Search Results

Search found 5998 results on 240 pages for 'rise against'.

Page 166/240 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

  • Using OSX home directories from linux

    - by Steffen
    I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

    Read the article

  • RAM ok in memtest86+ == RAM ok after wake from sleep?

    - by twon33
    I have a Windows XP (32-bit) system that appears stable in normal operation, but was repeatably freezing (hard lock, no BSOD) a minute or so after waking from S3 sleep. Some Googling against the motherboard model and memory manufacturer suggested that I might need to bump up the memory voltage, so I tried it and it now seems to resume without freezing. However, I don't really trust it and I'd like to validate that it's actually stable, especially after resuming from sleep. I've run Prime95 for a few hours with no issues, and am planning an overnight run of Memtest86+, which I expect to pass because the system has been solid whenever I've run it without putting it to sleep. Does something like Memtest86+ exist that actually invokes S3 sleep during operation? Clearly it would need an operator to wake the computer to resume testing, but I don't think I've ever heard of a memory test tool that can do this. Alternately, am I wasting my time? Should a clean bill of health from Memtest86+ indicate stability regardless of whether sleep is involved, or, conversely, does my original problem indicate that Memtest86+ would have failed eventually with the stock voltage if I'd run it, sleep or not?

    Read the article

  • How to get back the themes feature in Windows XP?

    - by Martín M.
    When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

    Read the article

  • How to make a Linux software RAID1 detect disc corruption?

    - by Paul
    This is one of the nightmare days: A virtualized server running on a Linux SW-RAID1 runs a VM that exhibits random segfaults in seemingly random codechunks. While debugging I find that a file gives different md5sums on each and every run. Digging deeper I find this: The raw disc partitions that make up the RAID1 mirror contain 2 bit-differences and ca. 9 sectors are completely empty on one disc and filled with data on the other disc. Obviously Linux gives back a sector from a undeterministically chosen disc of the mirror set. So sometimes the same sector is returned OK, sometimes the corrupted is given back. The docs say: RAID cannot and is not supposed to guard against data corruption on the media. Therefore, it doesn't make any sense either, to purposely corrupt data (using dd for example) on a disk to see how the RAID system will handle that. It is most likely (unless you corrupt the RAID superblock) that the RAID layer will never find out about the corruption, but your filesystem on the RAID device will be corrupted. Thanks. That will help me sleep. :-/ Is there a way to have Linux at least detect this corruption by using sector checksumming or something like that? Would this be detected in a RAID5 setup? Is this the moment I wish I used ZFS or btrfs (once it becomes usable without uber-admin capabilities)?

    Read the article

  • MSSQL Timing out, a couple of questions...

    - by user29000
    Hi, About once a week, my MSSQL server is timing out, or rather the machine runs out of RAM. This morning it reached 3.9GB of the available 4, with MSSQL taking up 2.5GB. I'm concerned that i've not configured SQL to release memory as it should, so I ran sp_who2 while the timeouts were occuring to see what process were running. If i could post the CSV datafile i would, however, there were 85 processes in total, mostly related to the Full Text service: FT Gatherer - About 35 of these running under the 'sa' account against the master database with status of either sleeping or background, many were dependant on other processes. Is that normal? MySite database - There were only 5 processes for the one active site/database and all were either sleeping or suspended - but their lastBatch dates were set to 1/12/2020. Is that normal? The datbase is only about 20mb in size the traffic levels are very low, so i'm thinking of maybe limiting the amount of RAM SQL has access to (from unlimted to maybe 2GB). Any thoughts / advise would be appreciated. Mny thanks Ben

    Read the article

  • How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

    - by Software Monkey
    I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

    Read the article

  • Installing Numpy locally

    - by Néstor
    I posted this question originally on StackOverflow, but a user suggested I moved it here so here I go! I have an account in a remote computer without root permissions and I needed to install a local version of Python (the remote computer has a version of Python that is incompatible with some codes I have), Numpy and Scipy there. I've been trying to install numpy locally since yesterday, with no success. I successfully installed a local version of Python (2.7.3) in /home/myusername/.local/, so I access to this version of Python by doing /home/myusername/.local/bin/python. I tried two ways of installing Numpy: I downloaded the lastest stable version of Numpy from the official webpage, unpacked it, got into the unpacked folder and did: /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I get the following error, which is followed by a series of other errors (deriving from this one): gcc -pthread -shared build/temp.linux-x86_64-2.7/numpy/core/blasdot/_dotblas.o -L/usr/local/lib -Lbuild/temp.linux-x86_64-2.7 -lptf77blas -lptcblas -latlas -o build/lib.linux-x86_64-2.7/numpy/core/_dotblas.so /usr/bin/ld: /usr/local/lib/libptcblas.a(cblas_dptgemm.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC Not really knowing what this meant (except that the error apparently has to do with the LAPACK library), I just did the same command as above, but now putting LDFLAGS='-fPIC', as suggested by the error i.e., I did LDFLAGS="-fPIC" /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I got the same error (except that the prefix -fPIC was addeded after the gcc command above). I tried installing it using pip, i.e., doing /home/myusername/.local/bin/pip install numpy /after successfully instaling pip in my local path). However, I get the exact same error. I searched on the web, but none of the errors seemed to be similar to mine. My first guess is that this has to do with some piece of code that needs root permissions to be executed, or maybe with some problem with the version of the LAPACK libraries or with gcc (gcc version 4.1.2 is installed on the remote computer). Help, anyone?

    Read the article

  • (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

    - by John B
    I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful.

    Read the article

  • Archive Manager, SQL 2005 and MaxTokenSize high CPU

    - by Tim Alexander
    So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

    Read the article

  • WMI Sensors monitoring

    - by DmitrySemenov
    Monitoring tool Paessler stopped to monitor WMI Windows Sensors Paessler is Updated to version 12.4.5.3165. (10/30/2012 1:44:11 PM) Paessler windows sensors (against windows server 2008 R2 web edition) stopped to work (no changes have been made on server that we monitor) with the message Connection could not be established (80070005: Access is denied - Host: 192.168.2.10, User: Administrator, Password: **, Domain: ntlmdomain:) (code: PE015) However if I go to Virtual machine used to run Paessler and the following cscript runs successfully: strComputer = "192.168.2.10" Set objSWbemLocator = CreateObject("WbemScripting.SWbemLocator") Set objSWbemServices = objSWbemLocator.ConnectServer _ (strComputer, "root\cimv2", _ "Administrator", "pass") Set colProcessList = objSWbemServices.ExecQuery( _ "Select * From Win32_Processor") For Each objProcess in colProcessList Wscript.Echo "Process Name: " & objProcess.Name Next I'm getting output C:\>cscript test.vbs Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz Process Name: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz So WMI works a. I gave Administrator credentials for Device to monitor in Paessler setting, the same I used in the script above b. I restarted windows server (broken sensors) - but this didn't help c. I restarted Paessler probe service - no effect any ideas?

    Read the article

  • Additional Security Measures for Syslog over SSH

    - by Eric
    I'm currently working on setting up some secure syslog connections between a few Fedora servers. This is my currently setup 192.168.56.110 (syslog-server) <---- 192.168.57.110 (syslog-agent) From the agent, I am running this command: ssh -fnNTx -L 1514:127.0.0.1:514 [email protected] This works just fine. I have rsyslog on the syslog-agent pointing to @@127.0.0.1:1514 and it forwards everything to the server correctly on port 514 via the tunnel. My issue is, I want to be able to lock this down. I am going to use ssh keys so this is automated because there will be multiple agents talking to the server. Here are my concerns. Someone getting on the syslog-agent and logging into the server directly. I have taken care of this by ensuring that syslog_user has a shell of /sbin/nologin so that user can't get a shell at all. I don't want someone to be able to tunnel another port over ssh. Ex. - 6666:127.0.0.1:21. I know my first line of defense against this is to just not have anything listening on those ports and it's not an issue. However I want to be able to lock this down somehow. Are there any sshd_config settings on the server that I can use to make it where only port 514 can be tunneled over ssh? Are there any other major security concerns I'm overlooking at this point? Thanks in advance for your help/comments.

    Read the article

  • Windows Server 2008 R2 Finding Hidden files that are causing drive to fill up

    - by Xaxum
    What is the best way to find out what files are sucking up so much space? My Windows directory lists its size as 15 GB but when I run a powershell script against it, it shows 40 GB. It seems 40 GB is about right because if I use that 40 GB and add it to the rest of my folders on C I get the 45 GB that is in use. I checked volume shadow copy and that is disabled and there are no volume shadow files listed. My page file is limited to 3 GB. How can I find out what files are taking 25 GB of space? Final Results: We ended up disabling UAC and then the Properties showed the true file size of the Windows folder, as shown in powershell script. This allowed us to drill down to the folder that had the issues... In our case it was in C:\Windows\System32\config\systemprofile\AppData\Local\VMware\VDM there were several large dump files, these were the mysterious unknown files in WinDirStat. It turns out our nessus scan is crashing a view service for a couple seconds so it creates a large dump file. So we will try this.. https://discussions.nessus.org/thread/5212

    Read the article

  • Automate creation of Windows startup script?

    - by Niten
    Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

    Read the article

  • Best practices for thin-provisioning Linux servers (on VMware)

    - by nbr
    I have a setup of about 20 Linux machines, each with about 30-150 gigabytes of customer data. Probably the size of data will grow significantly faster on some machines than others. These are virtual machines on a VMware vSphere cluster. The disk images are stored on a SAN system. I'm trying to find a solution that would use disk space sparingly, while still allowing for easy growing of individual machines. In theory, I would just create big disks for each machine and use thin provisioning. Each disk would grow as needed. However, it seems that a 500 GB ext3 filesystem with only 50 GB of data and quite a low number of writes still easily grows the disk image to eg. 250 GB over time. Or maybe I'm doing something wrong here? (I was surprised how little I found on the subject with Google. BTW, there's even no thin-provisioning tag on serverfault.com.) Currently I'm planning to create big, thin-provisioned disks - but with a small LVM volume on them. For example: a 100 GB volume on a 500 GB disk. That way I could more easily grow the LVM volume and the filesystem size as needed, even online. Now for the actual question: Are there better ways to do this? (that is, to grow data size as needed without downtime.) Possible solutions include: Using a thin-provisioning friendly filesystem that tries to occupy the same spots over and over again, thus not growing the image size. Finding an easy method of reclaiming free space on the partition (re-thinning?) Something else? A bonus question: If I go with my current plan, would you recommend creating partitions on the disks (pvcreate /dev/sdX1 vs pvcreate /dev/sdX)? I think it's against conventions to use raw disks without partitions, but it would make it a bit easier to grow the disks, if that is ever needed. This is all just a matter of taste, right?

    Read the article

  • How to reject messages to unknown user in sendmail cooperating with MS-Exchange?

    - by user71061
    Hi! I have an MS Exchange 2003 configured as a mail server for an organization. As this server is located in this organization internal network and I don't want to expose it directly over internet, I have second server - linux box with sendmail - configured as intelligent relay (it accept all messages from internet addressed to @my_domain, and forward it to internal Exchange serwer, and accepts all messages from this internal Exchange server and forward it over internet). This configuration work's fine, but I want to eliminate messages addressed to not exiting users as early as possible. Good solution could be Enabling on Exchange server function of filtering recipients together with "tar pitting", but in my case this dosn't solve problem, because before any message reach my Exchange server (which could eventually reject it), it has to be already accepted by sendmail server, sitting in front of this Exchange server. So, I want to configure my sendmail server in such a way, that during initial SMTP conversation it could query somehow my Exchange server checking whether recipient address is valid or not, and based on result of this query, accept or reject (possibly with some delay) incoming message in a very early phase. In fact, I have already solved this issue by writing my own, simple sendmail milter program which checks recipient address against text file with list of valid addresses. But this solution is not satisfying me any longer, because it requires frequent updates of this file, and due to lack of time/motivation/programming skills, I don't want to cope further with my source code, adding to it functionality of querying my Exchange server. Maybe I can achieve desired effect by configuring any component of already available linux software. Any ideas?

    Read the article

  • Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

    - by Nathan Ridley
    I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

    Read the article

  • While loop read multiple lines from a grep

    - by Basil
    I'm writing a script in AIX 5.3 that will loop through the output of a df and check each volume against another config file. If the volume appears in the config file, it will set a flag which is needed later in the script. If my config file only has a single column and I use a for loop, this works perfectly. My problem, however, is that if I use a while read loop to populate more than one variable per line, any variables I set between the while and the done are discarded. For example, assuming the contents of /netapp/conf/ExcludeFile.conf are a bunch of lines containing two fields each: volName="myVolume" utilization=70 thresholdFlag=0 grep volName /netapp/conf/ExcludeFile.conf | while read vol threshold; do if [ $utilization -ge $threshold ] ; then thresholdFlag=1 fi done echo "$thresholdFlag" In this example, thresholdFlag will always be 0, even if the volume appears in the file and its utilization is greater than the threshold. I could have added an echo "setting thresholdFlag to 1" in there, see the echo, and it'll still echo a 0 at the end. Is there a clean way to do this? I think my while loop is being done in a subshell, and changes I make to variables in there are actually being made to local variables that are discarded after the done.

    Read the article

  • How to pin "Visual Studio 2010 Documentation" shortcut to Windows 7 taskbar?

    - by Chris W. Rea
    I just installed Microsoft Visual Studio 2010 at home, on my Windows 7 PC. One of the items installed with VS2010 is "Microsoft Visual Studio 2010 Documentation". I like to have the documentation installed locally and at my fingertips, and so before had always added a shortcut for the help viewer to my Quick Launch toolbar. However, I'm not able to pin the new documentation to the Windows 7 taskbar. It's frustrating. Note carefully: When I launch "Microsoft Visual Studio 2010 Documentation" from the Start menu, it seems to perform two functions: First, it launches the "Help Library Agent", which is a local HTTP server from which the help content is served... similar to the local ASP.NET web development server. Second, it launches the default web browser against the localhost URL corresponding to the port on which the "Help Library Agent" is running, for example: http://127.0.0.1:47873/help/1-1444/ms.help?method=f1&query=msdnstart&product=VS&productVersion=100&locale=en-US ... in other words, the program doesn't leave behind an active foreground process that displays in the taskbar. So, I can't choose "Pin this program to taskbar" as one might do so with a typical program. How can I get a shortcut to "Microsoft Visual Studio 2010 Documentation" in the Windows 7 taskbar? Has anybody got a workaround for this?

    Read the article

  • Collect temperature and fan speed with munin from Windows 7 PC?

    - by nfm
    Hi, I'm quite fond of munin and using it also at home to monitor my PCs. What was super-duper easy under Linux is pretty much unsolvable for me under Windows: I'd like to monitor CPU and Motherboard temperatures as well as fan speed. On Linux I'm using lm-sensors and the plugin for munin was basically there. I access already some information from my Windows machine via SNMP (disk space, CPU usage, memory usage); the graphs are simple as is the information exposed via SNMP, but they do their job. But when it comes to temperature and fan speed I'm running against a wall. My research so far resulted in that Windows does not by default provide out of the box ability to retrieve temperature/fan speed data. Third party applications are necessary which have know-how how to communicate with the Motherboard chips. The best I cam up with is that SpeedFan exposes a shared memory interface and there exists a library which hooks into Windows SNMP facility and bridges over to SpeedFans shared memory interface; it's called SFSNMP (site currently down). Unfortunately the library doesn't work, there's a bug report at SpeedFan open about it, but it's currently not moving (although the SFSNMP author is active there) . So, unless that's going to work like anytime soon, are there any alternatives? I'm not found of buying any software to get that feature, given that I take it as granted that my system exposes me the information to properly monitor it, but anyway don't just not answer because of this.

    Read the article

  • IIS7 default document for urlMapped url throws 403 error

    - by MorningZ
    Hopefully this all makes sense: I have a Web Application project against an IIS7 server that is "theme-able" using different master pages. As a result of what I am trying to do, the root of the project has no aspx files, so I am using the web.config's ability to rewrite "~/default.aspx" to "~/themes/a/default.aspx" this works great as long as i type in "http://www.mysite.com/default.aspx", but typing just "http://www.mysite.com" results in a "403 - Forbidden: Access is denied" error I was hoping that the combination of urlMapping and default document would be smart enough to handle this, but it's not <system.webServer> <defaultDocument enabled="true"> <files> <clear /> <add value="default.aspx"/> </files> </defaultDocument> </system.webServer> i also tried <system.webServer> <defaultDocument enabled="true"> <files> <clear /> <add value="~/themes/a/default.aspx"/> </files> </defaultDocument> </system.webServer> to no avail I was hoping a browser would come in without a document defined, IIS7 would assume it was default.aspx, and then the urlMapping would map it accordingly, but nope any pointers? I've read a ton of posts here with similar issues, but not the exact issue

    Read the article

  • Alfa AWUSO36H 1W dysfunctional driver

    - by BrainStorm
    I recently purchased an Alfa AWUSO36H 1W wireless USB adapter for my notebook, in order to improve signal strength and quality. I'm currently using Linux Mint 11, and the it uses the RTL8187 driver for this adapter, I'm also using a 4dbi antenna, though I have others. The problem is that this adapter does exactly the opposite of what it should, actually my internal Broadcom BCM4313 adapter works way better than the alfa. Browsing is slow, some network applications don't even work, pings against Google.com on the internal adapter runs smooth, while in the alfa it gets like 25% packets lost or more! I'm less them 50 feet from my AP, the internal adapter gets 44/70 link quality, and the alfa gets around 60/70 (iwconfig output). Also the system always sets alfa power to 20dbm(100mw), then I have to do sudo iw set reg B0 to make it 30dbm(1000mw), but apparently no significant change. I've installed wireless-compat drivers, no change either. And worst of all, in Windows 7 it works way more smoothly for browsing, though I couldn't test it properly there. I hope its a driver problem, even if it's a pain to find/compile Linux drivers for a starter, I prefer it to a hardware problem where I would need to buy another adapter, since I have no money left (except for the cantenna pieces).

    Read the article

  • SQL Server 2005 SE SP3 on Windows Server 2008 R2 x64 premature query disconnections

    - by southernpost
    New Dell PowerEdge R910, 4x8 Intel X7560, 192GB RAM, hardware NUMA, local RAID, Broadcom NetExtreme II multiport NIC, unteamed, TCP Offload disabled, RSS disabled, NetDMA disabled, Hyperthreading disabled. SQL Server 2005 SE x64 SP3 on Windows Server 2008 R2 EE x64. No other apps on server. Max Mem = 180GB, Max DOP = 4. Existing Windows Server 2003 R2 EE x64 app server connecting to Dell via firewall using SQL Authenticated logins. Symptoms: Intermittent errors at the app server: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) Findings: Running queries from SSMS located on another machine within the same domain as the SQL Server run without error. SQLIO showed good performance. Windows and SQL logs show no related messages. Microsoft reveiwed PssDiag trace and stated that "We are not seeing timeouts from SQL Side. The queries bring run against the database are timing out within 9secs. This is a database connectivity error." "we can also see from the AttnSeq column that we are also not seeing any Attentions from the SQL Side.". Dell has confirmed that we are using the latest Broadcom drivers.

    Read the article

  • GNU screen, how to get current sessionname programmatically

    - by Jimm Chen
    [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

    Read the article

  • What is the best private cloud storage setup

    - by vdrmrt
    I need to create a private cloud and I'm searching for the best setup. These are my 2 most important requirements 1. Disk and system redundant 2. Price / GB as low as possible The system is going to be used as backup setup which will receive data 24/7 over SFTP and rsync. High throughput is not that important. I'm planning to use glusterfs and consumer grade 4TB hard-drives. I have worked out 3 possible setups 3 servers with 11 4TB HDD Setup up a replica 3 glusterfs and setup each hard drive as a separate ext4 brick. Total capacity: 44TB HDD / TB ratio of 0.75 (33HDD / 44TB) 2 servers with 11 4TB HDD The 11 hard-drives are combined in a RAIDZ3 ZFS storage pool. With a replica 2 gluster setup. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) 3 servers with 11 4TB consumer hard-drives Setup up a replica 3 glusterfs and setup each hard-drive as a separate zfs storage pool and export each pool as a brick. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) (Cheapest) My remarks and concerns: If a hard drive fails which setup will recover the quickest? In my opinion setup 1 and 3 because there only the contents of 1 hard-drive needs to be copied over the network. Instead of setup 2 were the hard-drive needs te be reconstructed by reading the parity of all the other harddrives in the system. Will a zfs pool on 1 harddrive give me extra protection against for example bit rot? With setup 1 and 3 I can loose 2 systems and still be up and running with setup 2 I can only loose 1 system. When I use ZFS I can enable compression which will give me some extra storage.

    Read the article

  • IIS not responding with SSL Server Hello

    - by Damien_The_Unbeliever
    I'm having difficulty getting a particular IIS machine to "do" SSL. This is a test environment (one of many) which we've set up "the same" as we have many times previously, but it just doesn't seem to be working. The server is Windows Server 2003 (Version 5.2 (Build 3790.srv03_sp2_gdr.100216-1301 : Service Pack 2)) IIS is hosting 4 sites (including the default site), but only one site is configured for SSL. We're using the same SSL certificate we use on all of our other servers (it's a wildcard cert). (Don't think this is relevant, but including anyway) We've configured the site to require SSL, it has a subdirectory that doesn't require SSL but has an asp page that redirects into SSL. The 403;4 error page for the site is hooked up to this asp page (this is how we do our non-HTTPS into HTTPS transition). Using Microsoft Network Monitor (3.3), I've just run a session against a server where SSL is working. It can pull apart the SSL exchange as the following messages: SSL: Client Hello SSL: Server Hello. Certificate. Server Hello Done SSL: Client Key Exchange. Change Cipher Spec. Encrypted Handshake Message. SSL: Change Cipher Spec. Encrypted Handshake Message However, on our problem server, I only see: SSL: Client Hello. The next packet from the server (from port 443, so it's listening and responding there) contains only 60 bytes, and just seems to have the Tcp headers and not much else (but I'm by no means an expert at deciphering these things). So, where do I look next? Or what additional information do I need to add to this question, and where do I find it?

    Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >