Search Results

Search found 10169 results on 407 pages for 'port'.

Page 169/407 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• Unable to connect remotely to Vsftpd server set up on CentOS VirtualBox

  - by ryekayo

  I have set up a Vsftp server using the following instructions provided Here and even went as far as following the commentary at the bottom. But I am unable to connect remotely. When I attempt to use FileZilla or my Ubuntu terminal, I always get: ryan@ryan-Galago-UltraPro:~$ ftp 10.0.x.xx ftp: connect: Connection timed out ftp> I have checked and re-checked iptables conf file and made sure that Port 21 is being Accepted and it is. I have looked this up on the web and decided to try nmap to port scan it and this is what I get for a result: ryan@ryan-Galago-UltraPro:~$ nmap -PN 10.0.xx.xx Starting Nmap 6.40 ( http://nmap.org ) at 2014-08-19 15:01 EDT Nmap scan report for 10.0.xx.xx Host is up. All 1000 scanned ports on 10.0.xx.xx are filtered Nmap done: 1 IP address (1 host up) scanned in 201.38 seconds Is there anything else that I should do or check for? UPDATE: I have tried to ping from the virtual machine to my IP address on Ubuntu and have been successfully able to. I cannot ping to my virtual machine from Ubuntu. I have narrowed this down to possibly being a firewall related issue on Ubuntu's side, but why would I be unable to connect from FileZilla?

  Read the article

• need to stop mysql server on my mac os x

  - by al0ne evenings

  I just installed xampp on my mac os x. When I tried start mysql it display a message that mysql is already running on this computer. In order to start mysql stop first mysql. I tried following ways to stop it but neither of them works. mysqladmin version sudo /usr/local/mysql/mysql.server stop //mysql.server command not found mysqladmin -u root -p password shutdown //restarts the server but not shutdown when i use which mysql command it shows this path /usr/local/bin/mysql and when I issue ps aux | grep mysqld command I get following output zafarsaleem 85209 0.0 0.3 2699804 13204 ?? S 7:51AM 0:00.88 /Applications/MAMP/Library/bin/mysqld --basedir=/Applications/MAMP/Library --datadir=/Applications/MAMP/db/mysql --plugin-dir=/Applications/MAMP/Library/lib/plugin --lower-case-table-names=0 --log-error=/Applications/MAMP/logs/mysql_error_log.err --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --socket=/Applications/MAMP/tmp/mysql/mysql.sock --port=8889 zafarsaleem 85093 0.0 0.0 2435488 924 ?? S 7:51AM 0:00.03 /bin/sh /Applications/MAMP/Library/bin/mysqld_safe --port=8889 --socket=/Applications/MAMP/tmp/mysql/mysql.sock --lower_case_table_names=0 --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --log-error=/Applications/MAMP/logs/mysql_error_log zafarsaleem 86693 0.0 0.0 2425480 180 s004 R+ 8:30AM 0:00.00 grep mysqld zafarsaleem 86507 0.0 0.3 2678756 11364 ?? S 8:07AM 0:00.63 /usr/local/Cellar/mysql/5.5.20/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.5.20 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.5.20/lib/plugin --max-allowed-packet=32M --log-error=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.err --pid-file=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.pid zafarsaleem 86447 0.0 0.0 2435488 920 ?? S 8:07AM 0:00.02 /bin/sh /usr/local/bin/mysqld_safe --max_allowed_packet=32M Please help. How can I resolve this issue.

  Read the article

• iptables configuration to work with apache2 mod_proxy

  - by swdalex

  Hello! I have iptables config like this: iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --sport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A OUTPUT -p tcp --sport 443 -j ACCEPT Also, I have apache virtual host: <VirtualHost *:80> ServerName wiki.myite.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8901/ ProxyPassReverse / http://localhost:8901/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> My primary domain www.mysite.com is working well with this configuration (I don't use proxy redirect on it). But my virtual host wiki.mysite.com is not responding. Please, help me to setup iptables config to allow wiki.mysite.com working too. I think, I need to setup iptables FORWARDING options, but I don't know how. update: I have 1 server with 1 IP. On server I have apache2.2 on 80 port. Also I have tomcat6 on 8901 port. In apache I setup to forwarding domain wiki.mysite.com to tomcat (mysite.com:8901). I want to secure my server by disabling all ports, except 80, 22 and 443.

  Read the article

• different nmap results

  - by aasasas

  Hello I have a scan on my server form outside and from inside, why results are different? [root@xxx ~]# nmap -sV -p 0-65535 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 07:59 MSK Nmap scan report for localhost (127.0.0.1) Host is up (0.000015s latency). rDNS record for 127.0.0.1: localhost.localdomain Not shown: 65534 closed ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 80/tcp open http Apache httpd 2.2.3 ((CentOS)) Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 7.99 seconds AND sh-3.2# nmap -sV -p 0-65535 xxx.com Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 00:01 EST Warning: Unable to open interface vmnet1 -- skipping it. Warning: Unable to open interface vmnet8 -- skipping it. Stats: 0:07:49 elapsed; 0 hosts completed (1 up), 1 undergoing SYN Stealth Scan SYN Stealth Scan Timing: About 36.92% done; ETC: 00:22 (0:13:21 remaining) Stats: 0:22:05 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 75.00% done; ETC: 00:23 (0:00:02 remaining) Nmap scan report for xxx.com (x.x.x.x) Host is up (0.22s latency). Not shown: 65528 closed ports PORT STATE SERVICE VERSION 21/tcp open tcpwrapped 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 25/tcp open tcpwrapped 80/tcp open http Apache httpd 2.2.3 ((CentOS)) 110/tcp open tcpwrapped 143/tcp open tcpwrapped 443/tcp open tcpwrapped 8080/tcp open http-proxy?

  Read the article

• Configure Domino to use SMTP routing and hMailServer

  - by Sébastien Lachance

  I have been trying for a couple of days to set up a Domino 8.5 server. Basically, I want everything to be run inside a local network. Right now I can send email to other user in the Domino directory without any mail address. I am pretty new to all this stuff, so maybe the answer will be really obvious. What I need to do is be able to send a mail from somewhere else to a domino user that will be redirected to his account. On the Domino server, I also have hMailServer installed on port 25. I configured Domino to use port 26. I followed those step to get where I am now. -I have set the Fully qualified Internet host name to "preview.notes". -Smtp Listener task changed to Enabled to turn on the Listener so that the server can receive messages routed via SMTP routing -Setting up SMTP routing within the local Internet domain (http://www.h2l.com/help/help85%5Fadmin.nsf/f4b82fbb75e942a6852566ac0037f284/7f9738a49efc4f58852574d500097b01?OpenDocument) -I modified the person to use the [email protected] address. -I'm using the hMailServer (which have the local "preview.local" domain name) to send mail to [email protected]. When sending mail I got an error telling that the DNS is not set up correctly. Is using the Domino Smtp server instead of hMailServer will solve the problem? I can Telnet the Domino Smtp Server.

  Read the article

• Can't connect to local MySQL server through socket

  - by Martin

  I was trying to tune the performance of a running mysql-server by running this command: mysqld_safe --key_buffer_size=64M --table_cache=256 --sort_buffer_size=4M --read_buffer_size=1M & After this i'm unable to connect mysql from the server where mysql is running. I get this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) However, luckily i can still connect to mysql remotely. So all my webservers still have access to mysql and are running without any problems. Because of this though i don't want to try to restart the mysql server since that will probably mess everything up. Now i know that mysqld_safe is starting the mysql-server, and since the mysql server was already running i guess it's some kind of problem with two mysql servers running and listening to the same port. Is there some way to solve this problem without restarting the initial mysql server? UPDATE: This is what ps xa | grep "mysql" says: 11672 ? S 0:00 /bin/sh /usr/bin/mysqld_safe 11780 ? Sl 175:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/run/mysqld/mysqld.sock --port=3306 11781 ? S 0:00 logger -t mysqld -p daemon.error 12432 pts/0 R+ 0:00 grep mysql

  Read the article

• Gittornado with Nginx fails to push and pull

  - by Josh Buell

  I'm making a simple website to host git repositories, much like github. I'm using Gittornado to handle git Smart HTTP requests, and it works perfectly locally; I can clone, push, pull, etc... But when I put it behind Nginx, git commands stop working, giving no errors except: "fatal: The remote end hung up unexpectedly" I know that it's Nginx that's causing the trouble because if I open the port that tornado is running on and try my git commands through that (i.e. "git pull \http://mysite.com:8000/myrepository master" instead of "git pull \http://mysite.com/myrepository master" [backslashes added because Server Fault says I have too many links]) everything works as expected. The Nginx access and error logs don't seem to say anything interesting, so I'm reasonably sure that it has something to do with the way Nginx is compressing or chunking the requests/responses, causing git to think there's been an unexpected hangup, but I'm not sure what to do to fix it, since this is my first time with Nginx. My Nginx configuration file is basically a clone of the on found here; I've tried commenting out various likely-seeming options to see if they were causing the problem, but none of them fixed it so I assume there's some default behavior I need to suppress, I'm just not sure which. Any thoughts on how to fix this? Since it works not through Nginx, I'm considering just redirecting git requests to the tornado port itself, but this feels like a hack rather than a clean solution...

  Read the article

• Long Gigabit Ethernet Run

  - by Timothy R. Butler

  I am trying to get an Gig-E network between two buildings that are approximately 260 ft. away. While some TRENDnet switches failed to be able to connect to each other over Cat 6 at that distance, two Netgear 5-port Gig-E switches do so just fine. However, it still fails after I put in place APC PNET1GB ethernet surge protectors at each end before the line connects to the respective switches. So I find myself wondering if I simply need to find a better surge protector that doesn't degrade the signal as much (if so, what kind would you recommend?) or if I should give up on copper and use fiber between the buildings. If I opt to go the latter route, I could really use some pointers. It looks like LC connectors are the most common, but I keep running into some others as well. A media converter on each end seems like the simplest solution, but perhaps a Gig-E switch with an SFP port would make more sense? Given a very limited budget, sticking with my existing copper seems best, but if it is bound to be a headache, a 100 meter fiber cable is something I think I can swing cost wise.

  Read the article

• multiple streaming servers behind a Bastion Host

  - by Bond

  I am using open source streaming server Red5 on multiple servers. Which are running behind a bastion host. the world knows these sites as http://site1.mydomain.com http://site2.mydomain.com http://site3.mydomain.com http://site4.mydomain.com To reach the front end server is using Apache Reverse Proxy. I am also having video streaming on each of these websites using rtmp. To be able to reach the streaming server I embed a javascript in HTML pages as follows Code: <embed ..... var="rtmp://site1.my_domain.com" > the problem is the website are many site1.mydomain.com site2.mydomain.com site3.mydomain.com site4.mydomain.com each on a separate physical server. Each of these four have their own Red5 installations the front end to each of these four is a common Bastion Host. If I run rtmp on each of the subdomains at a different port how will I make sure a request such as rtmp://site1.mydomain.com rtmp://site2.mydomain.com goes to their respective servers. from the front end server. What do I need to handle in this case ? IPTABLES came to mind instantly but from the client browser on internet when some one requests rtmp://site1.mydomain.com how will I make sure this rtmp request is mapped to a port different than 1935 as there are three other streaming servers which are also to respond to their respective requests ?

  Read the article

• Apche ssl is not working

  - by user1703321

  I have configure virtual host on 80 and 443 port(Centos 5.6 and apache 2.2.3), following is the sample, i have wrote the configuration in same order Listen 80 Listen 443 NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> ServerAdmin [email protected] ServerName www.abc.be ServerAlias abc.be . . </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName www.abc.fr ServerAlias abc.fr . . </VirtualHost> then i have define 443 <VirtualHost *:443> ServerAdmin [email protected] ServerName www.abc.be ServerAlias abc.be . . SSLEngine on SSLCertificateFile /etc/ssl/private/abc.be.crt SSLCertificateKeyFile /etc/ssl/private/abc.be.key SSLCertificateChainFile /etc/ssl/private/gd_bundle_be.crt </VirtualHost> <VirtualHost *:443> ServerAdmin [email protected] ServerName www.abc.fr ServerAlias abc.fr . . SSLEngine on SSLCertificateFile /etc/ssl/private/abc.fr.crt SSLCertificateKeyFile /etc/ssl/private/abc.fr.key SSLCertificateChainFile /etc/ssl/private/gd_bundle_fr.crt </VirtualHost> First ssl certificate for abc.be is working fine, but 2nd domian abc.fr still load first ssl. following the output of apachictl -s VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:443 is a NameVirtualHost default server www.abc.be (/etc/httpd/conf/httpd.conf:1071) port 443 namevhost www.abc.fr (/etc/httpd/conf/httpd.conf:1071) Thanks

  Read the article

• OS X 10.6 Apply ipfw rules at startup

  - by Michael Irey

  I have a couple of firewall rules I would to like to apply at startup. I have followed the instructions from http://images.apple.com/support/security/guides/docs/SnowLeopard_Security_Config_v10.6.pdf On page 192. However, the rules do not get applied at startup. I am running 10.6.8 NON Server Edition. I can however run: (Which applies the rules correctly) sudo ipfw /etc/ipfw.conf Which results in: 00100 fwd 127.0.0.1,8080 tcp from any to any dst-port 80 in 00200 fwd 127.0.0.1,8443 tcp from any to any dst-port 443 in 65535 allow ip from any to any Here is my /etc/ipfw.conf # To get real 80 and 443 while loading vagrant vbox add fwd localhost,8080 tcp from any to any 80 in add fwd localhost,8443 tcp from any to any 443 in Here is my /Library/LaunchDaemons/ipfw.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>ipfw</string> <key>Program</key> <string>/sbin/ipfw</string> <key>ProgramArguments</key> <array> <string>/sbin/ipfw</string> <string>/etc/ipfw.conf</string> </array> <key>RunAtLoad</key> <true /> </dict> </plist> The permissions of all the files seem to be appropriate: -rw-rw-r-- 1 root wheel 151 Oct 11 14:11 /etc/ipfw.conf -rw-rw-r-- 1 root wheel 438 Oct 11 14:09 /Library/LaunchDaemons/ipfw.plist Any thoughts or ideas on what could be wrong would be very helpful!

  Read the article

• Esx servers in a DMZ

  - by James

  I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Migrating to CF9: trouble getting JRun working with SSL

  - by DaveBurns

  I have a client on MX7 who wants to migrate to CF9. I have a dev environment for them on my WinXP machine where I've configured MX7 to run with JRun's built-in web server. I've had that working for a long time with both regular and SSL connections. I installed CF9 yesterday side-by-side with the existing MX7 install to start testing. The install was smooth and detected MX7, adjusted CF9's port numbers for no conflict, etc. Testing started well: MX7 over regular and SSL still worked and CF9 worked over regular HTTP. But I can't get CF9 to work with SSL. I installed a new certificate with keytool, FireFox (v3.6) complained about it being unsigned, I added it to the exception list, and now I get this: Secure Connection Failed An error occurred during a connection to localhost:9101. Peer reports it experienced an internal error. (Error code: ssl_error_internal_error_alert) I've been Googling that in all variations but can't find much help to get past this. I don't see any info in any log files either. FWIW, here's my SSL config from SERVER-INF/jrun.xml: <service class="jrun.servlet.http.SSLService" name="SSLService"> <attribute name="enabled">true</attribute>` <attribute name="interface">*</attribute> <attribute name="port">9101</attribute> <attribute name="keyStore">{jrun.rootdir}/lib/mykey</attribute> <attribute name="keyStorePassword">*deleted*</attribute> <attribute name="trustStore">{jrun.rootdir}/lib/trustStore</attribute> <attribute name="socketFactoryName">jrun.servlet.http.JRunSSLServerSocketFactory</attribute> <attribute name="deactivated">false</attribute> <attribute name="bindAddress">*</attribute> <attribute name="clientAuth">false</attribute> </service> Anyone here know of any issues re setting up SSL and CF9? Anyone had success with it? Dave

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

  Read the article

• Should I enabled 802.3x hardware flow control?

  - by Stu Thompson

  What is the conventional wisdom regarding 802.3x flow control? I'm setting up a network at a new colo and am wondering if I should be enabling it or not. My oh-cool-a-bright-and-shiny-new-toy self wants to enable it, but this seems like one of those decisions that could blow up in my face later on. My network: An HP ProCurve 2510G-24 switch A pair of Debian 5 HP DL380 G5's with built-in NC373i 2-port NIC LACP'd as one link. 9000 jumbo frames enabled. (Application) A pair of hand-built Ubuntu server with 4-port Intel Pro/1000 LACP'd as one link. 9000 jumbo frames enabled. (NAS) A few other servers with with single 1Gbps ports, but one with 100Mbps. Most of this kit is 802.3x. I've been enabling it as I go along, and am about to test the network. But as my 'go live' day nears, I am worried about the 802.3x decision as I've never explicitly used it before. Also, I've read some 10-year old articles out there on the Intertubes that warn against using flow control. Should I be enabling 802.3x hardware flow control?

  Read the article

• Bridged network on OS X only gets UDP broadcast traffic

  - by a paid nerd

  I've created a bridged network Mac OS X 10.8.5 using ifconfig and TUNTAP for OS X to bridge my wireless connection, en0, with a virtual interface, tap0, which I can use for guest VMs: $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 28:cf:xx:xx:xx:xx inet6 xxxx::xxxx:xxxx:xxxx:xxxx%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.64 netmask 0xffffff00 broadcast 192.168.100.1 media: autoselect status: active bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) However, if I tcpdump -i tap0, I only see broadcast traffic. Shouldn't I see a mirror of everything on en0? (192.168.100.33, the host doing the broadcasting, is another unrelate, noisy server on my LAN.) (I asked a similar question here and will probably close it.)

  Read the article

• Problem linking two Cisco routers with a static route

  - by Chris Kaczor

  I'm trying to link two Cisco routers with a static route and I haven't been able to get it working as expected. Here is the basic setup: Router 1 - WRV210 - 192.168.1.1 - connected to cable modem Router 2 - RV120W - 192.168.2.1 I already have several machines on Router 1 that are working and I want to setup Router 2 with a few other machines on the different subnet. Here is what I've configured: Connected the WAN port on Router 2 to a LAN port on Router 1 Configured Router 1 to give 192.168.1.2 to Router 2 via DHCP Configured Router 1 with a static route (192.168.2.0 mask 255.255.255.0) to 192.168.1.2 using the LAN & Wireless interface Disabled the firewall on Router 2 (since it is covered by Router 1) Configured Router 2 to "Router" mode instead of "NAT" mode Configured Router 2 with a static route (192.168.1.0 mask 255.255.255.0) to 192.168.1.1 using the WAN interface From the research I've done I think that should be enough but things aren't working exactly as expected: Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) A machine on Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) A machine on Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) Router 1 and a machine on Router 1 can ping 192.168.1.2 (Router 2 itself) I'm confused as to why Router 1 cannot talk to the 192.168.2.0/255.255.255.0 subnet. Any help would be greatly appreciated.

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

  - by sohum

  So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

  Read the article

• Enabling AHCI in BIOS for SSD

  - by Robert

  I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

  Read the article

• SQL Server Instance login issue

  - by reallyJim

  I've just brought up a new installation of SQL Server 2008. I installed the default instance as well as one named instance. I'm having a problem connecting to the named instance from anywhere besides the server itself with any user besides 'sa'. I am running in mixed mode. I have a login/user that has a known username. Using that user/login, I can properly connect when directly on the server. When I attempt to login from anywhere else, I recieve a "Login failed for user ''", with Error 18456. In the log file in the server, I see a reason that doesn't seem to help: "Reason: Could not find a login matching the name provided.". However, that user/login DOES exist, as I can use it locally. There are no further details about the error. Where can I start to find something to help me with this? I've tried deleting and recreating the user, as well as just creating a new one from scratch--same result, locally fine, remotely an error. EDIT: Partially Resolved. I'm now passed the base issue--the clients were trying to connect via the default instance. I don't know why. So, once proper ports were opened in the firewall, and a static port assigned to the named instance, I can now connect--BUT ONLY if I specify the connection as Server,Port. SQLBrowser is apparently not helping/working in this case. I've verified it IS running, and done a stop/restart after my config changes, but no difference yet.

  Read the article

• ServerName not working in Apache2 and Ubuntu

  - by CreativeNotice

  Setting up a dev LAMP server and I wish to allow dynamic subdomains, aka ted.servername.com, bob.servername.com. Here's my sites-active file <VirtualHost *:80> # Admin Email, Server Name, Aliases ServerAdmin [email protected] ServerName happyslice.net ServerAlias *.happyslice.net # Index file and Document Root DirectoryIndex index.html DocumentRoot /home/sysadmin/public_html/happyslice.net/public # Custom Log file locations LogLevel warn ErrorLog /home/sysadmin/public_html/happyslice.net/log/error.log CustomLog /home/sysadmin/public_html/happyslice.net/log/access.log combined And here's the output from sudo apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/happyslice.net:5) Syntax OK The server hostname is srv.happyslice.net. As you can see from apache2ctl when I use happyslice.net I get the default virtual host, when I use a subdomain, I get the happyslice.net host. So the later is working how I want, but the main url does not. I've tried all kinds of variations here, but it appears that ServerName just isn't being tied to the correct location. Thoughts? I'm stumped. FYI, I'm running Apache2.1 and Ubuntu 10.04 LTS

  Read the article

• Fast Ethernet module for Cisco 2620

  - by Kenny Rasschaert

  I have a Cisco 2620 Router. It comes with one fast ethernet port built in (circled in red), and one old AUI ethernet module is installed (circled in blue). I figure I can put a transceiver on the AUI interface to get a second RJ45 connector. What I'd really like to have is a second fast ethernet connector. The ideal candidate to achieve this would be the NM-1FE-TX module. Cisco claims on their website that this module is not suitable for the Cisco 2620 and Cisco 2620XM. It says so in "Table 2 Physical Limitation of Serial Modules per Chassis". Indeed, this module was designed for the 3600 series of routers. I've seen claims on the internet, however, of people having this module on a 2620XM, and it being fully functional. This claim gains some credibility because of the fact that in Cisco's own Packet Tracer software, you can install this module on the 2620XM router. I'm looking for a definitive answer. Will this module work on a Cisco 2620? Is there perhaps another way to get a second fast ethernet port on this device?

  Read the article

• setting up a proxy to mirror an SSH SOCKS connection

  - by aresnick

  I have two remote machines, remote1 and remote2. remote2 is only running sshd, and I can't run anything else on it. remote1 is a full-fledged server to which I have complete access. I can run a SOCKS proxy on remote2 via ssh -f -N -D *:8080 me@remote2 which lets me expose a SOCKS proxy on port 8080 on remote1. I'd like to authenticate this so that the proxy isn't sitting open. How can I do this? It seems like I should be able to use delegate, but I can't even seem to get its HTTP proxy functionality working. When I run delegated -r -P8081 SERVER=http PERMIT="*:*:*" REMITTABLE="*" I can't even get it to work on port 8081. Anyway, I was hoping someone could point me in the right direction to let me authenticate access to the SOCKS proxy connection? That is, I want to be able to point my browser's proxy at remote1 and browse the internet through the SSH SOCKS proxy/tunnel to remote2. squid doesn't support a SOCKS parent =( Thanks!

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >