Search Results

Search found 4732 results on 190 pages for 'packages'.

Page 163/190 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Ubuntu 12.10 broken, shutdown while updating

  - by UnknownDude

  I got the following problem: My PC shutdown while upgrading from 12.04 to 12.10. Everything seems to work but I can't install the missing updates. It always tells me to run apt-get install -f, but when I do so it just says: (It's in German, hope it doesn't matter) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Abhängigkeiten werden korrigiert... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: espeak gcc-4.6-base:i386 gir1.2-notify-0.7 libcamel-1.2-29 libebook-1.2-12 libedataserver-1.2-15 libgconf2-4 libgnome-bluetooth8 libgnome-menu2 libgnomekbd7 libgomp1:i386 libgweather-3-0 libimobiledevice2 libindicate5 libkpathsea5 libpoppler19 libusbmuxd1 python-gmenu Verwenden Sie »apt-get autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden installiert: nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware Vorgeschlagene Pakete: xfonts-100dpi xfonts-75dpi gpointing-device-settings touchfreeze firmware-linux Die folgenden Pakete werden ENTFERNT: nvidia-current Die folgenden Pakete werden aktualisiert (Upgrade): nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware 20 aktualisiert, 0 neu installiert, 1 zu entfernen und 133 nicht aktualisiert. 8 nicht vollständig installiert oder entfernt. Es müssen noch 0 B von 70,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 184 MB Plattenplatz freigegeben. Möchten Sie fortfahren [J/n]? j (Lese Datenbank ... 242727 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von nvidia-current ... Removing all DKMS Modules Error! There are no instances of module: nvidia-current 295.40 located in the DKMS tree. Done. Traceback (most recent call last): File "/usr/bin/quirks-handler", line 26, in <module> import Quirks.quirkapplier File "/usr/lib/python2.7/dist-packages/Quirks/quirkapplier.py", line 26, in <module> import XKit.xutils ImportError: No module named XKit.xutils dpkg: Fehler beim Bearbeiten von nvidia-current (--remove): Unterprozess installiertes pre-removal-Skript gab den Fehlerwert 1 zurück Trigger für bamfdaemon werden verarbeitet ... Rebuilding /usr/share/applications/bamf.index... Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Fehler traten auf beim Bearbeiten von: nvidia-current E: Sub-process /usr/bin/dpkg returned an error code (1) When I try to remove nvidia-current it tells me to run apt-get install -f. Do you guys have any idea? I don't want to reinstall my whole system, takes a lot of time to encrypt everything again and so on.

  Read the article

• libreoffice-base not configured yet

  - by Wicky

  I have the LibreOffice ppa installed (ppa:libreoffice/ppa) and today I had a problem after updating. I got the following error. Reading package lists ... Done Building dependency tree Reading state information ... Ready You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libreoffice-base: Depends: libreoffice-base-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-base-drivers (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed libreoffice-core: Breaks: libreoffice-base (<1: ~ 4.3.0-3ubuntu1 precise1) but 4.3.0-0ubuntu1 ~ precise1 is installed E: Unmet dependencies. Try to use -f. After trying sudo apt-get install -f I got the following output Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De status informatie wordt gelezen... Klaar Vereisten worden gecorrigeerd... Klaar De volgende extra pakketten zullen geïnstalleerd worden: libreoffice-base Voorgestelde pakketten: libreoffice-gcj libreoffice-report-builder unixodbc De volgende pakketten zullen opgewaardeerd worden: libreoffice-base 1 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd. 3 pakketten niet volledig geïnstalleerd of verwijderd. Er moeten 0 B/2170 kB aan archieven opgehaald worden. Door deze operatie zal er 2841 kB extra schijfruimte gebruikt worden. Wilt u doorgaan [J/n]? dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-base: libreoffice-base is afhankelijk van libreoffice-base-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-base-drivers (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-drivers op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-core (1:4.3.0-3ubuntu1~precise1) breaks libreoffice-base (<< 1:4.3.0-3ubuntu1~precise1) and is geïnstalleerd. Version of libreoffice-base to be configured is 1:4.3.0-0ubuntu1~precise1. dpkg: fout bij afhandelen van libreoffice-base (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-report-builder-bin: libreoffice-report-builder-bin is afhankelijk van libreoffice-base; maar:Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Pakket libreoffice-base is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice-report-builder-bin (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice: libreoffice is afhankelijk van libreoffice-base; maar: Pakket libreoffice-base is nog niet geconfigureerd. libreoffice is afhankelijk van libreoffice-report-builder-bin; maar: Pakket libreoffice-report-builder-bin is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice (--configure): vereistenproblemen - blijft ongeconfigureerd Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Fouten gevonden tijdens behandelen van: libreoffice-base libreoffice-report-builder-bin libreoffice E: Sub-process /usr/bin/dpkg returned an error code (1) How can I solve this problem so the dependencies are solved? Do I have to configure libreoffice-base manually?

  Read the article

• How can I back up my ubuntu system?

  - by Eloff

  I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

  Read the article

• Oracle Big Data Software Downloads

  - by Mike.Hallett(at)Oracle-BI&EPM

  Companies have been making business decisions for decades based on transactional data stored in relational databases. Beyond that critical data, is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and photographs that can be mined for useful information. Oracle offers a broad integrated portfolio of products to help you acquire and organize these diverse data sources and analyze them alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data Connectors Downloads here, includes: Oracle SQL Connector for Hadoop Distributed File System Release 2.1.0 Oracle Loader for Hadoop Release 2.1.0 Oracle Data Integrator Companion 11g Oracle R Connector for Hadoop v 2.1 Oracle Big Data Documentation The Oracle Big Data solution offers an integrated portfolio of products to help you organize and analyze your diverse data sources alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data, Release 2.2.0 - E41604_01 zip (27.4 MB) Integrated Software and Big Data Connectors User's Guide HTML PDF Oracle Data Integrator (ODI) Application Adapter for Hadoop Apache Hadoop is designed to handle and process data that is typically from data sources that are non-relational and data volumes that are beyond what is handled by relational databases. Typical processing in Hadoop includes data validation and transformations that are programmed as MapReduce jobs. Designing and implementing a MapReduce job usually requires expert programming knowledge. However, when you use Oracle Data Integrator with the Application Adapter for Hadoop, you do not need to write MapReduce jobs. Oracle Data Integrator uses Hive and the Hive Query Language (HiveQL), a SQL-like language for implementing MapReduce jobs. Employing familiar and easy-to-use tools and pre-configured knowledge modules (KMs), the application adapter provides the following capabilities: Loading data into Hadoop from the local file system and HDFS Performing validation and transformation of data within Hadoop Loading processed data from Hadoop to an Oracle database for further processing and generating reports Oracle Database Loader for Hadoop Oracle Loader for Hadoop is an efficient and high-performance loader for fast movement of data from a Hadoop cluster into a table in an Oracle database. It pre-partitions the data if necessary and transforms it into a database-ready format. Oracle Loader for Hadoop is a Java MapReduce application that balances the data across reducers to help maximize performance. Oracle R Connector for Hadoop Oracle R Connector for Hadoop is a collection of R packages that provide: Interfaces to work with Hive tables, the Apache Hadoop compute infrastructure, the local R environment, and Oracle database tables Predictive analytic techniques, written in R or Java as Hadoop MapReduce jobs, that can be applied to data in HDFS files You install and load this package as you would any other R package. Using simple R functions, you can perform tasks such as: Access and transform HDFS data using a Hive-enabled transparency layer Use the R language for writing mappers and reducers Copy data between R memory, the local file system, HDFS, Hive, and Oracle databases Schedule R programs to execute as Hadoop MapReduce jobs and return the results to any of those locations Oracle SQL Connector for Hadoop Distributed File System Using Oracle SQL Connector for HDFS, you can use an Oracle Database to access and analyze data residing in Hadoop in these formats: Data Pump files in HDFS Delimited text files in HDFS Hive tables For other file formats, such as JSON files, you can stage the input in Hive tables before using Oracle SQL Connector for HDFS. Oracle SQL Connector for HDFS uses external tables to provide Oracle Database with read access to Hive tables, and to delimited text files and Data Pump files in HDFS. Related Documentation Cloudera's Distribution Including Apache Hadoop Library HTML Oracle R Enterprise HTML Oracle NoSQL Database HTML Recent Blog Posts Big Data Appliance vs. DIY Price Comparison Big Data: Architecture Overview Big Data: Achieve the Impossible in Real-Time Big Data: Vertical Behavioral Analytics Big Data: In-Memory MapReduce Flume and Hive for Log Analytics Building Workflows in Oozie

  Read the article

• FFmpeg Video Hosting for Linux and Windows Server

  - by Aditi

  FFmpeg hosting is a special type of web hosting where the host servers have video transcoding software loaded on them, which allows the automatic conversion of videos from one format to another. FFmpeg is a cross-platform solution for recording, converting, transcoding and stream audio and video. It includes libavcodec – the leading audio/video codec library. FFmpeg hosting gets its name from a set of server side programs (modules) called FFmpeg. There are a number of applications or web scripts available, which allow webmasters to create their own video sharing websites. Video hosting typically requires: PHP 4.3 and above (including support of CLI) Mencoder and also Mplayer FFMpeg-PHP MySQL database server LAME MP3 Encoder Libogg + Libvorbis GD Library 2 or higher CGI-BIN There are number of web service providers who provide FFmpeg hosting service. Following is a list of some of the Best FFmpeg hosting providers for both Linux and Windows Server below. Dream Host Dreamhost provides for web based email access, mail filtering, spam filtering, unlimited email ids, vacation autoresponder, python support, full CGI access and many more services. Price: $7.95 View Details Micfo It offers unlimited disk space and bandwidth. Other services include free domain for life and free Website Transfer with many more services. All in all one of the best option to consider. Price: $5 View Details Host Upon HostUpon offers FFMpeg Hosting on all their hosting packages, with readily installed modules to start a Video website or Social Network with Video uploading. These scripts such as Boonex Dolphin / PHPMotion / Social Engine / ABKsoft Scripts / Joomla Video Plugin / Clipshare / ClipBucket / Social Media / Rayzz / Vidi Script work with their ffmpeg. Their FFMPEG hosting plan offers 24/7/365 support with typical response time of 15min or less. Price: $5.95 View Details DownTown Host DownTown Host provides full and exceptional support by live chat and telephone. It has high-power, modern servers and the finest web server technology. It offers free search engine Submission and continuous data backup protection with free email forwarding and site move. There are many more services too. Site5 This ffmpeg service provider offers uptime guarantee, a real time stats on each server and many more attractive services. Price: $4.95 View Details Cirtex Hosting Cirtex Hosting allows to host 7 websites & domains and provides for unlimited storage space and monthly bandwidth. It also offers FTP and email accounts and many more services. Price: $2.49 View Details FLV Hosting FLV hosting supplies RTMP SERVER STREAMING for large size video streaming and server side recording. It is flexible and costs less. They customize to the clients requirements. Price: $9.95 View Details AptHost This hosting service provides for 24x7x365 Premium Support and fully ffmpeg enabled services. Price: $4.95 View Details HostMDS Great Support, Priced Low. It provides for SSH access, CGI, Ruby on Rails, Perl, PHP, MySQL, front page extentions, 24/7 Support, FREE Domain transfer and spam filtering. It offers instant account setup, low latency fast bandwidth & much more! They were formerly known as Vistapages. Price: $4.95 View Details Related posts:Best WordPress Video Themes for a Video Blog Free Web Based Applications 24+ Coda Alternatives for Windows and Linux

  Read the article

• How to I do install DB2 ODBC?

  - by Justin

  I have been trying, with no success, to install a IBM DB2 ODBC driver so that my PHP server can connect to a database. I've tried installing the db2_connect and get all sorts of problems, I tried install I Access for Linux and the RPM did not install right nor did using alien breed any useful results. I've also tried the DB2 Runtime v8.1, no success. If I attempt to run the rpm it claims I need dependencies that I can't find in apt-get. Yum is also not very helpful as it appears I don't have any repositories installed or lists... Running the simple RPM gives me this result in terminal: # rpm -ivh iSeriesAccess-7.1.0-1.0.x86_64.rpm rpm: RPM should not be used directly install RPM packages, use Alien instead! rpm: However assuming you know what you are doing... error: Failed dependencies: /bin/ln is needed by iSeriesAccess-7.1.0-1.0.x86_64 /sbin/ldconfig is needed by iSeriesAccess-7.1.0-1.0.x86_64 /bin/rm is needed by iSeriesAccess-7.1.0-1.0.x86_64 /bin/sh is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libdl.so.2()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libgcc_s.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libm.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libodbcinst.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libodbc.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libpthread.so.0(GLIBC_2.3.2)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 librt.so.1()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 librt.so.1(GLIBC_2.2.5)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6()(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6(CXXABI_1.3)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 libstdc++.so.6(GLIBCXX_3.4)(64bit) is needed by iSeriesAccess-7.1.0-1.0.x86_64 Using alien and running the dkpg gives me thes headaque: $ alien iSeriesAccess-7.1.0-1.0.x86_64.rpm --scripts # dpkg -i iseriesaccess_7.1.0-2_amd64.deb (Reading database ... 127664 files and directories currently installed.) Preparing to replace iseriesaccess 7.1.0-2 (using iseriesaccess_7.1.0-2_amd64.deb) ... Unpacking replacement iseriesaccess ... post uninstall processing for iSeriesAccess 1.0...upgrade /var/lib/dpkg/info/iseriesaccess.postrm: line 8: [: upgrade: integer expression expected Setting up iseriesaccess (7.1.0-2) ... post install processing for iSeriesAccess 1.0...configure iSeries Access ODBC Driver has been deleted (if it existed at all) because its usage count became zero odbcinst: Driver installed. Usage count increased to 1. Target directory is /etc odbcinst: Driver installed. Usage count increased to 3. Target directory is /etc Processing triggers for libc-bin ... ldconfig deferred processing now taking place So it seems the files installed right, well my odbc driver shows up but db2cli.ini is no where to be found. So several questions. Is there a better alternative to connect php to db2, say an ubuntu package I can just install? Can someone direct me to the steps that makes my ubuntu server works well with the RPM so I can build my db2 instance? Also remember I'm connection to an I Series remotely. I'm not using the DB2 Express C thing, even if I did try it to get the db2 php functions to work. And I don't have zend but I think I have every other package on the ubuntu repositories. Help, thank you!

  Read the article

• Help trying to get two-finger scrolling to work on Asus UL80VT

  - by Dan2k3k4

  Multi-touch works fine on Windows 7 with: two-fingers scroll vertical and horizontally, two-finger tap for middle click, and three-finger tap for right click. However with Ubuntu, I've never been able to get multi-touch to "save" and work, I was able to get it to work a few times but after restarting - it would just reset back. I have the settings for two-finger scrolling on: Mouse and Touchpad Touchpad Two-finger scrolling (selected) Enable horizontal scrolling (ticked) The cursor stops moving when I try to scroll with two fingers, but it doesn't actually scroll the page. When I perform xinput list, I get: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ETPS/2 Elantech ETF0401 id=13 [slave pointer (2)] I've tried to install some 'synaptics-dkms' bug-fix (from a few years back) but that didn't work, so I removed that. I've tried installing 'uTouch' but that didn't seem to do anything so removed it. Here's what I have installed now: dpkg --get-selections installed-software grep 'touch\|mouse\|track\|synapt' installed-software libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install printer-driver-ptouch --- install ptouch-driver --- install xserver-xorg-input-multitouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-vmmouse --- install libnetfilter-conntrack3 --- install libxatracker1 --- install xserver-xorg-input-synaptics --- install So, I'll start again, what should I do now to get two-finger scrolling to work and ensure it works after restarting? Also doing: synclient TapButton1=1 TapButton2=2 TapButton3=3 ...works but doesn't save after restarting. However doing: synclient VertTwoFingerScroll=1 HorizTwoFingerScroll=1 Does NOT work to fix the two-finger scrolling. Output of: cat /var/log/Xorg.0.log | grep -i synaptics [ 4.576] (II) LoadModule: "synaptics" [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.577] (II) Module synaptics: vendor="X.Org Foundation" [ 4.577] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech ETF0401' [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: x-axis range 0 - 1088 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: y-axis range 0 - 704 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: pressure range 0 - 255 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: finger width range 0 - 16 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: buttons: left right middle double triple scroll-buttons [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: Vendor 0x2 Product 0xe [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: (accel) MinSpeed is now constant deceleration 2.5 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: MaxSpeed is now 1.75 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: AccelFactor is now 0.154 [ 4.589] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found Tried installing synaptiks but that didn't seem to work either, so removed it. Temporary Fix (works until I restart) Doing the following commands: modprobe -r psmouse modprobe psmouse proto=imps Works but now xinput list shows up as: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ImPS/2 Generic Wheel Mouse id=13 [slave pointer (2)] Instead of Elantech, and it gets reset when I reboot. Solution (not ideal for most people) So, I ended up reinstalling a fresh 12.04 after indirectly playing around with burg and plymouth then removing plymouth which removed 50+ packages (I saw the warnings but was way too tired and assumed I could just 'reinstall' them all after (except that didn't work). Right now xinput list shows up as: ? Virtual core pointer --- id=2 [master pointer (3)] ? ? Virtual core XTEST pointer --- id=4 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad --- id=13 [slave pointer (2)] grep 'touch\|mouse\|track\|synapt' installed-software libnetfilter-conntrack3 --- install libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install libxatracker1 --- install mousetweaks --- install printer-driver-ptouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-synaptics --- install xserver-xorg-input-vmmouse --- install cat /var/log/Xorg.0.log | grep -i synaptics [ 4.890] (II) LoadModule: "synaptics" [ 4.891] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.892] (II) Module synaptics: vendor="X.Org Foundation" [ 4.892] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 4.892] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.956] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 4.980] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154 [ 4.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found So, if all else fails, reinstall Linux :/

  Read the article

• Dual Screen will only mirror after 12.04 upgrade

  - by Ne0

  I have been using Ubuntu with a dual screen for years now, after upgrading to 12.04 LTS i cannot get my dual screen working properly Graphics: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV350 AR [Radeon 9600] (Secondary) I noticed i was using open source drivers and attempted to install official binaries using the methods in this thread. Output: liam@liam-desktop:~$ sudo apt-get install fglrx fglrx-amdcccle Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: fglrx fglrx-amdcccle 2 upgraded, 0 newly installed, 0 to remove and 12 not upgraded. Need to get 45.1 MB of archives. After this operation, 739 kB of additional disk space will be used. Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx i386 2:8.960-0ubuntu1 [39.2 MB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise/restricted fglrx-amdcccle i386 2:8.960-0ubuntu1 [5,883 kB] Fetched 45.1 MB in 1min 33s (484 kB/s) (Reading database ... 328081 files and directories currently installed.) Preparing to replace fglrx 2:8.951-0ubuntu1 (using .../fglrx_2%3a8.960-0ubuntu1_i386.deb) ... Removing all DKMS Modules Error! There are no instances of module: fglrx 8.951 located in the DKMS tree. Done. Unpacking replacement fglrx ... Preparing to replace fglrx-amdcccle 2:8.951-0ubuntu1 (using .../fglrx-amdcccle_2%3a8.960-0ubuntu1_i386.deb) ... Unpacking replacement fglrx-amdcccle ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Setting up fglrx (2:8.960-0ubuntu1) ... update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group i386-linux-gnu_gl_conf is broken. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-initramfs: deferring update (trigger activated) update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Loading new fglrx-8.960 DKMS files... Building only for 3.2.0-25-generic-pae Building for architecture i686 Building initial module for 3.2.0-25-generic-pae Done. fglrx: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-25-generic-pae/updates/dkms/ depmod....... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle (2:8.960-0ubuntu1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place liam@liam-desktop:~$ sudo aticonfig --initial -f aticonfig: No supported adapters detected When i attempt to get my settings back to what they were before upgrading i get this message requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) and GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: requested position/size for CRTC 81 is outside the allowed limit: position=(1440, 0), size=(1440, 900), maximum=(1680, 1680) Any idea's on what i need to do to fix this issue?

  Read the article

• 12.04 installation started to black screen during boot today

  - by Cedric

  NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

  Read the article

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• Project structure: where to put business logic

  - by Mister Smith

  First of all, I'm not asking where does business logic belong. This has been asked before and most answers I've read agree in that it belongs in the model: Where to put business logic in MVC design? How much business logic should be allowed to exist in the controller layer? How accurate is "Business logic should be in a service, not in a model"? Why put the business logic in the model? What happens when I have multiple types of storage? However people disagree in the way this logic should be distributed across classes. There seem to exist three major currents of thought: Fat model with business logic inside entity classes. Anemic model and business logic in "Service" classes. It depends. I find all of them problematic. The first option is what most Fowlerites stick to. The problem with a fat model is that sometimes a business logic funtion is not only related to a class, and instead uses a bunch of other classes. If, for example, we are developing a web store, there should be a function that calcs an order's total. We could think of putting this function inside the Order class, but what actually happens is that the logic needs to use different classes, not only data contained in the Order class, but also in the User class, the Session class, and maybe the Tax class, Country class, or Giftcard, Payment, etc. Some of these classes could be composed inside the Order class, but some others not. Sorry if the example is not very good, but I hope you understand what I mean. Putting such a function inside the Order class would break the single responsibility principle, adding unnecesary dependences. The business logic would be scattered across entity classes, making it hard to find. The second option is the one I usually follow, but after many projects I'm still in doubt about how to name the class or classes holding the business logic. In my company we usually develop apps with offline capabilities. The user is able to perform entire transactions offline, so all validation and business rules should be implemented in the client, and then there's usually a background thread that syncs with the server. So we usually have the following classes/packages in every project: Data model (DTOs) Data Access Layer (Persistence) Web Services layer (Usually one class per WS, and one method per WS method). Now for the business logic, what is the standard approach? A single class holding all the logic? Multiple classes? (if so, what criteria is used to distribute the logic across them?). And how should we name them? FooManager? FooService? (I know the last one is common, but in our case it is bad naming because the WS layer usually has classes named FooWebService). The third option is probably the right one, but it is also devoid of any useful info. To sum up: I don't like the first approach, but I accept that I might have been unable to fully understand the Zen of it. So if you advocate for fat models as the only and universal solution you are welcome to post links explaining how to do it the right way. I'd like to know what is the standard design and naming conventions for the second approach in OO languages. Class names and package structure, in particular. It would also be helpful too if you could include links to Open Source projects showing how it is done. Thanks in advance.

  Read the article

• ADF Enterprise Application Development - Made Simple (Book Review)

  - by Frank Nimphius

    Sten E. Vesterli wrote the "Oracle ADF Enterprise Application Development – Made Simple" book published by Packt Publishing in 2011 http://www.packtpub.com/oracle-adf-enterprise-application-development/book A common question on OTN, but also when talking to clients or customers is about where and how to start your ADF application development. Especially when the current programming background is not in Java, but 4 GL or PLSQL, developers often look for answers to the following questions: · How long does it take to learn Oracle ADF ? · How long does it take to replace a Forms application with ADF ? · How many developers do I need? · Do I need to know Java to use ADF and if yes, how good do I need to know this? · How do I structure my programming files, organizing them in JDeveloper work spaces, projects and libraries? · What is best practices for naming Java packages and how to void naming conflicts in ADF in general? · How many Application Modules do I need or should I create? · How to test applications? Sten Vesterli answers all of the above questions and more in his book http://www.packtpub.com/oracle-adf-enterprise-application-development/book , which makes it great value add to the 3 existing Oracle ADF books. In order of complexity (which also is the order in which reading the available Oracle ADF books makes sense), in my opinion, Sten's book should come second – though it also is useful to those that are already more advanced with Oracle ADF. So if you are absolutely new to Oracle ADF, then the order of books to read to get you up on an expert level should be: 1. Grant Ronald; "Quick Start Guide to Oracle Fusion Development: Oracle JDeveloper and Oracle ADF" (McGraw Hill 2010) 2. Sten Vesterli; "Oracle ADF Enterprise Application Development – Made Simple" (Packt Publishing 2011) 3. Duncan Mills, Peter Koletzke; " Oracle JDeveloper 11g Handbook: A Guide to Fusion Web Development" (McGraw Hill 2009) 4. Frank Nimphius, Lynn Munsinger; " Oracle Fusion Developer Guide: Building Rich Internet Applications with Oracle ADF Business Components and Oracle ADF Faces" (McGraw Hill 2010) If you are not new to Oracle ADF and Orace JDeveloper, then buy Sten Vesterli's book anyway. It is worth it and you want to have it on your book shelf. See below the table of content to get a better idea of what this book covers: · Chapter 1: The ADF Proof of Concept · Chapter 2: Estimating the Effort · Chapter 3: Getting Organized · Chapter 4: Productive Teamwork · Chapter 5: Prepare to Build · Chapter 6: Building the Enterprise Application · Chapter 7: Testing your Application · Chapter 8: Look and Feel · Chapter 9: Customizing the Functionality · Chapter 10: Securing your ADF Application · Chapter 11: Package and Deliver · Appendix: Internationalization The book is written with a lot of good humor, which makes the read very enjoyable (from a geek's perspective, of course). My favorite quote – just in case you are interested - is from page 97, when Sten talks about getting organized: " Stop sending e-mails to your team. Just stop it. E-mail is so last century.…" So true, so true! This quote's runner up is the "boss key" on page 128 where Sten talks about productivity and how Oracle Team Productivity Center (TPC) can help you with this. Quotes like these stick to your brains and make sure you never forget. Go for it!

  Read the article

• Required Parameters [SSIS Denali]

  - by jamiet

  SQL Server Integration Services (SSIS) in its 2005 and 2008 incarnations expects you to set a property values within your package at runtime using Configurations. SSIS developers tend to have rather a lot of issues with SSIS configurations; in this blog post I am going to highlight one of those problems and how it has been alleviated in SQL Server code-named Denali.   A configuration is a property path/value pair that exists outside of a package, typically within SQL Server or in a collection of one or more configurations in a file called a .dtsConfig file. Within the package one defines a pointer to a configuration that says to the package “When you execute, go and get a configuration value from this location” and if all goes well the package will fetch that configuration value as it starts to execute and you will see something like the following in your output log: Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:\Configs\MyConfig.dtsConfig". Unfortunately things DON’T always go well, perhaps the .dtsConfig file is unreachable or the name of the SQL Sever holding the configuration value has been defined incorrectly – any one of a number of things can go wrong. In this circumstance you might see something like the following in your log output instead: Warning: 0x80012014 at Package: The configuration file "C:\Configs\MyConfig.dtsConfig" cannot be found. Check the directory and file name. The problem that I want to draw attention to here though is that your package will ignore the fact it can’t find the configuration and executes anyway. This is really really bad because the package will not be doing what it is supposed to do and worse, if you have not isolated your environments you might not even know about it. Can you imagine a package executing for months and all the while inserting data into the wrong server? Sounds ridiculous but I have absolutely seen this happen and the root cause was that no-one picked up on configuration warnings like the one above. Happily in SSIS code-named Denali this problem has gone away as configurations have been replaced with parameters. Each parameter has a property called ‘Required’: Any parameter with Required=True must have a value passed to it when the package executes. Any attempt to execute the package will result in an error. Here we see that error when attempting to execute using the SSMS UI: and similarly when executing using T-SQL: Error is: Msg 27184, Level 16, State 1, Procedure prepare_execution, Line 112 In order to execute this package, you need to specify values for the required parameters.   As you can see, SSIS code-named Denali has mechanisms built-in to prevent the problem I described at the top of this blog post. Specifying a Parameter required means that any packages in that project cannot execute until a value for the parameter has been supplied. This is a very good thing. I am loathe to make recommendations so early in the development cycle but right now I’m thinking that all Project Parameters should have Required=True, certainly any that are used to define external locations should be anyway. @Jamiet

  Read the article

• Ubuntu 12.04 // Likewise Open // Unable to ever authenticate AD users

  - by Rob

  So Ubuntu 12.04, Likewise latest from the beyondtrust website. Joins domain fine. Gets proper information from lw-get-status. Can use lw-find-user-by-name to retrieve/locate users. Can use lw-enum-users to get all users. Attempting to login with an AD user via SSH generates the following errors in the auth.log file: Nov 28 19:15:45 hostname sshd[2745]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:15:45 hostname sshd[2745]: PAM adding faulty module: pam_winbind.so Nov 28 19:15:51 hostname sshd[2745]: error: PAM: Authentication service cannot retrieve authentication info for DOMAIN\\user.name from remote.hostname Nov 28 19:16:06 hostname sshd[2745]: Connection closed by 10.1.1.84 [preauth] Attempting to login via the LightDM itself generates similar errors in the auth.log file. Nov 28 19:19:29 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:29 hostname lightdm: PAM adding faulty module: pam_winbind.so Nov 28 19:19:47 hostname lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "DOMAIN\user.name" Nov 28 19:19:52 hostname lightdm: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:19:54 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:54 hostname lightdm: PAM adding faulty module: pam_winbind.so Attempting to login via a console on the system itself generates slightly different errors: Nov 28 19:31:09 hostname login[997]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:31:09 hostname login[997]: PAM adding faulty module: pam_winbind.so Nov 28 19:31:11 hostname login[997]: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:31:14 hostname login[997]: FAILED LOGIN (1) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info Nov 28 19:31:31 hostname login[997]: FAILED LOGIN (2) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info I am baffled. The errors obviously are correct, the file /lib/security/pam_winbind.so does not exist. If its a dependancy/required, surely it should be part of the package? I've installed/reinstalled, I've used the downloaded package from the beyondtrust website, i've used the repository, nothing seems to work, every method of installing this application generates the same errors for me. UPDATE : Hrmm, I thought likewise didn't use native winbind but its own modules. Installing winbind from apt-get uninstalls pbis-open (likewise) and generates failures when installing if pbis-open is installed first. Uninstalled winbind, reinstalled pbis-open, same issue as above. The file pam_winbind.so does not exist in that location. Setting up pbis-open-legacy (7.0.1.918) ... Installing Packages was successful This computer is joined to DOMAIN.LOCAL New libraries and configurations have been installed for PAM and NSS. Clearly it thinks it has installed it, but it hasn't. It may be a legacy issue with the previous attempt to configure domain integration manually with winbind. Does anyone have a working likewise-open installation and does the /etc/nsswitch.conf include references to winbind? Or do the /etc/pam.d/common-account or /etc/pam.d/common-password reference pam_winbind.so? I'm unsure if those entries are just legacy or setup by likewise. UPDATE 2 : Complete reinstall of OS fixed it and it worked seamlessly, like it was meant to and those 2 PAM files did NOT include entries for pam_winbind.so, so that was the underlying problem. Thanks for the assist.

  Read the article

• Guessing Excel Data Types

  - by AjarnMark

  Note to Self HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Jet\4.0\Engines\Excel: TypeGuessRows = 0 means scan everything. Note to Others About 10 years ago I stumbled across this bit of information just when I needed it and it saved my project.  Then for some reason, a few years later when it would have been nice, but not critical, for some reason I could not find it again anywhere.  Well, now I have stumbled across it again, and to preserve my future self from nightmares and sudden baldness due to pulling my hair out, I have decided to blog it in the hopes that I can find it again this way. Here’s the story…  When you query data from an Excel spreadsheet, such as with old-fashioned DTS packages in SQL 2000 (my first reference) or simply with an OLEDB Data Adapter from ASP.NET (recent task) and if you are using the Microsoft Jet 4.0 driver (newer ones may deal with this differently) then you can get funny results where the query reports back that a cell value is null even when you know it contains data. What happens is that Excel doesn’t really have data types.  While you can format information in cells to appear like certain data types (e.g. Date, Time, Decimal, Text, etc.) that is not really defining the cell as being of a certain type like we think of when working with databases.  But, presumably, to make things more convenient for the user (programmer) when you issue a query against Excel, the query processor tries to guess what type of data is contained in each column and returns it in an appropriate manner.  This is all well and good IF your data is consistent in every row and matches what the processor guessed.  And, for efficiency’s sake, when the query processor is trying to figure out each column’s data type, it does so by analyzing only the first 8 rows of data (default setting). Now here’s the problem, suppose that your spreadsheet contains information about clothing, and one of the columns is Size.  Now suppose that in the first 8 rows, all of your sizes look like 32, 34, 18, 10, and so on, using numbers, but then, somewhere after the 8th row, you have some rows with sizes like S, M, L, XL.  What happens is that by examining only the first 8 rows, the query processor inferred that the column contained numerical data, and then when it hits the non-numerical data in later rows, it comes back blank.  Major bummer, and a real pain to track down if you don’t know that Excel is doing this, because you study the spreadsheet and say, “the data is RIGHT THERE!  WHY doesn’t the query see it?!?!”  And the hair-pulling begins. So, what’s a developer to do?  One option is to go to the registry setting noted above and change the DWORD value of TypeGuessRows from the default of 8 to 0 (zero).  Setting this value to zero will force Jet to scan every row in the spreadsheet before making its determination as to what type of data the column contains.  And that means that in the example above, it would have treated the column as a string rather than as numeric, and presto! your query now returns all of the values that you know are in there. Of course, there is a caveat… if you are querying large spreadsheets, making Jet scan every row can be quite a performance hit.  You could enter a different number (more than 8) that you believe is a better sampling of rows to make the guess, but you still have the possibility that every row scanned looks alike, but that later rows are different, and that you might get blanks when there really is data there.  That’s the type of gamble, I really don’t like to take with my data. Anyone with a better approach, or with experience with more recent drivers that have a better way of handling data types, please chime in!

  Read the article

• What's New in Oracle's EPM System?

  - by jmorourke

  Oracle’s EPM System R11.1.2.2  is now generally available to customers and partners on the download center.  Although the release number doesn’t sound significant, this is a major release of Oracle’s Hyperion EPM Suite with new modules as well as significant enhancements across the suite.  This release was announced back on April 4th as part of Oracle’s Business Analytics Strategy launch, so analytics is a key aspect of the release.  But the three biggest pieces of news in this release are Oracle Hyperion Planning support for the Exalytics In-Memory Machine, the new Project Financial Planning Application and the new Account Reconciliations Manager module. The Oracle Exalytics In-Memory Machine was announced back in October 2011, at Oracle OpenWorld.  It’s the latest installment from Oracle in a line of engineered systems that combine Oracle Sun hardware, with Oracle database and application technologies – in solutions that are designed to provide high scalability and performance for specific tasks.  Exalytics is the first engineered system specifically designed for high performance analytics.  Running in-memory versions of Oracle Essbase, as well as the Oracle TimesTen database and Oracle BI tools, Exalytics provides speed of thought response times for complex analytic processes with advanced visualizations.  Early adopter customers have achieved 5X to 100X faster interactivity and 6X to 10X faster planning cycles.  Hyperion Planning running with Oracle Exalytics will support enterprise-wide planning, budgeting and forecasting with more detailed data, with hundreds to thousands of users across an organization getting speed of thought performance. The new Hyperion Project Financial Planning application delivered with EPM 11.1.2.2 is also great news for Oracle customers.  This application follows on the heels of other special-purpose planning applications that Oracle has delivered for Workforce and Capital Asset planning.  It allows Project Managers to identify project-related expenses and revenues, plan and propose new projects, and track results over time. Finance Managers can evaluate and compare different projects, manage the funding process, monitor and report the actual financial results and impacts of projects and project portfolios. This new application is applicable to capital projects, contract projects and indirect projects like IT and HR projects across all industries.  This application is a great complement to existing Project Management applications, and helps bridge the gap between these applications, and the financial planning and budgeting process. Account reconciliations has to be one of the biggest bottlenecks and risks in the financial close and reporting process, and many organizations rely on spreadsheets and manual processes to perform this critical process.  To help address this problem, Oracle developed an Account Reconciliation Manager module that is being delivered as part of Oracle Hyperion Financial Close Management.   This module helps automate and streamline account reconciliations and eliminates the chances for errors, omissions and fraud.  But unlike standalone account reconciliation packages, it’s integrated with the rest of the Oracle Hyperion Financial Close suite, and can integrate balances from any source system.  This can help alleviate a major bottleneck in the financial close process, increase accuracy and reduce risk, and can complement existing investments in Hyperion Financial Management, as well as Oracle and non-Oracle transaction processing systems. Other enhancements in this release include an enhanced Web 2.0 interface for Hyperion Planning and Hyperion Financial Management (HFM), configurable dimensionality in HFM, new Predictive Planning feature in Hyperion Planning, new Detailed Profitability feature in Hyperion Profitability and Cost Management, new Smart View interface for Hyperion Strategic Finance, and integration of the Hyperion applications with JD Edwards Financials. For more information about Oracle EPM System R11.1.2.2 check out the links below: Press Release:  http://www.oracle.com/us/corporate/press/1575775 Product Information on O.com:  http://www.oracle.com/us/solutions/business-analytics/overview/index.html Product Information on OTN:  http://www.oracle.com/technetwork/middleware/epm/downloads/index.html Webcast Replay:  http://www.oracle.com/us/go/index.html?Src=7317510&Act=65&pcode=WWMK11054701MPP046 Please contact me if you have any questions or need additional information – [email protected]

  Read the article

• Interrupted Upgrade from 11.10 to 12.04

  - by Tamil

  My upgrade using alternative iso from 11.10 to 12.04 got interrupted and I had to hard restart my machine. Now I feel that everything is recovered except my already installed packages like vim. How do I backup my home folder for fresh installation of ubuntu? Following are the errors I'm facing I couldn't mark any package for re-installation in synaptic or remove and install too. output of sudo apt-get install vim Building dependency tree Reading state information... Done Package vim is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'vim' has no installation candidate If I try installing it from synaptic I get apache2.2-common: Package apache2.2-common has no available version, but exists in the database. This typically means that the package was mentioned in a dependency and never uploaded, has been obsoleted or is not available with the contents of sources.list my sources.list file # added by the release upgrader # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # added by the release upgrader # # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110427.1)]/ natty main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main # deb http://tamil.3758_gmail.com:[email protected]/free unstable main # disabled on upgrade to oneiric # deb http://debian.datastax.com/natty oneiric main # disabled on upgrade to oneiric sudo apt-get update Err http://archive.ubuntu.com precise InRelease Err http://archive.canonical.com precise InRelease Err http://archive.ubuntu.com precise-updates InRelease Err http://archive.ubuntu.com precise-security InRelease Err http://extras.ubuntu.com precise InRelease Err http://archive.canonical.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-updates Release.gpg Unable to connect to 172.16.140.249:3142: Err http://extras.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-security Release.gpg Unable to connect to 172.16.140.249:3142: W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/InRelease

  Read the article

• How to install chrome autosave extension?

  - by Oguz Can Sertel

  I would like to install chrome autosave plugin on ubuntu. when I try to install it with these steps https://github.com/NV/chrome-devtools-autosave-server , I got some errors... there was not installed node and npm out of box on ubuntu 12.10. So I installed npm and node with these commands. sudo apt-get install npm sudo apt-get install node and I tried to install autosave here is the output: sudo npm install -g autosave npm http GET https://registry.npmjs.org/autosave npm http 304 https://registry.npmjs.org/autosave npm http GET https://registry.npmjs.org/commander npm http 304 https://registry.npmjs.org/commander /usr/local/bin/autosave -> /usr/local/lib/node_modules/autosave/bin/autosave > [email protected] install /usr/local/lib/node_modules/autosave > node ./scripts/install.js npm ERR! error installing [email protected] npm WARN This failure might be due to the use of legacy binary "node" npm WARN For further explanations, please read npm WARN /usr/share/doc/nodejs/README.Debian npm WARN npm ERR! [email protected] install: `node ./scripts/install.js` npm ERR! `sh "-c" "node ./scripts/install.js"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] install script. npm ERR! This is most likely a problem with the autosave package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./scripts/install.js npm ERR! You can get their info via: npm ERR! npm owner ls autosave npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.5.0-17-generic npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install" "-g" "autosave" npm ERR! cwd /home/naczu npm ERR! node -v v0.6.19 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] install: `node ./scripts/install.js` npm ERR! message `sh "-c" "node ./scripts/install.js"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/naczu/npm-debug.log npm not ok and here is README.debian nodejs for Debian ================= packaged modules ---------------- The global search path for modules is /usr/lib/nodejs Future packages of node modules will use that directory, so it should be used wisely. user modules ------------ Node looks for modules in ./node_modules directory first; please read node#modules documentation carefully for more information. Node does not look for modules in /usr/local/lib/node_modules, where npm put them. Please read npm-link(1) of npm package, to understand how to properly use npm-installed modules in a project. Note that require.paths is not supported in future node versions. See also node(1) for more information about NODE_PATH. nodejs command -------------- The upstream name for the Node.js interpreter command is "node". In Debian the interpreter command has been changed to "nodejs". This was done to prevent a namespace collision: other commands use the same name in their upstreams, such as ax25-node from the "node" package. Scripts calling Node.js as a shell command must be changed to instead use the "nodejs" command.

  Read the article

• SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

  - by jorg

  We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

  Read the article

• 10 Steps to access Oracle stored procedures from Crystal Reports

  Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

  Read the article

• Build-time dependency resolving coming to Entity Framework. Now, how about those BI tools too?

  - by jamiet

  Three months ago I wrote a blog post entitled Some thoughts on Visual Studio database references and how they should be used for SQL Server BI where I shared some thoughts on a feature available to database developers in Visual Studio 2010 that I would love to see added to SQL Server Integration Services (SSIS), Analysis Services (SSAS) and Reporting Services (SSRS). In there I said: Over the past few weeks I have been making heavy use of the Database tools in Visual Studio 2010 and one of the features that has most impressed me has been database references.   Database references allow you to have stored procedures in your database project that refer to objects (tables, views, stored procedures etc…) that exist in other database projects and hence when you build your database project it is able to resolve those references.   It occurred to me that similar functionality would be incredibly useful for SQL Server Integration Services(SSIS), Analysis Services (SSAS) & Reporting Services (SSRS) projects. After all reports, packages and data source views are rife with references to database objects – why shouldn’t we be able to have design-time dependency checking in our BI projects the same way that database and .Net developers do? In that blog post I shared links to three Connect submissions where I requested this feature be added to SSIS, SSAS & SSRS. In addition I also submitted a request that the feature be extended to .Net projects so that any reference to a database object in a .Net assembly can be resolved at build time. That Connect submission is at [Entity FX] Use database references to constrain the EDM and overnight it received this comment from Microsoft: We have been working on this feature for a while and and will be available soon This is really good news - it improves the Microsoft developer ecosystem by ensuring invalid references to database references get caught at build time (ideally as part of a Continuous integration build) rather than run time. [Hopefully it might nip this code-first nonsense in the bud too (Ooo...way to incite flame comments :) ) ]. If you want to see this feature in action then check out a video from Teched Europe last month entitled SQL Server Developer Tools Code-named "Juneau" where it is demo'd by Lance Delano and Tim Laverty.   The point of this blog post though is not just to draw attention to this forthcoming feature for .Net developers, it is to ask you to petition Microsoft to get this feature added to SSIS/SSAS/SSRS too. After all, we already know (from the video above) that the feature is coming to this new code-name Juneau development environment plus we also know that Juneau will be the development environment for SSIS/SSAS/SSRS as well - is it really much of a stretch to expect the BI tools to have access to this great feature too? I don't think so and if you agree with me then I urge you to vote and add a comment to the Connection submissions that are requesting this feature. They are at: [SSAS] Declare Object Dependancies [SSRS] Declare Object Dependancies [SSIS] Declare Object Dependancies (Update, Apparently someone at Microsoft has deemed it necassary to set this to private and I am not able to change it back even though I submitted it. You can still vote on the other two though.) Let's close that SQL Developer Gap!   @Jamiet    

  Read the article

• 10 Steps to access Oracle stored procedures from Crystal Reports

  Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

  Read the article

• Oracle Announces Release of PeopleSoft HCM 9.1 Feature Pack 2

  - by Jay Zuckert

  Big things sometimes come in small packages.  Today Oracle announced the availability of PeopleSoft HCM 9.1 Feature Pack 2 which delivers a new HR self service user experience that fundamentally changes the way managers and employees interact with the HCM system.  Earlier this year we reviewed a number of new concept designs with our Customer Advisory Boards.  With the accelerated feature pack development cycle we have adopted, these innovations are  now available to all 9.1 customers without the need for an upgrade.   There are no new products that need to be licensed for the capabilities below. For more details on Feature Pack 2, please see the Oracle press release. Included in Feature Pack 2 is a new search-based menu-free navigation that allows managers to search for employees by name and take actions directly from the secure search results.  For example, a manager can now simply type in part of an employee’s first or last name and receive meaningful results from documents related to performance, compensation, learning, recruiting, career planning and more.   Delivered actions can be initiated directly from these search results and the actions are securely tied to HCM security and user role.  The feature pack also includes new pages that will enable managers to be more productive by aggregating key employee data into a single page.  The new Manager Dashboard and Talent Summary provide a consolidated view of data related to a manager’s team and individual team members, respectively.   The Manager Dashboard displays information relevant to their direct reports including team learning, objective alignment, alerts, and pending approvals requiring their attention.  The Talent Summary provides managers with an aggregated view of talent management-related data for an individual employee including performance history, salary history, succession options, total rewards, and competencies.   The information displayed in both the Manager Dashboard and Talent Summary is configurable by system administrators and can be personalized by each of your managers. Other Feature Pack 2 enhancements allow organizations to administer Matrix or Dotted-Line Relationship Management, which addresses the challenge of tracking and maintaining project-based organizations that cut across the enterprise and geographic regions.  From within the Company Directory and Org Viewer organization charts, managers now have access to manager self-service transactions from related actions.  More than 70 manager and employee self-service transactions have been tied into the related action framework accessible from Org Viewer, Manager Dashboard, Talent Summary and Secure Enterprise Search (SES) results.  In addition to making it easier to access manager self-service transactions, the feature pack delivers streamlined transaction pages making everyday tasks such as promoting an employee faster and more efficient. With the delivery of PeopleSoft HCM 9.1 Feature Pack 2, Oracle continues to deliver on its commitment to our PeopleSoft customers.  With this feature pack, HCM 9.1 customers will be able to deploy the newest functionality quickly, without a major release upgrade, and realize added value from their existing PeopleSoft investment.    For customers newly deploying 9.1, a new download with all of Feature Pack 2  will be available early next year.   This will aslo include recertified upgrade paths from 8.8, 8.9 and 9.0, for customers in the upgrade process.

  Read the article

• Protecting Consolidated Data on Engineered Systems

  - by Steve Enevold

  In this time of reduced budgets and cost cutting measures in Federal, State and Local governments, the requirement to provide services continues to grow. Many agencies are looking at consolidating their infrastructure to reduce cost and meet budget goals. Oracle's engineered systems are ideal platforms for accomplishing these goals. These systems provide unparalleled performance that is ideal for running applications and databases that traditionally run on separate dedicated environments. However, putting multiple critical applications and databases in a single architecture makes security more critical. You are putting a concentrated set of sensitive data on a single system, making it a more tempting target.  The environments were previously separated by iron so now you need to provide assurance that one group, department, or application's information is not visible to other personnel or applications resident in the Exadata system. Administration of the environments requires formal separation of duties so an administrator of one application environment cannot view or negatively impact others. Also, these systems need to be in protected environments just like other critical production servers. They should be in a data center protected by physical controls, network firewalls, intrusion detection and prevention, etc Exadata also provides unique security benefits, including a reducing attack surface by minimizing packages and services to only those required. In addition to reducing the possible system areas someone may attempt to infiltrate, Exadata has the following features: 1.    Infiniband, which functions as a secure private backplane 2.    IPTables  to perform stateful packet inspection for all nodes               Cellwall implements firewall services on each cell using IPTables 3.    Hardware accelerated encryption for data at rest on storage cells Oracle is uniquely positioned to provide the security necessary for implementing Exadata because security has been a core focus since the company's beginning. In addition to the security capabilities inherent in Exadata, Oracle security products are all certified to run in an Exadata environment. Database Vault Oracle Database Vault helps organizations increase the security of existing applications and address regulatory mandates that call for separation-of-duties, least privilege and other preventive controls to ensure data integrity and data privacy. Oracle Database Vault proactively protects application data stored in the Oracle database from being accessed by privileged database users. A unique feature of Database Vault is the ability to segregate administrative tasks including when a command can be executed, or that the DBA can manage the health of the database and objects, but may not see the data Advanced Security  helps organizations comply with privacy and regulatory mandates by transparently encrypting all application data or specific sensitive columns, such as credit cards, social security numbers, or personally identifiable information (PII). By encrypting data at rest and whenever it leaves the database over the network or via backups, Oracle Advanced Security provides the most cost-effective solution for comprehensive data protection. Label Security  is a powerful and easy-to-use tool for classifying data and mediating access to data based on its classification. Designed to meet public-sector requirements for multi-level security and mandatory access control, Oracle Label Security provides a flexible framework that both government and commercial entities worldwide can use to manage access to data on a "need to know" basis in order to protect data privacy and achieve regulatory compliance  Data Masking reduces the threat of someone in the development org taking data that has been copied from production to the development environment for testing, upgrades, etc by irreversibly replacing the original sensitive data with fictitious data so that production data can be shared safely with IT developers or offshore business partners  Audit Vault and Database Firewall Oracle Audit Vault and Database Firewall serves as a critical detective and preventive control across multiple operating systems and database platforms to protect against the abuse of legitimate access to databases responsible for almost all data breaches and cyber attacks.  Consolidation, cost-savings, and performance can now be achieved without sacrificing security. The combination of built in protection and Oracle’s industry-leading data protection solutions make Exadata an ideal platform for Federal, State, and local governments and agencies.

  Read the article

• vmware player xorg driver broke after ubuntu 12.04 LTS automatic system update on 06/07/2014

  - by user291828

  I am running Ubuntu 12.04 LTS as a virtual machine on a Windows 7 host using vmware player 6.0.2. On Sat. 06/07/2014, Ubuntu performed an automatic system update as it does regularly, however after reboot, the display driver seems to be broken which causes the screen to split into many identical panels. This pretty much rendered the VM unusable. Below is the log entry for that update from /var/log/apt/history.log It appears that at least one of these updates have caused this problem. The exact same problem has been reported on the vmware forum as well, see https://communities.vmware.com/message/2388776#2388776 So far I have not been able so find a solution. Content in /var/log/apt/history.log Start-Date: 2014-06-07 15:04:46 Commandline: aptdaemon role='role-commit-packages' sender=':1.65' Install: linux-headers-3.2.0-64:amd64 (3.2.0-64.97), linux-image-3.2.0-64-generic:amd64 (3.2.0-64.97), linux-headers-3.2.0-64-generic:amd64 (3.2.0-64.97) Upgrade: iproute:amd64 (20111117-1ubuntu2.1, 20111117-1ubuntu2.3), libknewstuff3-4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeclarative5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukquery4a:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls-openssl27:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libthreadweaver4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdecore5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomukutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libktexteditor4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkmediaplayer4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkrosscore4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libgnutls26:amd64 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libgnutls26:i386 (2.12.14-5ubuntu3.7, 2.12.14-5ubuntu3.8), libsolid4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libnepomuk4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdnssd4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkparts4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdoctools:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl-dev:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl-doc:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libkidletime4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-headers-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), linux-image-generic:amd64 (3.2.0.63.75, 3.2.0.64.76), libkcmutils4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkfile4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkpty4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkntlm4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libplasma3:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkemoticons4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs-bin:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdewebkit5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsembed4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkio5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkjsapi4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), openssl:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), kdelibs5-data:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), linux-libc-dev:amd64 (3.2.0-63.95, 3.2.0-64.97), libkde3support4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libknotifyconfig4:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), kdelibs5-plugins:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkhtml5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdeui5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libkdesu5:amd64 (4.8.5-0ubuntu0.2, 4.8.5-0ubuntu0.3), libssl1.0.0:amd64 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14), libssl1.0.0:i386 (1.0.1-4ubuntu5.13, 1.0.1-4ubuntu5.14) End-Date: 2014-06-07 15:09:08

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >