Search Results

Search found 1292 results on 52 pages for 'martin klasson'.

Page 17/52 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • why is usb disk corrupted by Vista restore

    - by Martin
    I have a laptop with Vista Business on an 80GB disk. I have created a full backup and stored that on the original 80GB drive. On my new 320GB disk, I have created a partition with exactly the same number of bytes as the original 80GB disk. I swap the disks so that the 320GB is internal, and the 80GB is in a USB caddy. I boot from the NEO restore CD and everything looks fine: I select the dump on the USB drive, target is drive C:, start the restore. After a few seconds, the restore fails with "not enough disks in machine or disk not large enough" error (I did note the exact phrase). I then swap the 80GB disk back to the internal drive, but the thing is unbootable. Why has the restore process scrubbed the boot status of the USB drive ?

    Read the article

  • Clever recording using AVFoundation

    - by martin
    Hello I am working on my master thesis and I am programming app for iOS using AVFoundation framework. I can make by myself session and attach devices to it and record video with sound. The main problem is that I need continous recording (3hours or longer). After three hours user will stop recording and user will choose time eg. 15 mins (max 30 mins) and only this last 15 mins will be stored to iphone memory. Is it possible to 'cut' video while recording or should I record it eg. in 10 minutes block and then delete old video segments and last two segments connect to one bigger? Will perform these connections (stop recording, start new recording and then connect these two segments) lags in final long video segment? Is there any way to perform this 'clever' recording? Thank you for any ideas.

    Read the article

  • Why is my NTP controlled computer clock two minutes ahead?

    - by Martin Liversage
    The clock in my computer is configured to be synchronized using NTP. To verify this I have tried two NTP clients using various NTP servers. My computer and the NTP clients are in complete agreement about the current time even across a wide range of NTP servers. I also have a GPS and my national phone company provides an accurate clock available by calling a specific phone number. Both my GPS and the phone company agrees on the current time. However, my computer is almost precisely two minutes (or 1 minute and 59 seconds) ahead of what I believe to be the "real" current time where I live. Why is my computer two minutes ahead? I realize that synchronizing clocks using the internet may not be entirely accurate as there is latency, but two minutes is a very long time on the internet. Is NTP really two minutes ahead? I'm running Windows 7 and live in the time zone UTC+1, but I don't think that is important in understanding my problem.

    Read the article

  • How do I remove the black statusbar on Vimperator for Firefox?

    - by Martín Fixman
    I recently installed Vimperator and found it awesome, however not really fitting for my everyday tasks. So instead of disabling and enabling it each time, I decided to keep it enabled and show the Firefox toolbar. My only problem is that the black (or other colors depending on the security of the site) bar at the bottom breaks the persona induced eye-candy. Is there any way to permanently change the color of the bar, or hide it while I'm using Vimperator?

    Read the article

  • How to troubleshoot intermittent and irregular connection errors on home network (preferrably Mac client)

    - by Martin
    Hi, I'm experiencing intermittent connection errors in our home network from two different computers, normally "Connection Reset" when browsing, but also other issues such as very slow throughput. I have approximately a network setup as below: ISP-Cable Modem-Dlink DIR 655 Router-(Ethernet)-Fon Router-Mac/Windows laptop Basically, is there a simple way to monitor the network and detect where issues are coming from? Right now we don't know if it is the Fon router, the Dlink router, the modem or the ISP. As the issue is intermittent, is there a software that regularly traceroutes a set of destinations and tests e.g. throughput, something that can help us figure out where in the chain the errors are introduced? The more automatic network monitor, the better.

    Read the article

  • Looking for a host based network monitor solution

    - by Ole Martin Handeland
    Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

    Read the article

  • PNG alpha rendered as black in Blender

    - by Camilo Martin
    I'm a Blender novice, so this is probably easy to fix. When I use a transparent PNG as a texture in Blender, the parts that should be transparent are rendered as black. This is especially confusing since in the material preview it looks as if the material would indeed be transparent. Here's a screenshot: This is the test texture, and in the right on top of a checkerboard:                        Here is the .blend file in case you want to check it:                                                      

    Read the article

  • Adding file type to ack permanently

    - by Martin Tóth
    I've recently learned how to let ack support more filetypes (adding the following to .ackrc): --type-add latte=.latte Unfortunately, that produces an info line on every ack search I use, even ones with 0 results. $ ack --latte dump ack: --type-add: Type "latte" does not exist, creating with ".latte" ... Is there a way to make this a more permanent addition? (i.e. get rid of this info line) This looks to me like it's adding this new type on every ack call. Is it a problem with my installation of ack? I'm on Mac OS X 10.5.8 with ack 1.92 (Running under Perl 5.10.1)

    Read the article

  • How can I rebuild the index in Thunderbird 3.0?

    - by Martin
    Hello, I have just deleted a lot of old messages (about 3,000) from my Thunderbird 3.0 profile. When I now use the new search feature (search all messages), TB still finds the deleted ones. I deleted them this way: I moved the messages to an own "archive" folder (not the built-in archive feature). Then I stopped TB and moved the archive files and folders to a different place on my file system. Then restarted TB. I archive my messages this way for years now. So, it seems that Thunderbird does not notice the deletion of my messages, thus the index is not updated. How can I tell TB to instantly rebuild the index?

    Read the article

  • VirtualHost on WAMPSERVER not working

    - by Martin C
    I currently have WAMPSERVER 2.2 set up on my PC. I'm trying to set up a new host called pplocal.local I made the changes in httpd.conf to uncomment this: Include conf/extra/httpd-vhosts.conf Then, I edited httpd-vhosts.cong and I added the following: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/" ServerName localhost </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/pp/" ServerName pplocal.local <Directory "E:/wamp2/www/pp/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> CustomLog "E:\wamp2\logs\pplocal-access.log" common ErrorLog "E:\wamp2\logs\pplocal-error.log" Im my windows 'hosts' file I added: 127.0.0.1 localhost 127.0.0.1 pplocal.local Then, I restarted apache. If I type localhost in my browser I get the files at E:/wamp2/www/ If I type pplocal.local in my browser I get the files at E:/wam2/www/ instead of those at E:/wamp2/www/pp/ I have followed several tutorials and can't see what I'm doing wrong. I'm new to editing the files associated with apache so any advice is appreciated. Thanks

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • recursive grep started at / hangs

    - by Martin
    I have used following grep search pattern on multiple platforms: grep -r -I -D skip 'string_to_match' / For example on FreeBSD 8.0, FreeBSD 6.4 and Debian 6.0(squeeze). Command does a recursive search starting from root directory, assumes that binary files do not have the 'string_to_match' and skips devices, sockets and named pipes. FreeBSD 8.0 and FreeBSD 6.4 use GNU grep version 2.5.1 and Debian 6.0 uses GNU grep version 2.6.3. On FreeBSD 6.4, last information printed to stderr was "grep: /dev/cuad0: Device busy". After this grep just idles as according to "top -m io -o total" the I/O usage of grep is nonexistent. Same behavior is true under FreeBSD 8.0, but last information sent to stderr is "grep: /tmp/.wine-0: Permission denied" on my installation. In case of Debian, last output to stderr is "grep: /proc/sysrq-trigger: Input/output error". If I check the I/O usage of grep process under Debian, it is following: root@Debian:~# iotop -bp 22439 Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / ^Croot@Debian:~# What might cause this? Is there a way to view which file grep is currently processing in case lsof is not present? I'm able to use lsof under Debian and looks like the problematic file name there is "0xc6b2c230 file struct, ty=0, op=0xc0d34120". I'm not sure what this is.. I'm not able to use lsof or fstat under FreeBSD. PS: I know I could use find utility, but this is not the question.

    Read the article

  • How to get back the themes feature in Windows XP?

    - by Martín M.
    When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

    Read the article

  • Jetty8 virtual hosts

    - by Martin
    I have a server JAR that is deployed once per customer, it is the API server for their software package. To that end, the port for each API instance must be the same, so that anything programmed against it can always find it. Each instance is deployed on a different domain name The problem I'm having is that, even when using a SelectChannelConnector and setting the host property, I can't get two instances to run simultaneously, I get a BindException with "Address already in use". I suppose my question is: can Jetty do this, or do I need to do some external re-writing, or is there a better way I can go about achieving the same ends? Thanks.

    Read the article

  • Why are there unknown URLs in router log?

    - by Martin
    I recently looked at my router log. Why are a lot of requests that I don't send originated from a computer in my home network? They do not look like 3rd-party advertisements / images embedded in a page. The request have patterns, such as: top-visitor.com/look.php www.dottip.com/search/result.php?aff=8755&req=nickelodeon+games www.placeca.com/search/result.php?aff=3778&req=wireless+cell+phone www.bb5a.com/search.php?username=3348&keywords=flights www.blazerbox.com/search.php?username=2341&keywords=colorado+springs+real+estate www.freeautosource.com/search.php?username=sun100&keywords=vehicle www.1sp2.com/search.php?username=20190&keywords=las+the+hotel+vegas www.loadgeo.com/search/result.php?aff=10357&req=winamp www.exalt123.com/portal.php?ref=seo2007 www.7catalogs.com/search.php?username=la24&keywords=shutter www.theloaninstitute.com/search.php?username=kevin&keywords=webcam www.grammt.com/search.php?username=2530&keywords=bob And there are hundreds of these requests send within a second. So what's happening?

    Read the article

  • How to extend a Linux PV partition online after virtual disk growth

    - by Yves Martin
    VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

    Read the article

  • Is VGA port hot-pluggable?

    - by Martin Bøgelund
    In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

    Read the article

  • How can I transfer a blog hosted on Community Server to WordPress?

    - by Martin Plante
    I have a blog hosted on Community Server 2.1 (old version). I want to transfer it to WordPress (.com). I have tried exporting it to the BlogML format, but it failed with an exception. I saved a copy of the full RSS feed, by setting the # of posts to show to a huge number, save, then lower it back. I have all images and do not mind having to upload and rename them one by one. There must be a way to read that RSS file and either directly import it into WordPress, or for a more complicated path, transform it with the proper XSLT into the BlogML (or other) format, to import it into WordPress?

    Read the article

  • How does geolocation based on IP address work?

    - by Martin
    As all Internet users, I've visited web sites which appear to know in which country and city I'm located. I understand that these web sites typically look up my IP address in a database which maps IP address to country / city which works fairly well. I've also seen companies selling this type of database. How is this database, which maps an IP address to a country / city, created in the first place? Is there a central database somewhere where each ISP registers the link between IP address and country/city? Or does the companies selling geolocation databases contact different ISP's and purchase the mapping information from them? Or is there some organization 'above' ISP's who keeps track of this?

    Read the article

  • Ebook stamper for ePub and/or Kindle formats?

    - by Nick Martin
    I've published an ebook in Adobe Acrobat PDF format. I sell this ebook DRM free and take what I consider a friendlier/less obtrusive approach of using a service to "stamp" the customer's name and email address onto each page of the ebook as a way to discourage piracy. I would like to take this same approach for selling the ebook in ePub and/or Kindle formats. Unfortunately, I haven't been able to find any stamping services for ePub or Kindle. Is DRM my only anti-piracy option when using ePub and Kindle? For a reference point, ebookstamper.com stamps ebooks in PDF format. No, they don't do anything other than PDF.

    Read the article

  • How can Windows defragmentation tools cause internal fragmentation in SQL Server?

    - by Martin
    I was just reading this article where the author talks about the file system fragmentation that can be caused by growing database files. There was one bit that I didn't quite follow. What about Windows defragmentation tools? Although you can use a Windows defragmentation tool to defragment your database files, these tools simply move chunks of files around to get them contiguous. This moving of chunks of files can cause internal fragmentation that you might not be able to resolve easily. Is the author saying here that the disc defragmenter makes no attempt to put the chunks of files in the correct sequence or have I misunderstood? If he is saying that then is this a limitation of all disc defragmenter utilities - even commercial ones?

    Read the article

  • Home-made HTTP proxy server [closed]

    - by Martin Dimitrov
    I wanted to help a friend who has some restrictions at work to visit certain sites. Locally, on a Windows 7 machine, I run Apache server and decided to make it a proxy just for the IP of my friend. So I added the following to the configuration file: ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Deny from all Allow from <his.ip> </Proxy> It worked fine. But shortly the proxy started to receive many requests of the form: 66.249.66.242 - - [22/Sep/2012:11:01:12 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BSy2T9L_L8PitQapwtHtBw&ved=0COQBEB8wPw HTTP/1.1" 403 208 66.249.71.36 - - [22/Sep/2012:11:01:49 +0300] "GET /search?hl=en&lr=lang_en&as_qdr=all&ie=UTF-8&q=related:www.aarp.org/aarp-foundation/+allinurl:+foundation&tbo=1&sa=X&ei=BOCzT-_WK8_0sgbki5XCDA&ved=0COABEB8wPg HTTP/1.1" 403 208 These are Google IPs. The requests are every 30 seconds or so. My friend is not at work today. In apache_error.log I see: [Sat Sep 22 11:09:20 2012] [error] [client 66.249.66.242] client denied by server configuration: C:/wamp/www/aclk [Sat Sep 22 11:09:47 2012] [error] [client 66.249.71.36] client denied by server configuration: C:/wamp/www/search What the hell is going on? Please, help.

    Read the article

  • Self-connecting printers

    - by Martin Cerny
    Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >