Search Results

Search found 6295 results on 252 pages for 'git push'.

Page 169/252 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• Disable mouse hotkeys in Chrome

  - by John Ruiz

  Does anyone know how I can get Chrome to stop using my mouse buttons as hotkeys for a Logitech MX518 gaming mouse? I have the mouse driver and software suite (SetPoint) installed. Unfortunately, SetPoint does not provide per-application settings, so that route is not an option. No matter what I do in SetPoint, Chrome captures my side mouse buttons and uses them as a forward/back hotkey. I want to turn this off because I use those buttons for my push-to-talk in Mumble/Ventrilo. Any idea how I can do this? edit: my set-point does not have a way to create per-application settings.

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• Backing up locally modified and new source files

  - by eran

  I'm wondering how other programmers are backing up changes that are not under source control yet, be it new files or modified ones. I'm mostly referring to medium size jobs - hardly worth the effort of making a private branch, but taking more than a day to complete. This is not a vendor-specific question - I'd like to see if various products have different solutions to the problem. I'd appreciate answers referring to SVN and distributed SCCs, though. I'm mostly wondering about that latters (Mercurial, GIT etc.) - it's great that you have your own local repo, but do you back it up on a regular basis along with your source files? Note - I'm not asking about a general backup strategy. For that, we have IT. I'm seeking the best way to keep locally modified stuff backed-up before they are checked back into the main repo.

  Read the article

• Source control Branching needs

  - by Mükremin

  Hello, we are creating hospital information system software. The project will be different hospital to hospital and contain different use cases. But lots of parts will be the same. So we will use branching mechanism of the source control. If we find a bug in one hospital, how can we know the other branches have the same bug or not. Resim The numbers in the picture which we attached show the each hospital software. Do you have a solution about this problem ? Which source control(SVN,Git,Hg) we will be suitable about this problem ? Thank you.!

  Read the article

• What are the advantages of a distributed version control for a team that is effectively never distri

  - by Luke CK

  When working remotely, our team only has access to our source code by remote desktop into our office PCs so we never really work in offline mode. Does a distributed version control system like Mercurial or Git still give us advantages over our current centralized Subversion set up? If so, what are they? Are there any drawbacks or pitfalls? I've read in numerous places that shifting to distributed version control requires a change in thinking. Can someone explain what needs to change in this regard?

  Read the article

• Plastic SCM vs. Mercurial? Need Source Control for Visual Studio 2005 on Windows 7

  - by Pete Alvin

  1) Has anyone used Plastic SCM? Is it reliable? 2) How does it compare with Mercurial? (It seems like this is a good candidate for DVCS on Windows. I tried Git and really didn't like it.) 3) I really like TortoiseSVN. I like a central model because of the piece of mind that if it's in the respository it's "safe" and tracked. Here is the question: Is the excitement over distributed version control (DVCS) worth the hype? My environment: Windows 7 Windows development (Dev. Studio 2005, SQL Server 2003); integration would be nice Two developers sharing same code push code to production servers almost daily

  Read the article

• Fastest way to deploy rails apps with Passenger

  - by yuval

  I am working on a Dreamhost server with Rails 2.3.5. Every time I make changes to a site, I have to ssh into the site, remove all the files, upload a zip file containing all the new files for the site, unzip that file, migrate the database, and go. Something tells me there's a faster way to deploy rails apps. I am using mac Time Machine to keep track of different versions of my applications. I know git tracks files, but I don't really know how to work with it to deploy my applications, since passenger takes care of all the magic for me. What would be a faster way to deploy my applications (and avoid the downtime associated with my method when I delete all files on the server)? Thanks!

  Read the article

• Wrong file encoding after Dist::Zilla

  - by xenoterracide

  How can I get mojibake to pass? this might be a bug in the contributors plugin. The character does not render correctly in perldoc, but does in my vim and in the extracted git log. # Failed test 'Mojibake test for blib/lib/Pod/Spell.pm' # at /home/xenoterracide/perl5/perlbrew/perls/perl-5.18.1/lib/site_perl/5.18.1/Test/Mojibake.pm line 168. # Non-UTF-8 unexpected in blib/lib/Pod/Spell.pm, line 431 (POD) here's a snippet from the source which should probably be looked at directly due to copy-paste maybe not catching an encoding issue. =item * Olivier Mengué <[email protected]> =back A little more vim exploration shows that :set filencoding is being changed to latin1 editing the file in vim seems to fix this, but since the file is being generated, how can I get it generated with the correct encoding?

  Read the article

• Creating different margins on the first page of a word template

  - by Paul

  I have a letterhead template and I need the first page left margin to be larger than subsequent pages. I've seen the option of placing a text box or image box in the header to push the text but this ends up throwing off the tabs and bullet list indentation markers. I thought of setting up the first page using two columns and pushing the text to start on the second column but I can't seem to find a way to get the text to switch back to 1 column on the second page when it is created from text overflowing. Does anyone know how something like this is possible? Thanks in advance, Paul

  Read the article

• Mercurial changeset hook problem when auto updating. Server permissions maybe??

  - by Gary Willoughby

  I am using Mercurial SCM over a LAN using a normal shared folder instead of http and i'm having a problem getting the auto update hook to run. I have entered this hook as detailed here: http://mercurial.selenic.com/wiki/FAQ#FAQ.2BAC8-CommonProblems.Any_way_to_.27hg_push.27_and_have_an_automatic_.27hg_update.27_on_the_remote_server.3F This installs the hook, but when i push something to the remote repo i get an error: added 1 changesets with 1 changes to 1 files running hook changegroup: hg update >&2 warning: changegroup hook exited with status -1 There is a stackoverflow question similar to this here: http://stackoverflow.com/questions/2885246/mercurial-auto-update-problem but it offers no solutions other than it may be a permissions error somewhere. Has anyone else had this problem and can anyone else shed any more light on this or give me a heads up on where to start fixing this? Thanks.

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

• Problems with Black Box KVM

  - by MrWizard54

  I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

  Read the article

• No display but video card fans spins

  - by Marc

  Since I moved my computer there's no display when I plug my screen in the video card but works fine in the mother board. I tried reseting the cmos, but I still have the same problem. The fans are spining and there's a light from the card. I tried the DVI ports and the HDMI Here's my build. I have it for 2 months and everything was working fine. Do you think it's the video card? Asus p8z68-v pro gen3 Intel i7 2600k 120 GB OCZ Agility 3 16 GB RAM Blue Corsair DDR3 Asus GTX 570 H80 Corsair liquid cooling XFX PRO750W 80Plus bronze power supply EDIT That's why And I can't push more cause the card is on this Thank you everyone! I fixed it by pushing the mobo from the other side of the case and now it fits.

  Read the article

• Automatically reboot Windows8 if no internet activity [migrated]

  - by Patrick

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• Corrupted network from ipad

  - by lisa

  All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

  Read the article

• is Boost Library's weighted median broken?

  - by user624188

  I confess that I am no expert in C++. I am looking for a fast way to compute weighted median, which Boost seemed to have. But it seems I am not able to make it work. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/median.hpp> #include <boost/accumulators/statistics/weighted_median.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::median > > acc1; accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << median(acc1) << std::endl; std::cout << "Weighted Median: " << median(acc2) << std::endl; return 0; } produces the following output, which is clearly wrong. Median: 0.3 Weighted Median: 0.3 Am I doing something wrong? Any help will be greatly appreciated. * however, the weighted sum works correctly * @glowcoder: The weighted sum works perfectly fine like this. #include <iostream> #include <boost/accumulators/accumulators.hpp> #include <boost/accumulators/statistics/stats.hpp> #include <boost/accumulators/statistics/sum.hpp> #include <boost/accumulators/statistics/weighted_sum.hpp> using namespace boost::accumulators; int main() { // Define an accumulator set accumulator_set<double, stats<tag::sum > > acc1; accumulator_set<double, stats<tag::sum >, float> acc2; // accumulator_set<double, stats<tag::median >, float> acc2; // push in some data ... acc1(0.1); acc1(0.2); acc1(0.3); acc1(0.4); acc1(0.5); acc1(0.6); acc2(0.1, weight=0.); acc2(0.2, weight=0.); acc2(0.3, weight=0.); acc2(0.4, weight=1.); acc2(0.5, weight=1.); acc2(0.6, weight=1.); // Display the results ... std::cout << " Median: " << sum(acc1) << std::endl; std::cout << "Weighted Median: " << sum(acc2) << std::endl; return 0; } and the result is Sum: 2.1 Weighted Sum: 1.5

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• cluster of services and restarting on package upgrade

  - by Marcin Cylke

  I'm using puppet to manage a bunch of servers. Those servers run a simple service - exposed to the world via load balancer. That service's instances are independent in that they can run on their own, are are deployed on multiple servers to increase responsiveness. Now, when I push a new package to repo and puppet catches up with it appearing there it just updates this package on all services. This results in a short downtime of entire service. Is there a way of configuring puppet to do restart the services sequentially? Or using any other kind of strategy?

  Read the article

• Renaming files: Visual Studio vs Version control

  - by Benjol

  The problem with renaming files is that if you want to take advantage of Visual Studio refactoring, you really need to do it from inside Visual Studio. But most (not all*) version control system also want to be the ones doing the renaming. One solution is to use integrated source control, but this is not always available, and in some cases is pretty clunky. I'd personally be more comfortable using source control separately, outside of Visual Studio, but I'm not sure how to manage this question of file renames. So, for those of you that use Visual Studio, which source control do you use? Do you use a VS integration (which one?) and otherwise, how do you resolve this renaming problem? (* git is smart enough to work it out for itself)

  Read the article

• Where to observe application deployed by Jenkins?

  - by James

  Question from a first-time Jenkins user. So I hope you wouldn't mind if the question is too silly. I have installed jenkins on a Ubuntu machine, and is accessible at localhost:8080. I have successfully configured it to work with Maven2 and Git as well. Next, I created a job/project (A Java/Spring application), and got it to build without error on Jenkins as well. Now my question is, where do I see this application running? :) Best Regards James

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• Open source report framework

  - by Tiax

  I'm looking for a open source report framework for statistics. A more detailed explanation is: We have a number of tests running on different servers collecting data (for example, login time) every 5min. What we need is a framework that collects this data (or exposes web services for us to push the data into the framework) and presents it in form of graphs and so on. Does anyone know of a framework that's easy to use out of the box but has the power to grow? If you know what I mean. Thanks in advance!

  Read the article

• Building FFmpeg for Android

  - by varevarao

  I've spent almost a week on this now, trying to get FFmpeg "Angel" to build for Android. I've tried build scripts from all over the internet to no avail. I got closest was using this. A sthe author himself says the script doesn't work for newer versions of FFmpeg due to this bug, which has been dismissed on that ticket saying "I found a Makefile that does it." This was dis-heartening, being the only post on all of the cast Google world that was anywhere close to my problem. So, question time: Is there a way to get around the above bug? I'm trying to use the newest ffmpeg API, and "Love" is just giving me "undefined reference" errors while trying to use av_encode_video2(), and av_free_frame(). The code I was working on the lines of is at the ffmpeg git repo, under /doc/examples/decoding_encoding.c (the function starting on line 338)

  Read the article

• Reduce Heroku Compiled Slug Size

  - by etrepat

  I've just updated rails to v2.3.6 on my app under a bamboo-ree-1.8.7 stack and the compiled slug size has grown up to 40.5Mb! Previous to that last git push, the slug size was about 20Mb and was using rails v2.3.5. Is it because my slug has both of rails versions installed? Probably I'm missing something but I haven't added any special code/files into my app as to increase the slug size by ~20Mb. Can you point me on how can I reduce the slug size? Any help will be greatly appreciated. Thank you very much in advance.

  Read the article

• How to install remote software NOT on a domain?

  - by Nicros

  I have a situation where some software (that I wrote) is going to be deployed on 60 laptops for an event. The laptops are all running windows 7, but there is no domain controller, and they will all be connected to a 192.168.x.x network using wifi. Is there any convenient way to push the software (consisting of an msi file) can be pushed out to all the laptops and installed? I looked at WMIC, but I think that requires machines be joined to a domain, as does Group Policy. The other alternative is Powershell, but I have literally 4 hours to do this and will have no time to figure out the right script. It's not the end of the world if it has to be done manually (I can find volunteers) but it would be nicer if it could be automated somehow.

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >