Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 168/1167 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • IIS 7 and ASP.NET State Service Configuration

    - by Shawn
    We have 2 web servers load balanced and we wanted to get away from sticky sessions for obvious reasons. Our attempted approach is to use the ASP.NET State service on one of the boxes to store the session state for both. I realize that it's best to have a server dedicated to storing sessions but we don't have the resources for that. I've followed these instructions to no avail. The session still isn't being shared between the two servers. I'm not receiving any errors. I have the same machine key for both servers, and I've set the application ID to a unique value that matches between the two servers. Any suggestions on how I can troubleshoot this issue? Update: I turned on the session state service on my local machine and pointed both servers to the ip address on my local machine and it worked as expected. The session was shared between both servers. This leads me to believe that the problem might be that I'm not using a standalone server as my state service. Perhaps the problem is because I am using the ip address 127.0.0.1 on one server and then using a different ip address on the other server. Unfortunately when I try to use the network ip address as opposed to localhost the connection doesn't seem to work from the host server. Any insight on whether my suspicions are correct would be appreciated.

    Read the article

  • Issues with configuration of Apache and mod_auth_sspi

    - by TekiusFanatikus
    I've been able to get this working using XAMP with Apache 2.0.55 and XAMP Apache 2.2.14 without any problems. However, when I attempt to configure our intranet server (Apache 2.0.59), I don't get the same results. The results are that the following variables contain the information desired: $_SERVER["REMOTE_USER"] AND $_SERVER["PHP_AUTH_USER"]. In this case, they are blank. I'm expecting "domain/user_name". Conf file stuff: <Directory "/xxx/xampp/htdocs/"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks Includes ExecCGI Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride All AllowOverride None # # Controls who can get stuff from this server. # #Order allow,deny #Allow from all Order allow,deny Allow from all #NT Domain Login AuthName "Intranet" AuthType SSPI SSPIAuth On SSPIAuthoritative On SSPIDomain "xxxx" SSPIOfferBasic Off SSPIPerRequestAuth On SSPIOmitDomain Off # keep domain name in userid string SSPIUsernameCase lower Require valid-user </Directory> I would like to note that I've modified the paths to reflect the intranet environment. I'm using the following module: http://sourceforge.net/projects/mod-auth-sspi/ Once the module is installed and the conf file is modified, the intranet environment's server scope isn't populated with the expected variables. Edit #1 <Directory "/path_here"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks Includes ExecCGI Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride All AllowOverride None # # Controls who can get stuff from this server. # #Order allow,deny #Allow from all Order allow,deny Allow from all #NT Domain Login AuthName "Intranet" AuthType SSPI SSPIAuth On SSPIAuthoritative On SSPIDomain "domain_here" SSPIOfferBasic On SSPIPerRequestAuth On SSPIOmitDomain Off # keep domain name in userid string SSPIUsernameCase lower Require valid-user </Directory>

    Read the article

  • Airpot Express configuration

    - by Christina
    We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

    Read the article

  • rsnapshot intervals in configuration file...

    - by Patrick
    A simple question about rsnapshot. In order to perform daily backups I'm going to add lines to cron in my Ubuntu. Then, why do I have also these lines in the rsnapshot.conf ? ######################################### # BACKUP INTERVALS # # Must be unique and in ascending order # # i.e. hourly, daily, weekly, etc. # ######################################### interval hourly 6 interval daily 7 interval weekly 4 #interval monthly 3 If I use cron, should I disable them ? thanks ps. I've just realized that in the crontab I still have "hourly" and "daily". Should I then uncomment only the one I use in the crontab ? And what's the point to specify hourly if it is already specified in cron ? I'm a bit confused. # crontab -e 0 */4 * * * /usr/local/bin/rsnapshot hourly 30 23 * * * /usr/local/bin/rsnapshot daily

    Read the article

  • why this routing configuration does not work?

    - by avs099
    I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

    Read the article

  • Best Configuration For Youtube HD 720p

    - by Eray Alakese
    Hello, I'm recording a screencast with CamStudio . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose.

    Read the article

  • Best Configuration For Youtube HD 720p

    - by Eray Alakese
    Hello, I'm recording a screencast with CamStudio (http://camstudio.org/) . My computer's screen resolution is 1280*800 , so video's resolution is 1280*800, too. I'm using Microsoft Video 1 codec when recording. I was record 9 minutes video and this video's size is 214 MB . I will upload this video to Youtube. I'm coding a web site at the video, because of this, video must be quality (720p) . I want to reduce file's size, before upload . I'm using Total Video Converter (http://www.effectmatrix.com/total-video-converter/) . But when i convert to FLV , video's size increase to 250MB :) I don't know, how can i configure this setting and which file type should i choose. (screenshot here : http://i.imgur.com/Se0EP.jpg )

    Read the article

  • Superscope DHCP leases and configuration set up

    - by Vdub
    Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

    Read the article

  • IBM BladeCenter S: Disk Configuration

    - by gravyface
    Have just the one storage bay right now (SAS 15K 600GB x 6) and have configured one storage pool in RAID 10 with 4 disks (and two global spares). For each blade, I've created a volume and mapped accordingly: Blade #1 400 GB Blade #2 200 GB Blade #3 100 GB Blade #4 100 GB When I boot up Blade 1 and enter into the UEFI Setup (F1) followed by the Adapters and UEFI Drivers LSI Logic Fusion MPT SAS Driver Utility, I see 4 disks: two are the on-board 73GB drives, the other two are 200GB each and assume I'm being presented with two logical disks from the volume I created and mapped to this blade. I was a bit surprised by this: I figured I would've been presented with one logical drive per volume, not two. I'm assuming I can just configure whatever RAID level I wish that supports two disks, but not really sure what the benefits/trade-offs here. Should I go with RAID 10 on top of RAID 10? RAID 0? Software RAID 0/1/10? Does it even matter? If this is "normal" to see two disks, then I'm going to likely just do some benchmarking and see if it makes a difference changing the RAID levels (my guess is no); if this is not normal, well, please let me know. :)

    Read the article

  • HP E200i Controlller RAID Configuration fon Win2008 Ent, Sql Server, IIS Apps etc need opinion

    - by mn
    Hello, Actually I run RAID 5 (4 x SAS drives) with Win 2008 Ent(1x host) Win 2008 End(3x guest) Sql Server 2005 Std (on guest) 3 x asp.net applications (on guest) I bought 3 x drives to create additional array (on same controller E200i, I am waiting now for confirmation is it possible to have 3 raids in same controller) I am planning to have 2 x RAID5 (if it is possible) first RAID 5 with all vhd files, systems etc second RAID 5 all data files and transaction logs I am looking for opinion how to optimize data layer (seven drives, one controller).

    Read the article

  • Need help on phpMyAdmin Configuration

    - by Tareq
    I use Windows XP on my Server and Client Machines On the Server, I install Wamp5 1.7.3 This software installs phpMyAdmin 2.11.0 I want to use this phpMyAdmin from my Client Machines. What should I do? If you need any more information please inform me. I need this solution very urgently. Thanks in advance.

    Read the article

  • Software RAID 1 Configuration

    - by Corve
    I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

    Read the article

  • GRUB2 Boot Configuration

    - by MA1
    Recently i installed GRUB2, everything is working fine. When my system is started my monitor is showing something like the following "Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename." Press "Esc" key to enter the menu. Boot windows... and when i press the Esc key it then shows the GRUB2 menu showing list of operating systems installed on my system How the remove "Minimal BASH-Like line editing ...." text. I only need this line Press "Esc" key to enter the menu. Boot windows... Note: Both my WindowsXP and Fedora12 are working fine and loading with no problem.

    Read the article

  • postfix test and configuration problem

    - by Woho87
    Hi Guys! I installed postfix using sudo yum install postfix postfix-mysql. I'm newbie to mail systems, but I have one AMAZON EC2 instance with a public DNS. I used the public DNS in most cases, when I configured the file main.cf. The public DNS I have is from amazon and it is a long string(ec2-123-34-234-677.....amazon.com). // I configured this on main.cf. I replaced example.com with ec2-123-.......amazon.com myhostname = mail.example.com mydomain = example.com myorigin = $mydomain mydestination = example.com, $transport_maps local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname home_mailbox = Maildir/ How do I test postfix? I just want it to send emails for my web application. I tried to test it with >telnet localhost 25 after I typed in SSH >sudo postfix start. but I recieve the message that telnet command can not be found. I also use the Amazon linux distribution if you want to know. I use it because it is free. What have I done wrong? Are there anymore configurations required pls help!

    Read the article

  • Dead drive in LVM/XFS configuration

    - by Freddie Witherden
    I had three drives in LVM: a 2 TB drive and two 1 TB drives (added later). One of the 1 TB drives -- I believe the third one -- has died. Spanning all three drives was an XFS partition. Reading: http://www.novell.com/coolsolutions/appnote/19386.html I see that one way of handling this is to replace the dead drive and copy the metadata over. However, I am currently not in possession of a 1 TB drive and can not readily acquire one. Given this, what are my options? There was nothing important on the drives (if there was I would have them in RAID 1) but I would not mind attempting a recovery. Is there a simple way of forcing LVM to go with just two drives and NUL out anything else? (So that fsck can do its thing.)

    Read the article

  • More advanced 'Apple Automator' like software?

    - by OrangeBox
    What I'm looking for is a program similar to Automator or A Better Finder Rename but more extensive / advanced. In my situation we have two files with the same name, one is a MOV the other an XML. We want to use some of the metadata within the XML to rename both files. Then we want to re-arrange the contents of the XML file so that it is compatible with another piece of software we use (I think this process is called mapping?) Essentially some software that takes a bunch of variable from existing file and performs file actions to them. I imagine this would be an easy task using apple-script, but I'm wondering if there is a OSX application similar to Automator that can do the above? Questions are: Is there software that can do the above? Could Automator achieve this? What is the technical name of this kind of process? If no such software exists, what would be the best kind of script to use? eg. Make an Apple Script, python script etc.

    Read the article

  • Apache configuration FollowSymlinks- Apply to php scripts?

    - by Josh
    I have Options set to none for my webroot directory. I also have a symmlink /var/coderoot - /var/webroot/coderoot In the php script I can do include("/var/coderoot/file"); and it works fine. Regardless of the option (yes I save and restart apache.) Does follow symlinks only apply to symlinks used in a certain way? Is there a performance loss using the include with a symmlink?

    Read the article

  • Configuration of Server root email - Change Address and Name on outgoing email

    - by JTWOOD
    As a newbie Postfix user, I've gotten so far and now I am stuck with a SMALL problem. I would like to configure my local network servers to send alerts and like using the following: 1) From address: [email protected] 2) From name: Hostname I can get #1 to work fine using smtp_generic_maps The problem is that on my email client, the name is listed as "root" - as in the header shows the following: Date: Sun, 29 Jul 2012 13:21:01 -0400 (EDT) From: [email protected] (root) To: undisclosed-recipients:; I'd like to change it to "From: [email protected] (Zeus)" I imagine that this can be done in the headers_check, but so far I haven't gotten anything to work and before I waste a ton of time trying to get this to work, I'd like to make sure I am on the right track. My aliasing and genericmaps are set up correctly (As far as I can see and know - the results are correct!). I just want to change that last bit in the From field to reflect the hostname. I would also like to add something in the subject of the outgoing messages for easy filtering - something like Subject: [Zeus.domain] - "Original Subject" Any suggestions are much appreciated. Thanks!

    Read the article

  • Automating MySQL configuration with kickstart

    - by Nimmy Lebby
    I've been testing deployment for a website with some virtual servers. I have most of my deployment steps done via kickstart file (package installation and user creation). However, for MySQL I have to: Run mysql_secure_installation (sets up root password, deletes anonymous users, disallows root login remotely, removes test databases) ./ Then, create the website's databases and the database user. I'm not sure if this is possible in kickstart---especially the prompts in mysql_secure_installation. Perhaps someone has some suggestions or examples?

    Read the article

  • Cisco configuration for public library internet

    - by AlternateZ
    I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

    Read the article

  • Export policy configuration from eTrust ITM 8.1

    - by grub
    Hi everyone. Currently we are using the Enterprise AV Solution eTrust ITM 8.1. The licenses are running out in october and we are going to replace eTrust with another AV solution. The eTrust Server is running on Windows Server 2003 SP2 with an MS SQL 2000 Standard Edition. The problem is that we've got many different policy - sets which we have to redefine in the new AV solution. Is there any way with eTrust ITM 8.1 to export the different policies as csv, pdf ... whatever? I really dont want to do that manually (that would mean one print screen after the other ;-) ) Thank you very much. grub

    Read the article

  • Ubuntu IP Configuration - multiple subnets & interfaces

    - by HaydnWVN
    Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

    Read the article

  • recommendation for configuration for a multi-core guestOS

    - by reidLinden
    Hi there, I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my guestOS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my GuestOS now? 1 processor/4 cores? 2 processors/2Cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today. Suggestions?

    Read the article

  • Postfix configuration (relay access)

    - by jome
    I have just installed POSTFIX on a Debian box, I pointed the relay host config setting to an exchange server which will deliver the mail to external users. So what I am trying to do is telnet to the debian box and send an email to [email protected] which will then be past to the exchange server for delivery. The problem is I get the following: rcpt to:[email protected] 554 relay access denied I have seen a section in the config "mydestination" but i want the exchange server to decide which domains it will deliver for and not the POSTFIX server.

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >