Search Results

Search found 4731 results on 190 pages for 'stuck'.

Page 166/190 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• No Telnet login prompt when used over SSH tunnel

  - by SCO

  Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

  Read the article

• How to get more information from the system crash

  - by viraptor

  I'd like to debug an issue I'm having with a linux (debian stable) server, but I'm running out of ideas of how to confirm any diagnosis. Some background: The servers are running DL160 class with hardware raid between two disks. They're running a lot of services, mostly utilising network interface and CPU. There are 8 cpus and 7 "main" most cpu-hungry processes are bound to one core each via cpu affinity. Other random background scripts are not forced anywhere. The filesystem is writing ~1.5k blocks/s the whole time (goes up above 2k/s in peak times). Normal CPU usage for those servers is ~60% on 7 cores and some minimal usage on the last (whatever's running on shells usually). What actually happens is that the "main" services start using 100% CPU at some point, mainly stuck in kernel time. After a couple of seconds, LA goes over 400 and we lose any way to connect to the box (KVM is on it's way, but not there yet). Sometimes we see a kernel reporting hung task (but not always): [118951.272884] INFO: task zsh:15911 blocked for more than 120 seconds. [118951.272955] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [118951.273037] zsh D 0000000000000000 0 15911 1 [118951.273093] ffff8101898c3c48 0000000000000046 0000000000000000 ffffffffa0155e0a [118951.273183] ffff8101a753a080 ffff81021f1c5570 ffff8101a753a308 000000051f0fd740 [118951.273274] 0000000000000246 0000000000000000 00000000ffffffbd 0000000000000001 [118951.273335] Call Trace: [118951.273424] [<ffffffffa0155e0a>] :ext3:__ext3_journal_dirty_metadata+0x1e/0x46 [118951.273510] [<ffffffff804294f6>] schedule_timeout+0x1e/0xad [118951.273563] [<ffffffff8027577c>] __pagevec_free+0x21/0x2e [118951.273613] [<ffffffff80428b0b>] wait_for_common+0xcf/0x13a [118951.273692] [<ffffffff8022c168>] default_wake_function+0x0/0xe .... This would point at raid / disk failure, however sometimes the tasks are hung on kernel's gettsc which would indicate some general weird hardware behaviour. It's also running mysql (almost read-only, 99% cache hit), which seems to spawn a lot more threads during the system problems. During the day it does ~200kq/s (selects) and ~10q/s (writes). The host is never running out of memory or swapping, no oom reports are spotted. We've got many boxes with similar/same hardware and they all seem to behave that way, but I'm not sure which part fails, so it's probably not a good idea to just grab something more powerful and hope the problem goes away. Applications themselves don't really report anything wrong when they're running. I can run anything safely on the same hardware in an isolated environment. What can I do to narrow down the problem? Where else should I look for explanation?

  Read the article

• "Error 1067: The process terminated unexpectedly" when trying to install MySQL on Win7 x64.

  - by Gravitas

  Hi, I've run into a brick wall trying to install MySQL v5.5 on my machine. My PC is Windows 7 x64, Enterprise edition. MySQL installs fine, but when I run the "MySQL Instance Configuration Wizard", it pauses forever on the step "Start Service" (I can let it run for 30 minutes with no response). If I go into services, I see that the "MySQL" service hasn't started, and if I try to start it, it says "Windows could not start MySQL Service on Local Computer. Error 1067: The process terminated unexpectedly." I've tried the following: Turning off firewall. Uninstalling all antivirus software. Installing / reinstalling 32-bit version of MySQL. Installing / reinstalling 64-bit version of MySQL. Uninstalling, deleting the contents of "C:\program files\MySQL" and "C:\program files (x86)\MySQL", reinstalling. Checking to see that there is no rogue services named MySQL???? (from a previous install). Checking that port 3306 is not used by an alternate program. Changing the default port that MySQL uses. Checking for "my.ini" and "my.ini.cnf" in "C:\windows" (nothing there but that can cause a problem). Running both MySQL installer, and configuration wizard, in "Adminstrator mode". Turning off UAC. Installing with defaults, not changing anything. Rebooting my machine (about 6 reboots so far). Opening up port 3306 in the firewall (both TCP and UDP, inbound and outbound). Swearing at the klutz of a programmer who designed MySQL so you can't even install it (as if that would help!) My machine is working 100% in every other way. InfiniDB (a MySQL compatible database) installs 100%, as does Visual Studio 2010, Microsoft SQL Server, etc, etc. Your advice on how to work around this? p.s. Here is the screen it got stuck on for 15 minutes until I killed the process: Update 2010-12-20 Tried MySQL v5.1, it didn't work either. Its amazing - if you type "mysqld /?", or "mysqld -help", it doesn't give you any help. And, if you try to restart the service manually, it doesn't display any error messages. Could it be any more unhelpful? Update 2010-12-21 Installed MySQL 6.0 alpha, and it worked. However, I'd rather not use an alpha release, given that the "stable" release is anything but :( Update 2010-12-21 Found http://dev.mysql.com/doc/refman/5.1/en/windows-troubleshooting.html, dealing with troubleshooting under Windows. Discovered that you can generate an error log if the service doesn't start - see here: http://dev.mysql.com/doc/refman/5.1/en/error-log.html

  Read the article

• How do I permanently delete e-mail messages in the sendmail queue and keep them from coming back?

  - by Steven Oxley

  I have a pretty annoying problem here. I have been testing an application and have created some test e-mails to bogus e-mail addresses (not to mention that my server isn't really set up to send e-mail anyway). Of course, sendmail is not able to send these messages and they have been getting stuck in the sendmail queue. I want to manually delete the messages that have been building up in the queue instead of waiting the 5 days that sendmail usually takes to stop retrying. I am using Ubuntu 10.04 and /var/spool/mqueue/ is the directory in which every how-to I have read says the e-mails that are queued up are kept. When I delete the files in this directory, sendmail stops trying to process the e-mails until what appears to be a cron script runs and re-populates this directory with the messages I don't want sent. Here are some lines from my syslog: Jun 2 17:35:19 sajo-laptop sm-mta[9367]: o530SlbK009365: to=, ctladdr= (33/33), delay=00:06:27, xdelay=00:06:22, mailer=esmtp, pri=120418, relay=e.mx.mail.yahoo.com. [67.195.168.230], dsn=4.0.0, stat=Deferred: Connection timed out with e.mx.mail.yahoo.com. Jun 2 17:35:48 sajo-laptop sm-mta[9149]: o4VHn3cw003597: to=, ctladdr= (33/33), delay=2+06:46:45, xdelay=00:34:12, mailer=esmtp, pri=3540649, relay=mx2.hotmail.com. [65.54.188.94], dsn=4.0.0, stat=Deferred: Connection timed out with mx2.hotmail.com. Jun 2 17:39:02 sajo-laptop CRON[9510]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) Jun 2 17:39:43 sajo-laptop sm-mta[9372]: o52LHK4s007585: to=, ctladdr= (33/33), delay=03:22:18, xdelay=00:06:28, mailer=esmtp, pri=1470404, relay=c.mx.mail.yahoo.com. [206.190.54.127], dsn=4.0.0, stat=Deferred: Connection timed out with c.mx.mail.yahoo.com. Jun 2 17:39:50 sajo-laptop sm-mta[9149]: o51I8ieV004377: to=, ctladdr= (33/33), delay=1+06:31:06, xdelay=00:03:57, mailer=esmtp, pri=6601668, relay=alt4.gmail-smtp-in.l.google.com. [74.125.79.114], dsn=4.0.0, stat=Deferred: Connection timed out with alt4.gmail-smtp-in.l.google.com. Jun 2 17:40:01 sajo-laptop CRON[9523]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Does anyone know how I can get rid of these messages permanently? As a side note, I'd also like to know if there is a way to set up sendmail to "fake" sending e-mail. Is there?

  Read the article

• Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

  - by user26453

  I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

  Read the article

• Routing RFC1918 addresses through dd-wrt via a switch

  - by espenfjo

  I am a bit stuck with an experiment of mine. I have a network looking somewhat like this. | Internet | | ---- |Switch| ---- | | Server w/pub IP | DD-WRT router 192.168.1.1 | | RFC1918 clients 192.168.1.0/24 What I want is for the RFC1918 clients to speak directly with each others. On the server with the public IP I have this route: 192.168.1.0/24 dev eth0 scope link and can see that packets are infact reaching the dd-wrt router for 192.168.1.1, even though if I get no answer. Trying to reach one of the RFC1918 clients from the public IP server will get no result, as the dd-wrt router is not announcing that network on to its external interface (arp who-has 192.168.1.107 tell xxx.xxx.xxx.xxx, but no answer). The router being an WLAN dd-wrt router has of course a load of routes, VLANs and interfaces: xxx.xxx.xxx.1 dev vlan2 scope link 192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.244 84.215.64.0/18 dev vlan2 proto kernel scope link src xxx.xxx.xxx.xxx 169.254.0.0/16 dev br0 proto kernel scope link src 169.254.255.1 127.0.0.0/8 dev lo scope link 0.0.0.0 via xxx.xxx.xxx.1 dev vlan2 xxx.xxx.xxx.xxx being the public IP, and xxx.xxx.xxx.1 being the default route for the public IP. I am not sure where to continue with this. I would recon that I both need routing on the dd-wrt router, as well as some iptables magic? Why do something this complex? Why not ;) Also, do not mind that "Internet" can get RFC1918 traffic, it wont go outside of the walls. EDIT 1: Following the tip from stew I do indeed get the correct ARP flowing. And adding an iptables rule for allowing traffic from that specific public IPd machine I get traffic between the systems! Oddly enough though, the speed I get from Server w/pub IP - RFC1918 clients are the same as if the traffic were routed out onto the Internet and back. Edit 2: Ok, disconnecting the external Internet connection will still give the same, crappy transfer speed. So it has to be something else. Edit 3: Ok, I guess there are other reasons for this crappy speed. Case closed. :)

  Read the article

• Hell: NTFS "Restore previous versions"...

  - by ttsiodras

  The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

  Read the article

• load-causing processes disappearing from "top" ps -o pcpu shows bogus numbers

  - by Alec Matusis

  I administer a large number of servers, and I have this problem only with Ubuntu 10.04 LTS: I run a server under normal load (say load average 3.0 on an 8-core server). The "top" command shows processes taking certain % of CPU that cause this load average: say PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11008 mysql 20 0 25.9g 22g 5496 S 67 76.0 643539:38 mysqld ps -o pcpu,pid -p11008 %CPU PID 53.1 11008 , everything is consistent. The all of the sudden, the process causing the load average disappears from "top", but the process continues to run normally (albeit with a slight performance decrease), and the system load average becomes somewhat higher. The output of ps -o pcpu becomes bogus: # ps -o pcpu,pid -p11008 %CPU PID 317910278 1587 This happened to at least 5 different severs (different brand new IBM System X hardware), each running different software: one httpd 2.2, one mysqld 5.1, and one Twisted Python TCP servers. Each time the kernel was between 2.6.32-32-server and 2.6.32-40-server. I updated some machines to 2.6.32-41-server, and it has not happened on those yet, but the bug is rare (once every 60 days or so). This is from an affected machine: top - 10:39:06 up 73 days, 17:57, 3 users, load average: 6.62, 5.60, 5.34 Tasks: 207 total, 2 running, 205 sleeping, 0 stopped, 0 zombie Cpu(s): 11.4%us, 18.0%sy, 0.0%ni, 66.3%id, 4.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 74341464k total, 71985004k used, 2356460k free, 236456k buffers Swap: 3906552k total, 328k used, 3906224k free, 24838212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 805 root 20 0 0 0 0 S 3 0.0 1493:09 fct0-worker 982 root 20 0 0 0 0 S 1 0.0 111:35.05 fioa-data-groom 914 root 20 0 0 0 0 S 0 0.0 884:42.71 fct1-worker 1068 root 20 0 19364 1496 1060 R 0 0.0 0:00.02 top Nothing causing high load is showing on top, but I have two highly loaded mysqld instances on it, that suddenly show crazy %CPU: #ps -o pcpu,pid,cmd -p1587 %CPU PID CMD 317713124 1587 /nail/encap/mysql-5.1.60/libexec/mysqld and #ps -o pcpu,pid,cmd -p1624 %CPU PID CMD 2802 1624 /nail/encap/mysql-5.1.60/libexec/mysqld Here are the numbers from # cat /proc/1587/stat 1587 (mysqld) S 1212 1088 1088 0 -1 4202752 14307313 0 162 0 85773299069 4611685932654088833 0 0 20 0 52 0 3549 27255418880 5483524 18446744073709551615 4194304 11111617 140733749236976 140733749235984 8858659 0 552967 4102 26345 18446744073709551615 0 0 17 5 0 0 0 0 0 the 14th and 15th numbers according to man proc are supposed to be utime %lu Amount of time that this process has been scheduled in user mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). This includes guest time, guest_time (time spent running a virtual CPU, see below), so that applications that are not aware of the guest time field do not lose that time from their calculations. stime %lu Amount of time that this process has been scheduled in kernel mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). On a normal server, these numbers are advancing, every time I check the /proc/PID/stat. On a buggy server, these numbers are stuck at a ridiculously high value like 4611685932654088833, and it's not changing. Has anyone encountered this bug?

  Read the article

• serving mp3s to mobile devices is flooding nginx with partial requests

  - by drumfire

  I am serving mp3s with a minimalistic nginx server. What I see in my log files is that there are a lot of requests, in particular from AppleCoreMedia and sometimes Android useragents, that flood the server with short requests. Sometimes they keep requesting to download the same partial content for a very long time; sometimes more than an hour. For example: "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" "GET /somefile.mp3 HTTP/1.1" 206 33041 "AppleCoreMedia/1.0.0.9B206 (iPhone; U; CPU OS 5_1_1 like Mac OS X; en_us)" [...] I also get a lot, but not as much, of these: "-" 400 0 "-" "-" 400 0 "-" The IP addresses are always from clients that start downloading shortly after that request, usually they have roughly the same UserAgent as in the first example. emphasized text I have enabled server throttling and connection limits in nginx to limit the huge amount of log entries from equivalent IPs at least somewhat. There was a performance issue when I saw the same behaviour on the previous server that used Apache. I installed nginx on a better server then moved the site. When Apache could not handle more connections from the increasing number of clients effectively that server was ddossed. There was no bandwidth issue with already connected clients and I don't know if the already connected clients were using more than one connection at a time. Please tell me: Are clients that appear to get stuck on a download a Bad Thing™ I heard people say their mobile bandwidth use was much higher than they could account for. I'm thinking this type of client behaviour can account for that. And costs us more bandwidth too. Which up to date alternatives exist out there that can handle serving this type of data better than plain HTTP? Useful general insights for someone who just came into this field straight out of the late 90s. :-)

  Read the article

• Rsync over ssh: "ERROR: module is read only" suddenly appeared

  - by user978548

  I've used from some time rsync/ssh to backup my shared host contents to my personal Synology NAS (212j for that matter), and it worked quite well. For information, I use a password-less ssh connection. 3 days ago, I updated my NAS software and since (or at least I believe it's since that), the backup won't work anymore. I get the following error on the host: rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) ERROR: module is read only ..which I do not understand. beside that nothing changed that I know of in both source and destination that can be related to rsync or ssh, I did check a few things and all seems to be alright: I can still connect through ssh from the host to my NAS with the good user, so ssh stuff like keys haven't changed. I also have the correct file permissions on the NAS (I checked, and also tried to create files, directories, .. with the user used by rsync through ssh). I read here and there that the error means that I have to ensure that my rsyncd.conf have the right read only = no in it, but as far as I know, I never used rsyncd as well as I never configured anything for it and until now it worked like a charm.. I use the following command to do the backup: rsync -ab --recursive \ --files-from="$FILES_FROM" \ --backup-dir=backup_$SUFFIX \ --delete \ --filter='protect backup_*' \ $WDIRECTORY/ \ remote_backup:$REMOTE_BACKUP/ So I'm stuck and really can't figure out what happened. Edit: As suggested in comments, I also tried passing commands to ssh (but not from inside a ssh session), that worked as expected, and also tried a single rsync command, which didnt worked, failing just like the complete backup command. (sharedHost):hostuser:~ > touch test.txt (sharedHost):hostuser:~ > rsync test.txt remote_backup:backups/test.txt ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.8] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7] and (sharedHost):hostuser:~ > ssh remote_backup 'touch /abs_path_to_backups/backups/test2.txt && echo "ProoF" > /abs_path_to_backups/backups/test2.txt' (sharedHost):hostuser:~ > ssh remote_backup 'cat /abs_path_to_backups/backups/test2.txt' ProoF

  Read the article

• batch file infinite loop when parsing file

  - by Bart

  Okay, this should be a really simple task but its proving to be more complicated than I think it should be. I'm clearly doing something wrong, and would like someone else's input. What I would like to do is parse through a file containing paths to directories and set permissions on those directories. An example line of the input file. There are several lines, all formatted the same way, with a different path to a directory. E:\stuff\Things\something else (X)\ (The file in question is generated under Cygwin using find to list all directories with "(X)" in the name. The file is then passed through unix2win to make it windows compatible. I've also tried manually creating the input file from within windows to rule out the file's creation method as the problem.) Here's where I'm stuck... I wrote the following quick and dirty batch file in Windows XP and it worked without any issues at all, but it will not work in server 2k8. Batch file code to run through the file and set permissions: FOR /F "tokens=*" %%A IN (dirlist.txt) DO echo y| cacls "%%A" /T /C /G "Domain Admins":f "Some Group":f "some-security-group":f What this is SUPPOSED to do (and does in XP) is loop through the specified file (dirlist.txt) and run cacls.exe on each directory it pulls from the file. The "echo y|" is in there to automagically confirm when cacls helpfully asks "are you sure?" for every directory in the list. Unfortunately, however, what it DOES is fall into an infinite loop. I've tried surrounding everything after "DO" with quotes, which prevents the endless loop but confuses cacls so it throws an error. Interestingly, I've tried running the code from after "DO" manually (obviously replacing the variable with the full path, copied straight from the file) at a command prompt and it runs as expected. I don't think it's the file or the loop, as adding quotes to the command to be executed prevents the loop from continuing past where it's supposed to... I really have no idea at this point. Any help would be appreciated. I have a feeling it's going to be something increadibly stupid... but I'm pulling my hair out so I thought I'd ask.

  Read the article

• How to conform to update-rc.d with LSB standard?

  - by user34881

  This is a migrated question from stackoverflow, as I was told, this is the place for it to be. http://stackoverflow.com/questions/2263567/how-to-conform-to-update-rc-d-with-lsb-standard I have set up a simple script to back up some directories. While I haven't had any problems setting up the functionality, I'm stuck with adding the script to rcX.d dir's using update-rc.d. My script: #! /bin/sh ### BEGIN INIT INFO # Provides: backup # Required-Start: backup # Required-Stop: # Should-Stop: # Default-Start: 0 6 # Default-Stop: # Description: Backs up some dirs ### END INIT INFO check_mounted() { # Check if HD is mounted } do_backup() { if check_mounted; then # Some rsync statements. fi } case "$1" in start) do_backup ;; restart|reload|force-reload) echo "Error: argument '$1' not supported" >&2 exit 3 ;; stop|"") # No-op ;; *) echo "Usage: backup [start]" >&2 exit 3 ;; esac : Using update-rc.d backup start 10 0 6 . I get the following warnings and errors: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6.) do not match LSB Default-Stop values (none) update-rc.d: error: start|stop arguments not terminated by "." The syntax I try to use is the following: update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] . Google wasn't that helpful at finding a solution. How can I correctly set up a script and add it via update-rc.d? I'm using Ubuntu 9.10. UPDATE Using update-rc.d backup start 10 0 6 . stop 10 0 . the error disappears. The warnings about default values persists: update-rc.d: warning: backup start runlevel arguments (none) do not match LSB Default-Start values (0 6) update-rc.d: warning: backup stop runlevel arguments (0 6 0 6) do not match LSB Default-Stop values (none) It even is added to the appropiate rcX-dirs but it still does not get executed...

  Read the article

• Apache won't follow Symlink

  - by Marvin Dickhaus

  I have a LAMP server (Ubuntu 12.10) setup on my development machine. It is a T60 modified with an SSD. The server base is in /var/www. Apache has the following config: DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews SymLinksIfOwnerMatch AllowOverride all Order allow,deny allow from all </Directory> I'm currently developing a SilverStripe CMS featured site. The folder for the server is /var/www/sfk/. The framework and all cms relavant features are in their respective folders. The only folder that need to be modified would be the /var/www/sfk/mysite folder. Because of that I want to keep the mysite folder under my home directory and symlink it into the server folder. So here is what I've done: ln -s ~/sfk/mysite/ /var/www/sfk/ sudo chgrp www-data /var/www/sfk/mysite -R ls tells me the following: /var/www/sfk (exerpt) drwxr-xr-x 3 marvin www-data 4096 Nov 16 16:53 assets drwxr-xr-x 12 marvin www-data 4096 Nov 16 16:53 cms drwxr-xr-x 29 marvin www-data 4096 Nov 16 16:53 framework -rw-r--r-- 1 marvin www-data 2410 Nov 16 16:53 index.php lrwxrwxrwx 1 marvin www-data 24 Nov 20 17:45 mysite -> /home/marvin/sfk/mysite/ -rw-rw-r-- 1 marvin www-data 514 Nov 16 16:55 _ss_environment.php drwxr-xr-x 4 marvin www-data 4096 Nov 16 16:53 themes and ls /var/www/sfk/mysite/ drwxrwxr-x 6 marvin www-data 4096 Nov 16 00:15 code drwxrwxr-x 2 marvin www-data 4096 Nov 16 11:51 _config -rwxrwxr-x 1 marvin www-data 2685 Nov 16 15:39 _config.php drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 css drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 images drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 javascript drwxrwxr-x 5 marvin www-data 4096 Nov 16 00:15 templates This is literally the same setup I have on my desktop machine. The problem I have is that the mysite/ folder is just not recognized. I'm thankful for every advice I get. I'm frustrated because I'm stuck with this issue for hours.

  Read the article

• Nginx + Wordpress Multisite 3.4.2 + subdirectories + static pages and permalinks

  - by UrkoM

  I am trying to setup Wordpress Multisite, using subdirectories, with Nginx, php5-fpm, APC, and Batcache. As many other people, I am getting stuck in the rewrite rules for permalinks. I have followed these two guides, which seem to be as official as you can get: http://evansolomon.me/notes/faster-wordpress-multisite-nginx-batcache/ http://codex.wordpress.org/Nginx#WordPress_Multisite_Subdirectory_rules It is partially working: http://blog.ssis.edu.vn works. http://blog.ssis.edu.vn/umasse/ works. But other permalinks, like these two to a post or to a static page, don't work: http://blog.ssis.edu.vn/umasse/2008/12/12/hello-world-2/ http://blog.ssis.edu.vn/umasse/sample-page/ They either take you to a 404 error, or to some other blog! Here is my configuration: server { listen 80 default_server; server_name blog.ssis.edu.vn; root /var/www; access_log /var/log/nginx/blog-access.log; error_log /var/log/nginx/blog-error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Add trailing slash to */username requests rewrite ^/[_0-9a-zA-Z-]+$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { # Forbid PHP on upload dirs if ($uri ~ "uploads") { return 403; } client_max_body_size 25M; try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Any ideas are welcome! Have I done something wrong? I have disabled Batcache to see if it makes any difference, but still no go.

  Read the article

• SQL Server database filled the hard drive and freeing up space isn't possible

  - by Jon

  I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

  Read the article

• How to configure DD-WRT routing table when creating an isolated network segment for PCI C VT compliance

  - by tetranz

  I'm the volunteer support and system admin person at a small private school. We need to setup a PCI compliant Windows PC as a virtual terminal for credit card processing. I've read questionnaire SAQ C-VT and, to quote, this computer needs to be accessed: "via a computer that is isolated in a single location, and is not connected to other locations or systems within your environment (this can be achieved via a firewall or network segmentation to isolate the computer from other systems)" Our setup is as follows: DSL modem from ISP is setup to be a "transparent pipe" with no extra services. That goes into the WAN port of Linksys WRT54-GL running a DD-WRT. The LAN is 192.168.1.x. There are a couple of other WRT54-GL / DD-WRT devices. One is used as a wireless AP and another is a client bridge. To isolate the VT (virtual terminal) machine, I have another DD-WRT device. Its WAN is connected to a port on the 192.168.1.x LAN. The virtual terminal machine is connected to its LAN which is at 192.168.10.x. The SPI Firewall etc is turned on. It's basically the default DD-WRT gateway setup where the "ISP" is our own LAN. That's working. All incoming traffic to the VT machine is blocked, including from our own LAN. The VT can access the internet BUT, and here's the problem, it can also ping any of the computers on the 192.168.1.x LAN. I think I need to stop that. I'm guessing that I could do something with the Static Routing table in the VT machine's DD-WRT device. I need to route anything going to 192.168.1.x other than the gateway which is 192.168.1.1 to 0.0.0.0 or something like that. That's where I'm stuck at the end of my knowledge. Or ... do I need to get yet another DD-WRT so the network is "balanced". Maybe I need to have the internet from the DSL going into a DD-WRT which has only two devices on its LAN i.e., two other DD-WRTs, one for the main LAN and one for the VT. I think that would do but I'd like to avoid the extra cost and complexity if I don't need it. Thanks

  Read the article

• Spotlight Infinite Indexing issue (external data drive)

  - by Manca Weeks

  This is an external drive, formerly a boot drive which is now in use only to access music files (sibelius, audio, midi, live, logic etc.) without transferring the data into a new boot system, partly because of the issue I am about to describe, but mostly because the majority of the data is mainly there for archival purposes. The user is a composer and prominent musician and needs to be able to rehash the data at will. I have tried several things - here is a list: - make complete filesystem clone with antonio diaz's ddrescue - run Disk Warrior on copy, repair whatever errors occurred - wipe out all ACLs on entire drive - set all permissions to the same value - wide open 777 - remove any system data (applications, system files, including hidden files to the best of my knowledge) by selecting only non-system/app data and using Carbon Copy Cloner to put only the data of interest onto a newly formatted drive - transfer data to newly formatted drive folder by folder, resetting the spotlight index in between adding each to observe for issues (interesting here is that no issues occurred except for in Documents folder - when I transferred only the Documents folder to a newly formatted drive on its own - no trouble. It appears almost as thought it may not be the content but the quantity or specific combination of data that results in problems) - use DataRescue to transfer the data to yet another newly formatted drive to expose any missed hidden files Between each of the above steps I stopped Spotlight (search for anything beginning with md in Activity Monitor - All Processes and quitting it), deleted the .Spotlight-V100 directory from the affected drive. Restart Splotlight indexing by adding drive to Spotlight privacy list and removing it. In each case the same issue occurs - Spotlight begins indexing normally (or so it seems), then the index estimated time increases, usually to 4 hours remaining. This is where it gets stuck and continues to predict 4 hours remaining but never finishes. Sometimes I can't eject the drive and have to quit the md.. processes from Activity Monitor to be able to eject the drive without Force Eject. Once I disconnect the drive after the 4 hours remaining situation - if I reattach it, Spotlight forever estimates remaining time and never gets going again. So there it is. It is apparently not a filesystem issue, not a permissions issue and not tied to any particular piece of hardware or protocol (used USB and FW drives). I have tried this on several machines (3 to be precise) and in 10.5.8 and 10.6.5. Simply disabling Spotlight on this volume is not an option because the owner has no clue where things are as the data on the volume dates back to music projects and compositions from 2003 and before. He needs to be able to query for results. Anyone got any ideas? Thanks, M

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• Why is domU faster than dom0 on IO?

  - by Paco

  I have installed debian 7 on a physical machine. This is the configuration of the machine: 3 hard drives using RAID 5 Strip element size: 1M Read policy: Adaptive read ahead Write policy: Write Through /boot 200 MB ext2 / 15 GB ext3 SWAP 10GB LVM rest (~500GB) emphasized text I installed postgresql, created a big database (over 1GB). I have an SQL request that takes a lot of time to run (a SELECT statement, so it only reads data from the database). This request takes approximately 5.5 seconds to run. Then, I installed XEN, created a domU, with another debian distro. On this OS, I also installed postgresql, with the same database. The same SQL request takes only 2.5 seconds to run. I checked the kernel on both dom0 and domU. uname-a returns "Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux" on both systems. I checked the kernel parameters, which are approximately the same. For those that are relevant, I changed their values to make them match on both systems using sysctl. I saw no changes (the requests still take the same amount of time). After this, I checked the file systems. I used ext3 on domU. Still no changes. I installed hdparm, and ran hdparm -Tt on both systems, on all my partitions on both systems, and I get similar results. Now, I am stuck, I don't know what is different, and what could be the cause of such a big difference. Additional Info: Debian runs on a Dell server PowerEdge 2950 postgresql: 9.1.9 (both dom0 and domU) xen-linux-system: 3.2.0 xen-hypervisor: 4.1 Thanks EDIT: As Krzysztof Ksiezyk suggested, it might be due to some file caching system. I ran the dd command to test both the read and write speed. Here is domU: root@test1:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 18.8289 s, 107 MB/s root@test1:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 15.0549 s, 134 MB/s And here is dom0: root@debian:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 8.87281 s, 191 MB/s root@debian:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 0.501509 s, 3.4 GB/s What can be the cause of this caching system? And how can we "fix" it? Can we apply it to dom0? EDIT 2: I switched my virtual disk type. To do so I followed this article. I did a dd if=/dev/vg0/test1-disk of=/mnt/test1-disk.img bs=16M Then in /etc/xen/test1.cfg, I changed the disk parameter to use file: instead of phy: it should have removed the file caching, but I still get the same numbers (domU being much faster for Postgres)

  Read the article

• Ubuntu 11.10 firewall/gateway - no client internet access

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• SIGINT and SIGTSTP ignored by most common applications

  - by Vašek Potocek

  After the last upgrade to my Fedora, a strange behaviour started occurring in X terminal applications. I can't seem to stop any process using Ctrl+C, it just results in printing ^C to the console. Similarly, Ctrl+Z prints ^Z and the process goes on. Both work well in non-graphical virtual consoles. I checked stty -a and it seems perfectly normal: speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke This is independent of the terminal (gnome-terminal, XFCE4 terminal, xterm). I later noticed that it may not be caused by the terminal at all: INT or TSTP sent directly to the respective process are ignored, too. This comprises various applications I used to terminate using Ctrl+C on a regular basis (and which often don't have any better means of exiting): cat, find, tail -f, java, ping, mplayer when stuck on a broken file... Even bash ignores Ctrl+C when I want to break a command line I have been entering and then changed my mind (no ^C is printed in this case). I need to delete it character by character (of which there may be hundreds if filename completion has been used) or intentionally run the unwanted command. Strangely enough, vim does recognize Ctrl+C—just to say its "use :quit", of course. This is extremely annoying and prevents me from working efficiently. Everything had been working until lately, maybe a week ago or so. I can not find any possible causes in Google, perhaps I'm trying wrong search terms or misidentifying the main problem. What could be it and how could I revert the standard behaviour, please? Update Ctrl+Z works sometimes. It seems that in the very first terminal I launch after logging in it stops the running command but stops working after that.

  Read the article

• Windows 7 reboot and freezing, possible power problems?

  - by mikelbring

  My Gateway LX Series desktop is about 6-8 months old. When I bought it, it had Windows Vista. I then put the RC version of Windows 7 on it. About 3 months after I bought it, it would randomly start to reboot, actually just shut off. I monitored the temperature levels and they seemed normal. So I installed a fresh Windows 7 Ultimate OEM 64bit. It actually got worse and would reboot more frequently. I then contacted Gateway and they said my machine was built for Windows Vista (made me chuckle), and told me to update my BIOS. So I did, and it was fixed for a good couple months. Recently, it started to do it again. Now I noticed early on it was doing it most often, if not every time when I was either watching a flash video or playing a flash game. So I decided to download the drivers again and I also downloaded my motherboard drivers. Seemed to be okay. A week later it started doing it again. And now it's doing it even more frequently. Sometimes I would turn it on, login into Windows and *BAM!* it would shut off. Now I am at the point where I can hardly get it to turn on. It would freeze at the point where it says "Starting Windows", with the Windows logo. Sometimes it would say "Checking disk for consistency" or whatever and freeze there (not shut off, just freeze). I even got the prompt to launch startup repair. But that also freezes when it says starting Windows. It does not really freeze, just never loads up. I am kind of lost as to what's going on. I have a few ideas but nothing I want to pursue (graphics card? hard drive?). Another thing I did try was to boot into a live disk of Ubuntu and try to launch every program I could and get on the internet but I never got it to reboot. So it sounds like to me it's a Windows thing, but I have no idea. I am just stuck and would like to see if any one has any ideas or could lead me in the right direction.

  Read the article

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• Removing file with strange characters in filename in OS X

  - by SiggyF

  After a memory error in my program, I am stuck with a file with a strange filename. It's proving quite resistant to all normal methods to remove files with strange names. The filename is: %8BUȅ҉%95d%F8%FF%FF\x0f%8E%8F%FD%FF%FF%8B%B5T%F8%FF%FF%8B%85\%F8%FF%FF\x03%85x%F8%FF%FF%8B%95D%F8%FF%FF%8B%BD%9C%F8%FF%FF%8D\x04%86%8B%B5@%F8%FF%FF%89%85%90%F8%FF%FF%8B%85X%F8%FF%FF\x03%85%9C%F8%FF%FF%C1%E7\x02%8B%8Dx I tried the following: rm * - "No such file or directory" rm -- filename - "No such file or directory" rm "filename" - "No such file or directory" ls -i to get the inode number - "No such file or directory" stat filename - "No such file or directory" zip the directory where the file is in - error occured while adding "" to the archive. delete directory in finder - error -43 in python: os.unlink(os.listdir(u'.')[0]) - OSError No such file or directory find . -type f -exec rm {} \; - "No such file or directory" checked for locks on the file with lsof - no locks All these attempts result in a file (long filename here) not found error, or error -43. Even the ls -i. I couldn't find anymore options, so before reformatting or repairing my filesystem (fsck might help) I thought maybe there is something I missed. I wrote this small c program to get the inode: #include <stdio.h> #include <stddef.h> #include <sys/types.h> int main(void) { DIR *dp; struct dirent *ep; dp = opendir ("./"); if (dp != NULL) { while (ep = readdir (dp)) { printf("d_ino=%ld, ", (unsigned long) ep->d_ino); printf("d_name=%s.\n", ep->d_name); } (void) closedir (dp); } else perror ("Couldn't open the directory"); return 0; } That works. I now have the inode, but the normal find -inum inode -exec rm '{}' \; doesn't work. I think I have to use the clri now.

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >