Search Results

Search found 6897 results on 276 pages for 'samsung mobile'.

Page 165/276 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• TV network capabilities.

  - by Narcolapser

  Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Why does text look so Horrible on my HD monitor?

  - by Laura

  I just bought a 1080p 22" Samsung Syncmaster 2333HD (connected via HDMI) and the picture and video quality is great but the text quality is absolutely horrible. This monitor has a built in HD TV tuner. Even as I type now all the text in this text box as well as in the browser toolbar and start menu, etc looks weird - like it all has a white outline around it that makes it jagged and hard to read. It hurts my eyes just to look at it. I am running my PC in the suggested native resolution of 1920x1080, so what's the problem? Is this one of the unavoidable downsides of using a HD monitor? Is there a solution to the problem?

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• Shortcut Keys for external monitor with XP

  - by Rhys

  Last night my laptop (samsung nc20 running XP) fell off the table and the screen cracked leaving me unable to see anything. I have arranged for a it to be repaired but want to make a back up of several folders before it gets sent away. I was planning to use my parents LG LCD tv as an external monitor so I can see what I am doing when copying things to but after plugging it in nothing seems to happen (works instantly on another laptop running vista) and hotkeys seem to be of no use at all. Does anyone know the series of shortcut keys I will need to do to get XP to use an external monitor? Thanks in advance

  Read the article

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• ATI AMD Radeon 6670M 2GB Dual External monitors

  - by kellax

  I have HP Pavilion dv7 BeatsAudo model: dv7-6b with following specifications: CPU: Intel i7-2670QM ( Quad Core ) 8 CPU's @ 2.2Ghz RAM: 8GB @ 1066 GPU: ATI Radeon HD 6770M 1GB Notebook has two slots: HDMI and VGA On my VGA i have an external monitor 24" Samsung, any idea if my notebook could support a second external monitor as well. I do a lot of development work, i havent got a second monitor to test it yes but i know there can be problems. I would like to have a monitor connected on my VGA and on my HDMI so two external monitors and notebooks monitor. Would this be viable ?

  Read the article

• How can you configure the uPnP server on windows home server?

  - by pschorf

  I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

  Read the article

• sata2 hdd not reported correctly on gigabyte mobo

  - by hyperboreean

  hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

  Read the article

• Locking down firmware to keep stolen laptop from being formatted?

  - by Matt Ridge

  On the Mac laptops there are ways through the terminal to lock down the computer so that if someone tries to format the computer they won't be able to do it without the password. This way locks down the firmware. Is there a universal way to do the same thing on a PC? I know there are brands out there such as Samsung, Dell, etc that utilize different fimware types, and in turn will mean that their firmware will be locked down differently. That being said is there a "command code" that will allow you to lock the firmware to keep theives from formatting the hard drive and wiping out your data? I know a person who has time, and knowledge can get any password, and hopefully the person is smart enough to use another password to lock down the firmware, but that's not what I'm asking. I'm asking if it's possible, and if so how? Does the standard PC user require a 3rd party app, or can it be done through the command line? Or Terminal if you are on Linux?

  Read the article

• Android tethering via bluetooth keeps disconnecting

  - by Ian

  I'm currently using a Google Nexus tablet tethered via Bluetooth to a Samsung S3 for internet. Two things are annoying me. First, if I take the phone away from the tablet (go out for lunch), the tablet disconnects and has to be manually reconnected. Is there a way to have that happen automatically? Second, Bluetooth tethering, i.e. the internet sharing part needs to be switched on each time the bluetooth is switched on (or perhaps just after power cycling) on the S3. Is there no way to have that default to on? Thanks

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• Is it possible to clone system drive in Windows 7?

  - by Ladislav Mrnka

  My current problem is that my Window 7 system drive is unstable. I would like to try to clone this drive to the same type of disk (OCZ Vertex 2 120GB to OCZ Vertex 2 120GB) and replace the system drive with created clone. My installation doesn't have ProgramData and User profiles on the system drive. Later on (after warranty replacement of problematic drive), I would like to copy ProgramData and User profiles to different disk (Samsung SpinPoint 750GB to OCZ Vertex 2 120GB) and use the new disk instead. Note: data have only few GBs so there should not be any problem with the disk size. Is it possible? What is the best way to do that? Is it better to simply reinstall the system from scratch (I would like to avoid it)?

  Read the article

• Custom PC won't boot Windows 7 dvd but does with windows vista

  - by M_rk

  I ordered a custom build PC. (It was assembled by the store). This is the setup Motherboard: Asrock A75 PRO4-M DVD drive: LG GH24NS90 SSD: Samsung 830 series 128GB DDR3 SDRAM: 2× Corsair XMS3 CMX4GX3M1A1600C9 (2× 4GB) APU (CPU+GPU): AMD A8-3850 Boxed I got a installation DVD for Windows 7 Professional x64 English (including SP1), but it doesn't work. I got a new one from the store and it doesn't work either. However they work on a other PC. So the DVDs aren't bad. I tried an old installation DVD for Windows Vista. Both 32 bit and 64 bit work. So the boot order and such are right and working on the new PC. Is there something I'm missing here? Any ideas on how to make it work?

  Read the article

• Windows 7 Remote Desktop with dual monitors wont wake up.

  - by dev5

  I run Windows 7 64bit with dual monitors at work. If i connect from home using remote desktop, the next morning i cannot wake up the monitors. The computer seems to be fine (i can connect again from another pc using remote desktop) but monitor will stay blank. I've tried unplugging the monitors and reconnecting them but still frustrating. The only solution is to restart the machine. Some specs if it helps. HP 3000 Pro Windows 7 Pro 64 bit ATI Radeon HD 4550 Samsung SyncMaster 2243 x2

  Read the article

• SSD runs faster on Windows as compared to Linux [closed]

  - by wushugene

  Windows 7 seems to install, boot and run much smoother & faster than each the three linux distros I have recently tried (Ubuntu 12.04 unity, Linux mint 13 MATE, and Fedora 17 on gnome 3.4). Why am I facing bad performance in Linux? I have tweaked my Linux installs for the SSD (enabling trim, disabling swap, etc.) I'm using an Acer TravelMate with i5-2410m processor, intel hd 3000 graphics, 8 gigs of ram, and a 256 gb samsung 830 ssd. Edit: Boot times are 10-15 seconds slower, there is noticeable delay from login to fully loaded desktop, and in general does not appear to be as responsive as my old windows 7 install or the Linux guests I had running on it.

  Read the article

• copy WinXP Home recovery files to new SSD

  - by maGz

  My wife's Samsung netbook, which has Windows XP Home Edition OEM and a 5400 SATA 2 HDD, has finally crawled to (almost) a halt, and I've decided to install an OCZ SSD into it. The problem is that the machine came with no recovery media, but the recovery partition exists and I can boot into it. How can I go about creating a bootable DVD from that partition, and then boot off that to install on the SSD? NOTE: My aim after this is to upgrade to Windows 7 Home Premium, as the upgrade option is a lot cheaper than purchasing a retail or DSP equivalent.

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• How do I connect a laptop running Windows 7 to an Android phone using WiFi Direct?

  - by user130768

  From where I am sitting, Windows 7 does not appear to support WiFi Direct connections to Android mobile devices. Specifically, turning on WiFi Direct on my Samsung Galaxy S II does not make the device visible as a potential WiFi network connection. Windows 8 is said to support WiFi Direct, but I have no desire to upgrade at this time. I have successfully set up ad hoc WiFi connections between the S II and my laptop before, but as you may be aware, these are not the same as WiFi Direct. Before posting this question, I searched [ "Windows 7" "WiFi Direct" ] and variations thereof, and dutifully slogged through dozens of lame or irrelevant responses on various forums, badly made YouTube videos, and probable Trojan horse distribution sites. If someone out there knows how to do this, it's buried in the noise.

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• Linking two networks that have a common device

  - by Serban Razvan

  I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by user7651

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >