Search Results

Search found 31605 results on 1265 pages for 'internet explorer 11'.

Page 164/1265 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Using Linode as a proxy server wrapped in DNS to bypass paid internet services

  - by snihalani

  I have a linode server that I use for development. I was thinking of using that as a proxy server. I have noticed that most paid connections allow DNS queries but don't allow http until I pay them. I verified this by flushing my dns cache and nslookup some random websites. How do I create a proxy server that allows me to may be wrap my packets from my computer in DNS packets, relay to my linode server with ssh key authentication and act as a broker? Thanks.

  Read the article

• Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

  - by Jonah Goldstein

  I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

  Read the article

• VMWare guest OS internet access issues

  - by Qua Phan

  My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

  Read the article

• internet service providers

  - by gautam kumar

  I am unclear about the differences between international, national, regional and local ISPs. Please explain the differences and their importance, with examples. I am new to this site, so please forgive me if my question is not up to your expectations.

  Read the article

• How does TTL affect my internet connection?

  - by Luiscencio

  Each day I run pings to test latencies, but TTL is different every day, sometimes higher, sometimes lower. How does this affect my connection? Reply from 209.131.36.159: bytes=32 time=106ms TTL=52 Reply from 209.131.36.159: bytes=32 time=93ms TTL=52 Reply from 209.131.36.159: bytes=32 time=63ms TTL=52 Reply from 209.131.36.159: bytes=32 time=73ms TTL=52

  Read the article

• How to access website on localhost from internet?

  - by Nitesh Panchal

  Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

  Read the article

• Factors affecting internet response time in online gaming

  - by cornjuliox

  I frequently play games like Urban Terror and True Combat Elite, and I was wondering what factors come into play when calculating response time? Is it simply the distance between you and the server? Or does bandwidth fit in here somehow?

  Read the article

• sharing a folder between linux and windows over the internet

  - by valya

  Hello Currently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow. I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian. So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.

  Read the article

• Podcasting: Pipe internet audio to conference calls

  - by Mike Fielden

  I have a podcast and we use Skype and Audio Hijack to record all of us. How would I go about piping audio so the other people on the Skype conference call can hear it real time? I would like a software solution if possible. I realize they are several hardware solutions available.

  Read the article

• Best method of transferring files over internet?

  - by EsotericHabit

  I have a seedbox (running Ubuntu 9.10) at my (parent's) house and will be leaving it there once I go to college this fall. Currently I'm using samba to transfer files between computers, but I was wondering if once I am on my university's network, whether using FTP would be a better option versus samba over a VPN. The files will range from 100 MB to 17 GB, if that matters. Would one be more efficient over the other? Did I forget any other options?

  Read the article

• Mac internet problems

  - by Bradley Herman

  Our office is set up with mostly macs (7 of them) but we do have a windows laptop and a windows desktop on the network as well. The network is configured with a modem going into a switch/router throughout the office to the computers, along with a wireless router. Everything runs fine most of the time, but periodically while using the web, certain sites will stop loading and timeout repeatedly. This usually lasts 20 minutes or so and can be incredibly annoying. Resetting the modem/router and/or rebooting the computer never helps. The weirdest part is that in almost every case, the websites are fine on our Windows machines. I frequently use github, google, Stack Overflow, and jQuery reference and I can count on the sites being unavailable to me at least once a day. While I can't get them to load, I can spin my chair around to the windows server behind me and load the sites just fine. Any idea what the hell could be going on here?

  Read the article

• How private is the Opera Turbo feature of Opera?

  - by Marcus V

  If I'm using Opera with the Opera Turbo feature turned on (always, not set to "automaticly"). Can anyone see what sites I'm visiting (except Opera of course ...)? Opera Turbo uses a proxy server, so it should be that way, but as a not very technical person I'm not sure. Why do I want this? Well: nowadays, at least in my country, more and more (legal) open Wi-Fi connections are available. In those environments I like to have more privacy protections. I don't mind if they can see my IP address, but I just want to hide as much as I can of what I am doing. BTW: I don't care that they can see the data transferred; it doesn't have to be that secret. I only want to hide the requested Internet site links. BTW: I know that Opera Turbo only works with non-secure websites (HTTP), but that's fine for me. I only want it to work with these sites. BTW: I'm not need this for illegal purposes; I only want this for privacy reasons.

  Read the article

• Use telnet with Wireless Internet connection

  - by Mr. Man

  Is it possible to use telnet to connect to remote computers/hosts using only a WiFi connection and no direct connection to the modem except through the router? Thanks in advance!

  Read the article

• Managing a wireless internet connection

  - by cornjuliox

  I've just recently purchased a USB wi-fi adapter and have been using the software (for Windows XP) that comes with it to search for and connect to networks, but it's really quite slow and featureless. Are there free/OSS alternatives for Windows XP that can I can replace it with? Preferably something that can, in addition to connecting/searching for wireless networks, display stats like signal strength and transfer speeds on graphs so I can better monitor the quality of my connection?

  Read the article

• AFP / Apple Filling Protocol aka Netatalk access over Internet

  - by PJJ

  I got a simple cloud server and thought it would be nice to have mac native afp Volumes accesss. Installed Netatalk and this seems to work pretty nice. No sensitive data or something but I don't like to wake up someday and have my www docs rm-rfed by some kid h4x0r. Q1: Is afp encrypted? Q2: How can I make it (semi)secure? Q3: Does VPN makes sense for this? Q4: What would you do to get afp working over net? Opening any service meant for Lan only is a basic flaw, i know - but me be ignorant about it. According to Apple Dev only the authentication is encrypted or am I mssing something?

  Read the article

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• Cannot clear away BitDefender Internet Security system tray message

  - by unknown (google)

  I have BitDefender IS 2008 installed on my PC. In the last few days I have noticed the taskbar icon grumbling 1 issue requires your attention The Real-Time File Scanning is disabled and no amount of clicking "Fix" solved this issue. I have tried umpteen reboots and what have you. I really don't want to uninstall and re-install BitDefender (unless there's no other way out). How do I clear away the notification message?

  Read the article

• Which ports to open on domain vs internet

  - by zsharp

  I have a web server/database/domainController. I notice that ports 137 and 138 on the public IP AND private IP are open on all machines there are also other open ports on 0.0.0.0.(ie. 135, 2002) Can and should I close 137-139 on the public IP only? will that interfere with any services.

  Read the article

• Port Forwarding to put my web server on The Internet

  - by Chadworthington

  I went to http://canyouseeme.org/ to check to see what my external IP address. Regardless of what port I enter, it tells me that the port is blocked. I have a LinkSys router that basically has the default settings with the exception that I have WEP encrptin setup and I have forwarded a few ports, including 80 and 69. I forwarded them to the 192.x.x.103 IP address of the PC which is running IIS. That PC runs Symantec Endpoint Protection, which I right mouse clicked in the tray to Disable. These steps used to make my PC visible so I could host my own web site in IIS on port 80, or some other port, like 69. Yet, the Open Port tool cannot see my IP when it checks eiether port and when I navigate to http://my external ip/ I get "page cant be displayed" At first I was thinking that maybe Comcast is blocking port 80, but 69 doesnt work eiether. I do not see any other blockking set up in my router and, as I mentioned, I went with teh defaults except where discussed. This is a corporate PC and Symantec End Point Protecion is new to it (this previously worked on teh same PC with Symantec Protection Agent), but I thought that disabling Sym End Pt from the tray, that that would effectively neutralize it. I do not have the rights to kill the program itself. Any suggestions on what else to try to make my PC externally visible?

  Read the article

• unable to copy file to folder, permission denied without explanation

  - by ValekHalfHeart

  Recently Norton Internet security deleted ml.exe (an assembler I use to program in masm32) off of my computer, thinking that one of the programs I had written with it was a virus (it was most certainly not). Fortunately, I had a copy of ml.exe backed up in an external hard drive, and tried to copy it over to my computer. The old ml.exe was located in C:\masm32\bin, so I tried to copy the new one to that location. After disabling Norton (which had opened the folder and preventing me from accessing it), I am still unable to copy the new file to C:\masm32\bin. When I tried, Windows announced that I would need Administrator permission to copy the file. Since I'm an admin, I figured this wouldn't be a problem although it was unexpected, as I have never had to provide administrator permission to access this folder before. However, instead of prompting me to enter my password, Windows simply refuses to copy the file: I repeat, I was not asked to provide a password. It simply says that I do not have permission. Does anyone know what's happening and how to fix it? Is Norton still causing problems, or it something else?

  Read the article

• Slowdown upon router/modem setup change

  - by Ollie Saunders

  I’ve been using a Belkin FSD7632-4 modem router to connect to my TalkTalk provided ADSL internet connection for some time and been pretty happy with it. Recently, however, the connection has been failing and I decided to get a ASUS RT-N16 instead, which is also a much more capable router generally. The ASUS RT-N16 doesn’t come with a modem built-in so I purchased as Zoom modem as well. I’ve set them both up and am using them to post this message. But I’m a bit miffed to find that I get a significantly and consistently slower downstream rate from the new configuration than with the old Belkin. Belkin modem router: downstream: 3.45 mbps upstream: 0.73 mbps ASUS router + Zoom modem: downstream: 2.71 mbps upstream: 0.66 mbps Any ideas why this is? The really weird thing about this is that the Zoom supports ADSL2 and ADSL2+ but I don’t think the old Belkin does. At first I thought it might be due to the Zoom modem being limited to PPPoE instead of PPPoA, which my ISP supports, but then I tried using PPPoE with the Belkin and that still gave a high speed. I’m using VC-Mux encapsulation with both. VPI of 0 and VCI of 38. I pulled this data off the Zoom: Mode: ADSL2 Line Coding: Trellis On Status: No Defect Link Power State: L0 Downstream Upstream SNR Margin (dB): 12.3 11.8 Attenuation (dB): 43.0 24.9 Output Power (dBm): 12.9 0.0 Attainable Rate (Kbps): 3936 844 Rate (Kbps): 3194 840 MSGc (number of bytes in overhead channel message): 59 10 B (number of bytes in Mux Data Frame): 99 14 M (number of Mux Data Frames in FEC Data Frame): 2 16 T (Mux Data Frames over sync bytes): 1 8 R (number of check bytes in FEC Data Frame): 8 8 S (ratio of FEC over PMD Data Frame length): 1.9833 9.0594 L (number of bits in PMD Data Frame): 839 219 D (interleaver depth): 32 2 Delay (msec): 15 4 Super Frames: 15808 14078 Super Frame Errors: 0 4294967232 RS Words: 513778 111753 RS Correctable Errors: 126 4294967238 RS Uncorrectable Errors: 0 N/A HEC Errors: 0 4294967279 OCD Errors: 0 0 LCD Errors: 0 0 Total Cells: 1920175 237597 Data Cells: 205993 392 Bit Errors: 0 0 Total ES: 0 0 Total SES: 0 0 Total UAS: 34 0

  Read the article

• Locking down a server for shared internet hosting.

  - by Wil

  Basically I control several servers and I only host either static websites or scripts which I have designed, so I trust them up to a point. However, I have a few customers who want to start using scripts such as Wordpress or many others - and they want full control over their account. I have started to do the basics - like on php.ini, I have locked it down and restricted commands such as proc, however, there is obviously a lot more I can do. right now, using NTFS permissions, I am trying to lock down the server by running Application Pools and individual sites in their own user, however I feel like I am hitting brick walls... (My old question on Server Fault). At the moment, the only route I can think of is either to implement an off the shelf control panel - which will be expensive and quite frankly, over the top, or look at the Microsoft guide - which is really for an entire infrastructure, not for someone who just wants to lock down a few servers. Does anyone have any guides that can put me on the correct path?

  Read the article

• IP NAT pool range

  - by hfranco

  When is it necessary to setup a pool of more than one address? So if I have this ip pool range: ip nat pool demo 72.32.11.65 72.32.11.66 netmask 255.255.255.252 What's the difference if I just have one address? ip nat pool demo 72.32.11.65 72.32.11.65 netmask 255.255.255.252

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >