0","0","[email protected]","00:02","Asia/Calcutta" "8T","",5/25/2010 4:40:48 PM,"Transfer to Bank Initiated","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:10","Asia/Calcutta" "9T","3RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","-274.01","","","","","","","","","","",,"","USD","0","-274.01","0","0","","04:10","Asia/Calcutta" "10T","4RT",5/25/2010 4:40:48 PM,"Currency Conversion Completed","","","",""," ","","","","","","","","","","N","","12569.85","","","","","","","","","","",,"","INR","0","12569.85","0","0","","04:10","Asia/Calcutta" "11T","",5/26/2010 4:57:39 PM,"Transfer to Bank Completed","P1006","","P1006",""," ","","","","","","","","","","N","","-12569.85","","","","","","","","","","",,"","INR","0","-12569.85","0","0","","04:27","Asia/Calcutta" "Total","-247.05 USD","-15.19","-262.24" "Total","0.00 INR","0.00","0.00" Please help me on this Thanks

  Read the article

• Pace Layering Comes Alive

  - by Tanu Sood

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Rick Beers is Senior Director of Product Management for Oracle Fusion Middleware. Prior to joining Oracle, Rick held a variety of executive operational positions at Corning, Inc. and Bausch & Lomb. With a professional background that includes senior management positions in manufacturing, supply chain and information technology, Rick brings a unique set of experiences to cover the impact that technology can have on business models, processes and organizations. Rick hosts the IT Leaders Editorial on a monthly basis. By now, readers of this column are quite familiar with Oracle AppAdvantage, a unified framework of middleware technologies, infrastructure and applications utilizing a pace layered approach to enterprise systems platforms. 1. Standardize and Consolidate core Enterprise Applications by removing invasive customizations, costly workarounds and the complexity that multiple instances creates. 2. Move business specific processes and applications to the Differentiate Layer, thus creating greater business agility with process extensions and best of breed applications managed by cross- application process orchestration. 3. The Innovate Layer contains all the business capabilities required for engagement, collaboration and intuitive decision making. This is the layer where innovation will occur, as people engage one another in a secure yet open and informed way. 4. Simplify IT by minimizing complexity, improving performance and lowering cost with secure, reliable and managed systems across the entire Enterprise. But what hasn’t been discussed is the pace layered architecture that Oracle AppAdvantage adopts. What is it, what are its origins and why is it relevant to enterprise scale applications and technologies? It’s actually a fascinating tale that spans the past 20 years and a basic understanding of it provides a wonderful context to what is evolving as the future of enterprise systems platforms. It all begins in 1994 with a book by noted architect Stewart Brand, of ’Whole Earth Catalog’ fame. In his 1994 book How Buildings Learn, Brand popularized the term ‘Shearing Layers’, arguing that any building is actually a hierarchy of pieces, each of which inherently changes at different rates. In 1997 he produced a 6 part BBC Series adapted from the book, in which Part 6 focuses on Shearing Layers. In this segment Brand begins to introduce the concept of ‘pace’. Brand further refined this idea in his subsequent book, The Clock of the Long Now, which began to link the concept of Shearing Layers to computing and introduced the term ‘pace layering’, where he proposes that: “An imperative emerges: an adaptive [system] has to allow slippage between the differently-paced systems … otherwise the slow systems block the flow of the quick ones and the quick ones tear up the slow ones with their constant change. Embedding the systems together may look efficient at first but over time it is the opposite and destructive as well.” In 2000, IBM architects Ian Simmonds and David Ing published a paper entitled A Shearing Layers Approach to Information Systems Development, which applied the concept of Shearing Layers to systems design and development. It argued that at the time systems were still too rigid; that they constrained organizations by their inability to adapt to changes. The findings in the Conclusions section are particularly striking: “Our starting motivation was that enterprises need to become more adaptive, and that an aspect of doing that is having adaptable computer systems. The challenge is then to optimize information systems development for change (high maintenance) rather than stability (low maintenance). Our response is to make it explicit within software engineering the notion of shearing layers, and explore it as the principle that systems should be built to be adaptable in response to the qualitatively different rates of change to which they will be subjected. This allows us to separate functions that should legitimately change relatively slowly and at significant cost from that which should be changeable often, quickly and cheaply.” The problem at the time of course was that this vision of adaptable systems was simply not possible within the confines of 1st generation ERP, which were conceived, designed and developed for standardization and compliance. It wasn’t until the maturity of open, standards based integration, and the middleware innovation that followed, that pace layering became an achievable goal. And Oracle is leading the way. Oracle’s AppAdvantage framework makes pace layering come alive by taking a strategic vision 20 years in the making and transforming it to a reality. It allows enterprises to retain and even optimize their existing ERP systems, while wrapping around those ERP systems three layers of capabilities that inherently adapt as needed, at a pace that’s optimal for the enterprise.

  Read the article

• Linq to sql C# updating reference Tables

  - by Laurence Burke

  ok reclarification I am adding a new address and I know the structure as AddressID = PK and all other entities are non nullable. Now on insert of a new row the addrID Pk is autogened and I am wondering if I would have to get that to create a new row in the referencing table or does that automatically get generated also. also I want to be able to repopulate the dropdownlist that lists the current employee's addresses with the newly created address. static uint _curEmpID; protected void btnAdd_Click(object sender, EventArgs e) { if (txtZip.Text != "" && txtAdd1.Text != "" && txtCity.Text != "") { TestDataClassDataContext dc = new TestDataClassDataContext(); Address addr = new Address() { AddressLine1 = txtAdd1.Text, AddressLine2 = txtAdd2.Text, City = txtCity.Text, PostalCode = txtZip.Text, StateProvinceID = Convert.ToInt32(ddlState.SelectedValue) }; dc.Addresses.InsertOnSubmit(addr); lblSuccess.Visible = true; lblErrMsg.Visible = false; dc.SubmitChanges(); // // TODO: add reference from new address to CurEmp Table // SetAddrList(); } else { lblErrMsg.Text = "Invalid Input"; lblErrMsg.Visible = true; } } protected void ddlAddList_SelectedIndexChanged(object sender, EventArgs e) { lblErrMsg.Visible = false; lblSuccess.Visible = false; TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; if (ddlAddList.SelectedValue != "-1") { var addr = (from a in dc.Addresses where a.AddressID == Convert.ToInt32(ddlAddList.SelectedValue) select a).FirstOrDefault(); txtAdd1.Text = addr.AddressLine1; txtAdd2.Text = addr.AddressLine2; txtCity.Text = addr.City; txtZip.Text = addr.PostalCode; ddlState.SelectedValue = addr.StateProvinceID.ToString(); btnSubmit.Visible = true; btnAdd.Visible = false; } else { txtAdd1.Text = ""; txtAdd2.Text = ""; txtCity.Text = ""; txtZip.Text = ""; btnAdd.Visible = true; btnSubmit.Visible = false; } } protected void SetAddrList() { TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; var addList = from addr in dc.Addresses from eaddr in dc.EmployeeAddresses where eaddr.EmployeeID == _curEmpID && addr.AddressID == eaddr.AddressID select new { AddValue = addr.AddressID, AddText = addr.AddressID, }; ddlAddList.DataSource = addList; ddlAddList.DataValueField = "AddValue"; ddlAddList.DataTextField = "AddText"; ddlAddList.DataBind(); ddlAddList.Items.Add(new ListItem("<Add Address>", "-1")); } OK I am hoping that I did not include too much code. I would really appreciate any other comments about I could otherwise improve this code in any other ways also.

  Read the article

• Adding rows with linq trouble with reference table

  - by Laurence Burke

  I am adding a new address and I know the structure as AddressID = PK and all other entities are non nullable. Now on insert of a new row the addrID Pk is autogened and I am wondering if I would have to get that to create a new row in the referencing table EmployeeAddress or does that automatically get generated also. also I want to be able to repopulate the dropdownlist that lists the current employee's addresses with the newly created address. static uint _curEmpID; protected void btnAdd_Click(object sender, EventArgs e) { if (txtZip.Text != "" && txtAdd1.Text != "" && txtCity.Text != "") { TestDataClassDataContext dc = new TestDataClassDataContext(); Address addr = new Address() { AddressLine1 = txtAdd1.Text, AddressLine2 = txtAdd2.Text, City = txtCity.Text, PostalCode = txtZip.Text, StateProvinceID = Convert.ToInt32(ddlState.SelectedValue) }; dc.Addresses.InsertOnSubmit(addr); lblSuccess.Visible = true; lblErrMsg.Visible = false; dc.SubmitChanges(); // // TODO: insert new row in EmployeeAddress to reference CurEmp to newly created address // SetAddrList(); } else { lblErrMsg.Text = "Invalid Input"; lblErrMsg.Visible = true; } } protected void ddlAddList_SelectedIndexChanged(object sender, EventArgs e) { lblErrMsg.Visible = false; lblSuccess.Visible = false; TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; if (ddlAddList.SelectedValue != "-1") { var addr = (from a in dc.Addresses where a.AddressID == Convert.ToInt32(ddlAddList.SelectedValue) select a).FirstOrDefault(); txtAdd1.Text = addr.AddressLine1; txtAdd2.Text = addr.AddressLine2; txtCity.Text = addr.City; txtZip.Text = addr.PostalCode; ddlState.SelectedValue = addr.StateProvinceID.ToString(); btnSubmit.Visible = true; btnAdd.Visible = false; } else { txtAdd1.Text = ""; txtAdd2.Text = ""; txtCity.Text = ""; txtZip.Text = ""; btnAdd.Visible = true; btnSubmit.Visible = false; } } protected void SetAddrList() { TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; var addList = from addr in dc.Addresses from eaddr in dc.EmployeeAddresses where eaddr.EmployeeID == _curEmpID && addr.AddressID == eaddr.AddressID select new { AddValue = addr.AddressID, AddText = addr.AddressID, }; ddlAddList.DataSource = addList; ddlAddList.DataValueField = "AddValue"; ddlAddList.DataTextField = "AddText"; ddlAddList.DataBind(); ddlAddList.Items.Add(new ListItem("<Add Address>", "-1")); } OK I am hoping that I did not include too much code. I would really appreciate any other comments about I could otherwise improve this code in any other ways also.

  Read the article

• change prototype script to jquery one

  - by steve

  I have this form submit code: Event.observe(window, 'load', init, false); function init() { Event.observe('addressForm', 'submit', storeAddress); } function storeAddress(e) { $('response').innerHTML = 'Adding email address...'; var pars = 'address=' + escape($F('address')); var myAjax = new Ajax.Updater('response', 'ajaxServer.php', {method: 'get', parameters: pars}); Event.stop(e); } How can I change it to work with jQuery? Here is the html form: <form id="addressForm" action="index.php" method="get"> <b>Email:</b> <input type="text" name="address" id="address" size="25"><br> <input name="Submit" value="Submit" type="submit" /> <p id="response"><?php echo(storeAddress()); ?></p> </form> and this is php code at start of document: <?php require_once("inc/storeAddress.php"); ?>

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• How to do this Python / MySQL manipulation (match) more efficiently?

  - by NJTechie

  Following is my data : Company Table : ID Company Address City State Zip Phone 1 ABC 123 Oak St Philly PA 17542 7329878901 2 CDE 111 Joe St Newark NJ 08654 3 GHI 211 Foe St Brick NJ 07740 7321178901 4 JAK 777 Wall Ocean NJ 07764 7322278901 5 KLE 87 Ilk St Plains NY 07654 7376578901 6 AB 1 W.House SField PA 87656 7329878901 Branch Office Table : ID Address City State Zip Phone 1 323 Alk St Philly PA 17542 7329832221 1 171 Joe St Newark NJ 08654 3 287 Foe St Brick NJ 07740 7321178901 3 700 Wall Ocean NJ 07764 7322278901 1 89 Blk St Surrey NY 07154 7376222901 File to be Matched (In MySQL): ID Company Address City State Zip Phone 1 ABC 123 Oak St Philly PA 17542 7329878901 2 AB 171 Joe St Newark NJ 08654 3 GHI 211 Foe St Brick NJ 07740 7321178901 4 JAK 777 Wall Ocean NJ 07764 7322278901 5 K 87 Ilk St Plains NY 07654 7376578901 Resulting File : ID Company Address City State Zip Phone appendedID 1 ABC 123 Oak St Philly PA 17542 7329878901 [Original record, field always empty] 1 ABC 171 Joe St Newark NJ 08654 1 [Company Table] 1 ABC 323 Alk St Philly PA 17542 7329832221 1 [Branch Office Table] 1 AB 1 W.House SField PA 87656 7329878901 6 [Partial firm and State, Zip match] 2 CDE 111 Joe St Newark NJ 08654 3 GHI 211 Foe St Brick NJ 07740 7321178901 3 GHI 700 Wall Ocean NJ 07764 7322278901 3 3 GHI 287 Foe St Brick NJ 07740 7321178901 3 4 JAK 777 Wall Ocean NJ 07764 7322278901 5 KLE 87 Ilk St Surrey NY 07654 7376578901 5 KLE 89 Blk St Surrey NY 07154 7376222901 5 Requirement : 1) I have to match each firm on the 'File to be Matched' to that of Company and Branch Office tables (MySQL). 2) If there are multiple exact/partial matches, then the ID from Company, Branch Office table is inserted as a new row in the resulting file. 3) Not all the firms will be matched perfectly, in that case I have to match on partial Company names (like 5/8th of the company name) and any of the address fields and insert them in the resulting file. Please help me out in the most efficient solution for this problem.

  Read the article

• Hibernate: Check if object exists/changed

  - by swalkner

  Assuming I have an object Person with long id String firstName String lastName String address Then I'm generating a Person-object somewhere in my application. Now I'd like to check if the person exists in the database (= firstname/lastname-combination is in the database). If not = insert it. If yes, check, if the address is the same. If not = update the address. Of course, I can do some requests (first, try to load object with firstname/lastname), then (if existing), compare the address. But isn't there a simpler, cleaner approach? If got several different classes and do not like to have so many queries. I'd like to use annotations as if to say: firstname/lastname = they're the primary key. Check for them if the object exists. address is the parameter you have to compare if it stayed the same or not. Does Hibernate/JPA (or another framework) support something like that? pseude-code: if (database.containsObject(person)) { //containing according to compound keys if (database.containsChangedObject(person)) { database.updateObject(person); } } else { database.insertObject(person); }

  Read the article

• Oracle SOA Suite 11g Administrator's Handbook

  - by Antony Reynolds

  SOA Administration Book I have just received a copy of the “Oracle SOA Suite 11g Administrator's Handbook” so as soon as I have read it I will let you know what I think.  In the meantime the first thing that struck me was the author credentials, although I have never met either of them as I remember, I have read Admeds blog postings and they are a great community resource, so immediately I am well disposed towards the book.  Similarly Arun is an employee of my friend and co-author Matt Wright, and I have heard good things about him from Rubicon Red people. A first glance at the table of contents looks encouraging, I particularly like their approach to performance tuning where they give a clear concise explanation of the knobs they are using. More when I have read more.

  Read the article

• How to deal with or survive with the information overload

  - by Name

  I will better explain my question. I have been struggling with this for long time Everytime i want to read something for e,g book on java , then i find so much stuff like many tutorials , many ebooks that i am not able to decide which one to choose. I spend some time reading one , then 2 and so on and in the end i leave and gain nothing. I like the old days when we had only few resources like one hard book and at least i finish that from start to finish and gained much but now days there is so much information that mind jumps from one source to other and gain nothing what should i do

  Read the article

• Usernames are evil. How can I make Restful Authentication only require a username and password, inst

  - by Koning WWWWWWWWWWWWWWWWWWWWWWW

  As the title sais: How can I use the Restful Authentication Plugin with Ruby on Rails. When I want to create a new user, it requires me a (wrong-named, confusing field) login (= username), email address and password. However, I want, like Facebook does, only require the user to enter an email address and password, not a username. People will also login with this email address. Can anyone help me?

  Read the article

• I can't create a view in oracle database using sqlplus (insufficient privileges)

  - by Nubkadiya

  I'm running this SQL: CREATE VIEW showMembersInfo(MemberID,Fname,Lname,Address,DOB,Telephone,NIC,Email,WorkplaceID,WorkName,WorkAddress,WorkTelephone,StartingDate,ExpiryDate,Amount,WitnessID,WitName,WitAddress,WitNIC,WitEmail,WitTelephone) AS SELECT mem.MemberID,mem.FirstName,mem.LastName,mem.Address,mem.DOB,mem.Telephone,mem.NIC,mem.Email, wrk.WorkPlaceID,wrk.Name,wrk.Address,wrk.Telephone, anl.StartingDate,anl.ExpiryDate,anl.Amount, wit.WitnessID,wit.Name,wit.Address,wit.NIC,wit.Email,wit.Telephone FROM Member mem, WorkPlace wrk, AnnualFees anl, Witness wit WHERE mem.MemberID = anl.MemberID AND mem.WorkPlaceID = work.WorkPlaceID AND mem.WitnessID = wit.WitnessID When I try to create the view I get this error: ERROR at line 1: ORA-01031: insufficient privileges Why is that? I'm logged in to sqlplus using sysman

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >