Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 167/1213 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

  - by Alexander Tritan

  I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• ubuntu 12.04.3 - Reverse DNS issue - slow ping interval but normal ping value

  - by McArthor Lee

  i'm running ubuntu 12.04.3 x86 desktop in my corporation environment. I join the corp domain by Likewise open. But when I ping another pc, say hostname is pc-test, "ping pc-test" or "ping pc-test.domain.name" returns slow interval (about 5 seconds) but the ping value is below 1 ms. When I use "ping -n pc-test", everything works well. So I conclude this is about reverse DNS issue. how to fix this issue? many thanks! Edit: In my understanding, reverse DNS issue is related to DNS server or Wins server, not only an ubuntu issue, is this right? if I wanna fix this issue as much as possible on ubuntu but not on network servers, what to do?

  Read the article

• Gray "apply" button in NetworkManager openvpn connection window

  - by user20627

  I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain. I was told the following: Sounds like a policy issue. read this thread: http://ubuntuforums.org/showthread.php?t=1616355 look carefully in the file mentioned, at the element. What is there ? "No" will cause the action detailed to be unavailable. Ideally "yes" or "auth_admin_keep" should be there. They will either allow all access, or prompt for a admin password. The above does not seem to work for me - It still has a gray apply button. If I choose a file for User certificate as well as CA Certificate "which is all openvpn supplies and needs" and a key file it will allow me to click apply - but obviously wont connect. :l I am at a lost end.

  Read the article

• Do I need to install a package (openSWAN or strongSWAN maybe) to use ipsec?

  - by user68886

  I want to connect to a windows share that only accepts ipsec transport mode. I have a list of security policies and a shared secret. I've skimmed through the man page on ipsec.conf on the web and it seems to be the place to put these polices. If ipsec is part of the kernel (and I think it is, I'm using Ubuntu 12.04) do I need to install some other package in order to get this working? I'm guessing it's either openSWAN or strongSWAN but don't know the difference.

  Read the article

• Bastion on ubuntu 12.04 64bit black screen

  - by dm03514

  I just downloaded the Humblebundle with bastion. After installing Bastion and starting it up, only a blank screen shows the the mouse arrow. I can here the sound fine. I read a message board that recommended starting it with -windowed -x 1280 -y 720 which does not work. I am on ubuntu 12.04 64 bit, with a intel 3000 integrated graphics card. Does anyone know how I can get this to work properly? thank you.

  Read the article

• Dell Studio 1737 Overheating

  - by Sean

  I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

  Read the article

• Cannot control the fan on a Sony Vaio laptop

  - by Xobb

  I've got Sony Vaio laptop and my fan is on all the time, though the temperature on the video-adapter is always over 60°?. As I've googled, vaiofand does not support VPC-EA series. Is there anything I can do with that or I need another laptop? I'm using the following graphics card: 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] though the problem is not with the graphics card. I've mentioned its temperature as the highest (64°C now btw). Seems like the notebook is always overheated and I cannot control the fan speed to make it cooler. And yes, I'm using the proprietary driver ATI/AMD FGLRX graphics driver. I'm using Kubuntu 11.04.

  Read the article

• How to create (via installer script) a task that will install my bash script so it runs on DE startup?

  - by MountainX

  I've been reading for the last couple hours about Upstart, .xinitrc, .xsessions, rc.local, /etc/init.d/, /etc/xdg/autostart, @reboot in crontab and so many other things that I'm totally confused! Here is my bash script. It should start/run after the desktop environment is started and it should continue to run at all times until logout/shutdown. It should start again on reboot. Any time the DE is running, it should run. #!/bin/bash while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt kdialog --title 'The software has been updated' --msgbox "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0 I know zero about using Upstart, but I understand that Upstart is one way to handle this. I'll consider other approaches but most of the things I've been reading about are too complex for me. Furthermore, I can't figure out which approach will meet my requirements (which I'll detail below). There are two steps in my question: How to automatically start the script above, as described above. How to "install" that Upstart task via a bash script (i.e., my "installer"). I assume (or hope) that step 2 is almost trivial once I understand step 1. I have to support all flavors of Ubuntu desktops. Therefore, the kdialog call above will be replaced. I'm considering easybashgui for this. (Or I could use zenity on gnome DE's.) My requirements are: The setup process (installation) must be done via a bash script. I cannot use the GUI method described in the Ubuntu doc AddingProgramToSessionStartup, for example. I must be able to script/automate the setup (installing) process using bash. Currently, it is as simple as having the bash installer script copy the above script into /home/$USER/.kde/Autostart/ The setup process must be universal across Ubuntu derivatives including Unity and KDE and gnome desktops. The same setup script (installer) should run on Linux Mint, Kubuntu, Xbuntu (basically any flavor of Ubuntu and major derivatives such as Linux Mint). For example, we cannot continue to put a script file in /home/$USER/.kde/Autostart/ because that exists only on KDE. The above script should work for each of the limited flavors we use. Hence our interest in using easybashgui instead of kdialog or zenity. See below. The installed monitoring script should only be started after the desktop is started since it will display a GUI message to the user if the update is found. The monitoring script (above) should run without root privileges, of course. But the installer (bash script) can be run as root. I'm not a real developer or a sysadmin. This is a part time volunteer thing for me, so it needs to be easy/simple. I can write bash scripts and I can program a little, but I know nothing about Upstart or systemd, for example. And, unfortunately, my job doesn't give me time to become an expert on init systems or much of anything else related to development and sysadmin. So I have to stick with simple solutions. The easybashgui version of the script might look like this: #!/bin/bash source easybashgui while true; do if [[ -s ~/.updateNotification.txt ]]; then read MSG < ~/.updateNotification.txt message "$MSG" cat /dev/null > ~/.updateNotification.txt fi sleep 3600 done exit 0

  Read the article

• I have 2 different GEdits?

  - by aserwin

  When I load GEdit, it is different from sudo GEdit. Normal GEdit gives me Gtk warnings in the console, and ithas a different look. When I install plugins on either version, it doesn't reflect on the other. I tried removing gedit and reinstalling, but I get the exact setups (in other words, GEdit didn't actually go away when I removed it) Any advice on how I can actually remove gedit and start over? (I have tried sudo apt-get remove --purge gedit - no joy)

  Read the article

• Nvidia G96 [GeForce 9400 GT] and application graphic issues

  - by Fabio

  I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

  Read the article

• usb devices unacessible

  - by Dustin

  I have a funny thing happening with my USB devices. They are detected and show up as they should but I cannot write to them, I can read the files in them. I cannot change the Group folder access. It keeps reverting to none when I try change it. However when I start a guest session and copy a screen shot to the USB I can, but cannot in my regular administration session. Why cannot I change the option and why does it behave properly in a guest session but not normally? Anyone know how to help me out here? I am using Ubuntu 12.04, 32-bit.

  Read the article

• My Package Version Number Appears Greater Yet apt-get Doesn't Select It

  - by nutznboltz

  Backstory: It was determined that when using lxc container VMs the Nagios nrpe shutdown script when run on the host of the containers would kill the nrpe processes inside the containers. This was remediated by changing the script to use pidfiles instead of searching the process table for the nrpe process. Regrettably start-stop-daemon is a C program that resulted from translating a Perl script and it shows. There are far too many global varibles in start-stop-daemon.c and although there are some nice blocks of comments there are far to few comments that explain the intent behind variable names such as "schedule" (the string "schedule" appears in many contexts.) The manual page for start-stop-daemon strongly suggests that unless you use the "--retry" option the start-stop-daemon program may return before the process it sent a signal to actually calls exit() and terminates, however it doesn't actually state this in plain English. The obtuseness of start-stop-daemon is most likely the reason that the "fixed" version of the script includes a dubious comment indicating that sometimes the pid file has not been removed. I can easily see why someone would not understand that he left the --retry option missing. This bug also causes failures when the script is given the "restart" option; the nrpe daemon will shutdown but not start up again. Did I mention that since applying the update our nrpe servers started crashing over and over? Repairing this is why I am doing this work. I have been working on remediating the fix. You can see my current work in this PPA. Actual Question: The upstream version number of nagios-nrpe-server in lucid-updates is 2.12-4ubuntu1.10.04.1 My PPA uses this version number 2.12-4ubuntu1.10.04.1.1~ppa1~lucid1 I check the rules here and use this test program and I am lead to believe that the version number I use in my PPA is greater than the one in lucid-updates yet when I ran: sudo add-apt-repository ppa:nutznboltz/nrpe-unbreak-lp-600941 sudo apt-get update sudo aptitiude dist-upgrade The replacement package was not installed. I was able to install it using sudo aptitude install nagios-nrpe-server=2.12-4ubuntu1.10.04.1.1~ppa1~lucid1 Can anyone explain this behavior? Why didn't my version number appear greater to "aptitude dist-upgrade"? Thanks $ cat /etc/apt/preferences Package: * Pin: release a=lucid-backports Pin-Priority: 400 Package: * Pin: release a=lucid-security Pin-Priority: 990 Package: * Pin: release a=lucid-updates Pin-Priority: 900 Package: * Pin: release a=lucid-proposed Pin-Priority: 400 $ ls /etc/apt/preferences.d/ $ Should not make any difference as a PPA cannot be in any of those pockets. I went ahead and bumped the version number in the PPA to 2.12-4ubuntu1.10.04.2~ppa1~lucid1. I'll see if that makes a difference. I do notice that lintian complains: W: nagios-nrpe-server: debian-revision-not-well-formed 2.12-4ubuntu1.10.04.2~ppa1~lucid1

  Read the article

• Error: You need to load the kernel first in Grub

  - by Exeleration-G

  I have Lubuntu 11.10 installed on /dev/sda3, and Xubuntu 11.10 on /dev/sda5. A while ago, while being on Lubuntu, I made a mistake somewhere in creating a Live USB: by mistake, I installed a Live USB bootloader into /dev/sda3. This didn't result in any problem at that time. Today, I updated the kernel. I had to restart Lubuntu. In Grub, Lubuntu suddenly didn't appear anymore, and I booted automatically in Xubuntu. I tried to run update-grub and tried to use grub-customizer to get Lubuntu back in Grub, but this didn't work. I ran os-prober, but it doesn't show me Lubuntu. Then, I tried to add a new entry to /etc/grub.d/ on /dev/sda5 called 12_lubuntu. It contained the following: #!/bin/sh -e echo "Lubuntu" cat << EOF menuentry "Lubuntu" { set root=(hd0,3) linux /boot/vmlinuz initrd /boot/initrd.img } EOF After doing that, I ran update-grub and with grub-customizer, I wrote the Grub-configuration to MBR, that is: /dev/sda. Suddenly, Lubuntu appeared in Grub. I tried to launch it, but when doing this, the following message appeared: Error: You need to load the kernel first How can I make Grub start Lubuntu again?

  Read the article

• Custom session: Window does not capture full screen area by default. 12.04

  - by juzerali

  I am trying to create a custom session by creating a custom.desktop file in /usr/share/xesessions folder. Remember this is not a gnome or some other session. I have created my own application for this session, which are simple. Case 1 Chrome Browser Contents of custom.desktop file [Desktop Entry] Name=Internet Kiosk Comment=This is an internet kiosk Exec=google-chrome --kiosk TryExec= Icon= Type=Application Issue Chrome browser starts in kiosk mode but does not capture complete screen area. Some area is left at the bottom and right side of the screen. Case 2 Custom pyGTK app (Quickly) Contents of custom.desktop file [Desktop Entry] Name=Custom Kiosk Comment=This is a custom kiosk Exec=~/MyCustomPyGTKApp TryExec= Icon= Type=Application Issue My custom pyGTK app has window.fullScreen() in the code. That means it should open in full screen without the window chrome (and it does under the normal session). But that too, leaves lots of space around it. Need Help Can anyone tell me whats going on here. I think its some issue with borders as pointed out at http://www.instructables.com/id/Setting-Up-Ubuntu-as-a-Kiosk-Web-Appliance/?ALLSTEPS in Step 8 If by chance, Google Chromium is not stretched to the edges with the --kiosk switch enabled there is a simple fix. To stretch Chromium simply log in as your regular user and edit chromeKiosk.sh to not have the --kiosk switch. Then log in as the restricted user, click the wrench and choose options. Then on the Personal Stuff tab select Hide system title bar and use compact borders. Close the options screen and stretch Chromium to fit the monitor. Then go back into the options window and set it to Use system title bar and borders. After this is done, log out of your restricted user (might need to just reboot) and log into your regular user. Edit chromeKiosk.sh back to include the --kiosk switch again and Chromium should be full screen next time you log into the restricted user. If I were to use a custom pyGTK or a gtkmm app, how should I get around this issue. window.fullScreen() should occupy the complete screen area. This has to be done programmatically or in some other way that can scale. I have to deploy this on large number of machines located at different geographical areas. Doing it manually on every machine is not possible.

  Read the article

• Lenovo ThinkPad T400 and docking station

  - by hari

  Developer in me woke up this morning and asked me to fix this before Christmas. (As his Christmas gift). So, if I power on the laptop after docking it, everything works fine. But if I am working on it standalone and then try to dock it, I cannot get the display. Same way, if I undock it while working, I loose the display. Basically, I need to reboot for any docking/undocking dance to work. Questions: 1) What kind of information should I be looking for to understand the problem? 2) Where to find that information. After this, I can go and try to figure out what is going wrong.

  Read the article

• Sigmatel sound card not working on an Dell XPS m2010

  - by ralph crowhurst

  I've installed Ubuntu 11.4 on my dell xps m2010 using wubi. Then booted up and could not connect to the Internet using 3three huawei e122 usb mobile broadband (I would like this to work also). I've managed to connect through a wireless network, I went to my favorite sites and was told I needed to install adobe flash player.This what I did players run and picture is good. But there is no sound! Then I've tried to play songs in Banshee, but no sound. I have checked everything in sound preferences including test speaker, there is sound. I have sigmatel sound card. Thanks

  Read the article

• Why ubuntu 12.04 Operating System too slow..?

  - by Sumit Singh

  I was using ubuntu 10.10 from last year. every thing was Ok with that. recently I've installed Ubuntu 12.04 in place of 10.10, after installing that on my Dell laptop, I started to feel uncomfortable. It to slow event if you move mouse then its feel like i'll take 1min to move one place 2 another.. I know why this is happening, all because of 12.04 runs my CPU up to 99%-100% all over time. And there are 2-3 processes who use all the cpu.. like 1. System_Monitor 2. compiz I don't know why its use all the CPU even Other app can't able to run .. in Ubuntu 10.10 every think was Ok.. Any solution for this problem..!! | Thank's

  Read the article

• I cannot search/find any applications in the Dash on 12.04

  - by Russell

  Its been a while since I booted my Ubuntu (12.04), but when i did I had several updates (over 100) and I installed them along with rebooting. These updates seemed to mess with my video driver but I seemed to have fixed this. My problem is that my applications do not show anywhere. I can open them via terminal or if there are shortcuts (such as on the toolbar) but if I hit Super and go to Apps, there is nothing. This is true if I hit Super and search any app name nothing will come back (except for files). I need help to understand what happened! Also for some reason I can't upgrade to 12.10 (I assume because I have 12.04 and not 12.04.1, which I don't understand how to get).

  Read the article

• LibreOffice Icons are blurry

  - by Ryan McClure

  My LibreOffice icons for the individual apps are fine, they look great in both the launcher and the switcher. Yet, if I open the apps from the main LibreOffice program or if I open the document that I want to edit (And it opens its own "icon" as it always does), the icon is incredibly blurry. Here's what it looks like: On the launcher, I put the actual Calc and Impress launchers and on their left is the icons opened from a document. I know they aren't "blurry" as much as they are smaller. What should I do to remedy this? They are the same in the switcher (I can't find a way to take a screenshot of the switcher) Edit: I changed my Unity plugin from Rotated to standard, and the problem is still there; so, it isn't a Rotated bug.

  Read the article

• Why is my WordPress installation unable to create a directory?

  - by Ankur

  I am a new user of Ubuntu 12.04 64 bit and I want to test WordPress on my local PC installation. I've only installed LAMP and the latest version of WordPress for now. Further actions were creating a directory www in /home, i.e /home/www install wordpress in it. changed Apache to use /home/www instead of /var/www Apache is running smoothly & wordpress seems to be so as well. However, if try to change my background of my wordpress blog it throws an error Unable to create directory wp-content/uploads/2012/12. Is its parent directory writable by the server? Plese help me to resolve my problem.

  Read the article

• fat32 partition lock

  - by gsedej

  Hi! A am asking about problem with USB data stick (that uses fat32 file system). If you unplug USB stick without unmounting (safly remove) data may become locked when you mount USB stick another time (you can't make changes to files). If you unmount and mount partition few times, data becomes normally accessable. Problem is that I can not repeat (force) this problem now. But it has happend many times even recently. Has this been happening to somoeone else?

  Read the article

• RESIZE casper-rw

  - by Oldrifle

  UsING Toporesize-0.7.1 FLash drive is Transcent I want to add all unused space to casper-rw. Disk=3.72GB 2.68 used 1.GB casper-rw=1.95GB caspe=681MG I boot UBUNTU 11.10 64bit and see that size of HOME is about half of casper-rw It is working from flash drive ok. But I was not able to boot 11.10 64bit using USB 3.0 HDD. UBUNTU 11.10 32 bit on usb 2.0 HDD works ok ( currently multiboot with openSUSE) FUDUNTU 2012 on usb 3.0 hdd VERY FAST. Fast USB 3.0 8GB unit is ready. partitioned. Second part is labeled as casper-rw. Will try to install using partitions as base and home.No swap since I have 8GB ram. ANY SUGGESTION? Thanks

  Read the article

• Why won't cron run my sh script?

  - by Dmitry Narkevich

  Used gnome-schedule to create a script to set my headset as the fallback audio device because it keeps unsetting it when the headset gets disconnected or pc goes into sleep mode. Anyway, crontab is this: SHELL=/bin/sh PATH=/bin:/sbin:/usr/bin:/usr/sbin:/home/dmitry/bin * * * * * headsetfix /home/dmitry/bin/headsetfix is #!/bin/sh pacmd set-default-sink alsa_output.usb-Logitech_Inc_Logitech_USB_Headset_H540_00000000-00-H540.analog-stereo pacmd set-default-source alsa_input.usb-Logitech_Inc_Logitech_USB_Headset_H540_00000000-00-H540.analog-stereo It runs fine from the terminal. I've made sure it's chmodded to be executable, and "which headsetfix", run from cron, outputs "/home/dmitry/bin/headsetfix" so not sure what the problem is.

  Read the article

• How to install Awesome WM without root access?

  - by ssice

  I want to install the Awesome window manager. In the environment where I want to configure it I don't have root access. I do have a machine were I can be root (I use for this a virtual machine in my laptop). I have tried the following: $ sudo apt-get install awesome The following packages are about to be installed: awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap Do you want to continue [Y/n]? n I do now have the list of dependencies for awesome, so I downloaded them all. For that, I did the following. $ pkgs="awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap" # this is just for not writing it all ;) $ sudo apt-get install --download-only $pkgs .... $ mkdir -p /tmp/x_debs $ for pkg in $pkgs; do cp /var/cache/apt/archives/$pkg* /tmp/x_debs/; done [ copies all *.deb from my dependencies to /tmp/x_debs ] Now, I want to install the dependencies. For that, I setup a fake dpkg install in my home folder: $ mkdir $HOME/root $ mkdir -p $HOME/root/var/lib/dpkg/{triggers,updates} $ touch $HOME/root/var/lib/dpkg/{available,status} Now I tried to install with dpkg, but I could not: $ dpkg --force-not-root --root=$HOME/root --recursive -i /tmp/x_debs It failed while trying to set permissions for the packages and running chroot. As I do have root access in this machine, I ran it with privileges: $ sudo dpkg --root=$HOME/root --recursive -i /tmp/x_debs Then I had a lot of stuff (i.e., everything: dependencies and the own WM) installed inside $HOME/root. Particularly, xcb-* libraries were installed in $HOME/root/usr/lib and the awesome binary in $HOME/root/usr/bin/awesome. If I try to execute awesome as is I get as an error that libraries could not be loaded. That's normal, as they are not in /usr/lib nor in /lib. So I ran export LD_LIBRARY_PATH=$HOME/root/usr/lib:$HOME/root/lib:${LD_LIBRARY_PATH} and awesome would try to load. However, I could not make gdm to run awesome within gnome or replacing it. I did it this way so I can copy everything in my $HOME/root folder, paste it in the other machine and have it running. Is there any other way (to have less wasted space maybe..) to do this? How can I tell gdm to exec awesome without root access?

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >