Search Results

Search found 452 results on 19 pages for 'inbound'.

Page 17/19 | < Previous Page | 13 14 15 16 17 18 19  | Next Page >

• Can't connect to shared folders anymore?

  - by HuskyHuskie

  My home server is running Windows Server 2008 R2. I've had it running for almost a year now without any issues with shared folders. This past week I had an issue with my modem which required it to be power cycled and with that I power cycled my router. After that I haven't been able to connect to my shared network folders. I have no idea why that would even cause an issue as I've power cycled my networking equipment in the past without issues and none of my settings appear to have been lost. I am mapping these drives on my Windows 7 Ultimate machine using "Map Network Drive", from there I enter \\SERVER\Storage as I'm trying to connect to my shared folder named Storage. I receive the following error every time I try mapping the drive: Windows cannot access \\Server\Storage Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Details: Error code: 0x80070035 The network path was not found. When I click Diagnose I get the following: Problems found file and print sharing resource (SERVER) is online but isn't responding to connection attempts. The remote computer isn't responding to connection on port 445, possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldn't find any problems with the firewall on your computer. I've tried this from multiple computers with the same issue too. To resolve the problems so far I've tried: Disabling the firewall on SERVER Reinstalling File Services Modifying NetBT\Parameters registry values Adding a custom inbound rule for port 445 Adding port forwarding on my router for port 445 Recreating the shared folders Checking and rechecking the shared folder permissions. Resetting my user account password on the server used to access the shared folder. I'm pulling my hair out with this problem mainly because it came out of nowhere. It was working fine the night before and the next day it just stopped working. Any ideas of what I could try next are much appreciated. It should also be noted that this server is used as a web server too and that functionality still works correctly.

  Read the article

• "Error 1067: The process terminated unexpectedly" when trying to install MySQL on Win7 x64.

  - by Gravitas

  Hi, I've run into a brick wall trying to install MySQL v5.5 on my machine. My PC is Windows 7 x64, Enterprise edition. MySQL installs fine, but when I run the "MySQL Instance Configuration Wizard", it pauses forever on the step "Start Service" (I can let it run for 30 minutes with no response). If I go into services, I see that the "MySQL" service hasn't started, and if I try to start it, it says "Windows could not start MySQL Service on Local Computer. Error 1067: The process terminated unexpectedly." I've tried the following: Turning off firewall. Uninstalling all antivirus software. Installing / reinstalling 32-bit version of MySQL. Installing / reinstalling 64-bit version of MySQL. Uninstalling, deleting the contents of "C:\program files\MySQL" and "C:\program files (x86)\MySQL", reinstalling. Checking to see that there is no rogue services named MySQL???? (from a previous install). Checking that port 3306 is not used by an alternate program. Changing the default port that MySQL uses. Checking for "my.ini" and "my.ini.cnf" in "C:\windows" (nothing there but that can cause a problem). Running both MySQL installer, and configuration wizard, in "Adminstrator mode". Turning off UAC. Installing with defaults, not changing anything. Rebooting my machine (about 6 reboots so far). Opening up port 3306 in the firewall (both TCP and UDP, inbound and outbound). Swearing at the klutz of a programmer who designed MySQL so you can't even install it (as if that would help!) My machine is working 100% in every other way. InfiniDB (a MySQL compatible database) installs 100%, as does Visual Studio 2010, Microsoft SQL Server, etc, etc. Your advice on how to work around this? p.s. Here is the screen it got stuck on for 15 minutes until I killed the process: Update 2010-12-20 Tried MySQL v5.1, it didn't work either. Its amazing - if you type "mysqld /?", or "mysqld -help", it doesn't give you any help. And, if you try to restart the service manually, it doesn't display any error messages. Could it be any more unhelpful? Update 2010-12-21 Installed MySQL 6.0 alpha, and it worked. However, I'd rather not use an alpha release, given that the "stable" release is anything but :( Update 2010-12-21 Found http://dev.mysql.com/doc/refman/5.1/en/windows-troubleshooting.html, dealing with troubleshooting under Windows. Discovered that you can generate an error log if the service doesn't start - see here: http://dev.mysql.com/doc/refman/5.1/en/error-log.html

  Read the article

• mixing different technologies using ARR reverse proxy

  - by Jaepetto

  I'm currently trying to put together a proof of concept on mixing various technologies onto one web site in order to ease migrations and add flexibility. The idea is to create one 'mashup' site behind an IIS 7.5 ARR reverse proxy. For the time being the ARR reverse proxy forwards all request to our main site. The request are as follow: client -> ARR: Get / ARR -> Server 1: Get / Server 1 -> ARR: 200: /index.htm ARR -> client: 200: /index.htm ...so far so good. Let's say, I want to add a new site (root of another server) as a subsite of my main website. a simple inbound rule does the trick: <rule name="sub1" stopProcessing="true"> <match url="^mySubsite(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false" /> <action type="Rewrite" url="http://server2/{R:1}" /> </rule> The requests now are: client -> ARR: Get /mySubsite ARR -> Server 2: Get / Server 2 -> ARR: 200: /index.htm ARR -> client: 200: /index.htm ... still ok. The issue comes when the site on server2 sends a redirection (e.g. to a login page). In the case of SharePoint, it will redirect the user to: /_layouts/Authenticate.aspx?Source=%2F ...which does not exists: client -> ARR: Get /mySubsite ARR -> Server 2: Get / Server 2 -> ARR: 301: /_layouts/Authenticate.aspx?Source=%2F ARR -> client: 301: /_layouts/Authenticate.aspx?Source=%2F client -> ARR: Get /_layouts/Authenticate.aspx?Source=%2F ARR -> client: 404: Not Found Does anyone know a way write the outbound rule to rewrite the response from server 2 "301: /_layouts/Authenticate.aspx?Source=%2F" to "301: /mySubsite/_layouts/Authenticate.aspx?Source=%2FmySubsite%2F"?

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Subdomains, folders, internationalization, and hosting solutions

  - by justinbach

  I'm a web developer and I recently landed a gig to develop the US / international version of a site for a company that's big in Europe but hasn't done much expansion into the US yet. They've got an existing site at company.com, which should remain visible to European customers after the new site goes up, and an existing (not great) site at company.us, which I'm going to be redeveloping (the .us site will be taken down when my version goes up--keep reading for details). My solution needs to take into account the fact that there are going to be new, localized versions of the site in the fairly near future, so the framework I'm writing needs to be able to handle localizations fairly easily (dynamically load language packs, etc). The tricky thing is the European branch of the company manages the .com site hosting (IIS-based) and the DNS, while I'll be managing the US hosting (and future localizations), which will likely be apache-based. I've never been a big fan of the ".us" TLD--I think most US users are accustomed to visiting the .com--so the thought is that the European branch will detect the IP of inbound traffic and redirect all US-based addresses to us.example.com (or whatever the appropriate localized subdomain might be), which would point to the IP address of my host. I'd then serve the appropriate locale-specific content by pulling the subdomain from the $_SERVER superglobal (assuming PHP). I couldn't find any examples of international organizations that take a subdomain-based approach for localization, but I'm not sure I have any other options as a result of the unique hosting structure here (in that there's not a unified hosting solution for the European and US sites). In my experience, the US version of an international site would live at domain.com/us, not at us.domain.com, and I'd imagine that this has to do with SEO (subdomains are treated as separate sites, so improved rankings for the US site wouldn't help the Canadian version if subdomains are used to differentiate between them). My question is: is there a better approach to solving this problem than the one I'm taking? Ideally, I'd like to use a folder-based approach (see adidas.com as an example of what I'm talking about), but I'm not sure that's a possibility given that the US site (and other localizations) will not be hosted on the same server as the rest of the .com. Can you, in IIS, map a folder (e.g. domain.com/us) to a different IP address? What would you recommend? Thanks for your consideration.

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• UCM 11g is 4 days old!

  - by kyle.hatlestad

  Ok...so I missed posting a blog entry when UCM 11g and the entire ECM suite released on Tuesday. Hopefully you've already seen the announcements on any number of the Oracle ECM blogs out there such as ECM Alerts, Fusion ECM, bex huff, or C4. So I won't bore you with the same talking points like 179 million check-ins per day or 124 web site page hits per second. Instead, I thought I'd show some screenshots of the new features in UCM and URM 11g. WebLogic Server and Enterprise Manager So probably the biggest change in 11g is UCM and URM now run on top of the WebLogic Server application server. This is a huge step as ECM is now on a standard platform with the rest of Oracle Fusion Middleware which makes installation, configuration, and integration consistent among all the products. From a feature perspective, it's also beneficial because it's now integrated with Oracle Enterprise Manager. Enterprise Manager provides a lot of provisioning control over servers as well as performance monitoring and access to logs and debugging information. Desktop Integration Suite Desktop Integration Suite got a complete overhaul for 11g. It exposes a lot more features within Windows Explorer such as saved searches, workflow queue, and checked-out items. It also now support metadata pop-up screens to let users fill in additional metadata when they drag-n-drop files in! And the integration within Office applications has changed significantly by introducing a dedicated UCM menu to do open, save, compare, etc. Site Studio for External Applications In UCM Site Studio 10gR4, a major architectural shift was introduced which brought several new objects such as elements, region definitions, region templates, and placeholder definitions. This truly separated the content from the display and from the definition. It also allowed separation of the content from needing to be rendered on a complete Site Studio page. Well, the new Site Studio for External Applications takes advantage of that architecture and introduces pre-built tags and plug-ins to JDeveloper to allow to go from simply adding a content area to your web application page to building an entire web site, just like you would have done in Site Studio Designer. In addition to these changes, enhancements to the core Site Studio have been added as well. One of the big ones is called Designer Mode which allows power-users to bypass the standard rules defined by the placeholder definition or template and perform any number of additional actions. This reduces the need to go back to Site Studio Designer or JDeveloper to make more advanced changes to the site. Dashboards As part of the updated records management functionality in both UCM and URM, users can now set a dashboard view on their home page to surface common functions in a single view. It has pre-built "portlets" users can choose from to display and organize they way they want. Behind the scenes, these dashboards are stored as Content Folios. So the dashboards themselves are content items that can be revisioned and shared between users. And new dashboard portlets can be easily added (like the User Profile one in the screenshots) by getting a copy of an existing one, modifying the display, and then checking it in as a new one to select from. URM Interface Enhancements URM includes several new UI and usability enhancements in 11g. There is a new view for physical records, a place to configure "favorite" items to quickly get to, and new placement of the records management menu. BI Publisher Reports Records management in UCM and URM now offer reports generated through embedded BI Publisher. Templates are controlled by rich text files checked directly into the repository, so they can be easily modified. Other Features A new Inbound Refinery conversion option is available that does native Microsoft Office HTML conversion. If your IBR is on Windows and you have the native applications loaded, the IBR can use them to produce HTML. A new GUI template editor for Dynamic Converter is available. It's written in Java so is available through all the supported browsers and platforms. The original ActiveX based editor is also still available. The Component Manager interface has changed to help provide an easier and more descriptive way to enable core components that are installed along with UCM. All of the supported components are immediately available to turn on and do not have to be installed separately as in previous versions. My Downloads is located in the My Content Server menu and provides for easy download of client installs including Desktop Integration Suite and Site Studio Designer. Well, hopefully that gives you a taste for some of the new things in 11g. We're all pretty excited here at Oracle about all the new changes and enhancements. Over the next few months I hope to highlight some of these features more in-depth, so keep your eye out for those posts.

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>”. This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks”. By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". Carl Dacosta ASP.NET QA Team

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>” This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks” /> By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH".

  Read the article

• Configure Oracle SOA JMSAdatper to Work with WLS JMS Topics

  - by fip

  The WebLogic JMS Topic are typically running in a WLS cluster. So as your SOA composites that receive these Topic messages. In some situation, the two clusters are the same while in others they are sepearate. The composites in SOA cluster are subscribers to the JMS Topic in WebLogic cluster. As nature of JMS Topic is meant to distribute the same copy of messages to all its subscribers, two questions arise immediately when it comes to load balancing the JMS Topic messages against the SOA composites: How to assure all of the SOA cluster members receive different messages instead of the same (duplicate) messages, even though the SOA cluster members are all subscribers to the Topic? How to make sure the messages are evenly distributed (load balanced) to SOA cluster members? Here we will walk through how to configure the JMS Topic, the JmsAdapter connection factory, as well as the composite so that the JMS Topic messages will be evenly distributed to same composite running off different SOA cluster nodes without causing duplication. 2. The typical configuration In this typical configuration, we achieve the load balancing of JMS Topic messages to JmsAdapters by configuring a partitioned distributed topic along with sharable subscriptions. You can reference the documentation for explanation of PDT. And this blog posting does a very good job to visually explain how this combination of configurations would message load balancing among clients of JMS Topics. Our job is to apply this configuration in the context of SOA JMS Adapters. To do so would involve the following steps: Step A. Configure JMS Topic to be UDD and PDT, at the WebLogic cluster that house the JMS Topic Step B. Configure JCA Connection Factory with proper ServerProperties at the SOA cluster Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) Here are more details of each step: Step A. Configure JMS Topic to be UDD and PDT, You do this at the WebLogic cluster that house the JMS Topic. You can follow the instructions at Administration Console Online Help to create a Uniform Distributed Topic. If you use WebLogic Console, then at the same administration screen you can specify "Distribution Type" to be "Uniform", and the Forwarding policy to "Partitioned", which would make the JMS Topic Uniform Distributed Destination and a Partitioned Distributed Topic, respectively Step B: Configure ServerProperties of JCA Connection Factory You do this step at the SOA cluster. This step is to make the JmsAdapter that connect to the JMS Topic through this JCA Connection Factory as a certain type of "client". When you configure the JCA Connection Factory for the JmsAdapter, you define the list of properties in FactoryProperties field, in a semi colon separated list: ClientID=myClient;ClientIDPolicy=UNRESTRICTED;SubscriptionSharingPolicy=SHARABLE;TopicMessageDistributionAll=false You can refer to Chapter 8.4.10 Accessing Distributed Destinations (Queues and Topics) on the WebLogic Server JMS of the Adapter User Guide for the meaning of these properties. Please note: Except for ClientID, other properties such as the ClientIDPolicy=UNRESTRICTED, SubscriptionSharingPolicy=SHARABLE and TopicMessageDistributionAll=false are all default settings for the JmsAdapter's connection factory. Therefore you do NOT have to explicitly specify them explicitly. All you need to do is the specify the ClientID. The ClientID is different from the subscriber ID that we are to discuss in the later steps. To make it simple, you just need to remember you need to specify the client ID and make it unique per connection factory. Here is the example setting: Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) In the following example, the value 'MySubscriberID-1' was given as the value of property 'DurableSubscriber': <adapter-config name="subscribe" adapter="JMS Adapter" wsdlLocation="subscribe.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata"> <connection-factory location="eis/wls/MyTestUDDTopic" UIJmsProvider="WLSJMS" UIConnectionName="ateam-hq24b"/> <endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message"> <activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec"> <property name="DurableSubscriber" value="MySubscriberID-1"/> <property name="PayloadType" value="TextMessage"/> <property name="UseMessageListener" value="false"/> <property name="DestinationName" value="jms/MyTestUDDTopic"/> </activation-spec> </endpoint-activation> </adapter-config> You can set the durable subscriber name either at composite's JmsAdapter wizard,or by directly editing the JmsAdapter's *.jca file within the Composite project. 2.The "atypical" configurations: For some systems, there may be restrictions that do not allow the afore mentioned "typical" configurations be applied. For examples, some deployments may be required to configure the JMS Topic to be Replicated Distributed Topic rather than Partition Distributed Topic. We would like to discuss those scenarios here: Configuration A: The JMS Topic is NOT PDT In this case, you need to define the message selector 'NOT JMS_WL_DDForwarded' in the adapter's *.jca file, to filter out those "replicated" messages. Configuration B. The ClientIDPolicy=RESTRICTED In this case, you need separate factories for different composites. More accurately, you need separate factories for different *.jca file of JmsAdapter. References: Managing Durable Subscription WebLogic JMS Partitioned Distributed Topics and Shared Subscriptions JMS Troubleshooting: Configuring JMS Message Logging: Advanced Programming with Distributed Destinations Using the JMS Destination Availability Helper API

  Read the article

• Allowing Access to HttpContext in WCF REST Services

  - by Rick Strahl

  If you’re building WCF REST Services you may find that WCF’s OperationContext, which provides some amount of access to Http headers on inbound and outbound messages, is pretty limited in that it doesn’t provide access to everything and sometimes in a not so convenient manner. For example accessing query string parameters explicitly is pretty painful: [OperationContract] [WebGet] public string HelloWorld() { var properties = OperationContext.Current.IncomingMessageProperties; var property = properties[HttpRequestMessageProperty.Name] as HttpRequestMessageProperty; string queryString = property.QueryString; var name = StringUtils.GetUrlEncodedKey(queryString,"Name"); return "Hello World " + name; } And that doesn’t account for the logic in GetUrlEncodedKey to retrieve the querystring value. It’s a heck of a lot easier to just do this: [OperationContract] [WebGet] public string HelloWorld() { var name = HttpContext.Current.Request.QueryString["Name"] ?? string.Empty; return "Hello World " + name; } Ok, so if you follow the REST guidelines for WCF REST you shouldn’t have to rely on reading query string parameters manually but instead rely on routing logic, but you know what: WCF REST is a PITA anyway and anything to make things a little easier is welcome. To enable the second scenario there are a couple of steps that you have to take on your service implementation and the configuration file. Add aspNetCompatibiltyEnabled in web.config Fist you need to configure the hosting environment to support ASP.NET when running WCF Service requests. This ensures that the ASP.NET pipeline is fired up and configured for every incoming request. <system.serviceModel>     <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> </system.serviceModel> Markup your Service Implementation with AspNetCompatibilityRequirements Attribute Next you have to mark up the Service Implementation – not the contract if you’re using a separate interface!!! – with the AspNetCompatibilityRequirements attribute: [ServiceContract(Namespace = "RateTestService")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class RestRateTestProxyService Typically you’ll want to use Allowed as the preferred option. The other options are NotAllowed and Required. Allowed will let the service run if the web.config attribute is not set. Required has to have it set. All these settings determine whether an ASP.NET host AppDomain is used for requests. Once Allowed or Required has been set on the implemented class you can make use of the ASP.NET HttpContext object. When I allow for ASP.NET compatibility in my WCF services I typically add a property that exposes the Context and Request objects a little more conveniently: public HttpContext Context { get { return HttpContext.Current; } } public HttpRequest Request { get { return HttpContext.Current.Request; } } While you can also access the Response object and write raw data to it and manipulate headers THAT is probably not such a good idea as both your code and WCF will end up writing into the output stream. However it might be useful in some situations where you need to take over output generation completely and return something completely custom. Remember though that WCF REST DOES actually support that as well with Stream responses that essentially allow you to return any kind of data to the client so using Response should really never be necessary. Should you or shouldn’t you? WCF purists will tell you never to muck with the platform specific features or the underlying protocol, and if you can avoid it you definitely should avoid it. Querystring management in particular can be handled largely with Url Routing, but there are exceptions of course. Try to use what WCF natively provides – if possible as it makes the code more portable. For example, if you do enable ASP.NET Compatibility you won’t be able to self host a WCF REST service. At the same time realize that especially in WCF REST there are number of big holes or access to some features are a royal pain and so it’s not unreasonable to access the HttpContext directly especially if it’s only for read-only access. Since everything in REST works of URLS and the HTTP protocol more control and easier access to HTTP features is a key requirement to building flexible services. It looks like vNext of the WCF REST stuff will feature many improvements along these lines with much deeper native HTTP support that is often so useful in REST applications along with much more extensibility that allows for customization of the inputs and outputs as data goes through the request pipeline. I’m looking forward to this stuff as WCF REST as it exists today still is a royal pain (in fact I’m struggling with a mysterious version conflict/crashing error on my machine that I have not been able to resolve – grrrr…).© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  AJAX  WCF  

  Read the article

• Running a Mongo Replica Set on Azure VM Roles

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

  Read the article

• Certify August Updates

  - by Sadia2

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We have added some release and platform certifications to MOS Certify. Applications : Oracle Demantra Demand Management 7.3.1.5, Oracle Demantra Predictive Trade Planning 7.3.1.5, Oracle Demantra Sales and Operations Planning 7.3.1.5 Database: Oracle Database Client 12.1.0.1.0 11.2.0.4.0, Oracle Clusterware 11.2.0.4.0, Oracle Database 11.2.0.4.0, Oracle Real Application Clusters 11.2.0.4.0 E-Business Suite: Oracle E-Business Suite 12.1.3, Oracle E-Business Suite 12.1.2, Oracle E-Business Suite 12.1.1, Oracle E-Business Suite 12.0.6, Oracle E-Business Suite 11.5.10.2 Edge Applications: Oracle Transportation Management 6.3.2 Enterprise Manager: Oracle Application Management Pack for Oracle E-Business Suite 12.1.0.1.0 Fusion Middleware: Discoverer Administrator 11.1.1.6.0, Discoverer Desktop 11.1.1.6.0, Forms Builder 11.1.1.6.0, Oracle Application Development Framework 11.1.1.6.0, Oracle Application Development Runtime 11.1.1.6.0, Oracle Business Intelligence Publisher 11.1.1.6.0, Oracle Directory Services Manager 11.1.1.6.0, Oracle Forms 11.1.1.6.0, Oracle GoldenGate 11.1.1.1.0, 11.1.1.1.2, 11.1.1.1.1, Oracle GoldenGate Application Adapters 11.1.1.1.1, Oracle Identity and Access Management 11.1.2.0.0, 11.1.2.1.0, Oracle Identity Federation 11.1.1.6.0, Oracle Real-Time Decision Load Generator 11.1.1.7.0, Oracle Real-Time Decision Studio 11.1.1.7.0, Oracle Real-Time Decisions 11.1.1.6.0, Oracle Reports 11.1.1.6.0, Oracle Segmentation Server 11.1.1.6.0, Oracle Virtual Directory 11.1.1.6.0, Oracle Web Cache 11.1.1.6.0, Oracle WebCenter Content Imaging 11.1.1.8.0, Oracle WebCenter Content Inbound Refinery Server 11.1.1.8.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Enterprise Capture 11.1.1.8.0, Oracle WebCenter Portal 11.1.1.8.0, Oracle WebCenter Sites 11.1.1.8.0, Oracle WebCenter Sites: CIP for EMC Documentum 11.1.1.8.0, Oracle WebCenter Sites: CIP for File Systems and MS SharePoint 11.1.1.8.0, Oracle WebCenter Sites: Community-Gadgets 11.1.1.8.0, Oracle WebCenter Sites: Explorer 11.1.1.8.0, Oracle WebCenter Universal Content Management 11.1.1.8.0, Reports Builder 11.1.1.6.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Sites: Developer Tools 11.1.1.8.0 FSGBU Insurance Group : Oracle Health Insurance Claims 2.13.3.0.0, 2.13.2.0.0, 2.13.1.0.0 JD Edwards EnterpriseOne: JD Edwards EnterpriseOne Tools 9.1.3.0, 9.1.2.0, 9.1.0.0 JD Edwards World: JD Edwards World Service Enablement A93SE, A931SE PeopleSoft: PeopleSoft PeopleTools 8.52 Siebel Enterprise: Siebel Application Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel CRM Desktop Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Database Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel HI Web Client 8.2.2.2.0, 8.1.1.9.0, Siebel Gateway Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Outlook Add-in Client 8.2.2.2.0, Siebel Remote Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Tools Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Web Server Extension 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Cloud to On-Premise Connectivity Patterns

  - by Rajesh Raheja

  Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

  Read the article

• Cloud to On-Premise Connectivity Patterns

  - by Rajesh Raheja

  Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

  Read the article

• Concurrency Utilities for Java EE Early Draft (JSR 236)

  - by arungupta

  Concurrency Utilities for Java EE is being worked as JSR 236 and has released an Early Draft. It provides concurrency capabilities to Java EE application components without compromising container integrity. Simple (common) and advanced concurrency patterns are easily supported without sacrificing usability. Using Java SE concurrency utilities such as java.util.concurrent API, java.lang.Thread and java.util.Timer in a Java EE application component such as EJB or Servlet are problematic since the container and server have no knowledge of these resources. JSR 236 enables concurrency largely by extending the Concurrency Utilities API developed under JSR-166. This also allows a consistency between Java SE and Java EE concurrency programming model. There are four main programming interfaces available: ManagedExecutorService ManagedScheduledExecutorService ContextService ManagedThreadFactory ManagedExecutorService is a managed version of java.util.concurrent.ExecutorService. The implementations of this interface are provided by the container and accessible using JNDI reference: <resource-env-ref>  <resource-env-ref-name>    concurrent/BatchExecutor  </resource-env-ref-name>  <resource-env-ref-type>    javax.enterprise.concurrent.ManagedExecutorService  </resource-env-ref-type><resource-env-ref> and available as: @Resource(name="concurrent/BatchExecutor")ManagedExecutorService executor; Its recommended to bind the JNDI references in the java:comp/env/concurrent subcontext. The asynchronous tasks that need to be executed need to implement java.lang.Runnable or java.util.concurrent.Callable interface as: public class MyTask implements Runnable { public void run() { // business logic goes here }} OR public class MyTask2 implements Callable<Date> {  public Date call() { // business logic goes here   }} The task is then submitted to the executor using one of the submit method that return a Future instance. The Future represents the result of the task and can also be used to check if the task is complete or wait for its completion. Future<String> future = executor.submit(new MyTask(), String.class);. . .String result = future.get(); Another example to submit tasks is: class MyTask implements Callback<Long> { . . . }class MyTask2 implements Callback<Date> { . . . }ArrayList<Callable> tasks = new ArrayList<();tasks.add(new MyTask());tasks.add(new MyTask2());List<Future<Object>> result = executor.invokeAll(tasks); The ManagedExecutorService may be configured for different properties such as: Hung Task Threshold: Time in milliseconds that a task can execute before it is considered hung Pool Info Core Size: Number of threads to keep alive Maximum Size: Maximum number of threads allowed in the pool Keep Alive: Time to allow threads to remain idle when # of threads > Core Size Work Queue Capacity: # of tasks that can be stored in inbound buffer Thread Use: Application intend to run short vs long-running tasks, accordingly pooled or daemon threads are picked ManagedScheduledExecutorService adds delay and periodic task running capabilities to ManagedExecutorService. The implementations of this interface are provided by the container and accessible using JNDI reference: <resource-env-ref>  <resource-env-ref-name>    concurrent/BatchExecutor  </resource-env-ref-name>  <resource-env-ref-type>    javax.enterprise.concurrent.ManagedExecutorService  </resource-env-ref-type><resource-env-ref> and available as: @Resource(name="concurrent/timedExecutor")ManagedExecutorService executor; And then the tasks are submitted using submit, invokeXXX or scheduleXXX methods. ScheduledFuture<?> future = executor.schedule(new MyTask(), 5, TimeUnit.SECONDS); This will create and execute a one-shot action that becomes enabled after 5 seconds of delay. More control is possible using one of the newly added methods: MyTaskListener implements ManagedTaskListener {  public void taskStarting(...) { . . . }  public void taskSubmitted(...) { . . . }  public void taskDone(...) { . . . }  public void taskAborted(...) { . . . } }ScheduledFuture<?> future = executor.schedule(new MyTask(), 5, TimeUnit.SECONDS, new MyTaskListener()); Here, ManagedTaskListener is used to monitor the state of a task's future. ManagedThreadFactory provides a method for creating threads for execution in a managed environment. A simple usage is: @Resource(name="concurrent/myThreadFactory")ManagedThreadFactory factory;. . .Thread thread = factory.newThread(new Runnable() { . . . }); concurrent/myThreadFactory is a JNDI resource. There is lot of interesting content in the Early Draft, download it, and read yourself. The implementation will be made available soon and also be integrated in GlassFish 4 as well. Some references for further exploring ... Javadoc Early Draft Specification concurrency-ee-spec.java.net [email protected]

  Read the article

• How can I fix this NavigationController and UIToolbar offset issue in Objective-C?

  - by editor

  I'm adding a couple of buttons to an already-existing NavigationController. The two buttons are added to a UIView, which is pushed onto the NavigationItem. The buttons stop and reload a UIWebView. Problem is that there's a slight offset issue that is making it all look pretty ugly. I wish I could set the UIToolbar to transparent or clear background but that doesn't seem to be an option. Can't seem to use negative offsets either. I've got color matching, but if you look closely there's 1px or 2px of highlighting up top that's causing a visual mismatch and then a slight offset at the bottom. Some relevant code below (based on this, inbound Googlers). What are my options to resolve this? // create a toolbar for the buttons UIToolbar* toolbar = [[UIToolbar alloc] initWithFrame:CGRectMake(0, 0, 100, 45)]; [toolbar setBarStyle: UIBarStyleDefault]; UIColor *colorForBar = [[UIColor alloc] initWithRed:.72 green:0 blue:0 alpha:0]; toolbar.tintColor = colorForBar; [colorForBar release]; //[toolbar setTranslucent:YES]; // create an array for the buttons NSMutableArray* buttons = [[NSMutableArray alloc] initWithCapacity:3]; // create a standard reload button UIBarButtonItem *reloadButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemRefresh target:self action:@selector(reload)]; reloadButton.style = UIBarButtonItemStyleBordered; [buttons addObject:reloadButton]; [reloadButton release]; // create a spacer between the buttons UIBarButtonItem *spacer = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFixedSpace target:nil action:nil]; [buttons addObject:spacer]; [spacer release]; // create a standard delete button with the trash icon UIBarButtonItem *stopButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemStop target:self action:@selector(stopLoading)]; stopButton.style = UIBarButtonItemStyleBordered; [buttons addObject:stopButton]; [stopButton release]; // put the buttons in the toolbar and release them [toolbar setItems:buttons animated:NO]; [buttons release]; // place the toolbar into the navigation bar self.navigationItem.rightBarButtonItem = [[UIBarButtonItem alloc] initWithCustomView:toolbar]; [toolbar release];

  Read the article

• Using IOperationBehavior to supply a WCF parameter

  - by Chris Kemp

  This is my first step into the world of stackoverflow, so apologies if I cock anything up. I'm trying to create a WCF Operation which has a parameter that is not exposed to the outside world, but is instead automatically passed into the function. So the world sees this: int Add(int a, int b) But it is implemented as: int Add(object context, int a, int b) Then, the context gets supplied by the system at run-time. The example I'm working with is completely artificial, but mimics something that I'm looking into in a real-world scenario. I'm able to get close, but not quite the whole way there. First off, I created a simple method and wrote an application to confirm it works. It does. It returns a + b and writes the context as a string to my debug. Yay. [OperationContract] int Add(object context, int a, int b); I then wrote the following code: public class SupplyContextAttribute : Attribute, IOperationBehavior { public void Validate(OperationDescription operationDescription) { if (!operationDescription.Messages.Any(m => m.Body.Parts.First().Name == "context")) throw new FaultException("Parameter 'context' is missing."); } public void ApplyDispatchBehavior(OperationDescription operationDescription, DispatchOperation dispatchOperation) { dispatchOperation.Invoker = new SupplyContextInvoker(dispatchOperation.Invoker); } public void ApplyClientBehavior(OperationDescription operationDescription, ClientOperation clientOperation) { } public void AddBindingParameters(OperationDescription operationDescription, BindingParameterCollection bindingParameters) { // Remove the 'context' parameter from the inbound message operationDescription.Messages[0].Body.Parts.RemoveAt(0); } } public class SupplyContextInvoker : IOperationInvoker { readonly IOperationInvoker _invoker; public SupplyContextInvoker(IOperationInvoker invoker) { _invoker = invoker; } public object[] AllocateInputs() { return _invoker.AllocateInputs().Skip(1).ToArray(); } private object[] IntroduceContext(object[] inputs) { return new[] { "MyContext" }.Concat(inputs).ToArray(); } public object Invoke(object instance, object[] inputs, out object[] outputs) { return _invoker.Invoke(instance, IntroduceContext(inputs), out outputs); } public IAsyncResult InvokeBegin(object instance, object[] inputs, AsyncCallback callback, object state) { return _invoker.InvokeBegin(instance, IntroduceContext(inputs), callback, state); } public object InvokeEnd(object instance, out object[] outputs, IAsyncResult result) { return _invoker.InvokeEnd(instance, out outputs, result); } public bool IsSynchronous { get { return _invoker.IsSynchronous; } } } And my WCF operation now looks like this: [OperationContract, SupplyContext] int Amend(object context, int a, int b); My updated references no longer show the 'context' parameter, which is exactly what I want. The trouble is that whenver I run the code, it gets past the AllocateInputs and then throws an Index was outside the bounds of the Array. error somewhere in the WCF guts. I've tried other things, and I find that I can successfully change the type of the parameter and rename it and have my code work. But the moment I remove the parameter it falls over. Can anyone give me some idea of how to get this to work (or if it can be done at all).

  Read the article

• OpenSwan IPSec phase #2 complications

  - by XXL

  Phase #1 (IKE) succeeds without any problems (verified at the target host). Phase #2 (IPSec), however, is erroneous at some point (apparently due to misconfiguration on localhost). This should be an IPSec-only connection. I am using OpenSwan on Debian. The error log reads the following (the actual IP-addr. of the remote endpoint has been modified): pluto[30868]: "x" #2: initiating Quick Mode PSK+ENCRYPT+PFS+UP+IKEv2ALLOW+SAREFTRACK {using isakmp#1 msgid:5ece82ee proposal=AES(12)_256-SHA1(2)_160 pfsgroup=OAKLEY_GROUP_DH22} pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #1: the peer proposed: 0.0.0.0/0:0/0 - 0.0.0.0/0:0/0 pluto[30868]: "x" #3: responding to Quick Mode proposal {msgid:a4f5a81c} pluto[30868]: "x" #3: us: 192.168.1.76<192.168.1.76[+S=C] pluto[30868]: "x" #3: them: 222.222.222.222<222.222.222.222[+S=C]===10.196.0.0/17 pluto[30868]: "x" #3: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 pluto[30868]: "x" #3: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #3: next payload type of ISAKMP Hash Payload has an unknown value: 97 X pluto[30868]: "x" #3: malformed payload in packet pluto[30868]: | payload malformed after IV I am behind NAT and this is all coming from wlan2. Here are the details: default via 192.168.1.254 dev wlan2 proto static 169.254.0.0/16 dev wlan2 scope link metric 1000 192.168.1.0/24 dev wlan2 proto kernel scope link src 192.168.1.76 metric 2 Output of ipsec verify: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.37/K3.2.0-24-generic (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [OK] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] This is what happens when I run ipsec auto --up x: 104 "x" #1: STATE_MAIN_I1: initiate 003 "x" #1: received Vendor ID payload [RFC 3947] method set to=109 106 "x" #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "x" #1: received Vendor ID payload [Cisco-Unity] 003 "x" #1: received Vendor ID payload [Dead Peer Detection] 003 "x" #1: ignoring unknown Vendor ID payload [502099ff84bd4373039074cf56649aad] 003 "x" #1: received Vendor ID payload [XAUTH] 003 "x" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed 108 "x" #1: STATE_MAIN_I3: sent MI3, expecting MR3 004 "x" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp1024} 117 "x" #2: STATE_QUICK_I1: initiate 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 20s for response 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 40s for response 031 "x" #2: max number of retransmissions (2) reached STATE_QUICK_I1. No acceptable response to our first Quick Mode message: perhaps peer likes no proposal 000 "x" #2: starting keying attempt 2 of at most 3, but releasing whack I have enabled NAT traversal in ipsec.conf accordingly. Here are the settings relative to the connection in question: version 2.0 config setup plutoopts="--perpeerlog" plutoopts="--interface=wlan2" dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn x authby=secret pfs=yes auto=add phase2alg=aes256-sha1;dh22 keyingtries=3 ikelifetime=8h type=transport left=192.168.1.76 leftsubnet=192.168.1.0/24 leftprotoport=0/0 right=222.222.222.222 rightsubnet=10.196.0.0/17 rightprotoport=0/0 Here are the specs provided by the other end that must be met for Phase #2: encryption algorithm: AES (128 or 256 bit) hash algorithm: SHA local ident1 (addr/mask/prot/port): (10.196.0.0/255.255.128.0/0/0) local ident2 (addr/mask/prot/port): (10.241.0.0/255.255.0.0/0/0) remote ident (addr/mask/prot/port): (x.x.x.x/x.x.x.x/0/0) (internal network or localhost) Security association lifetime: 4608000 kilobytes/3600 seconds PFS: DH group2 So, finally, what might be the cause of the issue that I am experiencing? Thank you.

  Read the article

• UFW as an active service on Ubuntu

  - by lamcro

  Every time I restart my computer, and check the status of the UFW firewall (sudo ufw status), it is disabled, even if I then enable and restart it. I tried putting sudo ufw enable as one of the startup applications but it asks for the sudo password every time I log on, and I'm guessing it does not protect anyone else who logs on my computer. How can I setup ufw so it is activated when I turn on my computer, and protects all accounts? Update I just tried /etc/init.d/ufw start, and it activated the firewall. Then I restarted the computer, and again it was disabled. content of /etc/ufw/ufw.conf # /etc/ufw/ufw.conf # # set to yes to start on boot ENABLED=yes # set to one of 'off', 'low', 'medium', 'high' LOGLEVEL=full content of /etc/default/ufw # /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=no # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW inbound packets on the INPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # extra connection tracking modules to load IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_irc nf_nat_irc" Update Followed your advise and ran update-rc.d with no luck. lester@mcgrath-pc:~$ sudo update-rc.d ufw defaults update-rc.d: warning: /etc/init.d/ufw missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/ufw ... /etc/rc0.d/K20ufw -> ../init.d/ufw /etc/rc1.d/K20ufw -> ../init.d/ufw /etc/rc6.d/K20ufw -> ../init.d/ufw /etc/rc2.d/S20ufw -> ../init.d/ufw /etc/rc3.d/S20ufw -> ../init.d/ufw /etc/rc4.d/S20ufw -> ../init.d/ufw /etc/rc5.d/S20ufw -> ../init.d/ufw lester@mcgrath-pc:~$ ls -l /etc/rc?.d/*ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc0.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc1.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc2.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc3.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc4.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc5.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc6.d/K20ufw -> ../init.d/ufw

  Read the article

• Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

  - by Steven

  We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information? Edit: Here is an extract of the log of one of the two VPN devices, which is a Cisco 3000 series VPN concentrator. 27981 03/08/2010 10:02:16.290 SEV=4 IKE/41 RPT=16120 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27983 03/08/2010 10:02:56.930 SEV=4 IKE/41 RPT=16121 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27986 03/08/2010 10:03:35.370 SEV=4 IKE/41 RPT=16122 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) [… same continues for another 15 minutes …] 28093 03/08/2010 10:19:46.710 SEV=4 IKE/41 RPT=16140 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28096 03/08/2010 10:20:17.720 SEV=5 IKE/172 RPT=1291 xxxxxxxx Group [xxxxxxxx] Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end IS behind a NAT device 28100 03/08/2010 10:20:17.820 SEV=3 IKE/134 RPT=79 xxxxxxxx Group [xxxxxxxx] Mismatch: Configured LAN-to-LAN proposal differs from negotiated proposal. Verify local and remote LAN-to-LAN connection lists. 28103 03/08/2010 10:20:17.820 SEV=4 IKE/119 RPT=1197 xxxxxxxx Group [xxxxxxxx] PHASE 1 COMPLETED 28104 03/08/2010 10:20:17.820 SEV=4 AUTH/22 RPT=1031 xxxxxxxx User [xxxxxxxx] Group [xxxxxxxx] connected, Session Type: IPSec/LAN- to-LAN 28106 03/08/2010 10:20:17.820 SEV=4 AUTH/84 RPT=39 LAN-to-LAN tunnel to headend device xxxxxxxx connected 28110 03/08/2010 10:20:17.920 SEV=5 IKE/25 RPT=1291 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28113 03/08/2010 10:20:17.920 SEV=5 IKE/24 RPT=88 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28116 03/08/2010 10:20:17.920 SEV=5 IKE/66 RPT=1290 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28117 03/08/2010 10:20:17.930 SEV=5 IKE/25 RPT=1292 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28120 03/08/2010 10:20:17.930 SEV=5 IKE/24 RPT=89 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28123 03/08/2010 10:20:17.930 SEV=5 IKE/66 RPT=1291 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28124 03/08/2010 10:20:18.070 SEV=4 IKE/173 RPT=17330 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices. 28127 03/08/2010 10:20:18.070 SEV=4 IKE/49 RPT=17332 xxxxxxxx Group [xxxxxxxx] Security negotiation complete for LAN-to-LAN Group (xxxxxxxx) Responder, Inbound SPI = 0x56a4fe5c, Outbound SPI = 0xcdfc3892 28130 03/08/2010 10:20:18.070 SEV=4 IKE/120 RPT=17332 xxxxxxxx Group [xxxxxxxx] PHASE 2 COMPLETED (msgid=37b3b298) 28131 03/08/2010 10:20:18.750 SEV=4 IKE/41 RPT=16141 xxxxxxxx Group [xxxxxxxx] IKE Initiator: New Phase 2, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28135 03/08/2010 10:20:18.870 SEV=4 IKE/173 RPT=17331 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices.

  Read the article

• [GEEK SCHOOL] Network Security 4: Windows Firewall: Your System’s Best Defense

  - by Ciprian Rusen

  If you have your computer connected to a network, or directly to your Internet connection, then having a firewall is an absolute necessity. In this lesson we will discuss the Windows Firewall – one of the best security features available in Windows! The Windows Firewall made its debut in Windows XP. Prior to that, Windows system needed to rely on third-party solutions or dedicated hardware to protect them from network-based attacks. Over the years, Microsoft has done a great job with it and it is one of the best firewalls you will ever find for Windows operating systems. Seriously, it is so good that some commercial vendors have decided to piggyback on it! Let’s talk about what you will learn in this lesson. First, you will learn about what the Windows Firewall is, what it does, and how it works. Afterward, you will start to get your hands dirty and edit the list of apps, programs, and features that are allowed to communicate through the Windows Firewall depending on the type of network you are connected to. Moving on from there, you will learn how to add new apps or programs to the list of allowed items and how to remove the apps and programs that you want to block. Last but not least, you will learn how to enable or disable the Windows Firewall, for only one type of networks or for all network connections. By the end of this lesson, you should know enough about the Windows Firewall to use and manage it effectively. What is the Windows Firewall? Windows Firewall is an important security application that’s built into Windows. One of its roles is to block unauthorized access to your computer. The second role is to permit authorized data communications to and from your computer. Windows Firewall does these things with the help of rules and exceptions that are applied both to inbound and outbound traffic. They are applied depending on the type of network you are connected to and the location you have set for it in Windows, when connecting to the network. Based on your choice, the Windows Firewall automatically adjusts the rules and exceptions applied to that network. This makes the Windows Firewall a product that’s silent and easy to use. It bothers you only when it doesn’t have any rules and exceptions for what you are trying to do or what the programs running on your computer are trying to do. If you need a refresher on the concept of network locations, we recommend you to read our How-To Geek School class on Windows Networking. Another benefit of the Windows Firewall is that it is so tightly and nicely integrated into Windows and all its networking features, that some commercial vendors decided to piggyback onto it and use it in their security products. For example, products from companies like Trend Micro or F-Secure no longer provide their proprietary firewall modules but use the Windows Firewall instead. Except for a few wording differences, the Windows Firewall works the same in Windows 7 and Windows 8.x. The only notable difference is that in Windows 8.x you will see the word “app” being used instead of “program”. Where to Find the Windows Firewall By default, the Windows Firewall is turned on and you don’t need to do anything special in order for it work. You will see it displaying some prompts once in a while but they show up so rarely that you might forget that is even working. If you want to access it and configure the way it works, go to the Control Panel, then go to “System and Security” and select “Windows Firewall”. Now you will see the Windows Firewall window where you can get a quick glimpse on whether it is turned on and the type of network you are connected to: private networks or public network. For the network type that you are connected to, you will see additional information like: The state of the Windows Firewall How the Windows Firewall deals with incoming connections The active network When the Windows Firewall will notify you You can easily expand the other section and view the default settings that apply when connecting to networks of that type. If you have installed a third-party security application that also includes a firewall module, chances are that the Windows Firewall has been disabled, in order to avoid performance issues and conflicts between the two security products. If that is the case for your computer or device, you won’t be able to view any information in the Windows Firewall window and you won’t be able to configure the way it works. Instead, you will see a warning that says: “These settings are being managed by vendor application – Application Name”. In the screenshot below you can see an example of how this looks. How to Allow Desktop Applications Through the Windows Firewall Windows Firewall has a very comprehensive set of rules and most Windows programs that you install add their own exceptions to the Windows Firewall so that they receive network and Internet access. This means that you will see prompts from the Windows Firewall on occasion, generally when you install programs that do not add their own exceptions to the Windows Firewall’s list. In a Windows Firewall prompt, you are asked to select the network locations to which you allow access for that program: private networks or public networks. By default, Windows Firewall selects the checkbox that’s appropriate for the network you are currently using. You can decide to allow access for both types of network locations or just to one of them. To apply your setting press “Allow access”. If you want to block network access for that program, press “Cancel” and the program will be set as blocked for both network locations. At this step you should note that only administrators can set exceptions in the Windows Firewall. If you are using a standard account without administrator permissions, the programs that do not comply with the Windows Firewall rules and exceptions are automatically blocked, without any prompts being shown. You should note that in Windows 8.x you will never see any Windows Firewall prompts related to apps from the Windows Store. They are automatically given access to the network and the Internet based on the assumption that you are aware of the permissions they require based on the information displayed by the Windows Store. Windows Firewall rules and exceptions are automatically created for each app that you install from the Windows Store. However, you can easily block access to the network and the Internet for any app, using the instructions in the next section. How to Customize the Rules for Allowed Apps Windows Firewall allows any user with an administrator account to change the list of rules and exceptions applied for apps and desktop programs. In order to do this, first start the Windows Firewall. On the column on the left, click or tap “Allow an app or feature through Windows Firewall” (in Windows 8.x) or “Allow a program or feature through Windows Firewall” (in Windows 7). Now you see the list of apps and programs that are allowed to communicate through the Windows Firewall. At this point, the list is grayed out and you can only view which apps, features, and programs have rules that are enabled in the Windows Firewall.

  Read the article

• Another Marketing Conference, part two – the afternoon

  - by Roger Hart

  In my previous post, I’ve covered the morning sessions at AMC2012. Here’s the rest of the write-up. I’ve skipped Charles Nixon’s session which was a blend of funky futurism and professional development advice, but you can see his slides here. I’ve also skipped the Google presentation, as it was a little thin on insight. 6 – Brand ambassadors: Getting universal buy in across the organisation, Vanessa Northam Slides are here This was the strongest enforcement of the idea that brand and campaign values need to be delivered throughout the organization if they’re going to work. Vanessa runs internal communications at e-on, and shared her experience of using internal comms to align an organization and thereby get the most out of a campaign. She views the purpose of internal comms as: “…to help leaders, to communicate the purpose and future of an organization, and support change.” This (and culture) primes front line staff, which creates customer experience and spreads brand. You ensure a whole organization knows what’s going on with both internal and external comms. If everybody is aligned and informed, if everybody can clearly articulate your brand and campaign goals, then you can turn everybody into an advocate. Alignment is a powerful tool for delivering a consistent experience and message. The pathological counter example is the one in which a marketing message goes out, which creates inbound customer contacts that front line contact staff haven’t been briefed to handle. The NatWest campaign was again mentioned in this context. The good example was e-on’s cheaper tariff campaign. Building a groundswell of internal excitement, and even running an internal launch meant everyone could contribute to a good customer experience. They found that meter readers were excited – not a group they’d considered as obvious in providing customer experience. But they were a group that has a lot of face-to-face contact with customers, and often were asked questions they may not have been briefed to answer. Being able to communicate a simple new message made it easier for them, and also let them become a sales and marketing asset to the organization. 7 – Goodbye Internet, Hello Outernet: the rise and rise of augmented reality, Matt Mills I wasn’t going to write this up, because it was essentially a sales demo for Aurasma. But the technology does merit some discussion. Basically, it replaces QR codes with visual recognition, and provides a simple-looking back end for attaching content. It’s quite sexy. But here’s my beef with it: QR codes had a clear visual language – when you saw one you knew what it was and what to do with it. They were clunky, but they had the “getting started” problem solved out of the box once you knew what you were looking at. However, they fail because QR code reading isn’t native to the platform. You needed an app, which meant you needed to know to download one. Consequentially, you can’t use QR codes with and ubiquity, or depend on them. This means marketers, content providers, etc, never pushed them, and they remained and awkward oddity, a minority sport. Aurasma half solves problem two, and re-introduces problem one, making it potentially half as useful as a QR code. It’s free, and you can apparently build it into your own apps. Add to that the likelihood of it becoming native to the platform if it takes off, and it may have legs. I guess we’ll see. 8 – We all need to code, Helen Mayor Great title – good point. If there was anybody in the room who didn’t at least know basic HTML, and if Helen’s presentation inspired them to learn, that’s fantastic. However, this was a half hour sales pitch for a basic coding training course. Beyond advocating coding skills it contained no useful content. Marketers may also like to consider some of these resources if they’re looking to learn code: Code Academy – free interactive tutorials Treehouse – learn web design, web dev, or app dev WebPlatform.org – tutorials and documentation for web tech  11 – Understanding our inner creativity, Margaret Boden This session was the most theoretical and probably least actionable of the day. It also held my attention utterly. Margaret spoke fluently, fascinatingly, without slides, on the subject of types of creativity and how they work. It was splendid. Yes, it raised a wry smile whenever she spoke of “the content of advertisements” and gave an example from 1970s TV ads, but even without the attempt to meet the conference’s theme this would have been thoroughly engaging. There are, Margaret suggested, three types of creativity: Combinatorial creativity The most common form, and consisting of synthesising ideas from existing and familiar concepts and tropes. Exploratory creativity Less common, this involves exploring the limits and quirks of a particular constraint or style. Transformational creativity This is uncommon, and arises from finding a way to do something that the existing rules would hold to be impossible. In essence, this involves breaking one of the constraints that exploratory creativity is composed from. Combinatorial creativity, she suggested, is particularly important for attaching favourable ideas to existing things. As such is it probably worth developing for marketing. Exploratory creativity may then come into play in something like developing and optimising an idea or campaign that now has momentum. Transformational creativity exists at the edges of this exploration. She suggested that products may often be transformational, but that marketing seemed unlikely to in her experience. This made me wonder about Listerine. Crucially, transformational creativity is characterised by there being some element of continuity with the strictures of previous thinking. Once it has happened, there may be  move from a revolutionary instance into an explored style. Again, from a marketing perspective, this seems to chime well with the thinking in Youngme Moon’s book: Different Talking about the birth of Modernism is visual art, Margaret pointed out that transformational creativity has historically risked a backlash, demanding what is essentially an education of the market. This is best accomplished by referring back to the continuities with the past in order to make the new familiar. Thoughts The afternoon is harder to sum up than the morning. It felt less concrete, and was troubled by a short run of poor presentations in the middle. Mainly, I found myself wrestling with the internal comms issue. It’s one of those things that seems astonishingly obvious in hindsight, but any campaign – particularly any large one – is doomed if the people involved can’t believe in it. We’ve run things here that haven’t gone so well, of course we have; who hasn’t? I’m not going to air any laundry, but people not being informed (much less aligned) feels like a common factor. It’s tough though. Managing and anticipating information needs across an organization of any size can’t be easy. Even the simple things like ensuring sales and support departments know what’s in a product release, and what messages go with it are easy to botch. The thing I like about framing this as a brand and campaign advocacy problem is that it makes it likely to get addressed. Better is always sexier than less-worse. Any technical communicator who’s ever felt crowded out by a content strategist or marketing copywriter  knows this – increasing revenue gets a seat at the table far more readily than reducing support costs, even if the financial impact is identical. So that’s it from AMC. The big thought-provokers were social buying behaviour and eliciting behaviour change, and the value of internal communications in ensuring successful campaigns and continuity of customer experience. I’ll be chewing over that for a while, and I’d definitely return next year.      

  Read the article

• Enhanced REST Support in Oracle Service Bus 11gR1

  - by jeff.x.davies

  In a previous entry on REST and Oracle Service Bus (see http://blogs.oracle.com/jeffdavies/2009/06/restful_services_with_oracle_s_1.html) I encoded the REST query string really as part of the relative URL. For example, consider the following URI: http://localhost:7001/SimpleREST/Products/id=1234 Now, technically there is nothing wrong with this approach. However, it is generally more common to encode the search parameters into the query string. Take a look at the following URI that shows this principle http://localhost:7001/SimpleREST/Products?id=1234 At first blush this appears to be a trivial change. However, this approach is more intuitive, especially if you are passing in multiple parameters. For example: http://localhost:7001/SimpleREST/Products?cat=electronics&subcat=television&mfg=sony The above URI is obviously used to retrieve a list of televisions made by Sony. In prior versions of OSB (before 11gR1PS3), parsing the query string of a URI was more difficult than in the current release. In 11gR1PS3 it is now much easier to parse the query strings, which in turn makes developing REST services in OSB even easier. In this blog entry, we will re-implement the REST-ful Products services using query strings for passing parameter information. Lets begin with the implementation of the Products REST service. This service is implemented in the Products.proxy file of the project. Lets begin with the overall structure of the service, as shown in the following screenshot. This is a common pattern for REST services in the Oracle Service Bus. You implement different flows for each of the HTTP verbs that you want your service to support. Lets take a look at how the GET verb is implemented. This is the path that is taken of you were to point your browser to: http://localhost:7001/SimpleREST/Products/id=1234 There is an Assign action in the request pipeline that shows how to extract a query parameter. Here is the expression that is used to extract the id parameter: $inbound/ctx:transport/ctx:request/http:query-parameters/http:parameter[@name="id"]/@value The Assign action that stores the value into an OSB variable named id. Using this type of XPath statement you can query for any variables by name, without regard to their order in the parameter list. The Log statement is there simply to provided some debugging info in the OSB server console. The response pipeline contains a Replace action that constructs the response document for our rest service. Most of the response data is static, but the ID field that is returned is set based upon the query-parameter that was passed into the REST proxy. Testing the REST service with a browser is very simple. Just point it to the URL I showed you earlier. However, the browser is really only good for testing simple GET services. The OSB Test Console provides a much more robust environment for testing REST services, no matter which HTTP verb is used. Lets see how to use the Test Console to test this GET service. Open the OSB we console (http://localhost:7001/sbconsole) and log in as the administrator. Click on the Test Console icon (the little "bug") next to the Products proxy service in the SimpleREST project. This will bring up the Test Console browser window. Unlike SOAP services, we don't need to do much work in the request document because all of our request information will be encoded into the URI of the service itself. Belore the Request Document section of the Test Console is the Transport section. Expand that section and modify the query-parameters and http-method fields as shown in the next screenshot. By default, the query-parameters field will have the tags already defined. You just need to add a tag for each parameter you want to pass into the service. For out purposes with this particular call, you'd set the quer-parameters field as follows: <tp:parameter name="id" value="1234" /> </tp:query-parameters> Now you are ready to push the Execute button to see the results of the call. That covers the process for parsing query parameters using OSB. However, what if you have an OSB proxy service that needs to consume a REST-ful service? How do you tell OSB to pass the query parameters to the external service? In the sample code you will see a 2nd proxy service called CallREST. It invokes the Products proxy service in exactly the same way it would invoke any REST service. Our CallREST proxy service is defined as a SOAP service. This help to demonstrate OSBs ability to mediate between service consumers and service providers, decreasing the level of coupling between them. If you examine the message flow for the CallREST proxy service, you'll see that it uses an Operational branch to isolate processing logic for each operation that is defined by the SOAP service. We will focus on the getProductDetail branch, that calls the Products REST service using the HTTP GET verb. Expand the getProduct pipeline and the stage node that it contains. There is a single Assign statement that simply extracts the productID from the SOA request and stores it in a local OSB variable. Nothing suprising here. The real work (and the real learning) occurs in the Route node below the pipeline. The first thing to learn is that you need to use a route node when calling REST services, not a Service Callout or a Publish action. That's because only the Routing action has access to the $oubound variable, especially when invoking a business service. The Routing action contains 3 Insert actions. The first Insert action shows how to specify the HTTP verb as a GET. The second insert action simply inserts the XML node into the request. This element does not exist in the request by default, so we need to add it manually. Now that we have the element defined in our outbound request, we can fill it with the parameters that we want to send to the REST service. In the following screenshot you can see how we define the id parameter based on the productID value we extracted earlier from the SOAP request document. That expression will look for the parameter that has the name id and extract its value. That's all there is to it. You now know how to take full advantage of the query parameter parsing capability of the Oracle Service Bus 11gR1PS2. Download the sample source code here: rest2_sbconfig.jar Ubuntu and the OSB Test Console You will get an error when you try to use the Test Console with the Oracle Service Bus, using Ubuntu (or likely a number of other Linux distros also). The error (shown below) will state that the Test Console service is not running. The fix for this problem is quite simple. Open up the WebLogic Server administrator console (usually running at http://localhost:7001/console). In the Domain Structure window on the left side of the console, select the Servers entry under the Environment heading. The select the Admin Server entry in the main window of the console. By default, you should be viewing the Configuration tabe and the General sub tab in the main window. Look for the Listen Address field. By default it is blank, which means it is listening on all interfaces. For some reason Ubuntu doesn't like this. So enter a value like localhost or the specific IP address or DNS name for your server (usually its just localhost in development envirionments). Save your changes and restart the server. Your Test Console will now work correctly.

  Read the article

< Previous Page | 13 14 15 16 17 18 19  | Next Page >