Search Results

Search found 1417 results on 57 pages for 'brian hawk'.

Page 17/57 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• SSL Certificate error: verify error:num=20:unable to get local issuer certificate

  - by Brian

  I've been trying to get an SSL connection to an LDAPS server (Active Directory) to work, but keep having problems. I tried using this: openssl s_client -connect the.server.edu:3269 With the following result: verify error:num=20:unable to get local issuer certificate I thought, OK, well server's an old production server a few years old. Maybe the CA isn't present. I then pulled the certificate from the output into a pem file and tried: openssl s_client -CAfile mycert.pem -connect the.server.edu:3269 And that didn't work either. What am I missing? Shouldn't that ALWAYS work?

  Read the article

• Can't Access TFS 2010 Beta 2 from Visual Studio 2010 Beta 2 when domain joined

  - by Brian Sullivan

  I'm experimenting with an installation of TFS 2010 Beta 2 on a virtual machine under VirtualBox running Windows Server 2008. When I've got the server in a workgroup, I can connect to it from Visual Studio just fine, as long as I provide credentials for a local user on the server machine when prompted by the "Connect to Team Foundation Server" dialog. The desktop I'm running Visual Studio on is joined to a domain. However, when I join the server to the domain, I can no longer connect to it from Visual Studio. I get a pretty generic error message: "TF31002 - Unable to connect to team foundation server". It gives me several different possible problems, including an incorrect address or an incorrect username and password. I've already added the domain Windows identity with which I'm logged on the the desktop to the TFS Admins group on the server, so I don't think it's a username/password problem. I've also tried putting the literal IP address of the server in the dialog address box instead of the machine name, but still no dice. I made sure that network discovery was enabled on the server, too, and can navigate to "\\webserver2008" in Windows Explorer without any problems. Shouldn't be a firewall problem, since the TFS install creates the appropriate exceptions in Windows Firewall. It's all a bit confusing, since it seems to work when the server is in a workgroup. Note: I'm a dev, not an admin, so there are many subtleties of server administration with which I'm not familiar. Please make no assumptions about what I may or may not have tried; what may be obvious to you may have never occurred to me. Thanks in advance!

  Read the article

• How do I bypass pkgadd signature verification?

  - by Brian Knoblauch

  Trying to install CollabNet Subversion Client on Solaris x64, but I'm hung up with: ## Verifying signature for signer <Alexander Thomas(AT)> pkgadd: ERROR: Signature verification failed while verifying certificate <subject=Alexander Thomas(AT), issuer=Alexander Thomas(AT)>:<self signed certificate>. Any way to just bypass the certificate check? None of the options listed in the man page seemed appropriate.

  Read the article

• Project Server 2007 install issue - ProjectEventService won't start

  - by Brian Meinertz

  Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

  Read the article

• How-To Configure Weblogic, Agile PLM and an F5 LTM

  - by Brian Dunbar

  Agile, Weblogic, and an F5 walk into a bar ... I've got this Agile PLM v 9.3 Running on WebLogic, two managed servers. An F5 BigIP LTM. We're upgrading from Agile v 9.2.1.4 running on OAS. The problem is that while the Windows client works fine the Java client does not. My setup is identical to one outlined in F5's doc: http://www.f5.com/pdf/deployment-guides/bea-bigip45-dg.pdf When I launch the java client it returns this error "Server is not valid or is unavailable." Oracle claims Agile PLM is setup correctly, but won't comment on the specifics of the load balancer. F5 reports the configuration is correct but can't comment on the specifics of the application. I am merely the guy in a vortex of finger-pointing who wants my application to work. It's that or give up on WLS and move back to OAS. Which has it's own problems but at least we know how it works. Any ideas?

  Read the article

• Mac OS X bypass proxy for certain domains

  - by Brian

  In college I'm behind a proxy. When I try to visit one of my local Apache virtual hosts behind the proxy, then my college DNS attempts to resolve the host, thus bypassing my local host file. In the advanced setting for proxies you seem to be able to enter values into "Bypass proxy settings for these Hosts & Domains". I added the last 2 to the end - "*.local, 169.254/16, *.dev, *.sb". But it doesn't work. Is there a solution?

  Read the article

• Lighttpd 403 Errors on HTML and PHP pages

  - by Brian

  I installed lighttpd on CentOS 5.5 64-bit. Everything seems fine and running except I cannot get past 403 errors on both HTML and PHP pages. I have used CHMOD and CHOWN, changed ownership in the config file, done everything possible and have been stuck for 2 days. Appreciate any help, and here's hoping to a stupid error on my part. Here is the log file with debug options on: 2011-02-21 11:23:13: (request.c.304) fd: 7 request-len: 408 GET /index.html HTTP/1.1 Host: 10.0.1.8 User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Cache-Control: max-age=0 2011-02-21 11:23:13: (response.c.241) run condition 2011-02-21 11:23:13: (response.c.300) -- splitting Request-URI 2011-02-21 11:23:13: (response.c.301) Request-URI : /index.html 2011-02-21 11:23:13: (response.c.302) URI-scheme : http 2011-02-21 11:23:13: (response.c.303) URI-authority: 10.0.1.8 2011-02-21 11:23:13: (response.c.304) URI-path : /index.html 2011-02-21 11:23:13: (response.c.305) URI-query : 2011-02-21 11:23:13: (response.c.349) -- sanatising URI 2011-02-21 11:23:13: (response.c.350) URI-path : /index.html 2011-02-21 11:23:13: (response.c.470) -- before doc_root 2011-02-21 11:23:13: (response.c.471) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.472) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.473) Path : 2011-02-21 11:23:13: (response.c.521) -- after doc_root 2011-02-21 11:23:13: (response.c.522) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.523) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.524) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.541) -- logical -> physical 2011-02-21 11:23:13: (response.c.542) Doc-Root : /srv/www/lighttpd 2011-02-21 11:23:13: (response.c.543) Rel-Path : /index.html 2011-02-21 11:23:13: (response.c.544) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.561) -- handling physical path 2011-02-21 11:23:13: (response.c.562) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.608) -- access denied 2011-02-21 11:23:13: (response.c.609) Path : /srv/www/lighttpd/index.html 2011-02-21 11:23:13: (response.c.128) Response-Header: HTTP/1.1 403 Forbidden Content-Type: text/html Content-Length: 345 Date: Mon, 21 Feb 2011 16:23:13 GMT Server: lighttpd/1.4.28 Here is the directory listing. I used CHOWN to set to lighttpd:lighttpd [root@localhost lighttpd]# ls -al total 40 drwxrwxrwx 2 lighttpd lighttpd 4096 Feb 21 10:48 . drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 .. -rwxrwxrwx 1 lighttpd lighttpd 10 Feb 20 08:32 index.html -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:48 index.php -rwxrwxrwx 1 lighttpd lighttpd 20 Feb 21 10:39 info.php [root@localhost lighttpd]# Requested Commands: [root@localhost lighttpd]# ls -ld / /srv /srv/www drwxr-xr-x 22 root root 4096 Feb 21 04:39 / drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 20 07:38 /srv drwxrwxrwx 3 lighttpd lighttpd 4096 Feb 21 10:57 /srv/www [root@localhost lighttpd]# ps auxZ | grep lighttpd root:system_r:httpd_t lighttpd 3842 0.0 0.2 48368 896 ? S 12:24 0:00 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf root:system_r:unconfined_t:SystemLow-SystemHigh root 3845 0.0 0.2 61152 764 pts/0 R+ 12:24 0:00 grep lighttpd

  Read the article

• 500 internal server error on certain page after a few hours

  - by Brian Leach

  I am getting a 500 Internal Server Error on a certain page of my site after a few hours of being up. I restart uWSGI instance with uwsgi --ini /home/metheuser/webapps/ers_portal/ers_portal_uwsgi.ini and it works again for a few hours. The rest of the site seems to be working. When I navigate to my_table, I am directed to the login page. But, I get the 500 error on my table page on login. I followed the instructions here to set up my nginx and uwsgi configs. That is, I have ers_portal_nginx.conf located i my app folder that is symlinked to /etc/nginx/conf.d/. I start my uWSGI "instance" (not sure what exactly to call it) in a Screen instance as mentioned above, with the .ini file located in my app folder My ers_portal_nginx.conf: server { listen 80; server_name www.mydomain.com; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/home/metheuser/webapps/ers_portal/run_web_uwsgi.sock; } } My ers_portal_uwsgi.ini: [uwsgi] #user info uid = metheuser gid = ers_group #application's base folder base = /home/metheuser/webapps/ers_portal #python module to import app = run_web module = %(app) home = %(base)/ers_portal_venv pythonpath = %(base) #socket file's location socket = /home/metheuser/webapps/ers_portal/%n.sock #permissions for the socket file chmod-socket = 666 #uwsgi varible only, does not relate to your flask application callable = app #location of log files logto = /home/metheuser/webapps/ers_portal/logs/%n.log Relevant parts of my views.py data_modification_time = None data = None def reload_data(): global data_modification_time, data, sites, column_names filename = '/home/metheuser/webapps/ers_portal/app/static/' + ec.dd_filename mtime = os.stat(filename).st_mtime if data_modification_time != mtime: data_modification_time = mtime with open(filename) as f: data = pickle.load(f) return data @a bunch of authentication stuff... @app.route('/') @app.route('/index') def index(): return render_template("index.html", title = 'Main',) @app.route('/login', methods = ['GET', 'POST']) def login(): login stuff... @app.route('/my_table') @login_required def my_table(): print 'trying to access data table...' data = reload_data() return render_template("my_table.html", title = "Rundata Viewer", sts = sites, cn = column_names, data = data) # dictionary of data I installed nginx via yum as described here (yesterday) I am using uWSGI installed in my venv via pip I am on CentOS 6 My uwsgi log shows: Wed Jun 11 17:20:01 2014 - uwsgi_response_writev_headers_and_body_do(): Broken pipe [core/writer.c line 287] during GET /whm-server-status (127.0.0.1) IOError: write error [pid: 9586|app: 0|req: 135/135] 127.0.0.1 () {24 vars in 292 bytes} [Wed Jun 11 17:20:01 2014] GET /whm-server-status => generated 0 bytes in 3 msecs (HTTP/1.0 404) 2 headers in 0 bytes (0 switches on core 0) When its working, the print statement in the views "my_table" route prints into the log file. But not once it stops working. Any ideas?

  Read the article

• What does 1080p mean in laptop resolution?

  - by Brian

  Dell is selling a laptop (Studio 15) where the options for screen resolution are 720p, 900p, and 1080p. What do they mean? I've found a Wikipedia entry that lists the old confusing (UXGA, WUXGA, &c) names and seems to indicate that 1080p might be 1920x1080. It has no information on 900p or 720p. Really, it was bad enough with the WUXGA style descriptions. I think vendors should tell you what they're selling. If you know what the screen resolutions are, I'd appreciate hearing it here.

  Read the article

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• Exchange 2003 SP2 and Windows Server 2008 R2 Domain Controllers

  - by Brian

  I'm looking at adding two Windows Server 2008 R2 Domain Controllers into our Windows Server 2003 domain to support our Exchange 2003 SP2 server and replace a retiring Windows Server 2003 Server. Our Domain and Forest functional levels are currently Windows Server 2003, which supports domain controller operating systems (Windows Server 2008 R2, Windows Server 2008 and Windows Server 2003) according to the "Appendix of Functional Level Features" on Technet . So there should not be an issue other than running adprep /forestprep and adprep /domain.... right!? But, according to the Exchange Server Supportability Matrix, Windows Server 2008 R2 Active Directory Servers are not supported as global catalog servers or domain controllers in a Exchange 2003 SP2 environment!!!??? This was a shock to me... How can Windows Server 2008 R2 be a DC for a Windows Server 2003 domain and forest, but not communicate with an Exchange 2003 SP2 server? Hopefully, I'm not the first to see this issue (or maybe I am), but I know a lot of Exchange 2003 admins will not be happy if there is not a work around... or is Microsoft trying to push everyone automatically to Exchange 2010...

  Read the article

• How/Where do you install Console2 on Windows 7

  - by Brian Boatright

  I downloaded the source and binaries from http://sourceforge.net/projects/console/files/ In the binaries help file it makes reference to a setup file but there is none. The list of files included in the Console-2.00b145-Beta.zip is: Microsoft.VC90.CRT (folder) console.chm Console.exe console.xml ConsoleHook.dll FreeImage.dll FreeImagePlus.dll How do I setup or place the files for Console2 on Windows 7?

  Read the article

• T38modem manuals?

  - by Brian Postow

  Are there any T38modem users here? I'm trying to figure out how to call T38modem with SIP. I've got everything except the --route option for receiving. I know my own phone number, but I am not sure how to set it up. Currently, I have: --route "modem:0.*"="sip:<dn>@64.136.174.30" --route "modem:1.*=sip:[email protected]" I've also tried: --route "modem:*.*"="sip:<dn>@64.136.174.30" --route"sip:*@74.94.184.154"="modem:<dn>@127.0.0.1" what amI doing wrong? And where (other than t38modem --help) can I find some documentation on how to use it? thanks.

  Read the article

• "Recursive" Wildcard DNS for Amazon Route 53

  - by Brian

  The title of the question might be misleading because I'm not an expert and I'm trying to learn the proper terminology. That being said, I'm wondering if it's possible to setup a wildcard DNS record for any number of dot separation in domain names and have them all point to the network root. This is for WordPress multisite, users will have the option of choosing a mapped domain name, I want to configure my DNS so that both mysite.co.uk.network.com and mysite.com.network.com are valid (I realize this is a but ugly, but WordPress multisite requires that each site have a unique site_url and I'd prefer to preserve the period-delimited appearance if it's possible).

  Read the article

• Project Server 2007 install issue - ProjectEventService won't start

  - by Brian Meinertz

  Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• Can't Remote into Windows Server

  - by Brian

  Hello, I have a Dell server wired into the router. I was able to connect to it with my laptop (laptop is wireless) before my router died. My verizon router went kaput, and I got everything else back up and running on the wireless network other than the remoting in feature, even though I can access the server through windows explorer just fine. Any ideas why? What do I need to check? UPDATE: Interesting scenario, Network Discovery is off; I turn it on and save, but for some reason, even after that, network discovery is turning itself off... no idea why that is happening? Thanks.

  Read the article

• How does firefox chose which plugin to use?

  - by Brian Postow

  I have written a plugin which allows the user to view multi-page TIFF images within firefox. The problem is that Quicktime also thinks it can view TIFF images. How does Firefox chose which one gets used? through trial and error I've determined that: Sometimes, my plugin (Accel VIewTIFF) just runs, and everyone is happy. Sometimes I need to disable Quicktime in the Add-ons window. Sometimes I need to remove the QuickTime plugin files from the / Library/Internet Plug-ins folder (I'm on a mac) Sometimes I can put QuickTime BACK after having successfully run Accel ViewTIFF. I've yet to figure out when (if ever) each step is necessary. Please help me escape the cargo cult! (or at least point me to the right place in a manual.) thanks.

  Read the article

• Adding Hyper-V Role Errors

  - by Brian

  Hello, I have a Win 2008 R2 Data Center machine, and when I added the Hyper-V role, I got the following errors: 'Hypervisor' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role. Hyper-V launch failed; Either VMX not present or not enabled in BIOS. ANy help would be appreciated as I am a n00b to the server world. Thanks.

  Read the article

• Why does this Robocopy command make files hidden and how can I unhide them?

  - by Brian Dant

  I am trying to make a backup to an external HD using Robocopy. I am wondering why it makes the destination directory hidden and subsequently why I can't unhide it? Note: I'm new to the Windows command line. This is the first command I have ever passed. The command I used is: Robocopy D:\ I:\destination-directory /E /R:0 /DCOPY:T The backup worked fine, but it made the destination directory hidden. Then I tried to unhide the directory with the following command: ATTRIB -H "I:\destination-directory" /S /D and the output is: Not resetting system file -- I:\destination-directory So, Why does this Robocopy command hide the destination directory? What can I do to unhide this directory? I would like to use the command line to do this.

  Read the article

• Best City in Australia for Dedicated Hosting [closed]

  - by Brian Stinson

  We are looking to duplicate a copy of our database and application servers to serve our customers in Australia. We are looking for a well connected datacenter providing dedicated hosting (full machine rental) to take database updates and the like from our main site in Boston, MA. Which general location/city in Australia is best connected? East Coast? West Coast? If you have individual datacenter recommendations those are helpful as well.

  Read the article

• Microsoft Office 2010 start page numbering on page 5

  - by Brian Byrne

  This is driving me absolutely insane. I want to start the page numbering on page 5 and for it to continue to the end of the document. I've tried using page/section breaks but that didn't work. I've also tried pressing ctrl + F9 while in the footer and adding it in the format { if{ page } < 5 "{ page *roman }" "{ page }" } but that doesn't work either. Does anyone have any ideas? I've been trying to fix this for the past hour.

  Read the article

• Linked vSphere servers preventing cloning?

  - by brian

  I've currently got a pair of vSphere5 standard servers (physical, not VAs) managing about a hundred ESX 4.1 and 5 hosts in two different physical and logical datacenters. With our last purchase, we bought another vSphere license for the new vS server. I unmanaged all the ESX servers in one datacenter and added them to new vSphere server. Our previous single-vS-server layout used to be: -vSphere1 --Datacenter1 (where the physical ESX host was located) ---Folder ----ESX server1 --Datacenter2 ---Folder ----ESX server2 Now it looks like -vSphere1 --Datacenter1 ---Folder ----ESX server1 -vSphere2 (new vSphere server) --Datacenter2 ---Folder ----ESX server2 ESX server2 was removed from vSphere1's inventory and added to vSphere2's, so it is now managed by vSphere2. This is nice and all, as no vSphere <-- ESX management traffic leaves the physical datacenter, except for one huge oversight: when I go to clone a VM, the opposite vSphere server (and thus other datacenter) does not show up in the list on the first page of the wizard. Is this a bug, a license limitation, or is it just simply not possible to clone a VM from an ESX box managed by one vS server to another ESX box managed by a /different/ vS server?

  Read the article

• Filezilla FTP Server Ports - Active Connections

  - by Brian Webster

  I have been obtaining errors like below because I did not specify enough ports for the active FTP connections. Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection.Error: Failed to retrieve directory listing Things seem to work nicely with limited ports, but when I perform actions that cause very rapid short-lived connections, something like 20-30% of the connections drop with the error above. I started with ports 50000-50100. When I opened up to 50000-52000, the errors disappeared. Why did this fix my problem? I would like to understand why adding ports fixed it. I have a suspicion that ports become "locked down" for a few moments surrounding when they are used in a connection. If connections are happening so rapidly, there may be no ports available, thus the above error. Can anybody confirm?

  Read the article

• Network authentication + roaming home directory - which technology should I look into using?

  - by Brian

  I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >