Search Results

Search found 5188 results on 208 pages for 'cross compilation'.

Page 165/208 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• .htaccess ignored, SPECIFIC to EC2 - not the usual suspects

  - by tedneigerux

  I run 8-10 EC2 based web servers, so my experience is many hours, but is limited to CentOS; specifically Amazon's distribution. I'm installing Apache using yum, so therefore getting Amazon's default compilation of Apache. I want to implement canonical redirects from non-www (bare/root) domain to www.domain.com for SEO using mod_rewrite BUT MY .htaccess FILE IS CONSISTENTLY IGNORED. My troubleshooting steps (outlined below) lead me to believe it's something specific to Amazon's build of Apache. TEST CASE Launch a EC2 Instance, e.g. Amazon Linux AMI 2013.03.1 SSH to the Server Run the commands: $ sudo yum install httpd $ sudo apachectl start $ sudo vi /etc/httpd/conf/httpd.conf $ sudo apachectl restart $ sudo vi /var/www/html/.htaccess In httpd.conf I changed the following, in the DOCROOT section / scope: AllowOverride All In .htaccess, added: (EDIT, I added RewriteEngine On later) RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] Permissions on .htaccess are correct, AFAI can tell: $ ls -al /var/www/html/.htaccess -rwxrwxr-x 1 git apache 142 Jun 18 22:58 /var/www/html/.htaccess Other info: $ httpd -v Server version: Apache/2.2.24 (Unix) Server built: May 20 2013 21:12:45 $ httpd -M Loaded Modules: core_module (static) ... rewrite_module (shared) ... version_module (shared) Syntax OK EXPECTED BEHAVIOR $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 ACTUAL BEHAVIOR $ curl -I domain.com HTTP/1.1 200 OK Date: Wed, 19 Jun 2013 12:34:10 GMT Server: Apache/2.2.24 (Amazon) Connection: close Content-Type: text/html; charset=UTF-8 TROUBLESHOOTING STEPS In .htaccess, added: BLAH BLAH BLAH ERROR RewriteCond %{HTTP_HOST} ^domain\.com$ [NC] RewriteRule ^/(.*) http://www.domain.com/$1 [R=301,L] My server threw an error 500, so I knew the .htaccess file was processed. As expected, it created an Error log entry: [Wed Jun 19 02:24:19 2013] [alert] [client XXX.XXX.XXX.XXX] /var/www/html/.htaccess: Invalid command 'BLAH BLAH BLAH ERROR', perhaps misspelled or defined by a module not included in the server configuration Since I have root access on the server, I then tried moving my rewrite rule directly to the httpd.conf file. THIS WORKED. This tells us several important things are working. $ curl -I domain.com HTTP/1.1 301 Moved Permanently Date: Wed, 19 Jun 2013 12:36:22 GMT Server: Apache/2.2.24 (Amazon) Location: http://www.domain.com/ Connection: close Content-Type: text/html; charset=UTF-8 HOWEVER, it is bothering me that it didn't work in the .htaccess file. And I have other use cases where I need it to work in .htaccess (e.g. an EC2 instance with named virtual hosts). Thank you in advance for your help.

  Read the article

• Which hardware to VM ratio for Build-Server virtualization?

  - by Martin

  Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

  Read the article

• These are few objective type questions which i was not able to find the solution [closed]

  - by Tarun

  1. Which of the following advantages does System.Collections.IDictionaryEnumerator provide over System.Collections.IEnumerator? a. It adds properties for direct access to both the Key and the Value b. It is optimized to handle the structure of a Dictionary. c. It provides properties to determine if the Dictionary is enumerated in Key or Value order d. It provides reverse lookup methods to distinguish a Key from a specific Value 2. When Implementing System.EnterpriseServices.ServicedComponent derived classes, which of the following statements are true? a. Enabling object pooling requires an attribute on the class and the enabling of pooling in the COM+ catalog. b. Methods can be configured to automatically mark a transaction as complete by the use of attributes. c. You can configure authentication using the AuthenticationOption when the ActivationMode is set to Library. d. You can control the lifecycle policy of an individual instance using the SetLifetimeService method. 3. Which of the following are true regarding event declaration in the code below? class Sample { event MyEventHandlerType MyEvent; } a. MyEventHandlerType must be derived from System.EventHandler or System.EventHandler<TEventArgs> b. MyEventHandlerType must take two parameters, the first of the type Object, and the second of a class derived from System.EventArgs c. MyEventHandlerType may have a non-void return type d. If MyEventHandlerType is a generic type, event declaration must use a specialization of that type. e. MyEventHandlerType cannot be declared static 4. Which of the following statements apply to developing .NET code, using .NET utilities that are available with the SDK or Visual Studio? a. Developers can create assemblies directly from the MSIL Source Code. b. Developers can examine PE header information in an assembly. c. Developers can generate XML Schemas from class definitions contained within an assembly. d. Developers can strip all meta-data from managed assemblies. e. Developers can split an assembly into multiple assemblies. 5. Which of the following characteristics do classes in the System.Drawing namespace such as Brush,Font,Pen, and Icon share? a. They encapsulate native resource and must be properly Disposed to prevent potential exhausting of resources. b. They are all MarshalByRef derived classes, but functionality across AppDomains has specific limitations. c. You can inherit from these classes to provide enhanced or customized functionality 6. Which of the following are required to be true by objects which are going to be used as keys in a System.Collections.HashTable? a. They must handle case-sensitivity identically in both the GetHashCode() and Equals() methods. b. Key objects must be immutable for the duration they are used within a HashTable. c. Get HashCode() must be overridden to provide the same result, given the same parameters, regardless of reference equalityl unless the HashTable constructor is provided with an IEqualityComparer parameter. d. Each Element in a HashTable is stored as a Key/Value pair of the type System.Collections.DictionaryElement e. All of the above 7. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. A Nullable type is a structure. c. An implicit conversion exists from any non-nullable value type to a nullable form of that type. d. An implicit conversion exists from any nullable value type to a non-nullable form of that type. e. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 8. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 9. Which of the following does using Initializer Syntax with a collection as shown below require? CollectionClass numbers = new CollectionClass { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 }; a. The Collection Class must implement System.Collections.Generic.ICollection<T> b. The Collection Class must implement System.Collections.Generic.IList<T> c. Each of the Items in the Initializer List will be passed to the Add<T>(T item) method d. The items in the initializer will be treated as an IEnumerable<T> and passed to the collection constructor+K110 10. What impact will using implicitly typed local variables as in the following example have? var sample = "Hello World"; a. The actual type is determined at compilation time, and has no impact on the runtime b. The actual type is determined at runtime, and late binding takes effect c. The actual type is based on the native VARIANT concept, and no binding to a specific type takes place. d. "var" itself is a specific type defined by the framework, and no special binding takes place 11. Which of the following is not supported by remoting object types? a. well-known singleton b. well-known single call c. client activated d. context-agile 12. In which of the following ways do structs differ from classes? a. Structs can not implement interfaces b. Structs cannot inherit from a base struct c. Structs cannot have events interfaces d. Structs cannot have virtual methods 13. Which of the following is not an unboxing conversion? a. void Sample1(object o) { int i = (int)o; } b. void Sample1(ValueType vt) { int i = (int)vt; } c. enum E { Hello, World} void Sample1(System.Enum et) { E e = (E) et; } d. interface I { int Value { get; set; } } void Sample1(I vt) { int i = vt.Value; } e. class C { public int Value { get; set; } } void Sample1(C vt) { int i = vt.Value; } 14. Which of the following are characteristics of the System.Threading.Timer class? a. The method provided by the TimerCallback delegate will always be invoked on the thread which created the timer. b. The thread which creates the timer must have a message processing loop (i.e. be considered a UI thread) c. The class contains protection to prevent reentrancy to the method provided by the TimerCallback delegate d. You can receive notification of an instance being Disposed by calling an overload of the Dispose method. 15. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 16. Which of the following scenarios are applicable to Window Workflow Foundation? a. Document-centric workflows b. Human workflows c. User-interface page flows d. Builtin support for communications across multiple applications and/or platforms e. All of the above 17. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is a private instance member with a leading underscore that can be programmatically referenced. c. The compiler generates a backing field that is accessible via reflection d. The compiler generates a code that will store the information separately from the instance to ensure its security. 18 While using the capabilities supplied by the System.Messaging classes, which of the following are true? a. Information must be explicitly converted to/from a byte stream before it uses the MessageQueue class b. Invoking the MessageQueue.Send member defaults to using the System.Messaging.XmlMessageFormatter to serialize the object. c. Objects must be XMLSerializable in order to be transferred over a MessageQueue instance. d. The first entry in a MessageQueue must be removed from the queue before the next entry can be accessed e. Entries removed from a MessageQueue within the scope of a transaction, will be pushed back into the front of the queue if the transaction fails. 19. Which of the following are true about declarative attributes? a. They must be inherited from the System.Attribute. b. Attributes are instantiated at the same time as instances of the class to which they are applied. c. Attribute classes may be restricted to be applied only to application element types. d. By default, a given attribute may be applied multiple times to the same application element. 20. When using version 3.5 of the framework in applications which emit a dynamic code, which of the following are true? a. A Partial trust code can not emit and execute a code b. A Partial trust application must have the SecurityCriticalAttribute attribute have called Assert ReflectionEmit permission c. The generated code no more permissions than the assembly which emitted it. d. It can be executed by calling System.Reflection.Emit.DynamicMethod( string name, Type returnType, Type[] parameterTypes ) without any special permissions Within Windows Workflow Foundation, Compensating Actions are used for: a. provide a means to rollback a failed transaction b. provide a means to undo a successfully committed transaction later c. provide a means to terminate an in process transaction d. achieve load balancing by adapting to the current activity 21. What is the proper declaration of a method which will handle the following event? Class MyClass { public event EventHandler MyEvent; } a. public void A_MyEvent(object sender, MyArgs e) { } b. public void A_MyEvent(object sender, EventArgs e) { } c. public void A_MyEvent(MyArgs e) { } d. public void A_MyEvent(MyClass sender,EventArgs e) { } 22. Which of the following controls allows the use of XSL to transform XML content into formatted content? a. System.Web.UI.WebControls.Xml b. System.Web.UI.WebControls.Xslt c. System.Web.UI.WebControls.Substitution d. System.Web.UI.WebControls.Transform 23. To which of the following do automatic properties refer? a. You declare (explicitly or implicitly) the accessibility of the property and get and set accessors, but do not provide any implementation or backing field b. You attribute a member field so that the compiler will generate get and set accessors c. The compiler creates properties for your class based on class level attributes d. They are properties which are automatically invoked as part of the object construction process 24. Which of the following are true about Nullable types? a. A Nullable type is a reference type. b. An implicit conversion exists from any non-nullable value type to a nullable form of that type. c. A predefined conversion from the nullable type S? to the nullable type T? exists if there is a predefined conversion from the non-nullable type S to the non-nullable type T 25. When using an automatic property, which of the following statements is true? a. The compiler generates a backing field that is completely inaccessible from the application code. b. The compiler generates a backing field that is accessible via reflection. c. The compiler generates a code that will store the information separately from the instance to ensure its security. 26. When using an implicitly typed array, which of the following is most appropriate? a. All elements in the initializer list must be of the same type. b. All elements in the initializer list must be implicitly convertible to a known type which is the actual type of at least one member in the initializer list c. All elements in the initializer list must be implicitly convertible to common type which is a base type of the items actually in the list 27. Which of the following is false about anonymous types? a. They can be derived from any reference type. b. Two anonymous types with the same named parameters in the same order declared in different classes have the same type. c. All properties of an anonymous type are read/write. 28. Which of the following are true about Extension methods. a. They can be declared either static or instance members b. They must be declared in the same assembly (but may be in different source files) c. Extension methods can be used to override existing instance methods d. Extension methods with the same signature for the same class may be declared in multiple namespaces without causing compilation errors

  Read the article

• WCF AuthenticationService in IIS7 Error

  - by germandb

  I have a WCF Server running on IIS 7 using default application pool, with SSL activate, the services is installed in a SBS Server 2008. I implement client application services with wcf and SQL 2005 for setting the access control in my application. The application run under windows vista and is make with WPF. In my developer machine the application and the WCF services run well, the IIS i'm use for the trials is the local IIS 7 and the database is the SQL Server 2005 database hosting in my server. I'm using Visual Studio Project Designer to enable and configure client application services. using https://localhost/WcfServidorFundacion. When i'm change the authentication services location to https://WcfServices:5659/WcfServidorFundacion and recompile the application, the following error show up. Message: The web service returned the error status code: InternalServerError. Details of service failure: {"Message":" Error while processing your request ","StackTrace":"","ExceptionType":""} Stack Trace: en System.Net.HttpWebRequest.GetResponse() en System.Web.ClientServices.Providers.ProxyHelper.CreateWebRequestAndGetResponse(String serverUri, CookieContainer& cookies, String username, String connectionString, String connectionStringProvider, String[] paramNames, Object[] paramValues, Type returnType) InnerException: System.Net.WebException Message="Remote Server Error: (500) Interal Server Error." I can access the WCF service from the navigator using the url mentioned above and even make a webReference in my project. I make a capture of the response but I'cant post it because i don't have 10 reputation points I activate the error log in the IIS 7 server, and the result is a Warning in the ManagedPipilineHandler. I appreciate if any one can help me Errors & Warnings No.? Severity Event Module Name 132. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName ManagedPipelineHandler Notification 128 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode La operación se ha completado correctamente. (0x0) Maybe this can help, is the web.config of my service <?xml version="1.0" encoding="utf-8"?> <!-- Nota: como alternativa para editar manualmente este archivo, puede utilizar la herramienta Administración de sitios web para configurar los valores de la aplicación. Utilice la opción Sitio Web->Configuración de Asp.Net en Visual Studio. Encontrará una lista completa de valores de configuración y comentarios en machine.config.comments, que se encuentra generalmente en \Windows\Microsoft.Net\Framework\v2.x\Config --> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <remove name="LocalMySqlServer" /> <remove name="LocalSqlServer" /> <add name="fundacionSelfAut" connectionString="Data Source=FUNDACIONSERVER/PRUEBAS;Initial Catalog=fundacion;User ID=wcfBaseDatos;Password=qwerty_2009;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <profile enabled="true" defaultProvider="SqlProfileProvider"> <providers> <clear /> <add name="SqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> <properties> <add name="FirstName" type="String" /> <add name="LastName" type="String" /> <add name="PhoneNumber" type="String" /> </properties> </profile> <roleManager enabled="true" defaultProvider="SqlRoleProvider"> <providers> <clear /> <add name="SqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> </roleManager> <membership defaultProvider="SqlMembershipProvider"> <providers> <clear /> <add name="SqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> <authentication mode="Forms" /> <compilation debug="true" strict="false" explicit="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </assemblies> </compilation> <!-- La sección <authentication> permite la configuración del modo de autenticación de seguridad utilizado por ASP.NET para identificar a un usuario entrante. --> <!-- La sección <customErrors> permite configurar las acciones que se deben llevar a cabo/cuando un error no controlado tiene lugar durante la ejecución de una solicitud. Específicamente, permite a los desarrolladores configurar páginas de error html que se mostrarán en lugar de un seguimiento de pila de errores. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <sessionState timeout="40" /> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom> <!-- La sección webServer del sistema es necesaria para ejecutar ASP.NET AJAX en Internet Information Services 7.0. Sin embargo, no es necesaria para la versión anterior de IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> <tracing> <traceFailedRequests> <add path="*"> <traceAreas> <add provider="ASP" verbosity="Verbose" /> <add provider="ASPNET" areas="Infrastructure,Module,Page,AppServices" verbosity="Verbose" /> <add provider="ISAPI Extension" verbosity="Verbose" /> <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module" verbosity="Verbose" /> </traceAreas> <failureDefinitions statusCodes="401.3,500,403,404,405" /> </add> </traceFailedRequests> </tracing> <security> <authorization> <add accessType="Allow" users="germanbarbosa,informatica" /> </authorization> <authentication> <windowsAuthentication enabled="false" /> </authentication> </security> </system.webServer> <system.web.extensions> <scripting> <webServices> <authenticationService enabled="true" requireSSL="true" /> <profileService enabled="true" readAccessProperties="FirstName,LastName,PhoneNumber" /> <roleService enabled="true" /> </webServices> </scripting> </system.web.extensions> <system.serviceModel> <services> <!-- this enables the WCF AuthenticationService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.AuthenticationService"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.AuthenticationService" /> </service> <!-- this enables the WCF RoleService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.RoleService"> <endpoint binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.RoleService" /> </service> <!-- this enables the WCF ProfileService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.ProfileService"> <endpoint binding="basicHttpBinding" bindingNamespace="http://asp.net/ApplicationServices/v200" bindingConfiguration="userHttps" contract="System.Web.ApplicationServices.ProfileService" /> </service> </services> <bindings> <basicHttpBinding> <!-- Set up a binding that uses Username as the client credential type --> <binding name="userHttps"> <security mode="Transport"> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="AppServiceBehaviors"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="SqlRoleProvider" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="SqlMembershipProvider" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel> </configuration>

  Read the article

• How do i return integers from a string ?

  - by kannan.ambadi

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Suppose you are passing a string(for e.g.: “My name has 1 K, 2 A and 3 N”)  which may contain integers, letters or special characters. I want to retrieve only numbers from the input string. We can implement it in many ways such as splitting the string into an array or by using TryParse method. I would like to share another idea, that’s by using Regular expressions. All you have to do is, create an instance of Regular Expression with a specified pattern for integer. Regular expression class defines a method called Split, which splits the specified input string based on the pattern provided during object initialization.     We can write the code as given below:   public static int[] SplitIdSeqenceValues(object combinedArgs)         {             var _argsSeperator = new Regex(@"\D+", RegexOptions.Compiled);               string[] splitedIntegers = _argsSeperator.Split(combinedArgs.ToString());               var args = new int[splitedIntegers.Length];               for (int i = 0; i < splitedIntegers.Length; i++)                 args[i] = MakeSafe.ToSafeInt32(splitedIntegers[i]);                           return args;         }    It would be better, if we set to RegexOptions.Compiled so that the regular expression will have performance boost by faster compilation.   Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Happy Programming  :))   

  Read the article

• WCF REST on .Net 4.0

  - by AngelEyes

  A simple and straight forward article taken from: http://christopherdeweese.com/blog2/post/drop-the-soap-wcf-rest-and-pretty-uris-in-net-4 Drop the Soap: WCF, REST, and Pretty URIs in .NET 4 Years ago I was working in libraries when the Web 2.0 revolution began.  One of the things that caught my attention about early start-ups using the AJAX/REST/Web 2.0 model was how nice the URIs were for their applications.  Those were my first impressions of REST; pretty URIs.  Turns out there is a little more to it than that. REST is an architectural style that focuses on resources and structured ways to access those resources via the web.  REST evolved as an “anti-SOAP” movement, driven by developers who did not want to deal with all the complexity SOAP introduces (which is al lot when you don’t have frameworks hiding it all).  One of the biggest benefits to REST is that browsers can talk to rest services directly because REST works using URIs, QueryStrings, Cookies, SSL, and all those HTTP verbs that we don’t have to think about anymore. If you are familiar with ASP.NET MVC then you have been exposed to rest at some level.  MVC is relies heavily on routing to generate consistent and clean URIs.  REST for WCF gives you the same type of feel for your services.  Let’s dive in. WCF REST in .NET 3.5 SP1 and .NET 4 This post will cover WCF REST in .NET 4 which drew heavily from the REST Starter Kit and community feedback.  There is basic REST support in .NET 3.5 SP1 and you can also grab the REST Starter Kit to enable some of the features you’ll find in .NET 4. This post will cover REST in .NET 4 and Visual Studio 2010. Getting Started To get started we’ll create a basic WCF Rest Service Application using the new on-line templates option in VS 2010: When you first install a template you are prompted with this dialog: Dude Where’s my .Svc File? The WCF REST template shows us the new way we can simply build services.  Before we talk about what’s there, let’s look at what is not there: The .Svc File An Interface Contract Dozens of lines of configuration that you have to change to make your service work REST in .NET 4 is greatly simplified and leverages the Web Routing capabilities used in ASP.NET MVC and other parts of the web frameworks.  With REST in .NET 4 you use a global.asax to set the route to your service using the new ServiceRoute class.  From there, the WCF runtime handles dispatching service calls to the methods based on the Uri Templates. global.asax using System; using System.ServiceModel.Activation; using System.Web; using System.Web.Routing; namespace Blog.WcfRest.TimeService {     public class Global : HttpApplication     {         void Application_Start(object sender, EventArgs e)         {             RegisterRoutes();         }         private static void RegisterRoutes()         {             RouteTable.Routes.Add(new ServiceRoute("TimeService",                 new WebServiceHostFactory(), typeof(TimeService)));         }     } } The web.config contains some new structures to support a configuration free deployment.  Note that this is the default config generated with the template.  I did not make any changes to web.config. web.config <?xml version="1.0"?> <configuration>   <system.web>     <compilation debug="true" targetFramework="4.0" />   </system.web>   <system.webServer>     <modules runAllManagedModulesForAllRequests="true">       <add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule,            System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />     </modules>   </system.webServer>   <system.serviceModel>     <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/>     <standardEndpoints>       <webHttpEndpoint>         <!--             Configure the WCF REST service base address via the global.asax.cs file and the default endpoint             via the attributes on the <standardEndpoint> element below         -->         <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/>       </webHttpEndpoint>     </standardEndpoints>   </system.serviceModel> </configuration> Building the Time Service We’ll create a simple “TimeService” that will return the current time.  Let’s start with the following code: using System; using System.ServiceModel; using System.ServiceModel.Activation; using System.ServiceModel.Web; namespace Blog.WcfRest.TimeService {     [ServiceContract]     [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]     [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]     public class TimeService     {         [WebGet(UriTemplate = "CurrentTime")]         public string CurrentTime()         {             return DateTime.Now.ToString();         }     } } The endpoint for this service will be http://[machinename]:[port]/TimeService.  To get the current time http://[machinename]:[port]/TimeService/CurrentTime will do the trick. The Results Are In Remember That Route In global.asax? Turns out it is pretty important.  When you set the route name, that defines the resource name starting after the host portion of the Uri. Help Pages in WCF 4 Another feature that came from the starter kit are the help pages.  To access the help pages simply append Help to the end of the service’s base Uri. Dropping the Soap Having dabbled with REST in the past and after using Soap for the last few years, the WCF 4 REST support is certainly refreshing.  I’m currently working on some REST implementations in .NET 3.5 and VS 2008 and am looking forward to working on REST in .NET 4 and VS 2010.

  Read the article

• Using jQuery, CKEditor, AJAX in ASP.NET MVC 2

  - by Ray Linder

  After banging my head for days on a “A potentially dangerous Request.Form value was detected" issue when post (ajax-ing) a form in ASP.NET MVC 2 on .NET 4.0 framework using jQuery and CKEditor, I found that when you use the following: Code Snippet $.ajax({     url: '/TheArea/Root/Add',     type: 'POST',     data: $("#form0Add").serialize(),     dataType: 'json',     //contentType: 'application/json; charset=utf-8',     beforeSend: function ()     {         pageNotify("NotifyMsgContentDiv", "MsgDefaultDiv", '<img src="/Content/images/content/icons/busy.gif" /> Adding post, please wait...', 300, "", true);         $("#btnAddSubmit").val("Please wait...").addClass("button-disabled").attr("disabled", "disabled");     },     success: function (data)     {         $("#btnAddSubmit").val("Add New Post").removeClass("button-disabled").removeAttr('disabled');         redirectToUrl("/Exhibitions");     },     error: function ()     {         pageNotify("NotifyMsgContentDiv", "MsgErrorDiv", '<img src="/Content/images/content/icons/cross.png" /> Could not add post. Please try again or contact your web administrator.', 6000, "normal");         $("#btnAddSubmit").val("Add New Post").removeClass("button-disabled").removeAttr('disabled');     } }); Notice the following: Code Snippet data: $("#form0Add").serialize(), You may run into the “A potentially dangerous Request.Form value was detected" issue with this. One of the requirements was NOT to disable ValidateRequest (ValidateRequest=”false”). For this project (and any other project) I felt it wasn’t necessary to disable ValidateRequest. Note: I’ve search for alternatives for the posting issue and everyone and their mothers continually suggested to disable ValidateRequest. That bothers me – a LOT. So, disabling ValidateRequest is totally out of the question (and always will be).  So I thought to modify how the “data: “ gets serialized. the ajax data fix was simple, add a .html(). YES!!! IT WORKS!!! No more “potentially dangerous” issue, ajax form posts (and does it beautifully)! So if you’re using jQuery to $.ajax() a form with CKEditor, remember to do: Code Snippet data: $("#form0Add").serialize().html(), or bad things will happen. Also, don’t forget to set Code Snippet config.htmlEncodeOutput = true; for the CKEditor config.js file (or equivalent). Example: Code Snippet CKEDITOR.editorConfig = function( config ) {     // Define changes to default configuration here. For example:     // config.language = 'fr';     config.uiColor = '#ccddff';     config.width = 640;     config.ignoreEmptyParagraph = true;     config.resize_enabled = false;     config.skin = 'kama';     config.enterMode = CKEDITOR.ENTER_BR;       config.toolbar = 'MyToolbar';     config.toolbar_MyToolbar =     [         ['Bold', 'Italic', 'Underline'],         ['JustifyLeft', 'JustifyCenter', 'JustifyRight', 'JustifyBlock', 'Font', 'FontSize', 'TextColor', 'BGColor'],         ['BulletedList', 'NumberedList', '-', 'Outdent', 'Indent'],         '/',         ['Scayt', '-', 'Cut', 'Copy', 'Paste', 'Find'],         ['Undo', 'Redo'],         ['Link', 'Unlink', 'Anchor', 'Image', 'Flash', 'HorizontalRule'],         ['Table'],         ['Preview', 'Source']     ];     config.htmlEncodeOutput = true; }; Happy coding!!! Tags: jQuery ASP.NET MVC 2 ASP.NET 4.0 AJAX

  Read the article

• Naming PowerPoint Components With A VSTO Add-In

  - by Tim Murphy

  Note: Cross posted from Coding The Document. Permalink Sometimes in order to work with Open XML we need a little help from other tools.  In this post I am going to describe  a fairly simple solution for marking up PowerPoint presentations so that they can be used as templates and processed using the Open XML SDK. Add-ins are tools which it can be hard to find information on.  I am going to up the obscurity by adding a Ribbon button.  For my example I am using Visual Studio 2008 and creating a PowerPoint 2007 Add-in project.  To that add a Ribbon Visual Designer.  The new ribbon by default will show up on the Add-in tab. Add a button to the ribbon.  Also add a WinForm to collect a new name for the object selected.  Make sure to set the OK button’s DialogResult to OK. In the ribbon button click event add the following code. ObjectNameForm dialog = new ObjectNameForm(); Selection selection = Globals.ThisAddIn.Application.ActiveWindow.Selection;   dialog.objectName = selection.ShapeRange.Name;   if (dialog.ShowDialog() == DialogResult.OK) { selection.ShapeRange.Name = dialog.objectName; } This code will first read the current Name attribute of the Shape object.  If the user clicks OK on the dialog it save the string value back to the same place. Once it is done you can retrieve identify the control through Open XML via the NonVisualDisplayProperties objects.  The only problem is that this object is a child of several different classes.  This means that there isn’t just one way to retrieve the value.  Below are a couple of pieces of code to identify the container that you have named. The first example is if you are naming placeholders in a layout slide. foreach(var slideMasterPart in slideMasterParts) { var layoutParts = slideMasterPart.SlideLayoutParts; foreach(SlideLayoutPart slideLayoutPart in layoutParts) { foreach (assmPresentation.Shape shape in slideLayoutPart.SlideLayout.CommonSlideData.ShapeTree.Descendants<assmPresentation.Shape>()) { var slideMasterProperties = from p in shape.Descendants<assmPresentation.NonVisualDrawingProperties>() where p.Name == TokenText.Text select p;   if (slideMasterProperties.Count() > 0) tokenFound = true; } } } The second example allows you to find charts that you have named with the add-in. foreach(var slidePart in slideParts) { foreach(assmPresentation.Shape slideShape in slidePart.Slide.CommonSlideData.ShapeTree.Descendants<assmPresentation.Shape>()) { var slideProperties = from g in slidePart.Slide.Descendants<GraphicFrame>() where g.NonVisualGraphicFrameProperties.NonVisualDrawingProperties.Name == TokenText.Text select g;   if(slideProperties.Count() > 0) { tokenFound = true; } } } Together the combination of Open XML and VSTO add-ins make a powerful combination in creating a process for maintaining a template and generating documents from the template.

  Read the article

• Using BPEL Performance Statistics to Diagnose Performance Bottlenecks

  - by fip

  Tuning performance of Oracle SOA 11G applications could be challenging. Because SOA is a platform for you to build composite applications that connect many applications and "services", when the overall performance is slow, the bottlenecks could be anywhere in the system: the applications/services that SOA connects to, the infrastructure database, or the SOA server itself.How to quickly identify the bottleneck becomes crucial in tuning the overall performance. Fortunately, the BPEL engine in Oracle SOA 11G (and 10G, for that matter) collects BPEL Engine Performance Statistics, which show the latencies of low level BPEL engine activities. The BPEL engine performance statistics can make it a bit easier for you to identify the performance bottleneck. Although the BPEL engine performance statistics are always available, the access to and interpretation of them are somewhat obscure in the early and current (PS5) 11G versions. This blog attempts to offer instructions that help you to enable, retrieve and interpret the performance statistics, before the future versions provides a more pleasant user experience. Overview of BPEL Engine Performance Statistics  SOA BPEL has a feature of collecting some performance statistics and store them in memory. One MBean attribute, StatLastN, configures the size of the memory buffer to store the statistics. This memory buffer is a "moving window", in a way that old statistics will be flushed out by the new if the amount of data exceeds the buffer size. Since the buffer size is limited by StatLastN, impacts of statistics collection on performance is minimal. By default StatLastN=-1, which means no collection of performance data. Once the statistics are collected in the memory buffer, they can be retrieved via another MBean oracle.as.soainfra.bpel:Location=[Server Name],name=BPELEngine,type=BPELEngine.> My friend in Oracle SOA development wrote this simple 'bpelstat' web app that looks up and retrieves the performance data from the MBean and displays it in a human readable form. It does not have beautiful UI but it is fairly useful. Although in Oracle SOA 11.1.1.5 onwards the same statistics can be viewed via a more elegant UI under "request break down" at EM -> SOA Infrastructure -> Service Engines -> BPEL -> Statistics, some unsophisticated minds like mine may still prefer the simplicity of the 'bpelstat' JSP. One thing that simple JSP does do well is that you can save the page and send it to someone to further analyze Follows are the instructions of how to install and invoke the BPEL statistic JSP. My friend in SOA Development will soon blog about interpreting the statistics. Stay tuned. Step1: Enable BPEL Engine Statistics for Each SOA Servers via Enterprise Manager First st you need to set the StatLastN to some number as a way to enable the collection of BPEL Engine Performance Statistics EM Console -> soa-infra(Server Name) -> SOA Infrastructure -> SOA Administration -> BPEL Properties Click on "More BPEL Configuration Properties" Click on attribute "StatLastN", set its value to some integer number. Typically you want to set it 1000 or more. Step 2: Download and Deploy bpelstat.war File to Admin Server, Note: the WAR file contains a JSP that does NOT have any security restriction. You do NOT want to keep in your production server for a long time as it is a security hazard. Deactivate the war once you are done. Download the bpelstat.war to your local PC At WebLogic Console, Go to Deployments -> Install Click on the "upload your file(s)" Click the "Browse" button to upload the deployment to Admin Server Accept the uploaded file as the path, click next Check the default option "Install this deployment as an application" Check "AdminServer" as the target server Finish the rest of the deployment with default settings Console -> Deployments Check the box next to "bpelstat" application Click on the "Start" button. It will change the state of the app from "prepared" to "active" Step 3: Invoke the BPEL Statistic Tool The BPELStat tool merely call the MBean of BPEL server and collects and display the in-memory performance statics. You usually want to do that after some peak loads. Go to http://<admin-server-host>:<admin-server-port>/bpelstat Enter the correct admin hostname, port, username and password Enter the SOA Server Name from which you want to collect the performance statistics. For example, SOA_MS1, etc. Click Submit Keep doing the same for all SOA servers. Step 3: Interpret the BPEL Engine Statistics You will see a few categories of BPEL Statistics from the JSP Page. First it starts with the overall latency of BPEL processes, grouped by synchronous and asynchronous processes. Then it provides the further break down of the measurements through the life time of a BPEL request, which is called the "request break down". 1. Overall latency of BPEL processes The top of the page shows that the elapse time of executing the synchronous process TestSyncBPELProcess from the composite TestComposite averages at about 1543.21ms, while the elapse time of executing the asynchronous process TestAsyncBPELProcess from the composite TestComposite2 averages at about 1765.43ms. The maximum and minimum latency were also shown. Synchronous process statistics <statistics>     <stats key="default/TestComposite!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestSyncBPELProcess" min="1234" max="4567" average="1543.21" count="1000">     </stats> </statistics> Asynchronous process statistics <statistics>     <stats key="default/TestComposite2!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestAsyncBPELProcess" min="2234" max="3234" average="1765.43" count="1000">     </stats> </statistics> 2. Request break down Under the overall latency categorized by synchronous and asynchronous processes is the "Request breakdown". Organized by statistic keys, the Request breakdown gives finer grain performance statistics through the life time of the BPEL requests.It uses indention to show the hierarchy of the statistics. Request breakdown <statistics>     <stats key="eng-composite-request" min="0" max="0" average="0.0" count="0">         <stats key="eng-single-request" min="22" max="606" average="258.43" count="277">             <stats key="populate-context" min="0" max="0" average="0.0" count="248"> Please note that in SOA 11.1.1.6, the statistics under Request breakdown is aggregated together cross all the BPEL processes based on statistic keys. It does not differentiate between BPEL processes. If two BPEL processes happen to have the statistic that share same statistic key, the statistics from two BPEL processes will be aggregated together. Keep this in mind when we go through more details below. 2.1 BPEL process activity latencies A very useful measurement in the Request Breakdown is the performance statistics of the BPEL activities you put in your BPEL processes: Assign, Invoke, Receive, etc. The names of the measurement in the JSP page directly come from the names to assign to each BPEL activity. These measurements are under the statistic key "actual-perform" Example 1:  Follows is the measurement for BPEL activity "AssignInvokeCreditProvider_Input", which looks like the Assign activity in a BPEL process that assign an input variable before passing it to the invocation:                                <stats key="AssignInvokeCreditProvider_Input" min="1" max="8" average="1.9" count="153">                                     <stats key="sensor-send-activity-data" min="0" max="1" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                 </stats> Note: because as previously mentioned that the statistics cross all BPEL processes are aggregated together based on statistic keys, if two BPEL processes happen to name their Invoke activity the same name, they will show up at one measurement (i.e. statistic key). Example 2: Follows is the measurement of BPEL activity called "InvokeCreditProvider". You can not only see that by average it takes 3.31ms to finish this call (pretty fast) but also you can see from the further break down that most of this 3.31 ms was spent on the "invoke-service".                                  <stats key="InvokeCreditProvider" min="1" max="13" average="3.31" count="153">                                     <stats key="initiate-correlation-set-again" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="invoke-service" min="1" max="13" average="3.08" count="153">                                         <stats key="prep-call" min="0" max="1" average="0.04" count="153">                                         </stats>                                     </stats>                                     <stats key="initiate-correlation-set" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="sensor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="update-audit-trail" min="0" max="2" average="0.03" count="153">                                     </stats>                                 </stats> 2.2 BPEL engine activity latency Another type of measurements under Request breakdown are the latencies of underlying system level engine activities. These activities are not directly tied to a particular BPEL process or process activity, but they are critical factors in the overall engine performance. These activities include the latency of saving asynchronous requests to database, and latency of process dehydration. My friend Malkit Bhasin is working on providing more information on interpreting the statistics on engine activities on his blog (https://blogs.oracle.com/malkit/). I will update this blog once the information becomes available. Update on 2012-10-02: My friend Malkit Bhasin has published the detail interpretation of the BPEL service engine statistics at his blog http://malkit.blogspot.com/2012/09/oracle-bpel-engine-soa-suite.html.

  Read the article

• Don’t miss rare Venus transit across Sun on June 5th. Once in a life time event.

  - by Gopinath

  Space lovers here is a rare event you don’t want to miss. On June 5th or 6th of 2012,depending on which part of the globe you live, the planet Venus will pass across Sun and it will not happen again until 2117. During the six hour long spectacular transit you can see the shadow of Venus cross Sun. The transit of Venus occurs in pairs eight years apart, with the previous one taking place in 2004. The next pair of transits occurs after 105.5 & 121.5 years later. The best place to watch the event would be a planetarium nearby with telescope facility. If not you watch it directly but must protect your eyes at all times with proper solar filters. Where can we see the transit? The transit of Venus is going to be clearly visible in Europe, Asia, United States and some part of Australia. Americans will be able to see transit in the evening of Tuesday, June 5, 2012. Eurasians and Africans can see the transit in the morning of June 6, 2012. At what time the event occurs? The principal events occurring during a transit are conveniently characterized by contacts, analogous to the contacts of an annular solar eclipse. The transit begins with contact I, the instant the planet’s disk is externally tangent to the Sun. Shortly after contact I, the planet can be seen as a small notch along the solar limb. The entire disk of the planet is first seen at contact II when the planet is internally tangent to the Sun. Over the course of several hours, the silhouetted planet slowly traverses the solar disk. At contact III, the planet reaches the opposite limb and once again is internally tangent to the Sun. Finally, the transit ends at contact IV when the planet’s limb is externally tangent to the Sun. Event Universal Time Contact I 22:09:38 Contact II 22:27:34 Greatest 01:29:36 Contact III 04:31:39 Contact IV 04:49:35   Transit of Venus animation Here is a nice video animation on the transit of Venus Map courtesy of Steven van Roode, source NASA

  Read the article

• Connecting to DB2 from SSIS

  - by Christopher House

  The project I'm currently working on involves moving various pieces of data from a legacy DB2 environment to some SQL Server and flat file locations.  Most of the data flows are real time, so they were a natural fit for the client's MQSeries on their iSeries servers and BizTalk to handle the messaging.  Some of the data flows, however, are daily batch type transmissions.  For the daily batch transmissions, it was decided that we'd use SSIS to pull the data direct from DB2 to either a SQL Server or flat file.  I'm not at all an SSIS guy, I've done a bit here and there, but mainly for situations were we needed to move data from a dev environment to QA, mostly informal stuff like that.  And, as much as I'm not an SSIS guy, I'm even less a DB2/iSeries guy.  Prior to this engagement, my knowledge of DB2 was limited to the fact that it's an IBM product and that it was probably a DBMS flatform (that's what the DB in DB2 means, right?).   One of my first goals when I came onto this project was to develop of POC SSIS package to pull some data from DB2 and dump it to a flat file.  It sounded like a pretty straight forward task.  As always, the devil is in the details.  Configuring the DB2 connection manager took a bit of trial and error.  As such, I thought I'd post my experiences here in hopes that they might save someone the efforts I went through.  That being said, please keep in mind, as I pointed out, I'm not at all a DB2 guy, so my terminology and explanations may not be 100% spot on. Before you get started, you need to figure out how you're going to connect to DB2.  From the research I did, it looks like there are a few options.  IBM has both an OLE DB and .Net data provider which can be found here.  I installed their client access tools and tried to use both the .Net and OLE DB providers but I received an error message from both when attempting to connect to the iSeries that indicated I needed a license for a product called DB2 Connect.  I inquired with one of my client's iSeries resources about a license for this product and it appears they didn't have one, so that meant the IBM drivers were out.  The other option that I found quite a bit of discussion around was Microsoft's OLE DB Provider for DB2.  This driver is part of the feature pack for SQL Server 2008 Enterprise Edition and can be downloaded here. As it turns out, I already had Microsoft's driver installed on my dev VM, which stuck me as odd since I hadn't installed it.  I discovered that the driver is installed with the BizTalk adapter pack for host systems, which was also installed on my VM.  However, it looks like the version used by the adapter pack is newer than the version provided in the SQL Server feature pack.   Once you get the driver installed, create a connection manager in your package just like you normally would and select the Microsoft OLE DB Provider for DB2 from the list of available drivers. After you select the driver, you'll need to enter in your host name, login credentials and initial catalog. A couple of things to note here.  First, the Initial catalog needs to be the same as your host name.  Not sure why that is, but trust me, it just does.  Second, for credentials, in my environment, we're using what the client's iSeries people refer to as "profiles".  I guess this is similar to SQL auth in the SQL Server world.  In other words, they've given me a username and password for connecting to DB, so I've entered it here. Next, click the Data Links button.  On the Data Links screen, enter your package collection on the first tab. Package collection is one of those DB2 concepts I'm still trying to figure out.  From the little bit I've read, packages are used to control SQL compilation and each DB2 connection needs one.  The package collection, I believe, controls where your package is created.  One of the iSeries folks I've been working with told me that I should always use QGPL for my package collection, as QGPL is "general purpose" and doesn't require any additional authority. Next click the ellipsis next to the Network drop-down.  Here you'll want to enter your host name again. Again, not sure why you need to do this, but trust me, my connection wouldn't work until I entered my hostname here. Finally, go to the Advanced tab, select your DBMS platform and check Process binary as character. My environment is DB2 on the iSeries and iSeries is the replacement for AS/400, so I selected DB2/AS400 for my platform.  Process binary as character was necessary to handle some of the DB2 data types.  I had a few columns that showed all their data as "System.Byte[]".  Checking Process binary as character resolved this. At this point, you should be good to go.  You can go back to the Connection tab on the Data Links dialog to perform a couple of tests to validate your configuration.  The Test Connection button is obvious, this just verifies you can connect to the host using the configuration data you've entered.  The Packages button will attempt to connect to the host and create the packages required to execute queries. This isn't meant to be a comprehensive look SSIS and DB2, these are just some of the notes I've come up with since I've started working with DB2 and SSIS.  I'm sure as I continue developing my packages, I'll find more quirks and will post them here.

  Read the article

• What’s New in The Second Edition of Regular Expressions Cookbook

  - by Jan Goyvaerts

  %COOKBOOKFRAME% The second edition of Regular Expressions Cookbook is a completely revised edition, not just a minor update. All of the content from the first edition has been updated for the latest versions of the regular expression flavors and programming languages we discuss. We’ve corrected all errors that we could find and rewritten many sections that were either unclear or lacking in detail. And lack of detail was not something the first edition was accused of. Expect the second edition to really dot all i’s and cross all t’s. A few sections were removed. In particular, we removed much talk about browser inconsistencies as modern browsers are much more compatible with the official JavaScript standard. There is plenty of new content. The second edition has 101 more pages, bringing the total to 612. It’s almost 20% bigger than the first edition. We’ve added XRegExp as an additional regex flavor to all recipes throughout the book where XRegExp provides a better solution than standard JavaScript. We did keep the standard JavaScript solutions, so you can decide which is better for your needs. The new edition adds 21 recipes, bringing the total to 146. 14 of the new recipes are in the new Source Code and Log Files chapter. These recipes demonstrate techniques that are very useful for manipulating source code in a text editor and for dealing with log files using a grep tool. Chapter 3 which has recipes for programming with regular expressions gets only one new recipe, but it’s a doozy. If anyone has ever flamed you for using a regular expression instead of a parser, you’ll now be able to tell them how you can create your own parser by mixing regular expressions with procedural code. Combined with the recipes from the new Source Code and Log Files chapter, you can create parsers for whatever custom language or file format you like. If you have any interest in regular expressions at all, whether you’re a beginner or already consider yourself an expert, you definitely need a copy of the second edition of Regular Expressions Cookbook if you didn’t already buy the first. If you did buy the first edition, and you often find yourself referring back to it, then the second edition is a very worthwhile upgrade. You can buy the second edition of Regular Expressions Cookbook from Amazon or wherever technical books are sold. Ask for ISBN 1449319432.

  Read the article

• The broken Promise of the Mobile Web

  - by Rick Strahl

  High end mobile devices have been with us now for almost 7 years and they have utterly transformed the way we access information. Mobile phones and smartphones that have access to the Internet and host smart applications are in the hands of a large percentage of the population of the world. In many places even very remote, cell phones and even smart phones are a common sight. I’ll never forget when I was in India in 2011 I was up in the Southern Indian mountains riding an elephant out of a tiny local village, with an elephant herder in front riding atop of the elephant in front of us. He was dressed in traditional garb with the loin wrap and head cloth/turban as did quite a few of the locals in this small out of the way and not so touristy village. So we’re slowly trundling along in the forest and he’s lazily using his stick to guide the elephant and… 10 minutes in he pulls out his cell phone from his sash and starts texting. In the middle of texting a huge pig jumps out from the side of the trail and he takes a picture running across our path in the jungle! So yeah, mobile technology is very pervasive and it’s reached into even very buried and unexpected parts of this world. Apps are still King Apps currently rule the roost when it comes to mobile devices and the applications that run on them. If there’s something that you need on your mobile device your first step usually is to look for an app, not use your browser. But native app development remains a pain in the butt, with the requirement to have to support 2 or 3 completely separate platforms. There are solutions that try to bridge that gap. Xamarin is on a tear at the moment, providing their cross-device toolkit to build applications using C#. While Xamarin tools are impressive – and also *very* expensive – they only address part of the development madness that is app development. There are still specific device integration isssues, dealing with the different developer programs, security and certificate setups and all that other noise that surrounds app development. There’s also PhoneGap/Cordova which provides a hybrid solution that involves creating local HTML/CSS/JavaScript based applications, and then packaging them to run in a specialized App container that can run on most mobile device platforms using a WebView interface. This allows for using of HTML technology, but it also still requires all the set up, configuration of APIs, security keys and certification and submission and deployment process just like native applications – you actually lose many of the benefits that  Web based apps bring. The big selling point of Cordova is that you get to use HTML have the ability to build your UI once for all platforms and run across all of them – but the rest of the app process remains in place. Apps can be a big pain to create and manage especially when we are talking about specialized or vertical business applications that aren’t geared at the mainstream market and that don’t fit the ‘store’ model. If you’re building a small intra department application you don’t want to deal with multiple device platforms and certification etc. for various public or corporate app stores. That model is simply not a good fit both from the development and deployment perspective. Even for commercial, big ticket apps, HTML as a UI platform offers many advantages over native, from write-once run-anywhere, to remote maintenance, single point of management and failure to having full control over the application as opposed to have the app store overloads censor you. In a lot of ways Web based HTML/CSS/JavaScript applications have so much potential for building better solutions based on existing Web technologies for the very same reasons a lot of content years ago moved off the desktop to the Web. To me the Web as a mobile platform makes perfect sense, but the reality of today’s Mobile Web unfortunately looks a little different… Where’s the Love for the Mobile Web? Yet here we are in the middle of 2014, nearly 7 years after the first iPhone was released and brought the promise of rich interactive information at your fingertips, and yet we still don’t really have a solid mobile Web platform. I know what you’re thinking: “But we have lots of HTML/JavaScript/CSS features that allows us to build nice mobile interfaces”. I agree to a point – it’s actually quite possible to build nice looking, rich and capable Web UI today. We have media queries to deal with varied display sizes, CSS transforms for smooth animations and transitions, tons of CSS improvements in CSS 3 that facilitate rich layout, a host of APIs geared towards mobile device features and lately even a number of JavaScript framework choices that facilitate development of multi-screen apps in a consistent manner. Personally I’ve been working a lot with AngularJs and heavily modified Bootstrap themes to build mobile first UIs and that’s been working very well to provide highly usable and attractive UI for typical mobile business applications. From the pure UI perspective things actually look very good. Not just about the UI But it’s not just about the UI - it’s also about integration with the mobile device. When it comes to putting all those pieces together into what amounts to a consolidated platform to build mobile Web applications, I think we still have a ways to go… there are a lot of missing pieces to make it all work together and integrate with the device more smoothly, and more importantly to make it work uniformly across the majority of devices. I think there are a number of reasons for this. Slow Standards Adoption HTML standards implementations and ratification has been dreadfully slow, and browser vendors all seem to pick and choose different pieces of the technology they implement. The end result is that we have a capable UI platform that’s missing some of the infrastructure pieces to make it whole on mobile devices. There’s lots of potential but what is lacking that final 10% to build truly compelling mobile applications that can compete favorably with native applications. Some of it is the fragmentation of browsers and the slow evolution of the mobile specific HTML APIs. A host of mobile standards exist but many of the standards are in the early review stage and they have been there stuck for long periods of time and seem to move at a glacial pace. Browser vendors seem even slower to implement them, and for good reason – non-ratified standards mean that implementations may change and vendor implementations tend to be experimental and  likely have to be changed later. Neither Vendors or developers are not keen on changing standards. This is the typical chicken and egg scenario, but without some forward momentum from some party we end up stuck in the mud. It seems that either the standards bodies or the vendors need to carry the torch forward and that doesn’t seem to be happening quickly enough. Mobile Device Integration just isn’t good enough Current standards are not far reaching enough to address a number of the use case scenarios necessary for many mobile applications. While not every application needs to have access to all mobile device features, almost every mobile application could benefit from some integration with other parts of the mobile device platform. Integration with GPS, phone, media, messaging, notifications, linking and contacts system are benefits that are unique to mobile applications and could be widely used, but are mostly (with the exception of GPS) inaccessible for Web based applications today. Unfortunately trying to do most of this today only with a mobile Web browser is a losing battle. Aside from PhoneGap/Cordova’s app centric model with its own custom API accessing mobile device features and the token exception of the GeoLocation API, most device integration features are not widely supported by the current crop of mobile browsers. For example there’s no usable messaging API that allows access to SMS or contacts from HTML. Even obvious components like the Media Capture API are only implemented partially by mobile devices. There are alternatives and workarounds for some of these interfaces by using browser specific code, but that’s might ugly and something that I thought we were trying to leave behind with newer browser standards. But it’s not quite working out that way. It’s utterly perplexing to me that mobile standards like Media Capture and Streams, Media Gallery Access, Responsive Images, Messaging API, Contacts Manager API have only minimal or no traction at all today. Keep in mind we’ve had mobile browsers for nearly 7 years now, and yet we still have to think about how to get access to an image from the image gallery or the camera on some devices? Heck Windows Phone IE Mobile just gained the ability to upload images recently in the Windows 8.1 Update – that’s feature that HTML has had for 20 years! These are simple concepts and common problems that should have been solved a long time ago. It’s extremely frustrating to see build 90% of a mobile Web app with relative ease and then hit a brick wall for the remaining 10%, which often can be show stoppers. The remaining 10% have to do with platform integration, browser differences and working around the limitations that browsers and ‘pinned’ applications impose on HTML applications. The maddening part is that these limitations seem arbitrary as they could easily work on all mobile platforms. For example, SMS has a URL Moniker interface that sort of works on Android, works badly with iOS (only works if the address is already in the contact list) and not at all on Windows Phone. There’s no reason this shouldn’t work universally using the same interface – after all all phones have supported SMS since before the year 2000! But, it doesn’t have to be this way Change can happen very quickly. Take the GeoLocation API for example. Geolocation has taken off at the very beginning of the mobile device era and today it works well, provides the necessary security (a big concern for many mobile APIs), and is supported by just about all major mobile and even desktop browsers today. It handles security concerns via prompts to avoid unwanted access which is a model that would work for most other device APIs in a similar fashion. One time approval and occasional re-approval if code changes or caches expire. Simple and only slightly intrusive. It all works well, even though GeoLocation actually has some physical limitations, such as representing the current location when no GPS device is present. Yet this is a solved problem, where other APIs that are conceptually much simpler to implement have failed to gain any traction at all. Technically none of these APIs should be a problem to implement, but it appears that the momentum is just not there. Inadequate Web Application Linking and Activation Another important piece of the puzzle missing is the integration of HTML based Web applications. Today HTML based applications are not first class citizens on mobile operating systems. When talking about HTML based content there’s a big difference between content and applications. Content is great for search engine discovery and plain browser usage. Content is usually accessed intermittently and permanent linking is not so critical for this type of content.  But applications have different needs. Applications need to be started up quickly and must be easily switchable to support a multi-tasking user workflow. Therefore, it’s pretty crucial that mobile Web apps are integrated into the underlying mobile OS and work with the standard task management features. Unfortunately this integration is not as smooth as it should be. It starts with actually trying to find mobile Web applications, to ‘installing’ them onto a phone in an easily accessible manner in a prominent position. The experience of discovering a Mobile Web ‘App’ and making it sticky is by no means as easy or satisfying. Today the way you’d go about this is: Open the browser Search for a Web Site in the browser with your search engine of choice Hope that you find the right site Hope that you actually find a site that works for your mobile device Click on the link and run the app in a fully chrome’d browser instance (read tiny surface area) Pin the app to the home screen (with all the limitations outline above) Hope you pointed at the right URL when you pinned Even for you and me as developers, there are a few steps in there that are painful and annoying, but think about the average user. First figuring out how to search for a specific site or URL? And then pinning the app and hopefully from the right location? You’ve probably lost more than half of your audience at that point. This experience sucks. For developers too this process is painful since app developers can’t control the shortcut creation directly. This problem often gets solved by crazy coding schemes, with annoying pop-ups that try to get people to create shortcuts via fancy animations that are both annoying and add overhead to each and every application that implements this sort of thing differently. And that’s not the end of it - getting the link onto the home screen with an application icon varies quite a bit between browsers. Apple’s non-standard meta tags are prominent and they work with iOS and Android (only more recent versions), but not on Windows Phone. Windows Phone instead requires you to create an actual screen or rather a partial screen be captured for a shortcut in the tile manager. Who had that brilliant idea I wonder? Surprisingly Chrome on recent Android versions seems to actually get it right – icons use pngs, pinning is easy and pinned applications properly behave like standalone apps and retain the browser’s active page state and content. Each of the platforms has a different way to specify icons (WP doesn’t allow you to use an icon image at all), and the most widely used interface in use today is a bunch of Apple specific meta tags that other browsers choose to support. The question is: Why is there no standard implementation for installing shortcuts across mobile platforms using an official format rather than a proprietary one? Then there’s iOS and the crazy way it treats home screen linked URLs using a crazy hybrid format that is neither as capable as a Web app running in Safari nor a WebView hosted application. Moving off the Web ‘app’ link when switching to another app actually causes the browser and preview it to ‘blank out’ the Web application in the Task View (see screenshot on the right). Then, when the ‘app’ is reactivated it ends up completely restarting the browser with the original link. This is crazy behavior that you can’t easily work around. In some situations you might be able to store the application state and restore it using LocalStorage, but for many scenarios that involve complex data sources (like say Google Maps) that’s not a possibility. The only reason for this screwed up behavior I can think of is that it is deliberate to make Web apps a pain in the butt to use and forcing users trough the App Store/PhoneGap/Cordova route. App linking and management is a very basic problem – something that we essentially have solved in every desktop browser – yet on mobile devices where it arguably matters a lot more to have easy access to web content we have to jump through hoops to have even a remotely decent linking/activation experience across browsers. Where’s the Money? It’s not surprising that device home screen integration and Mobile Web support in general is in such dismal shape – the mobile OS vendors benefit financially from App store sales and have little to gain from Web based applications that bypass the App store and the cash cow that it presents. On top of that, platform specific vendor lock-in of both end users and developers who have invested in hardware, apps and consumables is something that mobile platform vendors actually aspire to. Web based interfaces that are cross-platform are the anti-thesis of that and so again it’s no surprise that the mobile Web is on a struggling path. But – that may be changing. More and more we’re seeing operations shifting to services that are subscription based or otherwise collect money for usage, and that may drive more progress into the Web direction in the end . Nothing like the almighty dollar to drive innovation forward. Do we need a Mobile Web App Store? As much as I dislike moderated experiences in today’s massive App Stores, they do at least provide one single place to look for apps for your device. I think we could really use some sort of registry, that could provide something akin to an app store for mobile Web apps, to make it easier to actually find mobile applications. This could take the form of a specialized search engine, or maybe a more formal store/registry like structure. Something like apt-get/chocolatey for Web apps. It could be curated and provide at least some feedback and reviews that might help with the integrity of applications. Coupled to that could be a native application on each platform that would allow searching and browsing of the registry and then also handle installation in the form of providing the home screen linking, plus maybe an initial security configuration that determines what features are allowed access to for the app. I’m not holding my breath. In order for this sort of thing to take off and gain widespread appeal, a lot of coordination would be required. And in order to get enough traction it would have to come from a well known entity – a mobile Web app store from a no name source is unlikely to gain high enough usage numbers to make a difference. In a way this would eliminate some of the freedom of the Web, but of course this would also be an optional search path in addition to the standard open Web search mechanisms to find and access content today. Security Security is a big deal, and one of the perceived reasons why so many IT professionals appear to be willing to go back to the walled garden of deployed apps is that Apps are perceived as safe due to the official review and curation of the App stores. Curated stores are supposed to protect you from malware, illegal and misleading content. It doesn’t always work out that way and all the major vendors have had issues with security and the review process at some time or another. Security is critical, but I also think that Web applications in general pose less of a security threat than native applications, by nature of the sandboxed browser and JavaScript environments. Web applications run externally completely and in the HTML and JavaScript sandboxes, with only a very few controlled APIs allowing access to device specific features. And as discussed earlier – security for any device interaction can be granted the same for mobile applications through a Web browser, as they can for native applications either via explicit policies loaded from the Web, or via prompting as GeoLocation does today. Security is important, but it’s certainly solvable problem for Web applications even those that need to access device hardware. Security shouldn’t be a reason for Web apps to be an equal player in mobile applications. Apps are winning, but haven’t we been here before? So now we’re finding ourselves back in an era of installed app, rather than Web based and managed apps. Only it’s even worse today than with Desktop applications, in that the apps are going through a gatekeeper that charges a toll and censors what you can and can’t do in your apps. Frankly it’s a mystery to me why anybody would buy into this model and why it’s lasted this long when we’ve already been through this process. It’s crazy… It’s really a shame that this regression is happening. We have the technology to make mobile Web apps much more prominent, but yet we’re basically held back by what seems little more than bureaucracy, partisan bickering and self interest of the major parties involved. Back in the day of the desktop it was Internet Explorer’s 98+%  market shareholding back the Web from improvements for many years – now it’s the combined mobile OS market in control of the mobile browsers. If mobile Web apps were allowed to be treated the same as native apps with simple ways to install and run them consistently and persistently, that would go a long way to making mobile applications much more usable and seriously viable alternatives to native apps. But as it is mobile apps have a severe disadvantage in placement and operation. There are a few bright spots in all of this. Mozilla’s FireFoxOs is embracing the Web for it’s mobile OS by essentially building every app out of HTML and JavaScript based content. It supports both packaged and certified package modes (that can be put into the app store), and Open Web apps that are loaded and run completely off the Web and can also cache locally for offline operation using a manifest. Open Web apps are treated as full class citizens in FireFoxOS and run using the same mechanism as installed apps. Unfortunately FireFoxOs is getting a slow start with minimal device support and specifically targeting the low end market. We can hope that this approach will change and catch on with other vendors, but that’s also an uphill battle given the conflict of interest with platform lock in that it represents. Recent versions of Android also seem to be working reasonably well with mobile application integration onto the desktop and activation out of the box. Although it still uses the Apple meta tags to find icons and behavior settings, everything at least works as you would expect – icons to the desktop on pinning, WebView based full screen activation, and reliable application persistence as the browser/app is treated like a real application. Hopefully iOS will at some point provide this same level of rudimentary Web app support. What’s also interesting to me is that Microsoft hasn’t picked up on the obvious need for a solid Web App platform. Being a distant third in the mobile OS war, Microsoft certainly has nothing to lose and everything to gain by using fresh ideas and expanding into areas that the other major vendors are neglecting. But instead Microsoft is trying to beat the market leaders at their own game, fighting on their adversary’s terms instead of taking a new tack. Providing a kick ass mobile Web platform that takes the lead on some of the proposed mobile APIs would be something positive that Microsoft could do to improve its miserable position in the mobile device market. Where are we at with Mobile Web? It sure sounds like I’m really down on the Mobile Web, right? I’ve built a number of mobile apps in the last year and while overall result and response has been very positive to what we were able to accomplish in terms of UI, getting that final 10% that required device integration dialed was an absolute nightmare on every single one of them. Big compromises had to be made and some features were left out or had to be modified for some devices. In two cases we opted to go the Cordova route in order to get the integration we needed, along with the extra pain involved in that process. Unless you’re not integrating with device features and you don’t care deeply about a smooth integration with the mobile desktop, mobile Web development is fraught with frustration. So, yes I’m frustrated! But it’s not for lack of wanting the mobile Web to succeed. I am still a firm believer that we will eventually arrive a much more functional mobile Web platform that allows access to the most common device features in a sensible way. It wouldn't be difficult for device platform vendors to make Web based applications first class citizens on mobile devices. But unfortunately it looks like it will still be some time before this happens. So, what’s your experience building mobile Web apps? Are you finding similar issues? Just giving up on raw Web applications and building PhoneGap apps instead? Completely skipping the Web and going native? Leave a comment for discussion. Resources Rick Strahl on DotNet Rocks talking about Mobile Web© Rick Strahl, West Wind Technologies, 2005-2014Posted in HTML5  Mobile   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Hyperlinked, externalized source code documentation

  - by Dave Jarvis

  Why do we still embed natural language descriptions of source code (i.e., the reason why a line of code was written) within the source code, rather than as a separate document? Given the expansive real-estate afforded to modern development environments (high-resolution monitors, dual-monitors, etc.), an IDE could provide semi-lock-step panels wherein source code is visually separated from -- but intrinsically linked to -- its corresponding comments. For example, developers could write source code comments in a hyper-linked markup language (linking to additional software requirements), which would simultaneously prevent documentation from cluttering the source code. What shortcomings would inhibit such a software development mechanism? A mock-up to help clarify the question: When the cursor is at a particular line in the source code (shown with a blue background, above), the documentation that corresponds to the line at the cursor is highlighted (i.e., distinguished from the other details). As noted in the question, the documentation would stay in lock-step with the source code as the cursor jumps through the source code. A hot-key could switch between "documentation mode" and "development mode". Potential advantages include: More source code and more documentation on the screen(s) at once Ability to edit documentation independently of source code (regardless of language?) Write documentation and source code in parallel without merge conflicts Real-time hyperlinked documentation with superior text formatting Quasi-real-time machine translation into different natural languages Every line of code can be clearly linked to a task, business requirement, etc. Documentation could automatically timestamp when each line of code was written (metrics) Dynamic inclusion of architecture diagrams, images to explain relations, etc. Single-source documentation (e.g., tag code snippets for user manual inclusion). Note: The documentation window can be collapsed Workflow for viewing or comparing source files would not be affected How the implementation happens is a detail; the documentation could be: kept at the end of the source file; split into two files by convention (filename.c, filename.c.doc); or fully database-driven By hyperlinked documentation, I mean linking to external sources (such as StackOverflow or Wikipedia) and internal documents (i.e., a wiki on a subdomain that could cross-reference business requirements documentation) and other source files (similar to JavaDocs). Related thread: What's with the aversion to documentation in the industry?

  Read the article

• C# 4.0: Named And Optional Arguments

  - by Paulo Morgado

  As part of the co-evolution effort of C# and Visual Basic, C# 4.0 introduces Named and Optional Arguments. First of all, let’s clarify what are arguments and parameters: Method definition parameters are the input variables of the method. Method call arguments are the values provided to the method parameters. In fact, the C# Language Specification states the following on §7.5: The argument list (§7.5.1) of a function member invocation provides actual values or variable references for the parameters of the function member. Given the above definitions, we can state that: Parameters have always been named and still are. Parameters have never been optional and still aren’t. Named Arguments Until now, the way the C# compiler matched method call definition arguments with method parameters was by position. The first argument provides the value for the first parameter, the second argument provides the value for the second parameter, and so on and so on, regardless of the name of the parameters. If a parameter was missing a corresponding argument to provide its value, the compiler would emit a compilation error. For this call: Greeting("Mr.", "Morgado", 42); this method: public void Greeting(string title, string name, int age) will receive as parameters: title: “Mr.” name: “Morgado” age: 42 What this new feature allows is to use the names of the parameters to identify the corresponding arguments in the form: name:value Not all arguments in the argument list must be named. However, all named arguments must be at the end of the argument list. The matching between arguments (and the evaluation of its value) and parameters will be done first by name for the named arguments and than by position for the unnamed arguments. This means that, for this method definition: public static void Method(int first, int second, int third) this call declaration: int i = 0; Method(i, third: i++, second: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = i++; int CS$0$0001 = ++i; Method(i, CS$0$0001, CS$0$0000); which will give the method the following parameter values: first: 2 second: 2 third: 0 Notice the variable names. Although invalid being invalid C# identifiers, they are valid .NET identifiers and thus avoiding collision between user written and compiler generated code. Besides allowing to re-order of the argument list, this feature is very useful for auto-documenting the code, for example, when the argument list is very long or not clear, from the call site, what the arguments are. Optional Arguments Parameters can now have default values: public static void Method(int first, int second = 2, int third = 3) Parameters with default values must be the last in the parameter list and its value is used as the value of the parameter if the corresponding argument is missing from the method call declaration. For this call declaration: int i = 0; Method(i, third: ++i); will have this code generated by the compiler: int i = 0; int CS$0$0000 = ++i; Method(i, 2, CS$0$0000); which will give the method the following parameter values: first: 1 second: 2 third: 1 Because, when method parameters have default values, arguments can be omitted from the call declaration, this might seem like method overloading or a good replacement for it, but it isn’t. Although methods like this: public static StreamReader OpenTextFile( string path, Encoding encoding = null, bool detectEncoding = true, int bufferSize = 1024) allow to have its calls written like this: OpenTextFile("foo.txt", Encoding.UTF8); OpenTextFile("foo.txt", Encoding.UTF8, bufferSize: 4096); OpenTextFile( bufferSize: 4096, path: "foo.txt", detectEncoding: false); The complier handles default values like constant fields taking the value and useing it instead of a reference to the value. So, like with constant fields, methods with parameters with default values are exposed publicly (and remember that internal members might be publicly accessible – InternalsVisibleToAttribute). If such methods are publicly accessible and used by another assembly, those values will be hard coded in the calling code and, if the called assembly has its default values changed, they won’t be assumed by already compiled code. At the first glance, I though that using optional arguments for “bad” written code was great, but the ability to write code like that was just pure evil. But than I realized that, since I use private constant fields, it’s OK to use default parameter values on privately accessed methods.

  Read the article

• SQL SERVER – Index Created on View not Used Often – Observation of the View – Part 2

  - by pinaldave

  Earlier, I have written an article about SQL SERVER – Index Created on View not Used Often – Observation of the View. I received an email from one of the readers, asking if there would no problems when we create the Index on the base table. Well, we need to discuss this situation in two different cases. Before proceeding to the discussion, I strongly suggest you read my earlier articles. To avoid the duplication, I am not going to repeat the code and explanation over here. In all the earlier cases, I have explained in detail how Index created on the View is not utilized. SQL SERVER – Index Created on View not Used Often – Limitation of the View 12 SQL SERVER – Index Created on View not Used Often – Observation of the View SQL SERVER – Indexed View always Use Index on Table As per earlier blog posts, so far we have done the following: Create a Table Create a View Create Index On View Write SELECT with ORDER BY on View However, the blog reader who emailed me suggests the extension of the said logic, which is as follows: Create a Table Create a View Create Index On View Write SELECT with ORDER BY on View Create Index on the Base Table Write SELECT with ORDER BY on View After doing the last two steps, the question is “Will the query on the View utilize the Index on the View, or will it still use the Index of the base table?“ Let us first run the Create example. USE tempdb GO IF EXISTS (SELECT * FROM sys.views WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[SampleView]')) DROP VIEW [dbo].[SampleView] GO IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[mySampleTable]') AND TYPE IN (N'U')) DROP TABLE [dbo].[mySampleTable] GO -- Create SampleTable CREATE TABLE mySampleTable (ID1 INT, ID2 INT, SomeData VARCHAR(100)) INSERT INTO mySampleTable (ID1,ID2,SomeData) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY o1.name), ROW_NUMBER() OVER (ORDER BY o2.name), o2.name FROM sys.all_objects o1 CROSS JOIN sys.all_objects o2 GO -- Create View CREATE VIEW SampleView WITH SCHEMABINDING AS SELECT ID1,ID2,SomeData FROM dbo.mySampleTable GO -- Create Index on View CREATE UNIQUE CLUSTERED INDEX [IX_ViewSample] ON [dbo].[SampleView] ( ID2 ASC ) GO -- Select from view SELECT ID1,ID2,SomeData FROM SampleView ORDER BY ID2 GO -- Create Index on Original Table -- On Column ID1 CREATE UNIQUE CLUSTERED INDEX [IX_OriginalTable] ON mySampleTable ( ID1 ASC ) GO -- On Column ID2 CREATE UNIQUE NONCLUSTERED INDEX [IX_OriginalTable_ID2] ON mySampleTable ( ID2 ) GO -- Select from view SELECT ID1,ID2,SomeData FROM SampleView ORDER BY ID2 GO Now let us see the execution plans for both of the SELECT statement. Before Index on Base Table (with Index on View): After Index on Base Table (with Index on View): Looking at both executions, it is very clear that with or without, the View is using Indexes. Alright, I have written 11 disadvantages of the Views. Now I have written one case where the View is using Indexes. Anybody who says that I am being harsh on Views can say now that I found one place where Index on View can be helpful. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL View, SQLServer, T SQL, Technology

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• Software Architecture and Software Architecture Evaluation

  How many of us have worked at places where the concept of software architecture was ridiculed for wasting time and money? Even more ridiculous to them was the concept of evaluating software architecture. I think the next time that I am in this situation again, and I hope that I never am I will have to push for this methodology in the software development life cycle. I have spent way too many hours/days/months/years working poorly architected systems or systems that were just built ADHOC. This in software development must stop. I can understand why systems get like this due to overzealous sales staff, demanding management that wants everything yesterday, and project managers asking if things are done yet before the project has even started. But seriously, some time must be spent designing the applications that we write along with evaluating the architecture so that it will integrate will within the existing systems of an origination. If placed in this situation again, I will strive to gain buying from key players within the business, for example: Senior Software Engineers\Developers, Software Architects, Project Managers, Software Quality Assurance, Technical Services, Operations, and Finance in order for this idea to succeed with upper management. In order to convince these key players I will have to show them the benefits of architecture and even more benefits of evaluating software architecture on a system wide level. Benefits of Software Architecture Evaluation Places Stakeholders in the Same Room to Communicate Ensures Delivery of Detailed Quality Goals Prioritizes Conflicting Goals Requires Clear Explication Improves the Quality of Documentation Discovers Opportunities for Cross-Project Reuse Improves Architecture Practices Once I had key player buy in then and only then would I approach upper management about my plan regarding implementing the concept of software architecture and using evaluation to ensure that the software being designed is the proper architecture for the project. In addition to the benefits listed above I would also show upper management how much time is being wasted by not doing these evaluations. For example, if project X cost us Y amount, then why do we have several implementations in various forms of X and how much money and time could we have saved if we just reused the existing code base to give each system the same functionality that was already created? After this, I would mention what would happen if we had 50 instances of this situation? Then I would show them how the software architecture evaluation process would have prevented this and that the optimization could have leveraged its existing code base to increase the speed and quality of its development. References:Carnegie Mellon Software Engineering Institute (2011). Architecture Tradeoff Analysis Method from http://www.sei.cmu.edu/architecture/tools/evaluate/atam.cfm

  Read the article

• SQL SERVER – Index Created on View not Used Often – Observation of the View

  - by pinaldave

  I always enjoy writing about concepts on Views. Views are frequently used concepts, and so it’s not surprising that I have seen so many misconceptions about this subject. To clear such misconceptions, I have previously written the article SQL SERVER – The Limitations of the Views – Eleven and more…. I also wrote a follow up article wherein I demonstrated that without even creating index on the basic table, the query on the View will not use the View. You can read about this demonstration over here: SQL SERVER – Index Created on View not Used Often – Limitation of the View 12. I promised in that post that I would also write an article where I would demonstrate the condition where the Index will be used. I got many responses suggesting that I can do that with using NOEXPAND; I agree. I have already written about this in my original summary article. Here is a way for you to see how Index created on View can be utilized. We will do the following steps on this exercise: Create a Table Create a View Create Index On View Write SELECT with ORDER BY on View USE tempdb GO IF EXISTS (SELECT * FROM sys.views WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[SampleView]')) DROP VIEW [dbo].[SampleView] GO IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[mySampleTable]') AND TYPE IN (N'U')) DROP TABLE [dbo].[mySampleTable] GO -- Create SampleTable CREATE TABLE mySampleTable (ID1 INT, ID2 INT, SomeData VARCHAR(100)) INSERT INTO mySampleTable (ID1,ID2,SomeData) SELECT TOP 100000 ROW_NUMBER() OVER (ORDER BY o1.name), ROW_NUMBER() OVER (ORDER BY o2.name), o2.name FROM sys.all_objects o1 CROSS JOIN sys.all_objects o2 GO -- Create View CREATE VIEW SampleView WITH SCHEMABINDING AS SELECT ID1,ID2,SomeData FROM dbo.mySampleTable GO -- Create Index on View CREATE UNIQUE CLUSTERED INDEX [IX_ViewSample] ON [dbo].[SampleView] ( ID2 ASC ) GO -- Select from view SELECT ID1,ID2,SomeData FROM SampleView ORDER BY ID2 GO When we check the execution plan for this , we find it clearly that the Index created on the View is utilized. ORDER BY clause uses the Index created on the View. I hope this makes the puzzle simpler on how the Index is used on the View. Again, I strongly recommend reading my earlier series about the limitations of the Views found here: SQL SERVER – The Limitations of the Views – Eleven and more…. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL View, T SQL, Technology

  Read the article

• Silverlight Cream for January 03, 2011 -- #1021

  - by Dave Campbell

  In this all-Submittal Issue: Gill Cleeren(-2-), Brian Noyes, Brian Genisio, René Schulte, and Andy Schwam(-2-). Above the Fold: Silverlight: "The INavigationContentLoader interface in Silverlight 4" Gill Cleeren WP7: "Sending Windows Phone Screenshots in an Email" René Schulte WCF RIA Services: "WCF RIA Services Part 10 - Exposing Domain Services To Other Clients" Brian Noyes Shoutouts: Want to know what it takes to be an MVP? Check out René Schulte's recap of 2010: Goodbye 2010 - Hello 2011 ... awesome, René! Rui Marinho sent me this post... it's WPF, but wow... WPF and Kinect! Kinect & WPF From SilverlightCream.com: The INavigationContentLoader interface in Silverlight 4 Gill Cleeren has a couple posts up... this first is a break-out of the INavigationContentLoader... what all can be done with it, in addition to the flow of the page load process broken out. Working with the RaiseCanExecuteChanged in MVVM Light (Silverlight) Gill Cleeren' latest post is a discussion of the Silverlight ICommand interface and Laurent Bugnion's RaiseCanExecuteChanged in MVVM Light, with example code. WCF RIA Services Part 10 - Exposing Domain Services To Other Clients Brian Noyes has Part 10 in his WCF RIA Services Tutorial series up at SilverlightShow ... with info on, for example, exposint an OData, SOAP, or REST/JSON endpoint, or how to consume them. Cross-Training in Silverlight & Flex–MVVM vs Presentation Model Brian Genisio finished the year off with this post in his on-going Silverlight/Flex seris comparing MVVM vs Presentation Model .. lots of good MVVM/ViewModel tips and code in this post. Sending Windows Phone Screenshots in an Email René Schulte is the perfect guy to be doing this... how about emailing a screenshot directly from inside an app, for instance Laurent's taking a screenshot from inside an app... too cool, Rene! Windows Phone 7 Application Development Tips Andy Schwam has a post up with tips he learned while creating his first WP7 app... lots of good tips, Gestures, Camera, ISO... check it out, could save you some time and tears :) WP7 Tip: Using the CameraCaptureTask for Windows Phone 7 Andy Schwam's most recent post is WP7 dev as well, and has a bunch of tips and code for using the camera, such as capturing an image, resizing, saving... good stuff. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Nginx and PHP Fundamentals

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/08/01/nginx-and-php-fundamentals.aspxHot on the heels of my .NET caching course, I’ve had my first “fundamentals” course released on Pluralsight: Nginx and PHP Fundamentals. It’s a practical look at two of the biggest technologies on the web – Nginx, which is the fastest growing HTTP server around (currently hosting 100+ million sites), and PHP, which powers more websites than any other server-side framework (currently 240+ million sites). The two technologies work well together, both are open-source and cross-platform and both are lightweight and easy to get started with - you just need to download and unzip the runtimes, and with a text editor you can create and host dynamic websites. I’ve used PHP as a second (sometimes third) language since 2005 when I was brought cold into an established codebase to help improve performance, and Nginx to host tier 2 apps for the last couple of years. As with any training course, you learn new things as you produce it, and it was good to focus on a different stack from my commercial .NET world. In the course I start with a website in two parts – one which is just static content, and one which processes a user registration form using ASP.NET MVC, both running in IIS. Over four modules I migrate the app to Nginx and PHP: Hosting Static Content in Nginx – how to deploy and configure Nginx for a basic website; PHP Part 1: Basic Web Forms – installing PHP and an IDE, and building a simple form with server-side validation; PHP Part 2: Packages and Integration – using PECL and Composer for packages to connect to Azure, AWS, Mongo and reCAPTCHA; Hosting PHP in Nginx – configuring Nginx to host our PHP site. Along the way I run some performance stats with JMeter, and the headlines are that Nginx running on Linux outperforms IIS on Windows for static content,by 800 requests per second over 1000 concurrent requests; and Linux+Ngnix+PHP outperforms Windows+IIS+ASP.NET MVC by 700 request per second with the same load. Of course, the headline stats don’t tell the whole story, and when you add OpCode caching for PHP and the ASP.NET Output Cache, the results are very different. As Web architecture moves away from heavy server-side processing, to Single Page Apps with client-side frameworks like AngularJS and Knockout, I think there’s an increasing need for high-performance, low-cost server technologies, and the combination of Nginx and PHP makes a compelling case.

  Read the article

• Java Spotlight Episode 139: Mark Heckler and José Pereda on JES based Energy Monitoring @MkHeck @JPeredaDnr

  - by Roger Brinkley

  Interview with Mark Heckler and José Pereda on using JavaSE Embedded with the Java Embedded Suite on a RaspberryPI along with a JavaFX client to monitor an energy production system and their JavaOne Tutorial- Java Embedded EXTREME MASHUPS: Building self-powering sensor nets for the IoT Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Java Virtual Developer Day Session Videos Available JavaFX Maven Plugin 2.0 Released JavaFX Scene Builder 1.1 build b28 FXForm 2 release 0.2.2 OpenJDK8/Zero cross compile build for Foundation model HSAIL-based GPU offload: the Quest for Java Performance Begins Progress on Moving to Gradle Java EE 7 Launch Keynote Replay Java EE 7 Technical Breakouts Replay Java EE 7 support in NetBeans 7.3.1 Java EE 7 support in Eclipse 4.3 Java Magazine - May/June Events Jul 16-19, Uberconf, Denver, USA Jul 22-24, JavaOne Shanghai, China Jul 29-31, JVM Language Summit, Santa Clara Sep 11-12, JavaZone, Oslo, Norway Sep 19-20, Strange Loop, St. Louis Sep 22-26 JavaOne San Francisco 2013, USA Feature Interview Mark Heckler is an Oracle Corporation Java/Middleware/Core Tech Engineer with development experience in numerous environments. He has worked for and with key players in the manufacturing, emerging markets, retail, medical, telecom, and financial industries to develop and deliver critical capabilities on time and on budget. Currently, he works primarily with large government customers using Java throughout the stack and across the enterprise. He also participates in open-source development at every opportunity, being a JFXtras project committer and developer of DialogFX, MonologFX, and various other projects. When Mark isn't working with Java, he enjoys writing about his experiences at the Java Jungle website (https://blogs.oracle.com/javajungle/) and on Twitter (@MkHeck). José Pereda is a Structural Engineer working in the School of Engineers in the University of Valladolid in Spain for more than 15 years, and his passion is related to applying programming to solve real problems. Being involved with Java since 1999, José shares his time between JavaFX and the Embedded world, developing commercial applications and open source projects (https://github.com/jperedadnr), and blogging (http://jperedadnr.blogspot.com.es/) or tweeting (@JPeredaDnr) of both. What’s Cool AquaFX 0.1 - Mac OS X skin for JavaFX by Claudine Zillmann DromblerFX adds a docking framework Part 2 of Gerrit’s taming the Nashorn for writing JavaFX apps in Javascript Tool from mihosoft called JSelect for quickly switching JDKs Apache Maven Javadoc Plugin 2.9.1 Released Proposal: Java Concurrency Stress tests (jcstress) Slide-free Code-driven session at SV JUG JavaOne approvals/rejects gone out

  Read the article

• Asp.net session on browser close

  - by budugu

  Note: Cross posted from Vijay Kodali's Blog. Permalink How to capture logoff time when user closes browser? Or How to end user session when browser closed? These are some of the frequently asked questions in asp.net forums. In this post I'll show you how to do this when you're building an ASP.NET web application. Before we start, one fact: There is no full-proof technique to catch the browser close event for 100% of time. The trouble lies in the stateless nature of HTTP. The Web server is out of the picture as soon as it finishes sending the page content to the client. After that, all you can rely on is a client side script. Unfortunately, there is no reliable client side event for browser close. Solution: The first thing you need to do is create the web service. I've added web service and named it AsynchronousSave.asmx.    Make this web service accessible from Script, by setting class qualified with the ScriptServiceAttribute attribute...  Add a method (SaveLogOffTime) marked with [WebMethod] attribute. This method simply accepts UserId as a string variable and writes that value and logoff time to text file. But you can pass as many variables as required. You can then use this information for many purposes. To end user session, you can just call Session.Abandon() in the above web method. To enable web service to be called from page’s client side code, add script manager to page. Here i am adding to SessionTest.aspx page When the user closes the browser, onbeforeunload event fires on the client side. Our final step is adding a java script function to that event, which makes web service calls. The code is simple but effective My Code HTML:( SessionTest.aspx ) C#:( SessionTest.aspx.cs ) That’s’ it. Run the application and after browser close, open the text file to see the log off time. The above code works well in IE 7/8. If you have any questions, leave a comment.

  Read the article

• Asp.net session on browser close

  - by budugu

  Note: Cross posted from Vijay Kodali's Blog. Permalink How to capture logoff time when user closes browser? Or How to end user session when browser closed? These are some of the frequently asked questions in asp.net forums. In this post I'll show you how to do this when you're building an ASP.NET web application. Before we start, one fact: There is no full-proof technique to catch the browser close event for 100% of time. The trouble lies in the stateless nature of HTTP. The Web server is out of the picture as soon as it finishes sending the page content to the client. After that, all you can rely on is a client side script. Unfortunately, there is no reliable client side event for browser close. Solution: The first thing you need to do is create the web service. I've added web service and named it AsynchronousSave.asmx.    Make this web service accessible from Script, by setting class qualified with the ScriptServiceAttribute attribute...  Add a method (SaveLogOffTime) marked with [WebMethod] attribute. This method simply accepts UserId as a string variable and writes that value and logoff time to text file. But you can pass as many variables as required. You can then use this information for many purposes. To end user session, you can just call Session.Abandon() in the above web method. To enable web service to be called from page’s client side code, add script manager to page. Here i am adding to SessionTest.aspx page When the user closes the browser, onbeforeunload event fires on the client side. Our final step is adding a java script function to that event, which makes web service calls. The code is simple but effective My Code HTML:( SessionTest.aspx ) C#:( SessionTest.aspx.cs ) That’s’ it. Run the application and after browser close, open the text file to see the log off time. The above code works well in IE 7/8. If you have any questions, leave a comment.

  Read the article

• SQL SERVER – Solution – Puzzle – SELECT * vs SELECT COUNT(*)

  - by pinaldave

  Earlier I have published Puzzle Why SELECT * throws an error but SELECT COUNT(*) does not. This question have received many interesting comments. Let us go over few of the answers, which are valid. Before I start the same, let me acknowledge Rob Farley who has not only answered correctly very first but also started interesting conversation in the same thread. The usual question will be what is the right answer. I would like to point to official Microsoft Connect Items which discusses the same. RGarvao https://connect.microsoft.com/SQLServer/feedback/details/671475/select-test-where-exists-select tiberiu utan http://connect.microsoft.com/SQLServer/feedback/details/338532/count-returns-a-value-1 Rob Farley count(*) is about counting rows, not a particular column. It doesn’t even look to see what columns are available, it’ll just count the rows, which in the case of a missing FROM clause, is 1. “select *” is designed to return columns, and therefore barfs if there are none available. Even more odd is this one: select ‘blah’ where exists (select *) You might be surprised at the results… Koushik The engine performs a “Constant scan” for Count(*) where as in the case of “SELECT *” the engine is trying to perform either Index/Cluster/Table scans. amikolaj When you query ‘select * from sometable’, SQL replaces * with the current schema of that table. With out a source for the schema, SQL throws an error. so when you query ‘select count(*)’, you are counting the one row. * is just a constant to SQL here. Check out the execution plan. Like the description states – ‘Scan an internal table of constants.’ You could do ‘select COUNT(‘my name is adam and this is my answer’)’ and get the same answer. Netra Acharya SELECT * Here, * represents all columns from a table. So it always looks for a table (As we know, there should be FROM clause before specifying table name). So, it throws an error whenever this condition is not satisfied. SELECT COUNT(*) Here, COUNT is a Function. So it is not mandetory to provide a table. Check it out this: DECLARE @cnt INT SET @cnt = COUNT(*) SELECT @cnt SET @cnt = COUNT(‘x’) SELECT @cnt Naveen Select 1 / Select ‘*’ will return 1/* as expected. Select Count(1)/Count(*) will return the count of result set of select statement. Count(1)/Count(*) will have one 1/* for each row in the result set of select statement. Select 1 or Select ‘*’ result set will contain only 1 result. so count is 1. Where as “Select *” is a sysntax which expects the table or equauivalent to table (table functions, etc..). It is like compilation error for that query. Ramesh Hi Friends, Count is an aggregate function and it expects the rows (list of records) for a specified single column or whole rows for *. So, when we use ‘select *’ it definitely give and error because ‘*’ is meant to have all the fields but there is not any table and without table it can only raise an error. So, in the case of ‘Select Count(*)’, there will be an error as a record in the count function so you will get the result as ’1'. Try using : Select COUNT(‘RAMESH’) and think there is an error ‘Must specify table to select from.’ in place of ‘RAMESH’ Pinal : If i am wrong then please clarify this. Sachin Nandanwar Any aggregate function expects a constant or a column name as an expression. DO NOT be confused with * in an aggregate function.The aggregate function does not treat it as a column name or a set of column names but a constant value, as * is a key word in SQL. You can replace any value instead of * for the COUNT function.Ex Select COUNT(5) will result as 1. The error resulting from select * is obvious it expects an object where it can extract the result set. I sincerely thank you all for wonderful conversation, I personally enjoyed it and I am sure all of you have the same feeling. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >