Search Results

Search found 7592 results on 304 pages for 'dev g'.

Page 166/304 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• No boot loader found - dual booting Windows 8 with Ubuntu 14.04

  - by Sriram

  I have been trying in vain to dual boot my computer with Windows 8 Pro (pre-installed) and Ubuntu 14.04 64-bit. I have been able to successfully install Ubuntu 14.04, but the option to start Ubuntu does not appear on startup. This is after having taken all steps as mentioned in Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported). I even tried the boot repair option and ended up with this error log. My questions are: How do I solve for No boot loaders found in /dev/...? Are there any other recommendations that will help me solve this? Other points that may be important: Booting into Ubuntu from a live USB shows all Ubuntu partitions on the hard drive.

  Read the article

• How can I get a USB floppy drive to work?

  - by jfmessier

  I have a Toshiba USB floppy drive that I need to use under Ubuntu. When I connect it, and insert a floppy disk in it, I do not see anything mounted under Ubuntu 10.10. I was suspecting the hardware and/or the floppy disk to be defective, and so I tested the floppy disk as well as the floppy drive itself under Windows XP, and everything was just fine. I was able to find the following instructions: Add the following line to the /etc/modules file: floppy Enter the following shell commands: mkdir /media/floppy mount -t vfat /dev/sdc /media/floppy -o uid=1000 This will mount the floppy, but I would like this to happen automatically, so when I connect the drive to the USB port, it automatically mounts the floppy. How can I make this work? Or does Ubuntu only work with internal Floppy drives?

  Read the article

• Which hard disk drive is which?

  - by djeikyb

  I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? I would prefer not to tear apart my server to remove all the drives, then add back one by one. I am willing to preform reboots. The drives are inconveniently scrunched together in the case. The label information is hidden. I can open the case. Most disks are SATA, so theoretically hot swappable. So, Unplugging and tracing cables might help in answering.

  Read the article

• Is it possible to install and run Thunar 1.5.1 in Lubuntu 12.04?

  - by cipricus

  I hear that a new Thunar (with tabs!!) is ready - see this. I have added the PPA and run the update and upgrade commands but I still have Thunar 1.2.3 In Synaptic, Thunar looks ready for upgrade: It asks to uninstall some XFCE stuff that I might hope to reinstall later but then something is fishy Is this new version limited to the Xfce desktop? Also, now, when I try Update Manager, I get this: and ...unless I remove the xubuntu-dev/xfce-4.12 PPAs. So, removing Thunar in Synaptic and all that seems related to it, and then adding those PPAs, and trying to install Thunar, the following info emerges: What is to be done?

  Read the article

• recover data in linux removed with rm

  - by user3717896

  Today i deleted my home directory (in wrong action) with: sudo rm -rf * And when i use extundelete i get this message: root@ubuntu:~# sudo extundelete --restore-directory /home/hamed/ /dev/sda2WARNING: Extended attributes are not restored. Loading filesystem metadata ... 746 groups loaded. Loading journal descriptors ... 29931 descriptors loaded. Searching for recoverable inodes in directory /home/hamed/ ... 498 recoverable inodes found. Looking through the directory structure for deleted files ... 498 recoverable inodes still lost. No files were undeleted. why it can't recover? Anyone can help me to return my Desktop, Documents and etc? I have ubuntu 14.04.

  Read the article

• How do I configure wvdial to connect using a micromax 353g usb modem?

  - by user72209

  I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

  Read the article

• Should your client be able to view your project management board?

  - by bizso09

  We're making a bespoke software for our client and use Codebase for our project management. Is it a good idea to let our client view our project management board? The advantages that we thought of are that this would enhance the cooperation between the client and the dev team, following agile practices. He would essentially become part of our team. It would also reduce communication overhead and make sure we're on the same page. The client could track the progression of the system and make suggestions along the way on the user stories. In addition, he could submit bugs or feature requests. The disadvantages that we though of are that some aspects of the board might be too technical to the client. He would suggest changes to the user stories too often and he might view some content that we normally wouldn't want our client to see. For example, when we compromise on technology or functionality, the client might question that and insist on doing things one way or the other.

  Read the article

• ipod not mounting

  - by rls

  Tried to connect my iPod, but got this message: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Have seen links to this here, but beeing rather green, I don't understand much. https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/734883 What do I do now? The dmesg|tail says [ 2819.709437] sd 6:0:0:0: [sdb] 3901376 4096-byte logical blocks: (15.9 GB/14.8 GiB) [ 2819.710161] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2819.735294] sdb: [mac] sdb1 sdb2 [ 2819.738060] sd 6:0:0:0: [sdb] 3901376 4096-byte logical blocks: (15.9 GB/14.8 GiB) [ 2819.738671] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2819.738688] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2820.420130] sd 6:0:0:0: [sdb] Bad block number requested [ 2820.420167] hfs: unable to find HFS+ superblock [ 2820.612140] sd 6:0:0:0: [sdb] Bad block number requested [ 2820.612191] hfs: unable to find HFS+ superblock

  Read the article

• Connecting Galaxy Note: Unable to mount Android Error initializing camera: -53: Could not claim the USB device

  - by Claudiu

  I'm running cm9 ics on my Galaxy Note and i tried anything i could find googleing around but to no result, if i look on the phone in usb settings there is the option for mass storage but it's grey and therefore not selectable I don`t know what the problem is but i saw somwhere that it might be an old version of libmtp so i tried to install libmtp 1.1.3 with ./configure make make install but even after when i try mtp-detect it gives me libmtp 1.1.1 is it normal? anyway when i run mtp-detect here is what it gives me libmtp version: 1.1.1 Listing raw device(s) Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. Found 1 device(s): Samsung: GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note (04e8:6860) @ bus 2, dev 6 Attempting to connect device(s) ignoring usb_claim_interface = -99PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device ignoring usb_claim_interface = -99LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. Thanks in advamce

  Read the article

• How do you avoid working on the wrong branch?

  - by henginy

  Being careful is usually enough to prevent problems, but sometimes I need to double check the branch I'm working on (e.g. "hmm... I'm in the dev branch, right?") by checking the source control path of a random file. In looking for an easier way, I thought of naming the solution files accordingly (e.g. MySolution_Dev.sln) but with different file names in each branch, I can't merge the solution files. It's not that big of a deal but are there any methods or "small tricks" you use to quickly ensure you're in the correct branch? I'm using Visual Studio 2010 with TFS 2008.

  Read the article

• Code review process when using GIT as a repository?

  - by Sid

  What is the best process for code review when using GIT? Current process: We have a GIT server with a master branch to which everyone commits Devs work off the local master mirror or a local feature branch Devs commit to server's master branch Devs request code review on last commit Problem: Any bug in code review are already in master by the time it's caught. Worse, usually someone has burnt a few hours trying to figure out what happened... So, we would like To do code review BEFORE delivery into the 'master'. Have a process that works with a global team (no over the shoulder reviews!) something that doesn't require an individual dev to be at his desk/machine to be powered up so someone else can remote in (remove human dependency, devs go home at different timezones) We use TortoiseGIT for a visual representation of a list of files changed, diff'ing files etc. Some of us drop into a GIT shell when the GUI isn't enough, but ideally we'd like the workflow to be simple and GUI based (I want the tool to lift any burden, not my devs).

  Read the article

• Removing AppPrincipals from Office365

  - by Sahil Malik

  SharePoint, WCF and Azure Trainings: more information So here is an annoying issue. If I have your AppPrincipal and secret, I can party as you! But as we go through our usual dev cycles, we create these ApplicationIDs. Hell Visual Studio will create them for us, to make things easy!The problem is, many a developer, and some a ITOgre, may leave these AppPrincipalIds sitting there and not clean them up when they are done playing. You can look for currently registered App Principals at https://yourtenant/_layouts/15/appprincipals.aspx The problem is, that URL shows you App Principals registered AND currently in use. Currently NOT in use App Principals are NOT shown on that page. The same issue applies on premises also, even though here I am talking specifically about Office 365. Getting rid of these in On-Prem is easy, just use the Object model (server side). Read full article ....

  Read the article

• how can i fix this problem with mount volume in ubuntu 10.10?

  - by Ali Unlu

  I have two operating system: ubuntu 10.10 and windows 7 ultimate. I trisected my HDD.One of these is for main Windows files,one of this for ubuntu system and the last drive which must be accessible on both of two system is for common files (musics, films, etc). This last partition is J: in Windows. Unfortunately when I was setting up ubuntu 10.10 while disk partition, I forgot mount my J drive as /windows and accidentally mounted it as swap . Then, I tried to do this visible in ubuntu.But I couldn't myself. Device : /dev/sda4 and whenever I try to do this I always get this error : Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, none is already mounted on none mount failed

  Read the article

• Testing To Prevent Cascading Bugs

  - by jfrankcarr

  Yesterday, Twitter was hit with a "Cascading Bug" as described in this blog post: A “cascading bug” is a bug with an effect that isn’t confined to a particular software element, but rather its effect “cascades” into other elements as well. I've seen this kind of bug, on a smaller scale of course, on some projects I've worked on. They can be difficult to identify in dev/test environments, even within a test driven development environment. My questions are... What are some strategies you use, beyond the basic TDD and standard regression testing, to identify and prevent the potential trouble points that might only occur in the production environment? Does the presence of such problems indicate a breakdown in the software development process or simply a by-product of complex software systems?

  Read the article

• Basic Ubuntu FTP Server

  - by JPrescottSanders

  I would like to setup a basic FTP server on my Ubuntu Server install. I have been playing with VSFTPD, but am having issues getting the server to allow me to create directories and copy files. I have set the system to allow local users, but it appears that doesn't mean I get access to create directories. This may be an instance where I need to be better grounded in Unbuntu server setup in order to configure this FTP server adequately. The end goal is to be able to move files from my local dev folder into my www folder for deployment. Directories need to be able to move as well. Any help would be greatly appreciated.

  Read the article

• Profiling NetBeans 7.0 Beta 2 and Reporting Problems

  - by christopher.jones

  With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones   23230     1  0 16:07 ?        00:00:00 /bin/bash /home/cjones/netbeans-cjones   23438 23230  2 16:07 ?        00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num     #instances         #bytes  class name----------------------------------------------   1:         12075        9028656  [I   2:         49535        6581920  <constMethodKlass>   3:         49535        3964128  <methodKlass>   4:         80256        3840776  <symbolKlass>   5:         36093        3635336  [C   6:          5095        3341312  <constantPoolKlass>   7:          5095        2486016  <instanceKlassKlass>   8:          4325        1961432  <constantPoolCacheKlass>   9:         18729        1763976  [B  10:         59952        1438848  java.util.HashMap$Entry  . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

  Read the article

• Android, OpenGL and extending GLSurfaceView?

  - by Spoon Thumb

  This question is part-technical, part-meta, part-subjective and very specific: I'm an indie game dev working on android, and for the past 6 months I've struggled and finally succeeded in making my own 3D game app for android. So I thought I'd hop on SO and help out others struggling with android and openGL-ES However, the vast majority of questions relate to extending GLSurfaceView. I made my whole app without extending GLSurfaceView (and it runs fine). I can't see any reason at all to extend GLSurfaceView for the majority of questions I come across. Worse, the android documentation implies that you ought to, but gives no detailed explaination of why or what the pros/cons are vs not extending and doing everything through implementing your own GLSurfaceView.Renderer as I did Still, the sheer volume of questions where the problem is purely to do with extending GLSurfaceView is making me wonder whether actually there is some really good reason for doing it that way vs the way I've been doing it (and suggesting in my answers to others to do). So, is there something I'm missing? Should I stop answering questions in the meantime? Android openGL documentation

  Read the article

• How to hide bind mounts in nautilus?

  - by Bazon

  Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

  Read the article

• How to retrieve data from a corrupted volume

  - by explorex

  Hi, My Ubuntu 10.10 just crashed, probably due to hardware error (and in the end I was getting errors like Unknown filesystem ..... grub> .., and it went to the GRUB console before I could take any other action). I reinstalled the same version from a USB stick. I had Ubuntu installed with the ext4 file system and I also have the same filesystem in the same hard disk on a different drive. When I try to access my previous filesystem, I get errors: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so I had some important files in the previous volume ; I don't know how to retrieve them. And what are the chances that I would get the same outcome (hardware error)? Please help me!

  Read the article

• How can I generate signed distance fields (2D) in real time, fast?

  - by heishe

  In a previous question, it was suggested that signed distance fields can be precomputed, loaded at runtime and then used from there. For reasons I will explain at the end of this question (for people interested), I need to create the distance fields in real time. There are some papers out there for different methods which are supposed to be viable in real-time environments, such as methods for Chamfer distance transforms and Voronoi diagram-approximation based transforms (as suggested in this presentation by the Pixeljunk Shooter dev guy), but I (and thus can be assumed a lot of other people) have a very hard time actually putting them to use, since they're usually long, largely bloated with math and not very algorithmic in their explanation. What algorithm would you suggest for creating the distance fields in real-time (favourably on the GPU) especially considering the resulting quality of the distance fields? Since I'm looking for an actual explanation/tutorial as opposed to a link to just another paper or slide, this question will receive a bounty once it's eligible for one :-). Here's why I need to do it in real time: There's something else:

  Read the article

• Lead/Manager vs Individual contributor which is better?

  - by User11091981

  Currently I am working in a company as a Manager (software dev). But I only have 6.8 yrs experience. I joined this company as a software engineer and got promoted to SSE, Lead and Manager. Some of my team members are having better experience than me, and I feel like I need to have more exposure/experience to take these roles. I feel like it is better to be an individual contributor learn many things for another couple of years and become a Principal Software Engineer, rather than involving in Management. Options I have: 1. Ask my current employer to make me an individual contributor? 2. Find a new company and join as an SSE to start over? 3. Find a new company for a lead position? Please advice.

  Read the article

• 12.10: How to hide bind mounts in nautilus?

  - by Bazon

  Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

  Read the article

• Asking about deleted partition at boot

  - by Shawn Mitchell

  I have Ubuntu installed through Wubi. I also had another partition on my computer to try out the dev preview of Windows 8 aptly named Windows_8. After I was done playing, I deleted the Windows 8 partition and added the extra space back to my Win7/Wubi partition. Now every time I boot into Ubuntu, it tells me that it can't mount the partition and asks me if I want to recover or skip it. Is there a way to get Ubuntu to forget about this partition so I can skip this extra step in my boot? Thanks

  Read the article

• No boot option after installing ubuntu 12.04 inside windows xp and drive h: is also gone

  - by Lynch

  My H: Drive is gone. After after installing Ubuntu 12.04 inside windows. When I installed Ubuntu 12.04 from USB inside windows in drive H: ( dev/sdv7) when the installation finished it said to restart, when I restarted I did not see an option to boot Ubuntu or windows. When it automatically booted into windows my H: drives is also gone. Now how can I dual boot to choose whether to boot Ubuntu or Windows. It shows nothing when the installation is finished and when I restarted my pc.

  Read the article

• TortoiseSVN and Subclipse icons not updating with SVN? [migrated]

  - by Thomas Mancini

  I have a repository on a network share with working directories on two separate machines. Upon making changes to my local working directory and committing them, the icons are not changing on the other developer's machine. If the Dev goes to Team Synchronize with Repository it shows the changes in the Synchronize view within Eclipse, however I was expecting the icon next to the project to change if it is not in sync with the repository. The same happens with TortoiseSVN in Windows Explorer. If we right click and check the repository for modifications it shows them, however the overlay icon on the directory is still the green check box. Am I just misinterpreting what I expect to happen, or is there a way to get these icons to change if the project is no longer in sync with the repository?

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >