Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 164/1518 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Dealing with Fine-Grained Cache Entries in Coherence

    - by jpurdy
    On occasion we have seen significant memory overhead when using very small cache entries. Consider the case where there is a small key (say a synthetic key stored in a long) and a small value (perhaps a number or short string). With most backing maps, each cache entry will require an instance of Map.Entry, and in the case of a LocalCache backing map (used for expiry and eviction), there is additional metadata stored (such as last access time). Given the size of this data (usually a few dozen bytes) and the granularity of Java memory allocation (often a minimum of 32 bytes per object, depending on the specific JVM implementation), it is easily possible to end up with the case where the cache entry appears to be a couple dozen bytes but ends up occupying several hundred bytes of actual heap, resulting in anywhere from a 5x to 10x increase in stated memory requirements. In most cases, this increase applies to only a few small NamedCaches, and is inconsequential -- but in some cases it might apply to one or more very large NamedCaches, in which case it may dominate memory sizing calculations. Ultimately, the requirement is to avoid the per-entry overhead, which can be done either at the application level by grouping multiple logical entries into single cache entries, or at the backing map level, again by combining multiple entries into a smaller number of larger heap objects. At the application level, it may be possible to combine objects based on parent-child or sibling relationships (basically the same requirements that would apply to using partition affinity). If there is no natural relationship, it may still be possible to combine objects, effectively using a Coherence NamedCache as a "map of maps". This forces the application to first find a collection of objects (by performing a partial hash) and then to look within that collection for the desired object. This is most naturally implemented as a collection of entry processors to avoid pulling unnecessary data back to the client (and also to encapsulate that logic within a service layer). At the backing map level, the NIO storage option keeps keys on heap, and so has limited benefit for this situation. The Elastic Data features of Coherence naturally combine entries into larger heap objects, with the caveat that only data -- and not indexes -- can be stored in Elastic Data.

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    Hi. I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • Cannot add Windows 7 client to SBS 2008

    - by Sandokan
    I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

    Read the article

  • Particle trajectory smoothing: where to do the simulation?

    - by nkint
    I have a particle system in which I have particles that are moving to a target and the new targets are received via network. The list of new target are some noisy coordinates of a moving target stored in the server that I want to smooth in the client. For doing the smoothing and the particle I wrote a simple particle engine with standard euler integration model. So, my pseudo code is something like that: # pseudo code class Particle: def update(): # do euler motion model integration: # if the distance to the target is more than a limit # add a new force to the accelleration # seeking the target, # and add the accelleration to velocity # and velocity to the position positionHistory.push_back(position); if history.length > historySize : history.pop_front() class ParticleEngine: particleById = dict() # an associative array # where the keys are the id # and particle istances are sotred as values # this method is called each time a new tcp packet is received and parsed def setNetTarget(int id, Vec2D new_target): particleById[id].setNewTarget(new_target) # this method is called each new frame def draw(): for p in particleById.values: p.update() beginVertex(LINE_STRIP) for v in p.positionHistory: vertex(v.x, v.y) endVertex() The new target that are arriving are noisy but setting some accelleration/velocity parameters let the particle to have a smoothed trajectories. But if a particle trajectory is a circle after a while the particle position converge to the center (a normal behaviour of euler integration model). So I decided to change the simulation and use some other interpolation (spline?) or smooth method (kalman filter?) between the targets. Something like: switch( INTERPOLATION_MODEL ): case EULER_MOTION: ... case HERMITE_INTERPOLATION: ... case SPLINE_INTERPOLATION: ... case KALMAN_FILTER_SMOOTHING: ... Now my question: where to write the motion simulation / trajectory interpolation? In the Particle? So I will have some Particle subclass like ParticleEuler, ParticleSpline, ParticleKalman, etc..? Or in the particle engine?

    Read the article

  • Windows 8.1 Update 1 Disk Usage 100%

    - by Gookjin Jeong
    Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

    Read the article

  • DPM - Monitoring is green, Protection has error and Latest rec point is old. How do I interpret that?

    - by LosManos
    How do I read the DPM info in this case? Monitoring says Failed but Protection shows Ok while having a Latest recovery point from last year. Under Monitoring tab I have Failed for Source | Computer | Protection group | Start time Computer\System Protection | MyServerName | Recovery point | 2014-06-09 19:00:00 which shows me that something happened last night. But under Protection tab everything is green. Here I have Protection group member | | Protection status Protection group ..name.. Computer: MyServerName Computer\System protection Bare metal recovery OK ... Latest recovery point: 2013-12-12 06:32:54 My guess is that backup failed last night once, but succeeded later. It then found out that there hasn't been any change since sometime last year and leave it be and flags Ok.

    Read the article

  • Impossible do find motherboard drivers to Dell Dimension 3000

    - by Masziej
    Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. Model 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

    Read the article

  • ql-server-2008 client Access license

    - by thushya
    Hi, case 1 : i have one user makes 10 connection from single computer, maximum number of connection at a given time = 10, what is the number CAL i need here ? case 2 : i have 10 users have access to only 1 computer, 10 user connect from single computer - maximum connection at any given time = 1, what is the number CAL i need here ? case 3 : i have 10 users using 10 computers, all 10 are making total of 5 connection maximum in any given time, what is the number of CAL i need here ? Thanks.

    Read the article

  • Screen randomly goes blue/black/white

    - by FubsyGamer
    Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

    Read the article

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Setting up a linux switch

    - by Shahmir Javaid
    I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

    Read the article

  • Interesting fault attempting to install Ubuntu 12.0.4.3 OR 13.10 on MSI GS70 2OD-001US

    - by cjaredrun
    Attempting to install Ubuntu on an MSI GS70 2OD-001US notebook pre-installed with Windows 8. For the record this is what I have attempted: All cases were attempted with Ubuntu 12.0.4.3 AND 13.10 images via USB drives Case 1 - Attempt no changes and simply boot from USB Result: It seems to want to work initially. The Ubuntu logo pops up and the dots start moving. After a few seconds the dots freeze and this screen is shown: http://i.imgur.com/C7pyMRk.jpg Case 2 - Start playing with BIOS - In Windows turning off fast boot - In BIOS turning off Secure boot - In BIOS turning off UEFI and selecting LEGACY Result: Brought to a black screen with a - blinking at me. Case 3 - Alternating BIOS settings - In Windows turning off fast boot - In BIOS turning off Secure boot - in BIOS turning off UEFI and selecting UEFI with CSM Result: Brought to a black screen no other indication of change. It's pretty frustrating to feel locked out of a laptop that I have paid good money for, I'm sure I am not alone in that case. It does however appear that there has been some success, so I am hopeful that someone might be able to help me. FYI: Dual booting is not necessary for me, if that helps at all... I'm not sure if this is a reasonable option, but if I completely wipe clean the hdds, no particle of Windows at all, would this still be a problem? Also would opening up the laptop and replacing the HDDS with brand new ones be a solution as well? Thanks for any input or suggestions.

    Read the article

  • Windows 7 random black screen when idle

    - by Omar
    Occasionally, when I'm away from my computer for about 5 minutes, the computer screen will go black and all USB devices (keyboard/mouse) will lose power. Attempting to move the mouse or pressing keys does not 'wake up' the computer. This only started happening a few days ago but I'm not sure what changes I did could have caused this and I uninstalled programs (one by one) I installed before it started happening, but still having the same issue. The one thing I noticed different about my computer since it started happening is i've been getting random survey popups from www.insightexpress.com. I ran Microsoft Security Essentials scan, it picked up some Java related malware, I removed it but still the same issue. I'm running MBAM right now and will run SAS after. Edit: I just updated drivers for motherboard and video card and ran virus scans, still having the same issue.

    Read the article

  • Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

    - by Synetech
    I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

    Read the article

  • My new SSD is causing issues. How can I solve them?

    - by Allan
    Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

    Read the article

  • Trick XP into having more RAM?

    - by Industrial
    Hi everyone, Are there any way known to trick an computer with XP to appear to have more RAM? I need to install a specific program (which fits in my system requirements), which is bundled with a number of other programs on an DVD. Unfortunately, the other programs besides the one that I need demand twice the amount of RAM that's available on my computer and the installation is closed due to this. Can I trick my XP computer into have more RAM temporarily to bypass the block in the install executable? Thanks

    Read the article

  • No keyboard after suspend, even after hard reset

    - by subatomics
    all. While I was using a Ubuntu 9.1 live CD, I put the computer (Toshiba Satellite C655) into standby. After I resumed, the keyboard stopped functioning, though the mouse (USB) still worked. I decided to turn off the computer, but after Ubuntu shuts down, it asks you to press "enter" to actually turn the machine off. The keyboard was still dead, so I all I could do was use the on/off switch to power down the computer. Now, when I try to boot the computer, nothing happens. Before this problem, I would see a menu asking me to select an OS (I had Windows 7 and Windows XP installed). I cannot use any emergency measures because I need to press F12 to boot from a CD, and the keyboard is still not working. I tried removing the HD to force a boot from the CD, but it didn't work. I also tried to plug in a USB keyboard, which failed as well. Right now, I have no idea how to fix this. Any ideas? Thanks.

    Read the article

  • Problems after installing a plethora of updates

    - by box
    yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

    Read the article

  • Strange RDP / Remote Desktop problem

    - by John Landheer
    I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

    Read the article

  • solving network connection problem on xp

    - by doug
    Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

    Read the article

  • What’s ‘default’ for?

    - by Strenium
    Sometimes there's a need to communicate explicitly that value variable is yet to be "initialized" or in other words - we’ve never changed it from its' default value. Perhaps "initialized" is not the right word since a value type will always have some sort of value (even a nullable one) but it's just that - how do we tell? Of course an 'int' would be 0, an 'enum' would the first defined value of a given enum and so on – we sure can make this kind of check "by hand" but eventually it would get a bit messy. There's a more elegant way with a use of little-known functionality of: 'default'Let’s just say we have a simple Enum: Simple Enum namespace xxx.Common.Domain{    public enum SimpleEnum    {        White = 1,         Black = 2,         Red = 3    }}   In case below we set the value of the enum to ‘White’ which happens to be a first and therefore default value for the enum. So the snippet below will set value of the ‘isDefault’ Boolean to ‘true’. 'True' Case SimpleEnum simpleEnum = SimpleEnum.White;bool isDefault; /* btw this one is 'false' by default */ isDefault = simpleEnum == default(SimpleEnum) ? true : false; /* default value 'white' */   Here we set the value to ‘Red’ and ‘default’ will tell us whether or not this the default value for this enum type. In this case: ‘false’. 'False' Case simpleEnum = SimpleEnum.Red; /* change from default */isDefault = simpleEnum == default(SimpleEnum) ? true : false; /* value is not default any longer */ Same 'default' functionality can also be applied to DateTimes, value types and other custom types as well. Sweet ‘n Short. Happy Coding!

    Read the article

  • List has no value after adding values in

    - by Sigh-AniDe
    I am creating a a ghost sprite that will mimic the main sprite after 10 seconds of the game. I am storing the users movements in a List<string> and i am using a foreach loop to run the movements. The problem is when i run through the game by adding breakpoints the movements are being added to the List<string> but when the foreach runs it shows that the list has nothing in it. Why does it do that? How can i fix it? this is what i have: public List<string> ghostMovements = new List<string>(); public void UpdateGhost(float scalingFactor, int[,] map) { // At this foreach, ghostMovements has nothing in it foreach (string s in ghostMovements) { // current position of the ghost on the tiles int mapX = (int)(ghostPostition.X / scalingFactor); int mapY = (int)(ghostPostition.Y / scalingFactor); if (s == "left") { switch (ghostDirection) { case ghostFacingUp: angle = 1.6f; ghostDirection = ghostFacingRight; Program.form.direction = ""; break; case ghostFacingRight: angle = 3.15f; ghostDirection = ghostFacingDown; Program.form.direction = ""; break; case ghostFacingDown: angle = -1.6f; ghostDirection = ghostFacingLeft; Program.form.direction = ""; break; case ghostFacingLeft: angle = 0.0f; ghostDirection = ghostFacingUp; Program.form.direction = ""; break; } } } } // The movement is captured here and added to the list public void captureMovement() { ghostMovements.Add(Program.form.direction); }

    Read the article

  • Cross-reference of computers having virtualization technology [closed]

    - by msorens
    When considering obtaining a new computer one of my prerequisites is the ability to load Windows 8 in a virtual machine (using VirtualBox). A prerequisite for that is that the host computer have virtualization technology. I located an Intel cross reference of chips having virtualization technology but I am trying to find a "higher level" cross reference between computer models and virtualization technology availability, skipping the extra step of having to first look up what CPU chip is in a machine, then cross-referencing that on Intel's list.

    Read the article

  • I cannot boot Ubuntu from WUBI install with windows 7, get an error message every time

    - by Tom
    i have tried several times to install ubuntu using wubi, i can't use a disc as i have a notebook computer and there is no optical drive. the download and installation all seem to work well but whenever i try to boot ubuntu at the windows 7/ubuntu menu it comes up with this error screen. I have used both the C: drive and the D: drive to install Ubuntu several times each, it's always unsuccessful. "Windows has failed to start. a recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer Choose your language settings and then click 'next' Click repair your computer. If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr Status: 0xc000000F Info: The selected entry could not be loaded because the application is missing or corrupt." I use an ASUS x501a with windows 7. What do i do to fix this? I want to be able to dual boot Windows 7 and ubuntu. Thanks a lot :)

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >