Search Results

Search found 8888 results on 356 pages for 'on disk'.

Page 17/356 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• Is there such thing as hardware encrypted raid disk?

  - by Dumitrescu Bogdan

  I have a server for which I want to protect the content. The server is located on a clients premises. Is there a way to encrypt the content of a RAID DISK (at hardware level) ? What I need is that the server will not be able to start as long as the required password is not provided (the encryption key) I will give the best answer to Miles, though the answer was not exactly to my question. But from all the comments, it seems that it cannot be done hardware or .. it cannot be done as I would like to.

  Read the article

• why is usb disk corrupted by Vista restore

  - by Martin

  I have a laptop with Vista Business on an 80GB disk. I have created a full backup and stored that on the original 80GB drive. On my new 320GB disk, I have created a partition with exactly the same number of bytes as the original 80GB disk. I swap the disks so that the 320GB is internal, and the 80GB is in a USB caddy. I boot from the NEO restore CD and everything looks fine: I select the dump on the USB drive, target is drive C:, start the restore. After a few seconds, the restore fails with "not enough disks in machine or disk not large enough" error (I did note the exact phrase). I then swap the 80GB disk back to the internal drive, but the thing is unbootable. Why has the restore process scrubbed the boot status of the USB drive ?

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• How to set path of Virtual PC hard disk differencing parent

  - by Barry Kelly

  I have an old Windows XP Mode vhd backed up from my previous system, but I'm having difficulty getting it running on the new system. The vhd is a differencing disk, and its parent is the standard Windows XP Mode base; I still have the old parent, and have verified it is binary identical to the XP Mode base in my new installation of XP Mode. But in the new system, the path to the differencing disk parent is different than the old. When I open up the settings for the .vmcx for my old XP mode, and select "Hard Disk 1", the "Virtual hard disk file" is set correctly, but the "Parent Disk:" field is pointing at the wrong path, and I can't see any way to edit it. Does anyone know how?

  Read the article

• Is there a way for Windows 7 to show remaining disk space in the status bar?

  - by Matt Thompson

  This is really driving me nuts. I do a lot of moving media files to and from USB drives, and I am constantly looking to the status bar to see how much remaining space I have on a drive. It's quick, and doesn't involve any clicking. At least, that's what I used to do using Windows XP. Is there a way to get the status bar in Windows 7 to behave in the same way? I saw in a Wikipedia article that some features have been removed from Windows 7, including these two that seem to be affecting me the most: The size of any selected item and free disk space are not shown on the status bar. When no items are selected in a folder, neither the details pane nor the status bar show the total size of files in the folder. Are there any plug-ins or registry tweaks that can be made to return this functionality? If not what is the quickest way to get the remaining space on a drive without having to click on something and leaving the directory you are working in?

  Read the article

• How to Disable Disk Quota When Checkbox is Grayed Out in Windows XP?

  - by Webs

  I am logged in as Administrator on a computer that is removed from the domain, it is only in a workgroup. I was trying out different settings and turned on disk quota. I set the quota limit pretty low and didn't realize it would have an effect on the Admin acct. Now when I log in a temporary profile gets created and the option to remove the quota is grayed out. I am in Safe Mode right now and can't seem to un do the quota with the admin acct. Did I change another setting somewhere that striped away my rights to remove the quota? Does anyone have any ideas beyond reinstalling?

  Read the article

• Cannot extend existing data disk over 2TB on windows 2008 with dynamic and gpt part

  - by DJYod

  As my D: disk is almost full (2TB) I extended the FC lun to 2.5TB. The new 500Go are seen by windows as "Unalloacted" as expected. I tried to extend the volume but windows says "The is not enough space available on the disk(s) to complete this operation" I read on the web that the disk should be configured as GPT and as a dynamic and it's already a dynamic gpt disk... How can I extend my disk without any data loss? My operating system is Windows 2008 R2 x64 SP1 and the SAN a 3PAR I hope someone can help me :) Thank you very much

  Read the article

• How do you monitor the health of a mirrored disk in Windows?

  - by NitroxDM

  I have a Mirrored Dynamic disk on my Windows 2003 Server. How do you monitor the health of the volume? Is there a way to have the server send an email when there is an issue with the volume? Is there a way to have the server run S.M.A.R.T. tests? EDIT: Nothing says WTF like logging into a client server, running DISKPART LIST VOLUME and seeing this. Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 X xDrive NTFS Mirror 233 GB Failed Rd Volume 1 C NTFS Simple 57 GB Healthy System Volume 2 D DVD-ROM 0 B Healthy Volume 3 F RAW Partition 466 GB Healthy Volume 4 E New Volume NTFS Partition 932 GB Healthy

  Read the article

• How to watch disk free space change on Linux?

  - by Bob

  As the title implies, I want to know how to watch disk free space change on Linux instead polling it periodically via statfs. When the free space is changed, a signal is emitted to allow the application having a chance to handle the change event. On Windows, it can be done by FindFirstChangeNotification with FILE_NOTIFY_CHANGE_SIZE. When the free space is changed, the HANDLE object returend by FindFirstChangeNotification gets signaled and let application do something. Is there any similar way to do that on Linux? Thanks.

  Read the article

• Cloning single disk drive to multiple drives simultaneously

  - by mr.b

  I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks!

  Read the article

• Not able to safely remove external disk after having mounted and unmounted a VHD on it

  - by Agnel Kurian

  I am using Windows 7 SP 1. I have an external hard disk (Seagate 500GB) which I am able to use without problems most of the time. I am able to plug it in, use it and then safely unmount it via the "Eject USB Mass Storage Device" option in the taskbar tray. However, if I attach a VHD file located on this disk using "Disk Management", then detach the VHD and finally try to safely disconnect the disk via the system tray, I get an error which says: "Problem Ejecting USB Mass Storage Device: Windows can't stop your 'Generic volume' device because a program is still using it. Close any programs that might be using the device, and then try again later." How do I avoid this problem? Which process could still be accessing the device (even after I have closed the "Disk Management" application) ?

  Read the article

• How do I mount a sparse disk image permanently?

  - by Mike

  On Mac OS X 10.6.7, when I mount a sparse disk image (either by double-clicking it or using hdid from the command line), the image: Appears on my desktop Needs to be re-mounted every time I log in I'd like to set up the equivalent of an /etc/fstab which will mount the image when the system boots, and make it permanent - so I don't have to worry if my symbolic links will resolve or not. Is this more trouble than it's worth on a Mac? I noticed that there is no /etc/fstab, and /etc/fstab.hd contains a dire warning: IGNORE THIS FILE. This file does nothing, contains no useful data, and might go away in future releases. Do not depend on this file or its contents. I tried sudo hdid -notremovable <image>, which seemed like half of what I wanted (according to man hdid), but it failed with an error: hdid: attach failed - no mountable file systems.

  Read the article

• Can't read from the source file or disk

  - by Wanna coffee

  I'm having a two WD external hard disk with capacity of 1 TB. I'm trying to copy SAP file(capacity - 250 GB ) in the extension of .vmdk from one hard disk to another hard disk. But when ever i'm trying to copy, at down to the line it showing me this error message. By default my both hard disk File System value is NFTS, even though it showing me an this error message. Is this problem with OS or Hard disk or Data which i'm taken into the action?? What might be the problem, Please give me your suggestions and recommendation. Awaiting for your reply.

  Read the article

• Macbook Pro - Disk Locked HD needs repair, can't reinstall OSX

  - by Rob

  I basically have the same problem. A friends HD was acting badly. Ran Disk Repair Util many times. Says disk needs repair but it won't repair it. I re formatted and installed 10.8 but that hasn't fixed it. Ive tried partitioning it and that won't work. Now I'm trying to get system 10.8 to reinstall and it says the disk is locked. Your fix requires Terminal, is that right? How do I open terminal to run your fix? Please help if you can. Disk Warrior couldn't fix it. I think the disk is bad. What do you think?

  Read the article

• Hard Disk recovery

  - by Shaihi

  I have 3 disks of the same type model and year of production. All the disks were used part of a generic solution of an IBM server solution. My problem is that all 3 disks suffered the same malfunction at the same exact time and are now dis-functional. I went to two different expert's laboratories and got the same answer: To recover the data they need another identical disk from which they can take spare parts. Can my case really be that clinical? Anyway, I am not sure if this question belongs to this forum, but I am looking to buy the following disk: IIBM ESERVER XSERIES IBM P/N 24P3707 IBM FRU 24P3708 146.8GB USCSI 10K RPM PART NOMBER 9V2005-027 I already bought a disk with the same part number, but the labs said that apparently I need a disk that was manufactured in the same factory. That means that all the numbers have to be exactly the same. If anybody know where I can purchase such a disk (the information on the lost disks is really important to me), please tell me the place.

  Read the article

• Bootcamp: setup of Windows 7 (64 bit) hanging at "disk.sys"

  - by Skade

  I am having trouble getting Windows 7 Professional (64bit) to install on a Macbook Pro (late 2010 model). The installer hangs when loading the setup from disk. When restarting, I get an option to boot Windows from disk. The installer then starts loading files from disk and suddenly hangs. Using "Safe Mode" (from the advanced menu), it tells me that the installer hangs when loading "disk.sys". The installation is made on a fresh Bootcamp partition, the disk uses GPT. Has anyone seen this before and maybe found a solution?

  Read the article

• What are my options for a disk with what seems to be a corrupted filesystem?

  - by CT

  I have a friend with an old Dell that will not boot into Windows. It has an IDE drive. It spins up. I have an IDE to USB device. I've attached the drive via that device to a working laptop. The drive does not mount. If I go into Disk Management I can see the drive but it will not initalize, says "Drive not ready." I've also booted into a linux live cd to see if the drive mounts, it does not. I am just trying to recover some pictures from the drive. The data is not important enough to send to a professional. The issue is more of a curosity on how to recover data if and when these situations would occur in the future.

  Read the article

• how to reduce size (disk space) of windows 8?

  - by humanityANDpeace

  This questions is about what things I can do to reduce the size that Windows 8 uses. Background For example: At present and with only one programm installed (MS Access 2007) I have a about 15GB of my harddisk space used. I have little space (its a 17 GB partition on a SSD disk). I would like solutions that are like: Remove files not really needed (drivers not actually needed in the system) Help files not really needed (documentation) pagefile.sys (assuming I would have 4GB ram and no real need for swaping) hiberfil.sys (used for hibernate and sleep... I need that. though I would regain about 4GB space) At best I would like to delete mostly files that I would most likely not need. Though I have no good idea where to start there. Since my setup (hardware will not change) I would be willing to delete all the drivers that windows 8 has for hardware I do not have.... The question is about ways to reduce the space that Windows 8 uses.

  Read the article

• Black screen on login, can get thru decrypt disk and access command line but no GUI

  - by t3lf3c

  Running 12.04 64 bit fresh alternative install, with disk crypto on a new Lenovo laptop Install didn't connect and install modules, even though I had the network cable plugged in and don't have any whacky proxy settings. I had to manually install ubunut-desktop and define sources after initial installation, so this seemed a bit weird (ISO matched MD5 sum though) I unplug the network cable, otherwise I get a black screen that I can do nothing with. So I turn laptop on, I have disk encryption, I type in the password at the Ubuntu decryption GUI then get "set up successfully" message "Waiting for network configuration ..." then "Waiting for up to 60 more seconds for network configuration" At this stage (a) If I wait for it then I get a black screen that I can do nothing with. (b) If I interrupt the process by pressing escape, then I break through to the command line. From the command line, I can go ahead and login, then plug my network cable in to do apt-get commands. As a precaution I do some house keeping which takes a few mins to run: sudo apt-get update sudo apt-get upgrade Running startx to get to the GUI gives: Fatal server errror: no screens found The .Xauthority file is being created in my home directory but it's empty. I review my order and note the system graphics: Intel HD Graphics (WWAN or mSATA capable) So it's weird that I can't get to the Gnome. It looks like drivers aren't working. Is there a way of getting Intel drivers from the command line? Or do you have any other suggestions on what to try next?

  Read the article

• cPanel's Web Disk - Security issues?

  - by Tim Sparks

  I'm thinking of using Web Disk (built into the later versions of cPanel) to allow a Windows or Mac computer to map a network drive that is actually a folder on our website (above the public_html folder). We currently use an antiquated local server to store information, but it is only accessible from one location - we would like to be able to access it from other locations as well. I understand that folders above public_html are not accessible via http, but I want to know how secure is the access to these folders as a network drive? There is potentially sensitive information that we need to decide whether it is appropriate to store here. The map network drive option seems to work well as it behaves as if the files are on your own computer (i.e. you can open and save files without then having to upload them - as it happens automatically). We have used Dropbox for similar purposes, but space is a issue with them, as is accountability and so we haven't used it for sensitive information. Are there any notable security concerns with using Web Disk as a secure file server?

  Read the article

• VirtualBox : increase hard disk size of the virtual machine

  - by wim

  I have run out of space on my WinXP virtual machine, which I only gave 10 GB space for when I created it. Is there an easy way to increase it to, say, 20 GB? I can't see any obvious option in VirtualBox settings. edit: the suggestion below gives this error wim@wim-ubuntu:/media/data/winxp_vm$ VBoxManage modifyhd wim.vdi --resize 20000 VBoxManage: error: Cannot register the hard disk '/media/data/winxp_vm/wim.vdi' {46284957-2c09-4e70-8a49-bfbe0f7f681d} because a hard disk '/home/wim/VirtualBox VMs/winxp_vm/wim.vdi' with UUID {46284957-2c09-4e70-8a49-bfbe0f7f681d} already exists VBoxManage: error: Details: code NS_ERROR_INVALID_ARG (0x80070057), component VirtualBox, interface IVirtualBox, callee nsISupports Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, AccessMode_ReadWrite, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 210 of file VBoxManageDisk.cpp edit2: removing the .vdi from VirtualBox before calling VBoxManage command, then adding it back in, was successful. But now I can't boot the virtual machine, I get this worrying screen: By the way, it says FATAL: Could not read from the boot medium! System halted. edit3: The vdi must be reattached to the VM after VBoxManage command. Further, the partition will need to be resized from WITHIN windows, because you will have this empty space: I was able to resize the partition easily using a bit of freeware called EASEUS Partition Master 9.1.0 Home Edition.

  Read the article

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

  - by vivi

  I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

  Read the article

• Not enough disk space '/' in AWS instance

  - by Sumant

  i am running Ubuntu 11.04 instance for my Web Server on AWS cloud, now i am getting there is no disk space in / partition of my server. df -ah say this Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 7.8G 97M 99% / proc 0 0 0 - /proc none 0 0 0 - /sys fusectl 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security none 3.7G 112K 3.7G 1% /dev none 0 0 0 - /dev/pts none 3.7G 0 3.7G 0% /dev/shm none 3.7G 80K 3.7G 1% /var/run none 3.7G 0 3.7G 0% /var/lock /dev/xvdb 414G 16G 377G 4% /mnt Now i have Tried these thing for getting some extra space on / partition Clean up All Log files for Apache. Removed all unnecessary files from server. Home directory Cleanup. But Still I am not getting enough space. This Instance type is m1.large with 8GB EBS. Now i am getting i have enough disk space in /dev/xvdb. Is there a way i can allocate some diskspace to / from /dev/xvdb or Any other Ways. Please suggest me the possible solution for this.Is it possible to use the same /dev/xvdb partition with another instance.

  Read the article

• No space left on disk

  - by Ned

  folks. I'm trying to copy/move files to an external 1 TB hard drive with about 50 GB remaining space. I receive a "no space left on disk" when I try. I've moved files off and retried, but still get the same message. Disk Usage Analyzer, Properties, and freeware Treesize all report available hard drive space of about 50 GB. I've tried df -i (50 GB available) and df -k, with the latter reporting only 1% of inode usage. I've been able to save files from Firefox to the drive also. I can't even rename files without getting the message. Yesterday in the midst of trying to figure this out I tried to move 4 files to the drive and got the message. Today, I found them on the drive. What's up with that? (That's the only time that has happened to my knowledge.) Is this an ubuntu problem? or is my hard drive just about to fail because of something like a controller problem? Any thoughts would be appreciated.

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >