Search Results

Search found 5389 results on 216 pages for 'picture and fax viewer'.

Page 168/216 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Why does Windows 7 have three system partitions?

  - by Ben

  I am using Windows 7, and I wanted to make a System image (using Windows 7), but Windows 7 checked three partitions as System (100 MB + C (install partition) + D (my partition for my files, all programs are installed at C)). I don't want to backup my D partition, but that is not really the point. I don't want Windows messing with my other partitions and making them system. Is there a way to limit Windows 7 just to partition C (install partition)? If there is no way to stop Windows from making other partitions system, can I at least delete the files that make partition D system? PS: All these three partitions are on one physical disk, partitions from other disks aren't treated as System. FACTS: desktop PC, no OEM partitions, I personally have installed Windows 7 (many times) on the C partition. Why is my D partition checked as System partition when I try to create a System Image (using Windows 7 Ultimate built in tool), even though Windows (and all the software) are installed on the C partition? Is there a way to make D "normal" or non-system partition? Here is a picture of how it looks like if I try to create a system image. Once again, why is D also a system partition?

  Read the article

• Users and Groups management on 7 Home Premium

  - by AviD

  Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

  Read the article

• Http header 304 and caching?

  - by Royi Namir

  Our company uses these settings( don't ask me why) - for every request they want a new request from server. this is an intranet system which uses only IE. They defined it in : We also have windows authentication NTLM in the iis7. I have 2 questions please. Question #1) when the browser make a request ( css ) : (leave the 401 response for now - this is how ntlm works) He is requesting it with if-modified-since header. why is he adding this header ? How can I configure it ? why doesn't he use the settings from IE and try to download it each time - as I showed in the first picture ? Question #2) The response ( after ntlm negotiation) for that was : Response with Not-modified which is 304 header. and I assume its because we sent the request with the if-modified-since header. But there is a problem. He is actually tells me to download from my cache. But I told him explicitly in the IE settings - not to load from cache. Wham am I missing here ? Thanks a lot.

  Read the article

• Java website on Tomcat PHP website on Apache - how to get PHP web pages into Java web pages?

  - by Venkat

  We have a Java web application deployed on Tomcat. We also setup Apache and mod_proxy_ajp to route web requests (port 80/443) to Tomcat. We would like to deploy a PHP application on the same Apache server - probably under a subdirectory (/var/www/ourapp). Now we would like to access & display web pages from PHP application within web pages generated by Java application. Planning to implement Single Sign-on as well. Example: Web page from java has (JQuery Tabs) and we like to display the PHP web page within a tab while all other HTML comes from java application. Can you please give a overall picture of how to proceed about this? Mainly 1. how we should install/setup our PHP application on same Apache server which is used to route web requests to Tomcat? i.e. either setup sub domain or install in sub directory 2. How to bring PHP pages into present web pages (generated by java). Can we use AJAX requests or should go for Java PHP Bridge/ Querces such applications? Thank you for your time in advance. Regards.

  Read the article

• Good Enough Failover Strategy for DNS / MySQL / Email

  - by IMB

  I've asked and read a lot questions regarding DNS failover but the more I read the more complicated it becomes, some people say it's good enough some say it isn't. No clear answers from what I read. I was wondering if we can set it straight once and for all, at least for the requirements of most websites out there. Right now let's assume the following: We don't need really need load-balancing, what we need is a failover solution. We are running a website based on LAMP on a VPS. We need to make sure that the Web Server, MySQL, Email are always accessible if not 99%. Basically here's my idea and questions about it: Web Server: We need at least one failover server (another VPS on a separate data center). Is DNS Failover via Round Robin good, if not, what's the best? And how do you exactly implement it? How do you make the files you upload/delete on Server A is also on Server B? MySQL: I've only read a brief intro to MySQL replication and I assume that I can replicate Server A to Server B and vice versa on the fly right? So just it case Server A fails and Server B is now running, it will continue to work and replicate to Server A when it becomes available. So in essence Server B is now the primary server, and will later on failover to Server A, should a failure happen again. Email: If we are gonna use DNS Failover, using webmail or relying on emails stored on the server is probably not a good idea right? Since some emails might be on Server A while some might be on Server B? I assume a basic email forwarder to a 3rdparty is good enough (like Gmail for example) to ensure all emails are kept in one place. Here's a basic diagram for a better picture: http://i.stack.imgur.com/KWSIi.png

  Read the article

• Is there a way to force the monitor to power off in Windows 8?

  - by Rune Jacobsen

  I have googled this a bit and looked at powrprof.dll and PsShutdown but I haven't found a way to do exactly what I want to do. You know that power save option that lets Windows turn off your monitor(s) if you haven't touched the system for x amount of time? Well, I have a PC that needs to be on most of the day (and night), and I have to watch it much of the time, so I can't have a short timeout for automatically turning off the monitor. However, once I leave it for a few hours (happens at varying times of the day), I would like to be able to issue a command that puts the computer in this mode. Not sleep mode, not hibernate mode. Monitor off, that is all. I realize of course I could just turn the physical monitor off. That is not what I want. This Dell monitor takes forever to display a picture from a cold state. If it is turned off by the computer not sending a signal - not so bad. Is there any way for me to do this? As mentioned, the OS can do it, so I would find it really useful if I could do it too. :)

  Read the article

• Deleted printers keeps coming back - and multiply

  - by MojoDK

  My users are on 2012 R2 RDS Session Host servers. I've used "Deploy Printers" (from Print Manager) to deploy 4 printers. The last week, I've had a lot of problems where users can't print. If I deleted the printer and added it again, they could print just fine. Now I've removed all printer deploying from GPO - and I have no printers in any login scripts. I did a gpupdate /force, but all the 4 printers are now listed 3 times... If I delete the printers and log off and back on, all the printers are popping up again. Sigh! This is driving me nuts. This script doesn't show any of the "SVFREJA" printers... Set objWMIService = GetObject("winmgmts:\\.\root\cimv2") Set colPrinters = objWMIService.ExecQuery ("Select * From Win32_Printer") If colPrinters.Count <> 0 Then 'If there are some network printers Dim s s = "" For Each objPrinterInstalled In colPrinters ' For each network printer s = s + objPrinterInstalled.Name + chr(13) Next msgbox s End if It gives me this result... (sry for the big picture) My problem is not with the "redirected" printers, my problem is that I have several printers with the same name (on SVFREJA) and I can't get rid of them. Any idea why I can't get rid of the "ophaned" printers??

  Read the article

• Can't reliably ping 6224 router from directly-attached system

  - by David Mackintosh

  OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

  Read the article

• Notebook display problem (multiplication)

  - by SubniC

  Hi, I'm having some troubles with the display of a LG E500 notebook. The thing is that without any known reason the display starts to show the screen divided in eigth parts and each part show the display image as if I had a matrix of eigth displays :) I thought it could be some kind of refresh rate problem or driver related, but it is happening at boot-up as well and the BIOS. I got the computer completely unassambled yesterday and I check all the wires and connectors looking for something broken or unconected, but without luck... You can see a picture here of the problem (sorry for the low quality, but I think it illustrate the problem. EDIT 1: I uploaded a new pictrue, here you cans ee the problem better :) There are three horizontal lines that you can see just between the windows. You can see the grey line at the first moment you turn on the computer and the after the duplicated screens show up just like if they where arranged over a grid (over the horizontal lines...) I hope it makes any sense. Do you know what could be happening? or can you tell me what would you do? Thank you very much for your help.

  Read the article

• I need a driver for my Cardbus USB 2.0 card

  - by Carl

  The picture and details of the card are here: http://www.ht-link.com/en/ProductView.asp?ID=106 The Windows drivers for this don't work right. I tried them on my previous laptop, and then installed the ones off their included CD. (Note that the systems requirements includes a CD-ROM drive...) I have a new laptop, and lost the CD. The website that lists the drivers is broken - the download links don't work. It is here: http://www.ht-link.com/en/DownView.asp?ID=10 I need the very first link - The Win XP drivers for the HT-112NEC. The company does not reply to my e-mails. I've tried searching Google for other sources for the driver (I didn't bother with those sites that want me to install driver detection software or create a log-in for their site). [Here's the problem I am getting using the drivers Windows XP SP3 installs: When I plug in my USB 2.0 hard-disk adapter, a USB Mass Storage Device entry is added in the Device Manager, but there is no entry under Disk Drives, and a drive letter is not assigned, so I can't access the driver. Like I said, this card didn't work without their special drivers on my other laptop, either.]

  Read the article

• Server 2008R2 Server Manager Roles and Features won't refresh or allow addition of new roles or features

  - by MattChorba

  I have a standalone DC in an isolated lab. I have installed the SUR tool and found no errors. I ran SFC and found no errors. I have attempted to install Windows Backup feature using Powershell, but received the same error about the computer needing to be restarted. Powershell cmdlets will list all of the installed roles and features. The rest of Server Manager works without problems. What can I do to get Server Manager Roles and Features working properly again? Picture of Error: CheckSUR.log: ================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 13.0 2011-11-28 13:20 Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 413 No errors detected (w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache CheckSUR.persist.log: ================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 13.0 2011-11-28 13:20 Checking Windows Servicing Packages Checking Package Manifests and Catalogs Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 413 No errors detected (w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache

  Read the article

• Why is my Mac not displaying anything to my LCD tv using HDMI?

  - by Pure.Krome

  Hi folks, I've got an iMac desktop computer. Love it. I wish to connect it to my LCD TV using HDMI. There is no HDMI output on the iMac so i had to buy one of these bad boys :- so now I can output video (via the mini Display Port) and sound (via USB) through this box, to my LCD. Works great ... with a single direct cable. I have another 3 or 5 metre cable inserted into my wall, so i do not have to have a silly hdmi cable floating in the air between my iMac and my LCD TV. When I do this, there is no picture. To better explain all of this, i made a quick video explaining my problem in detail, so you can exactly see what is going on/wrong. I've also tried changing the output format for the TV from 1080i down to 720p and even lower .. incase the cable in the wall doesn't allow 1080i. here's the video with the full explanation :- http://www.youtube.com/watch?v=ZkKRKnRIh6Q (NOTE: I incorrectly said in the video that the hidden wall cable is 10 metres long. me == fail. It's 3m or 5m...). Can someone please watch it and suggest some ideas to getting it working?

  Read the article

• Using keyboard disables touchpad left button for a second on Acer laptop in Windows 8.1

  - by Robert Kilar

  The problem is present in the whole system not only in games: desktop, chrome, games, everywhere. When I press any "input key" on a keyboard for example in desktop I can't select the file by left mouse button OR by tapping the touchpad for about one second(right button works immediately). Later on the LMB works well. There is NO delay, button is just deactivated for a second. In games that means that when I run I cannot shoot for example. When I switched LMB and RMB functions in windows control panel still the LMB is getting disabled and RMB works fine. By "input key" I mean letter or a number, keys like Alt, CapsLock, Ctrl does not affect touchpad. I do not remember that problem when I used Windows 7. USB mouse works like it should. The problem existed when I was using Elantech touchpad driver and after I uninstalled it and used Windows 8.1 generic driver. EDIT I installed the Elantech drivers and set values to 0 at every disable... key. But the problem is still present. EDIT 2 THE LAPTOP IS Acer V3-571G I have turned off disabling function in touchpad but it did not fix it. I know that touchpad is NOT broken down. Turned on the animated touchpad icon of elantech drivers and put it on the task bar(on a picture) When I type the letter and press the LMB the dynamic icon displays the click but it is ignored.

  Read the article

• xrandr fails when 3rd monitor has higher resolution

  - by Pi3cH

  I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

  Read the article

• Disable internal display on Macbook Pro without closed lid mode?

  - by jslaker

  I have an early 2007 Macbook Pro running 10.5 that I've recently set up on a KVM with my primary desktop system. The problem I've run into is that I have a 20" 1680x1050 LCD, and OS X only provides options to mirror at the resolution of the built-in display or to span. Since the built-in display runs at 1440x900, this leads to running my LCD at non-native res and a fuzzy picture. There isn't any option that I can find to simply disable the built-in display entirely and run the external LCD at its native resolution. I am aware of closed lid mode, but the MBP was disassembled while in storage for about 6 months (took it apart to pull the HDD) and the cable to the touchpad, which controls the sleep sensor was damaged, meaning closed lid mode won't work. I've looked into replacing the cable, but the cheapest I've been able to find it is $75-100, and I'm trying not to invest any more money into this computer as it also has a completely dead battery and a few other minor problems. I've found the app SwitchResX which appears to allow you to do what I need, but it has a lot of functionality I don't need and a ~$20 registration charge attached to it. An odd set of circumstances, I'm aware, but I was hoping somebody might know of an OS hack that would let me just disable the internal display and be done with it. :)

  Read the article

• How do I send e-mails with attachments to a Microsoft WebTV user?

  - by Petr 'PePa' Pavel

  my friend uses Microsoft WebTV (e-mail address ends with @webtv.net) and I'd like to send him an e-mail with a picture attached to it. We went through a series of attempts one of which ended up a success, all others a failure. He just can't see my e-mail in his mailbox, when it contains an attachment. E-mails without attachments always go through all right. What seemed to help in the first successful case, was that he added my e-mail address to his address book and my e-mail suddenly showed up. Seemed to have been delivered before but hidden. He kept my address in his address book however, it didn't help with the following trials. He did look into his junk folder, nothing there. I made sure the file name contains no spaces. It's a regular jpeg, named something-like-this.jpg I downsized it to have only about 50k, as I've read somewhere that that's a limit. I actually doubt this piece of information, because I think the successful attempt was larger. webtv.net contains zero information. I watched their video demo for the e-mail client, so I at least know how the user interface looks like. I've never laid my hands on the real thing. I'm an advanced user myself (a programmer) but I can't wrap my mind around this. He on the other hand, is a very technically inexperienced user and because he's half way across the globe, I can't come and look over his shoulder. He doesn't have a computer, afaik there's no way I could see what he sees. Any ideas on how to debug this? Thanks for your time, guys. P.S. I can't tag this "webtv" because such tag doesn't exist yet and my reputation is too low, sorry.

  Read the article

• Determining physical location of data on a disc

  - by Synetech

  Does anybody know of a way to find out where, physically on a CD or DVD a given piece of data would be located? I am trying to watch a DVD at the moment, and am about half-way through, but it keeps dying at a specific spot in the film, presumably because of a scratch. I have a repair kit, but I don’t know where to focus my repair because there are several scuffs and scratches on the disc and I have no way of knowing which one is causing the issue. Obviously, cleaning all of them is inadvisable because not only does it waste the consumable materials in the kit, but not all of them are a problem, and by working them, some may become unreadable. Moreover, just because I am half-way through the movie does not mean that it would be half-way from the hub to the edge for several reasons: Discs have more data towards the outer edge than the inner edge (circles are more mathematically complicated than rectangles) The disc is not completely filled up (and even if it were, the movie itself would be be using it all, there are extras and such) Because in this particular case it is a commercial DVD, it is also dual-layer which further complicates manual determination As such, I am trying to find a program that can let me identify a file (or part thereof), cluster, etc. and show me a picture of where on the CD/DVD it would be located. That way, I can look at the disc and fix any scratches that correspond to that distance from the hub. For example, the image below might indicate where on a disc a couple of files or range of clusters would be located, so by looking for anomalies in those areas (rotating as necessary), the correct one can be identified. I’m sure it can be done since at least one form of copy protection (DPM) uses it and DVD-lab Pro includes a “DVD Topology” feature to do this.

  Read the article

• What may be wrong with String::ToIdentifier::EN tests?

  - by wk01

  I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

  Read the article

• Proxmox: VMs and different public IPs

  - by Raj

  I have a server which has two NICs and both are directly connected to internet. I have five different public IP addresses available for the VMs. The host machine (Proxmox) doesn't need to use any (it'll use a private IP and that's all) but will have internet connection. I've gone through the Proxmox documentation and I'm not able to understand the big picture to set up the right network configuration for my needs. In short, what I have is: One server (Proxmox, host machine) On that server, 5 VMs are created 5 public IP addresses available (one for each VM), let's say: 80.123.21.1, 80.123.21.2, 80.123.21.3, 80.123.21.4, 80.123.21.5 What I have now for the host is the following: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.1.101 netmask 255.255.255.0 bridge_ports eth0 bridge_stp off bridge_fd 0 auto vmbr1 iface vmbr1 inet manual It can be reached from the internal network, so that's OK. It has internet connection, which is also OK. vmbr1 is going to be used by the VMs. Each VM will have its own IP on his network interfaces configuration file. For some reason, VMs will not have internet and they won't be able to have public IP address. If I use NAT, it will work correctly, but they will not use the public allocated IP addresses for them. Am I missing something?

  Read the article

• Intel HD Graphics vs NVIDIA Quadro FX 380 PCI-E

  - by Michael

  I recently purchased an Acer Veriton which has an i5-650 processor, Windows 7 Pro (64 bit) and Intel HD Graphics listed as the video card. I also purchased a PNY nVIDIA Quadro FX 380 PCI-E card for improved picture and home video viewing and editing. I have already replaced the original 300 wattt power supply to a 430 watt Antec Truepower I had on hand and boosted the RAM to 8 gigs from the original 4. Question 1) Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card? This card was on sale for $115. If I am getting improvement then I need to ask another question. Question 2) Instructions for the Quadro installation are as follows... 1--Uninstall the existing VGA driver. -Remove the existing Display Driver via "Add or Remove Porgrams". -Shut down your computer. 2--Remove your Existing Graphics Board (or Disable Integrated 3D Graphics Controller). skipping instructions on how to remove existing graphics board -Systems with integrated (also know as on-board) 3D graphics may require you to disable the integrated 3D graphics system. Consult the owners or vendor manual that came with your PC on how to properly do this. So is the Intel HD Graphics considered a 3D graphics controller? If so should I just contact Acer or can anyone give me instructions? Thanks in advance for any help.

  Read the article

• Creating a Logical network diagram

  - by user273284

  Im a student and I have been assigned the task of creating a logical network diagram for the following scenario There are 2 buildings, the first is the head office and the second is the branch. The data centre is in the head office, it contains domain controller, mail server, file server and a web server. it provides wired and wireless access to the staff. the branch building is new and it does not have a network. The two buildings must be connected using a VPN connection. The branch building will not have any servers but just network devices that will provide the connectivity, the users in the branch building will be connected to the head office over the VPN. I had created a diagram based on this scenario, but my teacher rejected it saying that it does not follow Cisco hierarchical Model and the servers were not placed correctly in the diagram. I just wanted some help in this matter so that I Can create my network diagram correctly. If anyone could upload a picture of how the logical diagram should be for this scenario will be helpful, any other resources would also be great.

  Read the article

• Ubuntu + LigHTTPd: Server requests taking ages

  - by ctrl_freak

  I've had an issue since upgrading my distro a couple of weeks ago from hardy; receiving data after making a request has increasing intervals of nothing, as you can see from the picture below. http://i49.tinypic.com/2w5lvr9.png I have since reinstalled fresh from an Ubuntu 10.04 Server (i386) disk, but am still having the same issues. I'm running on a LigHTTPd, MySQL, PHP5 stack. The surprising thing is, that local browsing using lynx is super fast, as expected. Initially, after reinstalling, I copied over the old configuration files from the previous installation, but have since reinstalled LigHTTPd and rebuilt the config file from scratch. The only correlation I could find, was that I attempted installation of ionCube and Zend Optimizer for a script I was testing, however I would think that it could no longer impact seeing I had reinstalled the OS. I have also removed Suhosin just in case, however it had no impact. I'm thinking it possibly has something to do with networking, but I wouldn't know where to start. The server is manually assigned an IP by it's MAC address on the router. The fact that the time seems to be exponential (to a point) worries me. I've tried strace'ing the LigHTTPd and MySQL processes, however I couldn't see anything obvious, not that I'd really know what I'm looking for. RAM and CPU usage don't seem to be out of the ordinary, but I can't say its perfect.. I'm hoping someone has experienced the same, or can point me in a direction, as searching has proved fruitless as I don't know anything specific. Config files can be posted, if requested.

  Read the article

• MySQL : table organisation for very large sets with high update frequency

  - by Remiz

  I'm facing a dilemma in the choice of my MySQL schema application. So before I start here is a picture extremely simplified of my database : Schema here : http://i43.tinypic.com/2wp5lxz.png In one sentence : for each customer, the application harvest text data and attached tags to each data collected. As approximation of the usage of each table, here is what I expect : customer : ~5000, shouldn't grow fast data : 5 millions per customer, could double or triple for big customers. tag : ~1000, quite fixed size data_tag : hundred of millions per customer easily. Each data can be tagged a lot. The harvesting process is permanent, that means that around every 15 minutes new data come and are tagged, that require a very constant index refreshing. A lot of my queries are a SELECT COUNT of DATA between specific DATES and tagged with a specific TAG on a specific CUSTOMER (very rarely it will involve several customers). Here is the situation, you can imagine with this kind of volume of data I'm facing a challenge in term of data organization and indexing. Again, it's a very minimalistic and simplified version of my structure. My question is, is it better: to stick with this model and to manage crazy index optimization ? (which involves potentially having billions of rows in the data_tag table) change the schema and use one data table and one data_tag table per customer ? (which involves having 5000 tables on my database) I'm running all of this on a MySQL 5.0 dedicated server (quad-core, 8Go of ram) replicated. I only use InnoDB, I also have another server that run Sphinx. So knowing all of this, I can't wait to hear your opinion about this. Thanks.

  Read the article

• Setting up a virtual ftp directory that points to another computer

  - by AngryHacker

  I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

  Read the article

• What is the correct approach i should use for an application that requires amazon S3 uploads and SimpleDB data management?

  - by Luis Oscar

  I am developing an application for iOS and that is going smoothly, the problem is that I am very new at server sided things. I am totally confused about how to correctly use Amazon Web Services for this purpose. What I want to do is very simple. I want my application to be able to query a servlet hosted in EC2 to be able to retrieve pictures and data based on some criteria from S3 and SImpleDB respectively. Also the application should be able to upload pictures into a S3 bucket and register the information in the SImpleDB. My main concerns are security and costs, So far i was using Amazon Token Vending Machine but I haven't been successful when trying to customize it, and while researching I discovered that on the long run it is very expensive. The ultimate goal is to handle a "social" picture service for my iOS application. Being able to register new users, authenticate these users. See what permissions they have to which pictures from the bucked. And all this without having to worry about Third party people from accessing the private pictures of my users. Sorry for this question but I am really clueless about how to handle this... I have tried reading many articles but all these server stuff looks very scary.

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >