Search Results

Search found 9273 results on 371 pages for 'boot repair'.

Page 17/371 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • How to boot from a debootstrap based install?

    - by João Pinto
    I would like to boot a testing Ubuntu release from a directory (which contains a debootstrap based install). As far as I understand I just need someway to tell the boot process (initrd scripts?) that it should chroot() into the specified dir immediately after mounting the root partition, and then resume the regular upstart/init start. Could someone provide some instructions on how to achieve this?

    Read the article

  • How do I EFI boot Zenbook Prime UX31A from built-in card reader?

    - by Richard Ayotte
    How do I EFI boot Zenbook Prime UX31A from built-in card reader? Ubuntu 12.10 64bit has been copied onto an a SD card which I'm trying to boot from. When I power on my Zenbook and press ESC, the SD card isn't an option. There is an "Add boot option" in the BIOS but it requires a few a things that I'm not quite sure of. Add boot option - I guess any identifier works here. I've been entering ubuntu. Select Filesystem - The only option available is PCI(1F|2)\DevicePath(Type 3, SubType 12)HD(Part1,Sig787e6287-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Path for boot option - I've been entering ubuntu:\EFI\BOOT\BOOTx64.EFI Then I select Create and the new boot option appears in the boot menu but it doesn't work.

    Read the article

  • Grub messed up on dual boot machine - can't boot live usb

    - by Sam
    I have a laptop on which I had Win 7 and Ubuntu 12.04 installed. The hdd has two partitions (one primary and one extended). Grub wasn't loaing initially so I ran the boot disk repair tool which seemed to sort it out. However, I mistakenly removed python (long story) from the Ubuntu OS and this obviously messed up Ubuntu a lot. So I decided to reintsall both Win7 and Ubuntu 12.04 in an attempt to get things back fresh. Win 7 went fine, but now when I try and use the Live USB to install Ubuntu I get: error: no such device: grub rescue I guess grub is still there despite the Win 7 reinstall and it can't find the partition for Ubuntu (which I deleted prior to the fresh install). I have tried fixmbr in windows console and the boot-repair-disk utility, but no joy. I cannot boot the live usb so no access to linux. A real mess. Any suggestions from the community?

    Read the article

  • Should I install ubuntu on USB instead of HDD dual-boot?

    - by user2147243
    I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

    Read the article

  • Cannot Boot Win XP or Ubuntu from hard drive - get Input Not Supported

    - by Jim Hudspeth
    1) Downloaded 11.10 ISO file to Dell XP Workstation 2) Made bootable USB using Pendrivelinux 3) Installed to harddrive using option 1 (Install along side Windows) 4) Rebooted when instructed 5) Booted into Ubuntu just fine (first time) 6) Attempted restart - got first splash screen followed by "input not supported" - tapped ESC and eventually got into Ubuntu 7) Later attempts failed - got "input not supported"; no eventual boot 8) Many retries holding / tapping various keys - same result 9) Booted from USB - all files appear to be in place - can access GRUB on harddrive Suggestions appreciated - must to be able to boot XP. Thanks in advance

    Read the article

  • Screen cuts off part of GRUB on boot

    - by Matthew
    I've recently installed Ubuntu 11.10 on my Windows 7 desktop computer (on a seperate partition) Everything has gone smoothly except when I restart the computer and GRUB's loader screen shows, part of the screen gets cut off.. but once ive selected a boot option and hit enter, the screen readjusts to fill the entire monitor properly. So my question is, is there a way I can correct this ? Kind of annoying not being able to see the full boot option

    Read the article

  • cannot boot ubuntu 10.04 from usb

    - by Pragya Karki
    i tried to install ubuntu 10.04 from my silicon power 4gb pendrive. i have installed ubuntu 11.10. i downloaded "ubuntu-10.04.4-desktop-i386" from ubuntu from it's site and created a usb bootable drive using the instructions from the site. when i insert my usb to boot it gives following error: unknown keyword in configuration file: gfxboot vesamenu.c32: not a COM32R image boot: plz can u give me any solution..

    Read the article

  • Can't install Dual Boot from USB live - crash and nouvea problem

    - by user215064
    I just got a new laptop with Windows 8 pre-installed and I'm trying to make a dual boot with Ubuntu on my other hard drive but I can't make the Live USB work. I followed all the procedure for disabling the Security Boot and the UEFI setting but still doesn't work. It seems to start the installing procedure but I never get to choose anything: after a few seconds the screen turns black with an error message [18.707838] divide error: 0000 [#1] SMP (it goes on for several lines quoting some nouveau problem). Any ideas?

    Read the article

  • Cant boot ubuntu 12.10 from LiveCD

    - by user106316
    I had ubuntu installed for a few weeks now untill it had a kernel update and i canceled the wifi driver because it didnt worked, since then i wasent able to boot into ubuntu. I tryed to boot from livecd but it didnt worked either. I was able to succssecfuly install windows 7 64 bit now and also format my hard drive but i dont like windows and when i tryed to install ubunru again to still didnt worked. Please help me! Thanks :)

    Read the article

  • laptop will not boot after attempting upgrade to 13.10

    - by naerwenya
    I wanted to update my OS to the new 14.04 LTS. I was running 12.04 LTS before and followed the advice that upgrades should be done in steps. I first upgraded to 12.10, which seemed to work fine, and later to 13.10. This was all done through the Software Manager. After the last upgrade, I am no longer able to boot up my computer. The GNU GRUB menu opens up, but after selecting Ubuntu, it just stalls with a blank purple screen. If I select one of the other kernels, it also stalls after "Loading initial ramdisk...". I can't get into the Recovery Menu, either. I'm still rather new to Linux and may have possibly made the situation worse. Unfortunately, nothing has worked yet. I tried reinstalling from a flash drive and on my first attempt, the wizard recognised a previous installation. Unfortunately, the wizard also didn't like how my partitions were set up (I didn't change anything) and gave an error before closing. Unfortunately, I didn't write the error down, but it was about the boot partition. On the next attempt and ever since, the installation wizard has stated that "This computer currently has no detected operating systems." This is strange, because I could see the disk and even access my files when booting up from the USB. At this point, I decided to back up my important files using dropbox. Before losing all my files, I wanted to try the Boot-Repair tool, which also produced no results, and the files are no longer visible when booting from USB. The link to the Boot-Repair log is at http://paste.ubuntu.com/7457249/. If I then proceed through to the "Something else" installation option, I can see that the partitions still exist. This is what they look like: /dev/sda free space (size indicated 1MB) /dev/sda1 efi (33MB of 98 MB used) /dev/sda2 efi (352634MB of 746330MB used) /dev/sda3 swap (3725MB, none used) free space (0MB) Is there any way I might be able to get my computer to work and preserve my files as well?

    Read the article

  • dual boot install--no GRUB

    - by Jim Syyap
    My computer recently had a hardware upgrade and now runs on Windows 7. I decided to install Ubuntu 11.04 as dual boot using the ISO I got from ubuntu.com downloaded onto my USB stick. Restarting with the USB stick, I was able to install Ubuntu 11.04 choosing the option: Install Ubuntu 11.04 side by side with Windows 7 (or something like that). No errors were encountered on installation. However on restarting, there was no GRUB; the system went straight into Windows 7. Looking for answers, I found these: http://essayboard.com/2011/07/12/how-to-dual-boot-ubuntu-11-04-and-windows-7-the-traditional-way-through-grub-2/ http://ubuntuforums.org/showthread.php?t=1774523 Following their instructions, I got: Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb. => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos7)/boot/grub on this drive. sda1: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr sda2: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sdb1: __________________________________________________ ________________________ File system: vfat Boot sector type: SYSLINUX 4.02 debian-20101016 ...........>...r>....... ......0...~.k...~...f...M.f.f....f..8~....>2} Boot sector info: Syslinux looks at sector 1437504 of /dev/sdb1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. According to the info in the boot sector, sdb1 starts at sector 0. But according to the info from fdisk, sdb1 starts at sector 62. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys sdc1: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdc2: __________________________________________________ ________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdc5: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: sdc6: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: sdc7: __________________________________________________ ________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdc8: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: Going back into Ubuntu and running sudo fdisk -l , I got these: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002f393 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 19458 156185600 7 HPFS/NTFS Disk /dev/sdb: 2011 MB, 2011168768 bytes 62 heads, 62 sectors/track, 1021 cylinders Units = cylinders of 3844 * 512 = 1968128 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2ab9 Device Boot Start End Blocks Id System /dev/sdb1 * 1 1021 1962331 c W95 FAT32 (LBA) Disk /dev/sdc: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00261ddd Device Boot Start End Blocks Id System /dev/sdc1 * 1 60657 487222656+ 7 HPFS/NTFS /dev/sdc2 60657 121600 489527681 5 Extended /dev/sdc5 120563 121600 8337703+ 82 Linux swap / Solaris /dev/sdc6 120073 120562 3930112 82 Linux swap / Solaris /dev/sdc7 60657 119584 473328640 83 Linux /dev/sdc8 119584 120072 3923968 82 Linux swap / Solaris Should I proceed and do the following? Assuming Ubuntu 11.04 was installed on device sdb1, do this: sudo mount /dev/sdb1 /mnt Then do this: sudo grub-install--root-directory=/mnt /dev/sdb Notice there are two dashes in front of the root directory, and I'm not using sdb1 but sdb. Since the command in step 15 had reinstalled Grub 2, now we need to unmount the /mnt (i.e. sdb1) to clean up. Do this: sudo umount /mnt Reboot and remove Ubuntu 11.04 CD/DVD from disk tray. Log into Ubuntu 11.04 (you have no choice but it will make you log into Ubuntu 11.04 at this point). Open up a terminal in Ubuntu 11.04 (using real installation, not live CD/DVD). Execute this command: sudo update-grub Reboot the machine.

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

  • Triple boot vista xp ubuntu

    - by Artyom2033
    My partition table is pretty messed up from install/uninstall os and what I want to do now is to clear that and have vista/xp/ubuntu 12.04 on the same hard drive. I have create a new partition for xp on vista, everything was fine, but when I restarted my pc, I was getting the grub restore prompt. Even when I was trying to install xp, when the 'lunch windows' came, a wild BSOD appear. So I have deleted my partition for xp using gParted include in the 12.04 live cd. This haven't resolve the problem and I am still unable to boot in vista nor ubuntu. But I realy what this triple boot for LoL purpose (since my vista installation keep giving latency spike in this game and I hope this will not be the case in a fresh xp installation (I have tested it in ubuntu, the ping was good, but the fps wasn't). So what I want to do, is to install xp on a partition, then be able to boot on any of them without a problem from a nice installation of grub or something. gParted screenshot Thanks for help. Sorry for my English.

    Read the article

  • Ubuntu 14.04 boot error on Windows 8.1 - SYSLINUX 4.07 EDD

    - by nainai
    I want to replace Windows 8.1 that came with my laptop with Ubuntu 14.04. I keep getting a black screen with this line: SYSLINUX 4.07 EDD 2013-07-25 Copyright (C) 1994-2013 H. Peter Anvin et al Things I did before: turned off fast boot disabled secure boot switched to Legacy instead of UEFI (even though a tutorial I found said this isn't really needed anymore, I still did anyway because I read it from the laptop's user guide: "If you need to install a legacy operating system, such as Windows (that is, any operating system before Windows 8), Linux or Dos, etc on your computer, you must change the boot mode to Legacy support." I chose to load from USB. and then that SYSLINUX 4.77 EDD.... appears I tried to install using the same USB on an old Lenovo S10-3. It worked. Though that S10-3 runs Lubuntu. Still it's probably safe to say that it's not the USB that has problems, right? Thanks for any help. I can't wait to have Ubuntu :) edit: This might be useful info. The USB is 16GB X-Stor Fat32. I used YUMI.

    Read the article

  • very long boot up with Ubuntu 10.04.4

    - by wt70707
    I installed Ubuntu 10.04.3 on Atom. Then I do the update and upgrade with: #apt-get update #apt-get upgrade #apt-get dist-upgrade The system can boot up now but in almost 2 minutes. After power on and system test, it will stop at "Verifying DMI pool data" for 10 seconds before the GRUB menu comes up. Then after the choosing of one item, to the start up of OS there is 100 seconds of black screen. The start up after that is normal and the operations in the system is also normal. I am concerned with if it is of hardware problem, or just some problem with the kernel. Also I want to know after "Verifying DMI pool data" what is done? And after we choose an item in GRUB menu, what does the system do? And where can I see the procedure of the whole boot up? The /var/log/boot.log is too simple, and this is it: fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 /dev/mmcblk0p5: clean, ...... /dev/mmcblk0p1: clean, ...... * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox OK] * Setting sensors limits OK]

    Read the article

  • Ubuntu 12.04 NVIDIA GeForce Go 7600 black screen during boot

    - by Florian Schmidt
    I'm using Ubuntu as the only operating system since two years. In the first Ubuntu versions I had seen my BIOS screen and the boot screens. Actually im using Ubuntu 12.04 and my screen stays black until Ubuntu is started (both screens are missing). I guess this situation appeared the first time in Ubuntu 11 (not sure). I searched via google and tried the popular activities but was not able to fix my issue. I opened the laptop and checked all connections. I'm using boot option nomodeset. I had a look through many many web pages. I don't know how to continue and hope somebody could be helpful. My hardware: Acer Aspire 9300 AMD Turion 64 x2 NVIDIA GeForce Go 7600 (using proposed driver) lspci | grep NVIDIA 00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 03:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce Go 7600] (rev a1) So my question is what to do to fix the black screen during boot?

    Read the article

  • Dual-Boot Windows 7 and Ubuntu 12.04.1

    - by z3matt
    I installed Ubuntu 12.04.1 alongside Windows 7. I wanted to check out what it's all about. By the way, i actually like the interface a lot and the free office suite is very very nice. I love how they can save to the .docx as well. Onto the story: I installed it using this tutorial and I set it all up and everything and things were great. I used the EasyBCD 2.2 Tool and created an Ubuntu 12.04.1 entry and when I boot the computer the Windows 7 and Ubuntu 12.04.1 option show up. However, when I click Ubuntu it does not boot. It say and error and says I must put in the Windows CD to repair or something like this. Here's my system specs: ASRock Extreme4 (EUFI BIOS) Corsair Vengaence 2x4GB nVidia GeForce 9800GT i5-3570K 3.4GHz Corsair 620W Modular 500GB WD Caviar Blue I have no clue what could be wrong with it and I would love any assistance. I am willing to mess around and if something happens wrong I can just reinstall windows and it won't be a huge deal. Thank you very much! Here are my partitions I made: /boot 500MB / 10000MB /home 20000MB swap area 4000MB BIOS 4000MB

    Read the article

  • boot up fails. drops to initramfs prompt 12.04

    - by dpm
    I am running an HP pavilion dv6000 dual boot win7 and Ubuntu 12.04. (well, up until today). after a reboot, the boot process drops to the busy box shell and i end up at the prompt: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Ive been researching others who have had this same problem, but haven't been able to find any of those solutions to work for me. I tried the method described here: http://www.proposedsolution.com/solutions/ubuntu-booting-to-initramfs-prompt/ and after the final command mount -t ntfs-3g /dev/sda1 /root -o force it does nothing and gives me another (initramfs) prompt. I can boot to a live CD (USB) and get to a terminal, but it doesn't seem to do much good, as I can see the /dev/sda1 in the ls command, but it doesn't recognize it when I try to cd to it. My command line skills are very green, and am just starting to grasp them. One more question: using the command fdisk -l how can I tell which mount point (sda1/sda2) is my windows partition and which one is Ubuntu? Any help? I'm in a bit over my head right now...

    Read the article

  • UEFI Boot Failure - Hang after Printing USB Information

    - by James
    I'm experiencing a really weird boot problem. With both 12.10 and 12.04LTS, the vast majority of kernels (and initrds) that I've tried boot, but hang immediately after printing out information about USB devices. This isn't exactly a full "hang" so to speak, as if I plug in a flash drive, I see information and a /dev/sd* entry printed to the screen. Post/pre-init scripts are not run, there is no handoff, nor busybox or VT prompt. Virtual terminals can't be changed (with Ctrl-Alt-Fx). For what I can see, init may have not been executed yet. With certain kernel and OS combinations however, (specifically 3.2.0-29), I get a full boot and am able to use the OS as if there is no problem. After 3.2.0-29, I've been hard pressed to find a kernel that works. Any idea what's happening or how to fix this? Or even a road to take? I've exhausted the first five pages of Google for every search term I can think of. This is a Lenovo Z580 (i5-3210M) with Phoenix SecureCore Tiano firmware, if that helps any.

    Read the article

  • New Dell Vostro 3550 will not boot into Live CD

    - by rich97
    I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

    Read the article

  • Serious error on first attempts to dual boot Ubuntu 14.04 with Win7

    - by beetle
    I downloaded Ubuntu 14.04 from the website which I saved to my desktop with WinRar. My trial with winrar had expired so I have now tried it with Active@Isoburner but I'm getting no further. I eventually got it burnt onto a DVD(4.7gb) and tried to boot from DVD and normally. Neither way works. It looks like its about to boot but then a message appears saying that a serious error has occurred...the disk drive for /tmp is not ready yet or not present...press I to ignore, s to skip or m for manual... At this point I'm lost and unsure what to do. My laptop Toshiba Equium A210-17I is over 5 or 6 years old. Available space on the Hard Drive is 24gb. 2gb RAM. It originally came with Windows Vista Home Premium edition but about a year ago or more a friend wiped it clean for me as I was having no end of problems with Vista. He installed Windows 7 Ultimate(which I don't have a disc for). How can I resolve this issue and get Ubuntu to boot up? Do I have to install a previous version of Ubuntu first? Any advice or help would be greatly appreciated. Kind regards. Beetle.

    Read the article

  • Failure to Boot Windows 7 after Ubuntu install

    - by Mike
    My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

    Read the article

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Why can't I boot from portable HD?

    - by user11239
    I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >