configuration manager - Page 167

All Secure: "Securing Support"

Leaking a well-kept security secret: Oracle Configuration Manager

Help understanding my hard drive / partitioning situation... Pictures Included! :)

So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

Read the article

Is changing my job now a wise decision? [closed]

- by FlaminPhoenix

First a little background about myself. I am a javascript programmer with 3.8 years of experience. I joined my current company a year and 3 months ago, and I was recruited as a javascript programmer. I was under the impression I was a programmer in a programming team but this was not the case. No one else except me and my manager knows anything about programming in my team. The other two teammates, copy paste stuff from websites into excel sheets. I was told I was being recruited for a new project, and it was true. The only problem was that the server side language they were using was PHP. They were using a popular library with PHP, and I had never worked with PHP before. Nevertheless, I learnt it well enough to get things working, and received high praise from my boss's boss on whichever project I worked on. Words like "wow" , "This looks great, the clients gonna be impressed with this." were sprinkled every now and then on reviewing my work. They even managed to sell my work to a couple of clients and as I understand, both of my projects are going to fetch them a pretty buck. The problem: I was asked to move into a project which my manager was handling. I asked them for training on the project which never came, and sure enough I couldnt complete my first task on the new project without shortcomings. I told my manager there were things I didnt know how to get done in the new project due to lack of training. His project had 0 documentation. I was told he would "take care" of everything relating to those shortcomings. In the meantime, I was asked to switch to another project. My manager made the necessary changes and later told me that the build had "broken" on the production server and that I needed to "test" my changes before saying things were done. I never deployed it on the production server. He did. I never saw / had the opportunity to see the final build before it went to production. He called me for a separate meeting and started pointing fingers at me, but I took full responsibility even if I didnt have to. He later on got on a call with his boss, in my presence, and gave him the impression that it was all my fault. I did not confront him about this so far. I have worked late / done overtime without them asking a lot, but last week, I just got home from work, and I got calls asking me to solve an issue which till then they had kept quiet about even though they were informed about it. I asked my manager why I hadnt been tasked with this when I was in office. He started telling me which statements to put where, as if to mock me, and that this "is hardly an overtime issue" and this pissed me off. Also, during the previous meeting, he was constantly talking highly about his work, at the same time trying to demean mine. In the meantime, I have attended an interview with another MNC, and the interviewers there were fully respectful of my decision to leave my current company. Its a software company, so I can expect my colleagues to know a lot more than me. Im told I can expect their offer anytime this week. My questions: Is my anger towards my manager justified? While leaving, do I tell him that its because of his actions that Im leaving? Do I erupt in anger and tell him that he shouldnt have put the blame on me since he was the one doing the deployment? This is going to be my second resignation to this company. The first time I wanted to resign, I was asked to stay back and my manager promised a lot of changes, a couple of which were made. How do I keep myself from getting into such situations with my employers in the future?

Read the article

New Online Learning Library (OLL) content

- by Irina

Looking to brush up on OAM or OVD skills? Want some help with OIM? Well, have you checked our Online Learning Library (OLL) recently? OLL is a great way to pickup new skills in short blocks of time, and there is an enormous selection, on a diverse set of products. Every month these trainings get hundreds or thousands of hits. It would be worth your while to spend some time just poking around the nooks and crannies for items that interest you.A smattering of new OBEs and other content have recently become available, and if you haven't already, you might want to check them out: Identity Management: Business Scenarios Business and IT – Collaborative Access Review Sign Off and Closed Loop Identity Certification Oracle Identity Governance: End to End integration From Oracle Identity Manager to a Target Webservice Oracle Identity Manager: Configuring SOA Composite Oracle Identity Manager: Web Services Connector - Overview How to do a basic Oracle Virtual Directory (OVD) Setup? How to setup a simple Oracle Virtual Directory (OVD) Join? Installing Oracle Access Manager: Identity Server and WebPass Also new is an Oracle University 5-day class you might want to investigate: Oracle Access Manager R2: Administration Essentials An OAM Advanced Administration class is in the works and should be available late summer or fall, so keep your calendar clear! Be sure to let us know in the Comments if there is a training you would find useful. Happy Trails :)

Read the article

I get this error after upgade. please help

- by user203404

dpkg: dependency problems prevent configuration of initramfs-tools: initramfs-tools depends on initramfs-tools-bin (<< 0.99ubuntu13.2.1~); however: Version of initramfs-tools-bin on system is 0.103ubuntu0.2. klibc-utils (2.0.1-1ubuntu2) breaks initramfs-tools (<< 0.103) and is installed. Version of initramfs-tools to be configured is 0.99ubuntu13.2. dpkg: error processing initramfs-tools (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of plymouth: plymouth depends on initramfs-tools; however: Package initramfs-tools is not configured yet. dpkg: error processing plymouth (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of mountall: mountall depends on plymouth; however: Package plymouth is not configured yet. dpkg: error processing mountall (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of initscripts: initscripts depends on mountall (>= 2.28); however: Package mountall is not configured yet. dpkg: error processing initscripts (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of upstart: upstart depends on initscripts; however: Package initscripts is not configured yet. upstart depends on mountall; however: Package mountall is not configured yet. dpkg: error processing upstart (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of passwd: passwd depends on upstart-job; however: Package upstart-job is not installed. Package upstart which provides upstart-job is not configured yet. dpkg: error processing passwd (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools plymouth mountall initscripts upstart passwd E: Sub-process /usr/bin/dpkg returned an error code (1)

Read the article

Secondment promotion promises

- by user75460

I'm a Java developer at a large FTSE 30 company. My line manager approached me and asked if I'd like to be the teams lead developer. I was keen to accept. Initially he said I'd be acting-up for 3 months, then changed his tune and said I would be doing a 6 month secondment. During this time, he has got himself promoted and I have a new line manager. I have been very successful during this secondment and reviews have been overwhelmingly positive: both from my former line manager and current line manager. However, six months on, no lead role has been created in the organization and a new director has re-organised the structure of the team: two senior roles (senior Android and senior iOS) are going to be created. I feel a bit put-out that my secondment has amounted to nothing. I could have just done nothing and then applied for the senior role 6 months later (which I feel aren't as marketable as Lead developer). During my secondment I have basically become TA, senior developer, line manager and general go-to guy for all things (across Android and iOS). What do you think I should do, and has my company abused it's position? I feel they have offered a secondment to a role that they never really planned to create. During this time I have received no financial benefit for doing a more senior role.

Read the article

The Ultimate Troubleshooter

A valuable resource manager that can improve your PC's performance, startup times, and overall stability

Read the article

Oracle Database Appliance:???????????1Box?????2????????!

- by Yusuke.Yamamoto

11?14????????·????????Oracle Database Appliance???????????????? ????????:????????Oracle Database Appliance??????????? Oracle Database Appliance ??? Oracle Database Appliance ??Oracle Database ?????????????????????????·??????????Oracle Database ??(1)??????(2)RAC One Node ??(3)Oracle RAC ?????????????????????? Oracle Real Application Clusters(RAC)|??????????? ??????Oracle Database 11gR2 Oracle Real Application Clusters One Node ??(1)?????DB?????????????1Box???????? Oracle Database Appliance ???Oracle Real Application Clusters(RAC) ????????????DB??????????????????(????2??????????????????????????????????????????)?1Box????4U???????????????????????? ??(2)?????DB????2???????? Oracle Database Appliance ???Oracle Appliance Manager ????????????????????????Oracle Appliance Manager ????????(7????)???????????(Oracle Database?Oracle Grid Infrastructure?Oracle Enterprise Manager??)?????????(????????????????)?????????????????????2??????? ???Oracle Database Appliance ???????????????????????·????????????? Oracle Appliance Manager:????????????:7??????????????????? ??(3)????????????:???CPU???????????????????? Oracle Database Appliance ????Pay-As-You-Grow(?????????????)???????????????·????????????????Oracle Database Enterprise Edition ???????2??~24????????????? ?????????????????Oracle Database Enterprise Edition ????????(??????????????????)??????????????? Oracle Database Appliance:???? ????????????????????????????????? Oracle Database Appliance:???? ?????? Oracle Database Appliance Oracle Database Appliance:?????? Oracle Database Appliance:?????(??) Oracle Database Appliance:3D?? ????????? Oracle Direct ????Oracle Appliance Manager ????????????????????

Read the article

ID?????????

- by ???02

ID????????????????????????ID????????????????????????Oracle Identity Manager????????????????????????????????Oracle Identity Analytics ??????????????????????ID???????????????Oracle Identity Manager -- ???????????ID?????????Oracle Identity Manager (?? OIM )??ID?????????????????????????????????ID???????????????????????????????????????????????????????????????????????????OIM ?????????????????????????????????????????????????????? OIM ??????????OIM ????????????????????????/??/???????/??????????????????????????????????????????????????????????????????????OIM ???????????????????????????????????????????????????????????????????(1)ID?????????:??~??~??~???????????????????????????????????(2)ID????????:??????ID???????????????·??????????????????(3)??ID????:????????????????????????ID·??????????????????????????????????????(4)???????????????????:???????????1???????????????????????????????????(5)ID??????????????:???????????????ID???·????????????????????(6)ID???????????????:ID?????????·????????????????????????????????????????Oracle Identity Analytics -- ????????·?????????????????Oracle Identity Analytics? (?? OIA )????????????(??)???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????OIA????????????????????????????????????????????????????(1)??????????????????????????????????????(2)?????????????????? : ??(hierarchical)???(relationship)???????????????(3)ID?????????(OIM?)????????????????????? ??????????? ?????? Oracle Direct

Read the article

??????(????·?????)

- by ???02

??????(????·?????)??????????????????????????????????????????????????????????????????????????????????·??????????????????????????????????????Web?????·???????????????????????????????????????????????????????????????????·????????????????????????????????????????????????Web???????????Oracle Access Manager????????????????????????·??????????Oracle Enterprise Single-Sign On Suite????????????????????????????????????-??????????-?????????????Oracle Access Manager -- Web??????????·???????????????Oracle Access Manager??Web??????????????·????????????????????????????????????????????· ?????·????????????????????????????????????????????????????????????? ??????(1)??????:????·?????????????????????(2)???????????:??Web?????????????????????????????????????(3)????????:??????????????????(4)??????:????·???????????????????????Oracle Enterprise Single Sign-On Suite -- ???????????????·????????Oracle Enterprise Single Sign-On Suite??Web??????????????????????????????(?????????????????????????????)? ?????·????????????????????????·????????????????????????????????????????? ???????????????????????????? ??????(1)???????????????(2)??????????????????????????????????????????????????????????????????(3)??????????Windows???LDAP??????????????(4)Windows???????????????????????????????????(5)ID??????????????????????ID???·?????????????????????? ?????? Oracle Direct

Read the article

Java Hibernate/C3P0 error: "Could not obtain connection metadata. An attempt by a client to checkout

- by Allan

I'm trying to get some code I was passed up and running. It appears to use the Hibernate framework. I've gotten past most of the errors tweaking the configuration, but this one has me dead stumped. It's trying to connect to two databases: gameapp and gamelog. Both exist. It seems to have issues connecting to gamelog, but none connecting to gameapp (later in the init, it connects to and loads other DBs just fine). Below, I've pasted the error and exception stack dump. I imaging there's something else in the configs, so I've also included the configuration file for that db. I know this is very vague, but I'm hoping some pro can see the stupid mistake I'm missing. <?xml version="1.0" encoding="GBK"?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="dialect">org.hibernate.dialect.MySQLDialect</property> <property name="connection.driver_class">com.mysql.jdbc.Driver</property> <property name="connection.url">jdbc:mysql://127.0.0.1:3306/gamelog</property> <property name="connection.username">root</property> <property name="connection.password"></property> <property name="connection.useUnicode">true</property> <property name="connection.characterEncoding">UTF-8</property> <property name="hibernate.jdbc.batch_size">100</property> <property name="jdbc.fetch_size">1</property> <property name="hbm2ddl.auto">none</property> <property name="connection.useUnicode">true</property> <property name="show_sql">true</property>  <property name="hibernate.connection.provider_class">org.hibernate.connection.C3P0ConnectionProvider</property> <property name="hibernate.c3p0.min_size">5</property> <property name="hibernate.c3p0.max_size">10</property> <property name="hibernate.c3p0.timeout">30</property> <property name="hibernate.c3p0.idle_test_period">30</property> <property name="hibernate.c3p0.max_statements">0</property> <property name="hibernate.c3p0.acquire_increment">5</property> </session-factory> </hibernate-configuration> Exception and stack trace: 2010-04-30 17:50:00,411 WARN [org.hibernate.cfg.SettingsFactory] - Could not obtain connection metadata java.sql.SQLException: An attempt by a client to checkout a Connection has timed out. at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106) at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65) at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527) at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128) at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:35) at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:76) at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:1933) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1216) at com.database.hibernate.util.HibernateFactory.<init>(Unknown Source) at com.database.hibernate.util.HibernateUtil.<clinit>(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl.initBreedGoods(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl.access$000(Unknown Source) at com.server.databaseop.goodOp.GoodOpImpl$1.run(Unknown Source) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java:351) at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:178) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:165) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:267) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) Caused by: com.mchange.v2.resourcepool.TimeoutException: A client timed out while waiting to acquire a resource from com.mchange.v2.resourcepool.BasicResourcePool@ca470 -- timeout at awaitAvailable() at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317) at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557) at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477) at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525) ... 18 more

Read the article

SecurityNegotiationException in WCF Service Hosted on IIS

- by Ram

Hi, I have hosted a WCF service on IIS. The configuration file is as follows <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.web.extensions> <scripting> <webServices>    </webServices>  </scripting> </system.web.extensions>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <system.serviceModel> <services> <service name="IISTest2.Service1" behaviorConfiguration="IISTest2.Service1Behavior">  <endpoint address="" binding="wsHttpBinding" contract="IISTest2.IService1">  <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="IISTest2.Service1Behavior">  <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> The client configuration file is as follows <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IService1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://yyy.zzz.xxx.net/IISTest2/Service1.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IService1" contract="ServTest.IService1" name="WSHttpBinding_IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> When I tried to access the service from client application, I got SecurityNegotiationException and details are Secure channel cannot be opened because security negotiation with the remote endpoint has failed. This may be due to absent or incorrectly specified EndpointIdentity in the EndpointAddress used to create the channel. Please verify the EndpointIdentity specified or implied by the EndpointAddress correctly identifies the remote endpoint. If I host the service on ASP .NET Dev server, it work well but if I host on IIS above mentioned error occurs. Thanks, Ram

Read the article

How can I keep the the logic to translate a ViewModel's values to a Where clause to apply to a linq query out of My Controller?

- by Mr. Manager

This same problem keeps cropping up. I have a viewModel that doesn't have any persistent backing. It is just a ViewModel to generate a search input form. I want to build a large where clause from the values the user entered. If the Action Accepts as a parameter SearchViewModel How do I do this without passing my viewModel to my service layer? Service shouldn't know about ViewModels right? Oh and if I serialize it, then it would be a big string and the key/values would be strongly typed. SearchViewModel this is just a snippet. [Display(Name="Address")] public string AddressKeywords { get; set; } /// <summary> /// Gets or sets the census. /// </summary> public string Census { get; set; } /// <summary> /// Gets or sets the lot block sub. /// </summary> public string LotBlockSub { get; set; } /// <summary> /// Gets or sets the owner keywords. /// </summary> [Display(Name="Owner")] public string OwnerKeywords { get; set; } In my controller action I was thinking of something like this. but I would think all this logic doesn't belong in my Controller. ActionResult GetSearchResults(SearchViewModel model){ var query = service.GetAllParcels(); if(model.Census != null){ query = query.Where(x=>x.Census == model.Census); } if (model.OwnerKeywords != null){ query = query.Where(x=>x.Owners == model.OwnerKeywords); } return View(query.ToList()); }

Read the article

Adjust timezone of an AVM Fritz!Box 7390

It's been a while that I purchased an AVM Fritz!Box 7390 but since I'm using this 'PABX' here in Mauritius, I'm not really happy about the wrong time in the logs or handsets connected. Lately, I had some spare time to address this issue, and the following article describes how to adjust the timezone settings in general. The original idea came from an FAQ found in c't 21/11 (for a 7270 written in German language) but I added a couple of things based on other resources online. The following tutorial may be valid for other models, too. Use your common sense and think before you act. Brief introduction to AVM Fritz!Box devices The Fritz!Box series of AVM has been around for more than a decade and those little 'red boxes' have a high level of versatility for your small office or home. High-speed connections, secure WLAN and convenient telephony make a home network out of any network. Whether it's a computer, tablet or smartphone, any device can be connected to the FRITZ!Box. And best of all, installation is so simple that users will be online in a matter of minutes. If you want to have peace of your mind in your small network then a Fritz!Box is the easiest way to achieve that. I'm using my box primarly as WiFi access point, VoIP gateway and media server but only because it came in second after my Linux system. Limitations in the administrative Web UI Unfortunately, there are no possibilities to adjust the timezone settings in the Web UI at all - even not in Expert mode. I assume that this is part of the 'simplification' provided by AVM's design team. That's okay, as long as you reside in Central Europe, and the implicit time handling is correct for your location. Adjusting the timezone I got my device through an order at Amazon Germany already some time ago, and honestly I wasn't bothered too much about the pre-configured (fixed) timezone setting - CET or CEST depending on daylight saving. But you know, it's that kind of splinter at the back of your head that keeps nagging and bothering you indirectly. So, finally I sat down yesterday evening and did a quick research on how to change the timezone. Even though there are a number of results, I read the FAQ from the c't magazine first, as I consider this as a trusted and safe source of information. Of course, it is most important to avoid to 'brick' your device. You've been warned - No support Tinkering with the configuration of any AVM devices seems to be a violation of their official support channels. So, be warned and continue onlyin case that you're sure about what you are going to do. The following solutions are 'as-is' and they worked for my box flawlessly but may cause an issue in your case. Don't blame me... Solution 1 - Backup, modify and restore That's the way as described in the c't article and a couple of other forum postings I found online, mainly from Australia. Login the administrative Web UI and navigate to 'System => Einstellungen sichern' (System => Backup configuration) and store your current configuration to a local file on your machine. Despite some online postings it is not necessary to specify a password in order to secure or encrypt your backup. IMHO, this only adds another unnecessary layer of complexity to the process. Anyway, next you should create a another copy of your settings and keep it unmodified. That's our safety net to restore the current settings in case that we might have to issue a factory setting reset to the box. Now, open the configuration file with an advanced text editor which is capable to deal with Unix carriage returns properly - Windows Notepad doesn't do the job but Wordpad or Notepad++. Personally, I don't care and simply use geany, gedit or nano on Linux. In total there are 3 modifications that we have to apply to the configuration file - one new line and two adjustments. First, we have to add an instruction near the top of file that overrides the device internal checksum validation. Without this line, your settings won't be accepted. Caution: The drectives are case-sensitve and your outcome should read something like this: **** FRITZ!Box Fon WLAN 7390 CONFIGURATION EXPORTPassword=$$$$<ignore>FirmwareVersion=84.05.52CONFIG_INSTALL_TYPE=iks_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_dect_64415OEM=avmCountry=049Language=deNoChecks=yes**** CFGFILE:ar7.cfg/* * /var/flash/ar7.cfg * Mon Jul 29 10:49:18 2013 */ar7cfg {... Then search for the expression 'timezone' and you should find a section like this one (~ line 1113): timezone_manual { enabled = no; offset = 0; dst_enabled = no; TZ_string = ""; name = "";} We would like to manually handle the timezone setting in our device and therefore we have to enable it and set the proper value for Mauritius. The configuration block should like so afterwards: timezone_manual { enabled = yes; offset = 0; dst_enabled = no; TZ_string = "MUT-4"; name = "";} We specify the designation and the offset in hours of the timezone we would like to have. Caution: The offset indicates the value one has to add to the local time to arrive at UTC. More details are described in the Explanation of TZ strings. Mauritius has GMT+4 which means that we have to substract 4 hours from the local time to have UTC. Finally, we restore the modified configuration file via the administrative Web UI under 'System => Einstellungen sichern => Wiederherstellen' (System => Backup configuration => Restore). This triggers a reboot of the device, so please be patient and wait until the Web UI displays the login dialog again. Good luck! Solution 2 - Telnet A more elegant, read: technically interesting, way to adjust configuration settings in your Fritz!Box is to access it directly through Telnet. By default AVM disables that protocol channel and you have to enable it with a connected telephone. In order to activate the telnet service dial the following combination: #96*7* #96*8* (to disable telnet again after work has been completed) If you're using an AVM handset like the Fritz!Fon then you will receive a confirmation message on the display like so: telnetd ein Next, depending on your favourite operating system, you either launch a Command prompt in Windows or a terminal in Linux, get your Admin password ready, and you connect to your box like so: $ telnet fritz.box Trying 192.168.1.1...Connected to fritz.box.Escape character is '^]'.password: BusyBox v1.19.3 (2012-10-12 14:52:09 CEST) built-in shell (ash)Enter 'help' for a list of built-in commands.ermittle die aktuelle TTYtty is "/dev/pts/0"Console Ausgaben auf dieses Terminal umgelenkt# That's it, you are connected and we can continue to change the configuration manually. In order to adjust the timezone setting we have to open the ar7.cfg file. As we are now operating in a specialised environment, we only have limited capabilities at hand. One of those is a reduced version of vi - nvi. Let's open a second browser window with the fine manual page of nvi and start to edit our configuration file: # nvi /var/flash/ar7.cfg In our configuration file, we have to navigate to the timezone directives. The easiest way is to search for the expression 'timezone' by typing in the following: /timezone (press Enter/Return) Now, we should see the exact lines of code like in the backed up version: timezone_manual { enabled = no; offset = 0; dst_enabled = no; TZ_string = ""; name = ""; } And of course, we apply the same changes as described in the previous section: timezone_manual { enabled = yes; offset = 0; dst_enabled = no; TZ_string = "MUT-4"; name = ""; } Finally, we have to write our changes back to the file and apply the new settings. :wq (press Enter/Return) # ar7cfgchanged That's it! Finally, close the telnet session by pressing Ctrl+] and enter 'quit'. Additional ideas... There are a couple of more possibilities to enhance and to extend the usability of a Fritz!Box. There are lots of resources available on the net, but I'd like to name a few here. Especially for Linux users it is essential to be able to connect to any device remotely in a safe and secure way. And the installation of a SSH server on the box would be a first step to improve this situation, also to avoid to run telnet after all. Sometimes, there might be problems in your VoIP connections, feel free to adjust the settings of codecs and connection handling, too. I guess, you'll get the idea... The only frontiers are in your mind.

Read the article

Django custom managers - how do I return only objects created by the logged-in user?

- by Tom Tom

I want to overwrite the custom objects model manager to only return objects a specific user created. Admin users should still return all objects using the objects model manager. Now I have found an approach that could work. They propose to create your own middleware looking like this: #### myproject/middleware/threadlocals.py try: from threading import local except ImportError: # Python 2.3 compatibility from django.utils._threading_local import local _thread_locals = local() def get_current_user(): return getattr(_thread_locals, 'user', None) class ThreadLocals(object): """Middleware that gets various objects from the request object and saves them in thread local storage.""" def process_request(self, request): _thread_locals.user = getattr(request, 'user', None) #### end And in the Custom manager you could call the get_current_user() method to return only objects a specific user created. class UserContactManager(models.Manager): def get_query_set(self): return super(UserContactManager, self).get_query_set().filter(creator=get_current_user()) Is this a good approach to this use-case? Will this work? Or is this like "using a sledgehammer to crack a nut" ? ;-) Just using: Contact.objects.filter(created_by= user) in each view doesn`t look very neat to me. EDIT Do not use this middleware approach !!! use the approach stated by Jack M. below After a while of testing this approach behaved pretty strange and with this approach you mix up a global-state with a current request. Use the approach presented below. It is really easy and no need to hack around with the middleware. create a custom manager in your model with a function that expects the current user or any other user as an input. #in your models.py class HourRecordManager(models.Manager): def for_user(self, user): return self.get_query_set().filter(created_by=user) class HourRecord(models.Model): #Managers objects = HourRecordManager() #in vour view you can call the manager like this and get returned only the objects from the currently logged-in user. hr_set = HourRecord.objects.for_user(request.user)

Read the article

Linq to XML: create an anonymous object with element attributes and values

- by Phil Scholtes

I'm new to Linq and I'm trying to query a XML document to find a list of account managers for a particular user. (I realize it might make more sense to put this in a database or something else, but this scenario calls for a XML document). <user emailAddress='[email protected]'> <accountManager department='Customer Service' title='Manager'>[email protected]</accountManager> <accountManager department='Sales' title='Account Manager'>[email protected]</accountManager> <accountManager department='Sales' title='Account Manager'>[email protected]</accountManager> </user> I trying to create a list of objects (anonymous type?) with properties consisting of both XElement attributes (department, title) and values (email). I know that I can get either of the two, but my problem is selecting both. Here is what I'm trying: var managers = _xDoc.Root.Descendants("user") .Where(d => d.Attribute("emailAddress").Value == "[email protected]") .SelectMany(u => u.Descendants("accountManager").Select(a => a.Value)); foreach (var manager in managers) { //do stuff } I can get at a.Value and a.Attribute but I can't figure out how to get both and store them in an object. I have a feeling it would wind up looking something like: select new { department = u.Attribute("department").Value, title = u.Attribute("title").Value, email = u.Value };

Read the article

How to sort a list so that managers are always ahead of their subordinates

- by James Black

I am working on a project using Groovy, and I would like to take an array of employees, so that no manager follows their subordinates in the array. The reason being that I need to add people to a database and I would prefer not to do it in two passes. So, I basically have: <employees> <employee> <employeeid>12</employeeid> <manager>3</manager> </employee> <employee> <employeeid>1</employeeid> <manager></manager> </employee> <employee> <employeeid>3</employeeid> <manager>1</manager> </employee> </employees> So, it should be sorted as such: employeeid = 1 employeeid = 3 employeeid = 12 The first person should have a null for managers. I am thinking about a binary tree representation, but I expect it will be very unbalanced, and I am not certain the best way to do this using Groovy properly. Is there a way to do this that isn't going to involve using nested loops?

Read the article

Getting a list of Tasks that belong to a Role from Azman

- by Steven

I'm using the AZROLESLib which is from the COM references "azroles 1.0 Type Library" and I am trying to create a list of the designated tasks for each role that I have currently set in my authorization manager but when I loop through the tasks for the role, I get the role name. I've looked all around but couldn't find anything that would help. Here's what I got currently (It's not super pretty but i'm just trying to get it working at the moment). AzAuthorizationStoreClass AzManStore = new AzAuthorizationStoreClass(); AzManStore.Initialize(0, ConfigurationManager.ConnectionStrings["AzManStore"].ConnectionString, null); IAzApplication azApp = AzManStore.OpenApplication("StoreName", null); StringBuilder output = new StringBuilder(); Array tasks = null; foreach (IAzRole currentRole in azApp.Roles) { output.Append(currentRole.Name + "<br />"); tasks = (Array)currentRole.Tasks; foreach (object ob in tasks) { output.Append("   -" + ob.ToString() + "<br />"); } } return output.ToString(); What comes out is: Administrator -Administrator Account Manager -Account Manager Corporate Marketing Specialist -Corporate Marketing Specialist General Employee -General Employee Marketing Manager -Marketing Manager Regional Marketing Specialist -Regional Marketing Specialist Sales Manager -Sales Manager Webmaster -Webmaster but what should come out is something like: Webmaster Websites Maintain News Maintain Events Maintain Reports Read Thanks in advance.

Read the article

How to sort a list so that managers are always ahead of their subordinates (How do I do a topologica

- by James Black

I am working on a project using Groovy, and I would like to take an array of employees, so that no manager follows their subordinates in the array. The reason being that I need to add people to a database and I would prefer not to do it in two passes. So, I basically have: <employees> <employee> <employeeid>12</employeeid> <manager>3</manager> </employee> <employee> <employeeid>1</employeeid> <manager></manager> </employee> <employee> <employeeid>3</employeeid> <manager>1</manager> </employee> </employees> So, it should be sorted as such: employeeid = 1 employeeid = 3 employeeid = 12 The first person should have a null for managers. I am thinking about a binary tree representation, but I expect it will be very unbalanced, and I am not certain the best way to do this using Groovy properly. Is there a way to do this that isn't going to involve using nested loops?

Read the article

[JDBCExceptionReporter] SQL Warning in Hibernate

- by adisembiring

Hi all, I'm using Hibernate 3.2.1 and database SQLServer2000 while I'm try to insert some data using my dao, some warning occurred like this: java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database changed to BTN_SPP_DB at com.microsoft.jdbc.base.BaseWarnings.createSQLWarning(Unknown Source) at com.microsoft.jdbc.base.BaseWarnings.get(Unknown Source) at com.microsoft.jdbc.base.BaseConnection.getWarnings(Unknown Source) at org.hibernate.util.JDBCExceptionReporter.logAndClearWarnings(JDBCExceptionReporter.java:22) at org.hibernate.jdbc.ConnectionManager.closeConnection(ConnectionManager.java:443) at org.hibernate.jdbc.ConnectionManager.aggressiveRelease(ConnectionManager.java:400) at org.hibernate.jdbc.ConnectionManager.afterTransaction(ConnectionManager.java:287) at org.hibernate.jdbc.JDBCContext.afterTransactionCompletion(JDBCContext.java:221) at org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:119) at co.id.hanoman.btnmw.spp.dao.TagihanDao.save(TagihanDao.java:43) at co.id.hanoman.btnmw.spp.dao.TagihanDao.save(TagihanDao.java:1) at co.id.hanoman.btnmw.spp.dao.test.TagihanDaoTest.testSave(TagihanDaoTest.java:81) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99) at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81) at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34) at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75) at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45) at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66) at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35) at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42) at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34) at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52) at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:45) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) my hibernate initialization is: 2010-04-26 22:54:05,203 INFO [Version] Hibernate Annotations 3.3.0.GA 2010-04-26 22:54:05,234 INFO [Environment] Hibernate 3.2.1 2010-04-26 22:54:05,234 INFO [Environment] hibernate.properties not found 2010-04-26 22:54:05,234 INFO [Environment] Bytecode provider name : cglib 2010-04-26 22:54:05,234 INFO [Environment] using JDK 1.4 java.sql.Timestamp handling 2010-04-26 22:54:05,343 INFO [Configuration] configuring from resource: /hibernate.cfg.xml 2010-04-26 22:54:05,343 INFO [Configuration] Configuration resource: /hibernate.cfg.xml 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] trying to resolve system-id [http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd] 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] recognized hibernate namespace; attempting to resolve on classpath under org/hibernate/ 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] located [http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd] in classpath 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.dialect=org.hibernate.dialect.SQLServerDialect 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.driver_class=com.microsoft.jdbc.sqlserver.SQLServerDriver 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.url=jdbc:microsoft:sqlserver://12.56.11.65:1433;databaseName=BTN_SPP_DB 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.username=spp 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.password=spp

Read the article

java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database changed to X

- by adisembiring

Hi all, I'm using Hibernate 3.2.1 and database SQLServer2000 while I'm try to insert some data using my dao, some warning occurred like this: java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database changed to BTN_SPP_DB at com.microsoft.jdbc.base.BaseWarnings.createSQLWarning(Unknown Source) at com.microsoft.jdbc.base.BaseWarnings.get(Unknown Source) at com.microsoft.jdbc.base.BaseConnection.getWarnings(Unknown Source) at org.hibernate.util.JDBCExceptionReporter.logAndClearWarnings(JDBCExceptionReporter.java:22) at org.hibernate.jdbc.ConnectionManager.closeConnection(ConnectionManager.java:443) at org.hibernate.jdbc.ConnectionManager.aggressiveRelease(ConnectionManager.java:400) at org.hibernate.jdbc.ConnectionManager.afterTransaction(ConnectionManager.java:287) at org.hibernate.jdbc.JDBCContext.afterTransactionCompletion(JDBCContext.java:221) at org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:119) at co.id.hanoman.btnmw.spp.dao.TagihanDao.save(TagihanDao.java:43) at co.id.hanoman.btnmw.spp.dao.TagihanDao.save(TagihanDao.java:1) at co.id.hanoman.btnmw.spp.dao.test.TagihanDaoTest.testSave(TagihanDaoTest.java:81) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99) at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81) at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34) at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75) at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45) at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66) at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35) at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42) at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34) at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52) at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:45) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) my hibernate initialization log is: 2010-04-26 22:54:05,203 INFO [Version] Hibernate Annotations 3.3.0.GA 2010-04-26 22:54:05,234 INFO [Environment] Hibernate 3.2.1 2010-04-26 22:54:05,234 INFO [Environment] hibernate.properties not found 2010-04-26 22:54:05,234 INFO [Environment] Bytecode provider name : cglib 2010-04-26 22:54:05,234 INFO [Environment] using JDK 1.4 java.sql.Timestamp handling 2010-04-26 22:54:05,343 INFO [Configuration] configuring from resource: /hibernate.cfg.xml 2010-04-26 22:54:05,343 INFO [Configuration] Configuration resource: /hibernate.cfg.xml 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] trying to resolve system-id [http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd] 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] recognized hibernate namespace; attempting to resolve on classpath under org/hibernate/ 2010-04-26 22:54:05,406 DEBUG [DTDEntityResolver] located [http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd] in classpath 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.dialect=org.hibernate.dialect.SQLServerDialect 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.driver_class=com.microsoft.jdbc.sqlserver.SQLServerDriver 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.url=jdbc:microsoft:sqlserver://12.56.11.65:1433;databaseName=BTN_SPP_DB 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.username=spp 2010-04-26 22:54:05,453 DEBUG [Configuration] hibernate.connection.password=spp

Read the article

Mysql trigger to block a row delete

- by rtacconi

I wuold like to define a trigger to block the deletion of the row with ID 2 of the configuration table, you might guess why, I am trying something like that: CREATE TRIGGER do_not_delete_configuration_1 BEFORE DELETE ON configuration FOR EACH ROW BEGIN IF (OLD.configurationid != 1) THEN DELETE FROM configuration WHERE configuration.configuration=OLD.configurationid; END IF; END; | without a positive result.

Read the article

Telesharp – An Application Repository for .NET applications

- by cibrax

A year ago, we released SO-Aware as our first product in Tellago Studios. SO-Aware represented a new way to manage web services and all the related artifacts like configuration, tests or monitoring data in the Microsoft stack. It was based on the idea of using a lightweight SOA governance approach with a central repository exposed through RESTful services. At that point, we thought the same idea could be extended to enterprise applications in general by providing a generic repository for many of the runtime or design time artifacts generated during the development like configuration, application description or topology (a high level view of the components that made up a system), logging information or binaries. It took us several months to give a form to that idea and implement it as a product, but it is finally here and I am very proud to announce the release today under the name of “TeleSharp”. Telesharp provides in a nutshell the following features, 1. Configure your application topology in a central repository. Application topology in this context means that you can decompose your application and describe it in terms of components and how they interact each other. For example, you can tell that the CRM system is made up of a couple of WCF services and a ASP.NET MVC front end. 2. Centralize configuration for your applications and components. You can import existing .NET configuration sections into the repository and associate them to the different components. In addition, environment overrides are supported for the configuration sections. We provide tooling and extensions in Visual Studio for managing all the configuration, and a set of powershell commands for automating the configuration deployment. 3. Browse all the assemblies and types remotely in your application servers in a web browser using an interface similar to any of the existing .NET reflection tools. You can easily determine this way whether the server is running the correct version of your applications. 4. Centralize logging and exception management into the repository. You get different reports and a pivot viewer experience for browsing all the different logging information generated by your applications. In addition, TeleSharp provides different providers for pushing the logging information to the central repository using well-known frameworks like ELMAH, Log4Net, EntLib or even Windows ETW. The central repository itself is implemented as a set of OData services that any application can easily consume using regular Http. You can read more details in this introductory post If you think this product can be a good fit in your organization, you can request a trial version in our Tellago Studios website.

Read the article

Enabling WinRM by Group Policy

- by SaintNick

I'm having partial success enabling WinRM through Active Directory GPO's on our Server 2008 R2 environment. I've created a GPO that enables "Allow automatic configuration of listeners" and also enables all the necessary predefined WinRM Firewall rules. This GPO works fine for our webservers. Indeed, this is reflected by the "Server Manager Remote Management" nicely flipping to "enabled" in Server Manager Server Summary. However, the same GPO applied to both our Management servers, which are Domain Controllers, does not give the same result. I see the GPO settings being applied, including the listener as confirmed by C:\Windows\system32>winrm e winrm/config/listener Listener [Source="GPO"] Address = * Transport = HTTP Port = 5985 Hostname Enabled = true URLPrefix = wsman CertificateThumbprint ListeningOn = 10.32.40.210, 10.32.40.211, 10.32.40.212 But in Server Manager, Server Summary, Remote Management remains on "disabled" and indeed when trying to connect to one of these machines Server Manager gives an "Access Denied". Manually enabling WinRM locally via Server Manager "Configure Server Manager Remote Management" on either of these machines works fine. What can be the cause? Can it have something to do with theses machines being DC's and needing extra settings in the GPO? Nick Reid

Read the article

deploying war on tomcat fails to start

- by Asghar

i have a java application which uses JAX_WS when i deployed on my tomcat5 server . it is deployed successfully. but it fails to start SEVERE: WSSERVLET11: failed to parse runtime descriptor: java.lang.IllegalArgumentException: prefix cannot be "null" when creating a QName java.lang.IllegalArgumentException: prefix cannot be "null" when creating a QName at javax.xml.namespace.QName.<init>(xml-commons-apis-1.3.02.jar.so) at gnu.xml.stream.XMLParser.getAttributeName(libgcj.so.7rh) at com.sun.xml.ws.util.xml.XMLStreamReaderFilter.getAttributeName(XMLStreamReaderFilter.java:228) at com.sun.xml.ws.streaming.XMLStreamReaderUtil$AttributesImpl.<init>(XMLStreamReaderUtil.java:355) at com.sun.xml.ws.streaming.XMLStreamReaderUtil.getAttributes(XMLStreamReaderUtil.java:198) at com.sun.xml.ws.transport.http.DeploymentDescriptorParser.parseAdapters(DeploymentDescriptorParser.java:204) at com.sun.xml.ws.transport.http.DeploymentDescriptorParser.parse(DeploymentDescriptorParser.java:147) at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:124) at org.apache.catalina.core.StandardContext.listenerStart(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardContext.start(catalina-5.5.23.jar.so) at org.apache.catalina.manager.ManagerServlet.start(catalina-manager-5.5.23.jar.so) at org.apache.catalina.manager.HTMLManagerServlet.start(catalina-manager-5.5.23.jar.so) at org.apache.catalina.manager.HTMLManagerServlet.doGet(catalina-manager-5.5.23.jar.so) at javax.servlet.http.HttpServlet.service(tomcat5-servlet-2.4-api-5.5.23.jar.so) at javax.servlet.http.HttpServlet.service(tomcat5-servlet-2.4-api-5.5.23.jar.so) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(catalina-5.5.23.jar.so) at org.apache.catalina.core.ApplicationFilterChain.doFilter(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardWrapperValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardContextValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardHostValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.valves.ErrorReportValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardEngineValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.connector.CoyoteAdapter.service(catalina-5.5.23.jar.so) at org.apache.coyote.http11.Http11Processor.process(tomcat-http-5.5.23.jar.so) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(tomcat-http-5.5.23.jar.so) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(tomcat-util-5.5.23.jar.so) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(tomcat-util-5.5.23.jar.so) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(tomcat-util-5.5.23.jar.so) at java.lang.Thread.run(libgcj.so.7rh)

Search Results

Search found 23399 results on 936 pages for 'configuration manager'.

Page 167/936 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174 | Next Page >

- by xopenex

- by FlaminPhoenix

- by Irina

- by user203404

- by user75460

- by Yusuke.Yamamoto

- by ???02

- by ???02

- by Allan

- by Ram

- by Mr. Manager

- by Tom Tom

- by Phil Scholtes

- by James Black

- by Steven

- by James Black

- by adisembiring

- by adisembiring

- by rtacconi

- by cibrax

- by SaintNick

- by Asghar

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174 | Next Page >