Search Results

Search found 1525 results on 61 pages for 'ben henley'.

Page 17/61 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Automate Windows 8.1 Enterprise upgrade

    - by Ben M.
    I have been trying to find the necessary command line switches for automating the upgrade for my Windows 8 clients to Windows 8.1. I have the ISO extracted and I've run setup.exe /? but that doesn't tell me enough. I can't find any relevant information from search engines. Can anyone point me to some documentation or information on how to automate the upgrade so that it keeps user data, programs, etc? I know how to do it when running the installer manually, but I obviously do not wish to do that with 100+ machines.

    Read the article

  • Router and Switch VLAN Configuration for Isolated Network

    - by Ben
    I haven't worked with VLANs much in the past and I was hoping if I could get a good explanation of what I need to setup for this to work. I have a Netgear WNR2000v2 router and a Netgear GS108T smart switch currently in my network. The fourth port on the router connects to port one on the switch. I would like to be able to isolated port 8 on the switch for use as a "guest port" when I bring home malware infested PCs for repair. I figured the VLAN capabilities of the GS108T would be able to do this for me, but I think I have a misunderstanding of how the VLAN actually works. Port 8 needs internet access but should not be able to communicate with the rest of the PCs on the home network. The subnet for the home network is 192.168.1.0/24 and I would like the guest PC to have A) 192.168.1.64 or B) 192.168.2.2. I am reading a lot of stuff about port trunking and VLAN membership, but I am confused as to which setup needs to be in place to make this work. Any help is greatly appreciated! Let me know if there is more information I need to provide. Definitely looking to learn something from this project. Thanks!

    Read the article

  • How to activate Win XP from Windows 7 compatibility mode on MacOS Parallels 5

    - by Ben Hammond
    I am running Parallels Desktop 5.0.9344 for Mac. I am running Mac OS 10.6.3 10D2094 I have bought a retail copy of Window 7 professional specifically because I need the XP compatibility. Windows 7 is installed and working. I have problems with the XP activation Windows7 'Virtual PC' does not run under Parallels (strange error about Server Execution failed 0x80080005). I have used the Parallels Transporter to convert the "Windows XP Mode Base.vhd" file into a parallels Virtual Machine. This copy of XP now starts normally, however it records itself as unregistered. There was a KEY.txt file in the same directory as the .vhd file; although this file contains a valid-looking activation key, it does not appear to activate the instance of XP. I have also tried to enter the Win7 activation key; this does not work either. I have tried calling the two phone numbers; an automated system asked me to enter 56 digits through the telephone and then accused me of being a pirate. I believe it may be possible to install Win7 via Bootcamp, start WinXP under Virtual PC, activate it and then import this activated .vhd into Parallels; but that seems a long way round, and is far from certain. What can I do to get WinXP running under Mac Parallels Desktop ?

    Read the article

  • Ngnix as reverse proxy for Apache name-based vhosts

    - by Ben Carleton
    I am running several websites on Apache currently utilizing name-based vhosts. All of the sites are on the same server. I would like to add Ngnix on a new server to sit in front of Apache as a caching reverse proxy. What is the best way to handle the multiple name-based vhosts? Should I simply have Nginx handle the names and run each Apache vhost on a separate port? Or is there a way to just have Nginx pass the hostname to Apache and have apache take care of the domain names?

    Read the article

  • Windows service runs file locally but not on server

    - by Ben
    I created a simple Windows service in dot net which runs a file. When I run the service locally I see the file running in the task manager just fine. However, when I run the service on the server it won't run the file. I've checked the path to the file which is fine. I also checked the permissions on the folder and file, and they fine as well. Also there are no exceptions happening. Below is the code used to launch the process which runs the file. I posted this first on stack overflow, and some people were thinking this is a config issue, so I moved it here. Any ideas? try { // TODO: Add code here to start your service. eventLog1.WriteEntry("VirtualCameraService started"); // Create An instance of the Process class responsible for starting the newly process. System.Diagnostics.Process process1 = new System.Diagnostics.Process(); // Set the directory where the file resides process1.StartInfo.WorkingDirectory = "C:\\VirtualCameraServiceSetup\\"; // Set the filename name of the file to be opened process1.StartInfo.FileName = "VirtualCameraServiceProject.avc"; // Start the process process1.Start(); } catch (Exception ex) { eventLog1.WriteEntry("VirtualCameraService exception - " + ex.InnerException); }

    Read the article

  • Avoid Powerpoint(/Word) 2010 creating temporary files in working directory

    - by Ben
    When opening a temporary file, Powerpoint 2010 usually creates a temporary, hidden file called ~$filename.pptx in the same directory. This is undesirable, since it can cause unnecessary activity with e.g. Dropbox. Furthermore, the "Documents" folder should not be used for temporary files -- we have the %TEMP% folder for that. So, is it possible to have Powerpoint create its temporary files in %TEMP% instead? The following link suggests that it might not be possible: http://support.microsoft.com/kb/211632 Also, why does Microsoft not use the %TEMP% folder?

    Read the article

  • Add MS-DOS boot option to Windows 2000

    - by Ben Miller
    I've got an old laptop that is running Windows 2000 & Windows 98 in a multi-boot configuration. I need to add MS-DOS to that list of startup options. I've already added a primary partition, formatted it for FAT16 and made it bootable, and installed MS-DOS 6.22. My question is, how do I add my MS-DOS partition to the list of startup options? More information: My single hard drive has three primary partitions: 0: FAT32 Windows 2000 1: FAT32 Windows 98 2: FAT(16) MS-DOS 6.22 Currently, the boot-up screen lists Windows 2000 and Windows 98 as options, with Windows 2000 as the default choice. My boot.ini file currently looks like this: [Boot Loader] Timeout=30 Default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [Operating Systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect C:\="Microsoft Windows 98"

    Read the article

  • Software for making video tutorial

    - by Ben
    I'm looking for a good video tutorial software. It shouldn't be very complicated. It should be very easy to zoom in on specific locations on screen, as well as make highlights on screen. I have Camtasia Studio, but can't figure out how to do this. This functionality looks ridiculously complicated. http://www.techsmith.com/learn/camtasia/5/editing/zoom-n-pan.asp Free is preferred though low cost is OK too. I have both Mac and Windows. Thanks

    Read the article

  • Configuring gitweb on IIS?

    - by Ben Straub
    I'm trying to set up a git server for our development team, and there's a requirement that it run on a Windows machine. I have the base git/sshd setup working with gitolite, but I'm pretty new to IIS management, so I'm not sure how to proceed.

    Read the article

  • Share Point ACL on OSX Lion Server - Posix group always takes over ACLs

    - by Ben
    Trying to configure a share point on a Lion Server machine. The directory is created by the local server admin (serveradmin) and has rwxr-x--- given to it. The serveradmin user belongs to the local staff group so serveradmin readwrite staff group read Others none We have an OD group for all the employees (Workers) . Using the Server tool we've given Full Control to the share point: Workers Full Control serveradmin readwrite staff group read Others none We would assume that Workers could then do what they want on the share but that doesn't seem to be the case. It appears the POSIX permissions take over the ACL permissions for Worker. If I change the staff permission to readwrite then the Workers can create a file or folder in the share point. I would think the ACL should take over but it doesn't, posix always win, rendering ACL useless. Furthermore if I leave the readwrite permission for staff and take Write permission away for the Workers group then the posix group still wins. Essentially the Workers ACL does absolutely nothing. There are reports of similar problems in this Apple forum thread: https://discussions.apple.com/thread/3722901 The directory nesting fix suggested there doesn't work for us. Has anyone had similar issues and know how to fix this? Edit: in Workgroup Manager the employees user are set to primary group staff and given the additional OD group Workers. Changing their primary group doesn't help, it only shifts the problem onto Others taking over rights (logically) Edit 2: Ok, this is interesting, adding OD Users to the share's ACL works totally fine

    Read the article

  • OpenDNS servers initial response is very slow

    - by Ben Collins
    I've got a Time Warner cable ISP package (RoadRunner), and the modem they gave me doesn't allow me to specify which DNS servers to use; it always uses whatever the upstream dhcp server gives it. I prefer to use OpenDNS on my home network, so i've configured a couple of my PCs manually in the Windows adapter settings for IPv4 such that their IP addresses are obtained via DHCP, but the DNS server settings are fixed to the OpenDNS server IPs. Now, when I startup Windows on these PCs, it always takes 2-3 minutes to start receiving responses from the DNS servers; any request before that times out. While not debilitating, this is quite annoying. Any ideas why this might be happening?

    Read the article

  • HP dv6000 laptop powers on only if plugged in

    - by Ben
    My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

    Read the article

  • Linux DD command partition -to- partition

    - by Ben Jackson
    I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

    Read the article

  • What's Your Favorite Harmless Computer Practical Joke?

    - by Ben Griswold
    A couple of months ago, I returned from lunch to find that typing any key launched a random application. As I always lock my machine before walking away from it, my first thought was that a co-worker was playing a practical joke on me. As it turned out, the cause was random computer wonkiness. But just in case there's a need :), what's your favorite harmless computer practical joke? For example, would you alter host file entries to direct google.com to a random site or would you put tape over the optical sensor of a co-worker’s mouse?

    Read the article

  • Is there a way to make NoScript always allow .pdf files?

    - by Ben
    I'm using Firefox with NoScript to stop the bad stuff. I've also told Acrobat Reader to load .pdf files in it's own window instead of inside the browser (because sometimes it locks up, and then I would have to restart the browser). However, whenever I come across a .pdf file, I always get a new tab completely covered by the NoScript box. Then, I can click anywhere in that page, and NoScript asks me if I'm sure I want to allow it. Then, Acrobat Reader is launched in its own window, but the Firefox tab remains, and I have to close it. It seems like NoScript is getting in the way of Acrobat's attempt to just open the file without making a new tab. Is there a way to tell NoScript to always allow .pdf files (Or any other suggestion to make that annoying blank tab go away by itself)?

    Read the article

  • What metric captures why my OSX machine is so slow during XCode indexing

    - by Ben Flynn
    My entire machine OSX Lion machine slows down while XCode 4.4 is indexing. The CPU is less than 10% busy, I've got over 500 MB free memory, plenty of disk space, disk IO rate is not high, network activity is not high. Indexing just a few files can take minutes and builds are extremely slow. While this is going on, even loading a new web page in Chrome can be slow. Knowing how to fix it would be great, but more fundamentally how can I measure what is actually going slowly? What metrics should I be looking at? Nothing in Activity Monitor, iostat, top, or sar betray anything about what's going on to me. Even getting a man page is interminable.

    Read the article

  • Remove "Open with GIMP" from context menu?

    - by Ben
    I recently uninstalled GIMP on my Vista laptop, but there is still an Open with GIMP option on the context menu for most image file types, like JPEG and PNG. Clicking this option results in an error dialog. Is there any way to remove it?

    Read the article

  • Tips on Managing Podcast Subscriptions

    - by Ben Griswold
    I listen to a silly number of technical podcasts. I listen to enough of them that it is literally impossible to keep up. I nearly gave up and started dropping feeds from my subscription list when I heard Craig Shoemaker talk about his Polymorphic Podcast fast feed. The idea is he provides the same content at a higher speed so you can listen to his complete show in 3/4th the time. I tried it out with his recent jQuery Secrets with Dave Ward interview and I was shocked with the feed quality. It was a super clear, understandable conversation which only took a fraction of the time commitment. I experimented a bit and played the normal recording at 2x speed on my iPhone and the quality was once again just fine. But now I'm saving half of the time. I'm curious as to how you might manage your podcast subscriptions. Can you offer any tips or advice on how to get the best bang for your buck when it comes to technical podcast listening?

    Read the article

  • HTB.init / tc behind NAT

    - by Ben K.
    I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

    Read the article

  • Windows 7 file-based backup service

    - by Ben Voigt
    I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

    Read the article

  • SQL Server: One 12-drive RAID-10 array or 2 arrays of 8-drives and 4-drives

    - by ben
    Setting up a box for SQL Server 2008, which would give the best performance (heavy OLTP)? The more drives in a RAID-10 array the better performance, but will losing 4 drives to dedicate them to the transaction logs give us more performance. 12-drives in RAID-10 plus one hot spare. OR 8-drives in RAID-10 for database and 4-drives RAID-10 for transaction logs plus 2 hot spares (one for each array). We have 14-drive slots to work with and it's an older PowerVault that doesn't support global hot spares.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >