Search Results

Search found 8173 results on 327 pages for 'front panel'.

Page 167/327 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

  • Migrate reports from MS Access to OOo Base

    - by John Gardeniers
    I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

    Read the article

  • HDMI output issue in Ubuntu

    - by xsznix
    Hi, I am using Ubuntu 10.04 on a HP notebook with a nVidia GT 130M graphics card. Whenever I connect a HDTV using the HDMI output and set all of the settings in the nVidia Control Panel, it will output to the HDTV, but cut off about 24 pixels on each side. Sometimes (but not often), it will work properly (display the entire screen), but I cannot get it to work thus consistently. I have tried using resolutions of 1920x1080, 1360x768, 800x600 with two HDTVs of different brands, with and without forcing full GPU scaling, with and without syncing to VBlank (what is this?), etc., and also using a Linux Mint 9 computer with integrated Intel (X4000-ish, don't remember exactly) graphics. The problem persists no matter what, but only with HDMI output (VGA works fine). The same computers works fine with HDTVs in Windows. Any ideas?

    Read the article

  • Remove LCD Stand for Wall Mounting - FSM-270YG

    - by Benjamin Chambers
    Based on Jeff Atwood's post on Coding Horror, I ordered one of these monitors, and I've been absolutely loving it. However, I recently (i.e. today) took the next step in monitor-y goodness and fastened the sucker to an articulated wall mount. Unfortunately, I can't figure out how to remove the stand. The flat portion comes off with a single screw, but the leg it fastens to has no apparent method of removing it. Has anyone figured out a trick for removing these, so they don't just stick out below the screen? Should I remove the screws from the backside of the screen, and look for an internal connection to remove? Or just give up and live with it? (After all, it's a great display, it's floating in the air in front of me, and the stand leg is only a minor annoyance).

    Read the article

  • JSP / Tomcat / Apache setup overview on Fedora Core

    - by Richard T
    Hi Folks, For someone with so much Java experience, boy do I feel clueless - thanks in advance for your help in my grocking the present (Feb, 2010) JSP environment. Here's what I am hoping to learn: Do I understand correctly that most people use Apache to "front-end" their Tomcat servers, such that Apache "talks" directly to web clients and "proxies" Tomcat servers? Do I understand correctly that Apache isn't capable of serving JSP directly but requires a server (like Tomcat)? Is there an RPM package for Fedora Core so I don't have to build one myself? Or, does Fedora Core's package installer do a good job on this one from source code? (Some do, some don't!) While I'm here asking questions; Does Tomcat come with a working example that one can start hacking on as a way to get started quickly? If not, got a good suggestion? Thanks folks, RT

    Read the article

  • how to change port number of Apache server in windows OS

    - by jesop
    I have installed xampp control panel and Apache 2.2 on windows XP when I type http://localhost/ gives me page which says It Works! Now, I want to change the port number 80 to some other number How to change it ? in how many files does it needs to be changed ? dose it require to restart the system to change to take effect ? Note: I have changed port number in C:\xampp\apache\conf\httpd.conf in two places where it says Listen 80 and ServerName localhost:80 Pls help, thanks.

    Read the article

  • How can I make pref changes via defaults command happen immediately?

    - by user329863
    There are many changes to Finder, Dock, etc. preferences that you can do with the defaults command, i.e. defaults write com.apple.finder AppleShowAllFiles -bool yes However, in order to make the changes take effect, you must quit and relaunch the target app: osascript -e 'tell app "Finder" to quit' When the Finder is quit like this (rather than using the killall command, as some published sources advise), it saves and restores its window placements and disk locations (but not the forward-and-back history associated with each window). Is there some way to make such changes take effect immediately, without quitting the target app? After all, when you make changes in the Dock preference panel, they take effect instantly in the Dock application. Is there some Apple Event that I can send to make the change or make the app reread its prefs?

    Read the article

  • squid running out of sockets

    - by drscroogemcduck
    I have a setup where squid sits in front of a java server and acts as a reverse proxy. Recently i've load tested the site and if i fire 100 threads at it each making a request using jmeter i start getting errors in my load test tool like 'no route to host' even though the load test tool and the server are on the same machine. if i run the following command where port 82 is the port my squid server is running on: netstat -ann | grep 82 | wc -l i get 22000 or something and most of them are in TIMED_WAIT. i'm thinking that maybe the huge number of sockets in the TIMED_WAIT state are starving the box of resources.

    Read the article

  • Can someone explain the fascination with twitter.com? [closed]

    - by raven
    I don't get it. WTF do people see in this? I'm trying to figure it out, but I can't. Have you seen what people post? Let's use Jeff Atwood as an example. What does he gain by posting (with disturbing frequency) all those, well... posts (I find the term "tweets" disgusting). What is a "follower" supposed to get from these posts? I know many of you are thinking, "Just don't use it!". Yes, I know I don't have to use it, but it's like asking me not to look at the space shuttle that just crashed in my front yard. The rest of the world thinks it's the greatest thing since sliced bread. I'm just trying to understand what people see in it.

    Read the article

  • Monitor sleep in Windows XP does not work. Is there an add on to force it?

    - by bert
    I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

    Read the article

  • Dropdownlist post in ASP.NET MVC3 and Entity Framework Model

    - by Josh Blade
    I have 3 tables: RateProfile RateProfileID ProfileName Rate RateID RateProfileID PanelID Other stuff to update Panel PanelID PanelName I have models for each of these. I have an edit page using the RateProfile model. I display the information for RateProfile and also all of the Rates associated with it. This works fine and I can update it fine. However, I also added a dropdown so that I can filter Rates by PanelID. I need it to post back on change so that it can display the filtered rates. I'm using @Html.DropDownList("PanelID", (SelectList)ViewData["PanelDropDown"], new { onchange = "$('#RateForm').submit()" }) for my dropdownlist. Whenever it posts back to my HttpPost Edit method though, it seems to be missing all information about the Rates navigation property. It's weird because I thought it would do exactly what the input/submit button that I have in the form does (which actually passes the entire model back to my HttpPost Edit action and does what I want it to do). The panelID is properly being passed to my HttpPost Edit method and on to the next view, but when I try to query the Model.Rates navigation property is null (only when the post comes from the dropdown. Everything works fine when the post comes from my submit input). Get Edit: public ActionResult Edit(int id, int panelID = 1) { RateProfile rateprofile = db.RateProfiles.Single(r => r.RateProfileID == id); var panels = db.Panels; ViewData["PanelDropDown"] = new SelectList(panels, "PanelID", "PanelName", panelID); ViewBag.PanelID = panelID; return View(rateprofile); } HttpPost Edit: [HttpPost] public ActionResult Edit(RateProfile rateprofile, int panelID) { var panels = db.Panels; ViewData["PanelDropDown"] = new SelectList(panels, "PanelID", "PanelName", panelID); ViewBag.PanelID = panelID; if (ModelState.IsValid) { db.Entry(rateprofile).State = EntityState.Modified; foreach (Rate dimerate in rateprofile.Rates) { db.Entry(dimerate).State = EntityState.Modified; } db.SaveChanges(); return View(rateprofile); } return View(rateprofile); } View: @model PDR.Models.RateProfile @using (Html.BeginForm(null,null,FormMethod.Post, new {id="RateForm"})) { <div> @Html.Label("Panel") @Html.DropDownList("PanelID", (SelectList)ViewData["PanelDropDown"], new { onchange = "$('#RateForm').submit()" }) </div> @{var rates= Model.Rates.Where(a => a.PanelID == ViewBag.PanelID).OrderBy(a => a.minCount).ToList();} @for (int i = 0; i < rates.Count; i++) { <tr> <td> @Html.HiddenFor(modelItem => rates[i].RateProfileID) @Html.HiddenFor(modelItem => rates[i].RateID) @Html.HiddenFor(modelItem => rates[i].PanelID) @Html.EditorFor(modelItem => rates[i].minCount) @Html.ValidationMessageFor(model => rates[i].minCount) </td> <td> @Html.EditorFor(modelItem => rates[i].maxCount) @Html.ValidationMessageFor(model => rates[i].maxCount) </td> <td> @Html.EditorFor(modelItem => rates[i].Amount) @Html.ValidationMessageFor(model => rates[i].Amount) </td> </tr> } <input type="submit" value="Save" /> } To summarize my problem, the below query in my view only works when the post comes from the submit button and not when it comes from my dropdownlist. @{var rates= Model.Rates.Where(a => a.PanelID == ViewBag.PanelID).OrderBy(a => a.minCount).ToList();}

    Read the article

  • Apache Reverse Proxy server and SSL NTLM SharePoint

    - by user50211
    Hi, I'm trying to set Apache as proxy server to an internal SharePoint server. I have previously configured Apache to run as a proxy server to export internal webpages and web applications. However, the Sharepoint is using SSL and NTLM authentication, and this is new to me :( I have tried many options, the traffic seems to be forwared as I get the authentication popup window, but when I insert the user/pass, I get back to the same popup window. Anybody has configured Apache to do so? Here is a part of my httpd.conf: <VirtualHost *:443> ServerName repository.out.com SSLProxyEngine On RequestHeader set Front-End-Https "On" ProxyRequests Off ProxyPreserveHost On ProxyPass / https://sharepoint.in.com ProxyPassReverse / https://sharepoint.in.com CacheDisable * SetEnv force-proxy-request-1.0 1 SetEnv proxy-nokeepalive 1 ErrorLog logs/jlanza_log CustomLog logs/jlanza_log common </VirtualHost>

    Read the article

  • LCD problems: brightness / contrast blown out, can't bring up menu

    - by davr
    Yesterday, when I turned on my LCD monitor, the colors were very very bright. It looks as if someone had gone into the monitor on-screen-display and turned up brightness & contrast all the way to the max. Colors were washed out, and it's almost painful to look at. So I tried to go into the menu and see if the settings were wrong somehow...and I found that I cannot bring up the menu. All the buttons on the front of the monitor now do nothing, except the power button. I was able to go into my graphics card settings, and turn the brightness way down to compensate, so it's at least usable for now, but it's not quite right, there is definitely some loss of color resolution or something from the two extreme settings canceling each other out. Any ideas what kind of failure in the LCD might cause this? According to the control panel, the model number is: KL2490DW-D It's a 24" 1920x1200 with the brand "synaps".

    Read the article

  • Mouse settings/properties dialog box won't open in Windows 7

    - by ymasood
    Hi, I have a problem trying to open my computer's mouse settings by either going to the command prompt and typing, 'control mouse', 'main.cpl' (as researched online) or simply by trying to go to the Control Panel and clicking on 'Mouse' under Hardware and Sound section. I have also tried running cmd as Administrator and trying the above commands but that is of no help. Lastly, if I search for 'mouse' and click 'Mouse' from the Windows search bar, that doesn't work either. In the past I had bought and installed Microsoft Wireless Mobile Mouse 6000 software and have just now bought and installed HP's Wireless Comfort Mobile mouse. Any help in this regard is highly recommended. I won't be able to restore or reinstall my laptop since it's a heavy use machine. Thanks! Yasser

    Read the article

  • Keyboard mapping issue in Virtualbox on Mac OS

    - by stanleyxu2005
    I run Windows 7 as a VM in VirtualBox on my MacBook Air (using OS X 10.7). If I do not shutdown the VM but save its machine state. The keyboard will behave strangely after resuming. It seems the Windows Logo key is always hold. When I type the key 'u', the Control Panel will be shown. I tested on a real Windows 7, the same dialog will be shown when I press Win-key and 'u'. When I type the key 'e', the Explorer will show up, some as press Win-key and 'e' on a real Windows 7. If I click 'Restart' from the Start menu of Windows 7, after restarting the VM, the keyboard works again. I think there are some conflicts with keyboard driver in VM. It is quite annoying, usually I usually close a VM by saving its machine state, not shut the OS down. Is there any way to solve this problem?

    Read the article

  • What's the most unsound program you've had to maintain?

    - by Robert Rossney
    I periodically am called upon to do maintenance work on a system that was built by a real rocket surgeon. There's so much wrong with it that it's hard to know where to start. No, wait, I'll start at the beginning: in the early days of the project, the designer was told that the system would need to scale, and he'd read that a source of scalability problems was traffic between the application and database servers, so he made sure to minimize this traffic. How? By putting all of the application logic in SQL Server stored procedures. Seriously. The great bulk of the application functions by the HTML front end formulating XML messages. When the middle tier receives an XML message, it uses the document element's tag name as the name of the stored procedure it should call, and calls the SP, passing it the entire XML message as a parameter. It takes the XML message that the SP returns and returns it directly back to the front end. There is no other logic in the application tier. (There was some code in the middle tier to validate the incoming XML messages against a library of schemas. But I removed it, after ascertaining that 1) only a small handful of messages had corresponding schemas, 2) the messages didn't actually conform to these schemas, and 3) after validating the messages, if any errors were encountered, the method discarded them. "This fuse box is a real time-saver - it comes from the factory with pennies pre-installed!") I've seen software that does the wrong thing before. Lots of it. I've written quite a bit. But I've never seen anything like the steely-eyed determination to do the wrong thing, at every possible turn, that's embodied in the design and programming of this system. Well, at least he went with what he knew, right? Um. Apparently, what he knew was Access. And he didn't really understand Access. Or databases. Here's a common pattern in this code: SELECT @TestCodeID FROM TestCode WHERE TestCode = @TestCode SELECT @CountryID FROM Country WHERE CountryAbbr = @CountryAbbr SELECT Invoice.*, TestCode.*, Country.* FROM Invoice JOIN TestCode ON Invoice.TestCodeID = TestCode.ID JOIN Country ON Invoice.CountryID = Country.ID WHERE Invoice.TestCodeID = @TestCodeID AND Invoice.CountryID = @CountryID Okay, fine. You don't trust the query optimizer either. But how about this? (Originally, I was going to post this in What's the best comment in source code you have ever encountered? but I realized that there was so much more to write about than just this one comment, and things just got out of hand.) At the end of many of the utility stored procedures, you'll see code that looks like the following: -- Fix NULLs SET @TargetValue = ISNULL(@TargetValue, -9999) Yes, that code is doing exactly what you can't allow yourself to believe it's doing lest you be driven mad. If the variable contains a NULL, he's alerting the caller by changing its value to -9999. Here's how this number is commonly used: -- Get target value EXEC ap_GetTargetValue @Param1, @Param2, OUTPUT @TargetValue -- Check target value for NULL value IF @TargetValue = -9999 ... Really. For another dimension of this system, see the article on thedailywtf.com entitled I Think I'll Call Them "Transactions". I'm not making any of this up. I swear. I'm often reminded, when I work on this system, of Wolfgang Pauli's famous response to a student: "That isn't right. It isn't even wrong." This can't really be the very worst program ever. It's definitely the worst one I've worked

    Read the article

  • Reboot VPS by reaching memory limit

    - by Ali
    When a server uses memory more than available RAM, the system will shut down the virtual machine. Then, it is only possible to boot from outside (VPS control panel, e.g. vePortal or SolusVM). However, it should be possible to plan a reboot before possible shut down. What is the best practical method to check the used memory, and reboot the system upon reaching e.g. 90% of the allowed RAM? Is there a common program or script to do so? I am using Debian/Ubuntu.

    Read the article

  • USB driver problems (Windows 8.1)

    - by HelloWorld
    Every time I turn on my laptop the USB ports don't work and the drivers have an error. In order to fix this I'm forced to start the Device Manager, uninstall all the USB drivers, open the Control Panel, click Find and fix problems (under System and Security), click Configure a device (under Hardware and Sound) and then when that window pops up just hit Next until I can see my USB drivers reinstalled and working in the Device Manager window under Universal Serial Bus controllers. I found this way to fix it but I would like a permanent solution so that I don't have to do this every time I turn on the machine. Any ideas? When I bought the machine it had Window 7 installed but I later upgraded it to Windows 8.0 and then 8.1 after that.

    Read the article

  • CNAME records query

    - by user223346
    I have a control panel with Enta which lets me mess with my DNS settings. So i have added a CNAME record to point to an IP address. Assume my website is called: www.example.com I have added a CNAME like this: subdomain.example.com -> This works fine. But now i wish to add another CNAME for the following to point to the same IP: www.subdomain.example.com This is proving to be not possible as it says i cant add "." in the name when i try to create the record? Any help?

    Read the article

  • I cannot install flash player, I am getting 1603 exit code

    - by Naz
    I am trying to install flash player silently, using a powershell script. I do not think it is being installed. I looked under "control panel-uninstall programs" I don't see flash player listed there. Also, I am printing the exit code for the process and it prints 1603 exit code, which is "fatal error during installation" As an experiment, I double click on the flash player .msi file, and it gave me 1722 error " Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. "

    Read the article

  • What does drag lock do in boot camp?

    - by MacBookNewb
    In the control panel for my mac book pro I have an icon called Boot camp. Inside there and inside the trackpad tab I have an option called drag lock. It sounds useful to me as I sometimes find it awkward dragging long distances. I can't figure out how to use it though. Can someone explain how I can find out more info on drag lock? I can't find any references on google. Also even without the dragging option on I can drag.

    Read the article

  • homegroup administrator user no longer exists

    - by Beninja
    I had a PC with windows 7 that was the homegroup administrator for my network. I recently upgraded to windows 8 I went to homegroup in control panel and saw that the original homegroup was never removed. It says to talk to the administrator on and obtain the password to join the homegroup. I need to create a new homegroup but I cant unless I somehow remove the old one. And I cant do that because the user that had rights to the old one no longer exists. Please help!! Ben

    Read the article

  • How to make the start menu find a program based on a custom keyword?

    - by Pierre-Alain Vigeant
    I am searching for a way to type a keyword in the start menu Search programs and files field and that it will return the application that match the keyword. An example will better explain this: Suppose that I want to start the powershell. Currently what I can type in the search field is power and the first item that appear is the 64bits powershell shortcut. Now suppose that I'd like ps to return powershell as the first item of the search list. Currently, typing ps return all files with the .ps extension, along with a control panel options about recording steps but not the powershell executable itself. How can I do that?

    Read the article

  • What is this Cable for? 4 Pin to 2 Pin from Riser to Perc in Dell R410

    - by Kyle Brandt
    I got a new raid card for a R410 server since the S300 that came with it doesn't support raid with Linux (No work around for this if SAS from what I could find). Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. The cable only has two wires, one black and one red. What is this cable for? My guess would be maybe LED status for the front panel or something like that, but I am just guessing....

    Read the article

  • Color Calibrate Dual Monitor XP SP2

    - by Laramie
    This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

    Read the article

  • compatible laptop screens for dv6-1050us

    - by eran
    i have a laptop with 16'' wide screen, but the screen is broken and i want to buy only the screen and replace it.. my laptop is: HP Pavilion dv6-1050us what i know about the screen is that it's model number 512357-001 "16inch widescreen BrightView BV display panel IMR, with web camera and microphone". I did find some screen which seems to be the one but i'm not sure and dont want to spend money for the wrong screen, can any one help please? I search on e-bay for a compatible screen and left with a few questions.. There are some sceens which can be compatible.. they dont mention the specific computer models compatibles.. is all dv6-1000 of hp has the same screen?are all of them compatible? thanks for you help Eran

    Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >