Search Results

Search found 4462 results on 179 pages for 'snow crash'.

Page 168/179 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • DHCP and DNS services configuration for VOIP system, windows domain, etc

    - by Stemen
    My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

    Read the article

  • PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

    - by cr0z3r
    Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

    Read the article

  • Kernel panic when bringing up DRBD resource

    - by sc.
    I'm trying to set up two machines synchonizing with DRBD. The storage is setup as follows: PV - LVM - DRBD - CLVM - GFS2. DRBD is set up in dual primary mode. The first server is set up and running fine in primary mode. The drives on the first server have data on them. I've set up the second server and I'm trying to bring up the DRBD resources. I created all the base LVM's to match the first server. After initializing the resources with `` drbdadm create-md storage I'm bringing up the resources by issuing drbdadm up storage After issuing that command, I get a kernel panic and the server reboots in 30 seconds. Here's a screen capture. My configuration is as follows: OS: CentOS 6 uname -a Linux host.structuralcomponents.net 2.6.32-279.5.2.el6.x86_64 #1 SMP Fri Aug 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux rpm -qa | grep drbd kmod-drbd84-8.4.1-2.el6.elrepo.x86_64 drbd84-utils-8.4.1-2.el6.elrepo.x86_64 cat /etc/drbd.d/global_common.conf global { usage-count yes; # minor-count dialog-refresh disable-ip-verification } common { handlers { pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o /proc/sysrq-trigger ; halt -f"; # fence-peer "/usr/lib/drbd/crm-fence-peer.sh"; # split-brain "/usr/lib/drbd/notify-split-brain.sh root"; # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root"; # before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k"; # after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh; } startup { # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb become-primary-on both; wfc-timeout 30; degr-wfc-timeout 10; outdated-wfc-timeout 10; } options { # cpu-mask on-no-data-accessible } disk { # size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes # disk-drain md-flushes resync-rate resync-after al-extents # c-plan-ahead c-delay-target c-fill-target c-max-rate # c-min-rate disk-timeout } net { # protocol timeout max-epoch-size max-buffers unplug-watermark # connect-int ping-int sndbuf-size rcvbuf-size ko-count # allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri # after-sb-1pri after-sb-2pri always-asbp rr-conflict # ping-timeout data-integrity-alg tcp-cork on-congestion # congestion-fill congestion-extents csums-alg verify-alg # use-rle protocol C; allow-two-primaries yes; after-sb-0pri discard-zero-changes; after-sb-1pri discard-secondary; after-sb-2pri disconnect; } } cat /etc/drbd.d/storage.res resource storage { device /dev/drbd0; meta-disk internal; on host.structuralcomponents.net { address 10.10.1.120:7788; disk /dev/vg_storage/lv_storage; } on host2.structuralcomponents.net { address 10.10.1.121:7788; disk /dev/vg_storage/lv_storage; } /var/log/messages is not logging anything about the crash. I've been trying to find a cause of this but I've come up with nothing. Can anyone help me out? Thanks.

    Read the article

  • Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

    - by Mike C
    I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

    Read the article

  • Cannot Start MySQL Server on Fresh MAMP Install

    - by alexpelan
    I'm using Mac OS X 10.6.2 on my Macbook Pro. I can get the apache server to start, but not the mysql server, on both the default apache and default MAMP ports. When I try to go to my start page, I get the message "Error: Could not connect to MySQL server!" . Here's what's in my mysql error log: 00513 02:00:07 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended 100513 02:00:16 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 100513 2:00:16 [Warning] The syntax '--log_slow_queries' is deprecated and will be removed in a future release. Please use '--slow_query_log'/'--slow_query_log_file' instead. 100513 2:00:16 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 100513 2:00:16 [Warning] One can only use the --user switch if running as root 100513 2:00:16 [Note] Plugin 'FEDERATED' is disabled. 100513 2:00:16 [Note] Plugin 'ndbcluster' is disabled. InnoDB: Error: log file /usr/local/mysql/data/ib_logfile0 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 16777216 bytes! 100513 2:00:16 [ERROR] Plugin 'InnoDB' init function returned error. 100513 2:00:16 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 100513 2:00:16 [ERROR] /Applications/MAMP/Library/libexec/mysqld: unknown option '--skip-bdb' 100513 2:00:16 [ERROR] Aborting 100513 2:00:16 [Note] /Applications/MAMP/Library/libexec/mysqld: Shutdown complete 100513 02:00:16 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended A couple of things: 1) There are a bunch of different .cnf files that come with MAMP (my-huge, my-medium, etc.)...how can I tell which one is actually being used? 2) I deleted the ib_logfile0 and ib_logfile1 as recommended by another post on serverfault, and then ended up with more errors: 100519 16:01:30 InnoDB: Log file /usr/local/mysql/data/ib_logfile0 did not exist: new to be created InnoDB: Setting log file /usr/local/mysql/data/ib_logfile0 size to 16 MB InnoDB: Database physically writes the file full: wait... 100519 16:01:30 InnoDB: Log file /usr/local/mysql/data/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /usr/local/mysql/data/ib_logfile1 size to 16 MB InnoDB: Database physically writes the file full: wait... InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100519 16:01:31 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 100519 16:01:31 InnoDB: Started; log sequence number 0 44556 100519 16:01:31 [ERROR] /Applications/MAMP/Library/libexec/mysqld: unknown option '--skip-bdb' 100519 16:01:31 [ERROR] Aborting And then I got this the next time I tried to run it: InnoDB: Unable to lock /usr/local/mysql/data/ibdata1, error: 35 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. Sorry that this is a lot of information, but I don't want to leave anything out. Thanks.

    Read the article

  • apache2.2 + php5 , process never die and stay blocked to LOCK_SH

    - by Givre
    Server version: Apache/2.2.22 (Unix) Server built: Mar 28 2012 16:31:45 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.6, APR-Util 1.4.1 Compiled using: APR 1.4.6, APR-Util 1.4.1 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/opt/apache2" -D SUEXEC_BIN="/opt/apache2/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" Php5.2.17. Using mod_php5 as a DSO module compiled Problem: On shared webhosting, a lot of apache2 process never stop or die and they waiting as long as apache2 restart. Strace of one of theses process: access("tmp/meta_cache.txt", F_OK) = 0 getcwd("/home/exemple.com/htdocs"..., 4096) = 34 lstat("/var", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/var/www", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/home", {st_mode=S_IFDIR|0755, st_size=1715, ...}) = 0 lstat("/home/exemple.com", {st_mode=S_IFDIR|0755, st_size=16, ...}) = 0 lstat("/home/exemple.com/htdocs", {st_mode=S_IFDIR|0770, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp", {st_mode=S_IFDIR|0777, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp/meta_cache.txt", {st_mode=S_IFREG|0666, st_size=8901, ...}) = 0 lstat("/var", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/var/www", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/home", {st_mode=S_IFDIR|0755, st_size=1715, ...}) = 0 lstat("/home/exemple.com", {st_mode=S_IFDIR|0755, st_size=16, ...}) = 0 lstat("/home/exemple.com/htdocs", {st_mode=S_IFDIR|0770, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp", {st_mode=S_IFDIR|0777, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp/meta_cache.txt", {st_mode=S_IFREG|0666, st_size=8901, ...}) = 0 lstat("/var", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/var/www", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/home", {st_mode=S_IFDIR|0755, st_size=1715, ...}) = 0 lstat("/home/exemple.com", {st_mode=S_IFDIR|0755, st_size=16, ...}) = 0 getcwd("/home/exemple.com/htdocs"..., 4096) = 34 lstat("/var", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/var/www", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 lstat("/home", {st_mode=S_IFDIR|0755, st_size=1715, ...}) = 0 lstat("/home/exemple.com", {st_mode=S_IFDIR|0755, st_size=16, ...}) = 0 lstat("/home/exemple.com/htdocs", {st_mode=S_IFDIR|0770, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp", {st_mode=S_IFDIR|0777, st_size=51, ...}) = 0 lstat("/home/exemple.com/htdocs/tmp/meta_cache.txt", {st_mode=S_IFREG|0666, st_size=8901, ...}) = 0 open("/home/exemple.com/htdocs/tmp/meta_cache.txt", O_RDONLY) = 10905 fstat(10905, {st_mode=S_IFREG|0666, st_size=8901, ...}) = 0 lseek(10905, 0, SEEK_CUR) = 0 flock(10905, LOCK_SH) = The process never die, and stay like this. All files are on NFS V3 I'dont know how to solve this problem or find more informations. The effect is that all apache2 process become used and apache2 crash totaly . Thanks for you help.

    Read the article

  • Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed!

    - by meder
    I restarted my VPS box ( manually/hard restart ) and ever since, mysql fails to start for whatever reason. I did a tail /var/log/syslog and I get this: Feb 20 11:49:33 kyrgyznews mysqld[11461]: ) ;InnoDB: End of page dump 575 Feb 20 11:49:33 kyrgyznews mysqld[11461]: 110220 11:49:33 InnoDB: Page checksum 1045788239, prior-to-4.0.14-form checksum 236985105 576 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: stored checksum 1178062585, prior-to-4.0.14-form stored checksum 236985105 577 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page lsn 0 10651, low 4 bytes of lsn at page end 10651 578 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page number (if stored to page already) 3, 579 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 580 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Database page corruption on disk or a failed 581 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: file read of page 3. 582 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: You may have to recover from a backup. 583 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: It is also possible that your operating 584 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: system has corrupted its own file cache 585 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: and rebooting your computer removes the 586 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: error. 587 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: If the corrupt page is an index page 588 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: you can also try to fix the corruption 589 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: by dumping, dropping, and reimporting 590 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: the corrupt table. You can use CHECK 591 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: TABLE to scan your table for corruption. 592 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: See also InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html 593 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: about forcing recovery. 594 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Ending processing because of a corrupt database page. 595 Feb 20 11:49:33 kyrgyznews mysqld_safe[11469]: ended 596 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in 597 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: ^G/usr/bin/mysqladmin: connect to server at 'localhost' failed 598 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' 599 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! 600 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 601 Feb 20 11:49:56 kyrgyznews mysqld_safe[13437]: started 602 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: The log sequence number in ibdata files does not match 603 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: the log sequence number in the ib_logfiles! 604 Feb 20 11:49:56 kyrgyznews mysqld[13440]: 110220 11:49:56 InnoDB: Database was not shut down normally! 605 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Starting crash recovery. 606 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Reading tablespace information from the .ibd files... 607 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Restoring possible half-written data pages from the doublewrite 608 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: buffer... 609 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Database page corruption on disk or a failed 610 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: file read of page 3. 611 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: You may have to recover from a backup. I have looked at the page it referenced, http://dev.mysql.com/doc/refman/5.0/en/forcing-innodb-recovery.html, but before messing with any settings I was wondering what experienced DBAs would suggest doing? Is there any harm in forcing the recovery? PS - I did not make any updates to mysql. Version is mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2.

    Read the article

  • IIS 7.5 Manager crashes when adding a custom error page

    - by dig412
    I'm running a local IIS 7.5 server in Win 7 Pro, and I'm trying to add a custom error page for 403 responses. When I click OK to add a custom error page for my site, IIS Manager just vanishes. The server is still running, and I can re-start IIS Manager, but the new page has not been saved. I've also tried adding it directly to web.config, but that just gives me The page cannot be displayed because an internal server error has occurred. Does anyone know why this might be happening? Edit: The event log implies that an invalid character in the path caused the crash, but It occured even when I copied & pasted a path from a valid entry. Application error log: IISMANAGER_CRASH IIS Manager terminated unexpectedly. Exception:System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. --- System.ArgumentException: Illegal characters in path. at System.IO.Path.CheckInvalidPathChars(String path) at System.IO.Path.IsPathRooted(String path) at Microsoft.Web.Management.Iis.CustomErrors.CustomErrorsForm.OnAccept() at Microsoft.Web.Management.Client.Win32.TaskForm.OnOKButtonClick(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Form.ShowDialog(IWin32Window owner) at Microsoft.Web.Management.Host.UserInterface.ManagementUIService.ShowDialogInternal(Form form, IWin32Window parent) at Microsoft.Web.Management.Host.UserInterface.ManagementUIService.Microsoft.Web.Management.Client.Win32.IManagementUIService.ShowDialog(DialogForm form) at Microsoft.Web.Management.Client.Win32.ModulePage.ShowDialog(DialogForm form) at Microsoft.Web.Management.Iis.CustomErrors.CustomErrorsPage.AddCustomError() --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at Microsoft.Web.Management.Client.TaskList.InvokeMethod(String methodName, Object userData) at Microsoft.Web.Management.Host.UserInterface.Tasks.MethodTaskItemLine.InvokeMethod() at System.Windows.Forms.LinkLabel.OnMouseUp(MouseEventArgs e) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Label.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.Web.Management.Host.Shell.ShellApplication.Execute(Boolean localDevelopmentMode, Boolean resetPreferences, Boolean resetPreferencesNoLaunch) Process:InetMgr

    Read the article

  • apache webserver unresponsible with server-status showing all child processes waiting for connection

    - by Jeff
    My setup: i have 3 nearly identical webserver machines serving the same high loaded dynamic website with simple load balancing over dns. The service has been working for over two ears with the same apache config. apache2, php5, ubuntu 8.04 linux 2.6.24-29-server My problem: since about two weeks i'm experiencing problems with this config. Nearly every day i have one small moment about 5 minutes, in which the website is unreachable. I'm still able to login to the servers over ssh. If i run htop, i see the machine simply doing nothing. i have about 1000 apache processes running, but no cpu activity. i've used the apache mod_status to debug this situation. the process scoreboard looks like this: _C.___K_______________________R._______.__K_K____K___C_______.__ _______C__________.___________________________________.________C _.____K__________K___K_WK_____._K_____________________________._ W______K__________K________.____________________._______C_______ _C_.__K__K____.._.._____________________________________C_______ _R___________K___.______C________.C_________.______._____C______ ____________KKC____K_____K__WC_________________C_____.__.____.__ _____________________C_________K______.____C______._____________ _.___C____.___.___________________________.K______.____K________ W__.___________________C.__.____K________K_______R_._.__._______ __C__C_.__________C__C_______._____W______________C_.___C_______ ____.______C_____________C________.____C____________.________._K __.__________.K_____________K_________._____C____.K__________KW_ __K.W________R_________._______.___W___________.____.__K_____W__ W___.___..________W____K Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process So the most of the processes are just waiting for connection. after about 5 minutes the situation will return to normal: i have lot least processes on every machine, the most workers have the "."-status (meaing they are open to process a request) and of course the website is reachable! so i'm trying to find something in the logs, but there is simply nothing... the apache access log is silent for about 4 minutes, the same is for the error log. i also can not figure out anything wrong in other system logs. the situation is the same on all 3 webservers (all of them have this load peak and unresposibility at the same time), so i do not thing this is hardware related. but i think, this might be related to some network (tcp) issue. any ideas? EDIT: some more information, that i have just discovered: it has just happened again. and i was able to verify that i'm also not able to connect locally when this problem occurs. i have made some connection statistics with the following command after it happend netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 109 CLOSE_WAIT 2652 ESTABLISHED 2 FIN_WAIT1 11 LAST_ACK 12 LISTEN 91 SYN_RECV 1 SYN_SENT 16 TIME_WAIT If i execute the same command some time later, i have something like this: 4 CLOSING 108 ESTABLISHED 18 FIN_WAIT1 182 FIN_WAIT2 37 LAST_ACK 12 LISTEN 50 SYN_RECV 11276 TIME_WAIT So in the normal situation i have only 100-200 open connections by clients beeing handled by apache in this moment. when i have this "crash", i have a lot more connections. what is the best way to analyse this? EDIT2: the important lines in apache2.conf are: KeepAlive On MaxKeepAliveRequests 20 KeepAliveTimeout 1 <IfModule mpm_prefork_module> ServerLimit 920 StartServers 30 MinSpareServers 80 MaxSpareServers 120 MaxClients 920 MaxRequestsPerChild 700 </IfModule> it is an apache2 prefork with php_mod. the server has 8GB ram and a 4gb swap partition.

    Read the article

  • Centos 7. Freeradius fails to start on boot

    - by Alex
    I was messing around with FreeRADIUS and MySQL (MariaDB) and it seems FreeRADIUS service can't start properly on startup. But it starts fine using root user or in debug mode (radiusd -X) and works just fine! Debug mode shows no errors. systemctl command shows that radiusd.service has failed to start. /var/log/messages output: Aug 21 15:52:29 nexus-test systemd: Starting The Apache HTTP Server... Aug 21 15:52:29 nexus-test systemd: Starting MariaDB database server... Aug 21 15:52:29 nexus-test systemd: Starting FreeRADIUS high performance RADIUS server.... Aug 21 15:52:29 nexus-test systemd: Started OpenSSH server daemon. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Logging to '/var/log/mariadb/mariadb.log'. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql Aug 21 15:52:30 nexus-test systemd: Started Postfix Mail Transport Agent. Aug 21 15:52:30 nexus-test avahi-daemon[604]: Registering new address record for fe80::250:56ff:fe85:e4af on eth0.*. Aug 21 15:52:30 nexus-test systemd: radiusd.service: control process exited, code=exited status=1 Aug 21 15:52:30 nexus-test systemd: Failed to start FreeRADIUS high performance RADIUS server.. Aug 21 15:52:30 nexus-test systemd: Unit radiusd.service entered failed state. Aug 21 15:52:31 nexus-test kdumpctl: kexec: loaded kdump kernel Aug 21 15:52:31 nexus-test kdumpctl: Starting kdump: [OK] Aug 21 15:52:31 nexus-test systemd: Started Crash recovery kernel arming. Aug 21 15:52:31 nexus-test systemd: Started The Apache HTTP Server. Aug 21 15:52:31 nexus-test systemd: Started MariaDB database server. /var/log/radius/radius.log output: Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Attempting to connect to database "radius" Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Opening additional connection (0) Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Couldn't connect socket to MySQL server radius@localhost:radius Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Mysql error 'Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)' Thu Aug 21 15:24:16 2014 : Error: rlm_sql (sql): Opening connection failed (0) Thu Aug 21 15:24:16 2014 : Error: /etc/raddb/mods-enabled/sql[47]: Instantiation failed for module "sql" After seeing this I tried to replicate the problem, killed mariadb.service and started to run debug mode again. And it spits out the same problem as in the radius.log. I tried disabling iptables and firewalld and rebooting, but no luck: systemctl disable iptables systemctl disable firewalld So maybe the problem is in the process startup order or delay of some kind. Maybe FreeRADIUS's SQL module can't connect to not yet started MariaDB? If it, how can I fix this? In earlier versions of RHEL/CENTOS I know you easily see service start order in like rc.d or stuff, now IDK. I am new to this fancy "systemd", "systemctl", "firewalld" stuff Centos 7 introduced so sorry I'm a little bit confused. Also this new FreeRADIUS 3 structure... PS. MariaDB is enabled on startup, credentials in FR DB configuration are correct A little update: cat /etc/systemd/system/multi-user.target.wants/radiusd.service output: [Unit] Description=FreeRADIUS high performance RADIUS server. After=syslog.target network.target [Service] Type=forking PIDFile=/var/run/radiusd/radiusd.pid ExecStartPre=-/bin/chown -R radiusd.radiusd /var/run/radiusd ExecStartPre=/usr/sbin/radiusd -C ExecStart=/usr/sbin/radiusd -d /etc/raddb ExecReload=/usr/sbin/radiusd -C ExecReload=/bin/kill -HUP $MAINPID [Install] WantedBy=multi-user.target

    Read the article

  • How to stop Apache from crashing my entire server?

    - by CyberShadow
    I maintain a Gentoo server with a few services, including Apache. It's fairly low-end (2GB of RAM and a low-end CPU with 2 cores). My problem is that, despite my best efforts, an over-loaded Apache crashes the entire server. In fact, at this point I'm close to being convinced that Linux is a horrible operating system that isn't worth anyone's time looking for stability under load. Things I tried: Adjusting oom_adj for the root Apache process (and thus all its children). That had close to no effect. When Apache was overloaded it would bring the system to a grind, as the system paged out everything else before it got to kill anything. Turning off swap. Didn't help, it would unload memory paged to binaries of processes and other files on /, thus causing the same effect. Putting it in a memory-limited cgroup (limited to 512 MB of RAM, 1/4th of the total). This "worked", at least in my own stress tests - except the server keeps crashing under load (basically stalling all other processes, inaccessible via SSH, etc.) Running it with idle I/O priority. This wasn't a very good idea in the end, because it just caused the system load to climb indefinitely (into the thousands) with almost no visible effect - until you tried to access an unbuffered part of the disk. This caused the task to freeze. (So much for good I/O scheduling, eh?) Limiting the number of concurrent connections to Apache. Setting the number too low caused web sites to become unresponsive due to most slots being occupied with long requests (file downloads). I tried various Apache MPMs without much success (prefork, event, itk). Switching from prefork/event+php-cgi+suphp to itk+mod_php. This improved performance, but didn't solve the actual problem. Switching I/O schedulers (cfq to deadline). Just to stress this out: I don't care if Apache itself goes down under load, I just want the rest of my system to remain stable. Of course, having Apache recover quickly after a brief period of intensive load would be great to have, but one step at a time. Right now I am mostly dumbfounded by how can humanity, in this day and age, design an operating system where such a seemingly simple task (don't allow one system component to crash the entire system) seems practically impossible - or at least, very hard to do. Please don't suggest things like VMs or "BUY MORE RAM". Some more information gathered with a friend's help: The processes hang when the cgroup oom killer is invoked. Here's the call trace: [<ffffffff8104b94b>] ? prepare_to_wait+0x70/0x7b [<ffffffff810a9c73>] mem_cgroup_handle_oom+0xdf/0x180 [<ffffffff810a9559>] ? memcg_oom_wake_function+0x0/0x6d [<ffffffff810aa041>] __mem_cgroup_try_charge+0x32d/0x478 [<ffffffff810aac67>] mem_cgroup_charge_common+0x48/0x73 [<ffffffff81081c98>] ? __lru_cache_add+0x60/0x62 [<ffffffff810aadc3>] mem_cgroup_newpage_charge+0x3b/0x4a [<ffffffff8108ec38>] handle_mm_fault+0x305/0x8cf [<ffffffff813c6276>] ? schedule+0x6ae/0x6fb [<ffffffff8101f568>] do_page_fault+0x214/0x22b [<ffffffff813c7e1f>] page_fault+0x1f/0x30 At this point, the apache memory cgroup is practically deadlocked, and burning CPU in syscalls (all with the above call trace). This seems like a problem in the cgroup implementation...

    Read the article

  • Why would VMWare to go defunct? How to recover from/prevent it?

    - by Josh
    I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

    Read the article

  • mysqld service crashes on restart, after importing mysqldump #innodb

    - by ubunut
    I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

    Read the article

  • Why does my computer run slowly and freeze sometimes?

    - by Brae
    EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

    Read the article

  • AMD Catalyst 13.9 installation failure

    - by Simon Verbeke
    Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

    Read the article

  • A failed disk (Pay for professional service or SpinRite?)(new edit)

    - by huggie
    EDIT: After much negotiating and begging and seeing through promotion smoke screen, thanks to the nice representative who took my case, I now know that the engineer has already fixed my NTFS partition (I guess it might be a bad block in the partition table?). She told me that the problem was considered minor, and I should be able to boot normally and just copy stuff out. Whew..I'm glad I didn't agree to the NTD $16,000 deal. New question (should this be in a new thread?): is it safer to use the linux "dd" command or is it better to boot normally into Windows XP and just copy stuff out? EDIT2: Thanks to all the help. I give the best answer to Console as it's most directed related to my question. But many suggestion are helpful and informational. ---- ORIGINAL POST BELOW --- Hi, in my previous post (You don't need to read but it's at http://superuser.com/questions/48838/windows-xp-a-disk-read-error-occurred), I said that my hard disk was not booting and is showing "a disk read error occurred". I took it to a recovery professional. A representative responded today told me that the NTFS partitions have a "NTFS partition system crash". I have no idea what that means. The engineer handling my drive will not be available for contact till tomorrow. Now the company charges me NTD (New Taiwan Dollar) $16,000 to recover lost data, that's kind of a lot considering that my graduate student monthly stipend is currently NTD $32,000 (max. allowed by regulation, may be lower, may change depend on funding). Now I'm weighting in between the options. Option A: let the professional recovers it with the half of my monthly stipend. If file/directories I designated are not recovered I don't pay a penny. (other than the initial examination fee of NTD $1000 which I've already paid.) Option B: let me try SpinRite, if failed, back to Option A. I spoke to the representative at the company they recommended me not to handle it on my own (yeah of course that's what they all want to say, right?), and at the price tag the disk error is probably relatively minor and data recoverable. But the representative really did not have detailed information of the disk failure so I didn't take her recommendation readily. Though one thing I heed was that she said that what they would do is to duplicate the disk before attempting discovery, so there would be no data loss (Is this true? can't duplicating invoke further data loss?). That sounds very good to me. Or maybe a third option: Option C: Negotiate with them to pay them to duplicate the disk hopefully for a much smaller price tag. Let me try SpinRite, if failed, back to Option A. This is a difficult decision. Ultimately I want my data back, but if a cheaper way is available to achieve the same thing... Can operating with SpinRite also corrupt data in someway? I've no idea what happened to my drive. I'll attempt to contact the engineer and hope to get it clarified and make an edit here.

    Read the article

  • Apache Getting Bogged Down By Certain Script (Wp-Cron.php) - How To Kill Process Automatically

    - by user50037
    I have a server that is running a number of wordpress blogs, and a number of them have several hundred/thousand posts. Every couple of days, the server slows to a crawl due to a file being run on Wordpress called WP-cron.php. My entire apache process log turns into this : http:// imgur.com/A7K9k.png Times that by quite a bit. And server no go. Each process takes up about 1.1% of ram. And when we have 50 of them on the go. It gets insane. Not all of them are coming from the same blog, they are pretty widespread. In the Apache process page of WHM, they are usually ALL set to the status of "C", which means closing. But they can sit there until they crash the server, and they still hold the memory. Just google "wp-cron.php load" and you will find plenty of people with similar issues. In anycase, we have think it is down to users adding a tonne of dead "pinglists" to their wordpress installation. Which in turn wordpress loops through them endlessly. Problem number 1. Does anyone have any other suggestions about what would cause the Wordpress file wp-cron.php to loop endlessly. I still think it is down to pings, because all of the people we have contacted about their account load going sky high, have had massive ping lists. Problem number 2. Even if it is down to excessive pinglists in wordpress. We cannot be babying every single account on the server waiting for it to start spawning the wp-cron processes. It often happens overnight, and I start getting SMS alerts at 2am about the load. I have CSF installed, which apparently would have ended the processes if they ran over XXX time. But I have been told that it won't catch the processes because they end up in this state of "closing" (They show up as "C" on the Apache page of WHM). Apparently CSF will only kill processes that are "running" which C does not count. I have seen various other scripts such as : http://dltj.org/article/die-apache-die/ . I took a look at the stat of /proc. But I was boggled at which delimited part was the time running. And if there was any way I could connect it back to an actual Apache process, so that I could see what file was running (So only close connections connected to wp-cron.php, with a state of "C"). Overall I know Problem 2 glosses over the real reason. But I do put the whole thing to excessive pinglists in Wordpress. But I just cannot sit there and babysit every single installation 24/7. So I need a way to save the server when I am not available. Any help would be much appreciated.

    Read the article

  • I can connect to Samba server but cannot access shares.

    - by jlego
    I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

    Read the article

  • Scan a Windows PC for Viruses from a Ubuntu Live CD

    - by Trevor Bekolay
    Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

    Read the article

  • The How-To Geek Holiday Gift Guide (Geeky Stuff We Like)

    - by The Geek
    Welcome to the very first How-To Geek Holiday Gift Guide, where we’ve put together a list of our absolute favorites to help you weed through all of the junk out there to pick the perfect gift for anybody. Though really, it’s just a list of the geeky stuff we want. We’ve got a whole range of items on the list, from cheaper gifts that most anybody can afford, to the really expensive stuff that we’re pretty sure nobody is giving us. Stocking Stuffers Here’s a couple of ideas for items that won’t break the bank. LED Keychain Micro-Light   Magcraft 1/8-Inch Rare Earth Cube Magnets Best little LED keychain light around. If they don’t need the penknife of the above item this is the perfect gift. I give them out by the handfuls and nobody ever says anything but good things about them. I’ve got ones that are years old and still running on the same battery.  Price: $8   Geeks cannot resist magnets. Jason bought this pack for his fridge because he was sick of big clunky magnets… these things are amazing. One tiny magnet, smaller than an Altoid mint, can practically hold a clipboard right to the fridge. Amazing. I spend more time playing with them on the counter than I do actually hanging stuff.  Price: $10 Lots of Geeky Mugs   Astronomy Powerful Green Laser Pointer There’s loads of fun, geeky mugs you can find on Amazon or anywhere else—and they are great choices for the geek who loves their coffee. You can get the Caffeine mug pictured here, or go with an Atari one, Canon Lens, or the Aperture mug based on Portal. Your choice. Price: $7   No, it’s not a light saber, but it’s nearly bright enough to be one—you can illuminate low flying clouds at night or just blind some aliens on your day off. All that for an extremely low price. Loads of fun. Price: $15       Geeky TV Shows and Books Sometimes you just want to relax and enjoy a some TV or a good book. Here’s a few choices. The IT Crowd Fourth Season   Doctor Who, Complete Fifth Series Ridiculous, funny show about nerds in the IT department, loved by almost all the geeks here at HTG. Justin even makes this required watching for new hires in his office so they’ll get his jokes. You can pre-order the fourth season, or pick up seasons one, two, or three for even cheaper. Price: $13   It doesn’t get any more nerdy than Eric’s pick, the fifth all-new series of Doctor Who, where the Daleks are hatching a new master plan from the heart of war-torn London. There’s also alien vampires, humanoid reptiles, and a lot more. Price: $52 Battlestar Galactica Complete Series   MAKE: Electronics: Learning Through Discovery Watch the epic fight to save the human race by finding the fabled planet Earth while being hunted by the robotic Cylons. You can grab the entire series on DVD or Blu-ray, or get the seasons individually. This isn’t your average sci-fi TV show. Price: $150 for Blu-ray.   Want to learn the fundamentals of electronics in a fun, hands-on way? The Make:Electronics book helps you build the circuits and learn how it all works—as if you had any more time between all that registry hacking and loading software on your new PC. Price: $21       Geeky Gadgets for the Gadget-Loving Geek Here’s a few of the items on our gadget list, though lets be honest: geeks are going to love almost any gadget, especially shiny new ones. Klipsch Image S4i Premium Noise-Isolating Headset with 3-Button Apple Control   GP2X Caanoo MAME/Console Emulator If you’re a real music geek looking for some serious quality in the headset for your iPhone or iPod, this is the pair that Alex recommends. They aren’t terribly cheap, but you can get the less expensive S3 earphones instead if you prefer. Price: $50-100   Eric says: “As an owner of an older version, I can say the GP2X is one of my favorite gadgets ever. Touted a “Retro Emulation Juggernaut,” GP2X runs Linux and may be the only open source software console available. Sounds too good to be true, but isn’t.” Price: $150 Roku XDS Streaming Player 1080p   Western Digital WD TV Live Plus HD Media Player If you do a lot of streaming over Netflix, Hulu Plus, Amazon’s Video on Demand, Pandora, and others, the Roku box is a great choice to get your content on your TV without paying a lot of money.  It’s also got Wireless-N built in, and it supports full 1080P HD. Price: $99   If you’ve got a home media collection sitting on a hard drive or a network server, the Western Digital box is probably the cheapest way to get that content on your TV, and it even supports Netflix streaming too. It’ll play loads of formats in full HD quality. Price: $99 Fujitsu ScanSnap S300 Color Mobile Scanner   Doxie, the amazing scanner for documents Trevor said: “This wonderful little scanner has become absolutely essential to me. My desk used to just be a gigantic pile of papers that I didn’t need at the moment, but couldn’t throw away ‘just in case.’ Now, every few weeks, I’ll run that paper pile through this and then happily shred the originals!” Price: $300   If you don’t scan quite as often and are looking for a budget scanner you can throw into your bag, or toss into a drawer in your desk, the Doxie scanner is a great alternative that I’ve been using for a while. It’s half the price, and while it’s not as full-featured as the Fujitsu, it might be a better choice for the very casual user. Price: $150       (Expensive) Gadgets Almost Anybody Will Love If you’re not sure that one of the more geeky presents is gonna work, here’s some gadgets that just about anybody is going to love, especially if they don’t have one already. Of course, some of these are a bit on the expensive side—but it’s a wish list, right? Amazon Kindle       The Kindle weighs less than a paperback book, the screen is amazing and easy on the eyes, and get ready for the kicker: the battery lasts at least a month. We aren’t kidding, either—it really lasts that long. If you don’t feel like spending money for books, you can use it to read PDFs, and if you want to get really geeky, you can hack it for custom screensavers. Price: $139 iPod Touch or iPad       You can’t go wrong with either of these presents—the iPod Touch can do almost everything the iPhone can do, including games, apps, and music, and it has the same Retina display as the iPhone, HD video recording, and a front-facing camera so you can use FaceTime. Price: $229+, depending on model. The iPad is a great tablet for playing games, browsing the web, or just using on your coffee table for guests. It’s well worth buying one—but if you’re buying for yourself, keep in mind that the iPad 2 is probably coming out in 3 months. Price: $500+ MacBook Air  The MacBook Air comes in 11” or 13” versions, and it’s an amazing little machine. It’s lightweight, the battery lasts nearly forever, and it resumes from sleep almost instantly. Since it uses an SSD drive instead of a hard drive, you’re barely going to notice any speed problems for general use. So if you’ve got a lot of money to blow, this is a killer gift. Price: $999 and up. Stuck with No Idea for a Present? Gift Cards! Yeah, you’re not going to win any “thoughtful present” awards with these, but you might just give somebody what they really want—the new Angry Birds HD for their iPad, Cut the Rope, or anything else they want. ITunes Gift Card   Amazon.com Gift Card Somebody in your circle getting a new iPod, iPhone, or iPad? You can get them an iTunes gift card, which they can use to buy music, games or apps. Yep, this way you can gift them a copy of Angry Birds if they don’t already have it. Or even Cut the Rope.   No clue what to get somebody on your list? Amazon gift cards let them buy pretty much anything they want, from organic weirdberries to big screen TVs. Yeah, it’s not as thoughtful as getting them a nice present, but look at the bright side: maybe they’ll get you an Amazon gift card and it’ll balance out. That’s the highlights from our lists—got anything else to add? Share your geeky gift ideas in the comments. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

    Read the article

  • ODI 12c - Parallel Table Load

    - by David Allan
    In this post we will look at the ODI 12c capability of parallel table load from the aspect of the mapping developer and the knowledge module developer - two quite different viewpoints. This is about parallel table loading which isn't to be confused with loading multiple targets per se. It supports the ability for ODI mappings to be executed concurrently especially if there is an overlap of the datastores that they access, so any temporary resources created may be uniquely constructed by ODI. Temporary objects can be anything basically - common examples are staging tables, indexes, views, directories - anything in the ETL to help the data integration flow do its job. In ODI 11g users found a few workarounds (such as changing the technology prefixes - see here) to build unique temporary names but it was more of a challenge in error cases. ODI 12c mappings by default operate exactly as they did in ODI 11g with respect to these temporary names (this is also true for upgraded interfaces and scenarios) but can be configured to support the uniqueness capabilities. We will look at this feature from two aspects; that of a mapping developer and that of a developer (of procedures or KMs). 1. Firstly as a Mapping Developer..... 1.1 Control when uniqueness is enabled A new property is available to set unique name generation on/off. When unique names have been enabled for a mapping, all temporary names used by the collection and integration objects will be generated using unique names. This property is presented as a check-box in the Property Inspector for a deployment specification. 1.2 Handle cleanup after successful execution Provided that all temporary objects that are created have a corresponding drop statement then all of the temporary objects should be removed during a successful execution. This should be the case with the KMs developed by Oracle. 1.3 Handle cleanup after unsuccessful execution If an execution failed in ODI 11g then temporary tables would have been left around and cleaned up in the subsequent run. In ODI 12c, KM tasks can now have a cleanup-type task which is executed even after a failure in the main tasks. These cleanup tasks will be executed even on failure if the property 'Remove Temporary Objects on Error' is set. If the agent was to crash and not be able to execute this task, then there is an ODI tool (OdiRemoveTemporaryObjects here) you can invoke to cleanup the tables - it supports date ranges and the like. That's all there is to it from the aspect of the mapping developer it's much, much simpler and straightforward. You can now execute the same mapping concurrently or execute many mappings using the same resource concurrently without worrying about conflict.  2. Secondly as a Procedure or KM Developer..... In the ODI Operator the executed code shows the actual name that is generated - you can also see the runtime code prior to execution (introduced in 11.1.1.7), for example below in the code type I selected 'Pre-executed Code' this lets you see the code about to be processed and you can also see the executed code (which is the default view). References to the collection (C$) and integration (I$) names will be automatically made unique by using the odiRef APIs - these objects will have unique names whenever concurrency has been enabled for a particular mapping deployment specification. It's also possible to use name uniqueness functions in procedures and your own KMs. 2.1 New uniqueness tags  You can also make your own temporary objects have unique names by explicitly including either %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG in the name passed to calls to the odiRef APIs. Such names would always include the unique tag regardless of the concurrency setting. To illustrate, let's look at the getObjectName() method. At <% expansion time, this API will append %UNIQUE_STEP_TAG to the object name for collection and integration tables. The name parameter passed to this API may contain  %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. This API always generates to the <? version of getObjectName() At execution time this API will replace the unique tag macros with a string that is unique to the current execution scope. The returned name will conform to the name-length restriction for the target technology, and its pattern for the unique tag. Any necessary truncation will be performed against the initial name for the object and any other fixed text that may have been specified. Examples are:- <?=odiRef.getObjectName("L", "%COL_PRFEMP%UNIQUE_STEP_TAG", "D")?> SCOTT.C$_EABH7QI1BR1EQI3M76PG9SIMBQQ <?=odiRef.getObjectName("L", "EMP%UNIQUE_STEP_TAG_AE", "D")?> SCOTT.EMPAO96Q2JEKO0FTHQP77TMSAIOSR_ Methods which have this kind of support include getFrom, getTableName, getTable, getObjectShortName and getTemporaryIndex. There are APIs for retrieving this tag info also, the getInfo API has been extended with the following properties (the UNIQUE* properties can also be used in ODI procedures); UNIQUE_STEP_TAG - Returns the unique value for the current step scope, e.g. 5rvmd8hOIy7OU2o1FhsF61 Note that this will be a different value for each loop-iteration when the step is in a loop. UNIQUE_SESSION_TAG - Returns the unique value for the current session scope, e.g. 6N38vXLrgjwUwT5MseHHY9 IS_CONCURRENT - Returns info about the current mapping, will return 0 or 1 (only in % phase) GUID_SRC_SET - Returns the UUID for the current source set/execution unit (only in % phase) The getPop API has been extended with the IS_CONCURRENT property which returns info about an mapping, will return 0 or 1.  2.2 Additional APIs Some new APIs are provided including getFormattedName which will allow KM developers to construct a name from fixed-text or ODI symbols that can be optionally truncate to a max length and use a specific encoding for the unique tag. It has syntax getFormattedName(String pName[, String pTechnologyCode]) This API is available at both the % and the ? phase.  The format string can contain the ODI prefixes that are available for getObjectName(), e.g. %INT_PRF, %COL_PRF, %ERR_PRF, %IDX_PRF alongwith %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. The latter tags will be expanded into a unique string according to the specified technology. Calls to this API within the same execution context are guaranteed to return the same unique name provided that the same parameters are passed to the call. e.g. <%=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")%> <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")?> C$_MY_TAB7wDiBe80vBog1auacS1xB_AE <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG.log", "FILE")?> C2_MY_TAB7wDiBe80vBog1auacS1xB.log 2.3 Name length generation  As part of name generation, the length of the generated name will be compared with the maximum length for the target technology and truncation may need to be applied. When a unique tag is included in the generated string it is important that uniqueness is not compromised by truncation of the unique tag. When a unique tag is NOT part of the generated name, the name will be truncated by removing characters from the end - this is the existing 11g algorithm. When a unique tag is included, the algorithm will first truncate the <postfix> and if necessary  the <prefix>. It is recommended that users will ensure there is sufficient uniqueness in the <prefix> section to ensure uniqueness of the final resultant name. SUMMARY To summarize, ODI 12c make it much simpler to utilize mappings in concurrent cases and provides APIs for helping developing any procedures or custom knowledge modules in such a way they can be used in highly concurrent, parallel scenarios. 

    Read the article

  • CodePlex Daily Summary for Sunday, September 30, 2012

    CodePlex Daily Summary for Sunday, September 30, 2012Popular ReleasesCAPTCHA Solver: Initial Release: This is the initial Release :) Still very much a WIP.MCEBuddy 2.x: MCEBuddy 2.2.17: Reccomended update to 2.2.16 Changelog for 2.2.17 (32bit and 64bit) 1. Fixed bugs around thread synchronization with new remote model (fixes cause the app to crash or hang) 2. Updated UPnP code base, faster and more reliable now 3. Now you can get audio/video properties for multiple files on main page. Selected multiple files and right click, all selected files properties will be shown. 4. Fix a bug, not able to enter a conversion task name in the GUIAggravation: Version 1.0: This version 1.0 release is pretty stable. You need the Silverlight 4 runtime, developer tools, and Experssion Blend 4 installed.Readable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryPDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????,????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.D3 Loot Tracker: 1.4: Session name is displayed in the UI. Changes data directory for clickonce deployment so that sessions files are persisted between versions. Added a delete button in the sessions list window. Allow opening of the sessions local folder from the session list widow. Display the session name in the main window Ability to select which diablo process to hook up to when pressing new () function BUT only if multi-process support is selected in the generals settings tab menu. Session picker...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.C.B.R. : Comic Book Reader: CBR 0.7: Synthesis since 0.6 : ePUB : Complete refactoring Add a new dedicated feed viewer for opds stream PDF conversion : improved with image merge Make all backstage panel scrollable Integrate the new AvalonDock 2 library. Support multi-document. Library explorer and Table of content are now toolboxes Designer for dynamic books is now mvvm and much better New BrowserForControl Customized xps viewer to suppress toolbars and bind it to cbr commands Add quick start manual and button ...menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.Snake!: Snake 1.0: Version 1 StablePaging SharePoint ListItems using listitems position: Paginglistitems V1.0: This is a console application which has two methods both on CSOM and SOM to display the listitems in a paged manner.SharePoint Move Discussion Threads: SharePoint Move Discussion Threads ver 0.1: ver 0.1NTCPMSG: V1.1.1.0: increase the performance. Support .net framework 4.0.BlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????New Projects2D Sprite Editor: This is a 2d sprite editor. Import your sprite sheet, trace your animations frame and export the coordinates points in a simple txt file, ready to import.caifenweb1: test project.CatchThatException: This is a small logging library We created at developerpath.com to help us log exceptions. It write it to a text file and you can easilay open that txt.FsxWs - WebServices for Microsoft FSX: WebServices for MS Flight Simulator. Get flights data as JSON, KML. !! Still in SetUp phase - be patient !!GetTPB: Some training in downloading and parsing web pages, with multithreading too.JSON-RPC Client Generator (for XBMC): The goal of this project is to provide a .Net client for the XBMC JSONRPC API. The main part is not XBMC dependent and may be used for any JSON-RPC client.matlab-silhouette-pose-wtf: Whatevermfp: this is random codeMVC Grid: MVC Grid ExampleMyWebSocketTry: sssssssssssssssssssssssssssssssssssssssNetduino Console: Netduino Console is an interface with built in messaging layers that allows you as a developer to dynamically create plugins following a provided interface to iSharePoint ASP.NET Verifier: Project will allow to verify SharePoint 2010 components using ASP.NET web applicationSharepoint Custom Upload: This is a SharePoint solution that allows an administrator to customize the upload page individually for each document library in a site.. It allows you to makeWinWeb Browser Deluxe: WinWeb Browser Deluxe es un navegador web de código abierto basado en Internet Explorer hecho en Visual Basic .NET. Descargalo ya!writethatoutput: This is the official release page for WriteThatOutPut from developerpath.com

    Read the article

  • .NET 4.5 is an in-place replacement for .NET 4.0

    - by Rick Strahl
    With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • CodePlex Daily Summary for Tuesday, February 23, 2010

    CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

    Read the article

  • Heroku Problem During Database Pull of Rails App: Mysql::Error MySQL server has gone away

    - by Rich Apodaca
    Attempting to pull my database from Heroku gives an error partway through the process (below). Using: Snow Leopard; heroku-1.8.2; taps-0.2.26; rails-2.3.5; mysql-5.1.42. Database is smallish, as you can see from the error message. Heroku tech support says it's a problem on my system, but offers nothing in the way of how to solve it. I've seen the issue reported before - for example here. How can I get around this problem? The error: $ heroku db:pull Auto-detected local database: mysql://[...]@localhost/[...]?encoding=utf8 Receiving schema Receiving data 17 tables, 9,609 records [...] /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `query': Mysql::Error MySQL server has gone away (Sequel::DatabaseError) from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:166:in `_execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:101:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:125:in `execute' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:296:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset.rb:276:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:365:in `execute_dui' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `each' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:144:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/connection_pool.rb:108:in `hold' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/database.rb:461:in `synchronize' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/adapters/mysql.rb:138:in `transaction' from /Library/Ruby/Gems/1.8/gems/sequel-3.0.0/lib/sequel/dataset/convenience.rb:126:in `import' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:211:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `loop' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:203:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `each' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:196:in `cmd_receive_data' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:175:in `cmd_receive' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:17:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:119:in `taps_client' from /Library/Ruby/Gems/1.8/gems/taps-0.2.26/lib/taps/client_session.rb:21:in `start' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:115:in `taps_client' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/commands/db.rb:16:in `pull' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `send' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:45:in `run_internal' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/../lib/heroku/command.rb:17:in `run' from /Library/Ruby/Gems/1.8/gems/heroku-1.8.2/bin/heroku:14 from /usr/bin/heroku:19:in `load' from /usr/bin/heroku:19

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >