Search Results

Search found 17984 results on 720 pages for 'log shipping'.

Page 162/720 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

    - by CapBBeard
    Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

    Read the article

  • Is there a simple way to daemon-ify a simple task?

    - by Jonas Byström
    I ssh into a server than start a job (for instance rsync), then I just want to be able to log out from the server and let the job run its course. But if I just do rsync ... & I think it's still connected to the tty in some way, and that the job dies when the tty goes away when logging out. Is there any (easy) way to disconnect the process from the tty to be able to log out without the process terminating?

    Read the article

  • How to troubleshoot a hardware problem on linux?

    - by Jack
    Just to note I am not having a problem at the moment, but have had previously so it sparked my curiosity... When a computer locks up suddenly to so caps lock flashes incessantly and the only possibility to restart....how do you troubleshoot what is causing it? On Windows there would be some errors in the event log...on Linux it seems there is no opportunity for anything to be written to the log, making it hard to troubleshoot... In this case, how would you troubleshoot the problem through linux?

    Read the article

  • What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

    - by Adrian Hope-Bailie
    We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

    Read the article

  • Nginx + Wordpress Multisite 3.4.2 + subdirectories + static pages and permalinks

    - by UrkoM
    I am trying to setup Wordpress Multisite, using subdirectories, with Nginx, php5-fpm, APC, and Batcache. As many other people, I am getting stuck in the rewrite rules for permalinks. I have followed these two guides, which seem to be as official as you can get: http://evansolomon.me/notes/faster-wordpress-multisite-nginx-batcache/ http://codex.wordpress.org/Nginx#WordPress_Multisite_Subdirectory_rules It is partially working: http://blog.ssis.edu.vn works. http://blog.ssis.edu.vn/umasse/ works. But other permalinks, like these two to a post or to a static page, don't work: http://blog.ssis.edu.vn/umasse/2008/12/12/hello-world-2/ http://blog.ssis.edu.vn/umasse/sample-page/ They either take you to a 404 error, or to some other blog! Here is my configuration: server { listen 80 default_server; server_name blog.ssis.edu.vn; root /var/www; access_log /var/log/nginx/blog-access.log; error_log /var/log/nginx/blog-error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Add trailing slash to */username requests rewrite ^/[_0-9a-zA-Z-]+$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { # Forbid PHP on upload dirs if ($uri ~ "uploads") { return 403; } client_max_body_size 25M; try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Any ideas are welcome! Have I done something wrong? I have disabled Batcache to see if it makes any difference, but still no go.

    Read the article

  • Port forwarding not working properly

    - by sudo work
    I'm trying to host a small web server from my home network; however, I have not been able to successfully port forward ports to the local server. My current network topology looks like this: Cable Modem/Router - Secondary Wireless Router - Many computers (including server) The modem/router I'm using is a Cisco (Scientific Atlantic) DPC2100, provided by my ISP. The wireless router that I'm using as the central hub to my home network is a Linksys E3000. The computer being used as a server is running Ubuntu 10.04 Server Edition. The main issue is that I can't access the server remotely, using my WAN IP address. I have port forwarded my wireless router; however, I believe that I need to somehow set my modem to bridge mode. As far as I can tell though, this isn't possible. Here are the various IP address settings: DPC2100 WAN: 69.xxx.xxx.xxx Internal IP: 192.168.100.1 Internal Network: 192.168.7.0 E3000 IP Address: 192.168.7.2 Gateway: 192.168.7.1 Internal IP: 192.168.1.1 Internal Network: 192.168.1.0 Server IP Address: 192.168.1.123 Gateway: 192.168.1.1 Now I can do an nmap at various nodes, and here are the results (from the server): nmap localhost: 22,25,53,80,110,139,143,445,631,993,995,3306,5432,8080 open nmap 192.168.7.2: 22,25,80 (filtered),110,139,445 open (ports I have forwarded in the E3000)* nmap 69.xxx.xxx.xxx: 1720 open *For some reason, I can SSH into the server at 192.168.7.2, but not view the website. Here are also some other settings: /etc/hosts/ 127.0.0.1 localhost 127.0.1.1 servername ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/apache2/sites-available/default snippet <VirtualHost *:80> DocumentRoot /srv/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> ... </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> ... </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> ... </Directory> </VirtualHost> Let me know if you need any other information; some stuff probably slipped my mind.

    Read the article

  • vsftp hangs at "150 Here comes the directory listing."

    - by Rikr
    In a vsftpd server enviroment, shared various directories from nfs mountpoints, I can log in without problem, but when I send the first "ls", the vsftp give me the directory listing: lftp [email protected]:~ ls -rw-rw-rw- 1 1160 1016 392 Jun 06 09:28 test.gif but not give me the shell again (lftp client). In the server log I can see that the last message is: "150 Here comes the directory listing." Why happend this?

    Read the article

  • How to check if windows has automatic updates waiting from the command line?

    - by Lee
    If a Windows server (2k3/2k8) is set to "download but not install" updates, is there a way to check from the command line.. perhaps a log file or something I can check with powershell, to see if there are any updates actually waiting to be installed? I'm trying to prevent having to manually log on to each server to check, even though they want the "trigger" pulled manually. We have an automation system in place I can use (CA Autosys) - just not sure what to have it look for.

    Read the article

  • Tool for logging NIC link state events.

    - by Alan B
    Intel NICs have a driver option (in Windows) that will log link state events to the system log, so if the network drops out periodically you can determine that fact. Does anyone know of a simple generic solution that does this, in other words one that is not part of the driver from a particular manufacturer? I know there are plenty of 'big iron' network monitoring tools out there but surely there's something really simple that runs as a service in Windows with minimal setup ? TIA

    Read the article

  • How can I scan from Canon PIXMA MX700 without disabling OS X firewall?

    - by Justin Love
    I have a Canon PIXMA MX700 connected by ethernet. When I first bought it I was using OS X 10.4, and scanner-initiated scanning worked fine. After upgrading to 10.6, neither scanner-initiated or scanning from MP Navigator EX works with the firewall enabled. The firewall lists exceptions for three applications: Canon IJ Network Scan Utility.app Canon IJ Network Scanner Selector.app MP Navigator EX 1.0.app I get no further blocked warnings, and /var/log/appfirewall.log lists nothing for today (my latest attempt to use it).

    Read the article

  • Graphics card artifacting

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

    Read the article

  • Consumer Priority Service - How many years of coverage should I buy for my Apple MacBook Pro 17"?

    - by jaffsmith
    I recently purchased a Apple MacBook Pro 17" online. It costs me $2299 plus shipping. If the unit should have an issue over the next few years I want to be fully covered so I will be purchasing the Consumer Priority Service extended warranty as well. The online dealer offers a 2 year or a 3 year for about $100 more, Is it worth the extra money for the 3 year warranty?

    Read the article

  • amazon ec2 ubuntu with gitlab and nginx - cant load?

    - by thebluefox
    Ok, so I've spooled up an Amazon EC2 server running Ubuntu, and then followed the instructions below to install GitLab; http://doc.gitlab.com/ce/install/installation.html The only step I've not been able to complete is running the following check on the status; sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production I get the following error; rake aborted! Errno::ENOMEM: Cannot allocate memory - whoami Which I presume is becuase my EC2 is just running a free tier setup, so isn't that well spec'd. Regardless, I've been trying to access this through my browser. I've set up the elastic IP and pointed my domain at it (for the purpose of this, lets say its git.mydom.co.uk). Doing a whois on this domain shows me its pointing to the right place. For some reason though, I get the "Oops, Chrome could not connect to git.mydom.co.uk". Now - for a period of time I was getting the Nginx holding page (telling me I still needed to perform configuration). This though disappeared after removing the default file from /etc/nginx/sites-enabled/ (after reading this could be issue on a troubleshooting page). Since then, I've had nothing, even when I symlinked the file back in from /sites-available. I've tried changing the owner of the git.mydom.co.uk file sat inside /sites-enabled and /sites-available to www-data, as suggested here, but I could only change the permission of the file in /sites-available, and not the symlinked one in /sites-enabled. The content of this file is as follows; upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80 default_server; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.mydom.co.uk; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # Increase this if you want to upload large attachments # Or if you want to accept large git objects over http client_max_body_size 20m; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } All the paths mentioned in here look ok...I'm about at the end of my knowledge now!

    Read the article

  • Tomcat's time problem when app inserts records in DB

    - by xain
    Hi, I have an apache 2 web server working with a tomcat 6 servlet container running on ununtu 9.1, integrated via mod_proxy. I have the following time mismatch problem: When apache log to its access-log file, the date/time is correct. When a grails app running on tomcat inserts date-related information in the DB, the time is three hours ahead Any tips on how to fix tomcat's datetime problem ? Thanks

    Read the article

  • Lighttpd with FastCGI configuration running ViewVC - rewrite problems

    - by 0xC0000022L
    At the moment I am struggling with the configuration of lighttpd together with ViewVC. The configuration was ported from Apache 2.2.x, which is still running on the machine, serving the WebDAV/SVN stuff, being proxied through. Now, the problem I am having appears to be with the rewrite rules and I'm not really sure what I am missing here. Here's my configuration (slightly condensed to keep it concise): var.hgwebfcgi = "/var/www/vcs/bin/hgweb.fcgi" var.viewvcfcgi = "/var/www/vcs/bin/wsgi/viewvc.fcgi" var.viewvcstatic = "/var/www/vcs/templates/docroot" var.vcs_errorlog = "/var/log/lighttpd/error.log" var.vcs_accesslog = "/var/log/lighttpd/access.log" $HTTP["host"] =~ "domain.tld" { $SERVER["socket"] == ":443" { protocol = "https://" ssl.engine = "enable" ssl.pemfile = "/etc/lighttpd/ssl/..." ssl.ca-file = "/etc/lighttpd/ssl/..." ssl.use-sslv2 = "disable" setenv.add-environment = ( "HTTPS" => "on" ) url.rewrite-once += ("^/mercurial$" => "/mercurial/" ) url.rewrite-once += ("^/$" => "/viewvc.fcgi" ) alias.url += ( "/viewvc-static" => var.viewvcstatic ) alias.url += ( "/robots.txt" => var.robots ) alias.url += ( "/favicon.ico" => var.favicon ) alias.url += ( "/mercurial" => var.hgwebfcgi ) alias.url += ( "/viewvc.fcgi" => var.viewvcfcgi ) $HTTP["url"] =~ "^/mercurial" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.hgwebfcgi, "socket" => "/tmp/hgwebdir.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } else $HTTP["url"] =~ "^/viewvc\.fcgi" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.viewvcfcgi, "socket" => "/tmp/viewvc.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } expire.url = ( "/viewvc-static" => "access plus 60 days" ) server.errorlog = var.vcs_errorlog accesslog.filename = var.vcs_accesslog } } Now, when I access the domain.tld, I correctly see the index of the repositories. However, when I look at the links for each respective repository (or click them, for that matter), it's of the form https://domain.tld/viewvc.fcgi/reponame instead of the intended https://domain.tld/reponame. What do I have to change/add to achieve this? Do I have to "abuse" the index file mechanism somehow? Goal is to keep the /mercurial alias functional. So far I've tried sifting through the lighttpd book from Packt again, also through the lighttpd documentation, but found nothing that seemed to match the problem.

    Read the article

  • nginx rewrite for /blah/(.*) /$1

    - by skrewler
    I'm migrating from mod_php to nginx. I got everything working except for this rewrite.. I'm just not familiar enough with nginx configuration to know the correct way to do this. I came up with this by looking at a sample on the nginx site. server { server_name test01.www.myhost.com; root /home/vhosts/my_home/blah; access_log /var/log/nginx/blah.access.log; error_log /var/log/nginx/blah.error.log; index index.php; location / { try_files $uri $uri/ @rewrites; } location @rewrites { rewrite ^ /index.php last; rewrite ^/ht/userGreeting.php /js/iFrame/index.php last; rewrite ^/ht/(.*)$ /$1 last; rewrite ^/userGreeting.php$ /js/iFrame/index.php last; rewrite ^/a$ /adminLogin.php last; rewrite ^/boom\/(.*)$ /boom/index.php?q=$1 last; rewrite ^favicon.ico$ favico_ry.ico last; } # This block will catch static file requests, such as images, css, js # The ?: prefix is a 'non-capturing' mark, meaning we do not require # the pattern to be captured into $1 which should help improve performance location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } include php.conf; } The issue I'm having is with this rewrite: rewrite ^ht\/(.*)$ /$1 last; 99% of requests that will hit this rewrite are static files. So I think maybe it's getting sent to the static files section and that's where things are being messed up? I tried adding this but it didn't work: location ~* ^ht\/.*\.(?:ico|css|js|gif|jpe?g|png)$ { # Some basic cache-control for static files to be sent to the browser expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } Any help would be appreciated. I know the best thing to do would be to just change the references of /ht/whatever.jpg to /whatever.jpg in the code.. but that's not an option for now.

    Read the article

  • Contacts see me Offline on WLM Althoung I'm online and chatting with them

    - by Eias.N
    Hello, this problem appears just a few days ago , and still till this moment , my problem is that Contacts in my Windows Live Messenger (Version :14.0.8089.726 ) told me that I'm offline while I'm online , some of theme told me that I log in and out every moment while I'm still log in , after that they see me online again , so what is the problem exactly , and how Can i Get rid of it ?

    Read the article

  • nginx+django serving static files

    - by avalore
    I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

    Read the article

  • Can I compile mutt under cygwin?

    - by openist
    I've been trying to compile mutt under cygwin for a few days. I always get the message: "configure: error: no curses library found" I have all the curses + devel stuff installed + termpcap, which I heard might be related. I've tried re-installing, i've tried specifying the location on the configure command line, but i'm not sure i'm doing it right: "--with-curses=/usr/lib/libncurses.a --with-curses=/usr/lib/libncurses.dll.a --with-curses=/usr/include/ncurses" Here's my config.log: http://floatsolutions.net/docs/config.log Any ideas?

    Read the article

  • SNMP Traps: Telling the difference between sources

    - by MHibbin
    I am logging all incoming SNMP traps to file, for further processing, via: snmptrapd -Lf /path/to/my/file.log So this will log all traps coming in on port 162. Is there a way I can tell the differences between different sources, i.e vendors. I believe this would be the "OID" field but i'm unsure. Any thoughts would be welcomed, if not I will just have to use a lookup with IP addresses, but I'm sure I saw that there is a unique part to each vendor. Cheers

    Read the article

  • After returning from standby mode, win7 asks for login twice

    - by Force Flow
    When a Windows 7 32-bit PC attached to a domain comes back from standby mode and has no user logged in, if I log in once, it jumps back to the login screen. If I log in for a second time, then it actually logs in. This happens on multiple PCs, and is not a hardware issue. The PCs are also free of viruses/malware, and are otherwise problem-free. Why does it do this, and is there a way to prevent this annoyance?

    Read the article

  • Finding the reason of a force shutdown of a VM

    - by Ricardo Reyes
    We have a linux VM running under XenServer that reboots itself with no apparent reason. Checking the /var/log files in Xen we noticed that it's sending a force shutdown to the VM, like this: messages:Dec 6 15:01:07 XenSrvDell2 BLKTAP-DAEMON[7309]: /local/domain/0/backend/tap/19/51728: got start/shutdown watch on /local/domain/0/backend/tap/19/51728/tapdisk-request What we can't find is the reason why the force-shutdown was initiated. Is there any "higher level log" that might tell us who or why triggered the shutdown?

    Read the article

  • Nginx not working properly on subdomains [SOLVED]

    - by javipas
    I've been trying to setup a Sugar CRM instance. I've got a domain that has its main site on a server (www.domain.com) and I've created a subdomain (sugar.domain.com), but I wnat this subdomain to be hosted on another server. This second server has nginx installed, and there's a working WordPress blog there on a virtualhost, so I would need to setup a second site. To do this I've created the directory structure, and I've created a /etc/nginx/sites-enabled/sugar.domain.com configuration file that has the following: * server { listen 80; server_name sugar.domain.com *.domain.com; access_log /var/www/sugar/log/access.log; error_log /var/www/sugar/log/error.log info; location / { root /var/www/sugar; index index.php; } location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/sugar/$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort on; fastcgi_read_timeout 180; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } } upstream backend { server 127.0.0.1:9000; } As far as I know, I need the *.domain.com parameter on the "server_name" flag, but something is crashing here: I get either a 403 Forbidden error, or I get PHP code (I can read the PHP file code in the browser, like normal text) that somehow is not executed. I've tried setting permissions to 755 inside the /var/www/sugar/ directory, and I've also set up the owner:group with a chown -R www-data:www-data /var/www/sugar/ The thing is, I don't now if my mistake is in the nginx site configuration, in my folder permissions, or in other place :( Could it be because of the main domain (www.domain.com) is hosted on other server? Do they have to be together necessarily?

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >