Search Results

Search found 5786 results on 232 pages for 'fast'.

Page 166/232 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

• What's Happening in Business Analytics at OpenWorld 2012?

  - by jmorourke

  Oracle OpenWorld 2012 is rapidly approaching on September 30th when we take over the city of San Francisco for five days.  The Business Analytics this year is our strongest ever with over 150 EPM, BI, Analytics and Data Warehousing sessions delivered by Oracle, our customers and partners.  We’ll also have Hands-On Labs, 20 demo pods dedicated to Business Analytics products, and over 30 partners exhibiting their solutions.  So what’s hot in the Business Analytics program at OpenWorld?  Here are some of the “can’t miss” sessions at this year’s conference: The EPM and BI general sessions, led by SVP of Product Development Balaji Yelamanchili will highlight what’s new provide a view into Oracle’s EPM, BI and Analytics strategies.  Both sessions are scheduled on Monday, October 1st. Thursday Keynote:  See More, Act Faster:  Oracle Business Analytics, led by Oracle President Mark Hurd, will provide a view into Oracle’s strategy for Business Analytics, especially engineered systems designed to provide extreme performance for the most rigorous analytic tasks. Superfast Business Intelligence with Oracle Exalytics.  Hear about various business intelligence scenarios in which Oracle Exalytics provides exemplary value—from operational reporting and prepackaged applications to analytics on unstructured data. Turn Insights into Real-Time Actions with Oracle Business Intelligence Mobile.  Learn how Oracle Business Intelligence Mobile enables organizations to deliver relevant information and turn insight into real-time action, no matter where employees are located. Empowering the Business User: Introduction to Oracle Endeca Information Discovery.  Find out how you can find fast answers to the new questions that confront your business every day, while avoiding the confusion and inconsistencies brought about by spreadsheets and desktop tools. Big Data:  The Big Story.  Learn how to harness big data, your existing data, and predictive analytics to make better decisions in an environment of rapid shifts in behavior and instant feedback.  Learn about the technologies that constitute a big data architecture, how to leverage and implement advanced analytics for real-time decisions, and the tools needed to know the unknown. Planning at the Speed of Business with Oracle Exalytics.  Learn how Oracle Hyperion Planning leverages the power of Oracle Exalytics to do planning faster, with more detail and more users than ever. For more details on these and other Business Analytics sessions at OpenWorld, download the Focus On Business Analytics program guide at:  http://www.oracle.com/openworld/focus-on/index.html We look forward to seeing you in San Francisco!

  Read the article

• How can we unify business goals and technical goals?

  - by BAM

  Some background I work at a small startup: 4 devs, 1 designer, and 2 non-technical co-founders, one who provides funding, and the other who handles day-to-day management and sales. Our company produces mobile apps for target industries, and we've gotten a lot of lucky breaks lately. The outlook is good, and we're confident we can make this thing work. One reason is our product development team. Everyone on the team is passionate, driven, and has a great sense of what makes an awesome product. As a result, we've built some beautiful applications that we're all proud of. The other reason is the co-founders. Both have a brilliant business sense (one actually founded a multi-million dollar company already), and they have close ties in many of the industries we're trying to penetrate. Consequently, they've brought in some great business and continue to keep jobs in the pipeline. The problem The problem we can't seem to shake is how to bring these two awesome advantages together. On the business side, there is a huge pressure to deliver as fast as possible as much as possible, whereas on the development side there is pressure to take your time, come up with the right solution, and pay attention to all the details. Lately these two sides have been butting heads a lot. Developers are demanding quality while managers are demanding quantity. How can we handle this? Both sides are correct. We can't survive as a company if we build terrible applications, but we also can't survive if we don't sell enough. So how should we go about making compromises? Things we've done with little or no success: Work more (well, it did result in better quality and faster delivery, but the dev team has never been more stressed out before) Charge more (as a startup, we don't yet have the credibility to justify higher prices, so no one is willing to pay) Extend deadlines (if we charge the same, but take longer, we'll end up losing money) Things we've done with some success: Sacrifice pay to cut costs (everyone, from devs to management, is paid less than they could be making elsewhere. In return, however, we all have creative input and more flexibility and freedom, a typical startup trade off) Standardize project management (we recently started adhering to agile/scrum principles so we can base deadlines on actual velocity, not just arbitrary guesses) Hire more people (we used to have 2 developers and no designers, which really limited our bandwidth. However, as a startup we can only afford to hire a few extra people.) Is there anything we're missing or doing wrong? How is this handled at successful companies? Thanks in advance for any feedback :)

  Read the article

• High-Powered Sites for low Cost

  - by HighAltitudeCoder

  Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

  Read the article

• Weird Ubuntu Desktop Boot Partition On External Hard Drive

  - by Magnitus

  I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• Wifi problems with Ubuntu 13.10

  - by Sparrowhawk4

  I should probably say straight off that I am brand new to Ubuntu. I installed 13.10 alongside Windows 7 a couple of days ago and I've managed to clear up all the little problems, apart from with the wifi. My internet is fine using an ethernet cable. I can connect to the wifi, and it tells me that the signal is good, but for the vast majority of the time I can't load anything, and system monitor tells me that I am sending and receiving nothing. The problem is somewhere in Ubuntu. It works fine on Windows 7, my Android phone and all of my flatmates laptops. I know I'm not the only one with this problem, but the fixes I've seen either don't work or I don't understand them enough to carry them out. Help? EDIT: from lspci command as requested 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• Introduction to Agile Development

  - by Grant Fritchey

  Even though my current job is a little weird, I still consider myself to be a DBA. I didn’t start that way in IT. I came through support and into development. I loved development. There was a constant struggle to attempt to improve your code, your understanding, and, most importantly, the process of development itself. Development can be slow and tedious. Left alone, developers can simply disappear to build a project and not come back for two years, at which time they deliver it. But, maybe that software isn’t what you wanted, or it’s no longer needed, or who knows what. So developers are constantly attempting to improve their processes in order to deliver more relavent software quicker (something DBAs could learn about). I really admire it. One of the many processes that has come out of that constant striving is known as Agile. As the name implies, Agile development attempts to come up with a quick, fast turning, business aware, well, for want of a word, agile, process that is more responsive to the needs of the business. There are tons and tons of books and blogs and videos on the subject that can get you going. But, Agile isn’t easy (note, Easy is not part of the name). Agile processes can be hard. I’ve worked on multiple agile teams, some successful, some not. The two principal differences between the teams were their discipline and their knowledge of the process. Discipline, that comes from within. But knowledge, ah, well there I can help. Red Gate is bringing a series of free instructional events to the United States in a few weeks time focused primarily on SQL Server (click here right now to register while there’s still space). We’re also offering some .NET instruction too. That’s a full day, free, with top experts in the business. But, the next day, there’s a full day session introducing Agile. You can go to this and learn how to do Agile. Develop that knowledge that will enable you to successfully use the Agile process. Go to this web site to check it out. No, this event is not free, but not everything can be. And it’s not just for developers. DBAs, you need to learn this stuff too. Management could also benefit from understanding these processes (because you guys can help to enforce discipline). It’s really for everyone involved in the development process.

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Are we queueing and serializing properly?

  - by insta

  We process messages through a variety of services (one message will touch probably 9 services before it's done, each doing a specific IO-related function). Right now we have a combination of the worst-case (XML data contract serialization) and best-case (in-memory MSMQ) for performance. The nature of the message means that our serialized data ends up about 12-15 kilobytes, and we process about 4 million messages per week. Persistent messages in MSMQ were too slow for us, and as the data grows we are feeling the pressure from MSMQ's memory-mapped files. The server is at 16GB of memory usage and growing, just for queueing. Performance also suffers when the memory usage is high, as the machine starts swapping. We're already doing the MSMQ self-cleanup behavior. I feel like there's a part we're doing wrong here. I tried using RavenDB to persist the messages and just queueing an identifier, but the performance there was very slow (1000 messages per minute, at best). I'm not sure if that's a result of using the development version or what, but we definitely need a higher throughput[1]. The concept worked very well in theory but performance was not up to the task. The usage pattern has one service acting as a router, which does all reads. The other services will attach information based on their 3rd party hook, and forward back to the router. Most objects are touched 9-12 times, although about 10% are forced to loop around in this system for awhile until the 3rd parties respond appropriately. The services right now account for this and have appropriate sleeping behaviors, as we utilize the priority field of the message for this reason. So, my question, is what is an ideal stack for message passing between discrete-but-LAN'ed machines in a C#/Windows environment? I would normally start with BinaryFormatter instead of XML serialization, but that's a rabbit hole if a better way is to offload serialization to a document store. Hence, my question. [1]: The nature of our business means the sooner we process messages, the more money we make. We've empirically proven that processing a message later in the week means we are less likely to make that money. While performance of "1000 per minute" sounds plenty fast, we really need that number upwards of 10k/minute. Just because I'm giving numbers in messages per week doesn't mean we have a whole week to process those messages.

  Read the article

• Collision detection problem in XNA

  - by Fantasy

  I'm having two problems with my collision detection in XNA. There are two boxes, the red box represents a player and the blue box represents a wall. The first problem is when the player moves to the upper side or bottom side of the wall and collides with it, and then try to go to the left or right, the player will just jump in the opposite direction as seen in the video. However if I go to the right side or the left side of the wall and try to go up or down the player will smoothly go up or down without jumping. The second problem is that when I collide with the box and my key is still pressed down the blue box goes half way through red box and and goes back out and it keeps doing that until I stop pressing the keyboard. its not very clear on the video but the keeps going in and out really fast until I stop pressing the key. Here is a video example:- http://www.youtube.com/watch?v=mKLJsrPviYo and Here is my code Vector2 Position; Rectangle PlayerRectangle, BoxRectangle; float Speed = 0.25f; enum Direction { Up, Right, Down, Left }; Direction direction; protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); KeyboardState keyboardState = Keyboard.GetState(); if (keyboardState.IsKeyDown(Keys.Up)) { Position.Y -= (float)(Speed * gameTime.ElapsedGameTime.TotalMilliseconds); direction = Direction.Up; } if (keyboardState.IsKeyDown(Keys.Down)) { Position.Y += (float)(Speed * gameTime.ElapsedGameTime.TotalMilliseconds); direction = Direction.Down; } if (keyboardState.IsKeyDown(Keys.Right)) { Position.X += (float)(Speed * gameTime.ElapsedGameTime.TotalMilliseconds); direction = Direction.Right; } if (keyboardState.IsKeyDown(Keys.Left)) { Position.X -= (float)(Speed * gameTime.ElapsedGameTime.TotalMilliseconds); direction = Direction.Left; } if (PlayerRectangle.Intersects(BoxRectangle)) { if (direction == Direction.Right) Position.X = BoxRectangle.Left - PlayerRectangle.Width; else if (direction == Direction.Left) Position.X = BoxRectangle.Right; if (direction == Direction.Down) Position.Y = BoxRectangle.Top - PlayerRectangle.Height; else if (direction == Direction.Up) Position.Y = BoxRectangle.Bottom; } PlayerRectangle = new Rectangle((int)Position.X, (int)Position.Y, (int)32, (int)32); base.Update(gameTime); }

  Read the article

• Differences between a retail and wholesale website, and how difficult would it be to integrate them? [closed]

  - by kmy

  I was told to come here for some guidance, I know that my questions can be quite broad, but I just really want some kind of direction to go towards (links, articles, etc). So here it goes: For the past month I have been planning and started implementing a wholesale website, but plans got changed on me and I need to allow both retail and wholesale orders which will also depend on whether the account is a regular customer or also has a seller account. There are various types of products and it has been decided that I would use subcategories as tables to organize them and allow various specific item fields. So here are some of my specific questions: How different is the database structure for each item to be available for both wholesale and retail? Will it just be adding a quantity column and have two different pricing, or much more complicated? I am unaware if there's any price tables but would that be more difficult? They use Quickbooks POS software, how difficult/inefficient will it be to update inventory quantities if they have like 2000-4000 products? And what would be the best ways to extract the information and update the system? I know it export an excel spreadsheet so maybe a suggested php plugin for it? How difficult is this project in your professional opinion, and how big should a team usually be? (At the moment it is just me.) Projected time for planning, implementation, and quality assurance in accordance to team size? I am an entry level developer and I know that I do not have enough knowledge to direct myself on this website...What kind of web developer skills will I need to find to help me? (My company is willing to hire people to get this website done as fast as possible.) Also, what would be some great questionnaires to ask the product stakeholder about what he wants from the website? (He has made it clear he is neither computer or internet savvy...) Sorry for the amount of questions, I'm an entry level web developer and do not have a senior to look up to for guidance. I have knowledge in HTML, CSS, Javascript, jQuery, PHP, MySQL, phpMyAdmin. I have never used any frameworks like Zend, Magento, etc, and is doing this all from scratch. So far the website is built in an object oriented way, MVC architecture to the best of my abilities, but I have many doubts because I would really want to have this done right. If I have been unclear on some parts please tell me and I'll add more detail. I'm sure I'll have more additional questions later on, if anyone is open to that please tell me. Thanks in advance!

  Read the article

• How do I stop Sophos anti virus from scanning directories that are under source control

  - by user26453

  From googling it seems its well known that SophosAV as well as other AV programs have issues with how they interact and can inhibit source control utilities like TortoiseHG or TortoiseSVN. One solution is to exclude directories under source control from on-access scanning as detailed here on Sophos's support site. There is a corollary article that mentions some issues related to this, namely the need to place multiple entries for exclusions based on the possibility of the location being accessed through the short vs. long name (e.g., Progra~1 vs. "Program Files"). One other twist is I am using a junction to relocate my user directory, C:\Users\Username, to a second hard drive, E:. Since I am not sure how this interacts I have included the source control directory as they are nested in both locations. As a result, I have included the two exclusions for the on-access scanning exclusions (and to be on the safe side on-demand exclusions as well, although this should only come into play when I select a parent directory of the exclusion to be scanned on-demand, but still). You'll notice I have no need to add extra exclusions for those locations based on short vs. long name distinctions. The two exclusion I have then, for both on-access and on-demand scanning exclusions are: C:\Users\Username\source-control-directory E:\source-control-directory However, this does not seem to work as TortoiseHG still lags terribly in response to any request as AV software starts scanning when the directory is accessed via TortoiseHG. I can verify without a doubt that Sophos is causing the problems: I can completely disable on-access scanning. Once this is done TortoiseHG responds very fast to all operations. I cannot leave this disabled obviously, but since the exclusion don't seem to be working, what next?

  Read the article

• Server 2008 RAID5 resynching

  - by benpage

  I built a W2K8 R2 server last weekend, and built a R5 array using Disk Management, 5x 1TB drives. For the next 60 hours the status said 'Resynching (X%)' as it built the array. during this time i did read and write to the drive (slowly) and once the rebuild was complete speeds were quite fast. I was copying over some data from a USB hard drive overnight, and the machine crashed (looking in the error i believe it was the driver for the usb drive) and so the RAID5 went back to resynching, since the machine was not shut down properly. The issue is, it's been about 48 hours since that started and I'm happy to say it will take roughly 60 hours again to resynch, however.. all this time in Disk Management, the status has only said 'Resynching', not 'Resynching (X%)'. The hard drive light is going nuts, and read/writes are slow again, so I'm assuming it is actually resynching. The question is - is that a correct assumption? and why is disk management not telling me what %age it's done? Is this normal behaviour for a not-properly-shut-down r5 array?

  Read the article

• Mac OS X 10.6 Setup for Apache/MySQL/Perl

  - by Russell C.

  I just got a new Mac and have been trying to setup a local development environment for my perl applications for a few days now with no luck. I'm getting no where fast so I hope someone else who has done this successfully could help. I started by installing MAMP which I thought would take care of everything for me but unfortunately it doesn't take care of some important perl modules. I used CPAN to install all our required modules except that it seems DBD::mysql doesn't install correctly through CPAN. After reading a lot online, lots of people reported problems with this and recommended using MacPorts to install the module which I have tried doing with no luck using the following command: sudo port install p5-dbd-mysql After what seems like a successful install of DBD::mysql, Apache continues to report the following error when trying to run any of our Perl scripts: [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at (eval 1835) line 3. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Perhaps the DBD::mysql perl module hasn't been fully installed, [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] or perhaps the capitalisation of 'mysql' isn't right. [Fri Apr 30 18:51:07 2010] [error] [client 127.0.0.1] Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge. I'm not sure where to go from here but my Mac isn't much of a development environment if Perl isn't able to talk to the database. I'd really appreciate any help and advice you might be able to provide in getting my system setup successfully. Thanks in advance!

  Read the article

• How to compare old laptop to new laptop?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• bonding module parameters are not shown in /sys/module/bonding/parameters/

  - by c4f4t0r

  I have a server with Suse 11 sp1 kernel 2.6.32.54-0.3-default, with modinfo bonding i see all parameters, but under /sys/module/bonding/parameters/ not modinfo bonding | grep ^parm parm: max_bonds:Max number of bonded devices (int) parm: num_grat_arp:Number of gratuitous ARP packets to send on failover event (int) parm: num_unsol_na:Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event (int) parm: miimon:Link check interval in milliseconds (int) parm: updelay:Delay before considering link up, in milliseconds (int) parm: downdelay:Delay before considering link down, in milliseconds (int) parm: use_carrier:Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default) (int) parm: mode:Mode of operation : 0 for balance-rr, 1 for active-backup, 2 for balance-xor, 3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, 6 for balance-alb (charp) parm: primary:Primary network device to use (charp) parm: lacp_rate:LACPDU tx rate to request from 802.3ad partner (slow/fast) (charp) parm: ad_select:803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2) (charp) parm: xmit_hash_policy:XOR hashing method: 0 for layer 2 (default), 1 for layer 3+4 (charp) parm: arp_interval:arp interval in milliseconds (int) parm: arp_ip_target:arp targets in n.n.n.n form (array of charp) parm: arp_validate:validate src/dst of ARP probes: none (default), active, backup or all (charp) parm: fail_over_mac:For active-backup, do not set all slaves to the same MAC. none (default), active or follow (charp) in /sys/module/bonding/parameters ls -l /sys/module/bonding/parameters/ total 0 -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_grat_arp -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_unsol_na I found some of this parameters under /sys/class/net/bond0/bonding/, but when i try to change one i got the following error echo layer2+3 > /sys/class/net/bond0/bonding/xmit_hash_policy -bash: echo: write error: Operation not permitted

  Read the article

• Drop outs when accessing share by DFS name.

  - by Stephen Woolhead

  I have a strange problem, aren't they all! I have a DFS root \domain\files\vms, it has a single target on a different server than the namespace. I can copy a test file set from the target directly via \server\vms$\testfiles and all is well, the files copy fine. I have repeated these tests many times. If I try and copy the files from the dfs root I get big pauses in the network traffic, about 50 seconds every couple of minutes, all the traffic just stops for the copy. If I start another copy between the same two machines during this pause, it starts copying fine, so I know it's not an issue with the disks on the server. Every once in a while the copy will fail, no errors, the progress bar will just zip all the way to 100% and the copy dialog will close. Checking the target folder show that the copy is incomplete. I've moved the LUN to another server and had the same problem. The servers are all 2008 R2, the clients are Vista x64, Windows7 x64 and 2008 R2, all have the same problem. Anyone got any ideas? Cheers, Stephen More Information: I've been running a NetMon trace on the connection when the file copy fails and what seems to be standing out is that when opening a file that the copy completes on the SMB command looks like this: SMB2: C CREATE (0x5), Name=Training\PDC2008\BB34 Live Services Notifications, Awareness, and Communications.wmv@#422082, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 245376 SMB2: R CREATE (0x5), Context=MxAc, Context=RqLs, Context=DHnQ, Context=QFid, FID=0xFFFFFFFF00000015, Mid = 245376 But for the last file when the copy dialog closes looks like this: SMB2: C CREATE (0x5), Name=gt\files\Media\Training\PDC2008\BB36 FAST Building Search-Driven Portals with Microsoft Office SharePoint Server 2007 and Microsoft Silverlight.wmv@#859374, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 77 SMB2: R , Mid = 77 - NT Status: System - Error, Code = (58) STATUS_OBJECT_PATH_NOT_FOUND The main difference seems to be in the name, one is relative to the open file share, the other has gained the gt\files\media prefix which is the name of the DFS target. These failures are always preceded by logoff and back on of the SMB target. Might have to bump this one to PSS.

  Read the article

• Remote Desktop Mobile mangles barcodes coming from scanner

  - by sfonck

  We have an application here using handhelds to scan barcodes. These handhelds are actually making a remote desktop session towards a server where the application runs. Works fine. Now we have bought some new Motorola MC55's running 'Windows Mobile 6.1 Classic', and when using the application over remote desktop: it mangles the characters of the barcodes.... I already tried following things: When scanning a barcode on the MC55 itself it is displayed correctly When scanning a barcode via the remote desktop into a notepad session it is incorrect. Played with all options of the 'Remote Desktop Mobile' - no result Disabled 'autocorrect' and 'suggest words when entering text' on the input settings - no result The strange things is: a barcode which consists of only numbers gets scanned correctly the mangled characters comes through in lower case For some codes \t is mangled in between (should normally be entered after the barcode) e.g.: 'PERIN4' becomes 'ERINp4' 'MGZB' becomes 'GZB m' 'BAK664' becomes 'AK664 b' 'MAGBFA01' becomes 'AGBFmA01' '5021879949500' gets scanned correctly Final solution: Suppllier of the handhelds said the handheld was sending the characters too fast over the remote desktop connection. They changed the handheld to wait for 50ms between sending each character, which produced correct results right now. Scanning a barcode became somewhat slower but it's almost not remarkable to endusers.

  Read the article

• How do I identify and fix the cause of transaction log growth on SIMPLE recovery model databases?

  - by Stuart B

  I recently upgraded our SQL Server 2008 installations to service pack 2. One of our databases is on the simple recovery model, but its transaction log is growing extremely fast. The path I'm currently investigating is that we have a transaction somewhere out there stuck in active state. Here is why: select name, recovery_model_desc, log_reuse_wait_desc from sys.databases where name in ('SimpleDB') name recovery_model_desc log_reuse_wait_desc SimpleDB SIMPLE ACTIVE_TRANSACTION When I check my active transactions, I get the following. Note that I installed SP2 and restarted our server on 12/25 at around noonish. select transaction_id, name, transaction_begin_time, transaction_type from sys.dm_tran_active_transactions transaction_id name transaction_begin_time transaction_type 233 worktable 2010-12-25 12:44:29.283 2 236 worktable 2010-12-25 12:44:29.283 2 238 worktable 2010-12-25 12:44:29.283 2 240 worktable 2010-12-25 12:44:29.283 2 243 worktable 2010-12-25 12:44:29.283 2 245 worktable 2010-12-25 12:44:29.283 2 62210 tran_sp_MScreate_peer_tables 2010-12-25 12:45:00.880 1 55422856 user_transaction 2010-12-28 16:41:56.703 1 55422889 SELECT 2010-12-28 16:41:57.303 2 470 LobStorageProviderSession 2010-12-25 12:44:30.510 2 Note that according to the documentation a transaction_type of 1 means read/write, and 2 means read-only. So, my line of thinking is that the trans_sp_MScreate_peer_tables transaction is stuck for some reason and holding up transaction log truncation. Is this a plausible scenario? Correct me if my line of thinking is off, as I'm not a SQL Server expert. If this is correct, how do I erase that transaction so that my transaction log is truncated as usual?

  Read the article

• Enabling syntax highlighting for LESS in Programmer's Notepad?

  - by Cody Gray

  When I don't feel like firing up the Visual Studio behemoth, or when I don't have it installed, I always turn to Programmer's Notepad. It's an amazingly light and fast little text editor, with the special advantage that it is completely platform-native and conforms to standard UI conventions. Therefore, please do not suggest that I consider using other text editors. I've already considered and rejected them because they do not use native UI controls. I like Programmer's Notepad, thank you very much. Unfortunately, I've recently begun to learn, use, and love LESS for all of my CSS coding needs, and it appears that Programmer's Notepad is not bundled with a syntax highlighting scheme for LESS. Does anyone know if there is—by chance and good fortune—one already available somewhere on the web that some kind soul has tediously prepared? If not, how can I go about writing one of my own? Is there a way to build on the existing CSS scheme? It's also possible that any code coloring scheme designed for Scintilla-based editors will work, as Programmer's Notepad is based on the Scintilla control. If you know of a LESS highlighting scheme for Scintilla-based editors, and how to use that with Programmer's Notepad, please suggest that as well.

  Read the article

• setting up synergy (multi-computer shared input devices) new to mac

  - by pedalpete

  I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

  Read the article

• Windows 7: Don't combine Taskbar Icons, but only display Icons

  - by cable729

  I've never really liked this feature about Win7, but I guess I just got used to it. The feature I don't like is mousing over the win7 icons when there are multiple windows of the same type open. You have to waste that extra time choosing the window after it pops up and it's just clunky. The XP taskbar was nice, because you didn't have to go through any of this, but it had the problem where you ran out of taskbar space fast. I often resized my taskbar to take care of this. However, on Windows 7, I don't use up even 1/3 of my taskbar. I have all this space I can use, and instead it's all squished to the left, making me take extra steps. Are there any applications I can use to get this desired behavior, or else what route would you recommend to take to write this behavior myself? My first thought would be C# and the Windows taskbar apis. PS. If it's not clear what I'm asking for, please let me know, I'll try to be more specific.

  Read the article

• Dell Poweredge 2600 RAID Transfer How-to

  - by DCookie

  Help, please! Hardware: Dell Poweredge 2600 PERC 4 SCSI Drives, 1 standalone 3 in a RAID 5 configuration OS: Windows 2000 Server In other words, a fairly old system. Anyway, we are in the process of taking over support for this site. The current tech wants out and is fading from view fast, so we need to solve this problem: The standalone disk (where the OS was) failed. We've replaced the disk, installed the OS, but need to know exactly how to proceed from here. I've never worked with a RAID system before, so I don't want to touch anything without knowing what I'm doing. We are not certain if the site will want us to attempt to recover the array or wait for the old tech to become available. We have replaced the server with a temporary box, and recovered MOST of the data from an online backup service. However, the other tech failed to backup a part of the data and the only copy of it is on this RAID array. Hence, our caution. We have poked minimally around in the boot-up PERC config utility, and it seems to me that that's where we'll need to be to reclaim the array. Another possibility is that there is some Dell software for the RAID controller we need to acquire. Can anyone provide clues as to how to proceed from here? Any help GREATLY appreciated.

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >