Search Results

Search found 4824 results on 193 pages for 'sandeep k ram'.

Page 169/193 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• Gateway laptop module bay light repeating 12 flashes - what error is that?

  - by Simurr

  I have a Gateway M465-E laptop currently running fine with a T2300E Core Duo installed. I wanted to upgrade it to a Core 2 Duo. My brother has the same model laptop and that took a Core 2 Duo (T7200) just fine. Picked up a T7200 on ebay and installed it. Normally when booting all the indicator lights flash once and the fan spins up before the machine actually starts to POST. With the T7200 installed all the lights flash and the fan spins up, but the module bay activity light flashes 12 times repeatedly. I'm assuming this is an error code, but can find no information about it. There are no beep codes. I've removed the ram, HD, Bay module and no change. Switched back to the T2300E and everything works fine. Anyone know what that error code is? The motherboard was actually manufactured by Foxconn if that helps. Update 1 Returned the CPU as defective. I tested it in 3 M465-E's and all of them did exactly the same thing. I still have no idea what the error code is. I'd still like to know for future reference. Perhaps I should try removing the CPU from one of them and see what happens.

  Read the article

• New PC: win7 install issues with 2x3TB in RAID1

  - by goober

  Background / Components Not sure what I've done wrong. Built one PC before successfully in a similar way but this one seems to be struggling. I have the following components: ASUS P8Z68-V/Pro Gen 3 (updated to latest firmware) 16GB (2x8GB) RAM corsair hx850 power supply 2x3TB drives on the intel z68 controller 1x128GB SSD on the Marvel controller sapphire 7950 The problem I set up my 3 TB disks in RAID1 controller appears to recognize them fine during boot as one 2.7TB raid1 volume windows setup sees two disks, both 746 GB, but will only let me install to one and appears to work fine. windows appears to install fine after installer reboots, I receive "windows failed to start" error referencing code 0xc000000e and "\Windows\system32\winload.exe every time I do an install, a new additional "win7" entry is added to the boot menu; all lead to this error. What I've tried: updated the BIOS to the latest firmware attempted to repair the install tried clearing / removing raid / re-raiding drives tried formatting the drives during install attempted to clear the menu Of entries (can't figure out how to do that) No matter how many times I destroy the raid array, format the disks, etc. the boot entries keep piling up. Any idea where I'm going wrong?

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Windows won't boot after moving house. How do I solve this?

  - by James

  Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

  Read the article

• Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

  - by Josh Stodola

  So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

  Read the article

• What is best configuration settings for Wordpress and MySQL on Win2008 + IIS7 stack?

  - by holiveira

  I currently have four blogs that uses Wordpress running on a shared hosting company. This blogs have a considerable amount of visits and I'm constantly receiving warnings from the hosting company saying that I'm consuming too much server CPU. Considering the fact that I have a dedicated server in another company with plenty of idle resources (it has a quad core Xeon 2.5GHz and 8GB of Ram and run on Win2008) I'm planning to move the blogs to this server in order to have some more freedom. I'm currently using this server to host some web applications using ASP.Net and SQL Express. I've installed a blog to test and it worked fine, but some issues appeared and raised some questions in my mind: How to properly set the permissions in the folders used by wordpress plugins, I mean, what permissions should I set for the IIS_User in some folders so that the plugins works correctly? What's the best caching plugin to use considering this is a Window Server? In the previous hosting company I used the WPSuperCache, but it was a Linux Stack. Or should I ignore the caching plugins and use the Dynamic Caching Feature of IIS7? How can I optmize the MySQL server running in this server (specially the settings regarding memory and caching) How can I protect the admin folders against hacker attacks? I know some people will advice me not to run Wordpress in a Windows stack, but that's my only choice. I don't even know were to start managing and LAMP stack, don't have the time to do so nor the money to rent another server.

  Read the article

• computer fails to boot during/after POST for five or six boots, then works

  - by N13

  For the last few days, my computer has had issues booting. I've seen two different behaviors: The screen displays the graphics card information, then begins to list the RAM, hard drives, etc. At different points in this process (after the graphics info), the computer shuts off. After five or six attempts, it then boots normally. In roughly the same time frame, the computer freezes, and fails to boot. I think it boots successfully on the next attempt. I've also noticed that in some instances, the computer freezes on shutdown. It gets right to the point where it should shut off, but doesn't. I recently combined the best parts of two different machines into this one. I'm booting to GRUB, with Ubuntu 12.04, Linux Mint 11 and Windows Vista (unfortunately) as my OS options. It has an Enermax Modu82+ 525W power supply, and I've used an online calculator to determine that my load shouldn't exceed 400W. I even unplugged a hard drive, but that didn't help. I found the latest BIOS, patched it and checked the settings, but that didn't fix it. I'm fairly certain this issue didn't exist at first, but might have started when the power at my new apartment dropped for a second. The machine is plugged into a surge protector strip, but it's old and I've heard they lose effectiveness with age. Is a power dip as damaging as a spike? If something were damaged, why would it boot successfully after five or six attempts? It's almost like the BIOS or PSU need to be primed. The trouble with debugging is that there seems to be a "grace period" after shutdown where the issue doesn't present itself again. What should I try next?

  Read the article

• Without an internet connection my computer loads programs slowly. With an internet connection they load quickly

  - by Peter pete

  Gday. I've a laptop, with 8gb of RAM and a Samsung 830 SSD with about 2/5th of free space out of its 256gb. Win7 64b. Laptop is a Toshiba T130. In the other day I noticed that it took a long time to load a program, for example the python interpreter at the time the computer didn't have access to the home network. In both cases the computer boots quickly. About 40 seconds. Without internet opening the python interpreter, or notepad2.exe, or any program individually takes around 10 seconds. With internet connection (through WiFi) opening the same programs takes about 2 seconds. In both cases, it becomes SSD-instant-quick to open a program from a cold boot. I don't have any network mapped drives. I've tried with AV off (Avast antivirus) and same effect. I've installed all MS updates. I've googled and googled and have found nothing of help. I've run the Samsung SSD magician to "optimise" ssd and that didn't help. What could I do to determine & fix this issue?

  Read the article

• Computer not finding hard drives on boot -sometimes-

  - by todd.pund

  Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

  Read the article

• ASP.Net Session Timing Out Rapidly

  - by Zac

  We have an ASP.Net 3.5 website running on Windows Server 2008 with IIS7. The session timeout period for this site is configured to be 20 minutes - however, it is currently lasting for between 40 and 50 seconds. After researching the problem we investigated several configuration values which could be involved in the timeout period but none of them are set to less than 20 minutes. The areas we look are as follows: web.config system.web/sessionState element (20 minutes). web.config system.web/authentication/forms element (not present, defaults to 30 minutes). Sites/{website}/ASP/Session Properties/Time-out (20 minutes). Application Pools/{appPool}/Advanced Settings/Process Model/Idle Time-out (20 minutes). We've also noted that the CPU is staying around 0% and that RAM usage is flat-lining around 1.07 GB (of 8 GB available) - so there is no performance-based reason for IIS to be recycling the Application Pool as far as we can tell. Are there any settings we've overlooked which could cause the session timeouts to be expiring so quickly? EDIT A couple of additional points: This is not occurring in development, only on the server. The session is not sliding (i.e. if we refresh the page a few times it still times out approximately 40 - 50 seconds after the session was created.

  Read the article

• What hardware would I need (approx) to run ESXi server?

  - by mr.b

  Hi, I am considering to purchase off-the-shelf commodity hardware in order to build server that will host virtual machines using ESXi server. Intended purpose for this server is NOT mission critical tasks. It will have to run perhaps 20-50 Windows XP/Vista/7 virtual machines (in total, but closer to 20 figure). Each guest would have to have 1-2 GB of ram, and probably two-three times more disk space than guest OS needs with clean install and all updates applied (that would be around 6-8 GB for XP, and i believe closer to 10-15 for win7). Those guests will act as a test ground for a new product that is network management software, thus guests will idle most of their time once initially loaded, but if I give them some task to complete, they should be able to perform reasonably well. Now, from what I have learned... CPU is usually not much of an issue (6 cores would do it), memory should not be lacking, but doesn't have to be sum of all guests, because of overcommitment... That leads me to IO, which is, as it seems, the bottleneck. Since I have very little experience with ESXi (and ESX, too) server, I'd like to ask: How much memory could I save by overcommitment, and how does it affect performance? Is 6-core cpu enough to run above described system? Would it be possible to run entire server off two (or even one) SSD drives (to host system virtual disks, with few additional HDDs (2-3) in RAID 0 to be used as secondary storage? I read somewhere that ESXi allows having something like "master image", essentially virtual machine that is "deployed" many times, so that disk space can be saved by having only differences stored by specific guests, instead of copying around whole virtual disks. Is this true, and how can this help me? Are there any other things I need to take into consideration when building this off-the-shelf solution? I should probably mention here that I'm fully aware of issues like SPOF regarding power supply, raid 0, etc, but since it's only a testing ground and not a production system, it's not so important for me. Thanks, B.

  Read the article

• problem transferring Win 7 operating system hard drive to be used as external hard drive

  - by itserich

  Win 7 Asus MA479 8GB Ram hard drives are 500GB The operating system was a Caviar Green, and I tried to exchange it for a Caviar Blue. The Caviar Blue took the install correctly, but the Green, the prior operating system hard drive, will not allow itself to be used as an external hard drive. I use TrueCrypt and tried to format the Green and it freezes each time at the very end of the encyrption of the partition. I took the Blue out of the system and tried to encrypt it, and same problem. I think there must be something on the hard drive that shows it was a system drive and it causes a conflict. I have tried writing over the system hard drive to fully erase everything but that does not work, it still freezes. The drives will work in a different pc, i.e. other pc where it never was the system drive. The external hard drive is connected esata through Thermaltake. I have used TrueCrypt on various pc's for years including this Win7 with no problem. Thank you.

  Read the article

• (Win7) Gets stuck with ~1% CPU. Especially with multithreading

  - by meow

  Windows 7 32 bit, up to date, Intel i7 860. (For some reason the company runs 32bit Windows everywhere.) I tried to update all motherboard drivers etc. as far as possible. I have a performance issue with a machine which appears in connection with multithreading (or so I think). As an example (and where I most often see it, but it appears on other programs as well): ProteoWizard is a file conversion tool for mass spectrometry files. I can add a list of files and it will attempt to process up to 8 files in parallel (quadcore x 2 threads/core). If I choose 1 to 6 files, I start the process and it goes straight through. If I have =7 files in the queue, conversion goes to ~20%, then gets stuck for 15 seconds, then continues again, always in "chunks" of a few % before getting stuck again. During the time the process is stuck, CPU is at 1%. RAM is not limiting, it is maybe at 70% or so and not going up. I don't get the same problem on other, even slower machines. The computer gets also stuck at 1% CPU doing nothing on other occasions, but for multithreading it is most frequent. Where should I look for the problem?

  Read the article

• Getting a "CPU over temperature error", but temperatures seem to be normal

  - by Luis Parker

  I built a PC with the following parts: CPU: i5-2500 Motherboard: Asus P8H67-M EVO rev 3.0 RAM: G-Skill Ripjaws Series 8GB (2 x 4GB) DDR3 1333 Video: GTX 560-Ti 1GB I used a crappy (but functioning) old case and a 500W Powercooler supply. The rig also includes 3 HDs and a DVD-RW. Whenever I push the system mildly it resets right away (looks more like power off/power on) and gives me a "CPU over temperature error". However, BIOS always reports <65ºC for the CPU at the moment of the reset, same as Core Temp and RealTemp. This is RealTemp's log since launching BF3 until the reset (just over 1 minute, as you can see) Just to be sure I've checked the CPU cooler and re-applied the thermal paste twice, but nothing changed. I'm not overclocking at all. What am I missing here? Could it be that the old power supply is generating this error? Maybe the mobo isn't reporting temperatures correctly? I don't have a clue on how to troubleshoot this, help Thanks in advance!

  Read the article

• Troubles Installing Windows 7 via USB. Flat install?

  - by Brian

  Hi friends, I've been struggling with this for a while. Windows 7 64-bit Enterprise edition just will not install on my Shuttle K45 system via a USB key. It hangs out during the install while copying files or while creating the partitions. The system is pretty standard and low-tech: IDE hard drives, no CD, 2G RAM. I am not sure what of the problem. Other than the Shuttle, I have a Apple MacBook Pro. On the MPB, I am running OS X, and Mint Linux and Window XP over Parallels. I have an ISO of Win7 that works (I installed it as a Parallels VM to make sure). I have used UltraISO and MS Windows 7 USB/DVD Download Tool to write it to the 8G USB key. Both seem to copy all the files correctly (with UltraISO, I asked it to verify). It boots via USB and the install looks just fine. Until it hangs, most of the time with a copying error of 0x80070241. So now I am trying to figure out if there are other ways I can install Windows 7 on this Shuttle system that has no CD drive. I've heard about a flat installation, however those all seem to be doing something from within Windows. I do have access to a command prompt from the Windows 7 install. Does anyone know if/how I can prep the Shuttle hard drive with Windows 7 installation and have Windows 7 install from the hard disk. I do not have an external enclosure for the IDE HD and I do not have any other system I can hook up to the hard drives. I do have an external Maxtor OneTouch drive available.

  Read the article

• Truecrypt files corrupted after moving PC into another case

  - by Dygerati

  I recently bought a new PC case and transferred all of my PC hardware into it. The only hardware modification was the addition of two identical ram modules. The entire process went smoothly, and everything worked and booted as before. The only side-effect I found when accessing one my of file-based hidden truecrypt volumes shortly there after. Some of the files in the volume - NOT all - seemed to be entirely corrupted. The directory and file names are garbled characters, but a few of the directories in the same volume appear and function normally. Also, all files in the non-hidden tc volume were still intact. Is this not weird? The only other real change I could think of would be that the hard drives were connected to different SATA ports on the mobo. I really don't know how the truecrypt encryption works well enough to know what could cause this...and the fact that not all the files were corrupted makes it more bizarre still. So, first off (and I'm not too hopeful on this point), would it be possible to restore these files? I had a backup of most, but not all of the files involved. Other than that I'm just curious how this happened and how I can prevent it next time. Thanks!

  Read the article

• How large is the performance loss for a 64-bit VirtualBox guest running on a 32-bit host?

  - by IllvilJa

  I have a 64-bit Virtualbox guest running Gentoo Linux (amd64) and it is currently hosted on a 32-bit Gentoo laptop. I've noticed that the performance of the VM is very slow compared to the performance of the 32-bit host itself. Also when I compare with another 32-bit Linux VM running on the same host, performance is significantly less on the 64-bit VM. I know that running a 64-bit VM on a 32-bit host does incur some performance penalties for the VM, but does anyone have any deeper knowledge of how large a penalty one might expect in this scenario, roughly speaking? Is a 10% slowdown something to expect, or should it be a slowdown in the 90% range (running at 1/10 the normal speed)? Or to phrase it in another way: would it be reasonable to expect that the performance improvement for the 64-bit VM increases so much that it is worth reinstalling the host machine to run 64-bit Gentoo instead? I'm currently seriously considering that upgrade, but am curious about other peoples experience of the current scenario. I am aware that the host OS will require more RAM when running in 64-bit, but that's OK for me. Also, I do know that one usually don't run a 64-bit VM on a 32-bit server (I'm surprised I even got the VM started in the first place) but things turned out that way when I tried to future proof the VM I was setting up and decided to make it 64-bit anyway.

  Read the article

• Windows 7 BSOD on boot after windows update

  - by Razor Storm

  After Windows updates today, I restarted my desktop (for the first time in a couple weeks), and on boot up ran into a BSOD: STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000355AB5A, 0xFFFFF880031CB3A8, 0xFFFFF880031CAC10) I tried system restore, but there was only 1 restore point which was from all the way back in January. I tried it anyway but after 10 minutes of running it said system restore could not be completed. Additional info: I checked my BIOS and it is detecting my rams. CPU is Intel Sandy Bridge i5-2500k overclocked to 4.3GHz. I reclocked it back to stock speeds (3.3 GHz) in case it was causing the issue (I highly doubt that it is). But the problem persists. Running Windows 7. 12 GB of RAM at 1333 MHz OS on 64gb SSD. What is causing this? How should I fix it? Also, if it is caused by windows update, is there a way to undo the update with command prompt? I tried safemode, and the blue screen comes up as well, but I am able to access command prompt.

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• 100% CPU when doing 4 or more concurrent requests with Magento

  - by pancake

  Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

  Read the article

• I think my laptop just died

  - by Joel Coehoorn

  I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• A very peculiar problem with an old pc and a newer laptop...

  - by user553492

  I got my old pc ( 248mb ram , 80 GB ) repaired and the tech people put XP in it .My newer laptop has UBUNTU 10.04 .now I only have one cable and one usb cord .So I connected my modem (with only one CAT5 port and 4 usb ports ) to laptop with CAT5 cable .Th internet is working fine . I also wanted to use net on older pc so I installed the usb drivers for win and it worked. But I got fed up of win xp and made a separate partition for FreeBSD which I planned to install .During the install I screwd up sumthing and now freebsd starts with a boot option with a ? mark in place of win xp .If I click on that it gives me a "NTLDR missing " msg. I tried connecting CAT5 cable between old and new pc and tried connecting my laptop with USB cable but nothing happend and then I realozed the modem doesnt have a WORKING usb driver for LINUX :( .FCUK ! .Freebsd doesnt` even detect the LAN cable if I use it for old pc . So basically I have a old pc that has FREEBSD which I can olny start and stare at the blank terminal console but works perfectly otherwise .FREEBSD was supposed to detect the LAN cable ??.And I have a laptop that has LINUX which only works if I connect it with a CAT5 cable .wtf . So what can I do with my old pc ??? any local server (if possible :( ) or some such thing ? or can u suggest any use .Im 18 and im into learning programming , coding .So I can practice it .Thankx !

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >