Search Results

Search found 1337 results on 54 pages for 'capacity estimation'.

Page 17/54 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

    - by leemes
    I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

    Read the article

  • Agile Development - Developer Qualification required, and Disadvantages of

    - by Everyone
    We have been using Agile on a project for 3 years now. Albeit I was new to scrum, it came to me easily enough. However we found it quite difficult to break any freshers into the scrumming process. One reason may have been that estimation for the future requires domain and technology depth that freshers lack. What, if any is the necessary qualification for a developer be part of an Agile team? What, in your experience, are drawbacks to Agile?

    Read the article

  • Agile Development - Developer Qualification required, and Disadvantages of

    - by Everyone
    We have been using Agile on a project for 3 years now. Albeit I was new to scrum, it came to me easily enough. However we found it quite difficult to break any freshers into the scrumming process. One reason may have been that estimation for the future requires domain and technology depth that freshers lack. What, if any is the necessary qualification for a developer be part of an Agile team? What, in your experience, are drawbacks to Agile?

    Read the article

  • Financial applications on GPGPU

    - by CUDA-dev
    I want to know what sort of financial applications can be implemented using a GPGPU. I'm aware of Option pricing/ Stock price estimation using Monte Carlo simulation on GPGPU using CUDA. Can someone enumerate the various possibilities of utilizing GPGPU for any application in Finance domain,

    Read the article

  • How to rotate 3D axis(XYZ) using Yaw,Pitch,Roll angles in Opengl

    - by user3639338
    I am working Pose estimation with capturing from camera with Opencv. Now I had three angle(Yaw,Pitch,Roll) from each frame(Head) using my code.How to rotate 3D axis(XYZ) those three angle using opengl ? I draw 3D axis using opengl. I have Problem with rotate this axis for returning each frame(Head) using VideoCapture camera input from my code.I cant rotate continuously using returning three angle my code.

    Read the article

  • Problem with RAID5 (mdadm) - disk detached

    - by poscaman
    Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 Apr 18 16:53:05 Server kernel: [4487878.816059] dhfis 0x1 dmafis 0x1 sdbfis 0x0 Apr 18 16:53:05 Server kernel: [4487878.816093] ata4: ATA_REG 0x40 ERR_REG 0x0 Apr 18 16:53:05 Server kernel: [4487878.816108] ata4: tag : dhfis dmafis sdbfis sacitve Apr 18 16:53:05 Server kernel: [4487878.816125] ata4: tag 0x0: 1 1 0 1 Apr 18 16:53:05 Server kernel: [4487878.816150] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen Apr 18 16:53:05 Server kernel: [4487878.816178] ata4.00: failed command: WRITE FPDMA QUEUED Apr 18 16:53:05 Server kernel: [4487878.816199] ata4.00: cmd 61/08:00:00:88:e0/00:00:e8:00:00/40 tag 0 ncq 4096 out Apr 18 16:53:05 Server kernel: [4487878.816200] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Apr 18 16:53:05 Server kernel: [4487878.816253] ata4.00: status: { DRDY } Apr 18 16:53:05 Server kernel: [4487878.816272] ata4: hard resetting link Apr 18 16:53:05 Server kernel: [4487878.816274] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:06 Server kernel: [4487879.676029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:07 Server kernel: [4487880.416749] ata4.00: n_sectors mismatch 3907029168 != 268435455 Apr 18 16:53:07 Server kernel: [4487880.416752] ata4.00: revalidation failed (errno=-19) Apr 18 16:53:07 Server kernel: [4487880.416773] ata4.00: limiting speed to UDMA/133:PIO2 Apr 18 16:53:11 Server kernel: [4487884.676024] ata4: hard resetting link Apr 18 16:53:11 Server kernel: [4487884.676027] ata4: nv: skipping hardreset on occupied port Apr 18 16:53:12 Server kernel: [4487885.144032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:12 Server kernel: [4487885.240185] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) Apr 18 16:53:12 Server kernel: [4487885.240190] ata4.00: revalidation failed (errno=-5) Apr 18 16:53:12 Server kernel: [4487885.240210] ata4.00: disabled Apr 18 16:53:17 Server kernel: [4487890.144023] ata4: hard resetting link Apr 18 16:53:17 Server kernel: [4487891.024033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 18 16:53:17 Server kernel: [4487891.033357] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.033360] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32) Apr 18 16:53:17 Server kernel: [4487891.048347] ata4.00: configured for UDMA/133 Apr 18 16:53:17 Server kernel: [4487891.048361] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Apr 18 16:53:17 Server kernel: [4487891.048365] sd 3:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] Apr 18 16:53:17 Server kernel: [4487891.048369] Descriptor sense data with sense descriptors (in hex): Apr 18 16:53:17 Server kernel: [4487891.048371] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048378] 00 00 00 00 Apr 18 16:53:17 Server kernel: [4487891.048382] sd 3:0:0:0: [sdc] Add. Sense: No additional sense information Apr 18 16:53:17 Server kernel: [4487891.048385] sd 3:0:0:0: [sdc] CDB: Write(10): 2a 00 e8 e0 88 00 00 00 08 00 Apr 18 16:53:17 Server kernel: [4487891.048393] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048420] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048440] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048458] end_request: I/O error, dev sdc, sector 3907028992 Apr 18 16:53:17 Server kernel: [4487891.048477] md: super_written gets error=-5, uptodate=0 Apr 18 16:53:17 Server kernel: [4487891.048482] raid5: Disk failure on sdc, disabling device. Apr 18 16:53:17 Server kernel: [4487891.048483] raid5: Operation continuing on 3 devices. Apr 18 16:53:17 Server kernel: [4487891.048525] ata4: EH complete Apr 18 16:53:17 Server kernel: [4487891.048554] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048576] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048596] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048615] sd 3:0:0:0: [sdc] READ CAPACITY(16) failed Apr 18 16:53:17 Server kernel: [4487891.048617] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048620] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048624] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048643] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048663] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048681] sd 3:0:0:0: [sdc] READ CAPACITY failed Apr 18 16:53:17 Server kernel: [4487891.048683] sd 3:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Apr 18 16:53:17 Server kernel: [4487891.048685] sd 3:0:0:0: [sdc] Sense not available. Apr 18 16:53:17 Server kernel: [4487891.048689] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048709] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048800] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.048860] sd 3:0:0:0: rejecting I/O to offline device Apr 18 16:53:17 Server kernel: [4487891.049028] sd 3:0:0:0: [sdc] Asking for cache data failed Apr 18 16:53:17 Server kernel: [4487891.049048] sd 3:0:0:0: [sdc] Assuming drive cache: write through Apr 18 16:53:17 Server kernel: [4487891.049071] sdc: detected capacity change from 2000398934016 to 0 Apr 18 16:53:17 Server kernel: [4487891.049080] ata4.00: detaching (SCSI 3:0:0:0) Apr 18 16:53:18 Server kernel: [4487891.061149] sd 3:0:0:0: [sdc] Stopping disk Apr 18 16:53:18 Server kernel: [4487891.485492] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.485496] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.485500] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.485502] disk 1, o:0, dev:sdc Apr 18 16:53:18 Server kernel: [4487891.485504] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.485506] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.497014] RAID5 conf printout: Apr 18 16:53:18 Server kernel: [4487891.497016] --- rd:4 wd:3 Apr 18 16:53:18 Server kernel: [4487891.497018] disk 0, o:1, dev:sdb Apr 18 16:53:18 Server kernel: [4487891.497019] disk 2, o:1, dev:sdd Apr 18 16:53:18 Server kernel: [4487891.497021] disk 3, o:1, dev:sde Apr 18 16:53:18 Server kernel: [4487891.838719] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5 Apr 18 16:53:18 Server kernel: [4487891.838886] sd 3:0:0:0: Attached scsi generic sg3 type 0 Apr 18 16:53:18 Server kernel: [4487891.838911] sd 3:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) Apr 18 16:53:18 Server kernel: [4487891.838964] sd 3:0:0:0: [sdf] Write Protect is off Apr 18 16:53:18 Server kernel: [4487891.838967] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Apr 18 16:53:18 Server kernel: [4487891.838988] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 18 16:53:20 Server kernel: [4487891.839147] sdf: unknown partition table Apr 18 16:53:20 Server kernel: [4487893.130026] sd 3:0:0:0: [sdf] Attached SCSI disk Right now, i'm unable to do anything on /dev/sdc. Is there any way to try to re-attach it? I don't want to power-down the server unless absolutely necessary System: Debian Stable 2.6.32-5-amd64 mdadm version 3.1.4-1+8efb9d1 cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sdb[0] sdc[4](F) sde[3] sdd[2] 5860543488 blocks level 5, 64k chunk, algorithm 2 [4/3] [U_UU] unused devices: <none> mdadm --examine --scan ARRAY /dev/md0 UUID=1a7744b5:912ec7af:f82a9565:e3b453b4

    Read the article

  • How do I get a Dane-Elec mp3/mp4 player working?

    - by user40432
    My MP3/MP4 does not plug-in and play and therefore I can not transfer any file to the MP3/MP4 dane-elec music my touch or only dane-elec with 8 gb in memory and perhapses model zt1 with radio,..and microsdhc card slot following the above link the mp3/mp4 is there and it is MP3 Player: TOUCH MY MUSIC and the complete information is on this site http://www.danedigital.com/8-Music-Media-Players/2-music-touch.html as the Technical Specifications MP3 Player: TOUCH MY MUSIC The Mp4 player has a very classy. It allows its users to play music and view photos and video. His fluent interface, its touch-pad, his radio and RDS Micro SDHC reader makes him a very complete device will become the ideal musical companion. ubuntu i am with is ubuntu 11.10 kernel 3.0.0-14-generic the latest I tried to install many applications but nothing worked. With disk utility I can see that Ubuntu can recognize something, that as a peripheral device named rockchip usbdisk user and rockchip usbdisk sd, and i can plug and play other devices, and only this mp3/mp4 do not connect to the computer with ubuntu and the device as no problem working disconnected to computer I try to see if work on Windows and it does! I can see the device and transfer files to the MP3/MP4 dane-elec folder device and use FAT32. So why can not do on Ubuntu!? What can I do and why does not work on Ubuntu? What is wrong with it? Here are the logs: Jan 4 17:27:34 a-ubuntu kernel: [ 141.948863] init: apport pre-start process (1970) terminated with status 1 Jan 4 17:27:34 a-ubuntu kernel: [ 141.963202] init: apport post-stop process (1994) terminated with status 1 Jan 4 17:30:02 a-ubuntu kernel: [ 289.564049] usb 2-4: new high speed USB device number 3 using ehci_hcd Jan 4 17:30:02 a-ubuntu kernel: [ 289.988706] usbcore: registered new interface driver uas Jan 4 17:30:02 a-ubuntu kernel: [ 289.992056] Initializing USB Mass Storage driver... Jan 4 17:30:02 a-ubuntu kernel: [ 289.992272] scsi6 : usb-storage 2-4:1.0 Jan 4 17:30:02 a-ubuntu kernel: [ 289.993082] usbcore: registered new interface driver usb-storage Jan 4 17:30:02 a-ubuntu kernel: [ 289.993088] USB Mass Storage support registered. Jan 4 17:30:03 a-ubuntu kernel: [ 290.996887] scsi 6:0:0:0: Direct-Access RockChip USBDISK User 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997372] scsi 6:0:0:1: Direct-Access RockChip USBDISK SD 1.00 PQ: 0 ANSI: 0 Jan 4 17:30:03 a-ubuntu kernel: [ 290.997478] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002712] scsi: killing requests for dead queue Jan 4 17:30:03 a-ubuntu kernel: [ 291.002880] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.016249] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.032252] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.048182] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060178] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.060357] scsi: killing requests for dead queue Jan 4 17:30:04 a-ubuntu kernel: [ 291.080381] sd 6:0:0:0: Attached scsi generic sg2 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.080646] sd 6:0:0:1: Attached scsi generic sg3 type 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.088381] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:04 a-ubuntu kernel: [ 291.088988] sd 6:0:0:1: [sdc] Attached SCSI removable disk Jan 4 17:30:04 a-ubuntu kernel: [ 291.200050] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.448044] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.696055] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:04 a-ubuntu kernel: [ 291.832046] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled Jan 4 17:30:04 a-ubuntu kernel: [ 291.832994] sd 6:0:0:0: [sdb] Asking for cache data failed Jan 4 17:30:04 a-ubuntu kernel: [ 291.833001] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:30:04 a-ubuntu kernel: [ 291.834378] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:30:04 a-ubuntu kernel: [ 291.835367] sd 6:0:0:0: [sdb] Attached SCSI removable disk Jan 4 17:30:06 a-ubuntu kernel: [ 293.004741] sd 6:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB) Jan 4 17:30:06 a-ubuntu kernel: [ 293.116051] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:21 a-ubuntu kernel: [ 308.228043] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.444072] usb 2-4: device descriptor read/64, error -110 Jan 4 17:30:36 a-ubuntu kernel: [ 323.660047] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:30:51 a-ubuntu kernel: [ 338.772085] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:06 a-ubuntu kernel: [ 353.988064] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:07 a-ubuntu kernel: [ 354.204058] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:12 a-ubuntu kernel: [ 359.224115] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.344136] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:17 a-ubuntu kernel: [ 364.560037] usb 2-4: reset high speed USB device number 3 using ehci_hcd Jan 4 17:31:22 a-ubuntu kernel: [ 369.580132] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.700126] usb 2-4: device descriptor read/8, error -110 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804121] usb 2-4: USB disconnect, device number 3 Jan 4 17:31:27 a-ubuntu kernel: [ 374.804518] sd 6:0:0:0: Device offlined - not ready after error recovery Jan 4 17:31:27 a-ubuntu kernel: [ 374.804600] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804606] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804693] sd 6:0:0:0: [sdb] READ CAPACITY failed Jan 4 17:31:27 a-ubuntu kernel: [ 374.804698] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jan 4 17:31:27 a-ubuntu kernel: [ 374.804704] sd 6:0:0:0: [sdb] Sense not available. Jan 4 17:31:27 a-ubuntu kernel: [ 374.804744] sd 6:0:0:0: [sdb] No Caching mode page present Jan 4 17:31:27 a-ubuntu kernel: [ 374.804748] sd 6:0:0:0: [sdb] Assuming drive cache: write through Jan 4 17:31:27 a-ubuntu kernel: [ 374.804754] sdb: detected capacity change from 8199864320 to 0 Jan 4 17:31:27 a-ubuntu kernel: [ 374.820273] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.852240] scsi: killing requests for dead queue Jan 4 17:31:27 a-ubuntu kernel: [ 374.980054] usb 2-4: new high speed USB device number 4 using ehci_hcd Jan 4 17:31:43 a-ubuntu kernel: [ 390.092059] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.308070] usb 2-4: device descriptor read/64, error -110 Jan 4 17:31:58 a-ubuntu kernel: [ 405.524078] usb 2-4: new high speed USB device number 5 using ehci_hcd and the other post is: http://pastebin.ubuntu.com/792915/ and the other bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x04f2 Chicony Electronics Co., Ltd idProduct 0xb008 USB 2.0 Camera bcdDevice 93.27 iManufacturer 2 Chicony Electronics Co., Ltd. iProduct 1 Chicony USB 2.0 Camera iSerial 3 SN0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 565 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 1 Chicony USB 2.0 Camera Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 1 Chicony USB 2.0 Camera VideoControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 77 dwClockFrequency 15.000000MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 4 iTerminal 0 VideoControl Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 4 guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016} bNumControl 1 bNrPins 1 baSourceID( 0) 3 bControlSize 1 bmControls( 0) 0x01 iExtension 0 VideoControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Camera Sensor bAssocTerminal 0 iTerminal 0 wObjectiveFocalLengthMin 0 wObjectiveFocalLengthMax 0 wOcularFocalLength 0 bControlSize 3 bmControls 0x00000000 VideoControl Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 5 (PROCESSING_UNIT) Warning: Descriptor too short bUnitID 3 bSourceID 1 wMaxMultiplier 0 bControlSize 2 bmControls 0x0000053f Brightness Contrast Hue Saturation Sharpness Gamma Backlight Compensation Power Line Frequency iProcessing 0 bmVideoStandards 0x a NTSC - 525/60 SECAM - 625/50 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 6 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 VideoStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 1 (INPUT_HEADER) bNumFormats 1 wTotalLength 345 bEndPointAddress 129 bmInfo 0 bTerminalLink 2 bStillCaptureMethod 0 bTriggerSupport 1 bTriggerUsage 0 bControlSize 1 bmaControls( 0) 27 VideoStreaming Interface Descriptor: bLength 27 bDescriptorType 36 bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED) bFormatIndex 1 bNumFrameDescriptors 7 guidFormat {59555932-0000-1000-8000-00aa00389b71} bBitsPerPixel 16 bDefaultFrameIndex 1 bAspectRatioX 0 bAspectRatioY 0 bmInterlaceFlags 0x00 Interlaced stream or variable: No Fields per frame: 2 fields Field 1 first: No Field pattern: Field 1 only bCopyProtect 0 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 640 wHeight 480 dwMinBitRate 614400 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 614400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 352 wHeight 288 dwMinBitRate 202752 dwMaxBitRate 6082560 dwMaxVideoFrameBufferSize 202752 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 3 bmCapabilities 0x00 Still image unsupported wWidth 320 wHeight 240 dwMinBitRate 153600 dwMaxBitRate 4608000 dwMaxVideoFrameBufferSize 153600 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 4 bmCapabilities 0x00 Still image unsupported wWidth 176 wHeight 144 dwMinBitRate 50688 dwMaxBitRate 1520640 dwMaxVideoFrameBufferSize 50688 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 46 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 5 bmCapabilities 0x00 Still image unsupported wWidth 160 wHeight 120 dwMinBitRate 38400 dwMaxBitRate 1152000 dwMaxVideoFrameBufferSize 38400 dwDefaultFrameInterval 333333 bFrameIntervalType 5 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 500000 dwFrameInterval( 2) 666666 dwFrameInterval( 3) 1000000 dwFrameInterval( 4) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 6 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 800 dwMinBitRate 2048000 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 2048000 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 7 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 1024 dwMinBitRate 2621440 dwMaxBitRate 23592960 dwMaxVideoFrameBufferSize 2621440 dwDefaultFrameInterval 1333333 bFrameIntervalType 2 dwFrameInterval( 0) 1333333 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 13 (COLORFORMAT) bColorPrimaries 1 (BT.709,sRGB) bTransferCharacteristics 1 (BT.709) bMatrixCoefficients 4 (SMPTE 170M (BT.601)) Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0080 1x 128 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0100 1x 256 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0320 1x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0b20 2x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x1320 3x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x13e8 3x 1000 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 006 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04d9 Holtek Semiconductor, Inc. idProduct 0x1503 Shortboard Lefty bcdDevice 3.10 iManufacturer 1 iProduct 2 USB Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 62 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 101 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered)

    Read the article

  • Oracle pl\sql question for my homework in oracle 11G class [migrated]

    - by Bjolds
    I am new to oracle 11G programming and i have run into a tough situation with pl\sql funtions and automation. I ame unsure how to create the function for the automation of Registration system for a College registration system. Here is what i want to do. I want to automate the registrations system so that it automaticly registers students. Then I want a procedure to automate the grading system. I have included the code that i am written to make most of this assignment work which it does but unsure how to incorporate Pl\SQL automated fuctions for the registrations system, and the grading system. So Any help or Ideas I would greatly appreciate please. set Linesize 250 set pagesize 150 drop table student; drop table faculty; drop table Course; drop table Section; drop table location; DROP TABLE courseInstructor; DROP TABLE Registration; DROP TABLE grade; create table student( studentid number(10), Lastname varchar2(20), Firstname Varchar2(20), MI Char(1), address Varchar2(20), city Varchar2(20), state Char(2), zip Varchar2(10), HomePhone Varchar2(10), Workphone Varchar2(10), DOB Date, Pin VARCHAR2(10), Status Char(1)); ALTER TABLE Student Add Constraint Student_StudentID_pk Primary Key (studentID); Insert into student values (1,'xxxxxxxx','xxxxxxxxxx','x','xxxxxxxxxxxxxxx','Columbus','oh','44159','xxx-xxx-xxxx','xxx-xxx-xxxx','06-Mar-1957','1211','c'); create table faculty( FacultyID Number(10), FirstName Varchar2(20), Lastname Varchar2(20), MI Char(1), workphone Varchar2(10), CellPhone Varchar2(10), Rank Varchar2(20), Experience Varchar2(10), Status Char(1)); ALTER TABLE Faculty ADD Constraint Faculty_facultyId_PK PRIMARY KEY (FacultyID); insert into faculty values (1,'xxx','xxxxxxxxxxxx',xxx-xxx-xxxx','xxx-xxx-xxxx','professor','20','f'); create table Course( CourseId number(10), CourseNumber Varchar2(20), CourseName Varchar(20), Description Varchar(20), CreditHours Number(4), Status Char(1)); ALTER TABLE Course ADD Constraint Course_CourseID_pk PRIMARY KEY(CourseID); insert into course values (1,'cit 100','computer concepts','introduction to PCs','3.0','o'); insert into course values (2,'cit 101','Database Program','Database Programming','4.0','o'); insert into course values (3,'Math 101','Algebra I','Algebra I Concepts','5.0','o'); insert into course values (4,'cit 102a','Pc applications','Aplications 1','3.0','o'); insert into course values (5,'cit 102b','pc applications','applications 2','3.0','o'); insert into course values (6,'cit 102c','pc applications','applications 3','3.0','o'); insert into course values (7,'cit 103','computer concepts','introduction systems','3.0','c'); insert into course values (8,'cit 110','Unified language','UML design','3.0','o'); insert into course values (9,'cit 165','cobol','cobol programming','3.0','o'); insert into course values (10,'cit 167','C++ Programming 1','c++ programming','4.0','o'); insert into course values (11,'cit 231','Expert Excel','spreadsheet apps','3.0','o'); insert into course values (12,'cit 233','expert Access','database devel.','3.0','o'); insert into course values (13,'cit 169','Java Programming I','Java Programming I','3.0','o'); insert into course values (14,'cit 263','Visual Basic','Visual Basic Prog','3.0','o'); insert into course values (15,'cit 275','system analysis 2','System Analysis 2','3.0','o'); create table Section( SectionID Number(10), CourseId Number(10), SectionNumber VarChar2(10), Days Varchar2(10), StartTime Date, EndTime Date, LocationID Number(10), SeatAvailable Number(3), Status Char(1)); ALTER TABLE Section ADD Constraint Section_SectionID_PK PRIMARY KEY(SectionID); insert into section values (1,1,'18977','r','21-Sep-2011','10-Dec-2011','1','89','o'); create table Location( LocationId Number(10), Building Varchar2(20), Room Varchar2(5), Capacity Number(5), Satus Char(1)); ALTER TABLE Location ADD Constraint Location_LocationID_pk PRIMARY KEY (LocationID); insert into Location values (1,'Clevleand Hall','cl209','35','o'); insert into Location values (2,'Toledo Circle','tc211','45','o'); insert into Location values (3,'Akron Square','as154','65','o'); insert into Location values (4,'Cincy Hall','ch100','45','o'); insert into Location values (5,'Springfield Dome','SD','35','o'); insert into Location values (6,'Dayton Dorm','dd225','25','o'); insert into Location values (7,'Columbus Hall','CB354','15','o'); insert into Location values (8,'Cleveland Hall','cl204','85','o'); insert into Location values (9,'Toledo Circle','tc103','75','o'); insert into Location values (10,'Akron Square','as201','46','o'); insert into Location values (11,'Cincy Hall','ch301','73','o'); insert into Location values (12,'Dayton Dorm','dd245','57','o'); insert into Location values (13,'Springfield Dome','SD','65','o'); insert into Location values (14,'Cleveland Hall','cl241','10','o'); insert into Location values (15,'Toledo Circle','tc211','27','o'); insert into Location values (16,'Akron Square','as311','28','o'); insert into Location values (17,'Cincy Hall','ch415','73','o'); insert into Location values (18,'Toledo Circle','tc111','67','o'); insert into Location values (19,'Springfield Dome','SD','69','o'); insert into Location values (20,'Dayton Dorm','dd211','45','o'); Alter Table Student Add Constraint student_Zip_CK Check(Rtrim (Zip,'1234567890-') is null); Alter Table Student ADD Constraint Student_Status_CK Check(Status In('c','t')); Alter Table Student ADD Constraint Student_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Alter Table Student Modify pin not Null; Alter table Faculty Add Constraint Faculty_Status_CK Check(Status In('f','a','i')); Alter table Faculty ADD Constraint Faculty_Rank_CK Check(Rank In ('professor','doctor','instructor','assistant','tenure')); Alter table Faculty ADD Constraint Faculty_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Update Section Set Starttime = To_date('09-21-2011 6:00 PM', 'mm-dd-yyyy hh:mi pm'); Update Section Set Endtime = To_date('12-10-2011 9:50 PM', 'mm-dd-yyyy hh:mi pm'); alter table Section Add Constraint StartTime_Status_CK Check (starttime < Endtime); Alter Table Section Add Constraint Section_StartTime_ck check (StartTime < EndTime); Alter Table Section ADD Constraint Section_CourseId_FK FOREIGN KEY (CourseID) References Course(CourseId); Alter Table Section ADD Constraint Section_LocationID_FK FOREIGN KEY (LocationID) References Location (LocationId); Alter Table Section ADD Constraint Section_Days_CK Check(RTRIM(Days,'mtwrfsu')IS Null); update section set seatavailable = '99'; Alter Table Section ADD Constraint Section_SeatsAvailable_CK Check (SeatAvailable < 100); Alter Table Course Add Constraint Course_CreditHours_ck check(CreditHours < = 6.0); update location set capacity = '99'; Alter Table Location Add Constraint Location_Capacity_CK Check(Capacity < 100); Create Table Registration ( StudentID Number(10), SectionID Number(10), Constraint Registration_pk Primary key (studentId, Sectionid)); Insert into registration values (1, 2); Insert into Registration values (2, 3); Insert into registration values (3, 4); Insert into registration values (4, 5); Insert into registration values (5, 6); Insert into registration values (6, 7); Insert into registration values (7, 8); Insert into registration values (8, 9); insert into registration values (9, 10); insert into registration values (10, 11); insert into registration values (9, 12); insert into registration values (8, 13); insert into registration values (7, 14); insert into registration values (6, 15); insert into registration values (5, 17); insert into registration values (4, 18); insert into registration values (3, 19); insert into registration values (2, 20); insert into registration values (1, 21); insert into registration values (2, 22); insert into registration values (3, 23); insert into registration values (4, 24); insert into registration values (5, 25); Insert into registration values (6, 24); insert into registration values (7, 23); insert into registration values (8, 22); insert into registration values (9, 21); insert into registration values (10, 20); insert into registration values (9, 19); insert into registration values (8, 17); Create Table courseInstructor( FacultyID Number(10), SectionID Number(10), Constraint CourseInstructor_pk Primary key (FacultyId, SectionID)); insert into courseInstructor values (1, 1); insert into courseInstructor values (2, 2); insert into courseInstructor values (3, 3); insert into courseInstructor values (4, 4); insert into courseInstructor values (5, 5); insert into courseInstructor values (5, 6); insert into courseInstructor values (4, 7); insert into courseInstructor values (3, 8); insert into courseInstructor values (2, 9); insert into courseInstructor values (1, 10); insert into courseInstructor values (5, 11); insert into courseInstructor values (4, 12); insert into courseInstructor values (3, 13); insert into courseInstructor values (2, 14); insert into courseInstructor values (1, 15); Create table grade( StudentID Number(10), SectionID Number(10), Grade Varchar2(1), Constraint grade_pk Primary key (StudentID, SectionID)); CREATE OR REPLACE TRIGGER TR_CreateGrade AFTER INSERT ON Registration FOR EACH ROW BEGIN INSERT INTO grade (SectionID,StudentID,Grade) VALUES(:New.SectionID,:New.StudentID,NULL); END TR_createGrade; / CREATE OR REPLACE FORCE VIEW V_reg_student_course AS SELECT Registration.StudentID, student.LastName, student.FirstName, course.CourseName, Registration.SectionID, course.CreditHours, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM registration, student, section, course, location WHERE registration.StudentID = student.StudentID AND registration.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; CREATE OR REPLACE FORCE VIEW V_teacher_to_course AS SELECT courseInstructor.FacultyID, faculty.FirstName, faculty.LastName, courseInstructor.SectionID, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM courseInstructor, faculty, section, course, location WHERE courseInstructor.FacultyID = faculty.FacultyID AND courseInstructor.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; SELECT * FROM V_reg_student_course; SELECT * FROM V_teacher_to_course;

    Read the article

  • DocumentDB - Another Azure NoSQL Storage Service

    - by Shaun
    Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/08/25/documentdb---another-azure-nosql-storage-service.aspxMicrosoft just released a bunch of new features for Azure on 22nd and one of them I was interested in most is DocumentDB, a document NoSQL database service on the cloud.   Quick Look at DocumentDB We can try DocumentDB from the new azure preview portal. Just click the NEW button and select the item named DocumentDB to create a new account. Specify the name of the DocumentDB, which will be the endpoint we are going to use to connect later. Select the capacity unit, resource group and subscription. In resource group section we can select which region our DocumentDB will be located. Same as other azure services select the same location with your consumers of the DocumentDB, for example the website, web services, etc.. After several minutes the DocumentDB will be ready. Click the KEYS button we can find the URI and primary key, which will be used when connecting. Now let's open Visual Studio and try to use the DocumentDB we had just created. Create a new console application and install the DocumentDB .NET client library from NuGet with the keyword "DocumentDB". You need to select "Include Prerelase" in NuGet Package Manager window since this library was not yet released. Next we will create a new database and document collection under our DocumentDB account. The code below created an instance of DocumentClient with the URI and primary key we just copied from azure portal, and create a database and collection. And it also prints the document and collection link string which will be used later to insert and query documents. 1: static void Main(string[] args) 2: { 3: var endpoint = new Uri("https://shx.documents.azure.com:443/"); 4: var key = "LU2NoyS2fH0131TGxtBE4DW/CjHQBzAaUx/mbuJ1X77C4FWUG129wWk2oyS2odgkFO2Xdif9/ZddintQicF+lA=="; 5:  6: var client = new DocumentClient(endpoint, key); 7: Run(client).Wait(); 8:  9: Console.WriteLine("done"); 10: Console.ReadKey(); 11: } 12:  13: static async Task Run(DocumentClient client) 14: { 15:  16: var database = new Database() { Id = "testdb" }; 17: database = await client.CreateDatabaseAsync(database); 18: Console.WriteLine("database link = {0}", database.SelfLink); 19:  20: var collection = new DocumentCollection() { Id = "testcol" }; 21: collection = await client.CreateDocumentCollectionAsync(database.SelfLink, collection); 22: Console.WriteLine("collection link = {0}", collection.SelfLink); 23: } Below is the result from the console window. We need to copy the collection link string for future usage. Now if we back to the portal we will find a database was listed with the name we specified in the code. Next we will insert a document into the database and collection we had just created. In the code below we pasted the collection link which copied in previous step, create a dynamic object with several properties defined. As you can see we can add some normal properties contains string, integer, we can also add complex property for example an array, a dictionary and an object reference, unless they can be serialized to JSON. 1: static void Main(string[] args) 2: { 3: var endpoint = new Uri("https://shx.documents.azure.com:443/"); 4: var key = "LU2NoyS2fH0131TGxtBE4DW/CjHQBzAaUx/mbuJ1X77C4FWUG129wWk2oyS2odgkFO2Xdif9/ZddintQicF+lA=="; 5:  6: var client = new DocumentClient(endpoint, key); 7:  8: // collection link pasted from the result in previous demo 9: var collectionLink = "dbs/AAk3AA==/colls/AAk3AP6oFgA=/"; 10:  11: // document we are going to insert to database 12: dynamic doc = new ExpandoObject(); 13: doc.firstName = "Shaun"; 14: doc.lastName = "Xu"; 15: doc.roles = new string[] { "developer", "trainer", "presenter", "father" }; 16:  17: // insert the docuemnt 18: InsertADoc(client, collectionLink, doc).Wait(); 19:  20: Console.WriteLine("done"); 21: Console.ReadKey(); 22: } the insert code will be very simple as below, just provide the collection link and the object we are going to insert. 1: static async Task InsertADoc(DocumentClient client, string collectionLink, dynamic doc) 2: { 3: var document = await client.CreateDocumentAsync(collectionLink, doc); 4: Console.WriteLine(await JsonConvert.SerializeObjectAsync(document, Formatting.Indented)); 5: } Below is the result after the object had been inserted. Finally we will query the document from the database and collection. Similar to the insert code, we just need to specify the collection link so that the .NET SDK will help us to retrieve all documents in it. 1: static void Main(string[] args) 2: { 3: var endpoint = new Uri("https://shx.documents.azure.com:443/"); 4: var key = "LU2NoyS2fH0131TGxtBE4DW/CjHQBzAaUx/mbuJ1X77C4FWUG129wWk2oyS2odgkFO2Xdif9/ZddintQicF+lA=="; 5:  6: var client = new DocumentClient(endpoint, key); 7:  8: var collectionLink = "dbs/AAk3AA==/colls/AAk3AP6oFgA=/"; 9:  10: SelectDocs(client, collectionLink); 11:  12: Console.WriteLine("done"); 13: Console.ReadKey(); 14: } 15:  16: static void SelectDocs(DocumentClient client, string collectionLink) 17: { 18: var docs = client.CreateDocumentQuery(collectionLink + "docs/").ToList(); 19: foreach(var doc in docs) 20: { 21: Console.WriteLine(doc); 22: } 23: } Since there's only one document in my collection below is the result when I executed the code. As you can see all properties, includes the array was retrieve at the same time. DocumentDB also attached some properties we didn't specified such as "_rid", "_ts", "_self" etc., which is controlled by the service.   DocumentDB Benefit DocumentDB is a document NoSQL database service. Different from the traditional database, document database is truly schema-free. In a short nut, you can save anything in the same database and collection if it could be serialized to JSON. We you query the document database, all sub documents will be retrieved at the same time. This means you don't need to join other tables when using a traditional database. Document database is very useful when we build some high performance system with hierarchical data structure. For example, assuming we need to build a blog system, there will be many blog posts and each of them contains the content and comments. The comment can be commented as well. If we were using traditional database, let's say SQL Server, the database schema might be defined as below. When we need to display a post we need to load the post content from the Posts table, as well as the comments from the Comments table. We also need to build the comment tree based on the CommentID field. But if were using DocumentDB, what we need to do is to save the post as a document with a list contains all comments. Under a comment all sub comments will be a list in it. When we display this post we just need to to query the post document, the content and all comments will be loaded in proper structure. 1: { 2: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 3: "title": "xxxxx", 4: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 5: "postedOn": "08/25/2014 13:55", 6: "comments": 7: [ 8: { 9: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 10: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 11: "commentedOn": "08/25/2014 14:00", 12: "commentedBy": "xxx" 13: }, 14: { 15: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 16: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 17: "commentedOn": "08/25/2014 14:10", 18: "commentedBy": "xxx", 19: "comments": 20: [ 21: { 22: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 23: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 24: "commentedOn": "08/25/2014 14:18", 25: "commentedBy": "xxx", 26: "comments": 27: [ 28: { 29: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 30: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 31: "commentedOn": "08/25/2014 18:22", 32: "commentedBy": "xxx", 33: } 34: ] 35: }, 36: { 37: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 38: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 39: "commentedOn": "08/25/2014 15:02", 40: "commentedBy": "xxx", 41: } 42: ] 43: }, 44: { 45: "id": "xxxxx-xxxxx-xxxxx-xxxxx", 46: "content": "xxxxx, xxxxxxxxx. xxxxxx, xx, xxxx.", 47: "commentedOn": "08/25/2014 14:30", 48: "commentedBy": "xxx" 49: } 50: ] 51: }   DocumentDB vs. Table Storage DocumentDB and Table Storage are all NoSQL service in Microsoft Azure. One common question is "when we should use DocumentDB rather than Table Storage". Here are some ideas from me and some MVPs. First of all, they are different kind of NoSQL database. DocumentDB is a document database while table storage is a key-value database. Second, table storage is cheaper. DocumentDB supports scale out from one capacity unit to 5 in preview period and each capacity unit provides 10GB local SSD storage. The price is $0.73/day includes 50% discount. For storage service the highest price is $0.061/GB, which is almost 10% of DocumentDB. Third, table storage provides local-replication, geo-replication, read access geo-replication while DocumentDB doesn't support. Fourth, there is local emulator for table storage but none for DocumentDB. We have to connect to the DocumentDB on cloud when developing locally. But, DocumentDB supports some cool features that table storage doesn't have. It supports store procedure, trigger and user-defined-function. It supports rich indexing while table storage only supports indexing against partition key and row key. It supports transaction, table storage supports as well but restricted with Entity Group Transaction scope. And the last, table storage is GA but DocumentDB is still in preview.   Summary In this post I have a quick demonstration and introduction about the new DocumentDB service in Azure. It's very easy to interact through .NET and it also support REST API, Node.js SDK and Python SDK. Then I explained the concept and benefit of  using document database, then compared with table storage.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • C - struct problems - writing

    - by Catarrunas
    Hello, I'm making a program in C, and I'mm having some troubles with memory, I think. So my problem is: I have 2 functions that return a struct. When I run only one function at a time I have no problem whatsoever. But when I run one after the other I always get an error when writting to the second struct. Function struct item* ReadFileBIN(char *name) -- reads a binary file. struct tables* getMesasInfo(char* Filename) -- reads a text file. My code is this: #include "stdafx.h" #include <stdio.h> #include <stdlib.h> #include <string.h> #include <time.h> int numberOfTables=0; int numberOfItems=0; //struct tables* mesas; //struct item* Menu; typedef struct item{ char nome[100]; int id; float preco; }; typedef struct tables{ int id; int capacity; bool inUse; }; struct tables* getMesasInfo(char* Filename){ struct tables* mesas; char *c; int counter,numberOflines=0,temp=0; char *filename=Filename; FILE * G; G = fopen(filename,"r"); if (G==NULL){ printf("Cannot open file.\n"); } else{ while (!feof(G)){ fscanf(G, "%s", &c); numberOflines++; } fclose(G); } /* Memory allocate for input array */ mesas = (struct tables *)malloc(numberOflines* sizeof(struct tables*)); counter=0; G=fopen(filename,"r"); while (!feof(G)){ mesas[counter].id=counter; fscanf(G, "%d", &mesas[counter].capacity); mesas[counter].inUse= false; counter++; } fclose(G); numberOfTables = counter; return mesas; } struct item* ReadFileBIN(char *name) { int total=0; int counter; FILE *ptr_myfile; struct item my_record; struct item* Menu; ptr_myfile=fopen(name,"r"); if (!ptr_myfile) { printf("Unable to open file!"); } while (!feof(ptr_myfile)){ fread(&my_record,sizeof(struct item),1,ptr_myfile); total=total+1; } numberOfItems=total-1; Menu = (struct item *)calloc(numberOfItems , sizeof(struct item)); fseek(ptr_myfile, sizeof(struct item), SEEK_END); rewind(ptr_myfile); for ( counter=1; counter < total ; counter++) { fread(&my_record,sizeof(struct item),1,ptr_myfile); Menu[counter] = my_record; printf("Nome: %s\n",Menu[counter].nome); printf("ID: %d\n",Menu[counter].id); printf("Preco: %f\n",Menu[counter].preco); } fclose(ptr_myfile); return Menu; } int _tmain(int argc, _TCHAR* argv[]) { struct item* tt = ReadFileBIN("menu.dat"); struct tables* t = getMesasInfo("Capacity.txt"); getchar(); }** Thanks in advance.

    Read the article

  • STL find performs bettern than hand-crafter loop

    - by dusha
    Hello all, I have some question. Given the following C++ code fragment: #include <boost/progress.hpp> #include <vector> #include <algorithm> #include <numeric> #include <iostream> struct incrementor { incrementor() : curr_() {} unsigned int operator()() { return curr_++; } private: unsigned int curr_; }; template<class Vec> char const* value_found(Vec const& v, typename Vec::const_iterator i) { return i==v.end() ? "no" : "yes"; } template<class Vec> typename Vec::const_iterator find1(Vec const& v, typename Vec::value_type val) { return find(v.begin(), v.end(), val); } template<class Vec> typename Vec::const_iterator find2(Vec const& v, typename Vec::value_type val) { for(typename Vec::const_iterator i=v.begin(), end=v.end(); i<end; ++i) if(*i==val) return i; return v.end(); } int main() { using namespace std; typedef vector<unsigned int>::const_iterator iter; vector<unsigned int> vec; vec.reserve(10000000); boost::progress_timer pt; generate_n(back_inserter(vec), vec.capacity(), incrementor()); //added this line, to avoid any doubts, that compiler is able to // guess the data is sorted random_shuffle(vec.begin(), vec.end()); cout << "value generation required: " << pt.elapsed() << endl; double d; pt.restart(); iter found=find1(vec, vec.capacity()); d=pt.elapsed(); cout << "first search required: " << d << endl; cout << "first search found value: " << value_found(vec, found)<< endl; pt.restart(); found=find2(vec, vec.capacity()); d=pt.elapsed(); cout << "second search required: " << d << endl; cout << "second search found value: " << value_found(vec, found)<< endl; return 0; } On my machine (Intel i7, Windows Vista) STL find (call via find1) runs about 10 times faster than the hand-crafted loop (call via find2). I first thought that Visual C++ performs some kind of vectorization (may be I am mistaken here), but as far as I can see assembly does not look the way it uses vectorization. Why is STL loop faster? Hand-crafted loop is identical to the loop from the STL-find body. I was asked to post program's output. Without shuffle: value generation required: 0.078 first search required: 0.008 first search found value: no second search required: 0.098 second search found value: no With shuffle (caching effects): value generation required: 1.454 first search required: 0.009 first search found value: no second search required: 0.044 second search found value: no Many thanks, dusha. P.S. I return the iterator and write out the result (found or not), because I would like to prevent compiler optimization, that it thinks the loop is not required at all. The searched value is obviously not in the vector.

    Read the article

  • Improving the Industry’s Best Cloud Project Portfolio Management (PPM) Solution – New Release of Instantis EnterpriseTrack

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Yasser Mahmud, Vice President of Product Strategy & Industry Marketing, Oracle Primavera We know that in today’s rapidly changing world, organizations and leaders must adapt to fierce competition, business climate change and customers consistently demanding more for less. And project portfolio management (PPM) initiatives are a key component to help organizations thrive and stand out among competitors. That’s why I’m excited to announce Instantis EnterpriseTrack 8.5. Since Oracle’s acquisition of Instantis late last year, we’ve been busy working to enhance the leading cloud PPM solution. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here’s what’s new: Perform more precise resource planning and management  Gain more precise capacity visibility for resource planning and project execution with resource calendars that capture vacation, LOA and part-time resource availability Ensure compliance and governance processes  with activity labor cost capitalization Improve project labor cost estimation, tracking and administration with variable resource rates Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Optimize Project Demand Management And Execution Enhance productivity and analysis with project request flexible staffing plan and simplified finance estimation Improve project status communication and execution with estimated time to complete (ETC) in timesheets and projects Achieve audit compliance and governance with field change history for key project and project request fields Enforce proper financial accounting processes with the new strict finance lock/close period option Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Improve Reporting and the User Experience Enhance user productivity and analysis with improved listing pages Improve program reporting with new program filters in listing pages and reports Run large data volume user defined Excel reports with MS Excel 2010 support Accelerate user productivity and satisfaction with an improved user interface for project issues, risks, and scope changes Enjoy faster system response and improved user experience with  optimized listing pages, resource planning, and application cache Deliver user self-service training on demand with UPK support And if that wasn’t enough, we’ve also made additional improvements to timesheets, field change history and finance lock/close period. Learn more about Instantis EnterpriseTrack 8.5.

    Read the article

  • Big Visible Charts

    - by Robert May
    An important part of Agile is the concept of transparency and visibility. In proper functioning teams, stakeholders can look at any team at any time in the iteration or release and see how that team is doing by simply looking at what we call Big Visible Charts. If you’ve done Scrum, you’ve seen these charts. However, interpreting these charts can often be an art form. There are several different charts that can be useful. In this newsletter, I’ll focus on the Iteration Burndown and Cumulative Flow charts. I’ve included a copy of the spreadsheet that I used to create the charts, and if you don’t have a tool that creates them for you, you can use this spreadsheet to do so. Our preferred tool for managing Scrum projects is Rally. Rally creates all of these charts for you, saving you quite a bit of time. The Iteration Burndown and Cumulative Flow Charts This is the main chart that teams use. Although less useful to stakeholders, this chart is critical to the team and provides quite a bit of information to the team about how their iteration is going. Most charts are a combination of the charts below, so you may need to combine aspects of each section to understand what is happening in your iterations. Ideal Ah, isn’t that a pretty picture? Unfortunately, it’s also very unrealistic. I’ve seen iterations that come close to ideal, but never that match perfectly. If your iteration matches perfectly, chances are, someone is playing with the numbers. Reality is just too difficult to have a burndown chart that matches this exactly. Late Planning Iteration started, but the team didn’t. You can tell this by the fact that the real number of estimated hours didn’t appear until day two. In the cumulative flow, you can also see that nothing was defined in Day one and two. You want to avoid situations like this. You’ll note that the team had to burn faster than is ideal to meet the iteration because of the late planning. This often results in long weeks and days. Testing Starved Determining whether or not testing is starved is difficult without the cumulative flow. The pattern in the burndown could be nothing more that developers not completing stories early enough or could be caused by stories being too big. With the cumulative flow, however, you see that only small bites are in progress and stories were completed early, but testing didn’t start testing until the end of the iteration, and didn’t complete testing all stories in the iteration. When this happens, question whether or not your testing resources are sufficient for your team and whether or not acceptance is adequately defined. No Testing With this one, both graphs show the same thing; the team needs testers and testing! Without testing, what was completed cannot be verified to make sure that it is acceptable to the business. If you find yourself in this situation, review your testing practices and acceptance testing process and make changes today. Late Development With this situation, both graphs tell a story. In the top graph, you can see that the hours failed to burn down as quickly as the team expected. This could be caused by the team not correctly estimating their hours or the team could have had illness or some other issue that affected them. Often, when teams are tackling something that is more unknown, they’ll run into technical barriers that cause the burn down to happen slower than expected. In the cumulative flow graph, you can see that not much was completed in the first few days. This could be because of illness or technical barriers or simply poor estimation. Testing was able to keep up with everything that was completed, however. No Tool Updating When you see graphs that look like this, you can be assured that it’s because the team is not updating the tool that generates the graphs. Review your policy for when they are to update. On the teams that I run, I require that each team member updates the tool at least once daily. You should also check to see how well the team is breaking down stories into tasks. If they’re creating few large tasks, graphs can look similar to this. As a general rule, I never allow tasks, other than Unit Testing and Uncertainty, to be greater than eight hours in duration. Scope Increase I always encourage team members to enter in however much time they think they have left on a task, even if that means increasing the total amount of time left to do. You get a much better and more realistic picture this way. Increasing time remaining could explain the burndown graph, but by looking at the cumulative flow graph, we can see that stories were added to the iteration and scope was increased. Since planning should consume all of the hours in the iteration, this is almost always a bad thing. If the scope change happened late in the iteration and the hours remaining were well below the ideal burn, then increasing scope is probably o.k., but estimation needs to get better. However, with the charts above, that’s clearly not what happened and the team was required to do extra work to make the iteration. If you find this happening, your product owner and ScrumMasters need training. The team also needs to learn to say no. Scope Decrease Scope decreases are just as bad as scope increases. Usually, graphs above show that the team did a poor job of estimating their stories and part way through had to reduce scope to change the iteration. This will happen once in a while, but if you find it’s a pattern on your team, you need to re-evaluate planning. Some teams are hopelessly optimistic. In those cases, I’ll introduce a task I call “Uncertainty.” With Uncertainty, the team estimates how many hours they might need if things don’t go well with the tasks they’ve defined. They try to estimate things that could go poorly and increase the time appropriately. Having an Uncertainty task allows them to have a low and high estimate. Uncertainty should not just be an arbitrary buffer. It must correlate to real uncertainty in the tasks that have been defined. Stories are too Big Often, we see graphs like the ones above. Note that the burndown looks fairly good, other than the chunky acceptance of stories. However, when you look at cumulative flow, you can see that at one point, everything is in progress. This is a bad thing. When you see graphs like this, you’re in one of two states. You may just have a very small team and can only handle one or two stories in your iteration. If you have more than one or two people, then the most likely problem is that your stories are far too big. To combat this, break large high hour stories into smaller pieces that can be completed independently and accepted independently. If you don’t, you’ll likely be requiring your testers to do heroic things to complete testing on the last day of the iteration and you’re much more likely to have the entire iteration fail, because of the limited amount of things that can be completed. Summary There are other charts that can be useful when doing scrum. If you don’t have any big visible charts, you really need to evaluate your process and change. These charts can provide the team a wealth of information and help you write better software. If you have any questions about charts that you’re seeing on your team, contact me with a screen capture of the charts and I’ll tell you what I’m seeing in those charts. I always want this information to be useful, so please let me know if you have other questions. Technorati Tags: Agile

    Read the article

  • Oracle’s New Memory-Optimized x86 Servers: Getting the Most Out of Oracle Database In-Memory

    - by Josh Rosen, x86 Product Manager-Oracle
    With the launch of Oracle Database In-Memory, it is now possible to perform real-time analytics operations on your business data as it exists at that moment – in the DRAM of the server – and immediately return completely current and consistent data. The Oracle Database In-Memory option dramatically accelerates the performance of analytics queries by storing data in a highly optimized columnar in-memory format.  This is a truly exciting advance in database technology.As Larry Ellison mentioned in his recent webcast about Oracle Database In-Memory, queries run 100 times faster simply by throwing a switch.  But in order to get the most from the Oracle Database In-Memory option, the underlying server must also be memory-optimized. This week Oracle announced new 4-socket and 8-socket x86 servers, the Sun Server X4-4 and Sun Server X4-8, both of which have been designed specifically for Oracle Database In-Memory.  These new servers use the fastest Intel® Xeon® E7 v2 processors and each subsystem has been designed to be the best for Oracle Database, from the memory, I/O and flash technologies right down to the system firmware.Amongst these subsystems, one of the most important aspects we have optimized with the Sun Server X4-4 and Sun Server X4-8 are their memory subsystems.  The new In-Memory option makes it possible to select which parts of the database should be memory optimized.  You can choose to put a single column or table in memory or, if you can, put the whole database in memory.  The more, the better.  With 3 TB and 6 TB total memory capacity on the Sun Server X4-4 and Sun Server X4-8, respectively, you can memory-optimize more, if not your entire database.   Sun Server X4-8 CMOD with 24 DIMM slots per socket (up to 192 DIMM slots per server) But memory capacity is not the only important factor in selecting the best server platform for Oracle Database In-Memory.  As you put more of your database in memory, a critical performance metric known as memory bandwidth comes into play.  The total memory bandwidth for the server will dictate the rate in which data can be stored and retrieved from memory.  In order to achieve real-time analysis of your data using Oracle Database In-Memory, even under heavy load, the server must be able to handle extreme memory workloads.  With that in mind, the Sun Server X4-8 was designed with the maximum possible memory bandwidth, providing over a terabyte per second of total memory bandwidth.  Likewise, the Sun Server X4-4 also provides extreme memory bandwidth in an even more compact form factor with over half a terabyte per second, providing customers with scalability and choice depending on the size of the database.Beyond the memory subsystem, Oracle’s Sun Server X4-4 and Sun Server X4-8 systems provide other key technologies that enable Oracle Database to run at its best.  The Sun Server X4-4 allows for up 4.8 TB of internal, write-optimized PCIe flash while the Sun Server X4-8 allows for up to 6.4 TB of PCIe flash.  This enables dramatic acceleration of data inserts and updates to Oracle Database.  And with the new elastic computing capability of Oracle’s new x86 servers, server performance can be adapted to your specific Oracle Database workload to ensure that every last bit of processing power is utilized.Because Oracle designs and tests its x86 servers specifically for Oracle workloads, we provide the highest possible performance and reliability when running Oracle Database.  To learn more about Sun Server X4-4 and Sun Server X4-8, you can find more details including data sheets and white papers here. Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software.  He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers. 

    Read the article

  • SQLAuthority News – Community Service and Public Speaking Engagements

    - by pinaldave
    Today is the last day of the year and I was going over my memories for year 2010. Almost all of them are good and I feel for sure better person in terms of knowledge, nature and overall human being. Looking back at the year, it is very satisfying as I was able to go out in public and help community out at various capacity. Thought, most of the time my contribution was as speaker, many times, I have reached out and helped organized event and worked at any capacity to get the event out. I have taken parts in many TechEds, PASS events, Virtual Tech Days, Various Community Events around the Globe and my contribution is not limited to my country only. Overall – I feel good to be part of this wonderful and supportive community. SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010 SQLAuthority News – A Successful Performance Tuning Seminar at Pune – Dec 4-5, 2010 SQL SERVER – A Successful Performance Tuning Seminar – Hyderabad – Nov 27-28, 2010 – Next Pune SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience SQLAuthority News – Statistics and Best Practices – Virtual Tech Days – Nov 22, 2010 SQLAuthority News – SQL Server Performance Optimizations Seminar – Grand Success – Colombo, Sri Lanka – Oct 4 – 5, 2010 SQL SERVER – Visiting Alma Mater – Delivering Session on Database Performance and Career – Nirma Institute of Technology SQLAuthority News – Feedback Received for Virtual Tech Days Sessions on Spatial Database SQLAuthority News – Community Tech Days, Ahmedabad – July 24, 2010 SQLAuthority News – SQL Data Camp, Chennai, July 17, 2010 – A Huge Success SQLAuthority News – 2 Sessions at TechInsight 2010 – June 29 – July 1, 2010 SQLAuthority News – Author Visit – SQL Server 2008 R2 Launch SQLAuthority News – Professional Development and Community SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Opportunity of A Lifetime SQLAuthority News – Speaking Sessions at TechEd India – 3 Sessions – 1 Panel Discussion SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010 SQLAuthority News – Excellent Event – TechEd Sri Lanka – Feb 8, 2010 SQLAuthority News – Hyderabad Techies February Fever Feb 11, 2010 – Indexing for Performance SQLAuthority News – MUGH – Microsoft User Group Hyderabad – Feb 2, 2010 Session Review SQLAuthority News – Ahmedabad Community Tech Days – Jan 30, 2010 – Huge Success For earlier year’s contribution you can check my webpage over here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology

    Read the article

  • MP3 player mpman TS300 not recognized

    - by Nick Lemaire
    I just received a mpman ts300 mp3 player for Christmas. But when I try to connect it to ubuntu (10.10) through usb it doesn't seem to be recognized. I searched for a linuxdriver but came up with nothing. I even tried installing mpman manager from the software center, but still the same problem... Has anybody got any ideas about how to fix this? Thank you edit: some additional information When I plug it in, it doesn't show up under /dev. And it is not listed in the result of 'lsusb' This is the output of 'dmesg' [19571.732541] usb 1-4: new high speed USB device using ehci_hcd and address 2 [19571.889154] scsi7 : usb-storage 1-4:1.0 [19572.883155] scsi 7:0:0:0: Direct-Access TS300 USB DISK 1.00 PQ: 0 ANSI: 0 [19572.885856] sd 7:0:0:0: Attached scsi generic sg2 type 0 [19572.887266] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19573.012547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.292550] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.572565] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.725019] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [19573.725024] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19573.728521] sd 7:0:0:0: [sdb] Attached SCSI removable disk [19575.333015] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19575.452547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19580.603253] usb 1-4: device descriptor read/all, error -110 [19580.722560] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19595.842579] usb 1-4: device descriptor read/64, error -110 [19611.072656] usb 1-4: device descriptor read/64, error -110 [19611.302540] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19616.332568] usb 1-4: device descriptor read/8, error -110 [19621.462692] usb 1-4: device descriptor read/8, error -110 [19621.692551] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19626.722567] usb 1-4: device descriptor read/8, error -110 [19631.852802] usb 1-4: device descriptor read/8, error -110 [19631.962587] usb 1-4: USB disconnect, address 2 [19631.962587] sd 7:0:0:0: Device offlined - not ready after error recovery [19631.962840] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965104] sd 7:0:0:0: [sdb] READ CAPACITY failed [19631.965109] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [19631.965112] sd 7:0:0:0: [sdb] Sense not available. [19631.965125] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965130] sdb: detected capacity change from 4028628992 to 0 [19632.130042] usb 1-4: new high speed USB device using ehci_hcd and address 3 [19647.242550] usb 1-4: device descriptor read/64, error -110 [19662.472560] usb 1-4: device descriptor read/64, error -110 [19662.702566] usb 1-4: new high speed USB device using ehci_hcd and address 4 [19677.822587] usb 1-4: device descriptor read/64, error -110 [19693.052575] usb 1-4: device descriptor read/64, error -110 [19693.282582] usb 1-4: new high speed USB device using ehci_hcd and address 5 [19698.312600] usb 1-4: device descriptor read/8, error -110 [19703.442594] usb 1-4: device descriptor read/8, error -110 [19703.672548] usb 1-4: new high speed USB device using ehci_hcd and address 6 [19708.702581] usb 1-4: device descriptor read/8, error -110 [19713.840077] usb 1-4: device descriptor read/8, error -110 [19713.942555] hub 1-0:1.0: unable to enumerate USB device on port 4 [19714.262545] usb 4-2: new full speed USB device using uhci_hcd and address 2 [19729.382549] usb 4-2: device descriptor read/64, error -110 [19744.612534] usb 4-2: device descriptor read/64, error -110 [19744.842543] usb 4-2: new full speed USB device using uhci_hcd and address 3 [19759.962714] usb 4-2: device descriptor read/64, error -110 [19775.200047] usb 4-2: device descriptor read/64, error -110 [19775.422630] usb 4-2: new full speed USB device using uhci_hcd and address 4 [19780.444498] usb 4-2: device descriptor read/8, error -110 [19785.574491] usb 4-2: device descriptor read/8, error -110 [19785.802547] usb 4-2: new full speed USB device using uhci_hcd and address 5 [19790.824490] usb 4-2: device descriptor read/8, error -110 [19795.961473] usb 4-2: device descriptor read/8, error -110 [19796.062556] hub 4-0:1.0: unable to enumerate USB device on port 2

    Read the article

  • Realtek RTL8111/8168B wired network doesn't work anymore

    - by Radar4002
    This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

    Read the article

  • WebLogic Server Performance and Tuning: Part II - Thread Management

    - by Gokhan Gungor
    WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

    Read the article

  • Organization &amp; Architecture UNISA Studies &ndash; Chap 6

    - by MarkPearl
    Learning Outcomes Discuss the physical characteristics of magnetic disks Describe how data is organized and accessed on a magnetic disk Discuss the parameters that play a role in the performance of magnetic disks Describe different optical memory devices Magnetic Disk The way data is stored on and retried from magnetic disks Data is recorded on and later retrieved form the disk via a conducting coil named the head (in many systems there are two heads) The writ mechanism exploits the fact that electricity flowing through a coil produces a magnetic field. Electric pulses are sent to the write head, and the resulting magnetic patterns are recorded on the surface below with different patterns for positive and negative currents The physical characteristics of a magnetic disk   Summarize from book   The factors that play a role in the performance of a disk Seek time – the time it takes to position the head at the track Rotational delay / latency – the time it takes for the beginning of the sector to reach the head Access time – the sum of the seek time and rotational delay Transfer time – the time it takes to transfer data RAID The rate of improvement in secondary storage performance has been considerably less than the rate for processors and main memory. Thus secondary storage has become a bit of a bottleneck. RAID works on the concept that if one disk can be pushed so far, additional gains in performance are to be had by using multiple parallel components. Points to note about RAID… RAID is a set of physical disk drives viewed by the operating system as a single logical drive Data is distributed across the physical drives of an array in a scheme known as striping Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure (not supported by RAID 0 or RAID 1) Interesting to note that the increase in the number of drives, increases the probability of failure. To compensate for this decreased reliability RAID makes use of stored parity information that enables the recovery of data lost due to a disk failure.   The RAID scheme consists of 7 levels…   Category Level Description Disks Required Data Availability Large I/O Data Transfer Capacity Small I/O Request Rate Striping 0 Non Redundant N Lower than single disk Very high Very high for both read and write Mirroring 1 Mirrored 2N Higher than RAID 2 – 5 but lower than RAID 6 Higher than single disk Up to twice that of a signle disk for read Parallel Access 2 Redundant via Hamming Code N + m Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Parallel Access 3 Bit interleaved parity N + 1 Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Independent Access 4 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, significantly lower than single disk for write Similar to RAID 0 for read, significantly lower than single disk for write Independent Access 5 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, lower than single disk for write Similar to RAID 0 for read, generally  lower than single disk for write Independent Access 6 Block interleaved parity N + 2 Highest of all listed alternatives Similar to RAID 0 for read; lower than RAID 5 for write Similar to RAID 0 for read, significantly lower than RAID 5  for write   Read page 215 – 221 for detailed explanation on RAID levels Optical Memory There are a variety of optical-disk systems available. Read through the table on page 222 – 223 Some of the devices include… CD CD-ROM CD-R CD-RW DVD DVD-R DVD-RW Blue-Ray DVD Magnetic Tape Most modern systems use serial recording – data is lade out as a sequence of bits along each track. The typical recording used in serial is referred to as serpentine recording. In this technique when data is being recorded, the first set of bits is recorded along the whole length of the tape. When the end of the tape is reached the heads are repostioned to record a new track, and the tape is again recorded on its whole length, this time in the opposite direction. That process continued back and forth until the tape is full. To increase speed, the read-write head is capable of reading and writing a number of adjacent tracks simultaneously. Data is still recorded serially along individual tracks, but blocks in sequence are stored on adjacent tracks as suggested. A tape drive is a sequential access device. Magnetic tape was the first kind of secondary memory. It is still widely used as the lowest-cost, slowest speed member of the memory hierarchy.

    Read the article

  • My LAN USB NIC is not working in ubuntu 11.10?

    - by Gaurav_Java
    Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

    Read the article

  • New PeopleSoft HCM 9.1 On Demand Standard Edition provides a complete set of IT services at a low, predictable monthly cost

    - by Robbin Velayedam
    At Oracle Open World last month, Oracle announced that we are extending our On Demand offerings with the general availability of PeopleSoft On Demand Standard Edition. Standard Edition represents Oracle’s commitment to providing customers a choice of solutions, technology, and deployment options commensurate with their business needs and future growth. The Standard Edition offering complements the traditional On Demand offerings (Enterprise and Professional Editions) by focusing on a low, predictable monthly cost model that scales with the size of your business.   As part of Oracle's open cloud strategy, customers can freely move PeopleSoft licensed applications between on premise and the various  on demand options as business needs arise.    In today’s business climate, aggressive and creative business objectives demand more of IT organizations. They are expected to provide technology-based solutions to streamline business processes, enable online collaboration and multi-tasking, facilitate data mining and storage, and enhance worker productivity. As IT budgets remain tight in a recovering economy, the challenge becomes how to meet these demands with limited time and resources. One way is to eliminate the variable costs of projects so that your team can focus on the high priority functions and better predict funding and resource needs two to three years out. Variable costs and changing priorities can derail the best laid project and capacity plans. The prime culprits of variable costs in any IT organization include disaster recovery, security breaches, technical support, and changes in business growth and priorities. Customers have an immediate need for solutions that are cheaper, predictable in cost, and flexible enough for long-term growth or capacity changes. The Standard Edition deployment option fulfills that need by allowing customers to take full advantage of the rich business functionality that is inherent to PeopleSoft HCM, while delegating all application management responsibility – such as future upgrades and product updates – to Oracle technology experts, at an affordable and expected price. Standard Edition provides the advantages of the secure Oracle On Demand hosted environment, the complete set of PeopleSoft HCM configurable business processes, and timely management of regular updates and enhancements to the application functionality and underlying technology. Standard Edition has a convenient monthly fee that is scalable by number of employees, which helps align the customer’s overall cost of ownership with its size and anticipated growth and business needs. In addition to providing PeopleSoft HCM applications' world class business functionality and Oracle On Demand's embassy-grade security, Oracle’s hosted solution distinguishes itself from competitors by offering customers the ability to transition between different deployment and service models at any point in the application ownership lifecycle. As our customers’ business and economic climates change, they are free to transition their applications back to on-premise at any time. HCM On Demand Standard Edition is based on configurability options rather than customizations, requiring no additional code to develop or maintain. This keeps the cost of ownership low and time to production less than a month on average. Oracle On Demand offers the highest standard of security and performance by leveraging a state-of-the-art data center with dedicated databases, servers, and secured URL all within a private cloud. Customers will not share databases, environments, platforms, or access portals with other customers because we value how mission critical your data are to your business. Oracle’s On Demand also provides a full breadth of disaster recovery services to provide customers the peace of mind that their data are secure and that backup operations are in place to keep their businesses up and running in the case of an emergency. Currently we have over 50 PeopleSoft customers delegating us with the management of their applications through Oracle On Demand. If you are a customer interested in learning more about the PeopleSoft HCM 9.1 Standard Edition and how it can help your organization minimize your variable IT costs and free up your resources to work on other business initiatives, contact Oracle or your Account Services Representative today.

    Read the article

  • "The connection has timed out" - Please help!

    - by gon
    I recently installed a fresh Ubuntu 12.04 LTS on a desktop, and the installation itself was successful (other than 'grub rescue' issue that I encountered but fixed) but this connection problem is really giving me a headache. Symptoms: 1. When I open the FireFox browser and try to connect to a website, it just hangs for a while saying "Connecting..." but eventually loads an error page "The connection has timed out". 2. It's not a browser problem (and I tried setting ipv6 thing to "true" at about:config) because running "sudo apt-get install [some-random-package]" at terminal fails ("E: Unable to locate package [package]") too. All other operations that need internet access are not working. 3. I certainly see a wired network (called "eth1") at the Network Manager, and it says "Connection Established" after disconnecting and then connecting again. I have tried almost everything that could be found from google search results still no luck. Their problems slightly differ from mine or the solutions just don't work. By the way it didn't have internet access when installing Ubuntu 12.04. (I ignored the message that I need internet to install Ubuntu) Could this be a problem? I'm sorry I don't remember if internet worked or not on the previous version of Ubuntu. :( I would really appreciate your help... I don't even know what more to do if this fails too.. Thanks!! Thanks for your comment. Here is the result of ifconfig: eth0 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b9 inet addr:10.10.65.185 Bcast:10.10.65.255 Mask:255.255.255.0 inet6 addr: fe80::7aac:c0ff:fe3d:b2b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3907 errors:0 dropped:0 overruns:0 frame:0 TX packets:771 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:393118 (393.1 KB) TX bytes:73472 (73.4 KB) Interrupt:16 eth1 Link encap:Ethernet HWaddr 78:ac:c0:3d:b2:b8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204 (204.0 B) TX bytes:204 (204.0 B) route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.10.65.1 0.0.0.0 UG 0 0 0 eth0 10.10.65.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 /etc/resolv.conf: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver 10.81.1.8 nameserver 10.1.2.10 nameserver 127.0.0.1 search yamatake.local /etc/network/interfaces: auto lo iface lo inet loopback #auto eth0 #iface eth0 inet dhcp #auto eth1 #iface eth1 inet dhcp And I'll also include the result of 'sudo lshw -C network' in case it might help: *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 78:ac:c0:3d:b2:b9 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 ip=10.10.65.185 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:93 memory:fc000000-fc00ffff *-network description: Ethernet interface product: NetXtreme BCM5764M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth1 version: 10 serial: 78:ac:c0:3d:b2:b8 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5764m-v3.35 latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s resources: irq:94 memory:fb000000-fb00ffff

    Read the article

  • how to rotate the Circle in DrawRect?

    - by senthilmuthu
    HI, i want to draw a circle in DrawRect through context like pie chart(took from tutorial) thorugh UITouch? i have given the code as follows,how can i rotate ? any help please? define PI 3.14159265358979323846 define snapshot_start 360 define snapshot_finish 360 static inline float radians(double degrees) { return degrees * PI / 180; } - (void)drawRect:(CGRect)rect { // Drawing code CGRect parentViewBounds = self.bounds; CGFloat x = CGRectGetWidth(parentViewBounds)/2; CGFloat y = CGRectGetHeight(parentViewBounds)*0.55; // Get the graphics context and clear it CGContextRef ctx = UIGraphicsGetCurrentContext(); CGContextClearRect(ctx, rect); // define stroke color CGContextSetRGBStrokeColor(ctx, 1, 1, 1, 1.0); // define line width CGContextSetLineWidth(ctx, 4.0); // need some values to draw pie charts double snapshotCapacity =20; double rawCapacity = 100; double systemCapacity = 1; int offset = 5; double pie1_start = 315.0; double pie1_finish = snapshotCapacity *360.0/rawCapacity; double system_finish = systemCapacity*360.0/rawCapacity; CGContextSetFillColor(ctx, CGColorGetComponents( [[UIColor greenColor] CGColor])); CGContextMoveToPoint(ctx, x+2*offset, y); CGContextAddArc(ctx, x+2*offset, y, 100, radians(snapshot_start), radians(snapshot_start+snapshot_finish), 0); CGContextClosePath(ctx); CGContextFillPath(ctx); // system capacity CGContextSetFillColor(ctx, CGColorGetComponents( [[UIColor colorWithRed:15 green:165/255 blue:0 alpha:1 ] CGColor])); CGContextMoveToPoint(ctx, x+offset,y); CGContextAddArc(ctx, x+offset, y, 100, radians(snapshot_start+snapshot_finish+offset), radians(snapshot_start+snapshot_finish+system_finish), 0); CGContextClosePath(ctx); CGContextFillPath(ctx); /* data capacity */ CGContextSetFillColor(ctx, CGColorGetComponents( [[UIColor colorWithRed:99/255 green:184/255 blue:255/255 alpha:1 ] CGColor])); CGContextMoveToPoint(ctx, x, y); CGContextAddArc(ctx, x, y, 100, radians(snapshot_start+snapshot_finish+system_finish+offset), radians(snapshot_start), 0); CGContextClosePath(ctx); CGContextFillPath(ctx); }

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >