Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 165/281 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• How do I get a D-Link DWL-G520 working?

  - by human33

  I have Ubuntu 12.04 on an older desktop PC, and I am finding it much harder to connect to a wifi connection than it should be. I have an iPhone with which I want to tether to it with Mifi 4.0, but I need to install ipheth which I can't do without internet on that computer. I am typing from my other windows pc with which i can download and move hings with thumb drives, but haven't gotten keryx to work. I also found a D-Link DWL-G520 HIGH SPEED 2.4GHZ (802.11G) WIRELESS 108MBPS PCI ADAPTER which I installed, but can't find a driver to put on a flashdrive to use it. If anybody has any ideas, they are appreciated. I am a noob, and I don't want to have to move the comp. downstairs to plug into the modem. PS: I also have a netgear USB network adapter, which doesn't work with my Ubuntu.

  Read the article

• Using Ubuntu with a dial-up connection

  - by Robert Heller

  Is it possible to install Ubuntu on a machine with only a dial-up connection? That is, does the Ubuntu install CD come with everything needed to set up an Internet connection using a dial-up modem (I have a USRobotics Courier V.Everything connected to a RS232 port on a Lava Quattro-PCI). I presently run CentOS (5.9), which does include support for dialup Internet access out-of-the-box (all of the modules for dialup are on the distro DVD). When I ran the UBuntu CD (12.04.1 desktop), there was no sign of dial-up Internet support. Am I faced with a chicken or egg problem?

  Read the article

• BCM4313 wireless not working on Dell Inspiron 4010

  - by Mandar

  I have Ubuntu 11.10 installed today and trying to connect to wireless but its not working. It has been working correctly on my Windows 7. i am pretty new to Ubuntu. I tried suggestions listed in this forum but nothing seems to be working for wireless. It shows wireless card listed when I do- sudo lshw -C network: It displays wireless interface as BCM4313. my laptop- Dell Inspiron 4010 Ubuntu- 11.10 Any suggestions? It works when I connect LAN cable to same modem.

  Read the article

• Installing Realtek rtl-8192ce on Ubuntu 9.4

  - by dutchman79

  I followed the below steps to install my rtl8192ce drivers on my Ubuntu 9.4 system. But I still got errors and nothing installed and I can't connect to the modem to get onto the Internet. Can someone please help me? Move the file you downloaded to your home directory using your file manager or terminal mv [destination of downloaded file] /home/[username] Now we move to our home directory and Unzip the file using the following command or right click and select Extract here: cd /home/user tar xvjf rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013(1).tar.bz2 Now access the Directory which we extracted cd rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013(1) Next we install the necessary dependencies to compile the driver sudo apt-get install gcc build-essential linux-headers-generic linux-headers-$(uname -r) Now we start the compilation make and then sudo make install Execute modprobe rtl8192ce Now If all went right your system should be running the wireless driver."

  Read the article

• OVH se lance dans le haut débit pour les entreprises, via des liaisons SDSL à 80 Mbit/s symétriques

  OVH se lance dans le haut débit pour les entreprises, via des liaisons SDSL à 80 Mbit/s symétriques Mise à jour du 24.12.2010 par Katleen OVH vient d'annoncer sa première offre d'accès Internet professionnelle en haut débit : « OVH vous raccorde à une paire de cuivre, pour un débit maximum de 5 Mbit/s, au tarif mensuel de 24,99 euros HT, explique le prestataire. Vous avez la possibilité de souscrire à l'offre avec 1, 2 ou 4 modems avec 1 paire, 2 paires ou 4 paires de cuivre pour chaque modem, et donc d'obtenir un débit maximum de 80 Mbit/s. » Pour cette activité de FAI, OVH a crée une filliale dédiée : GFK. Et son offre aurait déjà reçu plus de 100 souscriptions à Lille et environs, où la phase de b...

  Read the article

• Hosting a website from a dynamic IP

  - by nick

  I recently upgraded my internet to the point that it is much faster and more reliable than my current webhost. I would like to move my current domain to be hosted at home, but my IP address is dynamic. As far as I know, I only get a new IP when I restart my modem and or router (which is almost never) or when cable one (my ISP) pushes out a firmware update (rarely). There are a few ways I can see doing this 1) convince my ISP to give me a static IP 2) assign my router my current IP to force a static IP (which might work?) 3) set my dns record to my current IP address and update it on the rare occasions that it changes. Obviously I'm hoping that the first one works, but I don't want to pay a lot of extra money (if that's what it takes) to get a static IP address. Has anyone had any luck with something like that?

  Read the article

• Chrome OS : nouvelle mise à jour et ajout de la bêta de Chrome 10 dans l'OS orienté Cloud de Google

  Chrome OS : mise à jour Et ajout de la bêta de Chrome 10 Google vient d'effectuer une mise à jour de la bêta de son système d'exploitation Chrome OS avec le port de la bêta de son navigateur Chrome 10 publié il y a de cela quelques semaines. Plusieurs fonctionnalités de Chrome OS ont été améliorées parmi lesquelles la 3G (activation du modem et connexion), le WI-FI, Gtalk (pour les vidéo-conférences) ou la mise à jour automatique du moteur et amélioration du débogage ; A noter que des problèmes important de gestion des Trackpads (système qui remplace les souris sur les PC portables) ont été réglé. Ce...

  Read the article

• How to create a temporary staging server on my home machine [closed]

  - by Homunculus Reticulli

  Possible Duplicate: What things required to host a website at home I want to create a temporary staging server which can be accessed (i.e. via browser) by other people that I want to show the website to (a business partner who is half way accross the world). IIRC, my ISP issues dynamic addresses so I may need to register with a (DNS server?) - not sure about this. Although I'm a software developer, I don't know much about the hardware side of things - and would appreciate help in getting me setup so I can show a website to a business partner. Here are the relevant details: Web server: Apache 2.2 OS: Ubuntu 10.0.4 LTS modem/router: ZyXel P-600

  Read the article

• ubuntu will not connect after restart

  - by nicedoggy

  Firstly, I hope this hasn't been covered elsewhere, I have searched but haven't found this particular problem. I updated to 12.04 a while back and though I now thoroughly regret that decision, I'm able to live with 12.04 and all it's odd little quirks. The one problem that I would like to fix is this. I have a small network, using a router modem which stays on most of the time. If the computer is switched off, when it is switched on again I have to click on "auto Ethernet" in "Network" in order to get on the internet. It then works fine. Previous versions just connected automatically on restart. When 12.04 says it is unable to connect, other computers on the network are able to connect. Thanks for any help.

  Read the article

• how to download and install from the internet >> skype and realplayer

  - by ADAM

  i had corrupted win7 by dead blue screen and stopped rebooting or installing or safe mode. just death i installed linux unubtu one i still unable to install my wireless stick modem for surfing internet wirelessly form my provider vividwireless i don't know where or how to download porg and app from the net like real player and skype and others and to intall them. even i cannot find them after download. can i revive and reboot or fix my dead win7 os from linux. i can connect internet from wireless network in the neighborhood linksys!! what is linksys anyway? how to use linux ubuntu same way like windows? ie. insalling, using cd rom for installation and downloading and cleaning history and cache and system restore? please email me to: [email protected] any help..step by step many thanks

  Read the article

• I can't login to facebook from any browser

  - by user92974

  I'm Using UBUNTU 12.04. I'm having problems with Facebook. It really hard to login. Takes like 3 or 5 min. At first I thought it was a flash problem but then I realized it could be some proxy's conf file. Other sites doesn't have problems. Yesterday I tried Tor-browser-bundle and I installed privoxy using this rules http://www.neilvandyke.org/privoxy-rules/ . Today I removed privoxy and the conf file with the Ubuntu software center and ubuntu-tweak. I don't really find the problem and my windows pc does not have any problem with the same modem. I don't have an ISP'S PROXY it just a direct Internet connection using automatic DHCP. Maybe I am missing something else. But I want to be sure so, I'm asking. PD: Sorry for my English I'm Argentinian.

  Read the article

• How do I disable the upgrade to new version warning? [duplicate]

  - by Anatoliy

  This question already has an answer here: Disable Ubuntu Update Manager's new version warning 2 answers After I allowed Ubuntu on my notebook to upgrade to 13.4, it lost Wi-Fi connection. Network menu does not show wireless access points, but according to syslog it establishes connection. Also, the wireless router provides IP address to the host. I don't want to spend time on debugging and solving the problem that most probably will reappear with new update, so I decided to reinstall 12.10 version. It recognized Broadcom Wi-Fi modem right after the boot, and everything went great, until today I powered it on and suddenly found that it is running 13.4 and all my problems are back! Is it possible to instruct it to stay with 12.10 until I decide to upgrade?

  Read the article

• Using "MTNL 3G Jadoo" data card on Ubuntu

  - by amolbk

  I am trying to use "MTNL 3G Jadoo" data card (Teracom LW272) with Ubuntu 12.04. On connecting, it gets mounted as a drive containing the client installation .deb file. I opened the .deb file in Ubuntu Software Center and installed it. I searched for "MTNL" in Ubuntu search and found "MTNL 3G Modem" application. But it won't run. I found it is installed in /opt/MTNL-3GModem. I tried running it from the terminal as: sudo /opt/MTNL-3GModem/ModemClient, but no luck. Any idea how to get it working?

  Read the article

• Une beta 4 et un SDK pour iPhone OS 4 : de nouveaux wallpapers et une application "Maps" plus précis

  Mise à jour iPhone OS 4 bêta 4 et SDK Apple a mis en ligne hier soir une nouvelle bêta de l'iPhone OS 4 (bêta 4). Cette version devrait se rapprocher de la version finale qui doit être présentée lors de la WWDC qui aura lieu le 7 juin. Peu d'information sur cette mise à jour de la part d'Apple, mais certains développeurs annoncent déjà les quelques nouveautés :Le support du mode modem pour les clients de chez AT&T. De nouveaux wallpapers. Amélioration de l'application "Maps" qui serait plus précise. La création un dossier "Utilitaires" créer par défaut avec les applications "Horloges", "Calculatrices"...

  Read the article

• Wi-Fi not working only on Ubuntu computer?

  - by Joseph_carp

  The Wi-Fi at our house does not work on my Asus notebook running Ubuntu 12.04. It works fine on all other devices except this one. Internet worked fine before I had Ubuntu and I had Windows 7, but we also had a different ISP and place. My roommate's Windows 7 notebook and netbook both work fine with the internet and so do all of our phones and iPods. I do not know what is wrong because it works fine EVERYWHERE else, but when I am connected to my own router at my house it is either EXTREMELY slow or it just loads and loads and loads. I have all of the correct drivers and all that so why is it just this one connection that is a problem. I do not know if this matters but the ISP is Comcast and so is the Modem/wireless-router. Any help is much appreciated, thank you.

  Read the article

• Create a HotSpot which requires a username and password

  - by Trumbun

  I wish to set up a wireless access point which requires a username and password in order for clients to use the internet. The network setup will be internet modem connected to an Ubuntu Server (2 networks cards). The first network cards to get the internet to the server and the second network card to connect the the wifi hotspot. The server will host the software such as (Example software for windows) which will control the user connected by forcing them to login with the credentials given at the reception. Can some suggest some software that I can use? Thanks in advance

  Read the article

• Ubuntu does not recognize install files (easytether)

  - by Esbilick

  I am running Ubuntu 12.4 64amd. I cant get easy tether to install regardless of which version I use (32 or 64bit.) I keep getting an error when I try to run it in the command line. It tells me it not a valid deb file. If I click it on the desktop the instal manager comes up but the install button is not highlighted for me to click to install it that way. Please help. I'll be using my phone as internet modem

  Read the article

• Server 2008 RAID5 resynching

  - by benpage

  I built a W2K8 R2 server last weekend, and built a R5 array using Disk Management, 5x 1TB drives. For the next 60 hours the status said 'Resynching (X%)' as it built the array. during this time i did read and write to the drive (slowly) and once the rebuild was complete speeds were quite fast. I was copying over some data from a USB hard drive overnight, and the machine crashed (looking in the error i believe it was the driver for the usb drive) and so the RAID5 went back to resynching, since the machine was not shut down properly. The issue is, it's been about 48 hours since that started and I'm happy to say it will take roughly 60 hours again to resynch, however.. all this time in Disk Management, the status has only said 'Resynching', not 'Resynching (X%)'. The hard drive light is going nuts, and read/writes are slow again, so I'm assuming it is actually resynching. The question is - is that a correct assumption? and why is disk management not telling me what %age it's done? Is this normal behaviour for a not-properly-shut-down r5 array?

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• What registry key or windows file determines where monitors are placed in a multi monitor environmen

  - by dfree

  So I have a laptop with a usb to vga adapter (http://www.startech.com/item/USB2VGAE2-USB-VGA-External-Multi-Monitor-Video-Adapter.aspx) which allows me to add a third monitor to my laptop (the second monitor uses the onboard slot) It worked fine on windows vista - you could go into windows display settings and windows would recognize the third monitor and let you drag it around accordingly. With windows 7, the third monitor literally is not there in windows display settings. The driver allows you to display to the third monitor, but you can't move where it is. The display settings are misplaced relative to my other two (if you drag windows over to it, they end up on the bottom when it should be aligned). I called tech support and they said that there isn't a driver with this functionality for windows 7 yet. But here's my hunch. The monitor placement is still somewhat similar to where I had it on vista, it's just off about 500 pixels or so. I think there is either a registry key or driver file somewhere that is telling this monitor where to exist. If I could just modify the number and move it up 500 pixels, it would be in the right place and I don't have to wait 6 months for the company to come out with a new driver. Any ideas???

  Read the article

• Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

  - by BenA

  I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

  Read the article

• How to install an OS on a external hard drive

  - by Nrew

  I made a little research before coming here. And found out that I need to disconnect all internal hard drive before proceeding. http://www.pendrivelinux.com/installing-ubuntu-to-a-usb-hard-drive/ Here's my question: If I install Windows XP or Ubuntu on an external hard drive. Would it be universal? Can I use it or run it on any computer. Assuming that the bios allows you to boot from USB hard drive. Or even not because there's PLoP Bootmanager And has the considerable amount of memory and processor power to run the OS. What other things to consider when installing an OS in an external hard drive? Is installing in the external hard drive the same as when installing in an internal hard drive? Can I also boot multiple OS? What are the things to consider when doing this? And if you have a tutorial there. Showing how to install an OS in an external hard drive. Please link.

  Read the article

• Insufficient storage available to create shadow copy

  - by Bob.at.SBS

  I have used the "Windows 7 File Recovery" tool under Windows 8 to create system image backups to an external USB hard drive. I built a new Windows 8.1 machine, and I want to create my first system image backup of that machine to the same USB hard drive. The "Windows 7 File Recovery" tool is gone in Windows 8.1, but wbAdmin is alive and well: wbAdmin start backup -backupTarget:\\?\Volume{2a2b...994f} -allCritical -quiet fails with this text displayed: wbadmin 1.0 - Backup command-line tool (C) Copyright 2013 Microsoft Corporation. All rights reserved. Retrieving volume information... This will back up (EFI System Partition),(C:),Recovery (300.00 MB) to \?\Volume {2a2b1255-3a86-11e3-be86-b8ca3a83994f}. The backup operation to F: is starting. Creating a shadow copy of the volumes specified for backup... Summary of the backup operation: The backup operation stopped before completing. The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. The EFI System Partition is 100 MB The Recovery Partition is 300 MB The C partition is 1.72 TB, NTFS, 218 GB used, 1.51 TB free The destination drive is 1.81 TB, NTFS, 678 GB used, 1.15 TB free I've fiddled with vssadmin resize shadowstorage, with no change in the error. vssadmin list shadowstorage displays: Shadow Copy Storage association For volume: (C:)\?\Volume{37a0...263}\ Shadow Copy Storage volume: (C:)\?\Volume{37a0...263}\ Used Shadow Copy Storage space: 2.39 GB (0%) Allocated Shadow Copy Storage space: 2.81 GB (0%) Maximum Shadow Copy Storage space: 531 GB (30%) Shadow Copy Storage association For volume: (F:)\?\Volume{2a2...94f}\ Shadow Copy Storage volume: (F:)\?\Volume{2a2...94f}\ Used Shadow Copy Storage space: 334 GB (17%) Allocated Shadow Copy Storage space: 337 GB (18%) Maximum Shadow Copy Storage space: UNBOUNDED (922154758%) (Yeah, the "percent calculation" for UNBOUNDED is seriously bogus.) I've run SFC /verifyonly and it seems happy. I've verified that the new `Volume Shadow Copy" service starts when I start the backup operation. Any suggestions?

  Read the article

• Problem recreating BCD on Windows 7 64bit - The requested system device cannot be found

  - by Domchi

  NVIDIA drivers upgrade crashed my Windows 7 installation, so I'm working to undo the damage. What I can do: I can boot Windows install from the USB drive, and I can boot the Hiren's Boot CD. Although automated Windows repair fails, I can get to command prompt when I boot Windows install from USB drive, and I can see my drive and all my data. What I cannot do: I cannot boot into Windows - I get this message: Windows failed to start. A recent hardwware or software change might be the cause. To fix the problem: 1.insert windos cd and run a repair your computer option. File: /boot/bcd Status: 0xc000000f Info: an error occured while attempting to read the boot configuration data. It seems that something is wrong with my /Boot/BCD, so I'm trying to recreate it from scratch. I've tried all the methods detailed here (including Windows repair which fails), and I'm left with the last one (near the bottom of that page). When I type the following command as in the tutorial: bcdedit.exe /import c:\boot\bcd.temp ...it fails with the following error: The store import operation has failed. The requested system device cannot be found. Many Google results say that I must use diskpart to set my partition active, however it's already set as active. Also, when I try this: bcdedit /enum It fails with similar message: The boot configuration data store could not be opened. The requested system device cannot be found. Does anyone know what does that error message mean, and what is the requested system device? I'd like to avoid having to reinstall Windows since all the files on disk seem to be fine.

  Read the article

• How to get the permissions right for /dev/raw1394

  - by Mark0978

  I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >