Search Results

Search found 29814 results on 1193 pages for 'sql datetime'.

Page 163/1193 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

  • SQL transaction log backups conflicting with full backups?

    - by BradC
    On our SQL servers (2000, 2005, and 2008), we run full backups once a day in the evening, and transaction log backups every 2 hrs. We haven't really worried about these two processes conflicting, but lately we've run into some of the following issues: On one server, the trans log backup occasionally blocks the full backup, and must be manually stopped before the full backup can complete We sometimes end up with a massively-sized trans log backup file (sometimes larger than the full backup!) that seems to occur at the same time the full backup is running. I found a reference that indicate that these are "not allowed" to run at the same time, whatever that means: SQL 2000 Books Online and SQL 2005 Books Online. I'm not sure whether that means that the server will simply prevent them from running simultaneously, or if we ought to be explicitly stopping the log backups while the full backups are running. So are there known conflicts/issues between these? Does the answer differ between SQL versions? Should I have the trans log backup job check to see if the full backup is running before it executes? (and how do I do that...?)

    Read the article

  • Please advise on VPS config choice (with SQL Server Express)

    - by tjeuten
    Hi all, I might be interested in getting a VPS hosting plan for some small personal sites and .NET projects. Was thinking of Softsys Bronze Plan, as my current shared host plan is with them too. The stuff I want to host has grown beyond the capabilities of a Shared hosting plan, and I also want more control over the IIS/ASP.NET configuration, that's why I'm considering VPS. The main config details would be: Hyper-V 30 GB of diskspace 1 GB of RAM More info here: http://www.softsyshosting.com/Windows-VPS-HyperV.aspx Does anyone have experience with this plan (or something similar from another host), and maybe could answer these couple of questions: Bronze has a total diskspace of 30GB. Is the OS part of this quota or not ? If so, how much does a base configuration with Windows 2008 take up in diskspace ? Would you advise Windows 2008 R2 or Normal. Or would you advise to use Windows 2003 with this config. I'm planning on running a SQL Server Express install too. Would 1 GB of RAM be enough for both the Windows 2008 (R2) and SQL Express. The database load will not be that very high (a couple of 1000 records returned each day). The DB will most likely be far away from the 4GB limit, that's why I'd go for a SQL Express instead of paying extra licensing costs for a SQL Web install. But I'm more concerned about performance. Would you recommend Softsys as a VPS host ? I've been with them for one year for my Shared hosting plan, and have no complaints so far. Also, as I have no VPS experience, what are the pitfalls I need to be aware of, in terms of performance mainly, but maybe in other areas too ? Mathieu

    Read the article

  • SQL Server 2008 R2 mirroring failing

    - by andriusn
    I have two Windows 2008 R2 (Amazon EC2) instances running SQL Server 2008 R2. I use 9TB striped disks (9x1TB EBS volumes) for storage. One server is running as principal and second one as mirror. Both started from the same image, database and tlog files located on striped disk. Mirror server failed 3 times in last 2 months with errors: EventID 823 The operating system returned error 2(The system cannot find the file specified.) to SQL Server during a write at offset 0x00000048058a00 in file 'D:\TLogs***_log.ldf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. and EventID 1454 Database mirroring will be suspended. Server instance 'xxxxxxxxxx' encountered error 823, state 6, severity 24 when it was acting as a mirroring partner for database '***'. The database mirroring partners might try to recover automatically from the error and resume the mirroring session. For more information, view the error log for additional error messages. followed by EventID 19019 The MSSQLSERVER service terminated unexpectedly. After this rebooting instance is necessary to restore mirroring. First two times I thought it was hardware related (striped disk failure) and relaunched instance on new hardware. But the issue is back after few weeks again. It only affects mirror instances. Any help would be really appreciated. Thanks.

    Read the article

  • Can Sql Server 2005 Pivot table have nText passed into it?

    - by manemawanna
    Right bit of a simple question can I input nText into a pivot table? (SQL Server 2005) What I have is a table which records the answers to a questionnaire consisting of the following elements for example: UserID QuestionNumber Answer Mic 1 Yes Mic 2 No Mic 3 Yes Ste 1 Yes Ste 2 No Ste 3 Yes Bob 1 Yes Bob 2 No Bob 3 Yes With the answers being held in nText. Anyway what id like a Pivot table to do is: UserID 1 2 3 Mic Yes No Yes Ste Yes No Yes Bob Yes No Yes I have some test code, that creates a pivot table but at the moment it just shows the number of answers in each column (code can be found below). So I just want to know is it possible to add nText to a pivot table? As when I've tried it brings up errors and someone stated on another site that it wasn't possible, so I would like to check if this is the case or not. Just for further reference I don't have the opportunity to change the database as it's linked to other systems that I haven't created or have access too. Heres the SQL code I have at present below: DECLARE @query NVARCHAR(4000) DECLARE @count INT DECLARE @concatcolumns NVARCHAR(4000) SET @count = 1 SET @concatcolumns = '' WHILE (@count <=52) BEGIN IF @COUNT > 1 AND @COUNT <=52 SET @concatcolumns = (@concatcolumns + ' + ') SET @concatcolumns = (@concatcolumns + 'CAST ([' + CAST(@count AS NVARCHAR) + '] AS NVARCHAR)') SET @count = (@count+1) END DECLARE @columns NVARCHAR(4000) SET @count = 1 SET @columns = '' WHILE (@count <=52) BEGIN IF @COUNT > 1 AND @COUNT <=52 SET @columns = (@columns + ',') SET @columns = (@columns + '[' + CAST(@count AS NVARCHAR) + '] ') SET @count = (@count+1) END SET @query = ' SELECT UserID, ' + @concatcolumns + ' FROM( SELECT UserID, QuestionNumber AS qNum from QuestionnaireAnswers where QuestionnaireID = 7 ) AS t PIVOT ( COUNT (qNum) FOR qNum IN (' + @columns + ') ) AS PivotTable' select @query exec(@query)

    Read the article

  • Formatting datetime values returned in a SELECT..FOR XML statement

    - by TelJanini
    Consider the following table: Orders OrderId Date CustomerId 1000 2012-06-05 20:03:12.000 51 1001 2012-06-16 12:02:31.170 48 1002 2012-06-18 19:45:16.000 33 When I extract the Order data using FOR XML: SELECT OrderId AS 'Order/@Order-Id', Date AS 'Order/ShipDate', CustomerId AS 'Order/Customer' FROM Orders WHERE OrderId = 1000 FOR XML PATH ('') I get the following result: <Order Order-Id="1000"> <ShipDate>2010-02-20T16:03:12</ShipDate> <Customer>51</Customer> </Order> The problem is, the ShipDate value in the XML file needs to be in the format M/DD/YYYY H:mm:ss PM. How can I change the output of the ShipDate in the XML file to the desired format? Any help would be greatly appreciated!

    Read the article

  • Adding miliseconds to a datetime in tsql INSERT INTO

    - by DavRob60
    I'm doing a INSERT INTO query in order to initialize a new table. The primary key is RFQ_ID and Action_Time How could add 1 milisecond to each Action_Time on new record in order to avoid "Violation of PRIMARY KEY constraint" INSERT INTO QSW_RFQ_Log (RFQ_ID, Action_Time, Quote_ID) SELECT RFQ_ID , GETDATE() AS Action_Time , Quote_ID , 'Added to RFQ on Initialization' AS Note FROM QSW_Quote

    Read the article

  • How can I 'transpose' my data using SQL and remove duplicates at the same time?

    - by Remnant
    I have the following data structure in my database: LastName FirstName CourseName John Day Pricing John Day Marketing John Day Finance Lisa Smith Marketing Lisa Smith Finance etc... The data shows employess within a business and which courses they have shown a preference to attend. The number of courses per employee will vary (i.e. as above, John has 3 courses and Lisa 2). I need to take this data from the database and pass it to a webpage view (asp.net mvc). I would like the data that comes out of my database to match the view as much as possible and want to transform the data using SQl so that it looks like the following: LastName FirstName Course1 Course2 Course3 John Day Pricing Marketing Finance Lisa Smith Marketing Finance Any thoughts on how this may be achieved? Note: one of the reasons I am trying this approach is that the original data structure does not easily lend itself to be iterated over using the typical mvc syntax: <% foreach (var item in Model.courseData) { %> Because of the duplication of names in the orignal data I would end up with lots of conditionals in my View which I would like to avoid. I have tried transforming the data using c# in my ViewModel but have found it tough going and feel that I could lighten the workload by leveraging SQL before I return the data. Thanks.

    Read the article

  • What's the lowest cost, legal, Microsoft server stack you can assemble?

    - by McKAMEY
    Assuming that you have an app infrastructure that generally only requires: ASP.NET MVC / C# / .NET Database or NoSQL data store (must be accessible from C#) Here's the challenge to you server gods: What is the least expensive configuration that will allow you to deploy to production in a way that doesn't break any licensing rules? In what ways does this solution differ from the "standard" Microsoft deployment scenario? Where does this solution's performance break down once the app begins to scale? I'm not concerned about the hardware, only the server software itself. I would love to hear about any solutions you've personally put into production. Especially if they are unique alternatives. For ideas, consider some of the possible variations, a) any Microsoft server solutions where they have lowered the barrier to entry to compete with OSS, or b) any OSS alternatives to Microsoft products which perform at a similar level. An example of a): SQL Server 2008 Express Edition SP1 is a 100% free version of SQL Server which will scale to the needs of many smaller / early stage applications. An example of b): running the Mono Framework on Linux. An example of differing from the "standard" stack: running Mono on Linux will require a completely different server OS familiarity. None of the Windows-based knowledge really transfers. An example of breaking down under scale: SQL Server Express will only scale to 1GB of memory and 4GB of disk storage. After that point, the application will need to move to one of the paid versions of SQL Server.

    Read the article

  • Can't create add a SQL Server user: The login already has an account under a different user name.

    - by Zian Choy
    Environment: SQL Server 2005 Express Windows 7 When I installed SQL Server, I followed the instructions at http://msdn.microsoft.com/en-us/library/aa905868.aspx to set my computer's admin account as the SQL Server admin. However, when I try to access a database on my computer through Visual Studio 2008, I get the following error message: --------------------------- Microsoft Visual Studio --------------------------- The database 'Parkinsons' does not exist or you do not have permission to see it. Would you like to attempt to create it? --------------------------- Yes No --------------------------- Then, if I go to SQL Server and add a user to that database, I get the following error message: TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Create failed for User 'zian'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+User&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ The login already has an account under a different user name. (Microsoft SQL Server, Error: 15063) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=15063&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ Why doesn't VS piggy back on the dbo account? If the dbo account is unusable, then why won't SQL Server let me make an account so that I can access my own data?

    Read the article

  • SqlCe odd results why? -- Same SQL, different results in different apps. Issue with

    - by NitroxDM
    When I run this SQl in my mobile app I get zero rows. select * from inventory WHERE [ITEMNUM] LIKE 'PUMP%' AND [LOCATION] = 'GARAGE' When I run the same SQL in Query Analyzer 3.5 using the same database I get my expected one row. Why the difference? Here is the code I'm using in the mobile app: SqlCeCommand cmd = new SqlCeCommand(Query); cmd.Connection = new SqlCeConnection("Data Source="+filePath+";Persist Security Info=False;"); DataTable tmpTable = new DataTable(); cmd.Connection.Open(); SqlCeDataReader tmpRdr = cmd.ExecuteReader(); if (tmpRdr.Read()) tmpTable.Load(tmpRdr); tmpRdr.Close(); cmd.Connection.Close(); return tmpTable; UPDATE: For the sake of trying I used the code found in one of the answers found here and it works as expected. So my code looks like this: SqlCeConnection conn = new SqlCeConnection("Data Source=" + filePath + ";Persist Security Info=False;"); DataTable tmpTable = new DataTable(); SqlCeDataAdapter AD = new SqlCeDataAdapter(Query, conn); AD.Fill(tmpTable); The issue appears to be with the SqlCeDataReader. Hope this helps someone else out!

    Read the article

  • Win7 Credential manager and accessing SQL Server from outside of the domain

    - by David Lively
    My SQL Server is set to use windows authentication. If I am connected to the domain directly from my Win7 Ultimate x64 machine, SQL Management Studio (SSMS) will let me authenticate with Windows authentication. However, if I am connected via the VPN (from a different machine that is not joined to the domain), it won't. If I start SSMS with the following command line: C:\Windows\system32>runas /netonly /user:domainname\username "C:\Program Files (x86)\Microsoft SQL...\ssms.exe" then connecting to the SQL Server (which is in the domain) with Windows Authentication works fine. I'd like to save these credentials so that I don't have to launch SSMS from the command line, or modify the shortcut. I know I can use the SysInternals ShellRunAs extension to do this, but I again have to enter my domain username and password each time, and shift+right-click to see that menu option. The Windows Credential Manager seems designed to solve this problem, and works for network shares. However, it doesn't seem to work for SSMS. Any suggestions? I've tried using the /savecred option with runas to create the necessary credentials, but that appears to be incompatible with the /netonly option. Running the above command line with the addition of /savecred just displays the runas help screen. Grrr. Argh.

    Read the article

  • SQL Server Database In Single User Mode after Failover

    - by jlichauc
    Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

    Read the article

  • Grouping with operands question

    - by Filip
    I have a table: mysql> desc kursy_bid; +-----------+-------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-----------+-------------+------+-----+---------+-------+ | datetime | datetime | NO | PRI | NULL | | | currency | varchar(6) | NO | PRI | NULL | | | value | varchar(10) | YES | | NULL | | +-----------+-------------+------+-----+---------+-------+ 3 rows in set (0.01 sec) I would like to select some rows from a table, grouped by some time interval (can be one day) where I will have the first row and the last row of the group, the max(value) and min(value). I tried: select datetime, (select value order by datetime asc limit 1) open, (select value order by datetime desc limit 1) close, max(value), min(value) from kursy_bid_test where datetime > '2009-09-14 00:00:00' and currency = 'eurpln' group by month(datetime), day(datetime), hour(datetime); but the output is: | open | close | datetime | max(value) | min(value) | +--------+--------+---------------------+------------+------------+ | 1.4581 | 1.4581 | 2009-09-14 00:00:05 | 4.1712 | 1.4581 | | 1.4581 | 1.4581 | 2009-09-14 01:00:01 | 1.4581 | 1.4581 | As you see open and close is the same (but they shouldn't be). What should be the query to do what I want?

    Read the article

  • Using DateDiff in Entity Framwork on a SQL CE database

    - by deverop
    I have a method which should return a list of anonymous objects with a calculated column like this: var tomorrow = DateTime.Today.AddDays(1); return from t in this.Events where (t.StartTime >= DateTime.Today && t.StartTime < tomorrow && t.EndTime.HasValue) select new { Client = t.Activity.Project.Customer.Name, Project = t.Activity.Project.Name, Task = t.Activity.Task.Name, Rate = t.Activity.Rate.Name, StartTime = t.StartTime, EndTime = t.EndTime.Value, Hours = (System.Data.Objects.SqlClient.SqlFunctions.DateDiff("m", t.StartTime, t.EndTime.Value) / 60), Description = t.Activity.Description }; Unfortunately I get the following error from the DateDiff function: The specified method 'System.Nullable1[System.Int32] DateDiff(System.String, System.Nullable1[System.DateTime], System.Nullable`1[System.DateTime])' on the type 'System.Data.Objects.SqlClient.SqlFunctions' cannot be translated into a LINQ to Entities store expression. Any ideas what I could have done wrong here? EDIT: I also tried the EntityFunctions class mentioned here, but that did not work as well. Minutes = EntityFunctions.DiffMinutes(t.EndTime, t.StartTime),

    Read the article

  • Log Shipping breaking daily on SQL Server 2005

    - by IT2
    I am facing a somewhat serious problem with Log Shipping on SQL Server 2005 and I am having trouble to correct it, so I will try some help from SF's experts. I have a Windows 2003 Server (PROD) that ships transactional log backups to another two servers: STAND1: Windows 2003 Server with SQL Server 2005. STAND2: Windows 2008 R2 Server with SQL Server 2005. The problem is that Log Shipping to STAND2 is breaking for ~ 90 minutes some times of the day and returning back without intervention. The breaking occur at times when the backup file is larger (after reindexing, etc). I can see the message below logged on the COPY job: *** Error: The specified network name is no longer available The copy agent was breaking dozens times a day only to STAND2 server, and after the changes below "only" breaks ~ two times a day: The frequency of the backup job was changed from 5 minutes to 10 minutes. Instead of backing up the 4 databases to the same folder, the log backups are now saved on separated folders for each database. The backup job doesn't run 24hs now, and only for 14 hours a day, when people are working on the database. I configured the SQL Server instances on the three servers to limit the memory, leaving more memory to the OS. Now I don't know what to do. Any help will be much appreciated! Thanks!

    Read the article

  • Convert Date to Datetime field.

    - by infant programmer
    The argument my C# function is getting is a string which is merely a Date or a DateTime. I am suppose to convert this String to DateTime, to carry on furthure calculation. Now I need to test whether the incoming data is a Date, if it is date(examle:"12/31/2009"), then I need to add "00:00:00" (24 hours format) to it, so that it will become "12/31/2009 00:00:00". If string manipulation is one possible way, I want to confirm whether there is some other way where we can automate the testing and conversion within DateTime.TryParseExact() method. This is my sample C# code : (which is now only able to convert string of format "MM/dd/yyyy HH:mm:ss" to DateTime.) private static string[] formats = new string[] { "MM/dd/yyyy HH:mm:ss" }; public string date_conv(string date_str) { DateTime date_value; DateTime.TryParseExact(date_str, formats, new global::System.Globalization.CultureInfo("en-US"), global::System.Globalization.DateTimeStyles.None, out date_value); /*Some useful instruction to use date_value*/ return(date_value.ToString("MM/dd/yyyy HH:mm:ss")); }

    Read the article

  • How do I search a NTEXT column for XML attributes and update the values? MS SQL 2005

    - by Alan
    Duplicate: this exact question was asked by the same author in http://stackoverflow.com/questions/1221583/how-do-i-update-a-xml-string-in-an-ntext-column-in-sql-server. Please close this one and answer in the original question. I have a SQL table with 2 columns. ID(int) and Value(ntext) The value rows have all sorts of xml strings in them. ID Value -- ------------------ 1 <ROOT><Type current="TypeA"/></ROOT> 2 <XML><Name current="MyName"/><XML> 3 <TYPE><Colour current="Yellow"/><TYPE> 4 <TYPE><Colour current="Yellow" Size="Large"/><TYPE> 5 <TYPE><Colour current="Blue" Size="Large"/><TYPE> 6 <XML><Name current="Yellow"/><XML> How do I: A. List the rows where <TYPE><Colour current="Yellow", bearing in mind that there is an entry <XML><Name current="Yellow"/><XML> B. Modify the rows that contain <TYPE><Colour current="Yellow" to be <TYPE><Colour current="Purple" Thanks! 4 your help

    Read the article

  • Intermittent SQL Server ODBC Timeout expired

    - by Wili
    We have a bunch of VB6 applications that access two different database servers (both 32-bit windows 2003, one SQL Server 2000, one SQL Server 2005). About every ten minutes or so, we are getting a few errors: [Microsoft][ODBC SQL Server Driver]Timeout expired [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. [Microsoft][ODBC SQL Server Driver]ConnectionRead() This is happening on more than a dozen different computers at random times. We also have IP phones that all run through the same network and those are not having any problems. We can also VNC into a users computer and reproduce the error they were getting, but VNC still continues to work. Email also works. It just seems to be an ODBC connection to SQL Server that causes the issue. The errors happen for both of our SQL Servers. We have scoured google, but haven't been able to come up with a solution. Is there anything we can try to diagnose the problem? Is there any fix out there?

    Read the article

  • Is it possible to use SqlGeography with Linq to Sql?

    - by cofiem
    I've been having quite a few problems trying to use Microsoft.SqlServer.Types.SqlGeography. I know full well that support for this in Ling to Sql is not great. I've tried numerous ways, beginning with what would the expected way (Database type of geography, CLR type of SqlGeography). This produces the NotSupportedException, which is widely discussed via blogs. I've then gone down the path of treating the geography column as a varbinary(max), as geography is a UDT stored as binary. This seems to work fine (with some binary reading and writing extension methods). However, I'm now running into a rather obscure issue, which does not seem to have happened to many other people. System.InvalidCastException: Unable to cast object of type 'Microsoft.SqlServer.Types.SqlGeography' to type 'System.Byte[]'. This error is thrown from an ObjectMaterializer when iterating through a query. It seems to only occur when the tables containing geography columns are included in a query implicitly (ie. using the EntityRef<> properties to do joins). System.Data.Linq.SqlClient.ObjectReaderCompiler.ObjectReader`2.MoveNext() My question: If I'm retrieving the geography column as varbinary(max), I might expect the reverse error: can't cast byte[] to SqlGeography. That I would understand. This I don't. I do have some properies on the partial LINQ to SQL classes that hide the binary conversion... could those be the issue? Any help appreciated, and I know there's probably not enough information.

    Read the article

  • Processing a property in linq to sql

    - by Mostafa
    Hi It's my first LINQ TO SQL Project , So definitely my question could be naive . Till now I used to create new property in Business Object beside of every DateTime Property , That's because i need to do some processing in my DateTime property and show it in special string format for binding to UI Controls .Like : private DateTime _insertDate; /// /// I have "InertDate" field in my Table on Database /// public DateTime InsertDate { get { return _insertDate; } set { _insertDate = value; } } // Because i need to do some processing I create a readonly string property that pass InsertDate to Utility method and return special string Date public string PInsertDate { get { return Utility.ToSpecialDate(_insertDate); } } My question is I don't know how to do it in LINQ . I did like follow but i get run time error. ToosDataContext db = new ToosDataContext(); var newslist = from p in db.News select new {p.NewsId,p.Title,tarikh =MD.Utility.ToSpecialDate( p.ReleaseDate)}; GridView1.DataSource = newslist; GridView1.DataBind();

    Read the article

  • Microsoft SQL Server 2008 - 99% fragmentation on non-clustered, non-unique index

    - by user550441
    I have a table with several indexes (defined below). One of the indexes (IX_external_guid_3) has 99% fragmentation regardless of rebuilding/reorganizing the index. Anyone have any idea as to what might cause this, or the best way to fix it? We are using Entity Framework 4.0 to query this, the EF queries on the other indexed fields about 10x faster on average then the external_guid_3 field, however an ADO.Net query is roughly the same speed on both (though 2x slower than the EF Query to indexed fields). Table id(PK, int, not null) guid(uniqueidentifier, null, rowguid) external_guid_1(uniqueidentifier, not null) external_guid_2(uniqueidentifier, null) state(varchar(32), null) value(varchar(max), null) infoset(XML(.), null) -- usually 2-4K created_time(datetime, null) updated_time(datetime, null) external_guid_3(uniqueidentifier, not null) FK_id(FK, int, null) locking_guid(uniqueidentifer, null) locked_time(datetime, null) external_guid_4(uniqueidentifier, null) corrected_time(datetime, null) is_add(bit, not null) score(int, null) row_version(timestamp, null) Indexes PK_table(Clustered) IX_created_time(Non-Unique, Non-Clustered) IX_external_guid_1(Non-Unique, Non-Clustered) IX_guid(Non-Unique, Non-Clustered) IX_external_guid_3(Non-Unique, Non-Clustered) IX_state(Non-Unique, Non-Clustered)

    Read the article

  • SQL Server becomes slow after restart

    - by Tobi DM
    I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

    Read the article

  • Login failed for user 'XXX' on the mirrored sql server

    - by hp17
    Hello, We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

    Read the article

  • Datetime comparaison in CAML Query for Sharepoint

    - by Garcia Julien
    Hi, i'm trying to have some item from a sharepoint list, depends on date in a custom column. I've created my query with 2U2 Caml Builder, and that's worked but when I put it in my own code in my webpart, it always return to me all the items od the list. Here is my code: DateTime startDate = new DateTime(Int32.Parse(year), 1, 1); DateTime endDate = new DateTime(Int32.Parse(year), 12, 31); SPQuery q = new SPQuery(); q.Query = "<Query><Where><And><Geq><FieldRef Name='Publicate Date' /><Value IncludeTimeValue='FALSE' Type='DateTime'>" + SPUtility.CreateISO8601DateTimeFromSystemDateTime(startDate) + "</Value></Geq><Leq><FieldRef Name='Publicate_x0020_Date' /><Value IncludeTimeValue='FALSE' Type='DateTime'>" + SPUtility.CreateISO8601DateTimeFromSystemDateTime(endDate) + "</Value></Leq></And></Where></Query>"; SPListItemCollection allItem = library.GetItems(q);

    Read the article

  • How do I create a simple Windows form to access a SQL Server database?

    - by NoCatharsis
    I believe this is a very novice question, and if I'm using the wrong forum to ask, please advise. I have a basic understanding of databasing with MS SQL Server, and programming with C++ and C#. I'm trying to teach myself more by setting up my own database with MS SQL Server Express 2008 R2 and accessing it via Windows forms created in C# Express 2010. At this point, I just want to keep it to free or Express dev tools (not necessarily Microsoft though). Anyway, I created a database using the instructions provided here and I set the data types appropriately for each column (no errors in setup at least). Now I'm designing the GUI in C# Express but I've kind of hit a wall as far as the database connection. Is there a simple way to access the database I created locally using C# Express? Can anyone suggest a guide that has all this spelled out already? I am a self-learner so I look forward to teaching myself how to use these applications, but any pointers to start me off in the right direction would be greatly appreciated.

    Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >