Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 166/194 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Adjust output Brightness/Gamma/Colors in Gnome

  - by Mikee

  We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

  Read the article

• IP routing Solaris 9 access the internet from local network

  - by help_me

  I am trying to configure the NICS on the Solaris Sparc server. My problem lies in getting out to the "Internet" from the local network. I have requested the NIC to receive a DHCP server address #ifconfig -interface dhcp start. If anyone could guide me as to what I need to do next. I am not able to ping 4.2.2.2 or access the internet. Much appreciated, thank you #uname -a SunOS dev 5.9 Generic_122300-59 sun4u sparc SUNW,Sun-Fire-V210 ifconfig -a lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.3 netmask ffffc000 broadcast 10.100.63.255 bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.100.0.22 netmask ffffc000 broadcast 10.100.63.255 bge3: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 12 inet 169.14.60.37 netmask fffffe00 broadcast 169.14.61.255 cat /etc/defaultrouter 10.100.0.254 169.14.60.1 cat /etc/resolv.conf nameserver 169.14.96.73 nameserver 169.10.8.4 netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 169.14.60.37 169.14.60.1 UGH 1 0 169.14.60.0 169.14.60.37 U 1 18 bge3 10.100.0.0 10.100.0.3 U 1 34940 bge0 10.100.0.0 10.100.0.22 U 1 0 bge0:2 224.0.0.0 10.100.0.3 U 1 0 bge0 default 10.100.0.254 UG 1 111 default 169.14.60.1 UG 1 26 127.0.0.1 127.0.0.1 UH 10 59464 lo0 bash-2.05$ sudo ndd -get /dev/ip bge0:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip bge3:ip_forwarding 1 bash-2.05$ sudo ndd -get /dev/ip ip_forwarding 1

  Read the article

• Synergy: Cannot send media keys from Linux to Mac

  - by CraftyThumber

  I have a Linux Synergy server (Si-Linux) serving just one Mac client (Macbook Pro UK) (SiBook-Pro.local). On my Linux server I am using a USB Apple keyboard with the exact layout of the laptops keyboard (the compact UK aluminium keyboard). I would like to send the media keys to the Mac client at all times and I have attempted the following in my synergy.conf: keystroke(AudioPlay) = keystroke(AudioPlay,SiBook-Pro.local) This did not seem to work so I ran both the server and client as foreground processes and with debugging enabled and observed the following: Server Log: DEBUG1: activate actions DEBUG1: hotkey: keyDown(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyDown id=57523 mask=0x0000 button=0x0000 DEBUG1: send key down to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 DEBUG1: deactivate actions DEBUG1: hotkey: keyUp(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyUp id=57523 mask=0x0000 button=0x0000 DEBUG1: send key up to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 Client Log: DEBUG1: recv key down id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: mapKey e0b3 (57523) with mask 0000, start state: 0000 DEBUG1: key e0b3 is not on keyboard DEBUG1: recv key up id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: recv enter, 1279,386 5 2000 As you can see, the client claims the key received is not on keyboard. I don't understand since it is the same key as is on the Macbook's keyboard. I tried to reverse the client-server config to see if I could capture the key being sent if I pressed the Play button on the Macbook but the key doesn't seem to even make it to Synergy. Almost all keyboard presses get logged but the media keys seem to bypass the logs and just execute their function locally. E.g. I press play on the Macbook (with the Macbook as the server) and the key plays music on the Macbook and the key is not logged to the debug log.

  Read the article

• How to effectively have less php-cgi processes running?

  - by João Pinto Jerónimo

  My server is a Linode 512, and on it I run a Wordpress MU with 3 websites (they don't get a lot of visitors) and a couple of NodeJS apps. I need to switch to Lighttpd because Apache 2 was using about 59% of the server's RAM, and now I have the php-cgi processes taking up about 43.6% of the server's RAM: most often 2 processes use 16.5% of the RAM each, 4 processes use 1.8% of the RAM each, and 4 more processes use 0,8% of the RAM, each How can I have less of these processes ? I'm almost sure they're not all needed for the trafic this server gets... I tried only allowing 2 children, but I still have those 10... This is my fastcgi.server section in lighttpd.conf. fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/var/run/lighttpd/php-fastcgi.socket", "bin-path" => "/usr/bin/php-cgi", "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "4000" ) ) ) ) What else can I do to tune lighttpd to use less RAM ?

  Read the article

• Upstart Script on Centos 6

  - by MarcusMaximus

  I'm trying to create an upstart script to run a python script on startup. In theory it looks simple enough but I just can't seem to get it to work. I'm using a skeleton script I found here and altered. description "Used to start python script as a service" author "Me <[email protected]>" # Stanzas # # Stanzas control when and how a process is started and stopped # See a list of stanzas here: http://upstart.ubuntu.com/wiki/Stanzas#respawn # When to start the service start on runlevel [2345] # When to stop the service stop on runlevel [016] # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background expect fork # Start the process script exec su nonrootuser -c "python /usr/local/scripts/script.py" end script The test script I want it to run is currently a simple python script that runs without any issue when run from a terminal. #!/usr/bin/python2 import os, sys, time if __name__ == "__main__": for i in range (10000): message = "shotgunUpstartTest " , i , time.asctime() , " - Username: " , os.getenv("USERNAME") #print message time.sleep(60) out = open("/var/log/scripts/scriptlogfile", "a") print >> out, message out.close() The location/var/log/scripts has permissions 777 The file /usr/local/scripts/script.py has permissions 775 The upstart script /etc/init.d/pythonupstart.conf has permissions 755

  Read the article

• Can't get DNS Alias work on Ubuntu 10.04 with Apache 2

  - by Johnny

  I want to use the DNS Alias to configure one of my domain pointing to a specific directory on the server. Here is what I've done: Change the IP address in domain setting, and it works $ ping www.example.com PING example.com (124.205.62.xxx): 56 data bytes 64 bytes from 124.205.62.xxx: icmp_seq=0 ttl=48 time=53.088 ms 64 bytes from 124.205.62.xxx: icmp_seq=1 ttl=48 time=52.125 ms ^C --- example.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 52.125/52.606/53.088/0.482 ms Add sites-available and sites-enabled $ ls -l /etc/apache2/sites-available/ total 16 -rw-r--r-- 1 root root 948 2010-04-14 03:27 default -rw-r--r-- 1 root root 7467 2010-04-14 03:27 default-ssl -rw-r--r-- 1 root root 365 2010-06-09 18:27 example.com $ ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 26 2010-06-09 15:46 000-default -> ../sites-available/default lrwxrwxrwx 1 root root 33 2010-06-09 18:17 001-example.com -> ../sites-available/example.com But it doesn't work and when I open the browser for www.example.com, it shows an 111 error: The following error was encountered: Connection to 124.205.62.48 Failed The system returned: (111) Connection refused Here is how example.com's config: $ cat /etc/apache2/sites-enabled/001-example.com <virtualhost *:80> DocumentRoot "/vhosts/example.com/htdocs/" ServerName www.example.com ServerAlias example.com <Location /> Order Deny,Allow Deny from None Allow from all </Location> #Include /etc/phpmyadmin/apache.conf ErrorLog /vhosts/example.com/logs/error.log CustomLog /vhosts/example.com/logs/access.log combined Could you please tell me how to solve this?

  Read the article

• MySQL Not Turning On

  - by Shalin Shah

  I have an amazon ec2 instance running on the Amazon Linux AMI and its a micro instance. I wanted to install Django onto my server so I entered these commands wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/go wget http://www.mlsite.net/blog/wp-content/uploads/2008/11/django.conf chmod 744 go ./go So after I was done, I ran sudo service httpd restart and sudo service mysqld restart and This is what came up for mysqld: Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] So I deleted the django files /usr/local/python2.6.8/site-packages/django_registration.egg and I tried finding the error and I found out that in my /etc/my.cnf for the socket, it said socket=/var/lock/subsys/mysql.sock so I went to /var/lock/subsys/ and there was no mysql.sock. I tried creating one using vim but it still didn't work. Then I checked the error log and it said Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) So I am pretty much lost right now. I know it has something to do with mysql.sock If you might know a reason why this was caused could you please let me know? I have a wordpress site on my server, so i kind of need MySQL to work. Thanks!

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

• Conditionally set an Apache environment variable

  - by Tom McCarthy

  I would like to conditionally set the value of an Apache2 environment variable and assign a default value if one of the conditions is not met. This example if a simplification of what I'm trying to do but, in effect, if the subdomain portion of the host name is hr, finance or marketing I want to set an environment var named REQUEST_TYPE to 2, 3 or 4 respectively. Otherwise it should be 1. I tried the following configuration in httpd.conf: <VirtualHost *:80> ServerName foo.com ServerAlias *.foo.com DocumentRoot /var/www/html SetEnv REQUEST_TYPE 1 SetEnvIfNoCase Host ^hr\. REQUEST_TYPE=2 SetEnvIfNoCase Host ^finance\. REQUEST_TYPE=3 SetEnvIfNoCase Host ^marketing\. REQUEST_TYPE=4 </VirtualHost> However, the variable is always assigned a value of 1. The only way I have so far been able get it to work is to replace: SetEnv REQUEST_TYPE 1 with a regular expression containing a negative lookahead: SetEnvIfNoCase Host ^(?!hr.|finance.|marketing.) REQUEST_TYPE=1 Is there a better way to assign the default value of 1? As I add more subdomain conditions the regular expression could get ugly. Also, if I want to allow another request attribute to affect the REQUEST_TYPE (e.g. if Remote_Addr = 192.168.1.[100-150] then REQUEST_TYPE = 5) then my current method of assigning a default value (i.e. using the regular expression with a negative lookahead) probaby won't work.

  Read the article

• Samba share will not connect (was working yesterday)

  - by David Gard

  I have a CentOS websver with a Samba share set up (\\webserver\websites). I was connected to this share just yesterday without issue, but today my Windows 8 PC will not connect to it. I've also tried making a connection from Windows 7 and Windows XP, all without success. I initially tried restarting my computer, but that did not work. I then tried restarting the Samba service on the webserver (service smb restart), and when that failed I restarted the webserver. All of that was to no avail, and I still cannot connect to the share. The webserver is contactable from my PC (and the others I tried), as the websites it hosts work fine and I'm able to Putty to the server. When connected to the webserver, I can see that Samba is running by using service smb status - service smb status smbd (pid 4685) is running... nmbd (pid 4688) is running... Can anyone please help me to get this share working? Here is my full Samba config (/etc/samba/smb.conf) - [global] workgroup = MYGROUP server string = Samba Server %v log file = /var/log/samba/log.%m max log size = 50 security = user encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 local master = no [websites] comment = Websites browseable = yes writable = yes path=/var/www/html/ valid users = dgard

  Read the article

• Using Samba to share a folder from a Linux guest with a Windows host in VirtualBox

  - by AmV

  I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and I need more information on how to proceed. So far, I managed to set up two network adapters (one NAT and one host-only) and install Samba on the Linux guest, but now I have the following questions: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that need to be executed on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this? Thanks!

  Read the article

• DNSSEC - First Signature

  - by Arancha

  I'm testing DNSSEC with Bind 9.7.2-P2. I have a question regarding the first signature created over a zone that already exists. I'm using dynamic DNS. I create the first two keys: one KSK and one ZSK. According to https://datatracker.ietf.org/doc/draft-ietf-dnsop-dnssec-key-timing/, the first ZSK needs to be published for an interval equal to Ipub, before it can be active. I create the ZSK with a Publication date previous to its Activation date. I restart the service and I can see that the key is published at Publication date, but it's no active later, when Activation date arrives. This is the configuration of the zone dnssec.es at the named.conf file: zone "dnssec.es" { auto-dnssec maintain; update-policy local; sig-validity-interval 1; key-directory "dnssec/keys_dnssec"; type master; file "dnssec/db.dnssec.es"; }; Any clue?? Regards

  Read the article

• Play framework 2.2 using Upstart 1.5 (Ubuntu 12.04)

  - by Leon Radley

  I'm trying to get Play 2.2 working with upstart. I've been running Play 2.x with upstart since it's release and it's never been a problem. But since the release of 2.2 and the change to http://www.scala-sbt.org/sbt-native-packager/ play doesn't want to start any more. Here's the config I'm using description "PlayFramework 2.2" version "2.2" env APP=myapp env USER=myuser env GROUP=www-data env HOME=/home/myuser/app env PORT=9000 env ADDRESS=127.0.0.1 env CONFIG=production.conf env JAVAOPTS="-J-Xms128M -J-Xmx512m -J-server" start on runlevel [2345] stop on runlevel [06] respawn respawn limit 10 5 expect daemon # If you want the upstart script to build play with sbt pre-start script chdir $HOME sbt clean compile stage -mem $SBTMEM end script exec start-stop-daemon --pidfile ${HOME}/RUNNING_PID --chuid $USER:$GROUP --exec ${HOME}/bin/${APP} --background --start -- -Dconfig.resource=$CONFIG -Dhttp.address=$ADDRESS -Dhttp.port=$PORT $JAVAOPTS I've changed the JAVAOPTS to include the -J- and I've also changed the path to use the new startscript located in the /bin/ dir. I've read that upstart 1.4 has setuid and setguid. I've tried removing the start-stop-daemon but I haven't got that working either. Any suggestions would be appreciated.

  Read the article

• Building PHP For MacOS

  - by Eray

  I was using XAMPP and decided to uninstall it and use MacOS' in-built apache and php modules. But while uninstalling XAMPP I deleted /usr/bin/php files and other PHP-CLI files accidentally. And I decided to install newest version of PHP (5.5.12) instead of rebuilding current version (5.4.24). Downloaded it and unzip. After this executed this command as mentioned at this guide. ./configure '--with-apxs2=/usr/sbin/apxs' '--enable-cli' '--with-config-file-path=/etc' '--with-zlib=/usr' '--enable-bcmath' '--with-bz2=/usr' '--enable-calendar' '--disable-cgi' '--with-curl=/usr' '--enable-dba' '--enable-ndbm=/usr' '--enable-exif' '--enable-fpm' '--enable-ftp' '--with-gd' '--enable-gd-native-ttf' '--enable-mbregex' '--with-mysql=mysqlnd' '--with-mysqli=mysqlnd' '--with-pear' '--with-pdo-mysql=mysqlnd' '--with-mysql-sock=/var/mysql/mysql.sock' '--with-tidy' '--enable-wddx' '--with-xmlrpc' '--enable-zip' make make install When i check phpinfo() , it's still version 5.4.24 . This line from my httpd.conf LoadModule php5_module libexec/apache2/libphp5.so /usr/libexec/apache2/libphp5.so coming from old version and i couldn't ind libphp5.so for new version. There is no libphp5.so file inside modules dir. How can i use new PHP build with Apache ? UPDATE Results of php -v command . PHP 5.5.12 (cli) (built: May 27 2014 05:17:21) Copyright (c) 1997-2014 The PHP GroupZend Engine v2.5.0, Copyright (c) 1998-2014 Zend Technologies

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• netkit: why cant my router 4 pc4 ping my router 1 pc1 - how can I solve this please?

  - by donok

  Below I have four routers connected but my pc1 on r1 cannot ping my pc4 on r4 and also my pc2 on r2 cant ping my pc4 on r4 and vice versa. Below is a network diagram: and the configurations are below that, could anyone help me please on making them accessible? ![connecting 4 routers][1] I cant post my diagram on serverfault(less than 10 rep) so I did on stackoverflow and asked the same question. pc1: ifconfig eth0 195.11.14.5 netmask 255.255.255.0 broadcast 195.11.14.255 up route add default gw 195.11.14.1 dev eth0 pc2.start: ifconfig eth0 200.1.1.7 netmask 255.255.255.0 broadcast 200.1.1.255 up route add default gw 200.1.1.1 dev eth0 pc3: ifconfig eth0 195.20.14.9 netmask 255.255.255.0 broadcast 195.20.1.255 up route add default gw 195.20.14.1 dev eth0 pc4: ifconfig eth0 200.2.1.11 netmask 255.255.255.0 broadcast 200.2.1.255 up route add default gw 200.2.1.1 dev eth0 r1: ifconfig eth0 195.11.14.1 netmask 255.255.255.0 broadcast 195.11.14.255 up ifconfig eth1 100.0.0.9 netmask 255.255.255.252 broadcast 100.0.0.11 up route add -net 200.1.1.0 netmask 255.255.255.0 gw 100.0.0.10 dev eth1 route add default gw 100.0.0.10 lab.conf: if you need more on that Ill post it up but I think most of the info is there. Any help would be greatly appreciated especially trying to make a connection between pc4 and pc1, even if you think it does not make sense please explain why. Thank you.

  Read the article

• Postgres pgpass windows - not working

  - by Scott

  DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

  Read the article

• IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

  - by Daniel

  I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

  Read the article

• ping: unknown host google.com

  - by Tar

  Relevant output: /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 servers_ip_address server.2006scape.com server /etc/resolv.conf search 2006scape.com #Generated by NetworkManager nameserver 8.8.8.8 nameserver 8.8.4.4 Some stuff from tcpdump 07:46:28.795843 IP server_ip.42841 > 8.8.4.4.domain: 60253+ PTR? 87.127.104.87.in-addr.arpa. (44) 07:46:28.795980 IP server_ip.54001 > 8.8.4.4.domain: 7390+ PTR? 60.187.80.98.in-addr.arpa. (43) 07:46:28.804029 IP server_ip.59667 > 8.8.4.4.domain: 58876+ PTR? 134.154.161.72.in-addr.arpa. (45) 07:46:28.884171 IP server_ip.46255 > 8.8.4.4.domain: 63027+ PTR? 195.156.251.84.in-addr.arpa. (45) 07:46:28.884217 IP server_ip.35426 > 8.8.4.4.domain: 10538+ PTR? 118.3.182.166.in-addr.arpa. (44) 07:46:28.884253 IP server_ip.53635 > 8.8.4.4.domain: 29928+ PTR? 230.94.81.83.in-addr.arpa. (43) 07:46:28.884286 IP server_ip.45787 > 8.8.4.4.domain: 41151+ PTR? 18.32.223.121.in-addr.arpa. (44) 07:46:28.946045 IP server_ip.47246 > 8.8.4.4.domain: 43103+ PTR? 81.70.251.84.in-addr.arpa. (43) 07:46:28.946066 IP server_ip.33208 > 8.8.4.4.domain: 61117+ PTR? 69.170.184.71.in-addr.arpa. (44) Anyone have any input as to what is causing this?

  Read the article

• Connections to SSH and Samba suffer from heavy delay

  - by Till Helge Helwig

  There are a lot of questions about SSH connections being delayed, which usually can be fixed by disabling the DNS lookups. Unfortunately this doesn't seem to be my problem. Our development server is accessed via SSH and Samba. When opening a connection to the server (either SSH or Samba) it takes a very long time. Accessing a Samba share via Windows is basically impossible because there is a timeout. Using smbclient works, but takes ages. When opening a SSH connection I get immediately prompted for the password and after hitting Enter the terminal instantly shows the MOTD. Afterwards it takes about a minute for the prompt to appear. I watched the load of the server while connecting via SSH and Samba and could not find anything out of order. There is nothing out of the ordinary running and hogging up memory and CPU or something. I have no clue where this delay might come from. I already tried UseDNS no in sshd_config and proxy_dns = no in smb.conf, but to no avail. Any idea about what might cause this would be greatly appreciated!

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• Some SVN Repositories not working - 405

  - by Webnet

  I have 2 groups of repositories, web and engineering. I setup web about 3 months ago and it works great, I'm trying to move engineering over to this same SVN server and I'm getting a PROPFIND of /svn/engineering/main: 405 Method Not Allowed error when I try to do a checkout. I can checkout/commit for /svn/web just fine dav_svn.conf This is the only thing uncommented in this file.... <Location /svn/web> DAV svn SVNParentPath /var/svn-repos/web AuthType Basic AuthName "SVN Repository" AuthUserFile /etc/svn-auth-file Require valid-user </Location> <Location /svn/engineering> DAV svn SVNParentPath /var/svn-repos/engineering AuthType Basic AuthName "SVN Repository" AuthUserFile /etc/svn-auth-file Require valid-user </Location> /var/svn-repos/ drwxrwx--- 3 www-data subversion 4096 2010-06-11 11:57 engineering drwxrwx--- 5 www-data subversion 4096 2010-04-07 15:41 web /var/svn-repos/web - WORKING drwxrwx--- 7 www-data subversion 4096 2010-04-07 16:50 site1.com drwxrwx--- 7 www-data subversion 4096 2010-03-29 16:42 site2.com drwxrwx--- 7 www-data subversion 4096 2010-03-31 12:52 site3.com /var/svn-repos/engineering - NOT WORKING drwxrwx--- 6 www-data subversion 4096 2010-06-11 11:56 main I get to the bottom and now realize that there's a 6 on that last one not a 7..... what does that number mean?

  Read the article

• Routing and authenticating all access through squid

  - by Knight Samar

  Hi, I want to route all Internet access in my network through a Squid proxy server and authenticate and log all users. I want this to be a client-independent setting so that no one needs to do anything on their browsers or machines. I have set my network gateway as the proxy server so that all traffic will be sent to it. I have done this using options in DHCP server. Now I tried using squid as a transparent proxy, but then it won't authenticate in that mode. I tried using iptables to route all traffic to port 3128 but it won't popup the authentication dialog box from SQUID. I tried telling DHCP to give WPAD to all clients by placing a WPAD file on a webserver containing the following for automatic proxy configuration on clients: Changes in dhcpd.conf option wpad code 252 =test; option wpad "\n\000"; option wpad "http://192.168.1.5/wpad.dat\n"; The WPAD file: function FindProxyForURL(url,host) { return "PROXY squid-server-ip-address:3128 ; DIRECT "; } But the browsers (different versions of Firefox and IE) seem to ignore it. :( What should I do ?

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

• installing mod_wsgi giving 403 error

  - by John Smiith

  installing mod_wsgi giving 403 error httpd.conf i added code below WSGIScriptAlias /wsgi "C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py" <Directory "C:/xampp/www/htdocs/wsgi_app/"> AllowOverride None Options None Order deny,allow Allow from all </Directory> wsgi_handler.py status = ‘200 OK’ output = ‘Hello World!’ response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Note: localhost is my virtual host domain and it is working fine but when i request http://localhost/wsgi/ got 403 error. <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:/xampp/www/htdocs/localhost" ServerName localhost ServerAlias www.localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" combined </VirtualHost> Error log [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache Note: My apache is not in c:/xampp/bin/apache it is in c:/xampp/bin/server-apache/

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >