Search Results

Search found 30555 results on 1223 pages for 'closed source'.

Page 167/1223 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

  • Creating reverse DNS entries which resolve [closed]

    - by Tiffany Walker
    Possible Duplicate: Reverse DNS - how to correctly configure for SMTP delivery I ran a DNS check and ended up with the following error: FAIL: Found reverse DNS entries which don't resolves IP-IP-IP-IP.HOST.DOMAIN.TLD ? ??? All IP's reverse DNS entries should resolve back to IP address (MX record's name -> IP -> IP Reverse -> IP). Many mail servers are configured to reject e-mails from IPs with inconsistent reverse DNS configuration. How do I properly configure and it so it goes to an IP?

    Read the article

  • Pentium 4 Willamette vs. Faster Celeron Northwood [closed]

    - by Synetech inc.
    Which is the preferable of the following two processors? Intel® Pentium® 4 Processor 1.70 GHz, 256K Cache, 400 MHz FSB Willamette Intel® Celeron® Processor 2.40 GHz, 128K Cache, 400 MHz FSB Northwood Details: A few months ago my motherboard died, so I bought a used computer that had a 2.4GHz Celeron. My old system had a 1.7GHz Pentium 4, so now I’m trying to decide which CPU to use. Obviously a P4 is preferable over a Celeron, but the Celeron is (significantly?) faster than the P4. I’m wondering if the faster Celeron might be better for certain tasks (ie, stronger but dumber is better at some things than smarter but weaker). I tried Googling for some reviews and comparisons for graphs to get a clear depiction of which is better overall, but found nothing that helped. (I did manage to find one page that indicates (apparently by poll, not benchmark) that the Celeron is better.) So which CPU should I use? Does anyone know of some graphs that I can use to compare the two? The system is a general-purpose machine for word-processing, Internet, and casual games (not Crysis, but not Solitaire either). It will be running Windows XP. The board is a 478 with 400MHz FSB.

    Read the article

  • Windows 7 Multi Monitor RDC Problem [closed]

    - by Peter Stegnar
    Possible Duplicate: Windows remote controle for dual monitor setup I would like to use all my monitors for the remote session (an option in RDC dialogue) if I connect (from Windows 7) to the one server with Windows 2008 R2 it works OK (I have remote connection on my all monitors) when do I connect to the another server with Windows 7 it just wound not use all my monitors, but just one (full screen mode). What do I missing here? Some setting on the Windows 7 server? Basically my question is: How to establish multimonitor RDC connection from Windows 7 to another Windows 7 running computer?

    Read the article

  • Windows RDP cannot connect to x64 server from XP SP3+ [closed]

    - by Tom
    Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

    Read the article

  • DHCP over WiFi on CentOS 6 [closed]

    - by dongle26
    Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

    Read the article

  • Nvidia Gefore 9800 GT Low FPS [closed]

    - by AskaGamer
    I have a Nvidia Geforce 9800 GT would like to improve the performance especially with regards to the FPS. Is there some setting on my Nvidia panel that I can modify to change my FPS? Does anyone know of a good overclocking tool that will work the way it should?

    Read the article

  • How would you shorten 5,000+ URLs? [closed]

    - by Tyler J Fisher
    How would you go about shortening approximately 5,000 permalinks? The links point to a remote media archiving server, and are unlikely to change. Example URLs: rtsp://foo-1.bar.com/xx/xx/xx/xx.rm http://media.foo.org/xx/xx/xx.mp4 The URLs are going to be stored in a local MySQL database, as such it's crucial that the URLs are in a manageable form (i.e bit.ly or ow.ly). There are bulk URL shortening services, but those only allow shortening of 100 links/day, which isn't technically feasible so I need to think of something else.

    Read the article

  • structure of ethernet frame (tcp/udp) [closed]

    - by rtmrtm2
    How is an ethernet-frame structured. is it: |MAC | |_______________| | |IP | | |___________| | |TCP | | |_______| | |HTTP| |__________|____| or the other way around? so in words: is the mac wrapped around the ip wrapped around the tcp wrapped arround the http? can someone post an image of the specific 'wrapping'? thanks in advance. regards, rtmrtm2

    Read the article

  • RAID 5 Install on Ubuntu Server 12.04 [closed]

    - by tarabyte
    Environment: Ubuntu Server 12.04, installing from bootable flash drive Error: No root file system is defined. Please correct this from the partitioning menu. I'm trying to set up a personal file server with software RAID 5. I just got three hard drives for this, but haven't found any solid documentation. I'm unsure what the basic way to partition my hard drives is. Can someone upload a screenshot of their "partition disks" screen so that I can compare with mine (attached)? Should I set the bootable flag? Do I need a /home partition? A /boot partition? Should I "Use [my partition] as: Ext4 journaling file system"? Or make that field "physical volume for RAID"? I am an engineer, but I have only a cursory knowledge of all-things-linux. If you know of any good learning resources I'd be happy to hear about those too (that way I don't have to blindly follow deprecated tutorials online). well, image would be here but i don't have a high enough reputation yet (please vote up :)) Thank you, References I've looked into: https://help.ubuntu.com/community/Installation/SoftwareRAID https://help.ubuntu.com/12.04/serverguide/advanced-installation.html http://forevergeeks.com/setup-ubuntu-server-with-raid-5/

    Read the article

  • "Tweet this" extension for BlogEngine.net [closed]

    - by unknown (yahoo)
    I have a blog that uses BlogEngine.net I am looking for an extension that automatically adds a "Tweet this" link for every post. When a user clicks on the "Tweet this" link, it would take them to their Twitter account with the "What are you doing" textarea prepopulated with the link of my blog post. Are there any out there that let me do this?

    Read the article

  • How to detect when window is closed when using Show() in WinForms C#

    - by MadBoy
    I've been using ShowDialog() in following way for all my new Windows. SomeGui test = new SomeGui(); test.ShowDialog(); refreshSomeListView(); However recently I've started to use Show() instead of ShowDialog() and it's working much better. The only drawback of this is that refreshSomeListView(); cannot be used like in example above since if i leave it there it's executed instantly when new Window shows up. What's the best way to know that the user has closed test window and that now refreshSomeListView(); should be executed? What's suggested approach for this? Should it involve setting events in test GUI on Close/Closing or there's other / better method?

    Read the article

  • Websphere MQ using JMS, closed connections stuck on the MQ

    - by Ahmad
    I have a simple JMS application deployed on OC4J under AIX server, in my application I'm listening to some queues and sending to other queues on a Websphere MQ deployed under AS400 server. The problem is that my connections to these queues are terminated/closed when it stays idle for some time with the error MQJMS1016 (this is not the problem), and when that happens I attempt to recover the connection and it works, however, the old connection is stuck at the MQ and would not terminate until it is terminated manually. The recovery code goes as follows: public void recover() { cleanup(); init(); } public void cleanup(){ if (session != null) { try { session .close(); } catch (JMSException e) { } } if (connection != null) { try { connection.close(); } catch (JMSException e) { } } } public void init(){ // typical initialization of the connection, session and queue... }

    Read the article

  • few question about linux [closed]

    - by oneat
    Can I execute assembly files with all privileges (using ports)? Does the newest DSL (damn small Linux) works with winXP. (makes bootloader for it) And does it support downloading applications automatically ?

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Has anyone used products by StorSimple? [closed]

    - by AlamedaDad
    Their products are storage systems similar to NetApp, but their "hook" is they provide automated tiered storage with the third tier being Cloud providers like Amazon and Azure. They have an interesting story in which they provide primary SAN/iSCSI storage to VMWare and Exchange and at the same time do snaphots to the Cloud. This provides a possible DR option if you have a second system at an alternate location. I was impressed, but I've never heard of them so I'm looking for input and advise on the product. Thanks in advance...

    Read the article

  • How to validate parameter values against a data source in Crystal Reports 2008

    - by mjh41
    I have a report designed in Crystal 2008. The report has a parameter field called "Member ID" that I want to use to get a string input from the user running the report. However, I want to do some sort of validation to ensure that the ID they entered is valid (it exists in a database table that I already have set up). Is there any way to do this? I know you can set up dynamic parameters that would give the user a dropdown list of Member ID values to choose from based on the data stored in my database table. But I don't want to make the user sort through thousands of IDs in a dropdown. I just want them to manually enter an ID and then have the report check the entered value against a database table. Is this possible?

    Read the article

  • How to make a 100% UNIQUE dvd? [closed]

    - by sajawikio
    Is it possible to make a DVD which would be next to impossible to replicate exactly even with special equipment? To be clear, not in the sense of making the data itself resistant to piracy - nothing like that. More like as an analogy to antiques - a reproduction of a furniture would be able to be spotted to a trained eye, that it is not the original. Is it possible to do this for a dvd? Like, say a dvd is copied, even by someone who is trying to use even special equipment and is hypothetically dying to copy the dvd exactly for whatever reason - even such copied dvd would be detectable that it is not exactly the original dvd somehow (as if it were a reproduction of an original antique, but not the original), and would be almost or even preferably impossible to actually copy 100% exact the dvd ever again. Just some ideas below on the sort of thing i might go about doing to do this, but really am not sure how or what programs, media, hardware, etc. would do the trick Not sure what would do the trick -- but for instance do there exist any blank dvd's that already come pre-recorded with some sort of serial number or bar code, or other metadata, or an encrypted hash, or something like that? Maybe any blank dvd will do but i should get a special software to extract hardcoded metadata? If so which software? Or special hardware even maybe? Such dvd which the "secret" can be: Well, to know what the "secret" is and if it is present on the disk, it probably should be readable by some software or maybe a particular hardware (i guess preferably only if some sort of key is known and input into the software, even better, only then such secret data on disk can be read, otherwise nothing shows up and it looks like just a regular disk with no secret on it), and Would be impossible to actually replicate, especially not with regular burning hardware and preferably not at all. Other idea: Is there any special software that can direct the write head of laser to physically "mar" the dvd in such a way that, when played in dvd player, makes a particular visual pattern or something like that, also say the mar itself shows up as faint scratch on disk, but would be impossible for someone to do themselves exactly? EDIT: Also to clarify suppose the dvd contains video and music that should be playable on dvd players, maybe a menu too (i.e not a dvd containing software), and also to clarify the question is about how to make dvd 100% unique, not how to make the actual content of dvd protected from "piracy".

    Read the article

  • JIT: How to specify source/sink for arcs?

    - by Rosarch
    I'm using JIT to render graphs. I'm using the RGraph feature. This JSON defines a graph: var json = [ { 'id': '1', 'name': 'CS 2110', 'adjacencies': ['0', '2'] }, { 'id': '1.5', 'name': 'INFO 2300', 'adjacencies': ['1'] }, { 'id': '0', 'name': 'CS 1110', 'adjacencies': ['1'] }, { 'id': '2', 'name': 'INFO 3300', 'adjacencies': ['1'] }, ] If I want a directed graph, how can I specify which nodes are sources and which are sinks?

    Read the article

  • Windows 7 does not recognise second display output [closed]

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Will Windows 7 work at all on my old toshiba [closed]

    - by andrew
    Windows 7 requires the following specifications: 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit) 16 GB available hard disk space (32-bit) or 20 GB (64-bit) DirectX 9 graphics device with WDDM 1.0 or higher driver Will it work at all on my old toshiba Satellite A100 PSAA8C-SK400E Intel® Core™ Solo processor T1350 (1.86GHz, 533MHz FSB, L1 Cache 32KB/32KB, L2 Cache 2MB) Standard Memory: 2x512 MB DDR2 Intel® Graphics Media Accelerator 950 with 8MB-128MB. The main problem I can see is that the graphics is not up to it.

    Read the article

  • Windows 8 permissions vs Windows 7 [closed]

    - by Saturn2888
    Possible Duplicate: How do I disable administrator prompt in Windows 8? When I upgraded from Windows 7 Pro 64-bit to Windows 8 Pro 64-bit, I noticed some permissions issues extremely problematic to my using the OS. When running Windows 7 or Vista with UAC off, I was able to navigate around the filesystem as if I was on Windows XP and prior such that I didn't have to run as administrator and could copy and edit files wherever I wanted. In Windows 8, turning off UAC no longer does this. Does anyone know how to get Windows 8's permissions to act like Windows 7 and Vista when UAC is disabled? NOTE: I did a clean install on my laptop with Windows 8, and it has the same issues.

    Read the article

  • Getting error while transfering PGP file through FTP : The underlying connection was closed: An unex

    - by sumeet Sharma
    I am trying to upload a PGP encrypted file through FTP. But I am getting an error message as follows: The underlying connection was closed: An unexpected error occurred on a receive. I am using the following code and getting the error at line: Stream ftpStream = response.GetResponse(); Is there any one who can help me out ASAP. Following is the code sample: FtpWebRequest request = WebRequest.Create("ftp://ftp.website.com/sample.txt.pgp") as FtpWebRequest; request.UsePassive = true; FtpWebResponse response = request.GetResponse() as FtpWebResponse; Stream ftpStream = response.GetResponse(); int bufferSize = 8192; byte[] buffer = new byte[bufferSize]; using (FileStream fileStream = new FileStream("localfile.zip", FileMode.Create, FileAccess.Write)) { int nBytes; while((nBytes = ftpStream.Read(buffer, 0, bufferSize) > 0) { fileStream.Write(buffer, 0, nBytes); } } Regards, Sumeet

    Read the article

  • Microsoft Security Essentials Vs. Avast Home [Free] Edition on a netbook [closed]

    - by Sarath
    I am using Avast Home Edition in my Dell Mini 10v. As you know the notebook is using an under powered processor which is not really suitable for browsing some rich internet websites. So I am in the middle of improving the performance. Will uninstalling Avast and using Microsoft Security Essentials will improve the performance? the memory usage of avast is quite low but I can't compromise security. Is Security essentials a good bet?

    Read the article

  • rewrite rule if iphone? [closed]

    - by daniel Crabbe
    hello there. just need one url on my site to check if its a mobile device and then rerite the url accordingly. want to rewrite; /play-reel/miranda-bowen/playpeaches-and-cream to /mobile/play-reel/miranda-bowen/playpeaches-and-cream RewriteCond %{HTTP_USER_AGENT} ^.*iPhone.*$ [NC] RewriteRule ^play-reel(.*)\$ mobile/play-reel$1 [R=302,NC] RewriteRule ^mobile/play-reel/([a-zA-Z0-9\-]+)/([a-zA-Z0-9\-]+)$ play-reel-new-html5-02.php?director=$1&video=$2 [L] # the 3rd line works but cant get the url to change for it to be picked up can anyone see what's wrong? There's no erro best, Dan

    Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >