Search Results

Search found 48081 results on 1924 pages for 'public internet'.

Page 17/1924 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Problem with PPTP VPN and internet

    - by Enriquev
    Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

    Read the article

  • Wireless is connected but no internet when PC Turns on

    - by mhesabi
    I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

    Read the article

  • Share ADSL Internet connection between two computers 40 meters away (straight) from each other

    - by dario_ramos
    I have a box with a working ADSL Internet connection. About 40 meters away (straight), in another house, there is another, older box. There are two houses in between. Would there be some practical way to supply an Internet connection to the older box? The neighbors are ok with us installing cables and stuff. I'd say wifi would not be practical, since the houses in between would weaken the signal too much. And using Ethernet cables might require a switch or router in between, due to Ethernet distance limitations. Advice?

    Read the article

  • Access device with local ip over internet

    - by Joe Perrin
    I apologize up front if this is the wrong place to post this question. It seemed like the best fit. I have a device which is connected to my local network which has an IP of 192.168.1.10 from my router. Additionally I use a Windows 7 machine that runs some software called DirectUpdate which allows me to resolve the local IP of the Windows 7 machine (192.168.1.5) to be accessible to the internet via my domain (example.com) - Basic dynamic DNS updating. I'd like to access the device from example.com. I am unsure how to do this as I don't have any way to install DirectUpdate (or any software) on the device to make the device available to the internet. Any insight here would be appreciated. Thank you.

    Read the article

  • Can't access internet even though everything is working

    - by entity64
    A friend recently upgraded to a new cable internet connection. The modem connects to the router and various PCs and smartphones from her roommates connect to the router. They don't have any problem accessing the internet. She has Windows 8 and can't access any website (via wifi and ethernet). DNS (UDP) is working, DHCP set up everything correctly, Wifi is working, Trace routes and Pings (ICMP) go through with no problem at all. But neither Dropbox nor Skype nor Spotify nor any browser (all TCP) can access any website. The thing is though, she can connect through the university wifi and via a neighbors wifi. It's just her home connection. No firewalls are running and the computer is clean - no malware. How could it be that only her home connection won't work and others do?

    Read the article

  • Internet connection too slow

    - by user23950
    I now think that it is the ISP. After a full scan of my system. With super antispyware, avast, norton and spybot. Internet connection is still slow. And the truth is we have recently upgraded the connection from 512 kbps to 768. And I get a .25 Mbps at speedtest.net which is equivalent to 256 Kbps. Its not even half of the advertised speed. Is it normal for ISP's to just limit your bandwidth if you are always downloading something from the internet? Are they entitled to do this.

    Read the article

  • Internet connection issues after installing Windows Phone 8 SDK

    - by Mosquito
    first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

    Read the article

  • Windows 7 / Internet Explorer 8

    - by Rene
    I am a shop owner at zazzle.com. About six weeks ago, when my computer was running on Windows XP/IE7, my sites, as well as zazzle's homepages went out on me. I can only see part of each page. Since that time, I have a new computer running Windows 7/IE8, thinking that would solve the issue. It did not. Zazzle's emails told me to download Firefox and/or download Internet Explorer 7. I tried Firefox and was getting a different problem at the zazzle site. Now I was getting only the 'view source' pages on zazzle's homepages and my own shop sites as well. Question: Can I download IE 7 onto my IE 8 computer? Can this be done without loading that compilation of internet explorer 1 through 8? What do you think is the best solution to this problem?

    Read the article

  • Internet sharing over LAN on Windows Server 2012

    - by USER
    I have a DSL modem connected to a server (ON NIC1) running Windows Server 2012 and 7 computers (running Windows 7 32-Bit) connected to a server though a network switch (ON NIC2). I shared the internet connection from the server through DHCP so I am able to access the internet from those 7 computers, but I am unable to: Access Google.com Activate Windows Update Windows An error is arising that says UNABLE TO ACTIVATE WINDOWS Activation Error Code: 0x80072EE2 Firewall and Anti-Virus are off on both the Server and the Clients. Is there is any additional setting that I want to do?

    Read the article

  • Internet Explorer 9 about:tabs data location

    - by TheBlueSky
    Internet Explorer 9 about:Tabs page lists the most visited sites (or this is what it's supposed to do); however, it doesn't work as expected. I came to several occasions where: 1. the list doesn't display the sites that I visit often, 2. a recently visited page show up in the list 3. the list got reset or many sites removed from it if Internet Explorer was forcibly closed 4. and so on where does it store the information about the sites? And is it possible to hack the list and force to display the sites that you want/expect?

    Read the article

  • Internet Explorer 9 - website certificate expired

    - by user155504
    My Internet Explorer 9, for every page, shows this messege to me: There is a problem with this website"s security certificate. The security certificate presented by website has expired or is not yet valid. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server. We recommend that you close this webpage and do not continue to this website. Click here to close this webpage. Continue to this website (not recommended)" and afterwards it shows this : Internet Explorer blocked this website from displaying content with security certificate errors [show content] Please help me to resolve this problem!

    Read the article

  • Monitoring/logging a malfunctioning internet connection

    - by Pekka
    I have a mysterious internet connection problem: Every 15-20 minutes, the connection will become very slow, and take 2-3 minutes for anything to load. I've had a technician from the ISP over here to test the hardware, and everything is in pristine condition. They have no other explanation than a configuration error on my machine, a possibility I can exclude 90% because I'm experiencing the same problems with another machine. I will have to monitor the situation now, and I would like to run a program that logs when internet connections become slow. I thought about putting something together using at and wget. Does anybody know of some other tool for this that does this out of the box - maybe something with an adjustable request frequency, logging connection speeds etc.?

    Read the article

  • Ctrl-t / New-Tab in Internet Explorer 11 on Windows 8.1 Pro Doesn't Work

    - by Atlscrog
    Steps: Open IE on the desktop. Observe that home page opened. Click around (or not) and observe IE works. Either type ctrl-t or click on the new tab area next to current tab. Observe no new tab opens and the current page is now blank. At this point IE is inoperable and requires a restart. It seems to work fine in the Metro interface. I have reset the Internet Options and removed and re-added Internet Explorer under "Turn Windows Features on or off". Help :) Windows 8.1 Pro, 64-bit IE 11 AMD Phenom II X2 560 3.30 GHz 8 GB RAM

    Read the article

  • What you do to restrict yourself from browsing internet unnecessarily?

    - by cod3-monk-3y
    I find myself browsing internet all the time and most of the time unnecessarily. I do find some interesting stuffs, learn something new daily. But I think most of the time I browse internet without any purpose. When I finish my basic tasks such as checking email, reading couple of news and browsing stackoverflow, I either go to Digg or Stumble through different sites and I find myself lost. I want to ask those who have gone through the similar situations. How do you restrict yourself from browsing internet unnecessarily?

    Read the article

  • How do I create a WiFi hotspot sharing wireless internet connection (single adapter)?

    - by Ruppesh Nalwaya
    I know how to create a hotspot when connected to a wired network, but when I am using internet from a WiFi connection, this disconnects the wireless connection the moment I activate the hotspot. In Windows I can use Connectify Hotspot, which enables me to share the internet connection from the same wireless adapter as I am creating an access point on. As you can read on the technology overview page: Access Point mode allows you to create a hotspot using the same Wi-Fi card that you are using to access the Internet. How do I do this on Ubuntu?

    Read the article

  • Allow access to my server.

    - by Zachary Brown
    I have a server, did some of the programming myself. It ison my home network, but I need to be able to access it from anywhere over the internet. I have done the port forwarding like I am supposed to, but I still cant get to it from an outside computer. It just displays Internet Explorer cannot display the webpage. I don't know what else to do. I am on a Linksys WRT54G v8 router running ddWRT v24 micro firmware.

    Read the article

  • Bizarre and very specific Internet connection loss

    - by Synetech
    Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.) Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work) Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period) Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page) Connecting the router to the cable-modem, but putting the modem on standby also works indefinitely Same problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible) Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update. Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either) I tried cleaning the pins in the router’s plugs, but that didn’t help, which was not really a surprise since I was not getting a lost connection error. Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)? The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it. I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed. Does anybody have any ideas of explanations, fixed, or tests? (I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)

    Read the article

  • What Keeps You from Changing Your Public IP Address and Wreaking Havoc on the Internet?

    - by Jason Fitzpatrick
    What exactly is preventing you (or anyone else) from changing their IP address and causing all sorts of headaches for ISPs and other Internet users? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Whitemage is curious about what’s preventing him from wantonly changing his IP address and causing trouble: An interesting question was asked of me and I did not know what to answer. So I’ll ask here. Let’s say I subscribed to an ISP and I’m using cable internet access. The ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let’s say, 60.61.62.75, and messing with another consumer’s internet access? For the sake of this argument, let’s say that this other IP address is also owned by the same ISP. Also, let’s assume that it’s possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gateway, a network address and a broadcast address. So that’s 3 addresses the ISP “loses” to you. That seems very wasteful for dynamically assigned IP addresses, which the majority of customers are. Could they simply be using static arps? ACLs? Other simple mechanisms? Two things to investigate here, why can’t we just go around changing our addresses, and is the assignment process as wasteful as it seems? The Answer SuperUser contributor Moses offers some insight: Cable modems aren’t like your home router (ie. they don’t have a web interface with simple point-and-click buttons that any kid can “hack” into). Cable modems are “looked up” and located by their MAC address by the ISP, and are typically accessed by technicians using proprietary software that only they have access to, that only runs on their servers, and therefore can’t really be stolen. Cable modems also authenticate and cross-check settings with the ISPs servers. The server has to tell the modem whether it’s settings (and location on the cable network) are valid, and simply sets it to what the ISP has it set it for (bandwidth, DHCP allocations, etc). For instance, when you tell your ISP “I would like a static IP, please.”, they allocate one to the modem through their servers, and the modem allows you to use that IP. Same with bandwidth changes, for instance. To do what you are suggesting, you would likely have to break into the servers at the ISP and change what it has set up for your modem. Could they simply be using static arps? ACLs? Other simple mechanisms? Every ISP is different, both in practice and how close they are with the larger network that is providing service to them. Depending on those factors, they could be using a combination of ACL and static ARP. It also depends on the technology in the cable network itself. The ISP I worked for used some form of ACL, but that knowledge was a little beyond my paygrade. I only got to work with the technician’s interface and do routine maintenance and service changes. What keeps me from changing this IP address to, let’s say, 60.61.62.75 and mess with another consumer’s internet access? Given the above, what keeps you from changing your IP to one that your ISP hasn’t specifically given to you is a server that is instructing your modem what it can and can’t do. Even if you somehow broke into the modem, if 60.61.62.75 is already allocated to another customer, then the server will simply tell your modem that it can’t have it. David Schwartz offers some additional insight with a link to a white paper for the really curious: Most modern ISPs (last 13 years or so) will not accept traffic from a customer connection with a source IP address they would not route to that customer were it the destination IP address. This is called “reverse path forwarding”. See BCP 38. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Hide public method used to help test a .NET assembly

    - by ChrisW
    I have a .NET assembly, to be released. Its release build includes: A public, documented API of methods which people are supposed to use A public but undocumented API of other methods, which exist only in order to help test the assembly, and which people are not supposed to use The assembly to be released is a custom control, not an application. To regression-test it, I run it in a testing framework/application, which uses (in addition to the public/documented API) some advanced/undocumented methods which are exported from the control. For the public methods which I don't want people to use, I excluded them from the documentation using the <exclude> tag (supported by the Sandcastle Help File Builder), and the [EditorBrowsable] attribute, for example like this: /// <summary> /// Gets a <see cref="IEditorTransaction"/> instance, which helps /// to combine several DOM edits into a single transaction, which /// can be undone and redone as if they were a single, atomic operation. /// </summary> /// <returns>A <see cref="IEditorTransaction"/> instance.</returns> IEditorTransaction createEditorTransaction(); /// <exclude/> [EditorBrowsable(EditorBrowsableState.Never)] void debugDumpBlocks(TextWriter output); This successfully removes the method from the API documentation, and from Intellisense. However, if in a sample application program I right-click on an instance of the interface to see its definition in the metadata, I can still see the method, and the [EditorBrowsable] attribute as well, for example: // Summary: // Gets a ModelText.ModelDom.Nodes.IEditorTransaction instance, which helps // to combine several DOM edits into a single transaction, which can be undone // and redone as if they were a single, atomic operation. // // Returns: // A ModelText.ModelDom.Nodes.IEditorTransaction instance. IEditorTransaction createEditorTransaction(); // [EditorBrowsable(EditorBrowsableState.Never)] void debugDumpBlocks(TextWriter output); Questions: Is there a way to hide a public method, even from the meta data? If not then instead, for this scenario, would you recommend making the methods internal and using the InternalsVisibleTo attribute? Or would you recommend some other way, and if so what and why? Thank you.

    Read the article

  • Windows Server 2003 R2 Terminal Server : Internet Explorer Enhanced Security won't disable for Users

    - by Tubs
    The Internet Explorer Enhanced Security (IEES) won't disable using the normal method of disabling it from the Add/Remove Programs/Windows components. This came to light immediately after testing. IEES was disabled after Terminal Services were installed for admin and users, and after IE8 was installed. My initial thoughts were that there was some clash between IE8 and IE6 (which is the default on 2003 R2), so I uninstalled IE8 and reverted back to IE6. The same symptoms were displayed, when a normal user logged on Internet Explorer Enhnaced Security was enforced. I then thought it could be a problem that Terminal Server wasn't recognising the removal as IEES was on when initially installed. I uninistalled the Terminal Server Componants using the server roles, and then reactivated and deavtived IEES. Windows Server 2003 R2 allows a limited number of users to connect to RDP by default, so I logged on as a normal user, and IEES was disabled. I then reinstalled Terminal Server, and logged on as a normal user. IEES was back enabled. Why is this?

    Read the article

  • No internet connection using Edimax routers

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. I am really lost on how to approach this problem. Possible leads: when I view the network information, I see that my computer is connected to 'Multiple Networks'. One of those is "Network 4" (probably my router), and the other is Unidentified network. I don't know how to make the "Unidentified Network" disappear, or why is it even there in the first place. When I try using "ipconfig", I have two default gateway IPs. The first is 0.0.0.0, and the second is the IP of my router (192.168.2.1). The first router was Edimax BR-6204Wg. The second one I've tried connecting is BR-6424n. Any ideas?

    Read the article

  • Windows 8 - no internet connetction to some hosts while VPN is active

    - by HTD
    I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >