Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 164/243 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Graphics system failure

    - by anonymous coward
    I just upgraded two versions of Ubuntu to Oneiric after a recent set of updates broke Audacious 2.4.something in Maverick for me. When it was all finished my Asus Eee 1215N with the 1366x768 screen and the notoriously unsupported Nvidia Ion2 Optimus chipset was working on minimum compatibility fallbacks at 1024x768 resolution. So I did a little bit of reading (not enough) and tried deleting a couple parts of the graphics system to see if I could force a retry on the autodetection. The result: No graphical shell works now. Attempted so far: -reinstalling xorg/nouveau, didn't work. -installing bumblebee/nvidia-current, didn't work. -sudo dpkg-reconfigure -phigh -a, didn't work. I'd like to stress that this is otherwise a perfectly functional installation that I had spent some time setting up already (including a successful compile of Audacious 3.21 that was working with all the plugins). Is there a way for me to rebuild the graphics system from scratch or should I just give up, cry a little, backup data, wipe partition and reinstall with a USB drive?

    Read the article

  • Unable to boot: Missing Operating system

    - by Vivek S Panicker
    i had installed Ubuntu 11.10 along with the another Ubuntu 11.10 which already installed in my netbook. Later I formatted the partition I newly installed. Next time when I boot it went to Grub Rescue menu. I boot my system again with Ubuntu USB stick, Then I installed Boot repair package in USB and restored MBR and GRUB menu in hard disk. Now when I am restarting, I am getting a message Missing operating system, press any key to continue. Can somebody help me on this? Below is the output for sudo fdisk -l omitting empty partition (7) Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00058a60 Device Boot Start End Blocks Id System /dev/sda1 * 2048 204072287 102035120 83 Linux /dev/sda2 204072958 312580095 54253569 5 Extended /dev/sda5 310507520 312580095 1036288 82 Linux swap / Solaris /dev/sda6 308432896 310503423 1035264 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 4006 MB, 4006608896 bytes 124 heads, 62 sectors/track, 1017 cylinders, total 7825408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004d3df Device Boot Start End Blocks Id System /dev/sdb1 * 62 7818695 3909317 b W95 FAT32 Below is the output for sudo blkid /dev/loop0: TYPE="squashfs" /dev/loop1: LABEL="casper-rw" UUID="533defb1-f073-254a-b46f-7ca0ac1f4e0c" TYPE="ext2" /dev/sda1: LABEL="Ubuntu" UUID="6a141040-3ba8-457a-9de5-ad06e6057084" TYPE="ext4" /dev/sda5: UUID="3a7f62d6-9c65-4d12-a3b6-5d62b9710f7d" TYPE="swap" /dev/sda6: UUID="274da115-cec2-4418-a1af-88fe921e3670" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="EC22-6BE4" TYPE="vfat" File /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6a141040-3ba8-457a-9de5-ad06e6057084 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 6a141040-3ba8-457a-9de5-ad06e6057084 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • Bluetooth pairing of nokia with acer ubuntu 12.04

    - by Aneesh karthik C
    I have a Nokia 2700 classic phone. I tried installing obextool and Nokuntu. I run Nokuntu and find that every icon is enabled except for the Nokia Communication Centre, (it is greyed but is precisely what I need to be working!) I even tried connecting phone to laptop with a USB cable, and the same problem props up. I can also browse the contents of the phone as well as the memory card, in whichever way, either the Nautilus or Obextool file manager. The only issue that needs sorting is the communication centre.

    Read the article

  • Where is the "pysdm" package?

    - by John Boy
    I am new to Ubuntu. I have some old hardware lying around so I decided to build a backup/storage device. I am trying to follow this lifehacker article. It asks me to open a terminal and run sudo apt-get install pysdm. However, I keep getting Unable to locate package pysdm. Does anyone know where my pysdm is or where I can get one. I have run ubuntu from a usb key and have installed it on a hard drive and get the same message.

    Read the article

  • Is it possible to print to a Brother MFC-490CW that is conected to a LAN

    - by Johan Poelsma
    I have a Brother MFC-490CW printer that is connected to my LAN (wireless) and on which I can print with fine from Windows. From Ubuntu however, it does not seem to be possible. I downloaded and installed cups and lpd drivers from the Brother site and installed them. I get a Brother printer that says it is connected via USB. If I search for a network printer, my printer is shown. If I select it and select the correct driver, I can submit test pages. These pages are however not printed. What could be wrong. Should it really be that much harder then it is on Windows?

    Read the article

  • Can't convert .iso to .img on iMac G5

    - by user89004
    So I'm trying to create a bootable USB stick in order to install Ubuntu 12.04.1 on my iMac G5 running Mac OS X 10.4.11 but whenever I try to convert the downloaded .iso file into a .img, the .img.dmg file that the terminal creates just suddenly dissapears no matter where I select the output file to be. I tried hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso and also hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the exact same thing happens. I tried becoming root before I do all of this with sudo su but I still get the same results. The totally weird thing is that it works perfectly with Ubuntu Minimal .iso files. Could it be that the .iso I downloaded is corrupt?

    Read the article

  • HTG Explains: Is ReadyBoost Worth Using?

    - by Chris Hoffman
    Connect a USB stick to a Windows computer – even on Windows 8 – and Windows will ask if you want to speed up your system using ReadyBoost. But what exactly is ReadyBoost, and will it actually speed up your computer? ReadyBoost was introduced in Windows Vista, where it was a heavily promoted feature. Unfortunately, ReadyBoost isn’t a silver bullet that will make your computer faster, although it may be useful in some limited circumstances. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

    Read the article

  • Windows no longer boots on dual-boot system

    - by N Alex
    While trying to delete an Ubuntu partition from my hdd I accidentally rebooted my computer. (Note: the partition was originally made from an existing partition using paragon.) After that when I tried to start the computer I got the GRUB rescue terminal prompt. I wasn't able to do much from that, but I did manage to boot Ubuntu from a USB drive and to run boot-repair. But now when I try to select Windows 7 from the boot selection menu I get the error 0xc0000225. Here is the link to the BootInfo summary created by boot-repair: http://paste.ubuntu.com/1032584/ I have a lot of very important data on my hdd and I would really appreciate your help.

    Read the article

  • cant get ubuntu to work with windows 8

    - by John Mark High
    ive been trying to dual boot Ubuntu with windows 8 but so far I haven't been able too. the laptop im using is a HP Pavilion g6-2240sa pre-installed with windows 8. ive made the bootbale USB with Ubuntu 12.10, it installs but when I restart the computer boot straight into windows, no grub boot options. I can get into Ubuntu once by doing an advanced restart and booting from the Ubuntu partition. I can use Ubuntu fine but once I restart or shutdown, I do the advanced restart again and the Ubuntu partition is now gone and I have to reinstall. i used this tutorial to install Ubuntu, http://www.youtube.com/watch?v=wNCSbTyUzoM After i have to reinstall and still no grub boot menu, i used the boot repair to re-install it. once i rebooted the computer it went straight to windows again and the Ubuntu partition was gone. can i dual boot windows 8 and unbuntu 12.10 with the grub so i can pick what OS to boot into when the computer is starting, and without the partition going AWOL???? Thanks in advance

    Read the article

  • Unable to install Ubuntu 12.10 on windows 8 machine/ error no5

    - by JOBIN VARGHESE
    installing crashes at halfway of 'copying files' showing an i\o device error error no5; there was problem in beginning of installation too, ubuntu was not detecting the installed windows 8. my system is a dell inspiron 5520 laptop ,with 1 tb WDC hard disk in GPT ,with EFI . my current partition is like 102 mb EFI SYSTEM partition 200 gb Windows 8 ntfs 22 gb root Ext4 8 gb swap 20 db home Ext4 680 gb ntfs Drive for storing all my files. i tried both dvd disc and usb drive, both resulted in same error. inbuild dell hardware diagnosis utility showed both hard disk and dvd drive as healthy what may be the reason and how can i install ubuntu along side my windows 8?

    Read the article

  • Slow wifi with D-link DWA-160 A2

    - by Tommy Brunn
    I recently bought a USB wifi adapter for my new desktop computer. It's a D-link DWA-160 A2. From the start it didn't want to work at all, but after unplugging and then plugging it back in, it seems to work. However, my browsing is painfully slow. NetworkManager reports the connection to be at around 78-85% signal strength, which seems perfectly acceptable. Is there anything I can do to make it faster? I'm dual booting with Windows 7, where it seems to work fine, so I'm guessing that the problem occurs because of crappy drivers.

    Read the article

  • Will Ubuntu 12.04 work on an Acer Aspire One D257-1682?

    - by Avid
    Is it possible to install Ubuntu 12.04 on an Acer Aspire One D257-1682? I have a disc that I used to run Ubuntu 12.04 on my desktop without incident. When trying to run it on my Aspire One, using an external DVD drive via USB, I get a ton of errors about missing files while it tries to load Ubuntu. I found a list of which versions of Ubuntu to run depending on which Aspire One model you have, but the D257 was not listed at all. I want to have Ubuntu on my Aspire One for coding Java and C++ since I don't have to sit at my desk for hours. Please help! -Avid

    Read the article

  • sd card won't mount when an android phone is connected after 12.10 fresh install

    - by Mysterio
    I just upgraded to 12.10 via a fresh install. Mounting my Xperia Neo V in 12.04 worked flawlessly however I just discovered that the sd card can't be detected and mounted in 12.10. How can I solve this? Thanks in advance. P. S. I can mount it via a card reader though and it mounts ok in Windows 7. So it surely can't be hardware related. EDIT: Sony Ericsson Neo V running Android 2.3.4. USB mass storage is already turned on.

    Read the article

  • Boot path not found, cannot start OS

    - by Dustin
    My desktop is 12.04 64bit, and it cannot boot from the hard drive anymore. When I attempt to it just is stuck on a blank screen with an blinking dash, and nothing happens. I checked with the bios trouble shoot for problems and it said that no boot path could be found. I do not know why this is happening, but need to fix it because it used to boot up normally. What I need to know is how to fix it. I can boot into a live DVD. Also, there were a few boots I would attempt to boot into a live USB, then it would boot to the hard drive, but that does not work any more. So with the live DVD (it is an 10.04 LTS 32bit), is there any means to correct the boot path from the live DVD? Thank you for your time and answers.

    Read the article

  • How do I set up multi seat?

    - by JJ Mcfly
    Hi I was hoping to have a 2 seat setup. One will be for my TV just going to run Boxee. The other is for my main Desktop. I've been looking for a good guide to help me navigate this, I'd like to use ubuntu 10.10. I am assuming it's just a case of getting a box + 2 graphics adaptors and 2 usb mice and keyboards, one of which will be bluetooth for the TV. I can't seem to find much documentation on this idea. Can anyone point me in the right direction? Also I am assuming that this is all possible with a standard ubuntu install, but with some additional configuration. Thank you in advance for any advice you can offer me JJ Mcfly

    Read the article

  • Decrease mouse sensitivity below the standard limit.

    - by Bruce Connor
    I've got a USB mouse attached to my Ubuntu notebook. This mouse is (unfortunately) really sensitive, and so it sometimes gets hard to hit small icons with the mouse pointer. This is really a hardware issue, it's not a bug and it's not Ubuntu's/gnome's fault. Still, I would very much like to this issue through software (solving through hardware would imply buying a new mouse). Back in Windows, if I set the sensitivity as really low it was comfortable enough. In Ubuntu, even the lowest sensitivity and acceleration available (in the SystemPrerencesMouse menu) is still frustrating. How can I decrease it below the default minimum? I tried xset, but it seems xset only deals with acceleration and threshold, but not actual sensitivity.

    Read the article

  • Building lirc package from source with patches

    - by joystick
    I'd like to build latest lirc package for 12.04 with two patches from http://bit.ly/17779VW to make USB Infrared toy v2 work: Running sudo apt-build source lirc gave me ? build ll total 960 drwxr-xr-x 10 root root 4096 Nov 5 07:07 lirc-0.9.0 -rw-r--r-- 1 root root 113909 May 5 2011 lirc_0.9.0-0ubuntu1.debian.tar.gz -rw-r--r-- 1 root root 1553 May 5 2011 lirc_0.9.0-0ubuntu1.dsc -rw-r--r-- 1 root root 857286 May 5 2011 lirc_0.9.0.orig.tar.bz2 in /var/cache/apt-build/build. Running sudo apt-build build-source lirc then gave me Some error occured building package which is not really informative. I have successfully built patched lirc from source but now I would like to get a deb package. Where can I look for this 'some errors' in detail? Thank you, Alexei

    Read the article

  • Not able to install ubuntu 12.10

    - by Janet
    When I try to install Ubuntu on my computer I get this error: /var/cache/apt/archives/compiz-gnome_1% 3a0.9.8.4+brz 3412-0ubuntu0.1_i386.deb and /var/cache/apt/archives/metacity-common_1% 3a2.34.8-0ubuntu4_all.deb Ok, since I'm not a whiz at installing linux or understanding it...When these two things popped up it stated that the file was corrupted and there were too many errors to complete the install. Now, does that help? I had Ubuntu 12.04 LTS on my computer and wanted to upgrade, now I have nothing on my desktop and when I tried to install by using my usb pen, nothing happen and I also have it on dvd and tried to install from that and nothing still happen. So maybe someone can tell me why it's not installing on my desktop? I have it on my laptop with Windows.

    Read the article

  • Cannot Adjust Brightness on Acer Aspire 5332

    - by Laurens
    I recently installed Ubuntu 12.04 with the Windows installer. It appears to be running fine, however the screen is extremely dull and I don't appear to be able to adjust the brightness... I entered the settings and tried to play with the brightness there, however there is no change in apparent brightness whether it is set to high or low on the menu. I am using an Acer Aspire 5332 with Windows 7 Ultimate. It is worth noting that the original keyboard from the laptop no longer works, so I am using a USB keyboard (meaning that I don't have access to the Fn keys)...

    Read the article

  • What is Camera Raw, and Why Would a Professional Prefer it to JPG?

    - by Eric Z Goodnight
    A common setting on many digital cameras, RAW is a filetype option many professional photographers prefer over JPG, despite a huge disparity in filesize. Find out why, what RAW is, and how you can benefit using this professional quality filetype Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Enjoy Old School Style Video Game Fun with Chicken Invaders Hide the Twitter “Litter” in Twitter’s Sidebar Area (Chrome and Iron) Public Domain Day: Reflections on Copyright and the Importance of Public Domain Angry Birds Coming to PS3 and PSP This Week I Hate Mondays Wallpaper for That First Day Back at Work Tune Pop Enhances Android Music Notifications

    Read the article

  • Why do I need to relaunch dkpg-reconfigure keyboard-configuration after every startup?

    - by yves Baumes
    I've switched recently to an UK keyboard, from a FR keyboard. It is an usb keyboard, and first I plugged it in, I had to launch dpkg-reconfigure keyboard-configuration in order to request the correct layout (ie: uk). But after every reboot of the machine, the laytout comes back to the FR layout. How can I make the modification persisting? I am using Ubuntu, running the Stump Window Manager. And here is the /etc/default/keyboard at any time (that is right after startup, and before and after I run the dpkg-reconfigure tool) XKBMODEL="hhk" XKBLAYOUT="gb" XKBVARIANT="" XKBOPTIONS="terminate:ctrl_alt_bksp"

    Read the article

  • Problem with lucid install from ISO.

    - by joon
    Hi, I am trying to install Lucid from an iso (bios doesnt let me boot from USB and dvd drive is busted). I followed the instructions on the bottom of this page: ´The CD image approach´ https://help.ubuntu.com/community/Installation/FromWindows The ubuntu ALTERNATE iso is in my c: root dir. I even tried a fix that used to work in older versions (found on a forum) but that did nothing. What happens: - boot until the boot.ini menu - select install ubuntu - select install ubuntu again, I´m assuming this is grub - do some country settings,.. - harddrive is scanned for ISO image - not found, not even with thorough search...

    Read the article

  • How to share my wireless connection to other wireless devices

    - by user89464
    I am aware that I can share my wired internet connection to other devices wirelessly, but what I need now is a little more complex. I am limited to one device over the wifi but would like my macbook to have internet as well. It's in another room so ethernet is not really an option. I really would like to share the wireless from my ubuntu (it's on more) to other wireless devices. After some light googling I can't find anything even remotely useful as they all involve an ethernet cable at some point. Has anyone here had any luck with anything similar? I am running 12.04 LTS just for reference and have a Belkin G wireless USB device. If anyone knows a possible procedure I can find out about the chipset etc. if needed. I understand there may be hardware limitations.

    Read the article

  • How to Easily Share Files Between Nearby Computers

    - by Chris Hoffman
    It’s a common situation — you have several computers near each other and you want to transfer files between them. You don’t have to pull out a USB drive, nor do you have to send them over email — there are faster, easier ways. This is easier than it was in the past, as you don’t have to mess with any complicated Windows networking settings. There are lots of ways to share files, but we’ll cover some of the best.    

    Read the article

  • Which of VLC's dependencies causes sound device detection?

    - by Raphael
    I am setting up a headless music server based on the minimal Ubuntu image. After having installed the packages openssh-server,pulseaudio, libmad0,flac,liboff0,libid3tag0,libvorbis0a,ffmpeg, mpd,mpc,mpdscribble, paman,paprefs,pavumeter neither my internal soundcard nor the external DAC where detected by pulseaudio, that is pactl list did only list the dummy devices. Several reboots did not change that. The hardware devices are detected properly: ~$ lsusb | grep Texas Bus 002 Device 002: ID 08bb:2706 Texas Instruments Japan ~$ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Following a hunch, I installed vlc with all dependencies. After a reboot, both devices are detected! ~$ pactl list | grep "Sink: alsa_output" Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo Monitor of Sink: alsa_output.usb-Burr-Brown_from_TI_USB_Audio_DAC-00-DAC.analog-stereo Now I would like to remove VLC again but keep the devices. The question is: which of the many dependencies of VLC enables proper device detection? And why on earth is it not a dependency of pulseaudio?

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >