Search Results

Search found 6520 results on 261 pages for 'sent'.

Page 168/261 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• SQL SERVER – Fix : Error 3623 – An invalid floating point operation occurred

  - by pinaldave

  Going back in time, I always had a problem with mathematics. It was a great subject and I loved it a lot but I only mastered it after practices a lot. I learned that mathematics problems should be addressed systematically and being verbose is not a trick, I learned to solve any problem. Recently one of reader sent me an email with the title “Mathematics problem – please help!” and I was a bit scared. I was good at mathematics but not the best. When I opened the email I was relieved as it was Mathematics problem with SQL Server. My friend received following error while working with SQL Server. Msg 3623, Level 16, State 1, Line 1 An invalid floating point operation occurred. The reasons for the error is simply that invalid usage of the mathematical function is attempted. Let me give you a few examples of the same. SELECT SQRT(-5); SELECT ACOS(-3); SELECT LOG(-9); If you run any of the above functions they will give you an error related to invalid floating point. Honestly there is no workaround except passing the function appropriate values. SQRT of a negative number will give you result in real numbers which is not supported at this point of time as well LOG of a negative number is not possible (because logarithm is the inverse function of an exponential function and the exponential function is NEVER negative). When I send above reply to my friend he did understand that he was passing incorrect value to the function. As mentioned earlier the only way to fix this issue is finding incorrect value and avoid passing it to the function. Every mathematics function is different and there is not a single solution to identify erroneous value passed. If you are facing this error and not able to figure out the solution. Post a comment and I will do my best to figure out the solution. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• WCF WS-Security and WSE Nonce Authentication

  - by Rick Strahl

  WCF makes it fairly easy to access WS-* Web Services, except when you run into a service format that it doesn't support. Even then WCF provides a huge amount of flexibility to make the service clients work, however finding the proper interfaces to make that happen is not easy to discover and for the most part undocumented unless you're lucky enough to run into a blog, forum or StackOverflow post on the matter. This is definitely true for the Password Nonce as part of the WS-Security/WSE protocol, which is not natively supported in WCF. Specifically I had a need to create a WCF message on the client that includes a WS-Security header that looks like this from their spec document:<soapenv:Header> <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken wsu:Id="UsernameToken-8" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsse:Username>TeStUsErNaMe1</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >TeStPaSsWoRd1</wsse:Password> <wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >f8nUe3YupTU5ISdCy3X9Gg==</wsse:Nonce> <wsu:Created>2011-05-04T19:01:40.981Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </soapenv:Header> Specifically, the Nonce and Created keys are what WCF doesn't create or have a built in formatting for. Why is there a nonce? My first thought here was WTF? The username and password are there in clear text, what does the Nonce accomplish? The Nonce and created keys are are part of WSE Security specification and are meant to allow the server to detect and prevent replay attacks. The hashed nonce should be unique per request which the server can store and check for before running another request thus ensuring that a request is not replayed with exactly the same values. Basic ServiceUtl Import - not much Luck The first thing I did when I imported this service with a service reference was to simply import it as a Service Reference. The Add Service Reference import automatically detects that WS-Security is required and appropariately adds the WS-Security to the basicHttpBinding in the config file:<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="RealTimeOnlineSoapBinding"> <security mode="Transport" /> </binding> <binding name="RealTimeOnlineSoapBinding1" /> </basicHttpBinding> </bindings> <client> <endpoint address="https://notarealurl.com:443/services/RealTimeOnline" binding="basicHttpBinding" bindingConfiguration="RealTimeOnlineSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> </configuration> If if I run this as is using code like this:var client = new RealTimeOnlineClient(); client.ClientCredentials.UserName.UserName = "TheUsername"; client.ClientCredentials.UserName.Password = "ThePassword"; … I get nothing in terms of WS-Security headers. The request is sent, but the the binding expects transport level security to be applied, rather than message level security. To fix this so that a WS-Security message header is sent the security mode can be changed to: <security mode="TransportWithMessageCredential" /> Now if I re-run I at least get a WS-Security header which looks like this:<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <u:Timestamp u:Id="_0"> <u:Created>2012-11-24T02:55:18.011Z</u:Created> <u:Expires>2012-11-24T03:00:18.011Z</u:Expires> </u:Timestamp> <o:UsernameToken u:Id="uuid-18c215d4-1106-40a5-8dd1-c81fdddf19d3-1"> <o:Username>TheUserName</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> Closer! Now the WS-Security header is there along with a timestamp field (which might not be accepted by some WS-Security expecting services), but there's no Nonce or created timestamp as required by my original service. Using a CustomBinding instead My next try was to go with a CustomBinding instead of basicHttpBinding as it allows a bit more control over the protocol and transport configurations for the binding. Specifically I can explicitly specify the message protocol(s) used. Using configuration file settings here's what the config file looks like:<?xml version="1.0"?> <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="CustomSoapBinding"> <security includeTimestamp="false" authenticationMode="UserNameOverTransport" defaultAlgorithmSuite="Basic256" requireDerivedKeys="false" messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10"> </security> <textMessageEncoding messageVersion="Soap11"></textMessageEncoding> <httpsTransport maxReceivedMessageSize="2000000000"/> </binding> </customBinding> </bindings> <client> <endpoint address="https://notrealurl.com:443/services/RealTimeOnline" binding="customBinding" bindingConfiguration="CustomSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> <startup> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> </startup> </configuration> This ends up creating a cleaner header that's missing the timestamp field which can cause some services problems. The WS-Security header output generated with the above looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-291622ca-4c11-460f-9886-ac1c78813b24-1"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> This is closer as it includes only the username and password. The key here is the protocol for WS-Security:messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10" which explicitly specifies the protocol version. There are several variants of this specification but none of them seem to support the nonce unfortunately. This protocol does allow for optional omission of the Nonce and created timestamp provided (which effectively makes those keys optional). With some services I tried that requested a Nonce just using this protocol actually worked where the default basicHttpBinding failed to connect, so this is a possible solution for access to some services. Unfortunately for my target service that was not an option. The nonce has to be there. Creating Custom ClientCredentials As it turns out WCF doesn't have support for the Digest Nonce as part of WS-Security, and so as far as I can tell there's no way to do it just with configuration settings. I did a bunch of research on this trying to find workarounds for this, and I did find a couple of entries on StackOverflow as well as on the MSDN forums. However, none of these are particularily clear and I ended up using bits and pieces of several of them to arrive at a working solution in the end. http://stackoverflow.com/questions/896901/wcf-adding-nonce-to-usernametoken http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/4df3354f-0627-42d9-b5fb-6e880b60f8ee The latter forum message is the more useful of the two (the last message on the thread in particular) and it has most of the information required to make this work. But it took some experimentation for me to get this right so I'll recount the process here maybe a bit more comprehensively. In order for this to work a number of classes have to be overridden: ClientCredentials ClientCredentialsSecurityTokenManager WSSecurityTokenizer The idea is that we need to create a custom ClientCredential class to hold the custom properties so they can be set from the UI or via configuration settings. The TokenManager and Tokenizer are mainly required to allow the custom credentials class to flow through the WCF pipeline and eventually provide custom serialization. Here are the three classes required and their full implementations:public class CustomCredentials : ClientCredentials { public CustomCredentials() { } protected CustomCredentials(CustomCredentials cc) : base(cc) { } public override System.IdentityModel.Selectors.SecurityTokenManager CreateSecurityTokenManager() { return new CustomSecurityTokenManager(this); } protected override ClientCredentials CloneCore() { return new CustomCredentials(this); } } public class CustomSecurityTokenManager : ClientCredentialsSecurityTokenManager { public CustomSecurityTokenManager(CustomCredentials cred) : base(cred) { } public override System.IdentityModel.Selectors.SecurityTokenSerializer CreateSecurityTokenSerializer(System.IdentityModel.Selectors.SecurityTokenVersion version) { return new CustomTokenSerializer(System.ServiceModel.Security.SecurityVersion.WSSecurity11); } } public class CustomTokenSerializer : WSSecurityTokenSerializer { public CustomTokenSerializer(SecurityVersion sv) : base(sv) { } protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); // in this case password is plain text // for digest mode password needs to be encoded as: // PasswordAsDigest = Base64(SHA-1(Nonce + Created + Password)) // and profile needs to change to //string password = GetSHA1String(nonce + createdStr + userToken.Password); string password = userToken.Password; writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } protected string GetSHA1String(string phrase) { SHA1CryptoServiceProvider sha1Hasher = new SHA1CryptoServiceProvider(); byte[] hashedDataBytes = sha1Hasher.ComputeHash(Encoding.UTF8.GetBytes(phrase)); return Convert.ToBase64String(hashedDataBytes); } } Realistically only the CustomTokenSerializer has any significant code in. The code there deals with actually serializing the custom credentials using low level XML semantics by writing output into an XML writer. I can't take credit for this code - most of the code comes from the MSDN forum post mentioned earlier - I made a few adjustments to simplify the nonce generation and also added some notes to allow for PasswordDigest generation. Per spec the nonce is nothing more than a unique value that's supposed to be 'random'. I'm thinking that this value can be any string that's unique and a GUID on its own probably would have sufficed. Comments on other posts that GUIDs can be potentially guessed are highly exaggerated to say the least IMHO. To satisfy even that aspect though I added the SHA1 encryption and binary decoding to give a more random value that would be impossible to 'guess'. The original example from the forum post used another level of encoding and decoding to string in between - but that really didn't accomplish anything but extra overhead. The header output generated from this looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-f43d8b0d-0ebb-482e-998d-f544401a3c91-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ThePassword</o:Password> <o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >PjVE24TC6HtdAnsf3U9c5WMsECY=</o:Nonce> <u:Created>2012-11-23T07:10:04.670Z</u:Created> </o:UsernameToken> </o:Security> </s:Header> which is exactly as it should be. Password Digest? In my case the password is passed in plain text over an SSL connection, so there's no digest required so I was done with the code above. Since I don't have a service handy that requires a password digest,  I had no way of testing the code for the digest implementation, but here is how this is likely to work. If you need to pass a digest encoded password things are a little bit trickier. The password type namespace needs to change to: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest and then the password value needs to be encoded. The format for password digest encoding is this: Base64(SHA-1(Nonce + Created + Password)) and it can be handled in the code above with this code (that's commented in the snippet above): string password = GetSHA1String(nonce + createdStr + userToken.Password); The entire WriteTokenCore method for digest code looks like this:protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); string password = GetSHA1String(nonce + createdStr + userToken.Password); writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } I had no service to connect to to try out Digest auth - if you end up needing it and get it to work please drop a comment… How to use the custom Credentials The easiest way to use the custom credentials is to create the client in code. Here's a factory method I use to create an instance of my service client:  public static RealTimeOnlineClient CreateRealTimeOnlineProxy(string url, string username, string password) { if (string.IsNullOrEmpty(url)) url = "https://notrealurl.com:443/cows/services/RealTimeOnline"; CustomBinding binding = new CustomBinding(); var security = TransportSecurityBindingElement.CreateUserNameOverTransportBindingElement(); security.IncludeTimestamp = false; security.DefaultAlgorithmSuite = SecurityAlgorithmSuite.Basic256; security.MessageSecurityVersion = MessageSecurityVersion.WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10; var encoding = new TextMessageEncodingBindingElement(); encoding.MessageVersion = MessageVersion.Soap11; var transport = new HttpsTransportBindingElement(); transport.MaxReceivedMessageSize = 20000000; // 20 megs binding.Elements.Add(security); binding.Elements.Add(encoding); binding.Elements.Add(transport); RealTimeOnlineClient client = new RealTimeOnlineClient(binding, new EndpointAddress(url)); // to use full client credential with Nonce uncomment this code: // it looks like this might not be required - the service seems to work without it client.ChannelFactory.Endpoint.Behaviors.Remove<System.ServiceModel.Description.ClientCredentials>(); client.ChannelFactory.Endpoint.Behaviors.Add(new CustomCredentials()); client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; return client; } This returns a service client that's ready to call other service methods. The key item in this code is the ChannelFactory endpoint behavior modification that that first removes the original ClientCredentials and then adds the new one. The ClientCredentials property on the client is read only and this is the way it has to be added.   Summary It's a bummer that WCF doesn't suport WSE Security authentication with nonce values out of the box. From reading the comments in posts/articles while I was trying to find a solution, I found that this feature was omitted by design as this protocol is considered unsecure. While I agree that plain text passwords are rarely a good idea even if they go over secured SSL connection as WSE Security does, there are unfortunately quite a few services (mosly Java services I suspect) that use this protocol. I've run into this twice now and trying to find a solution online I can see that this is not an isolated problem - many others seem to have struggled with this. It seems there are about a dozen questions about this on StackOverflow all with varying incomplete answers. Hopefully this post provides a little more coherent content in one place. Again I marvel at WCF and its breadth of support for protocol features it has in a single tool. And even when it can't handle something there are ways to get it working via extensibility. But at the same time I marvel at how freaking difficult it is to arrive at these solutions. I mean there's no way I could have ever figured this out on my own. It takes somebody working on the WCF team or at least being very, very intricately involved in the innards of WCF to figure out the interconnection of the various objects to do this from scratch. Luckily this is an older problem that has been discussed extensively online and I was able to cobble together a solution from the online content. I'm glad it worked out that way, but it feels dirty and incomplete in that there's a whole learning path that was omitted to get here… Man am I glad I'm not dealing with SOAP services much anymore. REST service security - even when using some sort of federation is a piece of cake by comparison :-) I'm sure once standards bodies gets involved we'll be right back in security standard hell…© Rick Strahl, West Wind Technologies, 2005-2012Posted in WCF  Web Services   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Sending mail with Gmail Account using System.Net.Mail in ASP.NET

  - by Jalpesh P. Vadgama

  Any web application is in complete without mail functionality you should have to write send mail functionality. Like if there is shopping cart application for example then when a order created on the shopping cart you need to send an email to administrator of website for Order notification and for customer you need to send an email of receipt of order. So any web application is not complete without sending email. This post is also all about sending email. In post I will explain that how we can send emails from our Gmail Account without purchasing any smtp server etc. There are some limitations for sending email from Gmail Account. Please note following things. Gmail will have fixed number of quota for sending emails per day. So you can not send more then that emails for the day. Your from email address always will be your account email address which you are using for sending email. You can not send an email to unlimited numbers of people. Gmail ant spamming policy will restrict this. Gmail provide both Popup and SMTP settings both should be active in your account where you testing. You can enable that via clicking on setting link in gmail account and go to Forwarding and POP/Imap. So if you are using mail functionality for limited emails then Gmail is Best option. But if you are sending thousand of email daily then it will not be Good Idea. Here is the code for sending mail from Gmail Account. using System.Net.Mail; namespace Experiement { public partial class WebForm1 : System.Web.UI.Page { protected void Page_Load(object sender,System.EventArgs e) { MailMessage mailMessage = new MailMessage(new MailAddress("[email protected]") ,new MailAddress("[email protected]")); mailMessage.Subject = "Sending mail through gmail account"; mailMessage.IsBodyHtml = true; mailMessage.Body = "<B>Sending mail thorugh gmail from asp.net</B>"; System.Net.NetworkCredential networkCredentials = new System.Net.NetworkCredential("[email protected]", "yourpassword"); SmtpClient smtpClient = new SmtpClient(); smtpClient.EnableSsl = true; smtpClient.UseDefaultCredentials = false; smtpClient.Credentials = networkCredentials; smtpClient.Host = "smtp.gmail.com"; smtpClient.Port = 587; smtpClient.Send(mailMessage); Response.Write("Mail Successfully sent"); } } } That’s run this application and you will get like below in your account. Technorati Tags: Gmail,System.NET.Mail,ASP.NET

  Read the article

• Using DEBUG Mode in Oracle SQL Developer to Log SQL

  - by thatjeffsmith

  Curious how we’re getting the data you see in SQL Developer when you click on something? While many of the dialogs provide a ‘SQL’ panel that shows you the SQL ABOUT to be generated, I’d rather see the SQL AS it’s executed. True, you could set a TRACE or fire up a Monitor Sessions report, but both of those solutions leave me hungry for more. Did you know that SQL Developer has a ‘debug’ mode? It slows the tool down a bit and spits out a lot of information you don’t care about, but it ALSO shows you ALL the SQL that is sent to the database, as you click around the tool! See ALL the SQL that SQL Developer sends to the database on your behalf Enable DEBUG Mode When you see the splash screen as SQL Developer fires up, frantically hit Up, Up, Down, Down, Left, Right, Left, Right, B, A, SELECT, Start. Wait, wrong game. No, all you need to do is go to your SQL Developer directory and navigate down to the ‘bin’ directory. In that directory, find the ‘sqldeveloper.conf’ file. Install Directory - sqldeveloper - bin - sqldeveloper.conf Open it with a text editor. Find this line IncludeConfFile sqldeveloper-nondebug.conf And replace it with this line IncludeConfFile sqldeveloper-debug.conf Save the file. Start up SQL Developer. Observe the Logging Page – Log Panel for the SQL There’s going to be more than just SQL here. You’ll actually see a LOT of other information. If you’re having general problems with the tool and you want to see the nitty-gritty of what’s going on, then this is a good place to satisfy your curiosity and might help us diagnose your issue if you post to the forums or open a ticket with My Oracle Support. You’ll find ‘INFO’ entries that look a little something like this - This is the query used to populate your Tables list in the connection tree. You can double-click on the sql text and get a pop-up window that’s much easier to read. See all that typing we’re saving you? I don’t recommend running in DEBUG mode all the time. Capturing this information and displaying it is more expensive than not doing so. And it provides a lot of information you don’t normally need to see. But when you DO want to know what’s going on and why, this is an excellent way of getting that information. When you’re ready to go back to ‘normal’ mode, just close SQL Developer, go back to your .conf file, and add the ‘nondebug’ bit back.

  Read the article

• SQL SERVER – Size of Index Table for Each Index – Solution 3 – Powershell

  - by pinaldave

  Laerte Junior If you are a Powershell user, the name of the Laerte Junior is not a new name. He is the one man with exceptional knowledge of Powershell. He is not only very knowledgeable, but also very kind and eager to those in need. I have been attempting to setup Powershell for many days, but constantly facing issues. I was not able to get going with this tool. Finally, yesterday I sent email to Laerte in response to his comment posted here. Within 5 minutes, Laerte came online and helped me with the solution. He spend nearly 15 minutes working along with me to solve my problem with installation. And yes, he did resolve it remotely without looking at my screen – What a skilled and exceptional person!! I will soon post a detail note about the issue I faced and resolved with the help of Laerte. Here is his solution to my earlier puzzle in his own words. Read the original puzzle here and Laerte’s solution from here. Hi Pinal, I do not say better, but maybe another approach to enthusiasts in powershell and SQLSPX library would be: 1 – All indexes in all tables and all databases Get-SqlDatabase -sqlserver “Yourserver” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused 2 – All Indexes in all tables and specific database Get-SqlDatabase -sqlserver “Yourserver” “Yourdb” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused 3 – All Indexes in specific table and database Get-SqlDatabase -sqlserver “Yourserver” “Yourdb” | Get-SqlTable “YourTable” | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused and to output to txt.. pipe Out-File Get-SqlDatabase -sqlserver “Yourserver” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused | out-file c:\IndexesSize.txt If you have one txt with all your servers, can be for all of them also. Lets say you have all your servers in servers.txt: something like NameServer1 NameServer2 NameServer3 NameServer4 We could Use : foreach ($Server in Get-content c:\temp\servers.txt) { Get-SqlDatabase -sqlserver $Server | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused } :) After fixing my issue with Powershell, I ran Laerte‘s second suggestion – “All Indexes in all tables and specific database” and found the following accurate output. Click to Enlarge Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Index, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Powershell

  Read the article

• SQL SERVER – Size of Index Table for Each Index – Solution 3 – Powershell

  - by pinaldave

  Laerte Junior If you are a Powershell user, the name of the Laerte Junior is not a new name. He is the one man with exceptional knowledge of Powershell. He is not only very knowledgeable, but also very kind and eager to those in need. I have been attempting to setup Powershell for many days, but constantly facing issues. I was not able to get going with this tool. Finally, yesterday I sent email to Laerte in response to his comment posted here. Within 5 minutes, Laerte came online and helped me with the solution. He spend nearly 15 minutes working along with me to solve my problem with installation. And yes, he did resolve it remotely without looking at my screen – What a skilled and exceptional person!! I will soon post a detail note about the issue I faced and resolved with the help of Laerte. Here is his solution to my earlier puzzle in his own words. Read the original puzzle here and Laerte’s solution from here. Hi Pinal, I do not say better, but maybe another approach to enthusiasts in powershell and SQLSPX library would be: 1 – All indexes in all tables and all databases Get-SqlDatabase -sqlserver “Yourserver” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused 2 – All Indexes in all tables and specific database Get-SqlDatabase -sqlserver “Yourserver” “Yourdb” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused 3 – All Indexes in specific table and database Get-SqlDatabase -sqlserver “Yourserver” “Yourdb” | Get-SqlTable “YourTable” | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused and to output to txt.. pipe Out-File Get-SqlDatabase -sqlserver “Yourserver” | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused | out-file c:\IndexesSize.txt If you have one txt with all your servers, can be for all of them also. Lets say you have all your servers in servers.txt: something like NameServer1 NameServer2 NameServer3 NameServer4 We could Use : foreach ($Server in Get-content c:\temp\servers.txt) { Get-SqlDatabase -sqlserver $Server | Get-SqlTable | Get-SqlIndex | Format-table Server,dbname,schema,table,name,id,spaceused } :) After fixing my issue with Powershell, I ran Laerte‘s second suggestion – “All Indexes in all tables and specific database” and found the following accurate output. Click to Enlarge Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Index, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Powershell

  Read the article

• SQLAuthority News – MS Access Database is the Way to Go – April 1st Humor

  - by pinaldave

  First of all, today is April 1- April Fool’s Day, so I have written this post for some light entertainment. My friend has just sent me an email about why a person should go for Access Database. For a short background, I used to be an MS Access user once (I will not call myself MS Access DBA), and I must say I had a good time with Database at that time. As time passed by, I moved from MS Access to SQL Server. Well, as for my friend’s email, his reasons considering MS Access usage really made me laugh. MS Access may have a few points where it totally makes sense to use it. However, in the email that I received, there was not a single reason which was valid.  In fact, I thought it is an April 1st joke- just delivered a little earlier. Let us see some of the reasons from that email. Thanks to Mahesh Bhesania for sending this email to me. MS Access comes with lots of free stuff, e.g. MS Excel MS Access is the most preferred desktop database system MS Access can import data from MS Excel and SQL Server MS Access provides a real time database MS Access has a free IDE-to-VB Script MS Access fits well in your hard drive I actually think that the above points are either incorrect beliefs of some users, or someone just wrote them to give some laughter with such inaccurate data. And, for the same reason I decided to browse the Internet and do some research on MS Access database to verify my thoughts. While searching on this subject, I found the following two interesting statements from the site: Microsoft Access Database, Why Choose It? Other software manufacturers are more likely to provide interfaces to MS Access than any other desktop database system Microsoft Access consulting rates are typically lower for Access consultants compared to Oracle or SQL Server consultants The second one is may be the worst reason for you to switch to MS Access if you are already an SQL Server consultant. With this cartoon, have you ever felt like you were one of these chickens at some point in time? I guess that the moment might have just happened before the minute we say “I guess we were on the same page?” Does this mean we are IN the same table, or ON the same table?! (I accept bad joke!) It is All Fools’ Day after all, so just laugh! If you have something funny but non-offensive to share, just  leave your comment here. Reference: Pinal Dave (http://blog.SQLAuthority.com), Cartoon source unknown. Filed under: Software Development, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: MS ACCESS

  Read the article

• ASR / SNMP on Exadata

  - by rene.kundersma

  Recently I worked with ASR on Exadata for multiple customers. ASR is a great functionality that enables your 'systems' to alert Oracle when hardware failures occur. Sun hardware is using ASM for sometime and since 2009/2010 this is also available for Exadata. My goal is not to re-write the documentation so for general information I like to refer to this link. So, where is this note about ? Well, it is about two things I experienced around setting up ASR. I like to provide my experience so others can be successful with ASR fast as well. (It is however expected that things will be updated in the latest documentation.) First, imagine yourself configuring SNMP traps to be sent to ASR. In this situation be sure to not erase any existing SNMP Subscribers settings for example the subscription to Enterprise Manager Grid Control or whatever you already subscribed for. So, when you have documentation stating to execute "cellcli -e alter cell snmpSubscriber=(host=, port=)" be sure to add existing snmpSubscribers when they exist. The syntax allows this: snmpSubscriber= ((host=host [,port=port] [,community=community][,type=ASR]) [,(host=host[,port=port][,community=community][,type=ASR])...) Second, when configuring SnmpSubscribers using DCLI you have to work with a slash to escape the brackets. Be sure to verify your SNMP settings after setting them because you might end up with a bracket in the 'asrs.state' file stating 'public\' in stead of 'public'. Having the extra slash after the word 'public' of course doesn't help when sending SNMP-traps: dcli -g dbs_group -l root -n "/opt/oracle.cellos/compmon/exadata_mon_hw_asr.pl -validate_snmp_subscriber -type asr" cn38: Sending test trap to destination - 173.25.100.43:162 cn38: (1). count - 50 Failed to run "/usr/bin/snmptrap -v 2c -c public\ -M "+/opt/oracle.cellos/compmon/" -m SUN-HW-TRAP-MIB 173.25.100.43:162 "" SUN-HW- TRAP-MIB::sunHwTrapTestTrap sunHwTrapSystemIdentifier s " Sun Oracle Database Machine secret" sunHwTrapChassisId s "secret" sunHwTrapProductName s "SUN FIRE X4170 SERVER" sunHwTrapTestMessage s "This is a test trap. Exadata Compute Server: cn38.oracle.com "" cn38: getaddrinfo: +/opt/oracle.cellos/compmon/ Name or service not known cn38: snmptrap: Unknown host (+/opt/oracle.cellos/compmon/) All together ASR is a great addition to Exadata that I highly recommend. Some excellent documentation is written on the implementation details and available on MyOracleSupport. See "Oracle Database Machine Monitoring (Doc ID 1110675.1)" Rene Kundersma Technical Architect Oracle Technology Services

  Read the article

• Microsoft Templates included in jQuery 1.5!

  - by Stephen Walther

  When I joined the ASP.NET team as the Program Manager for Ajax, the ASP.NET team was working on releasing a new version of the Microsoft Ajax Library. This new version of the Microsoft Ajax Library had several really innovative and unique features such as support for client templates, client data-binding, script dependency management, and globalization. However, we kept hearing the message that our customers wanted to use jQuery when building ASP.NET applications. Therefore, about ten months ago, we decided to pursue a risky strategy. Scott Guthrie sent me to Cambridge to meet with John Resig – the creator of jQuery and leader of the jQuery project – to find out whether Microsoft and jQuery could work together. We wanted to find out whether the jQuery project would be open to allowing Microsoft to contribute the innovative features that we were developing for the Microsoft Ajax Library -- such as client templates and client data-binding -- to the jQuery library. Fortunately, the Cambridge meeting with Resig went well. John Resig was very open to accepting contributions to the jQuery library. Over the next few months, we worked out a process for Microsoft to contribute new features to the open-source jQuery project. Resig and Guthrie appeared on stage at the MIX10 conference to announce that Microsoft would be contributing features to jQuery. It has been a long journey, but I am happy to report success. Today, Microsoft and the jQuery project have announced that three plugins developed by developers on the ASP.NET team – the jQuery Templates, jQuery Data Link, and jQuery Globalization plugins – have been accepted as official jQuery plugins. In addition, the jQuery Templates plugin will be integrated into jQuery 1.5 which is the next major release of jQuery. You can learn more about the plugins by watching the following Web Camps TV episode hosted by James Senior with Stephen Walther: Web Camps TV #5 - Microsoft Commits Code to jQuery! You can read Scott Guthrie’s blog announcement here: http://weblogs.asp.net/scottgu/archive/2010/10/04/jquery-templates-data-link-and-globalization-accepted-as-official-jquery-plugins.aspx You can read the jQuery team’s announcement here: http://blog.jquery.com/2010/10/04/new-official-jquery-plugins-provide-templating-data-linking-and-globalization/ I wrote the original proposal for the jQuery Templates plugin. Dave Reed and Boris Moore were the ASP.NET developers responsible for actually writing the plugin (with lots of input from the jQuery team and the jQuery community). Boris has written a great set of tutorials on the Templates plugin. The first tutorial in his series is located here: http://www.borismoore.com/2010/09/introducing-jquery-templates-1-first.html I want to thank John Resig, Richard Worth, Scott Gonzalez, Rey Bango, Jorn Zaefferer, Karl Swedberg and all of the other members of the jQuery team for working with the ASP.NET team and accepting our contributions to the jQuery project.

  Read the article

• ESB Toolkit 2.0 EndPointConfig (HTTPS with WCF-BasicHttp and the ESB Toolkit 2.0)

  - by Andy Morrison

  Earlier this week I had an ESB endpoint (Off-Ramp in ESB parlance) that I was sending to over http using WCF-BasicHttp.  I needed to switch the protocol to https: which I did by changing my UDDI Binding over to https:  No problem from a management perspective; however, when I tried to run the process I saw this exception: Event Type:                     Error Event Source:                BizTalk Server 2009 Event Category:            BizTalk Server 2009 Event ID:   5754 Date:                                    3/10/2010 Time:                                   2:58:23 PM User:                                    N/A Computer:                       XXXXXXXXX Description: A message sent to adapter "WCF-BasicHttp" on send port "SPDynamic.XXX.SR" with URI "https://XXXXXXXXX.com/XXXXXXX/whatever.asmx" is suspended.  Error details: System.ArgumentException: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via    at System.ServiceModel.Channels.TransportChannelFactory`1.ValidateScheme(Uri via)    at System.ServiceModel.Channels.HttpChannelFactory.ValidateCreateChannelParameters(EndpointAddress remoteAddress, Uri via)    at System.ServiceModel.Channels.HttpChannelFactory.OnCreateChannel(EndpointAddress remoteAddress, Uri via)    at System.ServiceModel.Channels.ChannelFactoryBase`1.InternalCreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ChannelFactoryBase`1.CreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.ServiceChannelFactoryOverRequest.CreateInnerChannelBinder(EndpointAddress to, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.CreateServiceChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.CreateChannel(Type channelType, EndpointAddress address, Uri via)    at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.ChannelFactory`1.CreateChannel()    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.GetChannel[TChannel](IBaseMessage bizTalkMessage, ChannelFactory`1& cachedFactory)    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendMessage(IBaseMessage bizTalkMessage)  MessageId:  {1170F4ED-550F-4F7E-B0E0-1EE92A25AB10}  InstanceID: {1640C6C6-CA9C-4746-AEB0-584FDF7BB61E} I knew from a previous experience that I likely needed to set the SecurityMode setting for my Send Port.  But how do you do this for a Dynamic port (which I was using since this is an ESB solution)? Within the UDDI portal you have to add an additional Instance Info to your Binding named: EndPointConfig  Then you have to set its value to:  SecurityMode=Transport Like this:    The EndPointConfig is how the ESB Toolkit 2.0 provides extensibility for the various transports.  To see what the key-value pair options are for a given transport, open up an itinerary and change one of your resolvers to a “static” resolver by setting the “Resolver Implementation” to Static.  Then select a “Transport Name” ”, for instance to WCF-BasicHttp.  At this point you can then click on the “EndPoint Configuration” property for to see an adapter/ramp specific properties dialog (key-value pairs.)    Here’s the dialog that popped up for WCF-BasicHttp:   I simply set the SecurityMode to Transport.  Please note that you will get different properties within the window depending on the Transport Name you select for the resolver. When you are done with your settings, export the itinerary to disk and find that xml; then find that resolver’s xml within that file.  It will look like endpointConfig=SecurityMode=Transport in this case.  Note that if you set additional properties you will have additional key-value pairs after endpointConfig= Copy that string and paste it into the UDDI portal for you Binding’s EndPointConfig Instance Info value.

  Read the article

• AuthnRequest Settings in OIF / SP

  - by Damien Carru

  In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/>   <samlp:RequestedAuthnContext Comparison="minimum">      <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">         urn:oasis:names:tc:SAML:2.0:ac:classes:X509      </saml:AuthnContextClassRef>   </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

  Read the article

• Informal Interviews: Just Relax (or Should I?)

  - by david.talamelli

  I was in our St Kilda Rd office last week and had the chance to meet up with Dan and David from GradConnection. I love what these guys are doing, their business has been around for two years and I really like how they have taken their own experiences from University found a niche in their market and have chased it. These guys are always networking. Whenever they come to Melbourne they send me a tweet to catch up, even though we often miss each other they are persistent. It sounds like their business is going from strength to strength and I have to think that success comes from their hard work and enthusiasm for their business. Anyway, before my meeting with ProGrad I noticed a tweet from Kevin Wheeler who was saying it was his last day in Melbourne - I sent him a message and we met up that afternoon for a coffee (I am getting to the point I promise). On my way back to the office after my meeting I was on a tram and was sitting beside a lady who was talking to her friend on her mobile. She had just come back from an interview and was telling her friend how laid back the meeting was and how she wasn't too sure of the next steps of the process as it was a really informal meeting. The recurring theme from this phone call was that 1) her and the interviewer got along really well and had a lot in common 2) the meeting was very informal and relaxed. I wasn't at the interview so I cannot say for certain, but in my experience regardless of the type of interview that is happening whether it is a relaxed interview at a coffee shop or a behavioural interview in an office setting one thing is consistent: the employer is assessing your ability to perform the role and fit into the company. Different interviewers I find have different interviewing styles. For example some interviewers may create a very relaxed environment in the thinking this will draw out less practiced answers and give a more realistic view of the person and their abilities while other interviewers may put the candidate "under the pump" to see how they react in a stressful situation. There are as many interviewing styles as there are interviewers. I think candidates regardless of the type of interview need to be professional and honest in both their skills/experiences, abilities and career plans (if you know what they are). Even though an interview may be informal, you shouldn't slip into complacency. You should not forget the end goal of the interview which is to get a job. Business happens outside of the office walls and while you may meet someone for a coffee it is still a business meeting no matter how relaxed the setting. You don't need to be stick in the mud and not let your personality shine through, but that first impression you make may play a big part in how far in the interview process you go. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• Silverlight Cream for April 03, 2010 -- #829

  - by Dave Campbell

  In this Issue: Scott Marlowe, Nokola, SilverLaw, Brad Abrams, Jeff Wilcox, Jesse Liberty, Alexey Zakharov, ondrejsv, Ward Bell, and David Anson. Shoutouts: Bart Czernicki has a post up about the latest with HTML5: HTML 5 is Born Old - Quake in HTML 5 I was sent a link to shoebox360 a while back and had to sign up to see the Silverlight use, but it does work very nice. I like the panoramic carousel in the viewer: shoebox360 Jeff Handley has a post up on RIA Services - Documentation Guidance and Community Samples... the team is looking for feedback from all of us Shawn Wildermuth posted his My MIX Talks' Source Code Laurent Bugnion posted his Sample code and slides for my TechDays10 (Belgium) talks From SilverlightCream.com: Silverlight to WCF Cross Domain SecurityException Scott Marlowe wrote an article about an often-encountered security exception having to do with cross-domain policies. He details the problem, the response, the solution, and yet another problem/solution associated... good stuff, Scott! Simple Functions for HTML Interop You've seen Nokola's graphic work... how about some HTML Interop from him? He's exposing the code he uses in his work. New Video: ChildWindow Styling - Silverlight 3 SilverLaw has a new video tutorial on Silerlight 3 ChildWindow Styling up - in German - but the video is language-agnostic :) Silverlight 4 + RIA Services - Ready for Business: Exposing WCF (SOAP\WSDL) Services Brad Abrams' continuation in his RIA series is this one demonstrating exposing RIA Services as a Soap\WSDL service Silverlight 4: New parser implementation. New parser features. Jeff Wilcox has a post up highlighting some of the new features in Silverlight 4 such as a new parser implementation with new XAML features. New Video Series – Getting Started With Silverlight Jesse Liberty is starting a new video tutorial series that's going to build out to be a "complete survey of Silverlight programming". The first two are in this post and are Getting Started and Adding Controls to a Silverlight App... looks like good material, Jesse, and all the source is there for the taking as well. Silverlight layout hack: Centered content with fixed maxwidth Alexey Zakharov has a quick tip up on creating centered content with fixed maxwidth. He calls it a dirty trick... looks like code to me :) Silverlight DataForm’s autogenerated fields send empty strings to database ondrejsv points up a problem he had with the Toolkit's DataForm, and his solution to it... with code for all of us following along behind :) DevForce Extensibility With MEF InheritedExport Ward Bell has a post up describing how they got DevForce MEF'd up, and looks like a good post to get you all excited about MEF as well... lots of external links and good info. Tip: Read-only custom DependencyProperties don't exist in Silverlight, but can be closely approximated David Anson's latest Tip is about Read-only custom DependencyProperties in Silverlight -- which strictly is not possible, but he has a code example up that gets close. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Silverlight Cream for May 02, 2010 -- #854

  - by Dave Campbell

  In this Issue: Michael Washington, Jason Young(-2-, -3-), Phil Middlemiss, Jeremy Likness, Victor Gaudioso, Kunal Chowdhury, Antoni Dol, and Jacek Ciereszko(-2-). Shoutout: Victor Gaudioso has aggregated All of My Silverlight Video Tutorials in One Place (revised again 05.02.10) From SilverlightCream.com: Unit Testing A Silverlight 'Simplified MVVM' Modal Popup Michael Washington's latest 'Simplified MVVM' post is published at The Code Project and is on Unit Testing with MVVM. Input Localization in Silverlight without IValueConverter Jason Young sent me some links to posts I've not seen... this first one is on localization by using the Language property of the Root Visual. MVVM – The Model - Part 1 – INotifyPropertyChanged Jason Young's next archive post is the first of a series on MVVM and Silverlight 4 ... implementing a simple ViewModel base class. Silverlight, WCF, and ASP.Net Configuration Gotchas Jason Young worked at tracking down the answers to some forum questions and in the process has produced a post of 'gotchas' with using WCF in Silverlight. A Chrome and Glass Theme - Part 5 Phil Middlemiss has part 5 of his Chrome and Glass Theme tutorial up ... in this one, he's looking at the Progress Bar and Slider. Download the files and play along. Silverlight Out of Browser (OOB) Versions, Images, and Isolated Storage Jeremy Likness has a post up responding to his 3 major questions about OOB apps, and he has to code up for the sample too. New Silverlight Video Tutorial: How to Make a Slide In/Out Navigation Bar – All in Blend Victor Gaudioso's latest video tutorial is on building a Behavior for a Slide in/out Navigation bar... kinda like the menu sliders on my GlyphMap Utility... only easier! Command Binding in Silverlight 4 (Step-by-Step) Kunal Chowdhury has another post up at DotNetFunda, and this time he's talking about Command Binding in Silverlight 4 with an eye toward MVVM usage. The Silverlight PageCurl implementation Antoni Dol has a post up about doing a Page Curl effect in Silverlight. He has a manual up on the effect and full application code. How to center and scale Silverlight applications using ViewBox control Jacek Ciereszko has a couple posts up about centering and scaling your app with the ViewBox control. This first one is a code solution. Source is available, as is a Polish version. Silverlight Center And Scale Behavior Jacek Ciereszko's 2nd post, he provides a Behavior that handles the scaling and centering of the previous post. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• SQLAuthority News – Virtual Launch Event for Office 2010 – Contest – Win MS Office License

  - by pinaldave

  Office products are integral products of any PC. I accept that without Office Suites, I can not survive or make enough leaving. I am blogger and use word to create my blogs. I am SQL Server Trainer  and I use PowerPoint as my presentation tool. I am SQL Server consultant and I use Excel to keep my work log. I can not see my life with Office Tools. Just like any other Microsoft Product there is strong community following Office Tools. Please count me in. The same community is hosting a Virtual Launch Event for Office 2010 on May 25 and 26th. The webcasts is FREE to attend and people can take part either online or by going to the nearest available center. The sessions will be delivered by MVPs. To register please visit: http://www.meraoffice.com. In June, limited cities will be hosting Community Launch Events for Office 2010. At the launch events, attendees will get to see Office 2010 in action and learn how to do their work better with Office 2010.  The details are available on http://office.merawindows.com. To support one of the largest community, I am announcing one contents. It is very easy to take part in the contest. You just have to answer one very simple question. Contest: Choose best option: With which Microsoft Office Product Powerpivot is associated? Options: 1) PowerPoint 2) Excel 3) Word Hint: http://search.sqlauthority.com Rules: Winner will be awarded 1 Office 2007 Home and Student. This will be freely upgradeable to Office 2010 once it releases in June. The winners will be sent emails and they will redeem their awards via microsoftstore.co.in The prizes can only be shipped to India and Indian residents are eligible. Winner will be selected by selected community leaders and MVPs at their sole discretion. Winner will be informed by email about the award. Most creative and informative comment will win the contest. Please spread the words about this contest. SQLAuthority.com will also send SQL Server book to the person who generates the most traffic to this blog post using Twitter, Facebook and other social media. This competition is also open to Indian residents only. I will measure the traffic using my wordpress.com stats plugin. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Office

  Read the article

• Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  This article is a continuation of my previous entry where I explained how OIF/IdP leverages OAM to authenticate users at runtime: OIF/IdP internally forwards the user to OAM and indicates which Authentication Scheme should be used to challenge the user if needed OAM determine if the user should be challenged (user already authenticated, session timed out or not, session authentication level equal or higher than the level of the authentication scheme specified by OIF/IdP…) After identifying the user, OAM internally forwards the user back to OIF/IdP OIF/IdP can resume its operation In this article, I will discuss how OIF/IdP can be configured to map Federation Authentication Methods to OAM Authentication Schemes: When processing an Authn Request, where the SP requests a specific Federation Authentication Method with which the user should be challenged When sending an Assertion, where OIF/IdP sets the Federation Authentication Method in the Assertion Enjoy the reading! Overview The various Federation protocols support mechanisms allowing the partners to exchange information on: How the user should be challenged, when the SP/RP makes a request How the user was challenged, when the IdP/OP issues an SSO response When a remote SP partner redirects the user to OIF/IdP for Federation SSO, the message might contain data requesting how the user should be challenged by the IdP: this is treated as the Requested Federation Authentication Method. OIF/IdP will need to map that Requested Federation Authentication Method to a local Authentication Scheme, and then invoke OAM for user authentication/challenge with the mapped Authentication Scheme. OAM would authenticate the user if necessary with the scheme specified by OIF/IdP. Similarly, when an IdP issues an SSO response, most of the time it will need to include an identifier representing how the user was challenged: this is treated as the Federation Authentication Method. When OIF/IdP issues an Assertion, it will evaluate the Authentication Scheme with which OAM identified the user: If the Authentication Scheme can be mapped to a Federation Authentication Method, then OIF/IdP will use the result of that mapping in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled If the Authentication Scheme cannot be mapped, then OIF/IdP will set the Federation Authentication Method as the Authentication Scheme name in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled Mappings In OIF/IdP, the mapping between Federation Authentication Methods and Authentication Schemes has the following rules: One Federation Authentication Method can be mapped to several Authentication Schemes In a Federation Authentication Method <-> Authentication Schemes mapping, a single Authentication Scheme is marked as the default scheme that will be used to authenticate a user, if the SP/RP partner requests the user to be authenticated via a specific Federation Authentication Method An Authentication Scheme can be mapped to a single Federation Authentication Method Let’s examine the following example and the various use cases, based on the SAML 2.0 protocol: Mappings defined as: urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapped to LDAPScheme, marked as the default scheme used for authentication BasicScheme urn:oasis:names:tc:SAML:2.0:ac:classes:X509 mapped to X509Scheme, marked as the default scheme used for authentication Use cases: SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:X509 as the RequestedAuthnContext: OIF/IdP will authenticate the use with X509Scheme since it is the default scheme mapped for that method. SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the RequestedAuthnContext: OIF/IdP will authenticate the use with LDAPScheme since it is the default scheme mapped for that method, not the BasicScheme SP did not request any specific methods, and user was authenticated with BasisScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with LDAPScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with BasisSessionlessScheme: OIF/IdP will issue an Assertion with BasisSessionlessScheme as the FederationAuthenticationMethod, since that scheme could not be mapped to any Federation Authentication Method (in this case, the administrator would need to correct that and create a mapping) Configuration Mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. Authentication Schemes As discussed in the previous article, during Federation SSO, OIF/IdP will internally forward the user to OAM for authentication/verification and specify which Authentication Scheme to use. OAM will determine if a user needs to be challenged: If the user is not authenticated yet If the user is authenticated but the session timed out If the user is authenticated, but the authentication scheme level of the original authentication is lower than the level of the authentication scheme requested by OIF/IdP So even though an SP requests a specific Federation Authentication Method to be used to challenge the user, if that method is mapped to an Authentication Scheme and that at runtime OAM deems that the user does not need to be challenged with that scheme (because the user is already authenticated, session did not time out, and the session authn level is equal or higher than the one for the specified Authentication Scheme), the flow won’t result in a challenge operation. Protocols SAML 2.0 The SAML 2.0 specifications define the following Federation Authentication Methods for SAML 2.0 flows: urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocol urn:oasis:names:tc:SAML:2.0:ac:classes:Telephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:PersonalTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:PreviousSession urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:Smartcard urn:oasis:names:tc:SAML:2.0:ac:classes:Password urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocolPassword urn:oasis:names:tc:SAML:2.0:ac:classes:X509 urn:oasis:names:tc:SAML:2.0:ac:classes:TLSClient urn:oasis:names:tc:SAML:2.0:ac:classes:PGP urn:oasis:names:tc:SAML:2.0:ac:classes:SPKI urn:oasis:names:tc:SAML:2.0:ac:classes:XMLDSig urn:oasis:names:tc:SAML:2.0:ac:classes:SoftwarePKI urn:oasis:names:tc:SAML:2.0:ac:classes:Kerberos urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport urn:oasis:names:tc:SAML:2.0:ac:classes:SecureRemotePassword urn:oasis:names:tc:SAML:2.0:ac:classes:NomadTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:AuthenticatedTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:SmartcardPKI urn:oasis:names:tc:SAML:2.0:ac:classes:TimeSyncToken Out of the box, OIF/IdP has the following mappings for the SAML 2.0 protocol: Only urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml20-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 2.0 An example of an AuthnRequest message sent by an SP to an IdP with the SP requesting a specific Federation Authentication Method to be used to challenge the user would be: <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://idp.com/oamfed/idp/samlv20" ID="id-8bWn-A9o4aoMl3Nhx1DuPOOjawc-" IssueInstant="2014-03-21T20:51:11Z" Version="2.0">  <saml:Issuer ...>https://acme.com/sp</saml:Issuer>  <samlp:NameIDPolicy AllowCreate="false" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>  <samlp:RequestedAuthnContext Comparison="minimum">    <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">      urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef>  </samlp:RequestedAuthnContext></samlp:AuthnRequest> An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                    urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> An administrator would be able to specify a mapping between a SAML 2.0 Federation Authentication Method and one or more OAM Authentication Schemes SAML 1.1 The SAML 1.1 specifications define the following Federation Authentication Methods for SAML 1.1 flows: urn:oasis:names:tc:SAML:1.0:am:unspecified urn:oasis:names:tc:SAML:1.0:am:HardwareToken urn:oasis:names:tc:SAML:1.0:am:password urn:oasis:names:tc:SAML:1.0:am:X509-PKI urn:ietf:rfc:2246 urn:oasis:names:tc:SAML:1.0:am:PGP urn:oasis:names:tc:SAML:1.0:am:SPKI urn:ietf:rfc:3075 urn:oasis:names:tc:SAML:1.0:am:XKMS urn:ietf:rfc:1510 urn:ietf:rfc:2945 Out of the box, OIF/IdP has the following mappings for the SAML 1.1 protocol: Only urn:oasis:names:tc:SAML:1.0:am:password is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml11-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 1.1 An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameID ...>[email protected]</saml:NameID>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Note: SAML 1.1 does not define an AuthnRequest message. An administrator would be able to specify a mapping between a SAML 1.1 Federation Authentication Method and one or more OAM Authentication Schemes OpenID 2.0 The OpenID 2.0 PAPE specifications define the following Federation Authentication Methods for OpenID 2.0 flows: http://schemas.openid.net/pape/policies/2007/06/phishing-resistant http://schemas.openid.net/pape/policies/2007/06/multi-factor http://schemas.openid.net/pape/policies/2007/06/multi-factor-physical Out of the box, OIF/IdP does not define any mappings for the OpenID 2.0 Federation Authentication Methods. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. An example of an OpenID 2.0 Request message sent by an SP/RP to an IdP/OP would be: https://idp.com/openid?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=checkid_setup&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.realm=https%3A%2F%2Facme.com%2Fopenid&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_request&openid.ax.type.attr0=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.if_available=attr0&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.max_auth_age=0 An example of an Open ID 2.0 SSO Response issued by an IdP/OP would be: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will provide examples on how to configure OIF/IdP for the various protocols, to map OAM Authentication Schemes to Federation Authentication Methods.Cheers,Damien Carru

  Read the article

• Silverlight Cream for January 03, 2011 -- #1021

  - by Dave Campbell

  In this all-Submittal Issue: Gill Cleeren(-2-), Brian Noyes, Brian Genisio, René Schulte, and Andy Schwam(-2-). Above the Fold: Silverlight: "The INavigationContentLoader interface in Silverlight 4" Gill Cleeren WP7: "Sending Windows Phone Screenshots in an Email" René Schulte WCF RIA Services: "WCF RIA Services Part 10 - Exposing Domain Services To Other Clients" Brian Noyes Shoutouts: Want to know what it takes to be an MVP? Check out René Schulte's recap of 2010: Goodbye 2010 - Hello 2011 ... awesome, René! Rui Marinho sent me this post... it's WPF, but wow... WPF and Kinect! Kinect & WPF From SilverlightCream.com: The INavigationContentLoader interface in Silverlight 4 Gill Cleeren has a couple posts up... this first is a break-out of the INavigationContentLoader... what all can be done with it, in addition to the flow of the page load process broken out. Working with the RaiseCanExecuteChanged in MVVM Light (Silverlight) Gill Cleeren' latest post is a discussion of the Silverlight ICommand interface and Laurent Bugnion's RaiseCanExecuteChanged in MVVM Light, with example code. WCF RIA Services Part 10 - Exposing Domain Services To Other Clients Brian Noyes has Part 10 in his WCF RIA Services Tutorial series up at SilverlightShow ... with info on, for example, exposint an OData, SOAP, or REST/JSON endpoint, or how to consume them. Cross-Training in Silverlight & Flex–MVVM vs Presentation Model Brian Genisio finished the year off with this post in his on-going Silverlight/Flex seris comparing MVVM vs Presentation Model .. lots of good MVVM/ViewModel tips and code in this post. Sending Windows Phone Screenshots in an Email René Schulte is the perfect guy to be doing this... how about emailing a screenshot directly from inside an app, for instance Laurent's taking a screenshot from inside an app... too cool, Rene! Windows Phone 7 Application Development Tips Andy Schwam has a post up with tips he learned while creating his first WP7 app... lots of good tips, Gestures, Camera, ISO... check it out, could save you some time and tears :) WP7 Tip: Using the CameraCaptureTask for Windows Phone 7 Andy Schwam's most recent post is WP7 dev as well, and has a bunch of tips and code for using the camera, such as capturing an image, resizing, saving... good stuff. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Silverlight Cream for December 18, 2010 - 2 -- #1013

  - by Dave Campbell

  In this Issue: Michael Washington, Pete Brown, Robby Ingebretsen, Bill Reiss, Jordan Knight, Mike Taulty, Justin Angel, Jeff Blankenburg. Above the Fold: Silverlight: "Creating the Silverlight View Model (MVVM) Control: Calendar Icon" Michael Washington WP7: "United Nations News for Windows Phone 7" Justin Angel Silverlight, WP7/WPF: "CameraPanel: A Parallax Panel for Silverlight, WP7 or WPF" Robby Ingebretsen Shoutouts: Michael Scherotter produced a Silverlight Webcam photo app that he's providing as a free install: A Free Webcam Photo Application in Silverlight From SilverlightCream.com: Creating the Silverlight View Model (MVVM) Control: Calendar Icon Michael Washington has a stunning Calendar Control/Icon up on his blog... walking through how he built it and how you can easily use it in your Silverlight or WP7 app. Strategies for Improving INotifyPropertyChanged in WPF and Silverlight Pete Brown takes a look at INPC and some of the ways this is dealt with to avoid some of the tedius code-reuse errors we all make. CameraPanel: A Parallax Panel for Silverlight, WP7 or WPF Robby Ingebretsen gives up the code for that cool panel he's got on his homepage where the small panels move about seemingly in space. Writing a Windows Phone 7 game? Have a fallback plan Bill Reiss, who has a great WP7 game up - Popper 2 - has a very well-thought-out post up about WP7 'indie' games and the future thereof... great comments from reader/authors as well Automatic template selection – marrying a view to a view model Jordan Knight has the 2nd post of his series on MVVM up... he's talking about it in context of their XamlingCore, but concepts are all good. Rebuilding the PDC 2010 Silverlight Application (Part 5) Mike Taulty's next episode in describing the development of the PDC10 app he wrote is up ... again lots of Blend goodness in this one where he's adding buttons to let the user (us) download whatever is available for the chosen session. United Nations News for Windows Phone 7 In a munificent gesture, Justin Angel not only made his United Nation News app free on the marketplace, but he's posted the source to CodePlex! Justin had sent me a XAP a couple weeks ago, but for some reason, I can no longer sideload so wasn't able to try it until now... too cool, Justin! What I Learned In WP7 – Issue #6 Jeff Blankenburg has his latest "What I learned in WP7" tip up ... and this is one about the marketplace written by someone that's been there and back a few times... Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• SQL SERVER – ColumnStore Index – Batch Mode vs Row Mode

  - by pinaldave

  What do you do when you are in a hurry and hear someone say things which you do not agree or is wrong? Well, let me tell you what I do or what I recently did. I was walking by and heard someone mentioning “Columnstore Index are really great as they are using Batch Mode which makes them seriously fast.” While I was passing by and I heard this statement my first reaction was I thought Columnstore Index can use both – Batch Mode and Row Mode. I stopped by even though I was in a hurry and asked the person if he meant that Columnstore indexes are seriously fast because they use Batch Mode all the time or Batch Mode is one of the reasons for Columnstore Index to be faster. He responded that Columnstore Indexes can run only in Batch Mode. However, I do not like to confront anybody without hearing their complete story. Honestly, I like to do information sharing and avoid confronting as much as possible. There are always ways to communicate the same positively. Well, this is what I did, I quickly pull up my earlier article on Columnstore Index and copied the script to SQL Server Management Studio. I created two versions of the script. 1) Very Large Table 2) Reasonably Small Table. I a query which uses columnstore index on both of the versions. I found very interesting result of the my tests. I saved my tests and sent it to the person who mentioned about that Columnstore Indexes are using Batch Mode only. He immediately acknowledged that indeed he was incorrect in saying that Columnstore Index uses only Batch Mode. What really caught my attention is that he also thanked me for sending him detail email instead of just having argument where he and I both were standing in the corridor and neither have no way to prove any theory. Here is the screenshots of the both the scenarios. 1) Columnstore Index using Batch Mode 2) Columnstore Index using Row Mode Here is the logic behind when Columnstore Index uses Batch Mode and when it uses Row Mode. A batch typically represents about 1000 rows of data. Batch mode processing also uses algorithms that are optimized for the multicore CPUs and increased memory throughput.  Batch mode processing spreads metadata access costs and overhead over all the rows in a batch.  Batch mode processing operates on compressed data when possible leading superior performance. Here is one last point – Columnstore Index can use Batch Mode or Row Mode but Batch Mode processing is only available in Columnstore Index. I hope this statement truly sums up the whole concept. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Check Your LIC Policy Status Through SMS

  - by Suganya

  Most of us in India hold at least one Life Insurance Policy today. While we all know everything gets computerized these days, LIC also supports payment via internet. You can view details about how payment is made through internet here. Few years back LIC started supporting SMS’es as well. Now you really don’t need to have internet rather check your LIC policy status while on road by sending just one SMS to 56677. Now that we know LIC answers to our SMS, lets see the format in which we have to send our SMS and their meaning. The format in which the SMS has to be sent is ASKLIC <Policy No> [PREMIUM/REVIVAL/BONUS/LOAN/NOM] Send any one of the following [PREMIUM/REVIVAL/BONUS/LOAN/NOM] to get the details. For instance, If you send ASKLIC <Policy No> Premium , it would return your Installment premium under policy ASKLIC <Policy No> Revival , it would check If policy is lapsed and return revival amount payable ASKLIC <Policy No> Bonus , it would check and return the amount of Bonus invested ASKLIC <Policy No> Loan , it would check and return the amount available as Loan ASKLIC <Policy No> NOM , it would check and return the details of Nomination Also, as everyone knows there are lots of pension schemes as well available in LIC and if one is interested in getting the pension details, then the format for sending the SMS is LICPension <Policy No> [STAT /ECDUE/ANNPD/PDTHRU/AMOUNT/CHQRET] For instance, If you send LICPension <Policy No> STAT gives you the IPP Policy status details LICPension <Policy No> ECDUE gives you the existence certificate due details LICPension <Policy No> ANNPD gives you the last annuity released date LICPension <Policy No> CHQ/ECS/NEFT (PDTHRU) gives the details about annuity payment through LICPension <Policy No> AMOUNT gives details about annuity amount LICPension <Policy No> CHQRET gives details about cheque return information Just with one SMS get all your policy details and make life easier. Each SMS that you send would be charged depending on your service provider. This article titled,Check Your LIC Policy Status Through SMS, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big

  - by pinaldave

  After reading my earlier article SQL SERVER – master Database Log File Grew Too Big, I received an email recently from another reader asking why does the log file of model database grow every day when he is not carrying out any operation in the model database. As per the email, he is absolutely sure that he is doing nothing on his model database; he had used policy management to catch any T-SQL operation in the model database and there were none. This was indeed surprising to me. I sent a request to access to his server, which he happily agreed for and within a min, we figured out the issue. He was taking the backup of the model database every day taking the database backup every night. When I explained the same to him, he did not believe it; so I quickly wrote down the following script. The results before and after the usage of the script were very clear. What is a model database? The model database is used as the template for all databases created on an instance of SQL Server. Any object you create in the model database will be automatically created in subsequent user database created on the server. NOTE: Do not run this in production environment. During the demo, the model database was in full recovery mode and only full backup operation was performed (no log backup). Before Backup Script Backup Script in loop DECLARE @FLAG INT SET @FLAG = 1 WHILE(@FLAG < 1000) BEGIN BACKUP DATABASE [model] TO  DISK = N'D:\model.bak' SET @FLAG = @FLAG + 1 END GO After Backup Script Why did this happen? The model database was in full recovery mode and taking full backup is logged operation. As there was no log backup and only full backup was performed on the model database, the size of the log file kept growing. Resolution: Change the backup mode of model database from “Full Recovery” to “Simple Recovery.”. Take full backup of the model database “only” when you change something in the model database. Let me know if you have encountered a situation like this? If so, how did you resolve it? It will be interesting to know about your experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• XEROX Phaser 3160N installation on UBUNTU 12.04 LTE machine

  - by Greg Verrall

  I have recently had windows XP die on one of my machines, and have installed Linux UBUNTU. The OS works great, except for installing the Xerox Phaser 3160N printer. The OS can find and install the network printer, but when I print a test page, it tells me “Internal Error – Please use the correct driver”. I have the correct drivers, as your support team have sent me the link, (http://www.support.xerox.com/support/phaser-3160/file-download/enau.html?operatingSystem=linux&fileLanguage=en_GB&contentId=105724&from=downloads&viewArchived=false) but I cannot install these drivers to run the printer. These are the instructions from the online guide for installing on a Linux machine: 1. Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set. 2. Insert the supplied software CD into your CD-ROM drive. 3. Double-click CD-ROM icon that appears on your Linux desktop. 4. Double-click the Linux folder. 5. Double-click the install.sh icon. 6. The Xerox Installer window opens. Click Continue. 7. The Add printer wizard window opens. Click Next. 8. Select Network printer and click Search button. 9. The Printer’s IP address and model name appears on list field. 10. Select your machine and click Next. I get as far as step 5, and step 6 never happens, if it did, it would be very easy from there. There are options to add additional software to UBUNTU, however it does not recognise the installation CD as valid when I try to add it as a source. Any ideas on who can help me? regards, Greg Verrall

  Read the article

• SQL Contest – Win USD 300 Worth Gift – Cartoon Contest is Back

  - by pinaldave

  There are two excellent contests and we have lots of winning to do this year end. 1) Win USD 25 Amazon Gift Cards (10 Units) This is very simple, you just have to download SQL Server DB Optimizer. That’s it! There are only two conditions: You must have a valid email address. As USD 25 Amazon Gift Card will be sent to the same address. Download DB Optimizer between today and Dec 8, 2012. Link to Download DB Optimizer. Every day one winner will be notified about their winning USD 25 Amazon Gift Cards for next 10 days. 2) Win Star Wars R2-D2 Inflatable R/C This the coolest thing to win. I personally want one but as I am running a contest, I can’t  participate. You get this cool Remote Controlled Device – you just have to answer following cartoon contest. Read the complete story and think what will be the answer provided by the smart employee. There are only two conditions: Leave your answer in the comment area of this blog post (every comment will be hidden till Dec 8, 2012). Please leave your answer in the comment area between today and Dec 8, 2012. Remember you can participate as many times as you want. Make sure that your answer is correct and creative. The most creative answer will be selected. The decision of contest owner will be final. We may have runner’s up prices but for the moment let us try to win R2-D2. Here is the cool video of R2D2. Now here is the cartoon story, please follow the story and complete the very last cartoon template. Your answer should be correct and should be creative. However, the ideal answer will not be longer than one or two sentences. Hint: (Hint) Well, Leave your answer in the comment area of this blog post. If you do not win R2D2, trust me there are chances you may win a surprise gift from me. Remember your answer should be correct and should be creative. However, the ideal answer will not be longer than one or two sentences. Last day to participate in both of the contest is Dec 8, 2012. We will announce the winner in the week of December 10. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

  Read the article

• Silverlight Cream for June 15, 2010 -- #882

  - by Dave Campbell

  In this Issue: Colin Eberhardt Zoltan Arvai, Marcel du Preez, Mark Tucker, John Papa, Phil Middlemiss, Andy Beaulieu, and Chad Campbell. From SilverlightCream.com: Throttling Silverlight Mouse Events to Keep the UI Responsive Colin Eberhardt sent me this link to his latest at Scott Logic... about how to throttle Silverlight -- no not that, you'd have to go to one of the *other* blogs for that :) ... this is throttling the mouse, particularly the mouse wheel to keep the UI from freezing up ... check out the demos, you'll want to read the code Data Driven Applications with MVVM Part I: The Basics Zoltan Arvai started a series of tutorials on Data-Driven Applications with MVVM at SilverlightShow... this is number 1, and it looks like it's going to be a good series to read. Red-To-Green scale using an IValueConverter Marcel du Preez has an interesting post up at SilverlightShow using an IValueConverter to do a red/yellow/green progress bar ... this is pretty cool. Infragistics XamWebOutlookBar & Caliburn With assistance from Rob Eisenburg, Mark Tucker was able to build a Caliburn sample including the Infragistics XamWebOutlookBar, and he's sharing his experience (and code) with all of us. Printing Tip – Handling User Initiated Dialogs Exceptions John Papa responded to a common printing problem by writing it up in his blog. Note this problem quite often appears during debug, so check it out... John also has a quick tip on an update to the PrintAPI in Silverlight 4. Automatic Rectangle Radius X and Y Phil Middlemiss has another great Blend post up -- this one on rounding off buttons... they look great to me, but he's looking for advice -- how about that Phil? They look great to me :) WP7 Back Button in Games Planning on selling 'stuff' in the Windows Phone Marketplace? Are you familiar with the required use of the Back Button? How about in a game? ... Andy Beaulieu discusses all this and has some code you'll want to use. Windows Phone 7 – Call Phone Number from HyperlinkButton Chad Campbell [no relation :) ] is discussing dialing a number from a hyperlink in WP7 - oh yeah, it's a phone as well :) -- I think I've only seen a number attempt to be called -- hmm... and we're not yet either because we all have emulators, but this is a good intro to the functionality for when we may actually have devices! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Using MAC Authentication for simple Web API’s consumption

  - by cibrax

  For simple scenarios of Web API consumption where identity delegation is not required, traditional http authentication schemas such as basic, certificates or digest are the most used nowadays. All these schemas rely on sending the caller credentials or some representation of it in every request message as part of the Authorization header, so they are prone to suffer phishing attacks if they are not correctly secured at transport level with https. In addition, most client applications typically authenticate two different things, the caller application and the user consuming the API on behalf of that application. For most cases, the schema is simplified by using a single set of username and password for authenticating both, making necessary to store those credentials temporally somewhere in memory. The true is that you can use two different identities, one for the user running the application, which you might authenticate just once during the first call when the application is initialized, and another identity for the application itself that you use on every call. Some cloud vendors like Windows Azure or Amazon Web Services have adopted an schema to authenticate the caller application based on a Message Authentication Code (MAC) generated with a symmetric algorithm using a key known by the two parties, the caller and the Web API. The caller must include a MAC as part of the Authorization header created from different pieces of information in the request message such as the address, the host, and some other headers. The Web API can authenticate the caller by using the key associated to it and validating the attached MAC in the request message. In that way, no credentials are sent as part of the request message, so there is no way an attacker to intercept the message and get access to those credentials. Anyways, this schema also suffers from some deficiencies that can generate attacks. For example, brute force can be still used to infer the key used for generating the MAC, and impersonate the original caller. This can be mitigated by renewing keys in a relative short period of time. This schema as any other can be complemented with transport security. Eran Rammer, one of the brains behind OAuth, has recently published an specification of a protocol based on MAC for Http authentication called Hawk. The initial version of the spec is available here. A curious fact is that the specification per se does not exist, and the specification itself is the code that Eran initially wrote using node.js. In that implementation, you can associate a key to an user, so once the MAC has been verified on the Web API, the user can be inferred from that key. Also a timestamp is used to avoid replay attacks. As a pet project, I decided to port that code to .NET using ASP.NET Web API, which is available also in github under https://github.com/pcibraro/hawknet Enjoy!.

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >