Search Results

Search found 10402 results on 417 pages for 'pc maintenance'.

Page 17/417 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • PC doesn't POST with a certain model of PSU

    - by Core Xii
    I have this PC with an Asus P5N32-E SLI motherboard and an Intel Q6600 CPU. I got a new RX-5300 PSU, but it didn't work. The motherboard power LED is on fine When I switch power on, the PC powers up briefly (0.5-1 sec) then shuts down From there on out when I switch power on, it stays on, all fans and components seem to be receiving power, but the motherboard won't POST. No video output, no PC speaker beeps, nothing If I turn the hard switch on the PSU off and then back on again, go to step 2; The PC turns on and then off immediately again, and on subsequent power-ups it stays on but won't POST I disconnected every component but the motherboard, CPU and PSU. Still nothing. I tried three other models of PSU on this PC, both of higher (600) and lower (<300) wattage than the 530 on the RX-5300 and they all work fine. At this point I was convinced the PSU was faulty so I returned it. When the replacement arrived, it behaved exactly the same. So two different units of RX-5300 both with the same symptoms, neither working with this motherboard + CPU. Yet, three other models of PSU work perfectly fine. The PC store couldn't reproduce my problem with the returned PSU. I tried resetting the CMOS with the jumper. I tried with both the 4 and 4+4 (with and without the extra +4 connected) CPU connectors (curiously the RX-5300 comes equipped with both). Could it be a statistical probability that I get two units of the same model of PSU that are faulty in the exact same manner? Could the RX-5300 model itself be somehow incompatible with this motherboard? I was under the impression that PSUs were pretty much universal so long as you have the wattage. Could the motherboard be broken in some such a way as to work with certain PSUs but not others? What's going on here?

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

    Read the article

  • Generating %pc relative address of constant data

    - by Hudson
    Is there a way to have gcc generate %pc relative addresses of constants? Even when the string appears in the text segment, arm-elf-gcc will generate a constant pointer to the data, load the address of the pointer via a %pc relative address and then dereference it. For a variety of reasons, I need to skip the middle step. As an example, this simple function: const char * filename(void) { static const char _filename[] __attribute__((section(".text"))) = "logfile"; return _filename; } generates (when compiled with arm-elf-gcc-4.3.2 -nostdlib -c -O3 -W -Wall logfile.c): 00000000 <filename>: 0: e59f0000 ldr r0, [pc, #0] ; 8 <filename+0x8> 4: e12fff1e bx lr 8: 0000000c .word 0x0000000c 0000000c <_filename.1175>: c: 66676f6c .word 0x66676f6c 10: 00656c69 .word 0x00656c69 I would have expected it to generate something more like: filename: add r0, pc, #0 bx lr _filename.1175: .ascii "logfile\000" The code in question needs to be partially position independent since it will be relocated in memory at load time, but also integrate with code that was not compiled -fPIC, so there is no global offset table. My current work around is to call a non-inline function (which will be done via a %pc relative address) to find the offset from the compiled location in a technique similar to how -fPIC code works: static intptr_t __attribute__((noinline)) find_offset( void ) { uintptr_t pc; asm __volatile__ ( "mov %0, %%pc" : "=&r"(pc) ); return pc - 8 - (uintptr_t) find_offset; } But this technique requires that all data references be fixed up manually, so the filename() function in the above example would become: const char * filename(void) { static const char _filename[] __attribute__((section(".text"))) = "logfile"; return _filename + find_offset(); }

    Read the article

  • Scan a Windows PC for Viruses from a Ubuntu Live CD

    - by Trevor Bekolay
    Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

    Read the article

  • All-in-one PC has dual-core Atom

    <b>Desktop Linux:</b> "Shuttle announced a compact, all-in-one PC featuring a 15.6-inch touchscreen and a dual-core Intel Atom D510 available with SUSE Linux. The X50V2 includes a 1366 x 768 display, webcam, 4-in-1 card reader, a 2.5-inch hard drive bay, and up to 4GB of RAM, says the company."

    Read the article

  • Not able to add PC and synchronise files with Ubuntu One

    - by Ryan Hawthorne
    I have tried to add my PC to my Ubuntu One account 3 or 4 times: while I log in successfully in the Ubuntu One interface (after deleting my Ubuntu One password in 'passwords'), my folders don't give me an option to synchronise. I don't get the pink bar saying 'these folders cannot be synchronised'; I get nothing at all, no option. The second time I tried it seemed to work – but then it stopped working again.

    Read the article

  • Find Out Which PC Games Are Vista Compatible

    Do you know that for games, there is no other PC operating system that offers as great a variety as an operating system released by Microsoft? Therefore Windows Vista from Microsoft is no exception. ... [Author: Steffen Anderson - Computers and Internet - March 29, 2010]

    Read the article

  • Tablet PC Review: Fujitsu LifeBook T4410

    Fujitsu's newest convertible not only flips from laptop PC to tablet mode, but the tablet accepts both pen input and freehand multitouch gestures for everything from jotting notes to zooming and rotating photos. Is this 4.5-pounder the best tablet to date?

    Read the article

  • Tablet PC Review: Fujitsu LifeBook T4410

    Fujitsu's newest convertible not only flips from laptop PC to tablet mode, but the tablet accepts both pen input and freehand multitouch gestures for everything from jotting notes to zooming and rotating photos. Is this 4.5-pounder the best tablet to date?

    Read the article

  • How to Stress Test the Hard Drives in Your PC or Server

    - by Tim Smith
    You have the latest drives for your server.  You stacked the top-of-the line RAM in the system.  You run effective code for your system.  However, what throughput is your system capable of handling, and can you really trust the capabilities listed by hardware companies? How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

    Read the article

  • How to Download Hulu Videos to Your PC for Offline Viewing

    - by Taylor Gibb
    If you have ever tried to download videos from the Hulu website, you will have probably noticed that most methods don’t work because of the protocol that Hulu uses. Here’s how to download any video you want from the Hulu website. Note: This will work on both x86 and x64 installations of Windows, however the browser you are using must be 32-Bit. How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Format a pc with a GRUB error

    - by Anand
    i have a pc with a grub error {caused by deleting ubuntu partition in XP dual boot} i would like to format the hard disk and install a new OS [chromium] i do not have either the ubuntu or the XP installation drives although i do have the chromium bootable drive when i try to boot from the chrome bootable USB its says "your system is repairing itself" and restarts. this keeps happening over and over again. i just want to format my HDD completely and start over with chromium (i have no important data on the HDD)

    Read the article

  • Share folders between PC and Android

    - by Javi
    I want to know how to share any folders between android and ubuntu. I've got it with WindowsXP. In the Android I've the app ES Explorador. I've created a folder in the PC and it is shared. With the app from cellphone I get to found the folther shared but when I try open this, the app say me '' The account has no permissions'' I don't known how to give this permissions. Sorry for my inglish ^^ I'm lerning now.

    Read the article

  • A tinkered PC resets its nameserver (resolv.conf) on each boot

    - by aitchnyu
    The Ubuntu 11.10 PC resets resolv.conf on each boot, only with a comment remaining. How do I fix this by setting the persistent storage? It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. Content of interfaces file: root@technovia-3:~/dev/spectrum/spectrum# cat /etc/network/interfaces auto lo iface lo inet loopback

    Read the article

  • ViewSonic PC Mini VOT132 Review

    Is that a paperweight on your desk? Oops, sorry, it's a PC -- a space- and energy-saving desktop hardly bigger than a VHS cassette, priced at just $449, but with a dual-core Intel Atom CPU and all the power that office productivity workers need.

    Read the article

  • Microsoft Disputes 'Vulnerability' in Virtual PC

    Microsoft reacted this week to a claim that its Virtual PC hypervisor contains a security hole....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >