Search Results

Search found 590 results on 24 pages for 'flip'.

Page 17/24 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Dell Studio 17 - turning off suddenly

    - by studiohack
    I have a Dell Studio 17 laptop, a refurbished model almost 2 years old...It is currently running Windows 7 32-bit, Home Premium. Via a clean install, it is a Vista upgrade machine...A while back, a problem started to develop while running Vista that it would suddenly just turn off. No warnings, messages, anything. It was like I had the battery out, then just unplugged it from the wall. Just like that. Over several months of this happening (or more), I've observed several things...First, it only seems to happen when I'm doing memory-intensive things, such as watching a online video full screen or running many applications in the background...Second, I can tell when it is about to "flip" as I've termed it, when the fan starts running...the computer gets really hot in places... Anyways, I'm pretty sure this is a hardware problem, because it still exists, even after a Vista-to-7 Upgrade...Is this true? Hardware vs. software? Is there anything I can do to fix this? Is it just a specific component or what? What do you recommend? Thanks!!

    Read the article

  • ScreenOS MIP selection for outbound connections

    - by David Mackintosh
    Given a ScreenOS 6.3.0 firewall with this configuration: unset flow reverse-route clear-text set interface "ethernet0/0" zone "Trust" set interface ethernet0/0 ip 192.168.1.1/24 set interface ethernet0/2 ip 10.0.0.1/24 set interface ethernet0/2 mip 10.9.9.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set interface ethernet0/2 mip 10.8.8.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set route 0.0.0.0/0 interface ethernet0/2 gateway 10.0.0.254 ... (and assuming appropriate policies) is there a way to control which MIP the firewall selects for outbound connections initiated by 192.168.1.10? (presumably because I want the upstream 10.0.0.254 to do different things with the packet depending on what its source IP is). Update: OK, my scenario is this: I have two ISP uplinks, each giving me a different IP space. Each ISP will only route the IP space they have assigned me. So in order for the server to be reachable by both ISPs, I need two MIPs for the same server, one on each interface. Inbound traffic will work fine with the 'unset flow reverse-route clear-text' option in use. But for outbound (think an email server sending a message) I need a way to select an appropriate MIP depending on which outbound link I want the system to use, and I want this to be resiliant so that if the link the firewall prefers goes down overnight I don't have to manually flip something to keep the mail flowing. Basically I'm trying to avoid having to buy a link-balancer appliance (or two since I'll need a cluster). Is there a way to do this?

    Read the article

  • Alternatives to ntbackup

    - by Chris J
    Is anyone aware of any good (for a given value of "good") alternatives to ntbackup? There's a few quirks with ntbackup that I still find odd, and occasionally (and for no obvious reason) ntbackup just doesn't back up - usually complaining about that the wrong tape's inserted even though it's been told to just use the tape that's in the drive regardless. I've experiemented with cygwin's tar and cpio and Win32 ports of these utilities, but I've not had any luck getting them to see the tape device (so if someone does use these utilities to write to a tape device, also be interested to know how). Essentially all I'm looking for is a reliable program that I can tell to back-up a list of locations to the tape, and not to care about anything like formatting tapes, or sticking volume labels on them (and conversely then makes it fairly straightforward to restore off as well). On the flip-side, I don't want something that will attempt to manage our tapes. Don't get me wrong here -- ntbackup can do the job, but its quirks are making look at possible alternatives. Any suggestions? If it's open source, even better.

    Read the article

  • Talk on multiple IRC channels at once?

    - by TwoPixelGrid
    I seem to remember, back in '91 or so, that the console-based IRCII implemention on the Solaris box that first got me on the net would let me /Join multiple channels on a given network such that, as new channels were joined, they would start scrolling to the single console view. Let's call it the 'interleaved conversation' chat paradigm. Am I rembering this correctly? More importantly, is there a modern way of doing this in any of the GUI-based clients? I'm surprised this isn't a common desire/feature because I think it would greatly improve the experience, especially on channels with high SNR. For example, If I'm working on a project I may connect to Freenode and join : #Qt,#OpenGL,#C++. As it is now, with mIRC,Xchat, I have to manually flip between pages just to see whats being said and to reply. What I envision would go more like this (using only 2 channels for simplicity) /join #QT #OpenGL < [QT] QtChannelUser: Hello TwoPixelGrid. < [OpenGL] OpenGLChannelUser: Hi there TwoPixelGrid. @QT: Hi QtChannelUser @OpenGL: Hello againOpenGLChannelUser And this message is going out to all my channels. Do I have to write a new client or is this already out there?

    Read the article

  • Make a snapshot of a live mySQL database with myISAM & innoDB tables without locking

    - by Artem
    We have a live database in production where we are running out of space on the server. So I would like to transfer to a new server without any downtime (or as little downtime as possible). In general, I would also like to have a hot failover copy of the database available. I would like to use replication to get all of the data copied to the new machine, and then at some point flip a switch and have that new machine become the master (normal failover scenario). My problem is that I am not sure how to initialize replication without locking the db to make the initial snapshot I will use? Is there any way to do this? I know I could do it using single-transaction if I was using innoDB, but very unfortunately we have some myISAM tables in there (in fact the largest 150GB table is myISAM and I want to switch it to InnoDB but I can't do it until I have more space & a hot copy to switch to). Any ideas? Is there some way to make such a snapshot? Or is there alternatively a way to get replication to "catch up" without an snapshot for initialization?

    Read the article

  • Surface (Pro) Soft Keyboard + Hardware Keyboard Issue

    - by Matt Clark
    When I got my Surface Pro 2, I loved it, and everything seemed to work flawlessly, until, wait for it, windows updates... The issue that I am having is the following, I primarily use the TC (TypeCover), as the Pro is an out-of-office laptop replacement for me, that I can still use to do whatever I need, but there are times when I will flip the cover, and use the system in tablet mode. The problem is that even when the TC is attached, any text field I click on, causes the OSK (on screen keyboard) to appear, as if I was running the system in tablet mode. As soon as I press a single button on the TC, the OSK is dismissed. When I first got the system, this was NOT the case, and it functioned as it should, where the OSK will only appear if the TC was not present. The biggest problem that I am having is the fact that the OSK causes the windows to be resized. Maximized windows will be shrunk, and stretched to their previous state, however a window that is not maximized will stay in its shrunken state, after the OSK has been dismissed. Below are pictures that show what is happening. Has anyone else experienced this issue? And is there any way to fix it? As you might imagine, having spent a pretty penny on a device like this, it it quite an annoying bug that needs fixing. I have been dealing with this issue for about 3 months now.

    Read the article

  • Setting SVN permissions with Dav SVN Authz

    - by Ken
    There seems to be a path inheritance issue which is boggling me over access restrictions. For instance, if I grant rw access one group/user, and wish to restrict it some /../../secret to none, it promptly spits in my face. Here is an example of what I'm trying to achieve in dav_svn.authz [groups] grp_W = a, b, c, g grp_X = a, d, f, e grp_Y = a, e, [/] * = @grp_Y = rw [somerepo1:/projectPot] @grp_W = rw [somerepo2:/projectKettle] @grp_X = rw What is expected: grp_Y has rw access to all repositories, while grp_W and grp_X only have access to their respective repositories. What occurs: grp_Y has access to all repositories, while grp_W and grp_X have access to nothing If I flip the access ordering where I give everyone access and restrict it in each repository, it promply ignores the invalidation rule (stripping of rights) and gives everyone the access granted at the root level. Forgoing groups, it performs the same with user specific provisions; even fully defined such as: [/] a = rw b = c = d = e = f = g = rw [somerepo1:/projectPot] a = rw b = rw c = rw d = e = rw f = g = rw [somerepo2:/projectKettle] a = rw b c d = rw e = rw f = rw g Which yields the exact same result. According to the documentation I'm following all protocols so this is insane. Running on Apache2 with dav_svn

    Read the article

  • Very uneven CPU utilization with SQL Server 2012 on 2 processor computer with 16 cores / processor

    - by cooplarsh
    After installing SQL Server Enterprise 2012 with the Server + Cal license model, on a computer with 2 processors each with 16 cores (and no hyperthreading involved) and putting the server under extremely heavy load the 16 cores on the first processor were very underutilized, the first 4 cores on the 2nd CPU were heavily utilized, and the last 12 cores were not used at all (because of the 20 core limit for this sql server version). Total CPU utilization was displaying as around 25%. Unfortunately, the server suffered from extremely poor performance even though if the tasks were evenly distributed across the 20 cores it wouldn't have been anywhere near as bad. The Windows Server was running on a VMWare virtual image under ESX Server, but all of the CPU was allocated to the windows server. We tried changing affinity settings (e.g., allocating most cores to CPU and the others to I/O), but that didn't help solve the performance problems. Upgrading the product edition to SQL Server Enterprise Core 2012 not only allowed the SQL Server to utilize the 12 previously unused cores on the 2nd processor, but it also resulted in a much more even distribution of tasks across all of the processors. To get through the backlog of requests cpU utilization jumped to around 90%, and then came down to around 33% once it was caught up, but performance improved dramatically since we failed over to the newly updated version And the performance issues went away. I was wondering if anyone knows what might cause SQL Server to unevenly distribute the load, relying almost exclusively on the first 4 cores of the 2nd processor that had 12 cores idle, and allocate only a few tasks to each of the 16 cores on the first processor. Also, is there any way we could have more evenly distributed the load across the 20 cores that were being used without the product edition upgrade? The flip side of that question is what did the product upgrade do that caused SQL Server to start evenly distributing the load across all of the cores that it recognized? Thanks to any insight to answer these questions and/or links that might help me better understand how to make sense of what was happenings.

    Read the article

  • How to get a new-pssession in PowerShell to talk to my ICS-connected laptop for Remoting

    - by Scott Bilas
    If I have my laptop on the LAN, then Powershell remoting works fine from my workstation to the laptop. However, the LAN is wireless, and so sometimes I will connect on a wire to my workstation. It has two ethernet ports so I have the secondary wired up to share to the laptop using Win7's Internet Connection Sharing. (Btw I know that avoiding ICS would solve the problem, but that's not an option right now.) So my question is: what magic registry bits or command line options do I need to flip to get remoting to work to my laptop through ICS? Here's what happens when I try it: new-pssession -computername 192.168.137.161 [192.168.137.161] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed I'm having a hard time understanding the documentation for PowerShell and WinRM. I've tried messing with allowing ports in the firewall and setting TrustedHosts to * on my workstation (don't think this is a good idea on the laptop). I have no idea where to go from here, would appreciate any help.

    Read the article

  • Optimizing Disk I/O & RAID on Windows SQL Server 2005

    - by David
    I've been monitoring our SQL server for a while, and have noticed that I/O hits 100% every so often using Task Manager and Perfmon. I have normally been able to correlate this spike with SUSPENDED processes in SQL Server Management when I execute "exec sp_who2". The RAID controller is controlled by LSI MegaRAID Storage Manager. We have the following setup: System Drive (Windows) on RAID 1 with two 280GB drives SQL is on a RAID 10 (2 mirroed drives of 280GB in two different spans) This is a database that is hammered during the day, but is pretty inactive at night. The DB size is currently about 13GB, and is used by approximately 200 (and growing) users a day. I have a couple of ideas I'm toying around with: Checking for Indexes & reindexing some tables Adding an additional RAID 1 (with 2 new, smaller, HDs) and moving the SQL's Log Data File (LDF) onto the new RAID. For #2, my question is this: Would we really be increasing disk performance (IO) by moving data off of the RAID 10 onto a RAID 1? RAID 10 obviously has better performance than RAID 1. Furthermore, SQL must write to the transaction logs before writing to the database. But on the flip side, we'll be reducing both the size of the disks as well as the amount of data written to the RAID 10, which is where all of the "meat" is - thereby increasing that RAID's performance for read requests. Is there any way to find out what our current limiting factor is? (The drives vs. the RAID Controller)? If the limiting factor is the drives, then maybe adding the additional RAID 1 makes sense. But if the limiting factor is the Controller itself, then I think we're approaching this thing wrong. Finally, are we just wasting our time? Should we instead be focusing our efforts towards #1 (reindexing tables, reducing network latency where possible, etc...)?

    Read the article

  • Hard Drive that was used before not detected or accessible in Windows 7

    - by Anders
    Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

    Read the article

  • Laptop shuts down randomly without warning

    - by Robert P.
    My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

    Read the article

  • mod rewrite help

    - by Benny B
    Ok, I don't know regex very well so I used a generator to help me make a simple mod_rewrite that works. Here's my full URL https://www.huttonchase.com/prodDetails.php?id_prd=683 For testing to make sure I CAN use this, I used this: RewriteRule prodDetails/(.*)/$ /prodDetails.php?id_prd=$1 So I can use the URL http://www.huttonchase.com/prodDetails/683/ If you click it, it works but it completely messes up the relative paths. There are a few work-arounds but I want something a little different. https://www.huttonchase.com/prod_683_stainless-steel-flask I want it to see that 'prod' is going to tell it which rule it's matching, 683 is the product number that I'm looking up in the database, and I want it to just IGNORE the last part, it's there only for SEO and to make the link mean something to customers. I'm told that this should work, but it's not: RewriteRule ^prod_([^-]*)_([^-]*)$ /prodDetails.php?id_prd=$1 [L] Once I get the first one to work I'll write one for Categories: https://www.huttonchase.com/cat_11_drinkware And database driven text pages: https://www.huttonchase.com/page_44_terms-of-service BTW, I can flip around my use of dash and underscore if need be. Also, is it better to end the URLs with a slash or without? Thanks!

    Read the article

  • Is there any way to tweak / rotate mouse orientation? Any applications? Registry edits?

    - by calbar
    I've got a very frustrating issue with my new Logitech Marathon Mouse M705. It is absolutely perfect for what I need, with the exception that it tracks on an angle for some reason. What I mean is when you slide the cursor to the left, it trends upward - when you slide to the right, it trends down. Moving the cursor along a flat horizontal line is no longer a natural motion - you need to fight what I suspect is a mechanical error of some kind. Unfortunately, I've already exchanged this mouse once and tested both on different Windows 7 and Mac OS X machines - the problem continues to occur. Is there a software solution for me? I'm incredibly surprised there is no simple way to adjust the orientation... how can every mouse manufacturer possibly adjust their hardware to track to everyone's tastes? What about those who need to flip orientation a full 90 or 180 degrees? I only need to adjust mine a few degrees, but I'm sure that need has arisen as well. Anyway, I'm running the latest SetPoint drivers (6.00) on Windows 7 and there are no orientation options available. I've checked out uberOptions and the M705 isn't supported yet (with the last version update over 6 months ago). MAF Mouse instructions are a very strange series of mouse clicks to activate. This app also seems a little overkill and costs $$ (which I'm willing to pay as a last resort). Is there no universal registry value for mouse orientation? How about for SetPoint drivers specifically? I've done a simple search in regedit without any luck. An XML file somewhere? Anything?

    Read the article

  • Import data in Excel that doesn't have a row delimiter, but number of columns is known

    - by Alex B
    So i have this text file that looks something like this: Header1 Header2 Header3 Header4 A1 B1 C1 D1 A2 B2 C2 D2 and so on. When imported, I'd want the data to format itself in 4 columns. I tried the Get External Data from Text, and it successfully imports it, but it doesn't wrap it around, so it just keeps making columns for every space. I'd want it to go on the next line after 4 (in this case) elements have been added. What's the simplest way to achieve this? EDIT: My answer follows, since I'm not yet allowed to answer my own questions yet. The Excel function I needed is called indirect(). Not sure how it actually works though, so hopefully someone can help out with that, but the function call that worked for me is =INDIRECT(ADDRESS((ROW(A1)-1)*4+COLUMN(A1),1)) which i found over here: http://www.ozgrid.com/forum/showthread.php?t=101584&p=456031#post456031 Note: this required me to add the text to excel where i'd get this row full of columns, and then flip it so that i'd have a column full of rows.

    Read the article

  • How to Find Out Who Made an ISO Disk?

    - by Qwertyfshag
    If a file is saved using Microsoft word or some other type of program, you can right click on the file to find the properties, which will indicate the computer that created the file. Is there anyway to find out who created an ISO disk image on a CD or DVD? I assume that there should be no meta data on the disk because an ISO disk image should be an exact duplicate of the original. Is my assumption correct? To illustrate with an example, let's say you found a CD at a cafe or something. You decide to look at the CD with your computer. You find out that it is an "Ubuntu live CD" that was obviously created from an ISO file. Is there any way to find out who burned the CD? Or, on the flip side, let's say you were the one that burned the "Ubuntu live CD" and you lost it. Would somebody be able to know that it was you who made the CD? Can they get any info about the maker?

    Read the article

  • Conversion from YUV444 to RGB888

    - by Abhi
    I am new in this field and i desperately need some guidance from u all. I have to support yuv444 to rgb 888 in display driver module. There is one test which i have done for yv12 → rgb565 in wince 6.0 r3 which is mentioned below. //------------------------------------------------------------------------------ // // Function: PP_CSC_YV12_RGB565Test // // This function tests the Post-processor // // // // Parameters: // uiMsg // [in] Ignored. // // tpParam // [in] Ignored. // // lpFTE // [in] Ignored. // // Returns: // Specifies if the test passed (TPR_PASS), failed (TPR_FAIL), or was // skipped (TPR_SKIP). // // TESTPROCAPI PP_CSC_YV12_RGB565Test(UINT uMsg, TPPARAM tpParam, LPFUNCTION_TABLE_ENTRY lpFTE) { LogEntry(L"%d : In %s Function \r\n",++abhineet,__WFUNCTION__); UNREFERENCED_PARAMETER(tpParam); UNREFERENCED_PARAMETER(lpFTE); DWORD dwResult= TPR_SKIP; ppConfigData ppData; DWORD iInputBytesPerFrame, iOutputBytesPerFrame; UINT32 iInputStride, iOutputStride; UINT16 iOutputWidth, iOutputHeight, iOutputBPP; UINT16 iInputWidth, iInputHeight, iInputBPP; int iOption; PP_TEST_FUNCTION_ENTRY(); // Validate that the shell wants the test to run if (uMsg != TPM_EXECUTE) { return TPR_NOT_HANDLED; } PPTestInit(); iInputWidth = PP_TEST_FRAME_WIDTH; //116 iInputHeight = PP_TEST_FRAME_HEIGHT; //160 iInputBPP = PP_TEST_FRAME_BPP; //2 iInputStride = iInputWidth * 3/2; // YV12 is 12 bits per pixel iOutputWidth = PP_TEST_FRAME_WIDTH; iOutputHeight = PP_TEST_FRAME_HEIGHT; iOutputBPP = PP_TEST_FRAME_BPP; iOutputStride = iOutputWidth * iOutputBPP; // Allocate buffers for input and output frames iInputBytesPerFrame = iInputStride * iInputHeight; pInputFrameVirtAddr = (UINT32 *) AllocPhysMem(iInputBytesPerFrame, PAGE_EXECUTE_READWRITE, 0, 0, (ULONG *) &pInputFramePhysAddr); iOutputBytesPerFrame = iOutputStride * iOutputHeight; pOutputFrameVirtAddr = (UINT32 *) AllocPhysMem(iOutputBytesPerFrame, PAGE_EXECUTE_READWRITE, 0, 0, (ULONG *) &pOutputFramePhysAddr); if ((NULL == pInputFrameVirtAddr) || (NULL == pOutputFrameVirtAddr)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } //----------------------------- // Configure PP //----------------------------- // Set up post-processing configuration data memset(&ppData, 0 , sizeof(ppData)); // Set up input format and data width ppData.inputIDMAChannel.FrameFormat = icFormat_YUV420; ppData.inputIDMAChannel.DataWidth = icDataWidth_8BPP; // dummy value for YUV ppData.inputIDMAChannel.PixelFormat.component0_offset = 0; ppData.inputIDMAChannel.PixelFormat.component1_offset = 8; ppData.inputIDMAChannel.PixelFormat.component2_offset = 16; ppData.inputIDMAChannel.PixelFormat.component3_offset = 24; ppData.inputIDMAChannel.PixelFormat.component0_width = 8-1; ppData.inputIDMAChannel.PixelFormat.component1_width = 8-1; ppData.inputIDMAChannel.PixelFormat.component2_width = 8-1; ppData.inputIDMAChannel.PixelFormat.component3_width = 8-1; ppData.inputIDMAChannel.FrameSize.height = iInputHeight; ppData.inputIDMAChannel.FrameSize.width = iInputWidth; ppData.inputIDMAChannel.LineStride = iInputWidth; // Set up output format and data width ppData.outputIDMAChannel.FrameFormat = icFormat_RGB; ppData.outputIDMAChannel.DataWidth = icDataWidth_16BPP; ppData.outputIDMAChannel.PixelFormat.component0_offset = RGB_COMPONET0_OFFSET; ppData.outputIDMAChannel.PixelFormat.component1_offset = RGB_COMPONET1_OFFSET; ppData.outputIDMAChannel.PixelFormat.component2_offset = RGB_COMPONET2_OFFSET; ppData.outputIDMAChannel.PixelFormat.component3_offset = RGB_COMPONET3_OFFSET; ppData.outputIDMAChannel.PixelFormat.component0_width = RGB_COMPONET0_WIDTH -1; ppData.outputIDMAChannel.PixelFormat.component1_width = RGB_COMPONET1_WIDTH -1; ppData.outputIDMAChannel.PixelFormat.component2_width = RGB_COMPONET2_WIDTH -1; ppData.outputIDMAChannel.PixelFormat.component3_width = RGB_COMPONET3_WIDTH; ppData.outputIDMAChannel.FrameSize.height = iOutputHeight; ppData.outputIDMAChannel.FrameSize.width = iOutputWidth; ppData.outputIDMAChannel.LineStride = iOutputStride; // Set up post-processing channel CSC parameters // based on input and output ppData.CSCEquation = CSCY2R_A1; ppData.inputIDMAChannel.UBufOffset = iInputHeight * iInputWidth + (iInputHeight * iInputWidth)/4; ppData.inputIDMAChannel.VBufOffset = iInputHeight * iInputWidth; ppData.FlipRot.verticalFlip = FALSE; ppData.FlipRot.horizontalFlip = FALSE; ppData.FlipRot.rotate90 = FALSE; if (!PPConfigure(hPP, &ppData)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } //----------------------------- // Read first input buffer //----------------------------- // Read Input file for new frame if (!ReadImage(PP_TEST_YV12_FILENAME,pInputFrameVirtAddr,iInputBytesPerFrame,PP_TEST_FRAME_WIDTH,PP_TEST_FRAME_HEIGHT)) { g_pKato->Log(PP_ZONE_ERROR, (TEXT("fail to ReadImage()!\r\n"))); dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } //----------------------------- // Start PP //----------------------------- if (!PPStart(hPP)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } if (!PPInterruptEnable(hPP, FRAME_INTERRUPT)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } //----------------------------- // Queue Input/Output Buffers //----------------------------- UINT32 starttime = GetTickCount(); // Add input and output buffers to PP queues. if (!PPAddInputBuffer(hPP, (UINT32) pInputFramePhysAddr)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } if (!PPAddOutputBuffer(hPP,(UINT32) pOutputFramePhysAddr)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } if (!PPWaitForNotBusy(hPP, FRAME_INTERRUPT)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } RETAILMSG(1, (TEXT("===========FLIP TIME: %dms====== \r\n"), GetTickCount()-starttime)); //----------------------------- // Stop PP //----------------------------- if (!PPStop(hPP)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } if (!PPClearBuffers(hPP)) { dwResult = TPR_FAIL; goto PP_CSC_YV12_RGB565Test_clean_up; } ShowRGBContent((UINT8 *) pOutputFrameVirtAddr, PP_TEST_FRAME_WIDTH, PP_TEST_FRAME_HEIGHT); iOption = MessageBox( NULL,TEXT("After CSC(YV12->RGB565). Is it correct?"),TEXT("Test result"),MB_YESNO ); if ( IDNO == iOption ) { dwResult = TPR_FAIL; } else { dwResult = TPR_PASS; } PP_CSC_YV12_RGB565Test_clean_up: if(NULL != pInputFrameVirtAddr) { FreePhysMem( pInputFrameVirtAddr ); pInputFrameVirtAddr = NULL; } if(NULL != pOutputFrameVirtAddr) { FreePhysMem( pOutputFrameVirtAddr ); pOutputFrameVirtAddr = NULL; } PPTestDeInit(); LogEntry(L"%d :Out %s Function \r\n",++abhineet,__WFUNCTION__); return dwResult; } The below is the flow for this function. It tells the start and end of this test. *** vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv *** TEST STARTING *** *** Test Name: PP CSC(YV12-RGB565) Test *** Test ID: 500 *** Library Path: pp_test.dll *** Command Line: *** Kernel Mode: Yes *** Random Seed: 24421 *** Thread Count: 0 *** vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv *******Abhineet-PPTEST : 338 : In ShellProc Function *******Abhineet-PPTEST : 339 : In Debug Function PP_TEST: ShellProc(SPM_BEGIN_TEST, ...) called *******Abhineet-PPTEST : 340 :Out Debug Function BEGIN TEST: "PP CSC(YV12-RGB565) Test", Threads=0, Seed=24421 *******Abhineet-PPTEST : 341 :Out ShellProc Function *******Abhineet-PPTEST : 342 : In PP_CSC_YV12_RGB565Test Function PP_CSC_YV12_RGB565Test *******Abhineet-PPTEST : 343 : In PPTestInit Function *******Abhineet-PPTEST : 344 : In GetPanelDimensions Function *******Abhineet-PPTEST : 345 :Out GetPanelDimensions Function GetPanelDimensions: width=1024 height=768 bpp=16 *******Abhineet-PPTEST : 346 :Out PPTestInit Function *******Abhineet-PPTEST : 347 : In ReadImage Function RELFSD: Opening file flags_112x160.yv12 from desktop *******Abhineet-PPTEST : 348 :Out ReadImage Function ===========FLIP TIME: 1ms====== *******Abhineet-PPTEST : 349 : In ShowRGBContent Function *******Abhineet-PPTEST : 350 :Out ShowRGBContent Function *******Abhineet-PPTEST : 351 : In PPTestDeInit Function *******Abhineet-PPTEST : 352 :Out PPTestDeInit Function *******Abhineet-PPTEST : 353 :Out PP_CSC_YV12_RGB565Test Function *******Abhineet-PPTEST : 354 : In DllMain Function *******Abhineet-PPTEST : 355 :Out DllMain Function *******Abhineet-PPTEST : 356 : In ShellProc Function *******Abhineet-PPTEST : 357 : In Debug Function PP_TEST: ShellProc(SPM_END_TEST, ...) called *******Abhineet-PPTEST : 358 :Out Debug Function END TEST: "PP CSC(YV12-RGB565) Test", PASSED, Time=6.007 *******Abhineet-PPTEST : 359 :Out ShellProc Function *** ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ *** TEST COMPLETED *** *** Test Name: PP CSC(YV12-RGB565) Test *** Test ID: 500 *** Library Path: pp_test.dll *** Command Line: *** Kernel Mode: Yes *** Result: Passed *** Random Seed: 24421 *** Thread Count: 1 *** Execution Time: 0:00:06.007 *** ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Please help me out to make changes to the above function for yuv444-rgb888.

    Read the article

  • How to autostart this slide

    - by lchales
    Hello there: first of all i have no idea on coding or anything related, simple question: is there any simple way to tell this code to autostart the slide? at the current moment the images change on click. currently the index page only have one image, what i want is to add a few but without the need to click to see the next one here is the code from my index: <script type="text/javascript"> //<![CDATA[ /* the images preload plugin */ (function($) { $.fn.preload = function(options) { var opts = $.extend({}, $.fn.preload.defaults, options), o = $.meta ? $.extend({}, opts, this.data()) : opts; var c = this.length, l = 0; return this.each(function() { var $i = $(this); $('<img/>').load(function(i){ ++l; if(l == c) o.onComplete(); }).attr('src',$i.attr('src')); }); }; $.fn.preload.defaults = { onComplete : function(){return false;} }; })(jQuery); //]]> </script><script type="text/javascript"> //<![CDATA[ $(function() { var $tf_bg = $('#tf_bg'), $tf_bg_images = $tf_bg.find('img'), $tf_bg_img = $tf_bg_images.eq(0), $tf_thumbs = $('#tf_thumbs'), total = $tf_bg_images.length, current = 0, $tf_content_wrapper = $('#tf_content_wrapper'), $tf_next = $('#tf_next'), $tf_prev = $('#tf_prev'), $tf_loading = $('#tf_loading'); //preload the images $tf_bg_images.preload({ onComplete : function(){ $tf_loading.hide(); init(); } }); //shows the first image and initializes events function init(){ //get dimentions for the image, based on the windows size var dim = getImageDim($tf_bg_img); //set the returned values and show the image $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }).fadeIn(); //resizing the window resizes the $tf_bg_img $(window).bind('resize',function(){ var dim = getImageDim($tf_bg_img); $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }); }); //expand and fit the image to the screen $('#tf_zoom').live('click', function(){ if($tf_bg_img.is(':animated')) return false; var $this = $(this); if($this.hasClass('tf_zoom')){ resize($tf_bg_img); $this.addClass('tf_fullscreen') .removeClass('tf_zoom'); } else{ var dim = getImageDim($tf_bg_img); $tf_bg_img.animate({ width : dim.width, height : dim.height, top : dim.top, left : dim.left },350); $this.addClass('tf_zoom') .removeClass('tf_fullscreen'); } } ); //click the arrow down, scrolls down $tf_next.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('tb'); }); //click the arrow up, scrolls up $tf_prev.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('bt'); }); //mousewheel events - down / up button trigger the scroll down / up $(document).mousewheel(function(e, delta) { if($tf_bg_img.is(':animated')) return false; if(delta > 0) scroll('bt'); else scroll('tb'); return false; }); //key events - down / up button trigger the scroll down / up $(document).keydown(function(e){ if($tf_bg_img.is(':animated')) return false; switch(e.which){ case 38: scroll('bt'); break; case 40: scroll('tb'); break; } }); } //show next / prev image function scroll(dir){ //if dir is "tb" (top -> bottom) increment current, //else if "bt" decrement it current = (dir == 'tb')?current + 1:current - 1; //we want a circular slideshow, //so we need to check the limits of current if(current == total) current = 0; else if(current < 0) current = total - 1; //flip the thumb $tf_thumbs.flip({ direction : dir, speed : 400, onBefore : function(){ //the new thumb is set here var content = '<span id="tf_zoom" class="tf_zoom"><\/span>'; content +='<img src="' + $tf_bg_images.eq(current).attr('longdesc') + '" alt="Thumb' + (current+1) + '"/>'; $tf_thumbs.html(content); } }); //we get the next image var $tf_bg_img_next = $tf_bg_images.eq(current), //its dimentions dim = getImageDim($tf_bg_img_next), //the top should be one that makes the image out of the viewport //the image should be positioned up or down depending on the direction top = (dir == 'tb')?$(window).height() + 'px':-parseFloat(dim.height,10) + 'px'; //set the returned values and show the next image $tf_bg_img_next.css({ width : dim.width, height : dim.height, left : dim.left, top : top }).show(); //now slide it to the viewport $tf_bg_img_next.stop().animate({ top : dim.top },700); //we want the old image to slide in the same direction, out of the viewport var slideTo = (dir == 'tb')?-$tf_bg_img.height() + 'px':$(window).height() + 'px'; $tf_bg_img.stop().animate({ top : slideTo },700,function(){ //hide it $(this).hide(); //the $tf_bg_img is now the shown image $tf_bg_img = $tf_bg_img_next; //show the description for the new image $tf_content_wrapper.children() .eq(current) .show(); }); //hide the current description $tf_content_wrapper.children(':visible') .hide() } //animate the image to fit in the viewport function resize($img){ var w_w = $(window).width(), w_h = $(window).height(), i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h; if(i_w > i_h){ new_w = w_w; new_h = w_w * r_i; if(new_h > w_h){ new_h = w_h; new_w = w_h / r_i; } } else{ new_h = w_w * r_i; new_w = w_w; } $img.animate({ width : new_w + 'px', height : new_h + 'px', top : '0px', left : '0px' },350); } //get dimentions of the image, //in order to make it full size and centered function getImageDim($img){ var w_w = $(window).width(), w_h = $(window).height(), r_w = w_h / w_w, i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h, new_left,new_top; if(r_w > r_i){ new_h = w_h; new_w = w_h / r_i; } else{ new_h = w_w * r_i; new_w = w_w; } return { width : new_w + 'px', height : new_h + 'px', left : (w_w - new_w) / 2 + 'px', top : (w_h - new_h) / 2 + 'px' }; } }); //]]> </script>

    Read the article

  • Binding TabControl ItemsSource to an ObservableCollection of ViewModels causes content to refresh on

    - by Brent
    I'm creating an WPF application using the MVVM framework, and I've adopted several features from Josh Smith's article on MVVM here... Most importantly, I'm binding a TabControl to an ObservableCollection of ViewModels. This means that am using a tabbed MDI interface that displays a UserControl as the content of a TabItem. The issue I'm seeing in my application is that when I have several tabs and I flip back and forth between tabs, the content is being refersh each time I change tabs. If you download Josh Smith's source code, you'll see that his app has the same problem. For example, click on the "View All Customers" button and scroll down to the bottom the ListView. Next click on the "Create New Customer" button. When you switch back to the All Customer view you'll notice that the ListView scrolls back to the top. If you switch back to the New Customer tab and place your cursor in one of the TextBoxes, then switch to All Customers tab and back, you'll notice that the cursor is now gone. I imagine that this is because I'm using an ObservableCollection, but I can't be sure. Is there any way to prevent the tab's content from refreshing when it receives the focus? EDIT: I found my problem when I ran the profiler on my application. I'm defining a DataTemplate for my ViewModels so it knows how to render the ViewModel when it is displayed in the tab... like so: <DataTemplate DataType="{x:Type vm:CustomerViewModel}"> <vw:CustomerView/> </DataTemplate> So whenever I switch to a different tab, it has to re-create the ViewModel again. I fixed it temporarily by changing my ObservableCollection of ViewModels to an ObservableCollection of UserControls. However, I would really still like to use DataTemplates if possible. Is there a way to make a DataTemplate work?

    Read the article

  • Web application development platform recommendation

    - by TK.Maxi
    Hi all I did a year's worth of Pascal, Visual Basic and C++ 15 years ago, so suffice it to say that I'm a complete n00b & lamer when it comes to this. I really do hope that this question doesn't canned, but if it does, please be so kind as to point me in the direction of where it should be posted. I have an idea, like so many others, for a web app. I don't necessarily have the capital to outsource the development of the app right now, and I probably wouldn't want to, since non-disclosure agreements can be expensive to enforce, especially in this day and age of intercontinental outsourcing. I need the app to be usable on any mobile device (eventually), primarily on the major mobile platforms at first, on the web, (pc/mac/*ix) obviously, on mobile web browsers like opera mobile, etc. I envisage the app interacting with the major social networks like fb, orkut, msn im, twitter, et al in a way where friend's are messaged and/or wall posted, a message is posted to the users wall. Geo-location functionality is a plus, considering the service/app can be location sensitive in two ways, 1, the immediate location of the user, 2. the desired location of the user. I'd like to incorporate OpenID sign on, and the flip-side, the service will require that people (service providers) list their specialities/specialisations/interests/areas of expertise, so that matches to user requests can be made by the service, while users' requests are posted into the web universe. I've probably described a glut of apps out there, but I'd appreciate feedback on the sort of platform that I should look at using, be it hosted on something like Google's app engine, or written in android friendly code, or whatever. I'm a firm believer in herd mentality, especially at the start of a project that I have very little experience in. The more opinions, the merrier! I can't get very much more specific, since that would give the idea away. Thanks for your time and I look forward to hearing from wise and experienced and the fresh and innovative alike. Thanks

    Read the article

  • Binding TabControl ItemsSource to an ObservableCollection causes content to refresh on focus

    - by Brent
    I'm creating an WPF application using the MVVM framework, and I've adopted several features from Josh Smith's article on MVVM here... Most importantly, I'm binding a TabControl to an ObservableCollection of ViewModels. This means that am using a tabbed MDI interface that displays a UserControl as the content of a TabItem. The issue I'm seeing in my application is that when I have several tabs and I flip back and forth between tabs, the content is being refersh each time I change tabs. If you download Josh Smith's source code, you'll see that his app has the same problem. For example, click on the "View All Customers" button and scroll down to the bottom the ListView. Next click on the "Create New Customer" button. When you switch back to the All Customer view you'll notice that the ListView scrolls back to the top. If you switch back to the New Customer tab and place your cursor in one of the TextBoxes, then switch to All Customers tab and back, you'll notice that the cursor is now gone. I imagine that this is because I'm using an ObservableCollection, but I can't be sure. Is there any way to prevent the tab's content from refreshing when it receives the focus?

    Read the article

  • CGBitmapContextCreate issue while trying to resize images

    - by Jeff
    Hello! I'm running into an issue when I try to create a CGContextRef while attempting to resize some images: There are the errors Sun May 16 20:07:18 new-host.home app [7406] <Error>: Unable to create bitmap delegate device Sun May 16 20:07:18 new-host.home app [7406] <Error>: createBitmapContext: failed to create delegate. My code looks like this - (UIImage*) resizeImage:(UIImage*)originalImage withSize:(CGSize)newSize { CGSize originalSize = originalImage.size; CGFloat originalAspectRatio = originalSize.width / originalSize.height; CGImageRef cgImage = nil; int bitmapWidth = newSize.width; int bitmapHeight = newSize.height; CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB(); CGContextRef context = CGBitmapContextCreate(nil, bitmapWidth, bitmapHeight, 8, bitmapWidth * 4, colorspace, kCGImageAlphaPremultipliedLast); if (context != nil) { // Flip the coordinate system //CGContextScaleCTM(context, 1.0, -1.0); //CGContextTranslateCTM(context, 0.0, -bitmapHeight); // Black background CGRect rect = CGRectMake(0, 0, bitmapWidth, bitmapHeight); CGContextSetRGBFillColor (context, 0, 0, 0, 1); CGContextFillRect (context, rect); // Resize box to maintain aspect ratio if (originalAspectRatio < 1.0) { rect.origin.y += (rect.size.height - rect.size.width / originalAspectRatio) * 0.5; rect.size.height = rect.size.width / originalAspectRatio; } else { rect.origin.x += (rect.size.width - rect.size.height * originalAspectRatio) * 0.5; rect.size.width = rect.size.height * originalAspectRatio; } CGContextSetInterpolationQuality(context, kCGInterpolationHigh); // Draw image CGContextDrawImage (context, rect, [originalImage CGImage]); // Get image cgImage = CGBitmapContextCreateImage (context); // Release context CGContextRelease(context); } CGColorSpaceRelease(colorspace); UIImage *result = [UIImage imageWithCGImage:cgImage]; CGImageRelease (cgImage); return result; }

    Read the article

  • Perf: Viewing thousands of images in Silverlight 3 on a 3D Wall

    - by Bob Holland
    I currently work on a very cool Silverlight app that displays photos in a 3D wall space like the Wall3D demo that is thrown in with Blend 3. The problem I am currently facing is performance. The app works like this: As you scroll right or left the 3d photo wall rotates As each movement is made, the next column of photos are downloaded, decoded into a BitmapImage and thrown into a 3D Wall Node. As you can imagine users (if you let them) will want to flip through the photos really quickly, but the problem I have is I cannot display the photos quick enough. In most cases it's a beautiful app that works really well, but when an album contains over 300 photos, you can imagine the sort of memory taken up by all the BitmapImage classes and how moving the slider can jump from photo 20 to photo 120 in a second. Of course we have algorithms in place to not download every photo in between, but I still can't work out a fast way to get the photos displayed. It may be a case that we need to throw away the 'great for show' 3D wall and go to a flat DeepZoom like wall like the Playboy archive one that Vertigo did. Still not sure, let me know your thoughts. P.S. We are using Kit3D for all the 3D work, it's using PerspectiveCamera, Model3DGroup, ModelVisual3D, RotateTransform3D & TranslateTransform3D. Cheers, Bob.

    Read the article

  • iPhone: CoreGraphics and memory management

    - by carloe
    Can someone tell me what I am doing wrong here? I use this method to flip through pages in a PDF. But something in the code seems to not be released properly because every-time I pull a PDF page that contains an image my memory footprint increases. I am fairly new to CoreGraphics, and can't for the life of me figure out where this method would leak memory. -(UIImage *)pageAtIndex:(NSInteger)pageNumber withWidth:(CGFloat)width andHeight:(CGFloat)height { if((pageNumber>0) && (pageNumber<=pageCount)) { CGFloat scaleRatio; // multiplier by which the PDF Page will be scaled UIGraphicsBeginImageContext(CGSizeMake(width, height)); CGContextRef context = UIGraphicsGetCurrentContext(); CGPDFPageRef page = CGPDFDocumentGetPage(pdf, pageNumber); CGRect pageRect = CGPDFPageGetBoxRect(page, kCGPDFBleedBox); //Figure out the orientation of the PDF page and set the scaleRatio accordingly if(pageRect.size.width/pageRect.size.height < 1.0) { scaleRatio = height/pageRect.size.height; } else { scaleRatio = width/pageRect.size.width; } //Calculate the offset to center the image CGFloat xOffset = 0.0; CGFloat yOffset = height; if(pageRect.size.width*scaleRatio<width) { xOffset = (width/2)-(pageRect.size.width*scaleRatio/2); } else { yOffset = height-((height/2)-(pageRect.size.height*scaleRatio/2)); } CGContextTranslateCTM(context, xOffset, yOffset); CGContextScaleCTM(context, 1.0, -1.0); CGContextSaveGState(context); CGAffineTransform pdfTransform = CGPDFPageGetDrawingTransform(page, kCGPDFBleedBox, CGRectMake(0, 0, pageRect.size.width, pageRect.size.height), 0, true); pdfTransform = CGAffineTransformScale(pdfTransform, scaleRatio, scaleRatio); CGContextConcatCTM(context, pdfTransform); CGContextDrawPDFPage(context, page); UIImage *tempImage = [UIGraphicsGetImageFromCurrentImageContext() retain]; CGContextRestoreGState(context); UIGraphicsEndPDFContext(); UIGraphicsEndImageContext(); return tempImage; } return nil; }

    Read the article

  • Getting an Error Trying to Create an Object in Python

    - by Nick Rogers
    I am trying to create an object from a class in python but I am getting an Error, "e_tank = EnemyTank() TypeError: 'Group' object is not callable" I am not sure what this means, I have tried Google but I couldn't get a clear answer on what is causing this error. Does anyone understand why I am unable to create an object from my EnemyTank Class? Here is my code: #Image Variables bg = 'bg.jpg' bunk = 'bunker.png' enemytank = 'enemy-tank.png' #Import Pygame Modules import pygame, sys from pygame.locals import * #Initializing the Screen pygame.init() screen = pygame.display.set_mode((640,360), 0, 32) background = pygame.image.load(bg).convert() bunker_x, bunker_y = (160,0) class EnemyTank(pygame.sprite.Sprite): e_tank = pygame.image.load(enemytank).convert_alpha() def __init__(self, startpos): pygame.sprite.Sprite.__init__(self, self.groups) self.pos = startpos self.image = EnemyTank.image self.rect = self.image.get_rect() def update(self): self.rect.center = self.pos class Bunker(pygame.sprite.Sprite): bunker = pygame.image.load(bunk).convert_alpha() def __init__(self, startpos): pygame.spriter.Sprite.__init__(self, self.groups) self.pos = startpos self.image = Bunker.image self.rect = self.image.get_rect() def getCollisionObjects(self, EnemyTank): if (EnemyTank not in self._allgroup, False): return False self._allgroup.remove(EnemyTank) result = pygame.sprite.spritecollide(EnemyTank, self._allgroup, False) self._allgroup.add(EnemyTank) def update(self): self.rect.center = self.pos #Setting Up The Animation x = 0 clock = pygame.time.Clock() speed = 250 allgroup = pygame.sprite.Group() EnemyTank = allgroup Bunker = allgroup e_tank = EnemyTank() bunker = Bunker()5 #Main Loop while True: for event in pygame.event.get(): if event.type == QUIT: pygame.quit() sys.exit() screen.blit(background, (0,0)) screen.blit(bunker, (bunker_x, bunker_y)) screen.blit(e_tank, (x, 0)) pygame.display.flip() #Animation milli = clock.tick() seconds = milli/1000. dm = seconds*speed x += dm if x>640: x=0 #Update the Screen pygame.display.update()

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >