Search Results

Search found 4586 results on 184 pages for 'supported'.

Page 169/184 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• .NET Declarative Security: Why is SecurityAction.Deny impossible to work with?

  - by rally25rs

  I've been messing with this for about a day and a half now sifting through .NET reflector and MSDN docs, and can't figure anything out... As it stands in the .NET framework, you can demand that the current Principal belong to a role to be able to execute a method by marking a method like this: [PrincipalPermission(SecurityAction.Demand, Role = "CanEdit")] public void Save() { ... } I am working with an existing security model that already has a "ReadOnly" role defined, so I need to do exactly the opposite of above... block the Save() method if a user is in the "ReadOnly" role. No problem, right? just flip the SecurityAction to .Deny: [PrincipalPermission(SecurityAction.Deny, Role = "ReadOnly")] public void Save() { ... } Well, it turns out that this does nothing at all. The method still runs fine. It seems that the PrincipalPermissionAttribute defines: public override IPermission CreatePermission() But when the attribute is set to SecurityAction.Deny, this method is never called, so no IPermission object is ever created. Does anyone know of a way to get .Deny to work? I've been trying to make a custom secutiry attribute, but even that doesn't work. I tried to get tricky and do: public class MyPermissionAttribute : CodeAccessSecurityAttribute { private SecurityAction securityAction; public MyPermissionAttribute(SecurityAction action) : base(SecurityAction.Demand) { if (action != SecurityAction.Demand && action != SecurityAction.Deny) throw new ArgumentException("Unsupported SecurityAction. Only Demand and Deny are supported."); this.securityAction = action; } public override IPermission CreatePermission() { // do something based on the SecurityAction... } } Notice my attribute constructor always passes SecurityAction.Demand, which is the one action that would work previously. However, even in this case, the CreatePermission() method is still only called when the attribute is set to .Demand, and not .Deny! Maybe the runtime is actually checking the attribute instead of the SecurityAction passed to the CodeAccessSecurityAttribute constructor? I'm not sure what else to try here... anyone have any ideas? You wouldn't think it would be that hard to deny method access based on a role, instead of only demanding it. It really disturbed me that the default PrincipalPermission appears from within an IDE like it would be just fine doing a .Deny, and there is like a 1-liner in the MSDN docs that hint that it won't work. You would think the PrincipalPermissionAttribute constructor would throw an exception immediately if anything other that .Demand is specified, since that could create a big security hole! I never would have realized that .Deny does nothing at all if I hadn't been unit testing! Again, all this stems from having to deal with an existing security model that has a "ReadOnly" role that needs to be denied access, instead of doing it the other way around, where I cna just grant access to a role. Thanks for any help! Quick followup: I can actually make my custom attribute work by doing this: public class MyPermissionAttribute : CodeAccessSecurityAttribute { public SecurityAction SecurityAction { get; set; } public MyPermissionAttribute(SecurityAction action) : base(action) { } public override IPermission CreatePermission() { switch(this.SecurityAction) { ... } // check Demand or Deny } } And decorating the method: [MyPermission(SecurityAction.Demand, SecurityAction = SecurityAction.Deny, Role = "ReadOnly")] public void Save() { ... } But that is terribly ugly, since I'm specifying both Demand and Deny in the same attribute. But it does work... Another interesting note: My custom class extends CodeAccessSecurityAttribute, which in turn only extends SecurityAttribute. If I cnage my custom class to directly extend SecurityAttribute, then nothing at all works. So it seems the runtime is definately looking for only CodeAccessSecurityAttribute instances in the metadata, and does something funny with the SecurityAction specified, even if a custom constructor overrides it.

  Read the article

• Can't configure PAM + LDAP on Debian Lenny - Getting error=49 on server logs

  - by Jorge Suárez de Lis

  I've been migrating some servers and desktops using Ubuntu 10.04 from getting the users from an old OpenLDAP implementation to a newer Centos Active Directory. I haven't had any problems so far, until I reached a Debian Lenny server. I've set up the server as the others, setting /etc/ldap.conf and /etc/ldap/ldap.conf. However, when I issue "getent passwd", I get nothing from the LDAP server. Reading the pam_ldap manpage, I realized that /etc/ldap.conf was not an accepted file by pam_ldap -it worked with Ubuntu though-, so I renamed it to /etc/pam_ldap.conf. Same result. However, once I've changed the name of this file, when I login using SSH I get this on the LDAP server logs: [20/Jul/2012:11:19:40 +0200] conn=16501 fd=155 slot=155 connection from x.x.x.50 to 10.1.176.237 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:19:40 +0200] conn=16501 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:19:40 +0200] conn=16501 op=2 RESULT err=49 tag=97 nentries=0 etime=0 The password isn't working. I don't know that could be wrong, anything else seems to be OK. That user/password is working from another clients: [20/Jul/2012:11:29:39 +0200] conn=16528 fd=188 slot=188 connection from x.x.x.224 to 10.1.176.237 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 BIND dn="uid=ubuntu,ou=Applications,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=ubuntu,ou=applications,ou=citius,dc=inv,dc=usc,dc=es" [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 SRCH base="ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" scope=2 filter="(uid=jorge.suarez)" attrs=ALL [20/Jul/2012:11:29:39 +0200] conn=16528 op=1 RESULT err=0 tag=101 nentries=1 etime=0 notes=U [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 BIND dn="uid=jorge.suarez,ou=People,ou=CITIUS,dc=inv,dc=usc,dc=es" method=128 version=3 [20/Jul/2012:11:29:39 +0200] conn=16528 op=2 RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=jorge.suarez,ou=people,ou=citius,dc=inv,dc=usc,dc=es" I'm using SSHA for storing passwords on the LDAP server. Maybe this is not supported by Debian Lenny? On pam_ldap.conf, I've set up this, as in all the other servers: # Do not hash the password at all; presume # the directory server will do it, if # necessary. This is the default. pam_password md5 Also tried clear, but it didn't work. Anyways, it's weird that issuing getent passwd still gets me no users. However, if I use pamtest from the package libpam-dotfile to test login, it works. # pamtest ssh jorge.suarez Trying to authenticate <jorge.suarez> for service <ssh>. Password: Authentication successful. # pamtest foo jorge.suarez Trying to authenticate <jorge.suarez> for service <foo>. Password: Authentication successful. But "su" won't work also: # su jorge.suarez Id. descoñecido: jorge.suarez Just the output from getent passwd : # getent passwd root:x:0:0:root:/root:/bin/bash daemon:x:1:1:daemon:/usr/sbin:/bin/sh bin:x:2:2:bin:/bin:/bin/sh sys:x:3:3:sys:/dev:/bin/sh sync:x:4:65534:sync:/bin:/bin/sync games:x:5:60:games:/usr/games:/bin/sh man:x:6:12:man:/var/cache/man:/bin/sh lp:x:7:7:lp:/var/spool/lpd:/bin/sh mail:x:8:8:mail:/var/mail:/bin/sh news:x:9:9:news:/var/spool/news:/bin/sh uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh proxy:x:13:13:proxy:/bin:/bin/sh www-data:x:33:33:www-data:/var/www:/bin/sh backup:x:34:34:backup:/var/backups:/bin/sh list:x:38:38:Mailing List Manager:/var/list:/bin/sh irc:x:39:39:ircd:/var/run/ircd:/bin/sh gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh nobody:x:65534:65534:nobody:/nonexistent:/bin/sh libuuid:x:100:101::/var/lib/libuuid:/bin/sh Debian-exim:x:101:103::/var/spool/exim4:/bin/false statd:x:102:65534::/var/lib/nfs:/bin/false sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin luser:x:1000:1000:Usuario local de Burdeos,,,:/home/luser:/bin/bash messagebus:x:105:107::/var/run/dbus:/bin/false sge-admin:x:1001:1001:Administrador do SGE,,,:/home/cluster/sge-admin:/bin/bash ntp:x:107:110::/home/ntp:/bin/false haldaemon:x:108:111:Hardware abstraction layer,,,:/var/run/hald:/bin/false vde2-net:x:109:114::/var/run/vde2:/bin/false uml-net:x:110:115::/home/uml-net:/bin/false polkituser:x:111:116:PolicyKit,,,:/var/run/PolicyKit:/bin/false Debian-pxe:x:113:65534:Dummy user for Debian pxe package,,,:/home/Debian-pxe:/bin/false Nscd was stopped from the beginning.

  Read the article

• LDAP over SSL with an EFI Fiery printer

  - by austinian

  I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

  Read the article

• Passing Variables between views / view controllers

  - by Dan

  Hi I'm new to ObjectiveC / IPhoneSDK and I'm informally trying to study it on my own. What I'm basically trying to do is from one view there are 12 zodiac signs. When a user clicks one, it proceeds to the second view (with animation) and loads the name of the zodiac sign it clicked in a UILabel, that's it. Here are my codes: Lovescopes = 1st page Horoscopes = 2nd page Lovescopes4AppDelegate.h #import <UIKit/UIKit.h> #import "HoroscopesViewController.h" #import "Lovescopes4AppDelegate.h" @class Lovescopes4ViewController; @interface Lovescopes4AppDelegate : NSObject <UIApplicationDelegate> { UIWindow *window; Lovescopes4ViewController *viewController; HoroscopesViewController *horoscopesViewController; } -(void)loadHoroscope; -(void)loadMainPage; @property (nonatomic, retain) IBOutlet UIWindow *window; @property (nonatomic, retain) IBOutlet Lovescopes4ViewController *viewController; @property (nonatomic, retain) HoroscopesViewController *horoscopesViewController; @end Lovescopes4AppDelegate.m #import "Lovescopes4AppDelegate.h" #import "Lovescopes4ViewController.h" @implementation Lovescopes4AppDelegate @synthesize window; @synthesize viewController; @synthesize horoscopesViewController; -(void)loadHoroscope { HoroscopesViewController *aHoroscopeViewController = [[HoroscopesViewController alloc] initWithNibName:@"HoroscopesViewController" bundle:nil]; [self setHoroscopesViewController:aHoroscopeViewController]; [aHoroscopeViewController release]; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationTransition:UIViewAnimationTransitionFlipFromLeft forView:window cache:YES]; [viewController.view removeFromSuperview]; [self.window addSubview:[horoscopesViewController view]]; [UIView commitAnimations]; } -(void)loadMainPage { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationTransition:UIViewAnimationTransitionFlipFromRight forView:window cache:NO]; [horoscopesViewController.view removeFromSuperview]; [self.window addSubview:[viewController view]]; [UIView commitAnimations]; [horoscopesViewController release]; horoscopesViewController = nil; } - (void)applicationDidFinishLaunching:(UIApplication *)application { // Override point for customization after app launch [window addSubview:viewController.view]; [window makeKeyAndVisible]; } - (void)dealloc { [viewController release]; [window release]; [super dealloc]; } @end Lovescopes4ViewController.h #import <UIKit/UIKit.h> #import "HoroscopesViewController.h" @interface Lovescopes4ViewController : UIViewController { HoroscopesViewController *hvc; } -(IBAction)loadAries; @property (nonatomic, retain) HoroscopesViewController *hvc; @end Lovescope4ViewController.m #import "Lovescopes4ViewController.h" #import "Lovescopes4AppDelegate.h" @implementation Lovescopes4ViewController @synthesize hvc; -(IBAction)loadAries { NSString *selected =@"Aries"; [hvc loadZodiac:selected]; Lovescopes4AppDelegate *mainDelegate = (Lovescopes4AppDelegate *) [[UIApplication sharedApplication] delegate]; [mainDelegate loadHoroscope]; } HoroscopesViewController.h #import <UIKit/UIKit.h> @interface HoroscopesViewController : UIViewController { IBOutlet UILabel *zodiacLabel; } -(void)loadZodiac:(id)zodiacSign; -(IBAction)back; @property (nonatomic, retain) IBOutlet UILabel *zodiacLabel; @end HoroscopesViewController.m #import "HoroscopesViewController.h" #import "Lovescopes4AppDelegate.h" @implementation HoroscopesViewController @synthesize zodiacLabel; /* // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } */ /* // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; } */ /* // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ -(void)loadZodiac:(id)zodiacSign { zodiacLabel.text = [NSString stringWithFormat: @"%@", zodiacSign]; } -(IBAction)back { Lovescopes4AppDelegate *mainDelegate = (Lovescopes4AppDelegate *) [[UIApplication sharedApplication] delegate]; [mainDelegate loadMainPage]; }

  Read the article

• Windows Phone 7 Connect to SharePoint via SOAP

  - by Mitchell Skurnik

  I am making my second application for the Windows 7 Phone Series platform and I cannot seem to connect to a SharePoint server using https. 99% of the following is not my code. I have borrowed it from http://blog.daisley-harrison.com/blog/post/Practical-Silverlight-and-SharePoint-Integration-Part-Two.aspx untill I can further understand how SOAP works in W7P Series. I know that I need some way of sending credentials over but the win 7 API does not seem to let you. ServiceReferences.ClientConfig <?xml version="1.0" encoding="utf-8"?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="ViewsSoap" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" transferMode="Buffered"> <security mode="TransportCredentialOnly"/> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="https://my.secureconnection.com/_vti_bin/views.asmx" binding="basicHttpBinding" bindingConfiguration="ViewsSoap" contract="SharePointListService.ViewsSoap" name="ViewsSoap" /> </client> </system.serviceModel> </configuration> This is my maincode page: public partial class MainPage : PhoneApplicationPage { public MainPage() { InitializeComponent(); SupportedOrientations = SupportedPageOrientation.Portrait | SupportedPageOrientation.Landscape; try { Uri serviceUri = new Uri("https://my.secureconnection.com" + SERVICE_LISTS_URL); BasicHttpBinding binding; if (serviceUri.Scheme == "https") { binding = new BasicHttpBinding(BasicHttpSecurityMode.Transport); } else { binding = new BasicHttpBinding(BasicHttpSecurityMode.None); } EndpointAddress endpoint = new EndpointAddress(serviceUri); ListsSoapClient listSoapClient = new ListsSoapClient(binding, endpoint); NetworkCredential creds = new NetworkCredential("administrator", "iSynergy1", "server001"); //listSoapClient.ClientCredentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Identification; //listSoapClient.ClientCredentials.Windows.ClientCredential = creds; listSoapClient.GetListCollectionCompleted += new EventHandler<GetListCollectionCompletedEventArgs>(listSoapClient_GetListCollectionCompleted); listSoapClient.GetListCollectionAsync(); } catch (Exception exception) { handleException("Failed to get list collection", exception); } } #region ShowExceptionDetail Property public static readonly DependencyProperty ShowExceptionDetailDependencyProperty = DependencyProperty.Register("ShowExceptionDetail",typeof(bool),typeof(Page),new PropertyMetadata(true)); public bool ShowExceptionDetail { get { return (bool)GetValue(ShowExceptionDetailDependencyProperty); } set { SetValue(ShowExceptionDetailDependencyProperty, value); } } #endregion private void handleException(string context, Exception exception) { this.Dispatcher.BeginInvoke(delegate() { bool showExceptionDetail = this.ShowExceptionDetail; string message = ""; Exception next = exception; do { if (message.Length > 0) { message += ";" + Environment.NewLine; } if (next.Message == null || next.Message.Length == 0) { message += next.GetType().FullName; } else { message += next.Message; } if (showExceptionDetail) { if (next.Data.Count > 0) { bool first = true; message += " {"; foreach (string key in next.Data.Keys) { if (first) { first = false; } else { message += ", "; } message += key + "=\"" + next.Data[key] + "\""; } message += "}"; } if (next.InnerException != next) { next = next.InnerException; continue; } } next = null; } while (next != null); MessageBox.Show(message, context, MessageBoxButton.OK); }); } private const string SERVICE_LISTS_URL = "/_vti_bin/lists.asmx"; void listSoapClient_GetListCollectionCompleted(object sender, GetListCollectionCompletedEventArgs e) { try { myList.Text = e.Result.ToString(); } catch (Exception exception) { handleException("Failed to get list collection", exception); } } } When I run this and it gets to the "ListsSoapClient" part, it breaks. If you dig down into the error output it says access is denied. I have tried various methods of sending credentials but none seem to work. "ClientCredentials.Windows" is not supported and ClientCredentials.UsersName.Username is read only.

  Read the article

• Open source CMS for a university department

  - by Greg Kuperberg

  I realize that this type of question gets asked over and over again. Nonetheless, I want to ask a more specific version. I'm in a university math department. Long ago our sysadmins (or just one at the time) switched to a web content management system. At the time, Zope looked like an informed choice. We have used Zope for years, but at least in my opinion, it has always been a controversial decision. At the time I didn't understand why it was so important to have a web CMS. Now I see that it certainly is important, but I don't know that it should be Zope. The good (even necessary) features of Zope for us are: It's free and Linux-based. It is a true CMS and not something else (e.g. wiki or blog) It lets you write HTML and scripts. What I really don't like about Zope is that the outcome of using it is all-or-nothing in a lot of ways. At least in convenient use, it ends up dividing the enterprise into superusers who can do everything, and lusers who can't do anything (except write their own home pages in plain HTML). It has a huge user manual, which end users won't have time to read. Somehow with the access permissions, the simple thing to do is to let a few admins access all of the source and data and that's it. Since this is a math department, the user base varies from real novices to people who understand computers reasonably well. But as it stands, any change that involves Zope has to go through the sysadmins. When the sysadmins are in a hurry, sometimes they will also just add plain HTML pages to the web site instead of using the Zope framework. It doesn't help matters that Zope is fairly disk-intensive and fairly hype-intensive. Not to dwell on Zope too much, but I am wondering what is the right web CMS for a mixed user base of terminal novices, quick studies, and experienced users. Some users might want intermediate permissions, e.g. read permission but not write permission, or permission to change some subset of the pages or see some subset of the database tables. Also it should be Linux-based and open source and a little bit scalable, and of course widely used and well-supported is a good idea. I might guess that the answer is Drupal just because that was the general answer before, but I don't know if it is the right type of CMS for this purpose. (But note that Python is a relatively popular language in a math department, among other reasons because Sage is based on Python.) I can see that I didn't completely define the question and that people are guessing what type of site it is. It is the UC Davis Math Department. The main structure of the site is not suitable for a wiki and it is also not the same thing as a course environment like Moodle. Rather, the site is mostly structured as a generic medium-small enterprise. Some components of the site could be a wiki, Moodle, LaTeX plugin, Request Tracker, etc. However, the main issue is not these components. The main issue is that it would be better to decentralize management of the site. Right now, everything that is in the Zope CMS has to go through the sysadmins. Every other user in the department either has to put in a request to them, or write their own web pages with no help from Zope. There are two main reasons for this: (1) Other people in the department don't have time to read the Zope manual. (2) It's a hassle to set up intermediate permissions in Zope. However, there are other people in the department who know how to write computer programs and use markup languages. I wouldn't want a solution that assumes that users either can't be trusted with much more than drag-and-drop, or that they are IT professionals who sleep with documentation manuals. I'm wondering if Plone/Zope still has this quality, since certainly Zope by itself does. But I also wonder sometimes if common-sense flexibility is unfashionable these days, and that things in general have be either mindlessly easy or incredibly powerful.

  Read the article

• NSOperation unable to load data on the TableView

  - by yeohchan

  I have a problem in NSOperation. I tried many ways but it would run behind the screen, but will not make it appear on the my table view. Can anyone help me out with this. I am new to NSOperation. Recents.h #import <UIKit/UIKit.h> #import "FlickrFetcher.h" @interface Recents : UITableViewController { FlickrFetcher *fetcher; NSString *name; NSData *picture; NSString *picName; NSMutableArray *names; NSMutableArray *pics; NSMutableArray *lists; NSArray *namelists; NSOperationQueue *operationQueue; } @property (nonatomic,retain)NSString *name; @property (nonatomic,retain)NSString *picName; @property (nonatomic,retain)NSData *picture; @property (nonatomic,retain)NSMutableArray *names; @property (nonatomic,retain)NSMutableArray *pics; @property(nonatomic,retain)NSMutableArray *lists; @property(nonatomic,retain)NSArray *namelists; @end Recents.m #import "Recents.h" #import "PersonList.h" #import "PhotoDetail.h" @implementation Recents @synthesize picName,picture,name,names,pics,lists,namelists; // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization self.title=@"Recents"; } return self; } - (void)beginLoadingFlickrData{ NSInvocationOperation *operation = [[NSInvocationOperation alloc] initWithTarget:self selector:@selector(synchronousLoadFlickrData) object:nil]; [operationQueue addOperation:operation]; [operation release]; } - (void)synchronousLoadFlickrData{ fetcher=[FlickrFetcher sharedInstance]; NSArray *recents=[fetcher recentGeoTaggedPhotos]; [self performSelectorOnMainThread:@selector(didFinishLoadingFlickrDataWithResults:) withObject:recents waitUntilDone:NO]; } - (void)didFinishLoadingFlickrDataWithResults:(NSArray *)recents{ for(NSDictionary *dic in recents){ [names addObject:[fetcher usernameForUserID:[dic objectForKey:@"owner"]]]; if([[dic objectForKey:@"title"]isEqualToString:@""]){ [pics addObject:@"Untitled"]; }else{ [pics addObject:[dic objectForKey:@"title"]]; } NSLog(@"OK!!"); } [self.tableView reloadData]; [self.tableView flashScrollIndicators]; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; operationQueue = [[NSOperationQueue alloc] init]; [operationQueue setMaxConcurrentOperationCount:1]; [self beginLoadingFlickrData]; self.tableView.rowHeight = 95; } /* // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; } #pragma mark - #pragma mark Table View Data Source Methods - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return[names count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *SimpleTableIdentifier = @"SimpleTableIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:SimpleTableIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc]initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:SimpleTableIdentifier] autorelease]; } cell.detailTextLabel.text=[names objectAtIndex:indexPath.row]; cell.textLabel.text=[pics objectAtIndex:indexPath.row]; //UIImage *image=[UIImage imageWithData:[self.lists objectAtIndex:indexPath.row]]; //cell.imageView.image=image; return cell; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { fetcher=[[FlickrFetcher alloc]init]; PhotoDetail *scroll=[[PhotoDetail alloc]initWithNibName:@"PhotoDetail" bundle:nil]; scroll.titleName=[self.pics objectAtIndex:indexPath.row]; scroll.picture = [UIImage imageWithData:[self.lists objectAtIndex:indexPath.row]]; [self.navigationController pushViewController:scroll animated:YES]; }

  Read the article

• Can someone explain the "use-cases" for the default munin graphs?

  - by exhuma

  When installing munin, it activates a default set of plugins (at least on ubuntu). Alternatively, you can simply run munin-node-configure to figure out which plugins are supported on your system. Most of these plugins plot straight-forward data. My question is not to explain the nature of the data (well... maybe for some) but what is it that you look for in these graphs? It is easy to install munin and see fancy graphs. But having the graphs and not being able to "read" them renders them totally useless. I am going to list standard plugins which are enabled by default on my system. So it's going to be a long list. For completeness, I am also going to list plugins which I think to understand and give a short explanation as to what I think it's used for. Pleas correct if I am wrong with any of them. So let me split this questions in three parts: Plugins where I don't even understand the data Plugins where I understand the data but don't know what I should look out for Plugins which I think to understand Plugins where I don't even understand the data These may contain questions that are not necessarily aimed at munin alone. Not understanding the data usually mean a gap in fundamental knowledge on operating systems/hardware.... ;) Feel free to respond with a "giyf" answer. These are plugins where I can only guess what's going on... I hardly want to look at these "guessing"... Disk IOs per device (IOs/second)What's an IO. I know it stands for input/output. But that's as far as it goes. Disk latency per device (Average IO wait)Not a clue what an "IO wait" is... IO Service TimeThis one is a huge mess, and it's near impossible to see something in the graph at all. Plugins where I understand the data but don't know what I should look out for IOStat (blocks/second read/written)I assume, the thing to look out for in here are spikes? Which would mean that the device is in heavy use? Available entropy (bytes)I assume that this is important for random number generation? Why would I graph this? So far the value has always been near constant. VMStat (running/I/O sleep processes)What's the difference between this one and the "processes" graph? Both show running/sleeping processes, whereas the "Processes" graph seems to have more details. Disk throughput per device (bytes/second read/written) What's thedifference between this one and the "IOStat" graph? inode table usageWhat should I look for in this graph? Plugins which I think to understand I'll be guessing some things here... correct me if I am wrong. Disk usage in percent (percent)How much disk space is used/remaining. As this is approaching 100%, you should consider cleaning up or extend the partition. This is extremely important for the root partition. Firewall Throughput (packets/second)The number of packets passing through the firewall. If this is spiking for a longer period of time, it could be a sign of a DOS attack (or we are simply recieving a large file). It can also give you an idea about your firewall performance. If it's levelling out and you need more "power" you should consider load balancing. If it's levelling out and see a correlation with your CPU load, it could also mean that your hardware is not fast enough. Correlations with disk usage could point to excessive LOG targets in you FW config. eth0 errors (packets in/out)Network errors. If this value is increasing, it could be a sign of faulty hardware. eth0 traffic (bits/second in/out)Raw network traffic. This should correlate with Firewall throughput. number of threadsAn ever-increasing value might point to a process not properly closing threads. Investigate! processesBreakdown of active processes (including sleeping). A quick spike in here might point to a fork-bomb. A slowly, but ever-increasing value might point to an application spawning sub-processes but not properly closing them. Investigate using ps faux. process priorityThis shows the distribution of process priorities. Having only high-priority processes is not of much use. Consider de-prioritizing some. cpu usageFairly straight-forward. If this is spiking, you may have an attack going on, or a process is hogging the CPU. Idf it's slowly increasing and approaching max in normal operations, you should consider upgrading your hardware (or load-balancing). file table usageNumber of actively open files. If this is reaching max, you may have a process opening, but not properly releasing files. load averageShows an summarized value for the system load. Should correlate with CPU usage. Increasing values can come from a number of sources. Look for correlations with other graphs. memory usageA graphical representation of you memory. As long as you have a lot of unused+cache+buffers you are fine. swap in/outShows the activity on your swap partition. This should always be 0. If you see activity on this, you should add more memory to your machine!

  Read the article

• Is it possible to implement bitwise operators using integer arithmetic?

  - by Statement

  Hello World! I am facing a rather peculiar problem. I am working on a compiler for an architecture that doesn't support bitwise operations. However, it handles signed 16 bit integer arithmetics and I was wondering if it would be possible to implement bitwise operations using only: Addition (c = a + b) Subtraction (c = a - b) Division (c = a / b) Multiplication (c = a * b) Modulus (c = a % b) Minimum (c = min(a, b)) Maximum (c = max(a, b)) Comparisons (c = (a < b), c = (a == b), c = (a <= b), et.c.) Jumps (goto, for, et.c.) The bitwise operations I want to be able to support are: Or (c = a | b) And (c = a & b) Xor (c = a ^ b) Left Shift (c = a << b) Right Shift (c = a b) (All integers are signed so this is a problem) Signed Shift (c = a b) One's Complement (a = ~b) (Already found a solution, see below) Normally the problem is the other way around; how to achieve arithmetic optimizations using bitwise hacks. However not in this case. Writable memory is very scarce on this architecture, hence the need for bitwise operations. The bitwise functions themselves should not use a lot of temporary variables. However, constant read-only data & instruction memory is abundant. A side note here also is that jumps and branches are not expensive and all data is readily cached. Jumps cost half the cycles as arithmetic (including load/store) instructions do. On other words, all of the above supported functions cost twice the cycles of a single jump. Some thoughts that might help: I figured out that you can do one's complement (negate bits) with the following code: // Bitwise one's complement b = ~a; // Arithmetic one's complement b = -1 - a; I also remember the old shift hack when dividing with a power of two so the bitwise shift can be expressed as: // Bitwise left shift b = a << 4; // Arithmetic left shift b = a * 16; // 2^4 = 16 // Signed right shift b = a >>> 4; // Arithmetic right shift b = a / 16; For the rest of the bitwise operations I am slightly clueless. I wish the architects of this architecture would have supplied bit-operations. I would also like to know if there is a fast/easy way of computing the power of two (for shift operations) without using a memory data table. A naive solution would be to jump into a field of multiplications: b = 1; switch (a) { case 15: b = b * 2; case 14: b = b * 2; // ... exploting fallthrough (instruction memory is magnitudes larger) case 2: b = b * 2; case 1: b = b * 2; } Or a Set & Jump approach: switch (a) { case 15: b = 32768; break; case 14: b = 16384; break; // ... exploiting the fact that a jump is faster than one additional mul // at the cost of doubling the instruction memory footprint. case 2: b = 4; break; case 1: b = 2; break; }

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• Architecture for Qt SIGNAL with subclass-specific, templated argument type

  - by Barry Wark

  I am developing a scientific data acquisition application using Qt. Since I'm not a deep expert in Qt, I'd like some architecture advise from the community on the following problem: The application supports several hardware acquisition interfaces but I would like to provide an common API on top of those interfaces. Each interface has a sample data type and a units for its data. So I'm representing a vector of samples from each device as a std::vector of Boost.Units quantities (i.e. std::vector<boost::units::quantity<unit,sample_type> >). I'd like to use a multi-cast style architecture, where each data source broadcasts newly received data to 1 or more interested parties. Qt's Signal/Slot mechanism is an obvious fit for this style. So, I'd like each data source to emit a signal like typedef std::vector<boost::units::quantity<unit,sample_type> > SampleVector signals: void samplesAcquired(SampleVector sampleVector); for the unit and sample_type appropriate for that device. Since tempalted QObject subclasses aren't supported by the meta-object compiler, there doesn't seem to be a way to have a (tempalted) base class for all data sources which defines the samplesAcquired Signal. In other words, the following won't work: template<T,U> //sample type and units class DataSource : public QObject { Q_OBJECT ... public: typedef std::vector<boost::units::quantity<U,T> > SampleVector signals: void samplesAcquired(SampleVector sampleVector); }; The best option I've been able to come up with is a two-layered approach: template<T,U> //sample type and units class IAcquiredSamples { public: typedef std::vector<boost::units::quantity<U,T> > SampleVector virtual shared_ptr<SampleVector> acquiredData(TimeStamp ts, unsigned long nsamples); }; class DataSource : public QObject { ... signals: void samplesAcquired(TimeStamp ts, unsigned long nsamples); }; The samplesAcquired signal now gives a timestamp and number of samples for the acquisition and clients must use the IAcquiredSamples API to retrieve those samples. Obviously data sources must subclass both DataSource and IAcquiredSamples. The disadvantage of this approach appears to be a loss of simplicity in the API... it would be much nicer if clients could get the acquired samples in the Slot connected. Being able to use Qt's queued connections would also make threading issues easier instead of having to manage them in the acquiredData method within each subclass. One other possibility, is to use a QVariant argument. This necessarily puts the onus on subclass to register their particular sample vector type with Q_REGISTER_METATYPE/qRegisterMetaType. Not really a big deal. Clients of the base class however, will have no way of knowing what type the QVariant value type is, unless a tag struct is also passed with the signal. I consider this solution at least as convoluted as the one above, as it forces clients of the abstract base class API to deal with some of the gnarlier aspects of type system. So, is there a way to achieve the templated signal parameter? Is there a better architecture than the one I've proposed?

  Read the article

• Could not find rake-10.1.0 in any of the sources

  - by spuder

  I've got a ruby on rails application (gitlab) which is installed via puppet. Everything on the test system runs fine, but production generates an error about rake Running /home/git/gitlab-shell/bin/check Could not find rake-10.1.0 in any of the sources Run bundle install to install missing gems. Here is the full rake check: root@gitlab:/home/git# sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production Checking Environment ... Git configured for git user? ... yes Has python2? ... yes python2 is supported version? ... yes Checking Environment ... Finished Checking GitLab Shell ... GitLab Shell version >= 1.7.1 ? ... OK (1.7.1) Repo base directory exists? ... yes Repo base directory is a symlink? ... no Repo base owned by git:git? ... yes Repo base access is drwxrws---? ... yes update hook up-to-date? ... yes update hooks in repos are links: ... Could not find rake-10.1.0 in any of the sources Run `bundle install` to install missing gems. gitlab-shell self-check failed Try fixing it: Make sure GitLab is running; Check the gitlab-shell configuration file: sudo -u git -H editor /home/git/gitlab-shell/config.yml Please fix the error above and rerun the checks. Checking GitLab Shell ... Finished Checking Sidekiq ... Running? ... yes Number of Sidekiq processes ... 1 Checking Sidekiq ... Finished Checking GitLab ... Database config exists? ... yes Database is SQLite ... no All migrations up? ... yes GitLab config exists? ... yes GitLab config outdated? ... no Log directory writable? ... yes Tmp directory writable? ... yes Init script exists? ... yes Init script up-to-date? ... yes projects have namespace: ... Spencer Owen / bar ... yes Projects have satellites? ... Spencer Owen / bar ... can't create, repository is empty Redis version >= 2.0.0? ... yes Your git bin path is "/usr/bin/git" Git version >= 1.7.10 ? ... yes (1.8.4) Checking GitLab ... Finished The step 'gitlab-shell check' effectively runs the following command. If I run that command manually, everything passes. root@gitlab:/home/git/gitlab# sudo -u git -H /home/git/gitlab-shell/bin/check Check GitLab API access: OK Check directories and files: /home/git/repositories: OK /home/git/.ssh/authorized_keys: OK I have verified that rake is in fact installed root@gitlab:/home/git/gitlab# gem install rake -v 10.1.0 root@gitlab:/home/git/gitlab# bundle install root@gitlab:/home/git/gitlab# sudo -u git -H gem install rake -v 10.1.0 root@gitlab:/home/git/gitlab# sudo -u git -H bundle install Ruby is installed with update alternatives root@gitlab:/home/git/gitlab# sudo -u git -H ruby --version ruby 1.9.3p0 (2011-10-30 revision 33570) [x86_64-linux] root@gitlab:/home/git/gitlab# sudo -u git -H ls -l `which ruby` lrwxrwxrwx 1 root root 22 Oct 8 20:26 /usr/bin/ruby -> /etc/alternatives/ruby root@gitlab:/home/git/gitlab# sudo -u git -H gem --version 2.1.10 root@gitlab:/home/git/gitlab# sudo -u git -H ls -l `which gem` lrwxrwxrwx 1 root root 21 Oct 10 20:50 /usr/bin/gem -> /etc/alternatives/gem I've tried the solution mentioned below, to allow shared gems http://stackoverflow.com/questions/19284914/bundle-exec-fails-with-could-not-find-rake-10-1-0-in-any-of-the-sources http://stackoverflow.com/questions/18978002/could-not-find-rake-with-bundle-exec root@gitlab:/home/git/gitlab# cat /home/git/gitlab/.bundle/config --- BUNDLE_FROZEN: '1' BUNDLE_PATH: vendor/bundle BUNDLE_WITHOUT: development:test:postgres BUNDLE_DISABLE_SHARED_GEMS: '1' I've exhausted google, so I'm hoping for someone more familiar with ruby to offer any ideas how to resolve the error. Could not find rake-10.1.0 in any of the sources

  Read the article

• Someone please help google create instuctions that windows users understand. googles "instructions"

  - by nathan

  Below are the only instructions i managed to find from google on how to install the android NDK, it is written as if we all run Linux and presumes we all understand what these obscure tools are. My comments and questions appear in Italics if somone who knows unix and windows would translate for google that would be great! Android NDK Installation Introduction: Please read docs/OVERVIEW.TXT to understand what the Android NDK is and is not. This file gives instructions on how to properly setup your NDK. I. Requirements: The Android NDK currently requires a Linux, OS X or Windows host operating system. Windows users will need to install Cygwin (http://www.cygwin.com) to use it. Note that running the NDK under MSys is not supported. You will need to have the Android SDK and its dependencies installed. The NDK cannot generate final application packages (.apk files), only the shared library files that can go into them. IMPORTANT: The Android NDK can only be used to target system images using the Cupcake (1.5) or later releases of the platform. This is due to subtle toolchain and ABI related changed that make it incompatible with 1.0 and 1.1 system images. The NDK requires GNU Make 3.81 or later being available on your development system. Earlier versions of GNU Make might work but have not been tested. You can check this by running 'make -v' from the command-line. The output should look like: GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. ... On certain systems, GNU Make might be available through a different command like 'gmake' or 'gnumake'. For these systems, replace 'make' by the appropriate command when invoking the NDK build system as described in the documentation. Great some strange thing called gnu make.. if your not going to tell me what it does maybe you then at least you could give me a URL to it? The NDK also requires a Nawk or GNU Awk executable being available on your development system. Note that the original 'awk' program doesn't implement the 'match' and 'substr' functions used by the NDK build system. Ok another tool, with 1 of 2 possible names, but not the third... and again where should i download this?? On Windows, you will need to install a recent release of Cygwin to use the NDK. See http://www.cygwin.com for instructions. Woohoo a URL! download took about a day because these install instructions do not specify what parts to download. II. Preparing your installation prebuilt cross-toolchain binaries: After installing and unarchiving the NDK, you will need to run the following command from the root folder: build/host-setup.sh hello? windows dont run nothing but .exe .com or .dll, just tell me how you want me to run it.. This will test your setup and make sure the NDK can work properly. Nothing is said about where any of these things need to be installed to (what directory)

  Read the article

• Unable to connect SQL Server instance from Visual Studio 2008 Version 9.0

  - by salvationishere

  I am getting the below error from VS on an 32-bit XP Professional server even though I set Tools-Options-Database Tools-Data Connections to "SIDEKICK", which is the name of my computer. In other words SIDEKICK should default to the full SQLSERVER. In other words, I want VS to use SQLSERVER instead of SQLSERVER EXPRESS. And I can clearly see my database both from VS in the Server Explorer and also in SSMS 2008. Furthermore, I can view the tables of this database in Server Explorer from VS. I do not get any build errors. And it looks like all of the naming is consistent in my web.config file. I am developing my website according to a Microsoft tutorial, so I should not be getting an error. Yet I get the following exception when I run this code below: CreateAccounts.aspx.cs file protected void CreateAccountButton_Click(object sender, EventArgs e) { MembershipCreateStatus createStatus; //This line below is where the exception occurs MembershipUser newUser = Membership.CreateUser(Username.Text, Password.Text, Email.Text, passwordQuestion, SecurityAnswer.Text, true, out createStatus); And here is what the exception looks like: System.Web.HttpException was unhandled by user code Message="Unable to connect to SQL Server database." Source="System.Web" ErrorCode=-2147467259 StackTrace: at System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) at System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) at System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) at System.Web.Security.SqlMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.Security.Membership.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.Security.Membership.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, MembershipCreateStatus& status) at Membership_CreatingUserAccounts.CreateAccountButton_Click(Object sender, EventArgs e) in c:\Documents and Settings\Admin\My Documents\Visual Studio 2008\WebSites\WebSite2\Membership\CreatingUserAccounts.aspx.cs:line 24 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException: System.Web.HttpException Message="Unable to connect to SQL Server database." Source="System.Web" ErrorCode=-2147467259 StackTrace: at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) at System.Web.Management.SqlServices.Install(String database, String dbFileName, String connectionString) at System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) InnerException: System.Data.SqlClient.SqlException Message="The user instance login flag is not supported on this version of SQL Server. The connection will be closed." Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=14 LineNumber=65536 Number=18493 Procedure="" Server="." State=1 StackTrace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) InnerException: The web.config connection string looks like: <connectionStrings> <add name="SecurityTutorialsConnectionString" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|SecurityTutorialsDatabase3.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <membership defaultProvider="SecurityTutorialsSqlMembershipProvider"> <providers> <add name="SecurityTutorialsSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="SecurityTutorialsConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="SecurityTutorials" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership>

  Read the article

• Bad disks in ancient server

  - by Joel Coel

  I have a 1998-era Netware 3.12 server that runs everything on our campus: general ledger, purchasing, payroll, student information, grades, you name it. The server has an Adaptec RAID controller with two volumes: RAID 1, 2 17GB scsi disks, Seagate ST318417W RAID 5, 3 4GB scsi disks, 2 Seagate ST34573W and 1 ST34572W. We are currently in the early stages of a project to replace this system, but you don't just jump into a new system like that and so I need to keep this server running until at least November 2011. This week we had not one but two hard drives fail. Thankfully they are from different volumes and we're able to keep running for the moment, but given the close nature of these failures I have serious doubts that I'll be able to avoid catastrophic failure from this server through the November target as is without restoring the RAID redundancy — it'll only take one more drive failure anywhere and I'm completely hosed. We are fortunate enough to have exact match "spares" lying around for both drives, but the spares are in unknown condition. I tried swapping just them in, but the RAID controller isn't smart enough to handle this and it renders the system unbootable. As for the RAID controller itself, there is utility I can get into during POST via a Ctrl-A shortcut, but I can't do much useful from there. To actually manage volumes I must first boot in to Netware, at which point I can use CI/O Array Management Software Version 2.0 to actually look at volume information. I suspect that the normal way to manage things is to boot from a special floppy with the controller software on it, but that floppy is long gone. Going through the options in the RAID software, I think the only supported way to replace a disk in an existing RAID volume is to physically add the disk, boot up and configure it as a "spare" for a volume, force the volume to use the spare to replace an existing down disk (and at this point I'm only guessing) so that the down disk becomes the spare, repair the volume, remove the spare from the volume, and then shut down and remove the disk. Then start all over for the other failed disk. All this amounts to a lot of downtime, assuming I can even make it work and that my spares are any good. As for finding reliable spares, I have no clue where to even begin looking to find a new 4GB scsi drive, or even which exact scsi system I'm looking for, as it's gone through a few different iterations over time. Another option is to migrate this to a virtual machine (hyper-v), but all previous attempts we've made in this area have failed to get very far. When this machine was installed I was just graduating from high school, and so it requires lower level knowledge of netware and dos than I ever developed, or if I did have since forgotten (I'm not exactly a dos neophyte, either). Part of my problem is this is a high-use server, and taking it down for a few days to figure things out isn't gonna fly very well. As for the question, I'm looking for anything that might be helpful in this situation: a recommendation on a place to find good spares from this era, personal experience repairing RAID volumes using a similar controller or building a hyper-v vm from an old netware server, a line on a floppy with better software for the RAID controller, recommendation on a good Novell consultant in Nebraska that would be able to put things right, a whole other option I haven't considered yet, etc. Update: For backups, we have good (recently verified via restore) backups of the data only -- nothing for the software that actually runs things. Update 2: Just a progress report that I currently have a working Netware 3.12 install in VMWare Virtual Server 2.0, thanks largely to the guide I found here: http://cerbulescubogdan.blogspot.com/2010/11/novell-netware-312-on-vmware.html The next steps are preparing empty netware volumes to match the additional volumes on my existing server, taking a dump of everything on the C:\ drive and netware volumes on my existing server, and figuring out from that information what modules need added to netware, installing my licenses (we do still have that disk, if it's any good), and moving data over. I have approval to bring the server down for a week after the first of the year (sadly not before), so, aside from creating empty volumes, the rest of the work will have to wait until then. Final Update (Jan 5, 2011): I was able to get spares working in both raid arrays without data loss this week. Both are now listed by the controller as "FAULT TOLLERANT" (yay!). I was also able to build on the progress from my last update and now have a functional "spare" server in VMWare Server 2.0. The spare can run and use our erp software, but I can't put it into production because I can't (yet) print from that box (and I have no idea why). Even so, this VM will do in a pinch if I have no other choice, and between it and the repaired RAID arrays I'm comfortable pushing on until I can junk the machine in November.

  Read the article

• setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

  - by kostmo

  I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

  Read the article

• Windows 8, NVIDIA graphics recognition fails

  - by Roy Grubb

  I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

  Read the article

• Database call crashes Android Application

  - by Darren Murtagh

  i am using a Android database and its set up but when i call in within an onClickListener and the app crashes the code i am using is mButton.setOnClickListener( new View.OnClickListener() { public void onClick(View view) { s = WorkoutChoice.this.weight.getText().toString(); s2 = WorkoutChoice.this.height.getText().toString(); int w = Integer.parseInt(s); double h = Double.parseDouble(s2); double BMI = (w/h)/h; t.setText(""+BMI); long id = db.insertTitle("001", ""+days, ""+BMI); Cursor c = db.getAllTitles(); if (c.moveToFirst()) { do { DisplayTitle(c); } while (c.moveToNext()); } } }); and the log cat for when i run it is: 04-01 18:21:54.704: E/global(6333): Deprecated Thread methods are not supported. 04-01 18:21:54.704: E/global(6333): java.lang.UnsupportedOperationException 04-01 18:21:54.704: E/global(6333): at java.lang.VMThread.stop(VMThread.java:85) 04-01 18:21:54.704: E/global(6333): at java.lang.Thread.stop(Thread.java:1391) 04-01 18:21:54.704: E/global(6333): at java.lang.Thread.stop(Thread.java:1356) 04-01 18:21:54.704: E/global(6333): at com.b00348312.workout.Splashscreen$1.run(Splashscreen.java:42) 04-01 18:22:09.444: D/dalvikvm(6333): GC_FOR_MALLOC freed 4221 objects / 252640 bytes in 31ms 04-01 18:22:09.474: I/dalvikvm(6333): Total arena pages for JIT: 11 04-01 18:22:09.574: D/dalvikvm(6333): GC_FOR_MALLOC freed 1304 objects / 302920 bytes in 29ms 04-01 18:22:09.744: D/dalvikvm(6333): GC_FOR_MALLOC freed 2480 objects / 290848 bytes in 33ms 04-01 18:22:10.034: D/dalvikvm(6333): GC_FOR_MALLOC freed 6334 objects / 374152 bytes in 36ms 04-01 18:22:14.344: D/AndroidRuntime(6333): Shutting down VM 04-01 18:22:14.344: W/dalvikvm(6333): threadid=1: thread exiting with uncaught exception (group=0x400259f8) 04-01 18:22:14.364: E/AndroidRuntime(6333): FATAL EXCEPTION: main 04-01 18:22:14.364: E/AndroidRuntime(6333): java.lang.IllegalStateException: database not open 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.database.sqlite.SQLiteDatabase.insertWithOnConflict(SQLiteDatabase.java:1567) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.database.sqlite.SQLiteDatabase.insert(SQLiteDatabase.java:1484) 04-01 18:22:14.364: E/AndroidRuntime(6333): at com.b00348312.workout.DataBaseHelper.insertTitle(DataBaseHelper.java:84) 04-01 18:22:14.364: E/AndroidRuntime(6333): at com.b00348312.workout.WorkoutChoice$3.onClick(WorkoutChoice.java:84) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.view.View.performClick(View.java:2408) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.view.View$PerformClick.run(View.java:8817) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.os.Handler.handleCallback(Handler.java:587) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.os.Handler.dispatchMessage(Handler.java:92) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.os.Looper.loop(Looper.java:144) 04-01 18:22:14.364: E/AndroidRuntime(6333): at android.app.ActivityThread.main(ActivityThread.java:4937) 04-01 18:22:14.364: E/AndroidRuntime(6333): at java.lang.reflect.Method.invokeNative(Native Method) 04-01 18:22:14.364: E/AndroidRuntime(6333): at java.lang.reflect.Method.invoke(Method.java:521) 04-01 18:22:14.364: E/AndroidRuntime(6333): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:858) 04-01 18:22:14.364: E/AndroidRuntime(6333): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:616) 04-01 18:22:14.364: E/AndroidRuntime(6333): at dalvik.system.NativeStart.main(Native Method) i have notice errors when the application opens but i dont no what thet are from. when i take out the statements to do with the database there is no errors and everthign runs smoothly

  Read the article

• How to cope with developing against a poor 3rd party API/application?

  - by wsanville

  I'm a web developer, and my organization has recently started to use a proprietary ASP.NET CMS for our web sites. I was excited to get started using the CMS, thinking it would bring a lot of value to our end users and be fun to work with, since my skills are a good match for the types of projects we're using it for. That was about a year ago. Since then, we've ran into all kinds of issues, from blatant bugs in the product, to nasty edge cases in the APIs, to extremely poor documentation for developers. On about a weekly basis, we are forced to pursue workarounds and rewrite some of the out of the box functionality, and even find some of the basic features unusable. In many cases, since this is a closed source application (and obfuscated of course), there's nothing we can do as developers to solve these issues. So my question is, how does one attempt to develop a good application in such a scenario? The application mostly works when using the the exact out of the box behavior, or using one of the company's starter sites. However, my attempts to use the underlying APIs to implement slightly different, yet reasonable behavior has proved to be extremely time consuming (not to mention just as buggy), given the lack of good information about the APIs. I've given this a lot of thought, and my conflicting viewpoints are the following: Strongly advise against any customization to the CMS, as development time will rise exponentially, or even have an extremely high chance of failing. While this is accurate, I do not want to give the impression that I am not willing to code my own solutions to problems and take the initiative to implement something difficult or complex. I don't want to be perceived as someone who is not motivated, lazy, or not knowledgeable to do anything complex, because this is simply not the case. I love coding my own solutions, trying new/difficult things, I just dislike the vendor app we're using. Continue on the path I'm on now, which is hacking my way past all issues I encounter and try my best to deliver an application that meets the needs and specs exactly. My goals are to make it as seamless and easy to use as possible to the end user, even when integrating the CMS with our other applications internally. The problem I'm finding with this approach is it is very time consuming. I open support cases with the vendor on a regular basis to solve issues and to gain knowledge of their APIs, but this is extremely time consuming, and in some cases it leads to dead ends. I post on the vendors forums on a regular basis but have become frustrated as most of my posts get 0 replies. So, what would you, a reasonable developer, do in this case? How can I make the best of the situation? And just for fun, here are some of the code smells and anti-patterns I've dealt with using the product (aside from their own code blatantly failing): Use of StringBuilder to concatenate a giant string that is hard coded and does not change. They use it to concatenate their Javascript and write it out into the body tags of their pages. Methods that accept object or Microsoft.VisualBasic.Collection as the parameters. In the case of the VB Collection, the data is not a list of any kind, it's used instead of making a class. Methods that return a Hashtable of VB Collections Method names of the form MethodName_v45, MethodName_v20, etc... Multiple classes with the same name in different namespaces with different functionality/behavior. Intellisense that reads "Note: this parameter is non functional" Complete lack of coding standards, API is filled with magic numbers and magic strings. Properties with a getter of type object that accepts totally different things, like enum or strings, and throw exceptions at runtime when you pass in something not supported. And much, much, more...

  Read the article

• curl can't verify cert using capath, but can with cacert option

  - by phylae

  I am trying to use curl to connect to a site using HTTPS. But curl is failing to verify the SSL cert. $ curl --verbose --capath ./certs/ --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: ./certs/ * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option. I know about the -k option. But I do actually want to verify the cert. The certs directory has been properly hashed with c_rehash . and it contains: A Verisign intermediate cert Two self-signed certs The above site should be verified with the Verisign intermediate cert. When I use the --cacert option instead (and point directly to the Verisign cert) curl is able to verify the SSL cert. $ curl --verbose --cacert ./certs/verisign-intermediate-ca.crt --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: ./certs/verisign-intermediate-ca.crt CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using RC4-SHA * Server certificate: * subject: C=US; ST=State; L=City; O=Company; OU=ou1; CN=example.com * start date: 2011-04-17 00:00:00 GMT * expire date: 2012-04-15 23:59:59 GMT * common name: example.com (matched) * issuer: C=US; O=VeriSign, Inc.; OU=VeriSign Trust Network; OU=Terms of use at https://www.verisign.com/rpa (c)10; CN=VeriSign Class 3 Secure Server CA - G3 * SSL certificate verify ok. > HEAD / HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > < HTTP/1.1 404 Not Found HTTP/1.1 404 Not Found < Cache-Control: must-revalidate,no-cache,no-store Cache-Control: must-revalidate,no-cache,no-store < Content-Type: text/html;charset=ISO-8859-1 Content-Type: text/html;charset=ISO-8859-1 < Content-Length: 1267 Content-Length: 1267 < Server: Jetty(7.2.2.v20101205) Server: Jetty(7.2.2.v20101205) < * Connection #0 to host example.com left intact * Closing connection #0 * SSLv3, TLS alert, Client hello (1): In addition, if I try hitting one of the sites using a self signed cert and the --capath option, it also works. (Let me know if I should post an example of that.) This implies that curl is finding the cert directory, and it is properly hash. Finally, I am able to verify the SSL cert with openssl, using its -CApath option. $ openssl s_client -CApath ./certs/ -connect example.com:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify return:1 depth=2 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 verify return:1 depth=1 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 verify return:1 depth=0 /C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com verify return:1 --- Certificate chain 0 s:/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- Server certificate -----BEGIN CERTIFICATE----- <cert removed> -----END CERTIFICATE----- subject=/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 1563 bytes and written 435 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-SHA Session-ID: D65C4C6D52E183BF1E7543DA6D6A74EDD7D6E98EB7BD4D48450885188B127717 Session-ID-ctx: Master-Key: 253D4A3477FDED5FD1353D16C1F65CFCBFD78276B6DA1A078F19A51E9F79F7DAB4C7C98E5B8F308FC89C777519C887E2 Key-Arg : None Start Time: 1303258052 Timeout : 300 (sec) Verify return code: 0 (ok) --- QUIT DONE How can I get curl to verify this cert using the --capath option?

  Read the article

• GitLab on a fresh Ubuntu 13 EC2 instance

  - by Polly

  I've spun up a fresh Amazon EC2 instance for a micro Ubuntu 13 server to be used as a GitLab server. I know the specs are a little low, but it should serve well for my purposes. It has an elastic (static) IP address that I have created an A record for git.mydomain.com. The first thing I did to the instance was add 1GB of swap to keep it happy from a memory perspective. I then set the hostname of the box to be git.mydomain.com and followed https://github.com/gitlabhq/gitlabhq/blob/6-2-stable/doc/install/installation.md to the letter. Everything seems to have worked, except for the web server side of things. Doing a gitlab:check shows the following: Checking Environment ... Git configured for git user? ... yes Has python2? ... yes python2 is supported version? ... yes Checking Environment ... Finished Checking GitLab Shell ... GitLab Shell version >= 1.7.4 ? ... OK (1.7.4) Repo base directory exists? ... yes Repo base directory is a symlink? ... no Repo base owned by git:git? ... yes Repo base access is drwxrws---? ... yes update hook up-to-date? ... yes update hooks in repos are links: ... can't check, you have no projects Running /home/git/gitlab-shell/bin/check Check GitLab API access: /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `initialize': Connection refused - connect(2) (Errno::ECONNREFUSED) from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `open' from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `block in connect' from /usr/local/lib/ruby/2.0.0/timeout.rb:52:in `timeout' from /usr/local/lib/ruby/2.0.0/net/http.rb:877:in `connect' from /usr/local/lib/ruby/2.0.0/net/http.rb:862:in `do_start' from /usr/local/lib/ruby/2.0.0/net/http.rb:851:in `start' from /home/git/gitlab-shell/lib/gitlab_net.rb:62:in `get' from /home/git/gitlab-shell/lib/gitlab_net.rb:29:in `check' from /home/git/gitlab-shell/bin/check:11:in `<main>' gitlab-shell self-check failed Try fixing it: Make sure GitLab is running; Check the gitlab-shell configuration file: sudo -u git -H editor /home/git/gitlab-shell/config.yml Please fix the error above and rerun the checks. Checking GitLab Shell ... Finished Checking Sidekiq ... Running? ... yes Number of Sidekiq processes ... 1 Checking Sidekiq ... Finished Checking GitLab ... Database config exists? ... yes Database is SQLite ... no All migrations up? ... yes GitLab config exists? ... yes GitLab config outdated? ... no Log directory writable? ... yes Tmp directory writable? ... yes Init script exists? ... yes Init script up-to-date? ... yes projects have namespace: ... can't check, you have no projects Projects have satellites? ... can't check, you have no projects Redis version >= 2.0.0? ... yes Your git bin path is "/usr/bin/git" Git version >= 1.7.10 ? ... yes (1.8.3) Checking GitLab ... Finished It seems like I'm very nearly there. Searching on this error I have only found advice that unfortunately hasn't helped. I'm not using any kind of SSL setup, which a lot of the posts I found were about. I have tried appending 127.0.0.1 git.mydomain.com to /etc/hosts and giving the instance a reboot but there was no change. My config/gitlab.yml file has host: git.mydomain.com in it, and my gitlab-shell/config.yml has gitlab_url: "http://git.mydomain.com/" in it. I'm sure I'm missing something simple, but I've been through every relevant link I can find and have had no positive results; thank you in advance for any help!

  Read the article

• Problem converting MsSql to MySql Stored procedure

  - by karthik

  Original source of MsSql SP is here.. http://www.codeproject.com/KB/database/InsertGeneratorPack.aspx I am using the below MySql stored procedure, created by SQLWAYS [Tool to convert MsSql to MySql]. The purpose of this is to take backup of selected tables to a script file. when the SP returns a value {Insert statements}. When i Execute the Below SP, i am getting a weird Result Set : SQLWAYS_EVAL# ll(cast(UidSQLWAYS_EVAL# 0)),'0')+''','+SQLWAYS_EVAL# ll(UserNameSQLWAYS_EVAL# '+SQLWAYS_EVAL# ll(PasswordSQLWAYS_EVAL# '+ I see a lot of "SQLWAYS_EVAL#" in the code, which is produced in the result too. What values need to be passed instead of "SQLWAYS_EVAL#". So that i get the proper Insert statements for each record in the table. I am new to MySql. Please help me. Its Urgent. Thanks. DELIMITER $$ DROP PROCEDURE IF EXISTS `InsertGenerator` $$ CREATE DEFINER=`root`@`localhost` PROCEDURE `InsertGenerator`() SWL_return: BEGIN -- SQLWAYS_EVAL# to retrieve column specific information -- SQLWAYS_EVAL# table DECLARE v_string VARCHAR(3000); -- SQLWAYS_EVAL# first half -- SQLWAYS_EVAL# tement DECLARE v_stringData VARCHAR(3000); -- SQLWAYS_EVAL# data -- SQLWAYS_EVAL# statement DECLARE v_dataType VARCHAR(1000); -- SQLWAYS_EVAL# -- SQLWAYS_EVAL# columns DECLARE v_colName VARCHAR(50); DECLARE NO_DATA INT DEFAULT 0; DECLARE cursCol CURSOR FOR SELECT column_name,data_type FROM information_schema.`columns` -- WHERE table_name = v_tableName; WHERE table_name = 'tbl_users'; DECLARE CONTINUE HANDLER FOR SQLEXCEPTION BEGIN SET NO_DATA = -2; END; DECLARE CONTINUE HANDLER FOR NOT FOUND SET NO_DATA = -1; OPEN cursCol; SET v_string = CONCAT('INSERT ',v_tableName,'('); SET v_stringData = ''; SET NO_DATA = 0; FETCH cursCol INTO v_colName,v_dataType; IF NO_DATA <> 0 then -- NOT SUPPORTED print CONCAT('Table ',@tableName, ' not found, processing skipped.') close cursCol; LEAVE SWL_return; end if; WHILE NO_DATA = 0 DO IF v_dataType in('varchar','char','nchar','nvarchar') then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(',v_colName,'SQLWAYS_EVAL# ''+'); ELSE if v_dataType in('text','ntext') then -- SQLWAYS_EVAL# -- SQLWAYS_EVAL# else SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(',v_colName,'SQLWAYS_EVAL# 00)),'''')+'''''',''+'); ELSE IF v_dataType = 'money' then -- SQLWAYS_EVAL# doesn't get converted -- SQLWAYS_EVAL# implicitly SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# y,''''''+ isnull(cast(',v_colName,'SQLWAYS_EVAL# 0)),''0.0000'')+''''''),''+'); ELSE IF v_dataType = 'datetime' then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# time,''''''+ isnull(cast(',v_colName, 'SQLWAYS_EVAL# 0)),''0'')+''''''),''+'); ELSE IF v_dataType = 'image' then SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(convert(varbinary,',v_colName, 'SQLWAYS_EVAL# 6)),''0'')+'''''',''+'); ELSE SET v_stringData = CONCAT(v_stringData,'SQLWAYS_EVAL# ll(cast(',v_colName,'SQLWAYS_EVAL# 0)),''0'')+'''''',''+'); end if; end if; end if; end if; end if; SET v_string = CONCAT(v_string,v_colName,','); SET NO_DATA = 0; FETCH cursCol INTO v_colName,v_dataType; END WHILE; select v_stringData; END $$ DELIMITER ;

  Read the article

• non blocking client server chat application in java using nio

  - by Amith

  I built a simple chat application using nio channels. I am very much new to networking as well as threads. This application is for communicating with server (Server / Client chat application). My problem is that multiple clients are not supported by the server. How do I solve this problem? What's the bug in my code? public class Clientcore extends Thread { SelectionKey selkey=null; Selector sckt_manager=null; public void coreClient() { System.out.println("please enter the text"); BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in)); SocketChannel sc = null; try { sc = SocketChannel.open(); sc.configureBlocking(false); sc.connect(new InetSocketAddress(8888)); int i=0; while (!sc.finishConnect()) { } for(int ii=0;ii>-22;ii++) { System.out.println("Enter the text"); String HELLO_REQUEST =stdin.readLine().toString(); if(HELLO_REQUEST.equalsIgnoreCase("end")) { break; } System.out.println("Sending a request to HelloServer"); ByteBuffer buffer = ByteBuffer.wrap(HELLO_REQUEST.getBytes()); sc.write(buffer); } } catch (IOException e) { e.printStackTrace(); } finally { if (sc != null) { try { sc.close(); } catch (Exception e) { e.printStackTrace(); } } } } public void run() { try { coreClient(); } catch(Exception ej) { ej.printStackTrace(); }}} public class ServerCore extends Thread { SelectionKey selkey=null; Selector sckt_manager=null; public void run() { try { coreServer(); } catch(Exception ej) { ej.printStackTrace(); } } private void coreServer() { try { ServerSocketChannel ssc = ServerSocketChannel.open(); try { ssc.socket().bind(new InetSocketAddress(8888)); while (true) { sckt_manager=SelectorProvider.provider().openSelector(); ssc.configureBlocking(false); SocketChannel sc = ssc.accept(); register_server(ssc,SelectionKey.OP_ACCEPT); if (sc == null) { } else { System.out.println("Received an incoming connection from " + sc.socket().getRemoteSocketAddress()); printRequest(sc); System.err.println("testing 1"); String HELLO_REPLY = "Sample Display"; ByteBuffer buffer = ByteBuffer.wrap(HELLO_REPLY.getBytes()); System.err.println("testing 2"); sc.write(buffer); System.err.println("testing 3"); sc.close(); }}} catch (IOException e) { e.printStackTrace(); } finally { if (ssc != null) { try { ssc.close(); } catch (IOException e) { e.printStackTrace(); } } } } catch(Exception E) { System.out.println("Ex in servCORE "+E); } } private static void printRequest(SocketChannel sc) throws IOException { ReadableByteChannel rbc = Channels.newChannel(sc.socket().getInputStream()); WritableByteChannel wbc = Channels.newChannel(System.out); ByteBuffer b = ByteBuffer.allocate(1024); // read 1024 bytes while (rbc.read(b) != -1) { b.flip(); while (b.hasRemaining()) { wbc.write(b); System.out.println(); } b.clear(); } } public void register_server(ServerSocketChannel ssc,int selectionkey_ops)throws Exception { ssc.register(sckt_manager,selectionkey_ops); }} public class HelloClient { public void coreClientChat() { Clientcore t=new Clientcore(); new Thread(t).start(); } public static void main(String[] args)throws Exception { HelloClient cl= new HelloClient(); cl.coreClientChat(); }} public class HelloServer { public void coreServerChat() { ServerCore t=new ServerCore(); new Thread(t).start(); } public static void main(String[] args) { HelloServer st= new HelloServer(); st.coreServerChat(); }}

  Read the article

• SQL: Using a CASE Statement to update a 1000 rows at once, how??

  - by SoLoGHoST

  Ok, I would like to use a CASE STATEMENT for this, but I am lost with this. Basically, I need to update a ton of rows, but just on the "position" column. I need to update all "position" values from 0 - count(position) for each id_layout_position column per id_layout column. Here's what I got for a regular update, but I don't wanna throw this into a foreach loop, as it would take forever to do it. I'm using SMF (Simple Machines Forums), so it might look a little different, but the idea is the same, and CASE statements are supported... $smcFunc['db_query']('', ' UPDATE {db_prefix}dp_positions SET position = {int:position} WHERE id_layout_position = {int:id_layout_position} AND id_layout = {int:id_layout}', array( 'position' => $position++, 'id_layout_position' => (int) $id_layout_position, 'id_layout' => (int) $id_layout, ) ); Anyways, I need to apply some sort of CASE on this so that I can auto-increment by 1 all values that it finds and update to the next possible value. I know I'm doing this wrong, even in this QUERY. But I'm totally lost when it comes to CASES. Here's an example of a CASE being used within SMF, so you can see this and hopefully relate: $conditions = ''; foreach ($postgroups as $id => $min_posts) { $conditions .= ' WHEN posts >= ' . $min_posts . (!empty($lastMin) ? ' AND posts <= ' . $lastMin : '') . ' THEN ' . $id; $lastMin = $min_posts; } // A big fat CASE WHEN... END is faster than a zillion UPDATE's ;). $smcFunc['db_query']('', ' UPDATE {db_prefix}members SET id_post_group = CASE ' . $conditions . ' ELSE 0 END' . ($parameter1 != null ? ' WHERE ' . (is_array($parameter1) ? 'id_member IN ({array_int:members})' : 'id_member = {int:members}') : ''), array( 'members' => $parameter1, ) ); Before I do the update, I actually have a SELECT which throws everything I need into arrays like so: $disabled_sections = array(); $positions = array(); while ($row = $smcFunc['db_fetch_assoc']($request)) { if (!isset($disabled_sections[$row['id_group']][$row['id_layout']])) $disabled_sections[$row['id_group']][$row['id_layout']] = array( 'info' => $module_info[$name], 'id_layout_position' => $row['id_layout_position'] ); // Increment the positions... if (!is_null($row['position'])) { if (!isset($positions[$row['id_layout']][$row['id_layout_position']])) $positions[$row['id_layout']][$row['id_layout_position']] = 1; else $positions[$row['id_layout']][$row['id_layout_position']]++; } else $positions[$row['id_layout']][$row['id_layout_position']] = 0; } Thanks, I know if anyone can help me here it's definitely you guys and gals... Anyways, here is my question: How do I use a CASE statement in the first code example, so that I can update all of the rows in the position column from 0 - total # of rows found, that have that id_layout value and that id_layout_position value, and continue this for all different id_layout values in that table? Can I use the arrays above somehow? I'm sure I'll have to use the id_layout and id_layout_position values for this right? But how can I do this?

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >