Search Results

Search found 4534 results on 182 pages for 'dns q'.

Page 165/182 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• One Windows Domain workstation can ping gateway but gets no internet access

  - by dindeman

  One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

  Read the article

• TCP dies on a Linux laptop

  - by Roman Cheplyaka

  Once in several days I have the following problem. My laptop (Debian GNU/Linux testing) suddenly becomes unable to work with TCP connections to the internet. The following things continue to work fine: UDP (DNS), ICMP (ping) — I get instant response TCP connections to other machines in the local network (e.g. I can ssh to a neighbour laptop) everything is ok for other machines in my LAN But when I try TCP connections from my laptop, they time out (no response to SYN packets). Here's a typical curl output: % curl -v google.com * About to connect() to google.com port 80 (#0) * Trying 173.194.39.105... * Connection timed out * Trying 173.194.39.110... * Connection timed out * Trying 173.194.39.97... * Connection timed out * Trying 173.194.39.102... * Timeout * Trying 173.194.39.98... * Timeout * Trying 173.194.39.96... * Timeout * Trying 173.194.39.103... * Timeout * Trying 173.194.39.99... * Timeout * Trying 173.194.39.101... * Timeout * Trying 173.194.39.104... * Timeout * Trying 173.194.39.100... * Timeout * Trying 2a00:1450:400d:803::1009... * Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable * Success * couldn't connect to host * Closing connection #0 curl: (7) Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable Restarting the connection and/or reloading the network card kernel module doesn't help. The only thing that helps is reboot. Clearly something is wrong with my system (everything else works fine), but I have no idea what exactly. I don't know how to reproduce this, but as I said, it happens every several days. My setup is a wireless router that is connected to the ISP via PPPoE. Any advice?

  Read the article

• Javascript loading never completes on many sites

  - by Joe

  I recently moved country and have found that on many websites the page never finishes loading. In some cases, no content is ever displayed, but the loading will never time out. Loading Developer Tools in Chrome shows me that it is the Javascript files which never load. For example, this BBC article will never load compatability.js, though will load all the other JS files perfectly. Google Maps often fails to finish loading, meaning it's impossible to make searches. There seems to be no pattern to which files will fail to load (i.e. they don't come from the same CDN). I have tried Chrome, Safari and Firefox on OSX 10.8, and Chrome on my girlfriend's OSX 10.7. I have similar issues on the iPad. In many cases, if I can go to the mobile version of the page that seems to load fine. I have run the browsers in private mode, disabled plugins, updated flash, cleared the cache, flushed the DNS cache - though it would seem that if this is happening on other devices, none of this would work anyway. Is this an ISP issue? And if so, why would it be limited to certain JS files and not all? JS files from the same domain work fine, so I'm not really sure what I should be looking for.

  Read the article

• Troubleshooting my internet connection

  - by Simon Verbeke

  While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

  Read the article

• .php file blank - .php5 files works

  - by Kleidi

  I have a problem with a server of mine. I've installed virtualmin/webin on it for administration and I have 1 domain on it. DNS management is external. On this domain I only have an html "Under Construction" index and 5 subdomains. In all those subdomains I have PHP systems running perfectly. I've tried to install Wordpress on the main domain and I'm having some issues: None .php files loads. I have made a phpinfo file on it to check it and it won't work either; only a blank page appears. When I check the source code of it in browser, appears the code. I have changed the extensions to .php5 and it worked perfectly. Something is going wrong with it but I can't figure out what. I have checked the apache error and nothing appears. 3 Days ago I upgraded from php 5.2.* to 5.4.21. Server is running CentOS 5.10.

  Read the article

• Unable to remove invalid(orphaned?) SPNs

  - by Brent

  tldr version: Renamed domain from internal.domain.com to domain.com, have 4 SPNs that am unable to remove from DC. So my domain was internal.domain-name.com and I renamed it to domain-name.com and I thought everything was good. Several days later, I start setting up my RD Gateway and am noticing issues surrounding group policy. I run dcdiag and the SystemLog part fails. Starting test: SystemLog A warning event occurred. EventID: 0x00001796 Time Generated: 08/25/2014 02:48:30 Event String: Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and this server. This event occurs once per boot of the server on the first time a client uses NTLM with this server. An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:49:18 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:49:48 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: An error event occurred. EventID: 0xC0001B70 Time Generated: 08/25/2014 02:52:47 Event String: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: This made me check my AD for possible connections to the .internal domain. I found four which I remove by: setspn -D E3514235-4B06-11D1-AB04-00C04FC2DCD2/d79fa59c-74ad-4610-a5e6-b71866c7a157/internal.domain-name.com ServerName setspn -D HOST/ServerName.domain-name.com/internal.domain-name.com ServerName setspn -D GC/ServerName.domain-name.com/internal.domain-name.com ServerName setspn -D ldap/ServerName.domain-name.com/internal.domain-name.com ServerName Also, checking my dns records, there's an internal subdomain that I can delete but it comes back as well. I've tried removing the spns to no avail. Is there something I'm missing?

  Read the article

• I have bought a custom domain and am using it with Gmail. All My mail is being sent as spam. What can I do?

  - by Leonnears

  A while ago, I purchased my own custom domains for my websites. Before I moved them to Gmail, I just created the e-mails in my CPanel at Bluehost.com and worked from there. When the setup was like that, I could send and receive e-mail fine, and it wouldn't be marked as spam. Now I have moved these custom domains to send and receive e-mails at Gmail using Google apps. I have done everything. I have marked the domains as "Authorized" and I believe that should be enough for the mail I send with these custom e-mails is not send as spam. If it matters, I have configured my iPhone to use these custom domains with it and I'm sending all the e-mail from it. What can I do? I started doing all this today but apparently the DNS changes have already taken place. Is there something I have to do, or is it a matter of waiting 48 hours for my mail to not be marked as spam by other providers yet? EDIT: If I send mail via Gmail itself, the mail is delivered fine. If I use my iPhone however, it gets marked as spam.

  Read the article

• Why does the wireless network icon have a red X over it when everything seems to work?

  - by Kristo

  I booted my almost brand new laptop running Windows 7 this morning and noticed a red X through the wireless networking icon in the system tray. At first I thought something was wrong, but clicking on it shows a good connection to my wireless network. I had no problem getting here to post this question. I'm very new to Windows 7 so I have no idea how to troubleshoot this myself. Is there an actual problem here? Can I fix the icon so it doesn't falsely display an error (I assume that's what the red X means)? Here's what I know: I can get here to post this question. There's at least one unsecured network available that I'm not connected to. I can see a bunch of wireless networks, presumably from my neighbors' houses. There are no other computers turned on in my house right now. The device manager shows no problems with any devices. I can ping my default gateway, DNS, and yahoo.com with no problem.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

  Read the article

• How do i install apache on my ubuntu 12.04 where it has virtualhost

  - by YumYumYum

  According to the docs https://help.ubuntu.com/10.04/serverguide/httpd.html i have done following, and that is almost how i do always in my Fedora, but Ubuntu looks like its not working. a) DNS to IP $ echo "127.0.0.1 a" > /etc/hosts $ echo "127.0.0.1 b" > /etc/hosts b) Apache virtualhost $ ls 1 2 default default.backup default-ssl $ cat 1 <VirtualHost *:80> ServerName a ServerAlias a DocumentRoot /var/www/html/a/public <Directory /var/www/html/a/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> $ cat 2 <VirtualHost *:80> ServerName b ServerAlias b DocumentRoot /var/www/html/b/public <Directory /var/www/html/b/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> c) load into Apache and restart the service $ a2ensite 1 $ a2ensite 2 $ a2dissite default $ /etc/init.d/apache2 restart d) Browse the new 2 hosts $ firefox http://a Does not work it goes always with http://a or http://b to /var/www/html How do i fix it so that it goes to its own directory e.g: http://a goes to /var/www/html/a/public not /var/www/html?

  Read the article

• FreeBSD jail IMAP/MTA config recommendations

  - by kobame

  I've got access to my "own" FreeBSD jail. The jail has only basic, unconfigured system, but I have full access to FreeBSD ports, and (jail)root too. Now I need to setup my jail as IMAP/MTA. The question: What packages are EASIEST for config and later administration, (the simplest possible setup, with the minimum needed configuration) when: i haven't any preferences (don't know any yet) my (one) domain is managed by ISP, so don't need DNS need only IMAP for few users (up to 20 mailboxes) need secure transport layer (IMAPS/993) password auth, no LDAP, no kerberos, nor databases, nothing like fancy things... need easy-setup easy-admin MTA, with simplest possible password SMTP auth, (again no LDAP, nor DB), secure transport layer but would be nice have virus-scan and some anti-spam protection So, what ports I should install for MTA and IMAP? MTA (Sendmail, Postfix, Exim)? antivirus (ClamAV) antispam??? IMAP(S), (Dovecot, Courier) when the main criteria are: easy setup, and easy administration. When I googled I found only complicated setups for thousands of users with LDAP, databases and so on - too big-caliber for my small (easy?) needs. Any pointer to an easy howto is very welcomed.

  Read the article

• Mail Server using Postfix

  - by unknown (google)

  I have currently set up my web application on Amazon EC2 server. As a well known fact sending email from EC2 has a problem. As a cheap and long lasting solution instead of using "authsmtp" is it possible to rent a server and use it as a Mail Server? I am currently looking for cheap hosting which will give me root access so that it can be configured and used as a relayhost. I am curently using Postfix as MTA. Has any one implemented this before? I am curious about its feasibility of this solution. I guess common requirements are: 1: Dedicated IP which is not black listed. 2: Open relay( open to my Server only) Any Tips for Header configurations to keep the mails out of spam folder. This is like exactly cloning authsmtp for personal use. Any suggestions for other Mail Server software instead of Postfix? Another problem is Reverse DNS for this server. Should PTR entry be present if a server is used as a relayhost?

  Read the article

• After RAID failure SBS 2008 issues logging in and Exchange store does not mount

  - by Josh R

  today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

  Read the article

• Ping not working

  - by Nishant

  Ping is not working to and from this IP to my computer. inet addr:10.125.104.4 Bcast:10.125.111.255 Mask:255.255.240.0 My computer is like this Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.125.65.75 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 10.125.64.6 We both CAN reach the common gateway IP , 10.125.96.6 . What should I check ? What is the barrier in sending info if we both have a common gateway that is pingable ? Besides I can login to a intermediate server and ssh to this server also !!

  Read the article

• What are the typical methods used to scale up/out email storage servers?

  - by nareshov

  Hi, What I've tried: I have two email storage architectures. Old and new. Old: courier-imapds on several (18+) 1TB-storage servers. If one of them show signs of running out of disk space, we migrate a few email accounts to another server. the servers don't have replicas. no backups either. New: dovecot2 on a single huge server with 16TB (SATA) storage and a few SSDs we store fresh mails on the SSDs and run a doveadm purge to move mails older than a day to the SATA disks there is an identical server which has a max-15min-old rsync backup from the primary server higher-ups/management wanted to pack in as much storage as possible per server in order to minimise the cost of SSDs per server the rsync'ing is done because GlusterFS wasn't replicating well under that high small/random-IO. scaling out was expected to be done with provisioning another pair of such huge servers on facing disk-crunch issues like in the old architecture, manual moving of email accounts would be done. Concerns/doubts: I'm not convinced with the synchronously-replicated filesystem idea works well for heavy random/small-IO. GlusterFS isn't working for us yet, I'm not sure if there's another filesystem out there for this use case. The idea was to keep identical pairs and use DNS round-robin for email delivery and IMAP/POP3 access. And if one the servers went down for whatever reasons (planned/unplanned), we'd move the IP to the other server in the pair. In filesystems like Lustre, I get the advantage of a single namespace whereby I do not have to worry about manually migrating accounts around and updating MAILHOME paths and other metadata/data. Questions: What are the typical methods used to scale up/out with the traditional software (courier-imapd / dovecot)? Do traditional software that store on a locally mounted filesystem pose a roadblock to scale out with minimal "problems"? Does one have to re-write (parts of) these to work with an object-storage of some sort - such as OpenStack object storage?

  Read the article

• How to get Postfix to send/forward/relay to a sub-domain located on another server?

  - by thiesdiggity

  I have a quick question. How do I setup postfix to send an email to another server (Exchange Server) when sending to an email address that has a sub-domain of our main server. For example, say our main server is mail.example.com and we have a Exchange server setup to receive emails from exchange.example.com. We have the MX records setup in our DNS and it receives correctly if we send from a GMail account. However, when we try to send an email from a @example.com account we get the following error: Host or domain name not found. Name service error for name=exchange.example.com type=A: Host not found I believe Postfix checks for local mailboxes first and if its setup with the domain it delivers to the local account, but in this case the sub-domain accounts are located in another server. Anyone have any thoughts on what I need to do within Postfix so it doesn't look locally for the exchange.example.com mailboxes? I found relay_domains directive within Postfix but that doesn't seem to fix it when I add the sub-domain. Thanks for your help.

  Read the article

• IPTables configuration help

  - by Sam

  I'm after some help with setting up IPTables. Mostly the configuration is working, but regardless of what I try I cannot allow localhost to access the local Apache only (i.e. localhost to access localhost:80 only). Here is my script: !/bin/bash Allow root to access external web and ftp iptables -t filter -A OUTPUT -p tcp --dport 21 --match owner --uid-owner 0 -j ACCEPT iptables -t filter -A OUTPUT -p tcp --dport 80 --match owner --uid-owner 0 -j ACCEPT Allow DNS queries iptables -A OUTPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT Allow in and outbound SSH to/from any server iptables -A INPUT -p tcp -s 0/0 --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp -d 0/0 --sport 22 -j ACCEPT Accept ICMP requests iptables -A INPUT -p icmp -s 0/0 -j ACCEPT iptables -A OUTPUT -p icmp -d 0/0 -j ACCEPT Accept connections from any local machines but disallow localhost access to networked machines iptables -A INPUT -s 10.0.1.0/24 -j ACCEPT iptables -A OUTPUT -d 10.0.1.0/24 -j DROP Drop ALL other traffic iptables -A OUTPUT -p tcp -d 0/0 -j DROP iptables -A OUTPUT -p udp -d 0/0 -j DROP Now I have tried many permutations and I'm obviously missing everything. I place them above the in/out bound SSH to/from, so it's not the precedence order. If someone could give me the heads up on allowing only the local machine to access the local web server, that'd be great. Cheers guys.

  Read the article

• SSH hangs when executing command remotely

  - by Serty Oan

  Client : OpenSSH_5.1p1 Debian-5ubuntu1 (Ubuntu 9.04) Server : OpenSSH_5.1p1 Debian-5 (Proxmox 2.6.24-7-pve) I use SSH to execute commands remotely on the server (module check_by_ssh of Nagios). But SSH hangs from time to time when trying to execute commands. I can log to the server via SSH but not executing a simple 'ls'. And it seems to block from all clients from the same IP address. Authentication is not the problem, may it be made by SSH keys or password. ssh -l root -p 2222 server.domain.tld 'ls' Here the client debug info debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR *** skipping approx 40 env var ignored debug1: Sending command: ls debug2: channel 0: request exec confirm 1 It hangs there. Then after a random time, it works again (without doing anything). Killing all sshd process on the server seems to work too. It works from a Putty. I saw that some people had trouble like this due to ISP reverse DNS problem, but it does not seem to be the case here. It can work for hours and then not work for half an hour or so. What could explain this behaviour ?

  Read the article

• Rails application keeps timing out when attempting to connect to Postgresql DB

  - by Corillian

  I'm hosting a postgresql database on a small windows azure Ubuntu 13.04 VM with a default postgresql.conf. I have a Rails application running on a medium windows azure Ubuntu 13.04 VM. When accessing the postgresql database the rails application is constantly timing out. In its database.yml I have the connection pool size set to 120 and the timeout set to 15 seconds. Despite this my rails logs are full of the following error message: ActiveRecord::ConnectionTimeoutError: could not obtain a database connection within 5 seconds (waited 5.0023203 seconds). The max pool size is currently 120; consider increasing it. My postgresql.conf has a max connection limit of 120, making it any larger prevents the server from being able to successfully restart. I've also made sure that ssl was off in the postgresql.conf per this article but beyond that I have no idea what's going on. My postgresql logs don't contain any info indicating something is going wrong. My website is getting ~1k hits per day so perhaps a small VM instance just isn't powerful enough? I appreciate any assistance! [Edit1] The postgresql database is in a separate cloud service within the same affinity group. For example: db small VM: mydatabase.cloudapp.net (Affinity Group US East) forums medium VM: myforums.cloudapp.net (Affinity Group US East) On the database server I have opened port 5432. The connection to the database server from the forums server is using its hostname. Is it possible that the DNS resolution is what's taking so long?

  Read the article

• VirtualName-based local development host behind corporate proxy (MAMP)

  - by geerlingguy

  I am behind a corporate proxy server/firewall, and this firewall seems to not be too happy with my idea of local development. On my home computer (Mac/Leopard), I have MAMP running, with a rule in /etc/hosts that directs dev.example.com to 127.0.0.1, and I have a virtualhost set up in the httpd.conf file which works great for me. However, at work, I set up the exact same configuration, but am not able to access dev.example.com, likely due to some address/DNS translation going on via the proxy server. Here are the relevant details from Terminal: $ ping dev.example.com PING dev.example.com (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.025 ms $ host dev.example.com Host dev.example.com not found: 3(NXDOMAIN) I've tried adding dev.example.com to the list of bypass addresses in System Preferences (the 'Bypass proxy settings for these Hosts & Domains' list), but that had no effect. Is there any way I can develop locally using name-based hosts at work? I can access localhost, but can't get to the dev.example.com (or any other custom virtualhosts) here at work, which complicates other matters related to the sites on which I'm working...

  Read the article

• named responding recursive on norecurse queries

  - by Keks

  I have a server on which named is running. It is intercepted with another named server which it is not aware of. Querying the first named server results in timeouts. The server tries to resolve the query recursively. During that the firewall redirects the DNS Request from the first named server to the second one (the query from the first one is addressed to a e.g. a root server and has its "Recursion desired" bit set to 0). Despite that the second named responds to this request with a entirely or at least 1 level more resolved response than the first named server expects. So it ends up with a timeout even though it got a correct name server or even the full IP for the queried domain. In the first case the first name server tries to follow the authority domain ignoring the coresponding glue record and ends up in a loop it aborts: queried: google.com -> got from named#2: ns1.google.com -> ignore glue record and query: ns1.google.com -> got authority from named#2: google.com In the second case it ignores the answer section with the correct IP and instead tries to follow the name servers from the authority section, which ends up in the same dead end as case 1. So how can it be that the second named responds with recursive results even though the bit was explicitly set to 0 in the request from the first named?

  Read the article

• How to configure iptables to use apt-get in a server?

  - by segaco

  I'm starting using iptables (newbie) to protect a linux server (specifically Debian 5.0). Before I configure the iptables settings, I can use apt-get without a problem. But after I configure the iptables, the apt-get stop working. For example I use this script in iptables: #!/bin/sh IPT=/sbin/iptables ## FLUSH $IPT -F $IPT -X $IPT -t nat -F $IPT -t nat -X $IPT -t mangle -F $IPT -t mangle -X $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP $IPT -A INPUT -i lo -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A INPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 22 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 80 -j ACCEPT $IPT -A INPUT -p tcp --dport 443 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 443 -j ACCEPT # Allow FTP connections @ port 21 $IPT -A INPUT -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT $IPT -A OUTPUT -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT # Allow Active FTP Connections $IPT -A INPUT -p tcp --sport 20 -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -p tcp --dport 20 -m state --state ESTABLISHED -j ACCEPT # Allow Passive FTP Connections $IPT -A INPUT -p tcp --sport 1024: --dport 1024: -m state --state ESTABLISHED -j ACCEPT $IPT -A OUTPUT -p tcp --sport 1024: --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT #DNS $IPT -A OUTPUT -p udp --dport 53 --sport 1024:65535 -j ACCEPT $IPT -A INPUT -p tcp --dport 1:1024 $IPT -A INPUT -p udp --dport 1:1024 $IPT -A INPUT -p tcp --dport 3306 -j DROP $IPT -A INPUT -p tcp --dport 10000 -j DROP $IPT -A INPUT -p udp --dport 10000 -j DROP then when I run apt-get I obtain: core:~# apt-get update 0% [Connecting to ftp.us.debian.org] [Connecting to security.debian.org] [Conne and it stalls. What rules I need to configure to make it works. Thanks

  Read the article

• mail server checklist..

  - by Jeff

  currently we ran into some issues with our mail server setup. im preparing a list of actions that we should enforce and use in order to maintain a proper email solution within our company. we have around 80 exchange users, and send mass emails out almost on a monthly bases to 20,000 + customers each time.. the checklist i currently have: 1) mcafee mxlogic 'cloud' anti-spam functionality for incoming message. 2) antivirus on each computer in company 3) antivirus on exchange and DNS servers 4) setup SPF record 5) setup DKIM 6) setup domainkey 7) setup senderID 8) submit spf to microsoft, yahoo, etc. for 'whitelist' purposes. 9) configure size limits for messages in exchange to safe numbers 10) i have 2 outside IPs for my email server, incase one gets blacklisted, switch to the backup. 11) my internet site rests on a different ip than the mail server 12) all mass emails for company sent through 3rd party company (listtrak.com) 13) setup domain alias, media, enews, and bounce for the 3rd party mass mail software. 14) verify the setup using [email protected] 15) configure group policy and our opendns.org account to prevent unwanted actions and website viewing mass emails: 1) schedule them to send different amounts at different times (1,000 at 10am, 1,000 at 4pm, 1,000 10am next day).. 2) setup user prefences, decide what they want to receive ect. ( there interests) 3) send a more steady flow of email, maybe 100 a week with top new products instead of 20,000k every other month.. if anyone has suggestions or additions/subtractions to this checklist they are greatly appreciated. thank you

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >