Search Results

Search found 20970 results on 839 pages for 'real mode'.

Page 165/839 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

  • Getting "GRUB loading ... no such partition"?

    - by shameedp
    I am having a dual os, windows 7 and linux, the c drive have 20 GB, in which 5 GB is allocated for windows 7 (original) and 15 gb for linux since the spacing for windows is very low i used EaseUS partition manager and deleted my linux OS, and merged the unused space into my C drive, now it becomes 20GB, the things, after the reboot, I am getting GRUB loading. Welcome to GRUB! error: no such partition. entering rescue mode. . . Kindly help me guys the problem i am facing is i dont have a DVD drive to resolve it, using recovery mode. Waiting for your reply guys. in ls command i have (hd0) (hd0,msdos8) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1)

    Read the article

  • Abnormal hangs and restarts Ubuntu 8.04

    - by jai-ho
    Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

    Read the article

  • delete key on linux does not work

    - by Gauthier Fleutot
    Hi! My delete key does not work in ubuntu, it does nothing. I understand that this is a common problem, but I could solve it with the information I found elsewhere. I ran xev. Pressing the 'a' key gives: KeyRelease event, serial 30, synthetic NO, window 0x2c00001, root 0x1a6, subw 0x0, time 7255643, (-113,-107), root:(425,300), state 0x2010, keycode 38 (keysym 0x61, a), same_screen YES, XLookupString gives 1 bytes: (61) "a" XFilterEvent returns: False Pressing 'Delete' gives: FocusOut event, serial 30, synthetic NO, window 0x2c00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 30, synthetic NO, window 0x2c00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 30, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 From there I don't know what to do. Help?

    Read the article

  • Which OS/distributions have 64-bit kernel and 32-bit userspace? [closed]

    - by osgx
    Which OS (or distributions) comes with 64-bit kernels (x86_64, SPARC64, PPC64, ..smth else?..) and 32-bit userland? I want all small userspace programs (like ls, cat, etc) to be 32-bit, because they really no needs to be 64-bit. But OS kernel must be 64bit for using =3 Gb of RAM. Also database programs (when using a lot of memory) can be 64bit. 64bit mode can hurt some programs, makes them bigger, eating (wasting) memory on pointers (especially in big abstract datatypes like list, tree, etc). 64 bit programss WASTES twice memory on EACH Pointer. I don't want it. And the Question is not "Are the 32-bit programs needed when 64-bit porcessor is available". Question is "What OS comes with 32 bit userspace and kernels in 32/64 bit mode". Examples of such OS includes: Solaris/SPARC64, MACOSX/X86_64 (10.5)/....

    Read the article

  • Virtual Machines: What components should I upgrade to improve running virtual machines?

    - by joshsvoss
    at work I need to have one or sometimes two instances of a vmware virtual Windows 7 machine running on my real Windows 7 machine. The computer I'm using is Dell Precision 490 from 2009 I believe, possibly earlier. Running Windows 7 ultimate. Problems while running VM's: The entire computer slows down when a vmware instance is running. Pages take a while to react to a scroll, applications take forever to launch, and programs hang both in the virtual machines and on the real one. So, what components should I upgrade to improve this? I guess a more pointed question would be, which components will help the most? Possible options: Getting 8gb of RAM instead of 4gb new graphics card new processors? (Is that really an option?) My intuition tells me it will be a combination of the RAM and graphics card. There is also the possibility that an '09 tower just isn't cut out for vm's and our business should purchase a new tower.

    Read the article

  • Connectiong adsl router/modem and router with bridgemode

    - by Zvonko Telefonko
    I have one adsl modem/router which is not "top" of the line and it lack allot of options which I need. I was able to acquire one Cisco router recently which has all options that I need ( like DMZ, VPN, port forwarding, etc). I'm interested, if I connect the old modem/router to new Cisco router using bridge mode, will I be able to use all the features on the Cisco? For instance, the old router is lacking of port forward options. Does this mean that I will not be able to use port forwarding on Cisco router either or, since I will be using bridge mode, this will not affect Cisco router and it will work as the modem is in him? thank you

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM [closed]

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • Howto return to virtual machine when remote desktop hangs?

    - by tangens
    I'm using a vmware virtual machine running ubuntu linux and from there I connect to a Windows XP machine using rdesktop through a VPN tunnel. This configuration is given and cannot be changed. From time to time my internet connection does a reconnect. Then the running rdesktop (running in fullscreen mode) process freezes and isn't usable anymore. Now I want to return to the underlying linux and restart the rdesktop process. But I'm not able to get out of fullscreen rdesktop mode and so I cannot access the ubuntu desktop to kill any process. My solution is to reboot the vmware and start the rdesktop again. Is there a better way to get the configuration running again after a freeze? EDIT: I have no admin rights for the linux system. Everything must be done with user rights.

    Read the article

  • How to make sure that grub does use menu.lst?

    - by Glen S. Dalton
    On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

    Read the article

  • Intel turbo boost - in reality

    - by gisek
    I have an Intel i7-3630QM processor in my laptop. Its speed is supposed to be from 2.4 to 3.4 GHz in turbo boost mode. In reality, will it ever run all cores on full speed (3.4GHz mentioned above) at the same time? I heard somewhere that this additional 1GHz is shared between all cores in laptops. If the boost is 1GHz per core it's pretty impressive (over 40% speed up). What does it really look like? How long can a processor run in turbo mode?

    Read the article

  • moving from Exchange 2003 to Exchange 2010

    - by pcampbell
    Consider a small-medium business' deployment of Exchange 2003. The question is around migrating to Exchange 2010. Here's a bit about the landscape: Current state is 50-100 users/mailboxes with the majority using Outlook 2007 OWA enabled desktop users are NOT running in Cached Exchange Mode laptops users ARE running in Cached Exchange Mode a single Exchange server with modest or reasonable specs for the day (3gz, multi-core, 4gb, Win 2003 32-bit) Questions Do you have any suggestions for the admin team regarding the upgrade path/steps from Exchange 2003 to 2010? Considering the requirement of a 64 bit OS, consider a new separate machine as ready to go with Win 2008. Have I missed any details? Where might virtualization help in this project? Any lessons learned in previous upgrades (2007 or 2010) would be appreciated!

    Read the article

  • LVS Configuration issue (Using piranha Tool)

    - by PravinG
    I have configured LVS on cent os using piranha tool .I am using vip of internal n/w as gateway for real server we have two NIC one having exteranl Ip and other for internal n/w which is on 192.168.3.0/24 network. But I am not able to connect from client it shows connection refused error . Please suggest iptables rules for private n public n/w to communicate. May be I am missing this . Iptables rules that we have added are : iptables -t nat -A POSTROUTING -p tcp -s 192.168.3.0/24 --sport 5000 -j MASQUERADE this is my ipconfig: eth0 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.133 Bcast:122.166.233.255 Mask:255.255.255.0 inet6 addr: fe80::200:e8ff:fef6:74da/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94433 errors:0 dropped:0 overruns:0 frame:0 TX packets:130966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9469972 (9.0 MiB) TX bytes:19929308 (19.0 MiB) Interrupt:16 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:00:E8:F6:74:DA inet addr:122.166.233.136 Bcast:122.166.233.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:20ff:fe14:f92d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:123718 errors:0 dropped:0 overruns:0 frame:0 TX packets:148856 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18738556 (17.8 MiB) TX bytes:11697153 (11.1 MiB) Interrupt:17 Memory:60000400-600004ff eth1:1 Link encap:Ethernet HWaddr 00:E0:20:14:F9:2D inet addr:192.168.3.10 Bcast:192.168.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:17 Memory:60000400-600004ff eth2 Link encap:Ethernet HWaddr 00:16:76:6E:D1:D2 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:21 Base address:0xa500 and ipvsadm -ln command [root@abts-kk-static-133 ~]# ipvsadm -ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 122.166.233.136:5000 wlc TCP 122.166.233.136:5004 wlc lvs server routing table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 122.166.233.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 eth1 0.0.0.0 122.166.233.1 0.0.0.0 UG 0 0 0 eth0 real 1 real 2 we have configured various ports from 5000:5008 . Do we need to this iptables for all ports? Suggest me how should I solve this issue.

    Read the article

  • Windows Server 2003 Standby/Sleep Results in Cold Boot when Resuming

    - by Simon Chadwick
    I'm running Windows Server 2003 sp2 on a Dell Inspiron e1705. There has never been a problem going to standby/sleep mode (by closing the laptop lid, or from the Start menu), and then resuming later. Today I did a Windows Update to install the latest patches and fixes. I don't know if there is a correlation, but now when I resume from standby/sleep mode, the machine does a cold boot. The AC adapter is connected. The battery is 2 months old, and all its LEDs light up when pressing its test button. The Power Management shows it at "99% (charging)" all the time. There is nothing suspicious in any of the event logs. Any ideas?

    Read the article

  • VMWare Player guest does not re-aquire IP on bridged interface after host loses and re-acquires network connectivity

    - by Vineet
    I am running a Ubuntu Linux image in VMWare Player on my laptop. The host is Windows XP. There are two network adapters configured in VMWare Player - one is host-only and the other is bridged. Everything works fine as long as the host does not lose network connectivity. If the host loses connectivity (even briefly) and then re-acquires it, my bridged adapter in VMWare Player is still unable to get an IP address. The host-only adapter remains unaffected. Disconnecting/Reconnecting the bridged adapter does not help. Simply restarting the guest OS does not help. Restarting VMWare Player does not help. The only remedy is to reboot the host and then bring up VMWare Player all over again. Is there something I can try to avoid this reboot? I searched the existing questions but they seemed to talk about adapters in NAT mode, whereas I am interested in retaining Bridged mode.

    Read the article

  • Can Resource Governor for SQL Server 2008 be scripted?

    - by blueberryfields
    I'm looking for a method to, in real-time, automatically, adjust Resource Governor settings. Here's an example: Imagine that I have 10 applications, each hitting a different database on the same database machine. For normal operations, they do not hit the database very hard, so I might want each one to have 10% CPU power reserved. Occasionally, though, one or two of them might spike, and run an operation which could really use the extra power to run faster. I'd like to be able to adjust to compensate (say, reducing the non-spiking apps to 3%, and splitting the difference between the spiking apps). This is a kind of poor man's method of trying to dynamically adjust resource allocation and priorities. Scripts (or something script-like) is preferred, since the requirement is for meta-level adjustments to be possible in real-time, also.

    Read the article

  • Random BSODs on Win7 boot. Can't find a valid reason.

    - by 0plus1
    Hi, I bought and assembled a new pc: ASUS m4a785td-v EVO AMD x4 620 OCZ Black Edition 2x 2gb WD 500gb sata Win7 Ultimate 64bit fresh install BSOD on boot. Formatted, reinstalled, BSOD on install. Ran memtest - no errors. Ran Win7 install in safe mode. Installed, random BSOD on win7 startup, even in safe mode. Updated BIOS. Ran the win7 memtest (no error), booted after some tries and ran Prime95 blend test for 12 hours straight with no errors at all! When the pc has booted, win7 runs as smooth as possible, I've been playing STALKER for 4 hours straight with not a single hiccup. Using Blue Screen View I can see that every BSOD involves: ntoskrnl.exe Here are the dumps Any help would be greatly appreciated, this thing is driving me crazy.

    Read the article

  • Make cloudera-vm work on Oracle VM VirtualBox

    - by ????? ????????
    I downloaded this and the instructions say: Important: You must enable the I/O APIC in order to use 64-bit mode. (See http://www.virtualbox.org/manual/ch03.html.) On newer versions of VirtualBox, it may default to using SATA as the disk interface. This can cause a kernel panic in the VM. Switching to the IDE driver solves this problem. I am running this on Red Hat 64-bit mode (I've also tried on Ubuntu 64-bit with the same result). I pointed to the cloudera-vm image as a startup disk for the VM. I am getting this message: Failed to open a session for the virtual machine ClouderaDevelopment. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} Does anyone know what I am doing wrong?

    Read the article

  • What's the downsides of Running Ubuntu 9.10 32bit on AMD64 Processor

    - by Omar Dolaimy
    Hi, I was thinking about installing Ubuntu 9.10 32bit on a DELL Inspiron 1501 with 64bit processor Laptop. Since It's was real pain to me to run Java Browser plugin, Flash Plugin, J2ME Toolkit, and many other tools. But It was 90% OK with me. This was Ubuntu 8.10 (a year ago), And now the Ubuntu 9.10 came and I'm thinking about installing the 32 bit on it and get rid of the pain. Is there a downside for that?? considering that the display card is not supported now so exclude this from your calculation, I will never play REAL games on it and I'm not a big fan of Compiz effects. I'm not here to ask about the performance (which is about 15%+ for the 64bit only), I just want compatibility!

    Read the article

  • Do you have any additions or alterations to this list of popular audio formats?

    - by roja
    All, I am trying to compile a list of common audio file formats used in both personal storage and peer transmission. I have compiled the following list, do you think that there are any significant formats missing? Are any of them not actually common formats? Any advice/alterations are highly useful. advanced audio coding, apple lossless audio file, atrac3 audio file, atrac audio file, audio interchange file format, core audio file, free lossless audio codec file, mpeg 1 audio layer 3, mpeg 2 audio, mpeg 4 audio book file, musical instrument digital interface, ogg vorbis compressed audio file, open media framework file, real audio, real audio media, waveform audio file format, windows media audio Kind regards, Roja

    Read the article

  • Bridging Network Devices with Multiple IPs

    - by Andy
    I have a small server with a single NIC that I am trying to get a bridge functioning on so that I can run KVM. On this NIC I have a couple IPs statically assigned to it: eth0 = 192.168.1.1 eth0:1 = 192.168.1.2 eth0:2 = 192.168.1.3 eth0:3 -> Assign the bridge to this I am attempting to set up a bridge using the following instructions: sudo brctl addbr br0 sudo brctl addif br0 eth0:3 sudo ifconfig br0 192.168.1.120 netmask 255.255.255.0 up sudo route add -net 192.168.1.0 netmask 255.255.255.0 br0 sudo route add default gw 192.168.1.1 br0 sudo tunctl -b -u root -t tap0 > /dev/null sudo ifconfig tap0 up sudo brctl addif br0 tap0 However, when I do the second command: sudo brctl addif br0 eth0:3 It puts the ENTIRE eth0 device into promiscuous mode. This knocks the server offline and inaccessible by anything other than locally. Is there a way to bridge JUST eth0:3 to br0 and not put the entire device into promiscuous mode?

    Read the article

  • Apache proxy is modifying the HTTP status code

    - by jarnbjo
    I am using Apache as a proxy frontend for a Java web application, which is deployed on WebSphere. The web application is using custom status codes (55x) to signal specific errors to the clients. When accessing the web application directly through the WebSphere HTTP listener, everything works as expected, but when these requests are proxied through an Apache load balancer, the status codes are modified by Apache and replaced with a generic 500 error code (internal server error). In Apache's access.log, the correct status code is logged: <IP> - - [11/Nov/2011:17:24:53 +0100] "POST <URL> HTTP/1.1" 551 36 But the actual response received by the client starts like this (logged with tcpdump): HTTP/1.1 500 Internal Server Error ... Followed by the real status code in the response content: ... Error 551: Berichteter Fehler: 551 ... Is there an obvious reason for this behaviour or does someone have a suggestion on how to modify the Apache configuration to forward the "real" status code instead of 500?

    Read the article

  • IE8 Compatibility View issues

    - by 08Hawkeye
    I have the IE7 emulater tag in a jsp layout. But when I bring up the page, it defaults to the IE8 view until the user clicks the Compatibility View button. I don't want the user to have to click the button to launch compatibility mode. Is there a way to force IE7 Emulation on pageLoad? I'd even like to disable the button (or any potential to toggle between IE8 standard mode/IE7 view). Thanks! //sw Update: Now the button seems to have disappeared entirely, but still defaults to IE8 standards. Where did it go?! The toolbar context menu has it as selected, but the tools dropdown menu has it grayed out. For my purposes, it is unacceptable for the user to have to use the developer tools or even click the button to trigger emulation, but I don't know why the button disappeared anyway...

    Read the article

  • What does the "Maximum Frequency" number mean in the Windows Resource Monitor?

    - by nhinkle
    In the Windows Resource Monitor's CPU tab, there is a status box and graph for the "Maximum Frequency", right next to the "CPU Usage" values. What does this mean? The value is sometimes over 100% on my system... what could that imply? By looking at CPU-z's real-time report of the processor's clock speed, it seems to be loosely related to what frequency the CPU is running at, which would imply that it means "percent of maximum possible frequency the CPU is running at"; this would be of relevance on systems with SpeedStep and/or TurboBoost technology (or similar). Furthermore, setting the system to "power saving mode" lowers the "maximum frequency" value to around 60%, while setting it to "high performance" mode sets it to around 110%. However, the percentage does not seem to exactly correlate to the CPU speed being shown. What value is this actually representing then?

    Read the article

  • Utilize different region format for a single application on Mac OS X

    - by Jeff Hellman
    Is there a way to have a single Mac OS X application utilize a different region format than the system default? For example, I'd like to keep my system operating in English with US date formats but have my lesson planning software utilize French date formats. If I put my entire computer into French mode, I get the desired results, but I'd rather keep my entire system in US mode and have the Planbook application work with French region formats. I know about Language Switcher but that only allow per-app selections of localizations to be used, not which date format to use. I don't care about having the French localization of Planbook appear, I just want the date format to be French.

    Read the article

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >