Search Results

Search found 11973 results on 479 pages for 'ip conflict'.

Page 17/479 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

  - by David Bullock

  So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

  Read the article

• Is it possible to map static IP to computer name instead of MAC address?

  - by xenon

  I have a number of computers with different hostnames connected to the network. They currently hold a static IP address based on their MAC address. In other words, the static IP address is mapped to their MAC address. This gives rise to a problem and that's when we swap the harddrive from one computer to another, the MAC address becomes different and the application we are running on the harddrive has problem getting the right static IP for it to work. We can't configure the IP address in the application all the time. And changing the static IP addresses to re-map to the computer's new MAC address can be quite a pain. Since all the computers have a unique computer name as their hostname, is it possible to configure such that when these computers grab IP addresses from the DHCP server, DHCP will learn about their hostname and assign the correct IP address? This is to say, the static IP is mapped to the computers' hostname instead of their MAC address. All the computers are running on Windows 7. Would this be possible? If so how should I go about do this?

  Read the article

• F5 Big-IP iRule - HTTP Redirect

  - by djo

  I have just started to work with F5's Big-IP and I have a question about iRules and HTTP redirects. We are moving to offload our SSL from our web servers and onto the F5, our application as it stands enforces a number of pages on our site to only run in HTTPS. I want to move this from the APP and onto the F5 but I have not been able to figure our how, so as an example I would want anyone trying to login in to be forced to use HTTPS e.g. http://"mysite"/login.aspx = https://"mysite"/login.aspx. I have done some google searches that have come up with some good info on this but I have yet to find what I am looking for, if anyone has done this and wishes to share this with me that would be great

  Read the article

• Keep getting invalid IP via WiFi

  - by nmuntz

  There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

  Read the article

• Tomcat 6 IP restrictions

  - by KB22

  I need to protect a certain folder within a web application of mine from access from outside of an defined IP range. With O'Reilly's Tomcat Tips I figured that: <Context path="/path/to/secret_files" ...> <Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="127.0.0.1" deny=""/> </Context> Is the way to go? I'm not that much into tomcat configuration so I'm dazzled a little as to where to put these restrictions. Do I put this Within my web.xml or is this a thing I need to add to some general tomcat conf file?

  Read the article

• How to get nginx to serve up on an elastic IP

  - by geekbri

  I have an EC2 instance which is serving up PHP pages with nginx and php-fpm. This works perfectly fine when accessed through the public DNS for the instance. However if I try to access the site with the Elastic IP which is bound to it, it serves up a generic "Welcome to nginx" page, even though in my server block i have listen 80 (which i thought listened on all incoming IPs on port 80). Here is my nginx config. server { listen 80; access_log /var/log/nginx/access.log; root "/var/www/clipperz/"; index index.html index.php; # Default location location / { try_files $uri $uri/ index.html; } # Parse all .php file in the $document_root directory location ~ .php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

  Read the article

• Blocking RDP connections from secondary IP addresses

  - by user73995

  Hi, I have a webserver running Windows 2008 R2 with multiple IPs assigned to it. I want to be able to RDP to the box via the main IP assigned to the box but not from any of the secondary IPs (ie... the websites IPs). I assume if I had control of the Firewall I could shut off the RDP port to the secondary IPs but it's in a hosted environment and I don't have access to the firewall. I'll contact the host to see if that's available but was hoping there was a setting I could set on the machine itself to not resolve RDP requests from the additional IPs. Any advice?

  Read the article

• Cent OS ifcfg configuration for ranges of IP's with different netmask

  - by Aaron Schlegel

  I have 1 set of 30 public IP's with a netmask of 255.255.255.0 and another set of 30 IP's with a netmask of 255.255.255.128. Both sets of IP's also have different gateways. How can I virtually assign the IP's to the machine? I have tried creating ifcfg-eth0:0 ifcfg-eth0:1 ifcfg-eth0:X ect for each IP. Below is my ifcfg file with. I have this for each IP with the correct gateway IP and netmask for each of my 60 IP's. If I do ip addr show it does show all of the 60 addresses with the correct broadcast IP and netmask. However I can only use 30 of my IP's that are from the same netmask. Am I doing this correctly? If the IP's show up with ip addr show does that mean I have correctly assigned them to the machine virtually? I want to check before I blame my hosting company for not routing the IP's correctly. DEVICE="eth0:1" BOOTPROTO="static" DNS1="**.**.**.**" DNS2="**.**.**.**" GATEWAY="2**.**.***.126" HOSTNAME="localhost.localdomain" HWADDR="0*:19:**:**:**:**" IPADDR="2**.*.**.**" IPV6INIT="no" MTU="1500" NETMASK="255.255.255.128" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" Also is there a better way to do this? I have used ifcfg-eth0:0-range1 before to assign a range of IP's from the same netmask. Is it possible to do this with ranges with different netmask? Thanks!

  Read the article

• IP not Pinging!

  - by Paddy

  I have an apache server running on Mac. i had windows before on the same machine and i had apache running there too. i could access my public sites by just typing in my ip in the web browser. now its not working. its working with localhost though!!! weird!! :( tried a lot of stuff! just couldnt make it work! any help would be greatly appreciated!!

  Read the article

• change ip address verizon fios [closed]

  - by John Smith

  One well documented way to change a dynamically assigned ip address is to log into the router configuration settings and change the mac address , disconnect the router and modem, and to turn it all back on. This actually worked with a basic modem connected by ethernet directly to a laptop, spoofing laptop mac address, with a cable internet provider. Now this question is specific to fiber optic internet providers who bundle with tv and internet (verizon fios, comcast xfinity). Verizon fios installation comes with an actiontec router, and there is a built in way to clone the mac address in the router configuration settings. What will happen if the mac address changes from what verizon installed it as? Will they get angry and disconnect service? Will other services other than internet stop working (tv or phone)?

  Read the article

• Messenger Thinks My Ip is Invalid

  - by Umut Benzer

  Hello. I am using Windows Live Messenger 2009 on Windows 7. I am using a 3G modem (ZTE Propietary USB Modem) I connect to the Internet using a software my ISP provided me. In last three days, my Messenger started to disconnect. Here is what I observed and tried to do: 1- I can browse web, can do FTP transfer etc. and obiviously have a valid IP. 2- I can sign in to Messenger (appear offline) but when I change my status to anything other then appear offline, Messenger says my connection to service has been lost. (However, it exists.) 3- When I run, MSN Connection Troubleshooter, it says my IP is invalid. When I click repair, it says repaired and just after that, I run the troubleshooter again, and it says my IP is invalid again. (However, it is valid and I am browsing the net.) 4- If I connect the Internet through eterhet or wireless there is no problem at all. 5- I re-installed Messenger (deleting all settings manually through registry and folders), re-installed all drivers and software related to USB 3G Modem. It doesn't work. And then, I took a full backup then formatted entire computer, installed a fresh windows 7, after 5 minutes, the same problem occured. What do you recommend? What can I do? Addition As seen on screenshot, it says Server IPv4 adress is 0.0.0.0 It seems like a problem, I don't know if it is. If it is, how can I solve it? Here is what I get, when I netstat. PPP adapter TTNET internet: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 217.174.39.122 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : ege.edu.tr Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 16: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 13: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter 6TO4 Adapter: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 12: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 14: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 17: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 25: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 20: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 18: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 19: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 22: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 21: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 23: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:2448:3909:2a2c:eb7b Link-local IPv6 Address . . . . . : fe80::2448:3909:2a2c:eb7b%30 Default Gateway . . . . . . . . . : Tunnel adapter Local Area Connection* 24: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{CFFCFEDB-6B53-42E0-B091-548B9ADE9C9D}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 26: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 27: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 29: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 31: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 28: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 32: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2002:d9ae:277a::d9ae:277a Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 Tunnel adapter Local Area Connection* 30: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{157CF713-B3AC-4701-87A9-14C23CA60AAB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.ege.edu.tr: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{0D3CD01B-0993-4B37-89B8-12557ECF484D}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• Big IP F5 outbound HTTP issues

  - by mbuk2k

  We've tried upgrading from 9.x to 10.2 on our F5 Big IP 3400 and everything went over fine apart from one thing. We're unable to establish any outbound HTTP (80) connections from any servers that are assigned to a virtual server. This is something that worked before and is required for certain calls our servers need to make. Interestingly HTTPS (443) connections work fine, it's literally just anything outbound over port 80 seems to fail. Does anyone know if anything has changed between 9.4 and 10.2 that would mean additional config would need to be made to allow for external HTTP connections? Any advice would be appreciated, thank you

  Read the article

• Several Server Errors (No database connect, can't create TCP/IP socket etc

  - by Tobias Baumeister

  My server stops taking requests on my website today. It works for some time, but then the server just stops working and throws several errors: 500 Internal Server Error Warning: mysql_connect(): Can't create TCP/IP socket (105) in [...] on line 7 Couldn't connect to database. Please try again. mysql_connect(): Host [...] is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' mod_fcgid: can't apply process slot for /var/www/cgi-bin/cgi_wrapper/cgi_wrapper (this is from Error Log) Any ideas what might cause it? operating system is Ubuntu

  Read the article

• LinkSys router suddenly cannot get an IP address

  - by user43208

  I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• Can't access certain specific IP/domain on Windows 7

  - by jfrobishow

  Been banging my head on the wall for some time now. I have a fresh install of Windows 7 - Ultimate ~x86. Some IPs can't resolve properly, it doesn't matter if I try using Firefox, Chrome or IE I end up with a domain not found (server not found, etc.) I am behind a router, all the other computers aren't affected only this Win 7 machine. It's only certain sites. e.g. xkcd.com, facebook's cdn, google group. Things I have tried: flushdns ipconfig renew Disable IP v6 on the NIC Double checked that the computer was in the right timezone @ the right time. Reinstall the NIC driver. Again 90% of the sites will work but not the major one :P help!!!

  Read the article

• IP Address on internet access shared over ad-hoc wifi network

  - by Jacxel

  The Situation When im staying at my girlfriends we both like to have internet access on our laptops but her accommodation don't allow wireless routers. My Question My question is if I set up an Ad-Hoc network to share the internet connection as shown here on How To Geek. Will my laptop be acting as a wireless router or will the connection all go through my laptop as one ip address so it appears to be my computer accessing the webpages etc, that my girlfriend actually is. i would be interested in knowing any additional information that could help sove this problem eg. if connectify would do what i want.

  Read the article

• How to specify a different ip address in virtual box guest os

  - by Nrew

  I am using Windows 7 as the host. And xp as guest. I've already check out this site: http://forums.virtualbox.org/viewtopic.php?f=3&t=17232 But the info is not complete. What do I need to set here, so that the guest would have another IP Address but can still connect to the internet. Because what I'm trying to accomplish here is to be able to try Team Viewer or Cross loop. With the host os and guest os. Because I only have one computer.

  Read the article

• ip routes to specific interface

  - by user65053

  I am trying to figure out how to get all traffic to 10.8.78.* to connect using interface ppp0 when available how would I properly handle this (centos) and can I fall back on eth0 when pp0 is not up? /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 69.19.219.69 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Cannot access site via IP / hostname

  - by DaveB

  I am renting a VPS with Debian installed running JBoss AS6 for my web app. I recently had some problems with my DNS hosts as they messed up the A-records for my domain which caused some new A-records to be added by mistake The DNS problem is now sorted and the domain is working ok, however I noticed that the web server no longer responds via direct IP or hostname in a web browser (although it pings ok and I can SSH in using the hostname ok) Is there any explanation for this? I am using rinetd to forward traffic from 80 to port 8080 but thats been ok for a while Any suggestions would be appreciated Regards

  Read the article

• mysql cluster virtual ip

  - by user225995

  I am new in mysql cluster and mysql cluster and versions are not my choice. I setup four machines. Two of them manager , Two of them data cluster (ndb and mysqld). And i integrate with mysql utilities master/slave configuration. Everything working fine. Mysql version 5.6.17, ndb 7.3.5 , servers ubuntu 14.04. There will be no much transactions. The only important thing is HA. Everythings must be double. My problem is virtual ip. Since I have only one farm which have master slave configuration, how can i do it without proxy? If I must use proxy which proxy is better?

  Read the article

• Changing the IP address with a name [closed]

  - by fede

  I have a web server (xampp) in a particular PC running on my LAN, and I added the following line in the 'hosts' file : 127.0.0.1 mysite. Then, in another PC connected to the LAN, I'm trying to acces the previous web server by typing 'http://mysite/index.php' on the web browser, with no luck. But if I type the IP from the server computer (http://192.168.2.87/index.php) I am able to access the web site. So, what should i configure so when i type 'http://mysite/index.php' I get the same result as http:// 192.168.2.87/index.php ?? Thanx!

  Read the article

• Two VPN connections from the same IP address

  - by Tayles

  I have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. I understand this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Please note that the remote location in question is a serviced office, so we're not in a position to change or play around with their router. Thanks!

  Read the article

• How to Assign a Static IP to an Ubuntu 10.04 Desktop Computer

  - by Mysticgeek

  If you have a home network with several computers, assigning them static IP addresses can make troubleshooting easier. Today we take a look at switching from DHCP to a static IP in Ubuntu. Assign a Static IP Using Static IPs prevents address conflicts between machines and can allow easier access to them. If you have a small home network and are satisfied with the machines getting their IP address automatically via DHCP, there won’t be anything gained by using static addresses. Using Static IPs isn’t necessarily for the average user, but if you’re a geek who wants to know the address assigned to each machine, it can allow for faster troubleshooting.  To change your Ubuntu machine to a Static IP go to System \ Preferences \ Network Connections. In our example, we’re on a wired system so click on the Wired tab, then select Auto eth0 and click on Edit. Select the IPv4 settings tab, change Method to Manual, click the Add button. Then type in the Static IP Address, Subnet Mask, DNS Servers, and Default Gateway. Then click Apply when you’re finished. Make sure to hit Enter after typing in the Default Gateway otherwise it will revert back to 0.0.0.0 You’ll need to enter in your admin password before the changes go into affect. To verify the changes have been made successfully launch a Terminal session and type in ifconfig at the command prompt, or follow these directions. You also might want to ping the address from another machine to make sure everything is communicating. If you want to assign a Static IP to your Windows machines, check out our article on how to assign a Static IP on Windows systems (make sure to browse the comments as our readers have some good suggestions).  Whether you have a small office or home network set up with a server and several machines, using a Static IP on each device can help you manage them easily. Again, it isn’t for everyone as it really depends on how your network is setup and the way you use it. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAllow Remote Control To Your Desktop On UbuntuAssign Custom Shortcut Keys on Ubuntu LinuxKeyboard Ninja: 21 Keyboard Shortcut ArticlesChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

  Read the article

• Windows 7 - traceroute hop with high latency! [closed]

  - by Mac

  I've been experiencing this problem for quite a while, and it's quite frustrating. I'll do a traceroute, to www.l.google.com, for example. This is the result (please note: I will replace some parts of personal information with text - i.e. ISP.IP is in reality an actual IP address, and ISPNAME replaces the actual ISP name): Tracing route to www.l.google.com [173.194.34.212] over a maximum of 30 hops: 1 1 ms 1 ms <1 ms 192.168.1.1 2 9 ms 8 ms 10 ms ISP.EXCHANGE.NAME [ISP.IP.172.205] 3 161 ms 171 ms 177 ms host-ISP.IP.215.246.ISPNAME.net [ISP.IP.215.246] 4 12 ms 9 ms 10 ms host-ISP.IP.215.246.ISPNAME.net [ISP.IP.215.246] 5 10 ms 9 ms 17 ms host-ISP.IP.224.165.ISPNAME.net [ISP.IP.224.165] 6 10 ms 9 ms 10 ms 10.42.0.3 7 9 ms 9 ms 10 ms host-ISP.IP.202.129.ISPNAME.net [ISP.IP.202.129] 8 10 ms 9 ms 9 ms host-ISP.IP.209.33.ISPNAME.net [ISP.IP.209.33] 9 77 ms 129 ms 164 ms host-ISP.IP.198.162.ISPNAME.net [ISP.IP.198.162] 10 43 ms 42 ms 43 ms 72.14.212.13 11 42 ms 42 ms 42 ms 209.85.252.36 12 59 ms 59 ms 59 ms 209.85.241.210 13 60 ms 76 ms 68 ms 72.14.237.124 14 59 ms 59 ms 58 ms mad01s08-in-f20.1e100.net [173.194.34.212] Trace complete. Notice that there is a spike on the 3rd hop, but also notice that the 3rd and 4th hop are to the exact same destination. Furthermore, when I ping the offended hop separately, I get the low latency I would expect to that server: Pinging ISP.IP.215.246 with 32 bytes of data: Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=12ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Ping statistics for ISP.IP.215.246: Packets: Sent = 10, Received = 10, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 12ms, Average = 9ms I'm baffled as to why or how this is happening, and it seems to "fix itself" at random times. Here is an example of where it was working as expected: http://i.imgur.com/bysno.png Notice how many fewer hops were taken. Please note that all the posted results occurred within 10 minutes of testing. I've tried contacting my ISP, and they seem clueless; in their eyes, as long as "the download speed is not slow", then they're doing everything right. Any insight would be very much appreciated, and thanks in advanced!

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >