Search Results

Search found 5693 results on 228 pages for 'ago'.

Page 166/228 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Control copy/paste doesn't work

  - by Guest

  I have a laptop HP PAVILION dv6-3126er with Windows 7 Home Edition installed and neither control copy nor control paste doesn't work (i've tried: ctrl+c, ctrl+v, shift+c, shift+v, ctrl + insert, shift + insert). I've tried to run a system check through cmd with sfc /scannow, it repaired something, i restarted but it didn't solve the problem. I've also tried many key combinations (like alt+ctrl+fn), but nothing works in any program. In Microsoft Word 2003 in the menu i have no key combination for copy/paste near them (in my previous comp they've been there - in brackets). Shift+Delete works by the way. I brought this laptop a few weeks ago, and i discovered this problem in the first days. I have no viruses because i have had no time to even connect him to internet. Anyways, i checked it for viruses - it is clean. I don't want to do system restore, because i see no reason to do it for a pretty clean system. I hope it is not a problem with the laptop itself. Maybe there is another reason? Maybe i need to do some more system checks? Any suggestions? Thanks in advance.

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• Virus on site but can't find where

  - by Rob

  WARNING! THIS IS ABOUT A VIRUS ON MY SITE. IT APPEARS IT HAS BEEN THERE FOR SOMETIME AND I'VE HAD NO PROBLEMS. BUT PLEASE BE CAREFUL. READ EVERYTHING I SAY AND SEE IF YOU CAN HELP ME WITHOUT VISITING THE LINK. AVG PICKS UP ON IT AND BLOCKS IT, MCAFEE DOES NOT. Sorry about the warning, obviously i'm not here to get anyone infected or anything like that. Basically I run the website sortitoutsi dot net. Ages ago I got a virus on my computer, they got hold of my FTP passwords and added some lines of javascript to the top of my site. I removed them and believe it was fixed. However i'm using the "Web Developer" extension for Firefox and chose to view all javascript on my page and find there are various links to horrible urls such as: gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/aboutus.org/aboutus.org/google.com/skycn.com/torrents.ru.php and gittigidiyor-com.excite.co.jp.webmasterworld-com.eastmusicdirect.ru:8080/index.php?jl= These terms do not appear anywhere. In the source code, in any of the javascript or the css. I also can't see that there are any rogue images that I don't recognise either. So i've no idea where this javascript is coming from. Can anyone suggest how I can find references to these links and remove them? I can see them both in the Web Developer firefox extension and in the net tab using Firebug. Any help would be greatly appreciated

  Read the article

• DRBD Replication failure

  - by user62513

  A couple of weeks ago I setup a 2 nodes CRM system with one of the resources managed being MySQL over DRBD. Today for maintenance reasons I restarted both nodes but now they can't connect to each other anymore. DRBD fell out of sync and I followed this guide to get it back connected but it's only able to run successfully on one node. But this strange thing happens: If I crm node standby both nodes and I try: crm node online node0 before crm node online node1, all the CRM resources start successfully but the DRBD partitions are still running in StandAlone state. crm node online node1 beofre crm node online node0, the DRBD resource fails to start, thus causing mysql not to start. If I standby both resources and call crm node online node0 then it times out and prints this error: Running crm node online node0 produces this output after timing out Error setting standby=off (section=nodes, set=<null>): Remote node did not respond Error performing operation: Remote node did not respond Is there anything I'm doing wrong here? An alternative will be just do MySQL replication but I'm not sure how to promote a slave to master when the master database is not available.

  Read the article

• Weird File Corruption

  - by Viet Norm

  My Windows 8 broke few days ago and I had to reinstall it (see Can't boot Windows 8). Afterwards, I found some corrupt files on C drive. Ok, it happens, but this is really weird. Corrupt files seem to contain stuff from Windows registry. For example, this is beginning of one of the corrupt files: hbin ` PÿÿÿT h i s z o n e c o n t a i n s w e b s i t e s t h a t y o u t r u s t n o t t o d a m a g e y o u r c o m p u t e r o r y o u r f i l e s ... I googled and found that 'hbin' often refers to "hive bin" of Windows registry. Then I searched the registry for the readable part of corrupt data, and found the text in some registry value (not the text above, but something I found in another corrupt file. I'm assuming the above is also from registry). My question is, how could this happen? Was it a virus, or did Windows somehow corrupt these files while attempting to repair itself?

  Read the article

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

  Read the article

• Vista Screen resolution Changes when Switching Users

  - by Benjol

  I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Reconnecting OST with Exchange

  - by syrenity

  Hi. I have a quite big problem with customer's MS Exchange. The server got it's disk filled about 2 weeks ago, so it's currently offline. They plan to upgrade it, but not in hurry, as they use it mainly for OWA and back-up - the mails exchange is done via SMTP and POP3. Trying to diagnose some problem today, one of the users has (following the ISP instructions), removed the Exchange account from Outlook, which essentially left the OST orphaned. The user naturally didn't move the emails or any other data to the Archive / PST before, so these emails located on the OST only. So currently I'm trying to figure out how to restore them. There are 2 options: 1) Make the user buy some tool to convert them to PST, and import as archive / main Outlok file? 2) Reconnect the Outlook to Exchange (once it up), let it sync the old server content, then shutdown Outlook and replace the new OST with the old one, start Outlook again in offline mode and move these files to archive. 3) Any other method? Can someone advice what would be the best approach here? The used versions are Outlook 2007 and Exchange 2003. Thanks!

  Read the article

• CentOS vps is randomly rebooting

  - by develroot

  I have a centos vps (Parallels Virtuozzo container) which has been running for months. However, a few days ago it started to randomly reboot itself, and i can't find out why. And the biggest problem that i don't understand is that it takes 40 minutes to reboot (as far as i can see in the logs) root ~ # cat /var/log/messages | grep shutdown Oct 11 13:52:11 vps27 shutdown[23968]: shutting down for system halt Oct 14 14:55:17 vps27 shutdown[30662]: shutting down for system halt Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt And notice the time difference between shutdown and xinetd's start: Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt Oct 15 06:21:24 vps27 init: Switching to runlevel: 0 Oct 15 06:21:27 vps27 saslauthd[30614]: server_exit : master exited: 30614 Oct 15 06:21:38 vps27 named[30661]: shutting down Oct 15 06:21:47 vps27 exiting on signal 15 Oct 15 07:04:34 vps27 syslogd 1.4.1: restart. Oct 15 07:05:06 vps27 xinetd[1471]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Oct 15 07:05:06 vps27 xinetd[1471]: Started working: 0 available services And here's what Parallels Power Panel says in terms of Status Changes: Time Old Status Status Obtained Oct 15, 2011 06:23:46 AM Mounted Down Oct 15, 2011 06:22:31 AM Running Mounted Oct 14, 2011 03:06:48 PM Starting Running Oct 14, 2011 03:06:23 PM Down Starting Oct 14, 2011 03:06:08 PM Mounted Down Oct 14, 2011 02:58:24 PM Running Mounted For some reason it's getting into Mounting mode and then restarts itself. The only problem that i can imagine is disk space utilization, which is now 84%. But can that be a reson for system halt? Time Category Details Type Parameter Oct 15, 2011 07:08:33 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:27:23 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:23:50 AM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used Oct 14, 2011 03:06:24 PM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 83 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 14, 2011 03:05:50 PM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used

  Read the article

• Login error in phpMyAdmin, problem setting auth_type in config.inc.php

  - by sergiom

  I'm having a problem accessing phpMyAdmin. A few weeks ago I did succeed configuring it for auth_type = 'cookie', but I still receive an error stating that I should have to set blowfish_secret. That was strange because it was set. So I changed auth_type from cookie to http, but it didn't work. I changed it back to cookie, but it doesn't work anymore. this is the error. phpMyAdmin - Error Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. this is my C:\wamp\apps\phpmyadmin3.2.0.1\config.inc.php <?php /* Servers configuration */ $i = 0; /* Server: localhost [1] */ $i++; $cfg['Servers'][$i]['verbose'] = 'localhost'; $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['port'] = ''; $cfg['Servers'][$i]['socket'] = ''; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['auth_type'] = 'cookie'; $cfg['Servers'][$i]['user'] = ''; $cfg['Servers'][$i]['password'] = ''; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['Servers'][$i]['blowfish_secret'] = 'this is my passphrase'; /* End of servers configuration */ $cfg['DefaultLang'] = 'en-utf-8'; $cfg['ServerDefault'] = 1; $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; ?> I changed the blowfish_secret, since I don't remember the old one, and I deleted the cookies in my browser and restartd all wamp services and the browser. After I enter username and password in the login page I get the error. I've tried searching into the log files, but I'm a newbie and I'm not sure I've searched the right ones. I'm using Wamp server 2.0 that has Apache Version : 2.2.11 PHP Version : 5.3.0 MySQL Version : 5.1.36 phpmyadmin : 3.2.0.1

  Read the article

• Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

  - by Boden

  I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

  Read the article

• What is the best way to recover from a mysql replication fail?

  - by Itai Ganot

  Today, the replication between our master mysql db server and the two replication servers dropped. I have a procedure here which was written a long time ago and i'm not sure it's the fastest method to recover for this issue. I'd like to share with you the procedure and I'd appreciate if you could give your thoughts about it and maybe even tell me how it can be done quicker. At the master: RESET MASTER; FLUSH TABLES WITH READ LOCK; SHOW MASTER STATUS; And copy the values of the result of the last command somewhere. Wihtout closing the connection to the client (because it would release the read lock) issue the command to get a dump of the master: mysqldump mysq Now you can release the lock, even if the dump hasn't end. To do it perform the following command in the mysql client: UNLOCK TABLES; Now copy the dump file to the slave using scp or your preferred tool. At the slave: Open a connection to mysql and type: STOP SLAVE; Load master's data dump with this console command: mysql -uroot -p < mysqldump.sql Sync slave and master logs: RESET SLAVE; CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; Where the values of the above fields are the ones you copied before. Finally type START SLAVE; And to check that everything is working again, if you type SHOW SLAVE STATUS; you should see: Slave_IO_Running: Yes Slave_SQL_Running: Yes That's it! At the moment i'm in the stage of copying the db from the master to the other two replication servers and it takes more than 6 hours to that point, isn't it too slow? The servers are connected through a 1gb switch.

  Read the article

• Add single sign-on into existing web app

  - by EvilDr

  Apologies if this isn't the best site, I've search for an answer but can't find anything quite right. I don't actually now the correct terminology I should be using here, so any pointers will be appreciated. I have a web application that accessed by many different users across different organisations. Access is provided by each user having a unique username/password which is stored in SQL (database fields are customerID, userID, username). Some organisations are now asking if we can change this to allow "Active Directory single sign-on" so that users don't need to remember yet another set of login details. From research I can see how this is achieved using OpenAuth and Google (etc), but I know hardly anything about AD and can't find much information on this (again I'm sure it helps when you know the terminology). Is this request even possible to achieve, given that most users will be from different (and unrelated) organisations? I saw on a Microsoft Build video not long ago that there is some kind of replication service for AD to allow Cloud authentication. Is this what I should be aiming for?

  Read the article

• Archive Manager, SQL 2005 and MaxTokenSize high CPU

  - by Tim Alexander

  So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

  Read the article

• How do I find my missing songs from last.fm?

  - by duality_

  My disk failed with all my music with it, lots of them. But luckily, I scrobbled every song to last.fm. I am looking for a way to scan my disk for my songs and check last.fm and tell me which songs are missing from my disk that are present on last.fm. So to recap: I would need to log into my last.fm account and compile a list of all the songs I have scrobbled and then scan my computer for missing songs. Is there a program or script that does this? I don't mind it being a shell script even. Edit: I know this is possible because I came close to this a little time ago. I created a PHP script (web page) that got all my songs through Last.fm API and then went through my files on disk and read their id3 tag. I got very close: the program showed missing songs, but there were many small issues (id3 reading was buggy, tags had different data, etc.) that required more programming time that I didn't have.

  Read the article

• How to use Cisco AnyConnect VPN Client?

  - by ktm5124

  I wrote a related question earlier, which is still unresolved. This question is much more specific. So I installed Cisco AnyConnect VPN Client on Snow Leopard. I connect to my work VPN. Once connected, I can't ping my work machine. I don't see any computers on the network. If the client were not running, I wouldn't believe myself to be connected to the VPN. Is there something that I am doing wrong? Do I have to route my network traffic through the tunnel manually? (ifconfig route comes to mind) Is the POST request that I am about to submit going to go through the tunnel created by my VPN? I guess the main question is: why do I feel so in the dark? Cisco says I am connected to my VPN, but for all I know it is invisible. N.B. I do have the up-to-date Cisco VPN Client: version 2.3.2016. I installed it about a week ago.

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Is Cherokee (probably) the best static content server for beginner sysadmins?

  - by Bad Learner

  I have read the pros and cons of most of the popular web servers and have come to a conclusion that Apache would (probably) be the best web server for serving dynamic content - - no wonder YouTube, Flickr and Facbook, among many others, use it. I do not know if that C10K problem applies to Apache even when serving dynamic content only, but I think any web server used to serve dynamic content needs some good tweaking for optimized performance, and the fact that nothing beats Apache when it comes to documentation, resources and support on the web, I think should will go with Apache for dynamic content. That apart, the confusion begins when it comes to choosing web servers for static content (including streaming videos). I see that Nginx, Cherokee and Lighttpd are among the best (I am not considering non-open source or non-linux stuff here). So, which too choose? I know one cannot go wrong with any of the three (Nginx, Cherokee, Lighttpd). Lighttpd's development has evidently gotten slower than it was a good time ago. The documentation is pretty good for all the three, and hopefully, so are the resources (knowledge of these among the users of Stackoverflow/Serverfault sites, the web etc). Precisely, and noting point [2] and [3], if I am not wrong, I should either go with Nginx or Cherokee. I would love to see someone clarify these... is Cherokee just as fast (mb/s), performant (connections/s), and reliable (think downtime/restarting server) as Nginx for serving static content and load balancing, for small, medium to large (and really large) websites and applications? (Think, the size of YouTube, Apache or Facebook.) if the answer for the Q above is a big "hell, yes!" then, I should probably prefer Cherokee, right? Because, since I am a beginner, it would a lot easier to setup Cherokee as it has a graphical admin user interface + really good documentation. Yes? I could be wrong, I could be right. I put down what I know so that you can offer most relevant advise. Pardon if anything I've said is offensive.

  Read the article

• Visual Studio 2010 won't compile/create new projects

  - by tuner

  My Visual Studio 2010 Professional with SP1 installed won't compile anymore. The shown error is: TRACKER : error TRK0005: Failed to locate: "CL.exe". The system cannot find the file specified. Strangely it is also not possible anymore to create new projects - the wizard appears but just restarts when I press create. As I found out the paths for Visual Studio are now built from settings in the registry. Namely HKEY_CURRENT_USER\Software\Microsoft\VisualStudio. Comparing a colleagues installation with mine revealed no different settings. So this is how the Property Pages/Configuration Properties/VC++ Directories look like: Executable Directories: $(ExecutablePath) Include Directories: $(IncludePath) Reference Directories: $(ReferencePath) Library Directories: $(LibraryPath) Source Directories: $(SourcePath) Exclude Directories: $(ExcludePath) From the Visual Studio 2010 Command Prompt, cl.exe is found. I can only guess that this behavior was caused by a reinstallation of Studio a couple of months ago (to a different folder). As we use an external build-script for our main project there is a good chance that it is broken since then. Any hints?

  Read the article

• Oracle: Getting ORA-01195 and ORA-01110 when attempting resetlogs

  - by MacAnthony

  I am trying to get our database to startup. When I login to sqlplus and do a startup, I get the message: Total System Global Area 534462464 bytes Fixed Size 2215064 bytes Variable Size 331350888 bytes Database Buffers 192937984 bytes Redo Buffers 7958528 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open So I do a shutdown, startup mount (which works fine) and then run: SQL> alter database recover using backup controlfile until cancel; alter database recover using backup controlfile until cancel * ERROR at line 1: ORA-00283: recovery session canceled due to errors ORA-19909: datafile 1 belongs to an orphan incarnation ORA-01110: data file 1: '/<path>/system01.dbf' SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01195: online backup of file 1 needs more recovery to be consistent ORA-01110: data file 1: '/<path>/system01.dbf' I know I've used instructions to get me past this error before, but I seem to be having trouble tracking it down. A bit of history: We wanted to refresh the data in this from another db so we attempted to do a expdb/impdb into this instance. The impdb did not complete correctly and got an end of file error message in it and hung (I still have the message in a log if it's important). Since the instance would start at this point, we decided to use the hotbackup process we have to restore the db. The hotbackups are from another server/instance. We went through the same process 2 weeks ago. At the point of recreating the control file is where we got to the issue above.

  Read the article

• checksecurity / setuid changes, is this a bug or did somebody break in?

  - by Fabian Zeindl

  I received a mail by checksecurity from my ubuntu 12.04 server with the following content: --- setuid.today 2012-06-03 06:48:09.892436281 +0200 +++ /var/log/setuid/setuid.new.tmp 2012-06-17 06:47:51.376597730 +0200 @@ -30,2 +30,2 @@ - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudo - 131904 4755 2 root root 71280 Wed May 16 07:23:08.0000000000 2012 ./usr/bin/sudoedit + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudo + 143967 4755 2 root root 71288 Fri Jun 1 05:53:44.0000000000 2012 ./usr/bin/sudoedit @@ -42 +42 @@ - 130507 666 1 root root 0 Sat Jun 2 18:04:57.0752979385 2012 ./var/spool/postfix/dev/urandom + 130507 666 1 root root 0 Mon Jun 11 08:47:16.0919802556 2012 ./var/spool/postfix/dev/urandom First i was worried, then i realized that the change was actually 2 weeks ago, i think there was a sudo-update back then. Since checksecurity runs in /etc/cron.daily i wondered why i only get that email now. I looked into /var/log/setuid/ and found the following files: total 32 -rw-r----- 1 root adm 816 Jun 17 06:47 setuid.changes -rw-r----- 1 root adm 228 Jun 3 06:48 setuid.changes.1.gz -rw-r----- 1 root adm 328 May 27 06:47 setuid.changes.2.gz -rw-r----- 1 root root 1248 May 20 06:47 setuid.changes.3.gz -rw-r----- 1 root adm 4473 Jun 17 06:47 setuid.today -rw-r----- 1 root adm 4473 Jun 3 06:48 setuid.yesterday The obvious thing that confuses me is that the file setuid.yesterday is not from yesterday = Jun/16. Is this a bug?

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >