Search Results

Search found 674 results on 27 pages for 'sep o sep'.

Page 17/27 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• What does "cpuid level" mean?

  - by ogzylz

  For an example, I put just output from 1 core of a 16 core machine. What does the output mean by "cpuid level" of "6"? Also, what do "bogomips" of "5992.10" and "clflush size" of "64" mean? processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception: yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment: 128 address sizes: 40 bits physical, 48 bits virtual power management:

  Read the article

• Install VMWare Tools from VMWare Workstation 7.1.1 build-282343 on Debian squeeze: complaint about gcc path not valid

  - by Misha Koshelev

  Dear All: I am trying to install VMWare tools on Debian Squeeze. My error: Before you can compile modules, you need to have the following installed... make gcc kernel headers of the running kernel Searching for GCC... The path "/usr/bin/gcc" is not valid path to the gcc binary. Would you like to change it? [yes] uname -a: Linux debian 2.6.32-5-686 #1 SMP Sat Sep 18 02:14:45 UTC 2010 i686 GNU/Linux dpkg -l | grep make ii make 3.81-8 An utility for Directing compilation. dpkg -l | grep gcc ii gcc 4:4.4.4-2 The GNU C compiler ii gcc-4.4 4.4.4-8 The GNU C compiler ii gcc-4.4-base 4.4.4-8 The GNU Compiler Collection (base package) ii libgcc1 1:4.4.4-8 GCC support library whereis gcc gcc: /usr/bin/gcc /usr/lib/gcc Thank you Misha

  Read the article

• Laptop Charger Not Recognised Properly on Samsung NP900X3F

  - by user193732

  Firstly thanks for your time. Secondly, having an issue with my power charger on my Samsung Series 9 NP900X3F. When I boot into Ubuntu with the charger plugged in it recognises it as charging. When I unplug the charger after this it is still says it is charging. If I suspend in Ubuntu then plug/unplug during this suspended state it recognises it, but not during normal running. If I knew a little more I'm sure I could grab logs and find out what the difference between wake on suspend and normal running is, but alas I need help! I also am having issues with my keyboard backlight via the fn keys, but that I care about far less. Thank you very much. Linux mikey-900X3F 3.12.0-031200rc1-generic #201309161735 SMP Mon Sep 16 21:38:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux (I upgraded my kernel version to remove heinous horizontal artefacts I was getting) Happy to list more info about my system, ima bit of a noob. I did try searching however I can't find any questions at all about my system or related models with the same issue.

  Read the article

• make IIS 7.5 cache static content files over diferent pages

  - by Achilles

  On a Windows 2008 R2, using DNS and IIS I've established my development test server; i.e. I'll have a web application that I can browse on http://test.dev I've moved all the static content files like images, js files and css files into another application which is visible on http://cdn.test.dev test.dev, uses cdn.test.dev urls like http://cdn.test.dev/js/jquery.js to load js, css and images. When I first load "~/" of test.dev, all files will load with a response code of 200; when I press F5 in Firefox, all files, except the "~/default.aspx", will load with 304 response code; but pressing Ctrl+F5 loads them again with a 200 code; if I browse another url like "~/pages/" in test.dev, all of those static files will reload with a 200 code... Is this normal or I'm doing something wrong? Actually, I'm looking for a behavior like this: I want the client to load http://cdn.test.dev/js/jquery.js, only once. I want the client's browser to use this jquery.js file, from cache, in all other pages of test.dev Is this possible? This is the web.config file I have in the root directory of cdn.test.dev: <configuration> <system.webServer> <caching> <profiles> <add extension=".png" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".gif" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".jpg" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".js" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".css" policy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> <add extension=".axd" kernelCachePolicy="CacheUntilChange" varyByHeaders="User-Agent" location="Client" /> </profiles> </caching> <httpProtocol allowKeepAlive="true"> <customHeaders> <add name="Cache-Control" value="public, max-age=31536000" /> </customHeaders> </httpProtocol> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true"> <remove name="RadUploadModule" /> <remove name="RadCompression" /> <add name="RadUploadModule" type="Telerik.Web.UI.RadUploadHttpModule" preCondition="integratedMode" /> <add name="RadCompression" type="Telerik.Web.UI.RadCompression" preCondition="integratedMode" /> </modules> <handlers> <remove name="ChartImage_axd" /> <remove name="Telerik_Web_UI_SpellCheckHandler_axd" /> <remove name="Telerik_Web_UI_DialogHandler_aspx" /> <remove name="Telerik_RadUploadProgressHandler_ashx" /> <remove name="Telerik_Web_UI_WebResource_axd" /> <add name="ChartImage_axd" path="ChartImage.axd" type="Telerik.Web.UI.ChartHttpHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_SpellCheckHandler_axd" path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_DialogHandler_aspx" path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_RadUploadProgressHandler_ashx" path="Telerik.RadUploadProgressHandler.ashx" type="Telerik.Web.UI.RadUploadProgressHandler" verb="*" preCondition="integratedMode" /> <add name="Telerik_Web_UI_WebResource_axd" path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" preCondition="integratedMode" /> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="10485760" /> </requestFiltering> </security> <staticContent> <clientCache cacheControlMode="UseExpires" httpExpires="Wed, 01 Jan 2020 00:00:00 GMT"/> </staticContent> </system.webServer> <appSettings /> <system.web> <compilation debug="false" targetFramework="4.0" /> <pages> <controls> <add tagPrefix="telerik" namespace="Telerik.Web.UI" assembly="Telerik.Web.UI" /> </controls> </pages> <httpHandlers> <add path="ChartImage.axd" type="Telerik.Web.UI.ChartHttpHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" /> <add path="Telerik.RadUploadProgressHandler.ashx" type="Telerik.Web.UI.RadUploadProgressHandler" verb="*" validate="false" /> <add path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" validate="false" /> </httpHandlers> <httpModules> <add name="RadUploadModule" type="Telerik.Web.UI.RadUploadHttpModule" /> <add name="RadCompression" type="Telerik.Web.UI.RadCompression" /> </httpModules> <httpRuntime maxRequestLength="10240" /> </system.web> </configuration> and this is the resulting response header for http://cdn.test.dev/css/global.css: Cache-Control: private,public, max-age=31536000 Content-Type: text/css Content-Encoding: gzip Expires: Wed, 01 Jan 2020 00:00:00 GMT Last-Modified: Mon, 06 Sep 2010 08:53:06 GMT Accept-Ranges: bytes Etag: "0454eca04dcb1:0" Vary: Accept-Encoding Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 06 Sep 2010 14:57:08 GMT Content-Length: 4495

  Read the article

• Ubuntu openGL issues

  - by Dank101

  my OpenGL doesn't work at all i get Xlib: extension "GLX" missing on display ":0". lspci output 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1246] (rev a1) (prog-if 00 [VGA controller]) dmesg | grep -i nvid [ 9.469068] nvidia: module license 'NVIDIA' taints kernel. [ 9.538786] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538792] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538796] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.538803] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.538809] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.538942] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 [10300.955799] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10300.955803] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfff80000) [10300.955807] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001) [10300.955811] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd000000c) [10300.955814] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [10300.955817] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [10300.955820] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x10) [10300.955823] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007) my computer is a dell XPS l702x

  Read the article

• Large keepalive_requests values are severely slowing-down Nginx

  - by Gil

  When running a bacon (43-byte transparent pixel) load test on Nginx, we have tried several keepalive_requests values (from 10 to 100,000) and the optimal value seems to be 10. Here are the server HTTP headers of this tiny reply: HTTP/1.1 200 OK Server: nginx/1.5.6 Date: Wed, 23 Oct 2013 12:39:45 GMT Content-Type: image/gif Content-Length: 43 Last-Modified: Mon, 28 Sep 1970 06:00:00 GMT Connection: keep-alive Nginx is twice slower with keepalive_requests 100000 than with keepalive_requests 10. Can you help understanding that result? Or tell what we do wrong? For reference, here is the nginx.conf file.

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Oracle Identity Management 11gR2 Live Event - New York

  - by Tanu Sood

    Are you in New York or the vicinity on September 6? If so, come join Amit Jasuja, Senior Vice President, Security and Identity Management at Oracle as he discusses the evolution of Oracle identity Management solutions and the business drivers (and industry trends) behind those. You have heard about some of the new experiences delivered with the latest release of Oracle Identity Management - simplified user experience, enhanced security and seamless enablement for secure cloud and mobile environments. Now come see it in action and hear what customers, your peers, are saying about their implementations. This forum will also be a great opportunity for you to connect directly with technology experts and network with industry professionals. There is still time left to register so book your space today. Registration details as well as the agenda for the day can be found here. We look forward to hosting you on Thursday, September 6th. Oracle Identity Management 11gR2 Live Event – New York Thursday, September 6, 2012 Oracle NYC Office 101 Park Avenue 4th Floor New York, NY 10178 Register Here Not in NY on Sep 6? Find an event near you in North America.

  Read the article

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• How can I create a pen drive that I can boot from, and then install Win98 from?

  - by rossmcm

  I have a HP Compaq t5515 thin client computer with a flash disk and USB port. I want to put Win98 onto it, replacing whatever is on there now (I think it is some Linux-based thing). I can find stuff about putting Win98 onto a pen drive and running from that, but I can't find any info about installing Windows 98 from a pen drive onto a sep[arate system. Is it just a matter of making the pen drive bootable to DOS copying the contents of a Win98 installation CD onto the pen drive booting the HP machine from the pen drive running SETUP.EXE from the pen drive? Any pointers appreciated. TIA

  Read the article

• Can't create a file even if rights allow and I've relogged in

  - by stiv

  I try to create file in folder with group write access, user tomcat7 is in group. Why isn't it workin? skr@konrad~/data/asu$ sudo -u tomcat7 sh $ whoami tomcat7 $ echo > /home/skr/data/asu/g.gz.index sh: 2: cannot create /home/skr/data/asu/g.gz.index: Permission denied $ ls -la /home/skr/data/asu/ total 18708 drwxrwxr-x 2 skr skr 4096 Sep 29 08:38 . drwxrwxr-x 85 skr skr 4096 Jul 30 00:42 .. $ grep ^skr /etc/group skr:x:1002:tomcat7:mail Tried to logout, but it doesn't help. Any ideas?

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• Upgrading from MySQL Server to MariaDB

  - by Korrupzion

  I've heard that MariaDB has better performance than MySQL-Server. I'm running software that makes an intensive use of MySQL, thats why I want to try upgrading to MariaDB. Please tell me your experiences doing this conversion, and instructions or tips. Also, which files I should take care of for making a backup of MySQL-Server, so if something goes wrong with MariaDB, I could rollback to MySQL without issues? I would use this but i'm not sure if it's enough to get a full backup of MySQL-Server confs and databases mysqldump --all-databases backup /etc/mysql My Environment: uname -a (Debian Lenny) Linux charizard 2.6.26-2-amd64 #1 SMP Thu Sep 16 15:56:38 UTC 2010 x86_64 GNU/Linux MySQL Server Version: Server version 5.0.51a-24+lenny4 MySQL Client: 5.0.51a Statistics: Threads: 25 Questions: 14690861 Slow queries: 9 Opens: 21428 Flush tables: 1 Open tables: 128 Queries per second avg: 162.666 Uptime: 1 day 1 hour 5 min 13 sec Thanks! PS: Rate my english :D

  Read the article

• XAMPP Closes the Connection and won't let me download anything

  - by Miro Markarian

  I want my XAMPP Apache server to host a zip file (The file is around 250mb) but the server closes the connection and won't let me download the file! However webistes are loading correctly and It seems that the problem is with the extension Does xampp/apache have any file extension limit that they won't let me download .zip and .exe files? Also tested with a smaller .exe file , the problem is still present. It just doesn't let me download any file from the server.!!! Here is the file link to check: Test All I get in the error log is this: Fri Sep 07 23:21:31.742625 2012] [authz_core:debug] [pid 3664:tid 396] mod_authz_core.c(808): [client x.x.x.x:23409] AH01628: authorization result: granted (no directives), referer: http://ammiprox.tk/greeneyes2910/

  Read the article

• My server won't send emails

  - by Tomcomm

  I've been sent here by the people at stackoverflow OK so I know I'm using the right code becuase I have it working on another server but when I try to send an email from a webpage on this particular server using php I get a success message back but the email never gets through. In /var/log/maillog I see Sep 11 14:20:28 ela1 postfix/smtp[11496]: CEE83E151FD: to=[My email address here], relay=none, delay=40, delays=0.08/0.01/40/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=btopenworld.co.uk type=MX: Host not found, try again) Can anyone help?

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• How do I create a rule in Outlook 2010 that moves emails without special headers to a folder?

  - by burnersk

  I like to create a rule in Outlook 2010 that moves emails not containing a special string within the email header field message-id to a folder. How to do that? Pattern: not contains "SPECIAL-STRING". Example E-Mail: ... Date: Fri, 1 Sep 2012 11:16:32 +0100 Message-ID: <bla.bla.bla@SPECIAL-NOT-STRING> MIME-Version: 1.0 ... Hi there :) Pattern matches because "SPECIAL-STRING" is not present (note there is a "NOT" between the words). Automatically moves those emails to folder INBOX/other-mails.

  Read the article

• dist-upgrade runs and completes but current kernel stays the same

  - by jaguare22

  I think that my system is staying at an older kernel version. It seems to update when I run dist-upgrade but the current kernel version doesn't change. Is it possible the system is set to install new kernel updates but only load an older version at start up? $ uname -a Linux HTPC 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:32:50 UTC 2012 i686 athlon i386 GNU/Linux $ dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-32-generic-pae 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-32-virtual 3.2.0-32.51 Linux kernel image for version 3.2.0 on 32 bit x86 Virtual Guests dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' linux-headers-3.2.0-36 linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-37 linux-headers-3.2.0-37-generic-pae linux-headers-3.2.0-38 linux-headers-3.2.0-38-generic-pae linux-headers-3.2.0-39 linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-40 linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-41 linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-43 linux-headers-3.2.0-43-generic-pae linux-headers-3.2.0-44 linux-headers-3.2.0-44-generic-pae linux-headers-3.2.0-45 linux-headers-3.2.0-45-generic-pae linux-headers-3.2.0-48 linux-headers-3.2.0-48-generic-pae

  Read the article

• Too Many Files In Debian Linux Folder?

  - by Dave Potts

  I've been using an external USB drive on a Debian server for backup. The drive is formatted as NTFS and mounted with ntsfmount. This was working fine, but I was filling up a directory with lots of files. Eventually the backup failed. When I then tried to look at the directory using ls it reported: ls: reading directory .: Numerical result out of range Looking in syslog, I also saw this: Sep 23 07:35:31 tosh ntfsmount[28040]: Failed to read index block: Numerical result out of range. Is this simply that I've reached the upper limit of number of files in a directory? If so, is there any way to extend the number of allowed files?

  Read the article

• Reenabling the Spotlight Menubar item in Mac OS X 10.6

  - by Tim Visher

  I believe I followed the instructions here to disable Spotlight indexing and remove the menubar item. I reenabled indexing just fine, but when I changed the permissions back to 744, the spotlight search position came back (as in the space it would normally occupy), but the actual icon and search box will not show up. If I click that portion of the screen I get a blue box, but I can't type anything in to anything. Currently, permissions look like this: [~]$ ll /System/Library/CoreServices/Search.bundle.bak/Contents/MacOS/ total 648 -rwxr-xr-x 1 root wheel 835K Sep 17 14:48 Search* ll is an alias mapped to the following alias ll='${LS_PREAMBLE} -hl' with $LS_PREAMBLE [~]$ echo $LS_PREAMBLE ls -GF (Ignore the .bak extension. I decided that until I found a way to fully restore it, I would just remove it entirely following the directions here) That looks right to me and obviously something is launching, but the UI elements aren't there. So how can I restore it? Thanks in advance!

  Read the article

• iis php internal server error

  - by user1633206

  I developed a website, using php/mysql running at IIS Server as CGI Server API. Suddenly it gives me error 500 after two weeks. It has lot of scripts but index.php home is working. But other script that has header redirection What's wrong with my scripts. livehttp addon of firefox says.. GET /allplans.php?lang=ar&cat=1 HTTP/1.1 Host: www.myhost.com... [edited] User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:14.0) Gecko/20100101 Firefox/14.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Cache-Control: max-age=0 HTTP/1.1 500 Internal Server Error Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 03 Sep 2012 08:09:13 GMT Content-Length: 1208 Connection: Keep-Alive

  Read the article

• Calendar issue in simple java form using swing package?

  - by Rand Mate

  I have created a form using java swing package, For the purpose of adding Date of Birth in the form I have used the following code particularly to add in java Frame via Swing Package. Is there any alternative way to simplify the code. JLabel l2 = new JLabel("Date of Birth"); l2.setBounds(200,160,100,20); String day[] ={"1","2","3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","26","27","28","29","30"}; String month[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; String year[] = {"2012","2011","2010","2009","2008","2007","2006","2005","2004","2003","2002","2001","2000","1999","1998","1997","1996","1995","1994","1993","1992","1991","1990","1989","1988","1987","1986","1985","1984","1983","1982","1981","1980","1979","1976","1975"}; JComboBox cb1 = new JComboBox(day); cb1.setBounds(450,160,50,20); JComboBox cb2 = new JComboBox(month); cb2.setBounds(500,160,50,20); JComboBox cb3 = new JComboBox(year); cb3.setBounds(550,160,60,20);

  Read the article

• linux + automated rsync command

  - by Diana

  my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

  Read the article

• Passenger 'premature end of script headers' error

  - by fatnic

  Hi. I really need help debugging an error I'm getting with Passenger on Apache. I've just made a fresh install of Ubuntu 10.4 and have Apache, Ruby and Passenger installed. I'm trying to run a simple rack app but keep getting this error in my Apache error.log [Tue Sep 28 05:54:41 2010] [error] [client 86.171.2.82] Premature end of script headers: The error then continues with The backend application (process 25574) did not send a valid HTTP response; instead, it sent nothing at all. It is possible that it has crashed; please check whether there are crashing bugs in this application. *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `call' for nil:NilClass) (process 25574): I've tried older versions of passenger also but get the same error. Ubuntu 10.4 Apache 2.2.14 Ruby 1.9.2-p0 Passenger 2.2.15

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >